| /* |
| * AXP20x PMIC USB power supply status driver |
| * |
| * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com> |
| * Copyright (C) 2014 Bruno Prémont <bonbons@linux-vserver.org> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/axp20x.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| #include <linux/iio/consumer.h> |
| #include <linux/workqueue.h> |
| |
| #define DRVNAME "axp20x-usb-power-supply" |
| |
| #define AXP20X_PWR_STATUS_VBUS_PRESENT BIT(5) |
| #define AXP20X_PWR_STATUS_VBUS_USED BIT(4) |
| |
| #define AXP20X_USB_STATUS_VBUS_VALID BIT(2) |
| |
| #define AXP20X_VBUS_VHOLD_uV(b) (4000000 + (((b) >> 3) & 7) * 100000) |
| #define AXP20X_VBUS_VHOLD_MASK GENMASK(5, 3) |
| #define AXP20X_VBUS_VHOLD_OFFSET 3 |
| #define AXP20X_VBUS_CLIMIT_MASK 3 |
| #define AXP20X_VBUS_CLIMIT_900mA 0 |
| #define AXP20X_VBUS_CLIMIT_500mA 1 |
| #define AXP20X_VBUS_CLIMIT_100mA 2 |
| #define AXP20X_VBUS_CLIMIT_NONE 3 |
| |
| #define AXP813_VBUS_CLIMIT_900mA 0 |
| #define AXP813_VBUS_CLIMIT_1500mA 1 |
| #define AXP813_VBUS_CLIMIT_2000mA 2 |
| #define AXP813_VBUS_CLIMIT_2500mA 3 |
| |
| #define AXP20X_ADC_EN1_VBUS_CURR BIT(2) |
| #define AXP20X_ADC_EN1_VBUS_VOLT BIT(3) |
| |
| #define AXP20X_VBUS_MON_VBUS_VALID BIT(3) |
| |
| /* |
| * Note do not raise the debounce time, we must report Vusb high within |
| * 100ms otherwise we get Vbus errors in musb. |
| */ |
| #define DEBOUNCE_TIME msecs_to_jiffies(50) |
| |
| struct axp20x_usb_power { |
| struct device_node *np; |
| struct regmap *regmap; |
| struct power_supply *supply; |
| enum axp20x_variants axp20x_id; |
| struct iio_channel *vbus_v; |
| struct iio_channel *vbus_i; |
| struct delayed_work vbus_detect; |
| unsigned int old_status; |
| }; |
| |
| static irqreturn_t axp20x_usb_power_irq(int irq, void *devid) |
| { |
| struct axp20x_usb_power *power = devid; |
| |
| power_supply_changed(power->supply); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void axp20x_usb_power_poll_vbus(struct work_struct *work) |
| { |
| struct axp20x_usb_power *power = |
| container_of(work, struct axp20x_usb_power, vbus_detect.work); |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &val); |
| if (ret) |
| goto out; |
| |
| val &= (AXP20X_PWR_STATUS_VBUS_PRESENT | AXP20X_PWR_STATUS_VBUS_USED); |
| if (val != power->old_status) |
| power_supply_changed(power->supply); |
| |
| power->old_status = val; |
| |
| out: |
| mod_delayed_work(system_wq, &power->vbus_detect, DEBOUNCE_TIME); |
| } |
| |
| static bool axp20x_usb_vbus_needs_polling(struct axp20x_usb_power *power) |
| { |
| if (power->axp20x_id >= AXP221_ID) |
| return true; |
| |
| return false; |
| } |
| |
| static int axp20x_get_current_max(struct axp20x_usb_power *power, int *val) |
| { |
| unsigned int v; |
| int ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v); |
| |
| if (ret) |
| return ret; |
| |
| switch (v & AXP20X_VBUS_CLIMIT_MASK) { |
| case AXP20X_VBUS_CLIMIT_100mA: |
| if (power->axp20x_id == AXP221_ID) |
| *val = -1; /* No 100mA limit */ |
| else |
| *val = 100000; |
| break; |
| case AXP20X_VBUS_CLIMIT_500mA: |
| *val = 500000; |
| break; |
| case AXP20X_VBUS_CLIMIT_900mA: |
| *val = 900000; |
| break; |
| case AXP20X_VBUS_CLIMIT_NONE: |
| *val = -1; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int axp813_get_current_max(struct axp20x_usb_power *power, int *val) |
| { |
| unsigned int v; |
| int ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v); |
| |
| if (ret) |
| return ret; |
| |
| switch (v & AXP20X_VBUS_CLIMIT_MASK) { |
| case AXP813_VBUS_CLIMIT_900mA: |
| *val = 900000; |
| break; |
| case AXP813_VBUS_CLIMIT_1500mA: |
| *val = 1500000; |
| break; |
| case AXP813_VBUS_CLIMIT_2000mA: |
| *val = 2000000; |
| break; |
| case AXP813_VBUS_CLIMIT_2500mA: |
| *val = 2500000; |
| break; |
| } |
| return 0; |
| } |
| |
| static int axp20x_usb_power_get_property(struct power_supply *psy, |
| enum power_supply_property psp, union power_supply_propval *val) |
| { |
| struct axp20x_usb_power *power = power_supply_get_drvdata(psy); |
| unsigned int input, v; |
| int ret; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v); |
| if (ret) |
| return ret; |
| |
| val->intval = AXP20X_VBUS_VHOLD_uV(v); |
| return 0; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| if (IS_ENABLED(CONFIG_AXP20X_ADC)) { |
| ret = iio_read_channel_processed(power->vbus_v, |
| &val->intval); |
| if (ret) |
| return ret; |
| |
| /* |
| * IIO framework gives mV but Power Supply framework |
| * gives uV. |
| */ |
| val->intval *= 1000; |
| return 0; |
| } |
| |
| ret = axp20x_read_variable_width(power->regmap, |
| AXP20X_VBUS_V_ADC_H, 12); |
| if (ret < 0) |
| return ret; |
| |
| val->intval = ret * 1700; /* 1 step = 1.7 mV */ |
| return 0; |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| if (power->axp20x_id == AXP813_ID) |
| return axp813_get_current_max(power, &val->intval); |
| return axp20x_get_current_max(power, &val->intval); |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| if (IS_ENABLED(CONFIG_AXP20X_ADC)) { |
| ret = iio_read_channel_processed(power->vbus_i, |
| &val->intval); |
| if (ret) |
| return ret; |
| |
| /* |
| * IIO framework gives mA but Power Supply framework |
| * gives uA. |
| */ |
| val->intval *= 1000; |
| return 0; |
| } |
| |
| ret = axp20x_read_variable_width(power->regmap, |
| AXP20X_VBUS_I_ADC_H, 12); |
| if (ret < 0) |
| return ret; |
| |
| val->intval = ret * 375; /* 1 step = 0.375 mA */ |
| return 0; |
| default: |
| break; |
| } |
| |
| /* All the properties below need the input-status reg value */ |
| ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &input); |
| if (ret) |
| return ret; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_HEALTH: |
| if (!(input & AXP20X_PWR_STATUS_VBUS_PRESENT)) { |
| val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; |
| break; |
| } |
| |
| val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| |
| if (power->axp20x_id == AXP202_ID) { |
| ret = regmap_read(power->regmap, |
| AXP20X_USB_OTG_STATUS, &v); |
| if (ret) |
| return ret; |
| |
| if (!(v & AXP20X_USB_STATUS_VBUS_VALID)) |
| val->intval = |
| POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| } |
| break; |
| case POWER_SUPPLY_PROP_PRESENT: |
| val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_PRESENT); |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_USED); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int axp20x_usb_power_set_voltage_min(struct axp20x_usb_power *power, |
| int intval) |
| { |
| int val; |
| |
| switch (intval) { |
| case 4000000: |
| case 4100000: |
| case 4200000: |
| case 4300000: |
| case 4400000: |
| case 4500000: |
| case 4600000: |
| case 4700000: |
| val = (intval - 4000000) / 100000; |
| return regmap_update_bits(power->regmap, |
| AXP20X_VBUS_IPSOUT_MGMT, |
| AXP20X_VBUS_VHOLD_MASK, |
| val << AXP20X_VBUS_VHOLD_OFFSET); |
| default: |
| return -EINVAL; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int axp813_usb_power_set_current_max(struct axp20x_usb_power *power, |
| int intval) |
| { |
| int val; |
| |
| switch (intval) { |
| case 900000: |
| return regmap_update_bits(power->regmap, |
| AXP20X_VBUS_IPSOUT_MGMT, |
| AXP20X_VBUS_CLIMIT_MASK, |
| AXP813_VBUS_CLIMIT_900mA); |
| case 1500000: |
| case 2000000: |
| case 2500000: |
| val = (intval - 1000000) / 500000; |
| return regmap_update_bits(power->regmap, |
| AXP20X_VBUS_IPSOUT_MGMT, |
| AXP20X_VBUS_CLIMIT_MASK, val); |
| default: |
| return -EINVAL; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power, |
| int intval) |
| { |
| int val; |
| |
| switch (intval) { |
| case 100000: |
| if (power->axp20x_id == AXP221_ID) |
| return -EINVAL; |
| /* fall through */ |
| case 500000: |
| case 900000: |
| val = (900000 - intval) / 400000; |
| return regmap_update_bits(power->regmap, |
| AXP20X_VBUS_IPSOUT_MGMT, |
| AXP20X_VBUS_CLIMIT_MASK, val); |
| default: |
| return -EINVAL; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int axp20x_usb_power_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct axp20x_usb_power *power = power_supply_get_drvdata(psy); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| return axp20x_usb_power_set_voltage_min(power, val->intval); |
| |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| if (power->axp20x_id == AXP813_ID) |
| return axp813_usb_power_set_current_max(power, |
| val->intval); |
| return axp20x_usb_power_set_current_max(power, val->intval); |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int axp20x_usb_power_prop_writeable(struct power_supply *psy, |
| enum power_supply_property psp) |
| { |
| return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN || |
| psp == POWER_SUPPLY_PROP_CURRENT_MAX; |
| } |
| |
| static enum power_supply_property axp20x_usb_power_properties[] = { |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_MIN, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_CURRENT_MAX, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| }; |
| |
| static enum power_supply_property axp22x_usb_power_properties[] = { |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_MIN, |
| POWER_SUPPLY_PROP_CURRENT_MAX, |
| }; |
| |
| static const struct power_supply_desc axp20x_usb_power_desc = { |
| .name = "axp20x-usb", |
| .type = POWER_SUPPLY_TYPE_USB, |
| .properties = axp20x_usb_power_properties, |
| .num_properties = ARRAY_SIZE(axp20x_usb_power_properties), |
| .property_is_writeable = axp20x_usb_power_prop_writeable, |
| .get_property = axp20x_usb_power_get_property, |
| .set_property = axp20x_usb_power_set_property, |
| }; |
| |
| static const struct power_supply_desc axp22x_usb_power_desc = { |
| .name = "axp20x-usb", |
| .type = POWER_SUPPLY_TYPE_USB, |
| .properties = axp22x_usb_power_properties, |
| .num_properties = ARRAY_SIZE(axp22x_usb_power_properties), |
| .property_is_writeable = axp20x_usb_power_prop_writeable, |
| .get_property = axp20x_usb_power_get_property, |
| .set_property = axp20x_usb_power_set_property, |
| }; |
| |
| static int configure_iio_channels(struct platform_device *pdev, |
| struct axp20x_usb_power *power) |
| { |
| power->vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v"); |
| if (IS_ERR(power->vbus_v)) { |
| if (PTR_ERR(power->vbus_v) == -ENODEV) |
| return -EPROBE_DEFER; |
| return PTR_ERR(power->vbus_v); |
| } |
| |
| power->vbus_i = devm_iio_channel_get(&pdev->dev, "vbus_i"); |
| if (IS_ERR(power->vbus_i)) { |
| if (PTR_ERR(power->vbus_i) == -ENODEV) |
| return -EPROBE_DEFER; |
| return PTR_ERR(power->vbus_i); |
| } |
| |
| return 0; |
| } |
| |
| static int configure_adc_registers(struct axp20x_usb_power *power) |
| { |
| /* Enable vbus voltage and current measurement */ |
| return regmap_update_bits(power->regmap, AXP20X_ADC_EN1, |
| AXP20X_ADC_EN1_VBUS_CURR | |
| AXP20X_ADC_EN1_VBUS_VOLT, |
| AXP20X_ADC_EN1_VBUS_CURR | |
| AXP20X_ADC_EN1_VBUS_VOLT); |
| } |
| |
| static int axp20x_usb_power_probe(struct platform_device *pdev) |
| { |
| struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); |
| struct power_supply_config psy_cfg = {}; |
| struct axp20x_usb_power *power; |
| static const char * const axp20x_irq_names[] = { "VBUS_PLUGIN", |
| "VBUS_REMOVAL", "VBUS_VALID", "VBUS_NOT_VALID", NULL }; |
| static const char * const axp22x_irq_names[] = { |
| "VBUS_PLUGIN", "VBUS_REMOVAL", NULL }; |
| const char * const *irq_names; |
| const struct power_supply_desc *usb_power_desc; |
| int i, irq, ret; |
| |
| if (!of_device_is_available(pdev->dev.of_node)) |
| return -ENODEV; |
| |
| if (!axp20x) { |
| dev_err(&pdev->dev, "Parent drvdata not set\n"); |
| return -EINVAL; |
| } |
| |
| power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL); |
| if (!power) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, power); |
| power->axp20x_id = (enum axp20x_variants)of_device_get_match_data( |
| &pdev->dev); |
| |
| power->np = pdev->dev.of_node; |
| power->regmap = axp20x->regmap; |
| |
| if (power->axp20x_id == AXP202_ID) { |
| /* Enable vbus valid checking */ |
| ret = regmap_update_bits(power->regmap, AXP20X_VBUS_MON, |
| AXP20X_VBUS_MON_VBUS_VALID, |
| AXP20X_VBUS_MON_VBUS_VALID); |
| if (ret) |
| return ret; |
| |
| if (IS_ENABLED(CONFIG_AXP20X_ADC)) |
| ret = configure_iio_channels(pdev, power); |
| else |
| ret = configure_adc_registers(power); |
| |
| if (ret) |
| return ret; |
| |
| usb_power_desc = &axp20x_usb_power_desc; |
| irq_names = axp20x_irq_names; |
| } else if (power->axp20x_id == AXP221_ID || |
| power->axp20x_id == AXP223_ID || |
| power->axp20x_id == AXP813_ID) { |
| usb_power_desc = &axp22x_usb_power_desc; |
| irq_names = axp22x_irq_names; |
| } else { |
| dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n", |
| axp20x->variant); |
| return -EINVAL; |
| } |
| |
| psy_cfg.of_node = pdev->dev.of_node; |
| psy_cfg.drv_data = power; |
| |
| power->supply = devm_power_supply_register(&pdev->dev, usb_power_desc, |
| &psy_cfg); |
| if (IS_ERR(power->supply)) |
| return PTR_ERR(power->supply); |
| |
| /* Request irqs after registering, as irqs may trigger immediately */ |
| for (i = 0; irq_names[i]; i++) { |
| irq = platform_get_irq_byname(pdev, irq_names[i]); |
| if (irq < 0) { |
| dev_warn(&pdev->dev, "No IRQ for %s: %d\n", |
| irq_names[i], irq); |
| continue; |
| } |
| irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq); |
| ret = devm_request_any_context_irq(&pdev->dev, irq, |
| axp20x_usb_power_irq, 0, DRVNAME, power); |
| if (ret < 0) |
| dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n", |
| irq_names[i], ret); |
| } |
| |
| INIT_DELAYED_WORK(&power->vbus_detect, axp20x_usb_power_poll_vbus); |
| if (axp20x_usb_vbus_needs_polling(power)) |
| queue_delayed_work(system_wq, &power->vbus_detect, 0); |
| |
| return 0; |
| } |
| |
| static int axp20x_usb_power_remove(struct platform_device *pdev) |
| { |
| struct axp20x_usb_power *power = platform_get_drvdata(pdev); |
| |
| cancel_delayed_work_sync(&power->vbus_detect); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id axp20x_usb_power_match[] = { |
| { |
| .compatible = "x-powers,axp202-usb-power-supply", |
| .data = (void *)AXP202_ID, |
| }, { |
| .compatible = "x-powers,axp221-usb-power-supply", |
| .data = (void *)AXP221_ID, |
| }, { |
| .compatible = "x-powers,axp223-usb-power-supply", |
| .data = (void *)AXP223_ID, |
| }, { |
| .compatible = "x-powers,axp813-usb-power-supply", |
| .data = (void *)AXP813_ID, |
| }, { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, axp20x_usb_power_match); |
| |
| static struct platform_driver axp20x_usb_power_driver = { |
| .probe = axp20x_usb_power_probe, |
| .remove = axp20x_usb_power_remove, |
| .driver = { |
| .name = DRVNAME, |
| .of_match_table = axp20x_usb_power_match, |
| }, |
| }; |
| |
| module_platform_driver(axp20x_usb_power_driver); |
| |
| MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); |
| MODULE_DESCRIPTION("AXP20x PMIC USB power supply status driver"); |
| MODULE_LICENSE("GPL"); |