| #ifndef _INC_LIBSBEW_H_ |
| #define _INC_LIBSBEW_H_ |
| |
| /*----------------------------------------------------------------------------- |
| * libsbew.h - common library elements, charge across mulitple boards |
| * |
| * This file contains common Ioctl structures and contents definitions. |
| * |
| * Copyright (C) 2004-2005 SBE, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * For further information, contact via email: support@sbei.com |
| * SBE, Inc. San Ramon, California U.S.A. |
| *----------------------------------------------------------------------------- |
| */ |
| |
| /********************************/ |
| /** set driver logging level **/ |
| /********************************/ |
| |
| /* routine/ioctl: wancfg_set_loglevel() - SBE_IOC_SET_LOGLEVEL */ |
| |
| #define LOG_NONE 0 |
| #define LOG_ERROR 1 |
| #define LOG_SBEBUG3 3 /* hidden, for development/debug usage */ |
| #define LOG_LSCHANGE 5 /* line state change logging */ |
| #define LOG_LSIMMEDIATE 6 /* line state change logging w/o hysterisis */ |
| #define LOG_WARN 8 |
| #define LOG_MONITOR 10 |
| #define LOG_SBEBUG12 12 /* hidden, for development/debug usage */ |
| #define LOG_MONITOR2 14 /* hidden, for development/debug usage */ |
| #define LOG_DEBUG 16 |
| |
| /* TEMPORARY DEFINES *//* RLD DEBUG */ |
| #define c4_LOG_NONE LOG_NONE |
| #define c4_LOG_ERROR LOG_ERROR |
| #define c4_LOG_WARN LOG_WARN |
| #define c4_LOG_sTrace LOG_MONITOR /* do some trace logging into |
| * functions */ |
| #define c4_LOG_DEBUG LOG_DEBUG |
| #define c4_LOG_MAX LOG_DEBUG |
| |
| |
| |
| /******************************/ |
| /** get driver information **/ |
| /******************************/ |
| |
| /* routine/ioctl: wancfg_get_drvinfo() - SBE_IOC_GET_DRVINFO */ |
| |
| #define REL_STRLEN 80 |
| struct sbe_drv_info |
| { |
| int rel_strlen; |
| char release[REL_STRLEN]; |
| }; |
| |
| |
| /*****************************/ |
| /** get board information **/ |
| /*****************************/ |
| |
| /* routine/ioctl: wancfg_get_brdinfo() - SBE_IOC_GET_BRDINFO */ |
| |
| #define CHNM_STRLEN 16 |
| struct sbe_brd_info |
| { |
| u_int32_t brd_id; /* SBE's unique PCI VENDOR/DEVID */ |
| u_int32_t brd_sn; |
| int brd_chan_cnt; /* number of channels being used */ |
| int brd_port_cnt; /* number of ports being used */ |
| unsigned char brdno; /* our board number */ |
| unsigned char brd_pci_speed; /* PCI speed, 33/66Mhz */ |
| u_int8_t brd_mac_addr[6]; |
| char first_iname[CHNM_STRLEN]; /* first assigned channel's |
| * interface name */ |
| char last_iname[CHNM_STRLEN]; /* last assigned channel's |
| * interface name */ |
| u_int8_t brd_hdw_id; /* on/board unique hdw ID */ |
| u_int8_t reserved8[3]; /* alignment preservation */ |
| u_int32_t reserved32[3]; /* size preservation */ |
| }; |
| |
| /* These IDs are sometimes available thru pci_ids.h, but not currently. */ |
| |
| #define PCI_VENDOR_ID_SBE 0x1176 |
| #define PCI_DEVICE_ID_WANPMC_C4T1E1 0x0701 /* BID 0x0X, BTYP 0x0X */ |
| #define PCI_DEVICE_ID_WANPTMC_C4T1E1 0x0702 /* BID 0x41 */ |
| #define PCI_DEVICE_ID_WANADAPT_HC4T1E1 0x0703 /* BID 0x44 */ |
| #define PCI_DEVICE_ID_WANPTMC_256T3_T1 0x0704 /* BID 0x42 (T1 Version) */ |
| #define PCI_DEVICE_ID_WANPCI_C4T1E1 0x0705 /* BID 0x1X, BTYP 0x0X */ |
| #define PCI_DEVICE_ID_WANPMC_C1T3 0x0706 /* BID 0x45 */ |
| #define PCI_DEVICE_ID_WANPCI_C2T1E1 0x0707 /* BID 0x1X, BTYP 0x2X */ |
| #define PCI_DEVICE_ID_WANPCI_C1T1E1 0x0708 /* BID 0x1X, BTYP 0x1X */ |
| #define PCI_DEVICE_ID_WANPMC_C2T1E1 0x0709 /* BID 0x0X, BTYP 0x2X */ |
| #define PCI_DEVICE_ID_WANPMC_C1T1E1 0x070A /* BID 0x0X, BTYP 0x1X */ |
| #define PCI_DEVICE_ID_WANPTMC_256T3_E1 0x070B /* BID 0x46 (E1 Version) */ |
| #define PCI_DEVICE_ID_WANPTMC_C24TE1 0x070C /* BID 0x47 */ |
| #define PCI_DEVICE_ID_WANPMC_C4T1E1_L 0x070D /* BID 0x2X, BTYPE 0x0X w/FP |
| * LEDs */ |
| #define PCI_DEVICE_ID_WANPMC_C2T1E1_L 0x070E /* BID 0x2X, BTYPE 0x2X w/FP |
| * LEDs */ |
| #define PCI_DEVICE_ID_WANPMC_C1T1E1_L 0x070F /* BID 0x2X, BTYPE 0x1X w/FP |
| * LEDs */ |
| #define PCI_DEVICE_ID_WANPMC_2SSI 0x0801 |
| #define PCI_DEVICE_ID_WANPCI_4SSI 0x0802 |
| #define PCI_DEVICE_ID_WANPMC_2T3E3 0x0900 /* BID 0x43 */ |
| #define SBE_BOARD_ID(v,id) ((v<<16) | id) |
| |
| #define BINFO_PCI_SPEED_unk 0 |
| #define BINFO_PCI_SPEED_33 1 |
| #define BINFO_PCI_SPEED_66 2 |
| |
| /***************************/ |
| /** obtain interface ID **/ |
| /***************************/ |
| |
| /* routine/ioctl: wancfg_get_iid() - SBE_IOC_IID_GET */ |
| |
| struct sbe_iid_info |
| { |
| u_int32_t channum; /* channel requested */ |
| char iname[CHNM_STRLEN]; /* channel's interface name */ |
| }; |
| |
| /**************************************/ |
| /** get board address information **/ |
| /**************************************/ |
| |
| /* routine/ioctl: wancfg_get_brdaddr() - SBE_IOC_BRDADDR_GET */ |
| |
| struct sbe_brd_addr |
| { |
| unsigned char func; /* select PCI address space function */ |
| unsigned char brdno; /* returns brdno requested */ |
| unsigned char irq; |
| unsigned char size; /* returns size of address */ |
| #define BRDADDR_SIZE_64 1 |
| #define BRDADDR_SIZE_32 2 |
| int reserved1; /* mod64 align, reserved for future use */ |
| |
| union |
| { |
| unsigned long virt64; /* virtual/mapped address */ |
| u_int32_t virt32[2]; |
| } v; |
| union |
| { |
| unsigned long phys64; /* physical bus address */ |
| u_int32_t phys32[2]; |
| } p; |
| int reserved2[4]; /* reserved for future use */ |
| }; |
| |
| /**********************************/ |
| /** read/write board registers **/ |
| /**********************************/ |
| |
| /* routine/ioctl: wancfg_read_vec() - SBE_IOC_READ_VEC */ |
| /* routine/ioctl: wancfg_write_vec() - SBE_IOC_WRITE_VEC */ |
| |
| struct sbecom_wrt_vec |
| { |
| u_int32_t reg; |
| u_int32_t data; |
| }; |
| |
| #define C1T3_CHIP_MSCC_32 0x01000000 |
| #define C1T3_CHIP_TECT3_8 0x02000000 |
| #define C1T3_CHIP_CPLD_8 0x03000000 |
| #define C1T3_CHIP_EEPROM_8 0x04000000 |
| |
| #define W256T3_CHIP_MUSYCC_32 0x02000000 |
| #define W256T3_CHIP_TEMUX_8 0x10000000 |
| #define W256T3_CHIP_T8110_8 0x20000000 |
| #define W256T3_CHIP_T8110_32 0x22000000 |
| #define W256T3_CHIP_CPLD_8 0x30000000 |
| #define W256T3_CHIP_EEPROM_8 0x40000000 |
| |
| |
| /**********************************/ |
| /** read write port parameters **/ |
| /**********************************/ |
| |
| /* routine/ioctl: wancfg_getset_port_param() - SBE_IOC_PORT_GET */ |
| /* routine/ioctl: wancfg_set_port_param() - SBE_IOC_PORT_SET */ |
| |
| /* NOTE: this structure supports hardware which supports individual per/port control */ |
| |
| struct sbecom_port_param |
| { |
| u_int8_t portnum; |
| u_int8_t port_mode; /* variations of T1 or E1 mode */ |
| u_int8_t portStatus; |
| u_int8_t portP; /* more port parameters (clock source - 0x80; |
| * and LBO - 0xf; */ |
| /* bits 0x70 are reserved for future use ) */ |
| #ifdef SBE_PMCC4_ENABLE |
| u_int32_t hypersize; /* RLD DEBUG - add this in until I learn how to make this entry obsolete */ |
| #endif |
| int reserved[3-1]; /* reserved for future use */ |
| int _res[4]; |
| }; |
| |
| #define CFG_CLK_PORT_MASK 0x80 /* Loop timing */ |
| #define CFG_CLK_PORT_INTERNAL 0x80 /* Loop timing */ |
| #define CFG_CLK_PORT_EXTERNAL 0x00 /* Loop timing */ |
| |
| #define CFG_LBO_MASK 0x0F |
| #define CFG_LBO_unk 0 /* <not defined> */ |
| #define CFG_LBO_LH0 1 /* T1 Long Haul (default) */ |
| #define CFG_LBO_LH7_5 2 /* T1 Long Haul */ |
| #define CFG_LBO_LH15 3 /* T1 Long Haul */ |
| #define CFG_LBO_LH22_5 4 /* T1 Long Haul */ |
| #define CFG_LBO_SH110 5 /* T1 Short Haul */ |
| #define CFG_LBO_SH220 6 /* T1 Short Haul */ |
| #define CFG_LBO_SH330 7 /* T1 Short Haul */ |
| #define CFG_LBO_SH440 8 /* T1 Short Haul */ |
| #define CFG_LBO_SH550 9 /* T1 Short Haul */ |
| #define CFG_LBO_SH660 10 /* T1 Short Haul */ |
| #define CFG_LBO_E75 11 /* E1 75 Ohm */ |
| #define CFG_LBO_E120 12 /* E1 120 Ohm (default) */ |
| |
| |
| /*************************************/ |
| /** read write channel parameters **/ |
| /*************************************/ |
| |
| /* routine/ioctl: wancfg_getset_chan_param() - SBE_IOC_CHAN_GET */ |
| /* routine/ioctl: wancfg_set_chan_param() - SBE_IOC_CHAN_SET */ |
| |
| /* NOTE: this structure supports hardware which supports individual per/channel control */ |
| |
| struct sbecom_chan_param |
| { |
| u_int32_t channum; /* 0: */ |
| #ifdef SBE_PMCC4_ENABLE |
| u_int32_t card; /* RLD DEBUG - add this in until I learn how to make this entry obsolete */ |
| u_int32_t port; /* RLD DEBUG - add this in until I learn how to make this entry obsolete */ |
| u_int8_t bitmask[32]; |
| #endif |
| u_int32_t intr_mask; /* 4: interrupt mask, specify ored |
| * (SS7_)INTR_* to disable */ |
| u_int8_t status; /* 8: channel transceiver status (TX_ENABLED, |
| * RX_ENABLED) */ |
| u_int8_t chan_mode; /* 9: protocol mode */ |
| u_int8_t idlecode; /* A: idle code, in (FLAG_7E, FLAG_FF, |
| * FLAG_00) */ |
| u_int8_t pad_fill_count; /* B: pad fill count (1-127), 0 - pad |
| * fill disabled */ |
| u_int8_t data_inv; /* C: channel data inversion selection */ |
| u_int8_t mode_56k; /* D: 56kbps mode */ |
| u_int8_t reserved[2 + 8]; /* E: */ |
| }; |
| |
| /* SS7 interrupt signals <intr_mask> */ |
| #define SS7_INTR_SFILT 0x00000020 |
| #define SS7_INTR_SDEC 0x00000040 |
| #define SS7_INTR_SINC 0x00000080 |
| #define SS7_INTR_SUERR 0x00000100 |
| /* Other interrupts that can be masked */ |
| #define INTR_BUFF 0x00000002 |
| #define INTR_EOM 0x00000004 |
| #define INTR_MSG 0x00000008 |
| #define INTR_IDLE 0x00000010 |
| |
| /* transceiver status flags <status> */ |
| #define TX_ENABLED 0x01 |
| #define RX_ENABLED 0x02 |
| |
| /* Protocol modes <mode> */ |
| #define CFG_CH_PROTO_TRANS 0 |
| #define CFG_CH_PROTO_SS7 1 |
| #define CFG_CH_PROTO_HDLC_FCS16 2 |
| #define CFG_CH_PROTO_HDLC_FCS32 3 |
| #define CFG_CH_PROTO_ISLP_MODE 4 |
| |
| /* Possible idle code assignments <idlecode> */ |
| #define CFG_CH_FLAG_7E 0 |
| #define CFG_CH_FLAG_FF 1 |
| #define CFG_CH_FLAG_00 2 |
| |
| /* data inversion selection <data_inv> */ |
| #define CFG_CH_DINV_NONE 0x00 |
| #define CFG_CH_DINV_RX 0x01 |
| #define CFG_CH_DINV_TX 0x02 |
| |
| |
| /* Possible resettable chipsets/functions */ |
| #define RESET_DEV_TEMUX 1 |
| #define RESET_DEV_TECT3 RESET_DEV_TEMUX |
| #define RESET_DEV_PLL 2 |
| |
| |
| /*********************************************/ |
| /** read reset channel thruput statistics **/ |
| /*********************************************/ |
| |
| /* routine/ioctl: wancfg_get_chan_stats() - SBE_IOC_CHAN_GET_STAT */ |
| /* routine/ioctl: wancfg_del_chan_stats() - SBE_IOC_CHAN_DEL_STAT */ |
| /* routine/ioctl: wancfg_get_card_chan_stats() - SBE_IOC_CARD_CHAN_STAT */ |
| |
| struct sbecom_chan_stats |
| { |
| unsigned long rx_packets; /* total packets received */ |
| unsigned long tx_packets; /* total packets transmitted */ |
| unsigned long rx_bytes; /* total bytes received */ |
| unsigned long tx_bytes; /* total bytes transmitted */ |
| unsigned long rx_errors;/* bad packets received */ |
| unsigned long tx_errors;/* packet transmit problems */ |
| unsigned long rx_dropped; /* no space in linux buffers */ |
| unsigned long tx_dropped; /* no space available in linux */ |
| |
| /* detailed rx_errors: */ |
| unsigned long rx_length_errors; |
| unsigned long rx_over_errors; /* receiver ring buff overflow */ |
| unsigned long rx_crc_errors; /* recved pkt with crc error */ |
| unsigned long rx_frame_errors; /* recv'd frame alignment error */ |
| unsigned long rx_fifo_errors; /* recv'r fifo overrun */ |
| unsigned long rx_missed_errors; /* receiver missed packet */ |
| |
| /* detailed tx_errors */ |
| unsigned long tx_aborted_errors; |
| unsigned long tx_fifo_errors; |
| unsigned long tx_pending; |
| }; |
| |
| |
| /****************************************/ |
| /** read write card level parameters **/ |
| /****************************************/ |
| |
| /* NOTE: this structure supports hardware which supports per/card control */ |
| |
| struct sbecom_card_param |
| { |
| u_int8_t framing_type; /* 0: CBP or M13 */ |
| u_int8_t loopback; /* 1: one of LOOPBACK_* */ |
| u_int8_t line_build_out; /* 2: boolean */ |
| u_int8_t receive_eq; /* 3: boolean */ |
| u_int8_t transmit_ones; /* 4: boolean */ |
| u_int8_t clock; /* 5: 0 - internal, i>0 - external (recovered |
| * from framer i) */ |
| u_int8_t h110enable; /* 6: */ |
| u_int8_t disable_leds; /* 7: */ |
| u_int8_t reserved1; /* 8: available - old 256t3 hypersized, but |
| * never used */ |
| u_int8_t rear_io; /* 9: rear I/O off/on */ |
| u_int8_t disable_tx; /* A: disable TX off/on */ |
| u_int8_t mute_los; /* B: mute LOS off/on */ |
| u_int8_t los_threshold; /* C: LOS threshold norm/low |
| * (default: norm) */ |
| u_int8_t ds1_mode; /* D: DS1 mode T1/E1 (default: T1) */ |
| u_int8_t ds3_unchan; /* E: DS3 unchannelized mode off/on */ |
| u_int8_t reserved[1 + 16]; /* reserved for expansion - must be |
| * ZERO filled */ |
| }; |
| |
| /* framing types <framing_type> */ |
| #define FRAMING_M13 0 |
| #define FRAMING_CBP 1 |
| |
| /* card level loopback options <loopback> */ |
| #define CFG_CARD_LOOPBACK_NONE 0x00 |
| #define CFG_CARD_LOOPBACK_DIAG 0x01 |
| #define CFG_CARD_LOOPBACK_LINE 0x02 |
| #define CFG_CARD_LOOPBACK_PAYLOAD 0x03 |
| |
| /* line level loopback options <loopback> */ |
| #define CFG_LIU_LOOPBACK_NONE 0x00 |
| #define CFG_LIU_LOOPBACK_ANALOG 0x10 |
| #define CFG_LIU_LOOPBACK_DIGITAL 0x11 |
| #define CFG_LIU_LOOPBACK_REMOTE 0x12 |
| |
| /* card level clock options <clock> */ |
| #define CFG_CLK_INTERNAL 0x00 |
| #define CFG_CLK_EXTERNAL 0x01 |
| |
| /* legacy 256T3 loopback values */ |
| #define LOOPBACK_NONE 0 |
| #define LOOPBACK_LIU_ANALOG 1 |
| #define LOOPBACK_LIU_DIGITAL 2 |
| #define LOOPBACK_FRAMER_DS3 3 |
| #define LOOPBACK_FRAMER_T1 4 |
| #define LOOPBACK_LIU_REMOTE 5 |
| |
| /* DS1 mode <ds1_mode> */ |
| #define CFG_DS1_MODE_MASK 0x0f |
| #define CFG_DS1_MODE_T1 0x00 |
| #define CFG_DS1_MODE_E1 0x01 |
| #define CFG_DS1_MODE_CHANGE 0x80 |
| |
| /* DS3 unchannelized values <ds1_unchan> */ |
| #define CFG_DS3_UNCHAN_MASK 0x01 |
| #define CFG_DS3_UNCHAN_OFF 0x00 |
| #define CFG_DS3_UNCHAN_ON 0x01 |
| |
| |
| /************************************/ |
| /** read write framer parameters **/ |
| /************************************/ |
| |
| /* routine/ioctl: wancfg_get_framer() - SBE_IOC_FRAMER_GET */ |
| /* routine/ioctl: wancfg_set_framer() - SBE_IOC_FRAMER_SET */ |
| |
| struct sbecom_framer_param |
| { |
| u_int8_t framer_num; |
| u_int8_t frame_type; /* SF, ESF, E1PLAIN, E1CAS, E1CRC, E1CRC+CAS */ |
| u_int8_t loopback_type; /* DIGITAL, LINE, PAYLOAD */ |
| u_int8_t auto_alarms;/* auto alarms */ |
| u_int8_t reserved[12]; /* reserved for expansion - must be |
| * ZERO filled */ |
| }; |
| |
| /* frame types <frame_type> */ |
| #define CFG_FRAME_NONE 0 |
| #define CFG_FRAME_SF 1 /* T1 B8ZS */ |
| #define CFG_FRAME_ESF 2 /* T1 B8ZS */ |
| #define CFG_FRAME_E1PLAIN 3 /* HDB3 w/o CAS,CRC */ |
| #define CFG_FRAME_E1CAS 4 /* HDB3 */ |
| #define CFG_FRAME_E1CRC 5 /* HDB3 */ |
| #define CFG_FRAME_E1CRC_CAS 6 /* HDB3 */ |
| #define CFG_FRAME_SF_AMI 7 /* T1 AMI */ |
| #define CFG_FRAME_ESF_AMI 8 /* T1 AMI */ |
| #define CFG_FRAME_E1PLAIN_AMI 9 /* E1 AMI w/o CAS,CRC */ |
| #define CFG_FRAME_E1CAS_AMI 10 /* E1 AMI */ |
| #define CFG_FRAME_E1CRC_AMI 11 /* E1 AMI */ |
| #define CFG_FRAME_E1CRC_CAS_AMI 12 /* E1 AMI */ |
| |
| #define IS_FRAME_ANY_T1(field) \ |
| (((field) == CFG_FRAME_NONE) || \ |
| ((field) == CFG_FRAME_SF) || \ |
| ((field) == CFG_FRAME_ESF) || \ |
| ((field) == CFG_FRAME_SF_AMI) || \ |
| ((field) == CFG_FRAME_ESF_AMI)) |
| |
| #define IS_FRAME_ANY_T1ESF(field) \ |
| (((field) == CFG_FRAME_ESF) || \ |
| ((field) == CFG_FRAME_ESF_AMI)) |
| |
| #define IS_FRAME_ANY_E1(field) \ |
| (((field) == CFG_FRAME_E1PLAIN) || \ |
| ((field) == CFG_FRAME_E1CAS) || \ |
| ((field) == CFG_FRAME_E1CRC) || \ |
| ((field) == CFG_FRAME_E1CRC_CAS) || \ |
| ((field) == CFG_FRAME_E1PLAIN_AMI) || \ |
| ((field) == CFG_FRAME_E1CAS_AMI) || \ |
| ((field) == CFG_FRAME_E1CRC_AMI) || \ |
| ((field) == CFG_FRAME_E1CRC_CAS_AMI)) |
| |
| #define IS_FRAME_ANY_AMI(field) \ |
| (((field) == CFG_FRAME_SF_AMI) || \ |
| ((field) == CFG_FRAME_ESF_AMI) || \ |
| ((field) == CFG_FRAME_E1PLAIN_AMI) || \ |
| ((field) == CFG_FRAME_E1CAS_AMI) || \ |
| ((field) == CFG_FRAME_E1CRC_AMI) || \ |
| ((field) == CFG_FRAME_E1CRC_CAS_AMI)) |
| |
| /* frame level loopback options <loopback_type> */ |
| #define CFG_FRMR_LOOPBACK_NONE 0 |
| #define CFG_FRMR_LOOPBACK_DIAG 1 |
| #define CFG_FRMR_LOOPBACK_LINE 2 |
| #define CFG_FRMR_LOOPBACK_PAYLOAD 3 |
| |
| |
| /****************************************/ |
| /** read reset card error statistics **/ |
| /****************************************/ |
| |
| /* routine/ioctl: wancfg_get_card_stats() - SBE_IOC_CARD_GET_STAT */ |
| /* routine/ioctl: wancfg_del_card_stats() - SBE_IOC_CARD_DEL_STAT */ |
| |
| struct temux_card_stats |
| { |
| struct temux_stats |
| { |
| /* TEMUX DS3 PMON counters */ |
| u_int32_t lcv; |
| u_int32_t err_framing; |
| u_int32_t febe; |
| u_int32_t err_cpbit; |
| u_int32_t err_parity; |
| /* TEMUX DS3 FRMR status */ |
| u_int8_t los; |
| u_int8_t oof; |
| u_int8_t red; |
| u_int8_t yellow; |
| u_int8_t idle; |
| u_int8_t ais; |
| u_int8_t cbit; |
| /* TEMUX DS3 FEAC receiver */ |
| u_int8_t feac; |
| u_int8_t feac_last; |
| } t; |
| u_int32_t tx_pending; /* total */ |
| }; |
| |
| /**************************************************************/ |
| |
| struct wancfg |
| { |
| int cs, ds; |
| char *p; |
| }; |
| typedef struct wancfg wcfg_t; |
| |
| extern wcfg_t *wancfg_init (char *, char *); |
| extern int wancfg_card_blink (wcfg_t *, int); |
| extern int wancfg_ctl (wcfg_t *, int, void *, int, void *, int); |
| extern int wancfg_del_card_stats (wcfg_t *); |
| extern int wancfg_del_chan_stats (wcfg_t *, int); |
| extern int wancfg_enable_ports (wcfg_t *, int); |
| extern int wancfg_free (wcfg_t *); |
| extern int wancfg_get_brdaddr (wcfg_t *, struct sbe_brd_addr *); |
| extern int wancfg_get_brdinfo (wcfg_t *, struct sbe_brd_info *); |
| extern int wancfg_get_card (wcfg_t *, struct sbecom_card_param *); |
| extern int wancfg_get_card_chan_stats (wcfg_t *, struct sbecom_chan_stats *); |
| extern int wancfg_get_card_sn (wcfg_t *); |
| extern int wancfg_get_card_stats (wcfg_t *, struct temux_card_stats *); |
| extern int wancfg_get_chan (wcfg_t *, int, struct sbecom_chan_param *); |
| extern int wancfg_get_chan_stats (wcfg_t *, int, struct sbecom_chan_stats *); |
| extern int wancfg_get_drvinfo (wcfg_t *, int, struct sbe_drv_info *); |
| extern int wancfg_get_framer (wcfg_t *, int, struct sbecom_framer_param *); |
| extern int wancfg_get_iid (wcfg_t *, int, struct sbe_iid_info *); |
| extern int wancfg_get_sn (wcfg_t *, unsigned int *); |
| extern int wancfg_read (wcfg_t *, int, struct sbecom_wrt_vec *); |
| extern int wancfg_reset_device (wcfg_t *, int); |
| extern int wancfg_set_card (wcfg_t *, struct sbecom_card_param *); |
| extern int wancfg_set_chan (wcfg_t *, int, struct sbecom_chan_param *); |
| extern int wancfg_set_framer (wcfg_t *, int, struct sbecom_framer_param *); |
| extern int wancfg_set_loglevel (wcfg_t *, uint); |
| extern int wancfg_write (wcfg_t *, int, struct sbecom_wrt_vec *); |
| |
| #ifdef NOT_YET_COMMON |
| extern int wancfg_get_tsioc (wcfg_t *, struct wanc1t3_ts_hdr *, struct wanc1t3_ts_param *); |
| extern int wancfg_set_tsioc (wcfg_t *, struct wanc1t3_ts_param *); |
| #endif |
| |
| #endif /*** _INC_LIBSBEW_H_ ***/ |
