| /* |
| * DaVinci Ethernet Medium Access Controller |
| * |
| * DaVinci EMAC is based upon CPPI 3.0 TI DMA engine |
| * |
| * Copyright (C) 2009 Texas Instruments. |
| * |
| * --------------------------------------------------------------------------- |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * --------------------------------------------------------------------------- |
| * History: |
| * 0-5 A number of folks worked on this driver in bits and pieces but the major |
| * contribution came from Suraj Iyer and Anant Gole |
| * 6.0 Anant Gole - rewrote the driver as per Linux conventions |
| * 6.1 Chaithrika U S - added support for Gigabit and RMII features, |
| * PHY layer usage |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/errno.h> |
| #include <linux/in.h> |
| #include <linux/ioport.h> |
| #include <linux/slab.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/ethtool.h> |
| #include <linux/highmem.h> |
| #include <linux/proc_fs.h> |
| #include <linux/ctype.h> |
| #include <linux/spinlock.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/clk.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/semaphore.h> |
| #include <linux/phy.h> |
| #include <linux/bitops.h> |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/davinci_emac.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <linux/of_mdio.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_net.h> |
| #include <linux/mfd/syscon.h> |
| |
| #include <asm/irq.h> |
| #include <asm/page.h> |
| |
| #include "cpsw.h" |
| #include "davinci_cpdma.h" |
| |
| static int debug_level; |
| module_param(debug_level, int, 0); |
| MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)"); |
| |
| /* Netif debug messages possible */ |
| #define DAVINCI_EMAC_DEBUG (NETIF_MSG_DRV | \ |
| NETIF_MSG_PROBE | \ |
| NETIF_MSG_LINK | \ |
| NETIF_MSG_TIMER | \ |
| NETIF_MSG_IFDOWN | \ |
| NETIF_MSG_IFUP | \ |
| NETIF_MSG_RX_ERR | \ |
| NETIF_MSG_TX_ERR | \ |
| NETIF_MSG_TX_QUEUED | \ |
| NETIF_MSG_INTR | \ |
| NETIF_MSG_TX_DONE | \ |
| NETIF_MSG_RX_STATUS | \ |
| NETIF_MSG_PKTDATA | \ |
| NETIF_MSG_HW | \ |
| NETIF_MSG_WOL) |
| |
| /* version info */ |
| #define EMAC_MAJOR_VERSION 6 |
| #define EMAC_MINOR_VERSION 1 |
| #define EMAC_MODULE_VERSION "6.1" |
| MODULE_VERSION(EMAC_MODULE_VERSION); |
| static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; |
| |
| /* Configuration items */ |
| #define EMAC_DEF_PASS_CRC (0) /* Do not pass CRC up to frames */ |
| #define EMAC_DEF_QOS_EN (0) /* EMAC proprietary QoS disabled */ |
| #define EMAC_DEF_NO_BUFF_CHAIN (0) /* No buffer chain */ |
| #define EMAC_DEF_MACCTRL_FRAME_EN (0) /* Discard Maccontrol frames */ |
| #define EMAC_DEF_SHORT_FRAME_EN (0) /* Discard short frames */ |
| #define EMAC_DEF_ERROR_FRAME_EN (0) /* Discard error frames */ |
| #define EMAC_DEF_PROM_EN (0) /* Promiscuous disabled */ |
| #define EMAC_DEF_PROM_CH (0) /* Promiscuous channel is 0 */ |
| #define EMAC_DEF_BCAST_EN (1) /* Broadcast enabled */ |
| #define EMAC_DEF_BCAST_CH (0) /* Broadcast channel is 0 */ |
| #define EMAC_DEF_MCAST_EN (1) /* Multicast enabled */ |
| #define EMAC_DEF_MCAST_CH (0) /* Multicast channel is 0 */ |
| |
| #define EMAC_DEF_TXPRIO_FIXED (1) /* TX Priority is fixed */ |
| #define EMAC_DEF_TXPACING_EN (0) /* TX pacing NOT supported*/ |
| |
| #define EMAC_DEF_BUFFER_OFFSET (0) /* Buffer offset to DMA (future) */ |
| #define EMAC_DEF_MIN_ETHPKTSIZE (60) /* Minimum ethernet pkt size */ |
| #define EMAC_DEF_MAX_FRAME_SIZE (1500 + 14 + 4 + 4) |
| #define EMAC_DEF_TX_CH (0) /* Default 0th channel */ |
| #define EMAC_DEF_RX_CH (0) /* Default 0th channel */ |
| #define EMAC_DEF_RX_NUM_DESC (128) |
| #define EMAC_DEF_MAX_TX_CH (1) /* Max TX channels configured */ |
| #define EMAC_DEF_MAX_RX_CH (1) /* Max RX channels configured */ |
| #define EMAC_POLL_WEIGHT (64) /* Default NAPI poll weight */ |
| |
| /* Buffer descriptor parameters */ |
| #define EMAC_DEF_TX_MAX_SERVICE (32) /* TX max service BD's */ |
| #define EMAC_DEF_RX_MAX_SERVICE (64) /* should = netdev->weight */ |
| |
| /* EMAC register related defines */ |
| #define EMAC_ALL_MULTI_REG_VALUE (0xFFFFFFFF) |
| #define EMAC_NUM_MULTICAST_BITS (64) |
| #define EMAC_TX_CONTROL_TX_ENABLE_VAL (0x1) |
| #define EMAC_RX_CONTROL_RX_ENABLE_VAL (0x1) |
| #define EMAC_MAC_HOST_ERR_INTMASK_VAL (0x2) |
| #define EMAC_RX_UNICAST_CLEAR_ALL (0xFF) |
| #define EMAC_INT_MASK_CLEAR (0xFF) |
| |
| /* RX MBP register bit positions */ |
| #define EMAC_RXMBP_PASSCRC_MASK BIT(30) |
| #define EMAC_RXMBP_QOSEN_MASK BIT(29) |
| #define EMAC_RXMBP_NOCHAIN_MASK BIT(28) |
| #define EMAC_RXMBP_CMFEN_MASK BIT(24) |
| #define EMAC_RXMBP_CSFEN_MASK BIT(23) |
| #define EMAC_RXMBP_CEFEN_MASK BIT(22) |
| #define EMAC_RXMBP_CAFEN_MASK BIT(21) |
| #define EMAC_RXMBP_PROMCH_SHIFT (16) |
| #define EMAC_RXMBP_PROMCH_MASK (0x7 << 16) |
| #define EMAC_RXMBP_BROADEN_MASK BIT(13) |
| #define EMAC_RXMBP_BROADCH_SHIFT (8) |
| #define EMAC_RXMBP_BROADCH_MASK (0x7 << 8) |
| #define EMAC_RXMBP_MULTIEN_MASK BIT(5) |
| #define EMAC_RXMBP_MULTICH_SHIFT (0) |
| #define EMAC_RXMBP_MULTICH_MASK (0x7) |
| #define EMAC_RXMBP_CHMASK (0x7) |
| |
| /* EMAC register definitions/bit maps used */ |
| # define EMAC_MBP_RXPROMISC (0x00200000) |
| # define EMAC_MBP_PROMISCCH(ch) (((ch) & 0x7) << 16) |
| # define EMAC_MBP_RXBCAST (0x00002000) |
| # define EMAC_MBP_BCASTCHAN(ch) (((ch) & 0x7) << 8) |
| # define EMAC_MBP_RXMCAST (0x00000020) |
| # define EMAC_MBP_MCASTCHAN(ch) ((ch) & 0x7) |
| |
| /* EMAC mac_control register */ |
| #define EMAC_MACCONTROL_TXPTYPE BIT(9) |
| #define EMAC_MACCONTROL_TXPACEEN BIT(6) |
| #define EMAC_MACCONTROL_GMIIEN BIT(5) |
| #define EMAC_MACCONTROL_GIGABITEN BIT(7) |
| #define EMAC_MACCONTROL_FULLDUPLEXEN BIT(0) |
| #define EMAC_MACCONTROL_RMIISPEED_MASK BIT(15) |
| |
| /* GIGABIT MODE related bits */ |
| #define EMAC_DM646X_MACCONTORL_GIG BIT(7) |
| #define EMAC_DM646X_MACCONTORL_GIGFORCE BIT(17) |
| |
| /* EMAC mac_status register */ |
| #define EMAC_MACSTATUS_TXERRCODE_MASK (0xF00000) |
| #define EMAC_MACSTATUS_TXERRCODE_SHIFT (20) |
| #define EMAC_MACSTATUS_TXERRCH_MASK (0x7) |
| #define EMAC_MACSTATUS_TXERRCH_SHIFT (16) |
| #define EMAC_MACSTATUS_RXERRCODE_MASK (0xF000) |
| #define EMAC_MACSTATUS_RXERRCODE_SHIFT (12) |
| #define EMAC_MACSTATUS_RXERRCH_MASK (0x7) |
| #define EMAC_MACSTATUS_RXERRCH_SHIFT (8) |
| |
| /* EMAC RX register masks */ |
| #define EMAC_RX_MAX_LEN_MASK (0xFFFF) |
| #define EMAC_RX_BUFFER_OFFSET_MASK (0xFFFF) |
| |
| /* MAC_IN_VECTOR (0x180) register bit fields */ |
| #define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT BIT(17) |
| #define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT BIT(16) |
| #define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC BIT(8) |
| #define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC BIT(0) |
| |
| /** NOTE:: For DM646x the IN_VECTOR has changed */ |
| #define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH) |
| #define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC BIT(16 + EMAC_DEF_TX_CH) |
| #define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT BIT(26) |
| #define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT BIT(27) |
| |
| /* CPPI bit positions */ |
| #define EMAC_CPPI_SOP_BIT BIT(31) |
| #define EMAC_CPPI_EOP_BIT BIT(30) |
| #define EMAC_CPPI_OWNERSHIP_BIT BIT(29) |
| #define EMAC_CPPI_EOQ_BIT BIT(28) |
| #define EMAC_CPPI_TEARDOWN_COMPLETE_BIT BIT(27) |
| #define EMAC_CPPI_PASS_CRC_BIT BIT(26) |
| #define EMAC_RX_BD_BUF_SIZE (0xFFFF) |
| #define EMAC_BD_LENGTH_FOR_CACHE (16) /* only CPPI bytes */ |
| #define EMAC_RX_BD_PKT_LENGTH_MASK (0xFFFF) |
| |
| /* Max hardware defines */ |
| #define EMAC_MAX_TXRX_CHANNELS (8) /* Max hardware channels */ |
| #define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */ |
| |
| /* EMAC Peripheral Device Register Memory Layout structure */ |
| #define EMAC_MACINVECTOR 0x90 |
| |
| #define EMAC_DM646X_MACEOIVECTOR 0x94 |
| |
| #define EMAC_MACINTSTATRAW 0xB0 |
| #define EMAC_MACINTSTATMASKED 0xB4 |
| #define EMAC_MACINTMASKSET 0xB8 |
| #define EMAC_MACINTMASKCLEAR 0xBC |
| |
| #define EMAC_RXMBPENABLE 0x100 |
| #define EMAC_RXUNICASTSET 0x104 |
| #define EMAC_RXUNICASTCLEAR 0x108 |
| #define EMAC_RXMAXLEN 0x10C |
| #define EMAC_RXBUFFEROFFSET 0x110 |
| #define EMAC_RXFILTERLOWTHRESH 0x114 |
| |
| #define EMAC_MACCONTROL 0x160 |
| #define EMAC_MACSTATUS 0x164 |
| #define EMAC_EMCONTROL 0x168 |
| #define EMAC_FIFOCONTROL 0x16C |
| #define EMAC_MACCONFIG 0x170 |
| #define EMAC_SOFTRESET 0x174 |
| #define EMAC_MACSRCADDRLO 0x1D0 |
| #define EMAC_MACSRCADDRHI 0x1D4 |
| #define EMAC_MACHASH1 0x1D8 |
| #define EMAC_MACHASH2 0x1DC |
| #define EMAC_MACADDRLO 0x500 |
| #define EMAC_MACADDRHI 0x504 |
| #define EMAC_MACINDEX 0x508 |
| |
| /* EMAC statistics registers */ |
| #define EMAC_RXGOODFRAMES 0x200 |
| #define EMAC_RXBCASTFRAMES 0x204 |
| #define EMAC_RXMCASTFRAMES 0x208 |
| #define EMAC_RXPAUSEFRAMES 0x20C |
| #define EMAC_RXCRCERRORS 0x210 |
| #define EMAC_RXALIGNCODEERRORS 0x214 |
| #define EMAC_RXOVERSIZED 0x218 |
| #define EMAC_RXJABBER 0x21C |
| #define EMAC_RXUNDERSIZED 0x220 |
| #define EMAC_RXFRAGMENTS 0x224 |
| #define EMAC_RXFILTERED 0x228 |
| #define EMAC_RXQOSFILTERED 0x22C |
| #define EMAC_RXOCTETS 0x230 |
| #define EMAC_TXGOODFRAMES 0x234 |
| #define EMAC_TXBCASTFRAMES 0x238 |
| #define EMAC_TXMCASTFRAMES 0x23C |
| #define EMAC_TXPAUSEFRAMES 0x240 |
| #define EMAC_TXDEFERRED 0x244 |
| #define EMAC_TXCOLLISION 0x248 |
| #define EMAC_TXSINGLECOLL 0x24C |
| #define EMAC_TXMULTICOLL 0x250 |
| #define EMAC_TXEXCESSIVECOLL 0x254 |
| #define EMAC_TXLATECOLL 0x258 |
| #define EMAC_TXUNDERRUN 0x25C |
| #define EMAC_TXCARRIERSENSE 0x260 |
| #define EMAC_TXOCTETS 0x264 |
| #define EMAC_NETOCTETS 0x280 |
| #define EMAC_RXSOFOVERRUNS 0x284 |
| #define EMAC_RXMOFOVERRUNS 0x288 |
| #define EMAC_RXDMAOVERRUNS 0x28C |
| |
| /* EMAC DM644x control registers */ |
| #define EMAC_CTRL_EWCTL (0x4) |
| #define EMAC_CTRL_EWINTTCNT (0x8) |
| |
| /* EMAC DM644x control module masks */ |
| #define EMAC_DM644X_EWINTCNT_MASK 0x1FFFF |
| #define EMAC_DM644X_INTMIN_INTVL 0x1 |
| #define EMAC_DM644X_INTMAX_INTVL (EMAC_DM644X_EWINTCNT_MASK) |
| |
| /* EMAC DM646X control module registers */ |
| #define EMAC_DM646X_CMINTCTRL 0x0C |
| #define EMAC_DM646X_CMRXINTEN 0x14 |
| #define EMAC_DM646X_CMTXINTEN 0x18 |
| #define EMAC_DM646X_CMRXINTMAX 0x70 |
| #define EMAC_DM646X_CMTXINTMAX 0x74 |
| |
| /* EMAC DM646X control module masks */ |
| #define EMAC_DM646X_INTPACEEN (0x3 << 16) |
| #define EMAC_DM646X_INTPRESCALE_MASK (0x7FF << 0) |
| #define EMAC_DM646X_CMINTMAX_CNT 63 |
| #define EMAC_DM646X_CMINTMIN_CNT 2 |
| #define EMAC_DM646X_CMINTMAX_INTVL (1000 / EMAC_DM646X_CMINTMIN_CNT) |
| #define EMAC_DM646X_CMINTMIN_INTVL ((1000 / EMAC_DM646X_CMINTMAX_CNT) + 1) |
| |
| |
| /* EMAC EOI codes for C0 */ |
| #define EMAC_DM646X_MAC_EOI_C0_RXEN (0x01) |
| #define EMAC_DM646X_MAC_EOI_C0_TXEN (0x02) |
| |
| /* EMAC Stats Clear Mask */ |
| #define EMAC_STATS_CLR_MASK (0xFFFFFFFF) |
| |
| /* emac_priv: EMAC private data structure |
| * |
| * EMAC adapter private data structure |
| */ |
| struct emac_priv { |
| u32 msg_enable; |
| struct net_device *ndev; |
| struct platform_device *pdev; |
| struct napi_struct napi; |
| char mac_addr[6]; |
| void __iomem *remap_addr; |
| u32 emac_base_phys; |
| void __iomem *emac_base; |
| void __iomem *ctrl_base; |
| struct cpdma_ctlr *dma; |
| struct cpdma_chan *txchan; |
| struct cpdma_chan *rxchan; |
| u32 link; /* 1=link on, 0=link off */ |
| u32 speed; /* 0=Auto Neg, 1=No PHY, 10,100, 1000 - mbps */ |
| u32 duplex; /* Link duplex: 0=Half, 1=Full */ |
| u32 rx_buf_size; |
| u32 isr_count; |
| u32 coal_intvl; |
| u32 bus_freq_mhz; |
| u8 rmii_en; |
| u8 version; |
| u32 mac_hash1; |
| u32 mac_hash2; |
| u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS]; |
| u32 rx_addr_type; |
| const char *phy_id; |
| struct device_node *phy_node; |
| spinlock_t lock; |
| /*platform specific members*/ |
| void (*int_enable) (void); |
| void (*int_disable) (void); |
| }; |
| |
| /* EMAC TX Host Error description strings */ |
| static char *emac_txhost_errcodes[16] = { |
| "No error", "SOP error", "Ownership bit not set in SOP buffer", |
| "Zero Next Buffer Descriptor Pointer Without EOP", |
| "Zero Buffer Pointer", "Zero Buffer Length", "Packet Length Error", |
| "Reserved", "Reserved", "Reserved", "Reserved", "Reserved", |
| "Reserved", "Reserved", "Reserved", "Reserved" |
| }; |
| |
| /* EMAC RX Host Error description strings */ |
| static char *emac_rxhost_errcodes[16] = { |
| "No error", "Reserved", "Ownership bit not set in input buffer", |
| "Reserved", "Zero Buffer Pointer", "Reserved", "Reserved", |
| "Reserved", "Reserved", "Reserved", "Reserved", "Reserved", |
| "Reserved", "Reserved", "Reserved", "Reserved" |
| }; |
| |
| /* Helper macros */ |
| #define emac_read(reg) ioread32(priv->emac_base + (reg)) |
| #define emac_write(reg, val) iowrite32(val, priv->emac_base + (reg)) |
| |
| #define emac_ctrl_read(reg) ioread32((priv->ctrl_base + (reg))) |
| #define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg))) |
| |
| /** |
| * emac_get_drvinfo - Get EMAC driver information |
| * @ndev: The DaVinci EMAC network adapter |
| * @info: ethtool info structure containing name and version |
| * |
| * Returns EMAC driver information (name and version) |
| * |
| */ |
| static void emac_get_drvinfo(struct net_device *ndev, |
| struct ethtool_drvinfo *info) |
| { |
| strlcpy(info->driver, emac_version_string, sizeof(info->driver)); |
| strlcpy(info->version, EMAC_MODULE_VERSION, sizeof(info->version)); |
| } |
| |
| /** |
| * emac_get_coalesce - Get interrupt coalesce settings for this device |
| * @ndev : The DaVinci EMAC network adapter |
| * @coal : ethtool coalesce settings structure |
| * |
| * Fetch the current interrupt coalesce settings |
| * |
| */ |
| static int emac_get_coalesce(struct net_device *ndev, |
| struct ethtool_coalesce *coal) |
| { |
| struct emac_priv *priv = netdev_priv(ndev); |
| |
| coal->rx_coalesce_usecs = priv->coal_intvl; |
| return 0; |
| |
| } |
| |
| /** |
| * emac_set_coalesce - Set interrupt coalesce settings for this device |
| * @ndev : The DaVinci EMAC network adapter |
| * @coal : ethtool coalesce settings structure |
| * |
| * Set interrupt coalesce parameters |
| * |
| */ |
| static int emac_set_coalesce(struct net_device *ndev, |
| struct ethtool_coalesce *coal) |
| { |
| struct emac_priv *priv = netdev_priv(ndev); |
| u32 int_ctrl, num_interrupts = 0; |
| u32 prescale = 0, addnl_dvdr = 1, coal_intvl = 0; |
| |
| if (!coal->rx_coalesce_usecs) |
| return -EINVAL; |
| |
| coal_intvl = coal->rx_coalesce_usecs; |
| |
| switch (priv->version) { |
| case EMAC_VERSION_2: |
| int_ctrl = emac_ctrl_read(EMAC_DM646X_CMINTCTRL); |
| prescale = priv->bus_freq_mhz * 4; |
| |
| if (coal_intvl < EMAC_DM646X_CMINTMIN_INTVL) |
| coal_intvl = EMAC_DM646X_CMINTMIN_INTVL; |
| |
| if (coal_intvl > EMAC_DM646X_CMINTMAX_INTVL) { |
| /* |
| * Interrupt pacer works with 4us Pulse, we can |
| * throttle further by dilating the 4us pulse. |
| */ |
| addnl_dvdr = EMAC_DM646X_INTPRESCALE_MASK / prescale; |
| |
| if (addnl_dvdr > 1) { |
| prescale *= addnl_dvdr; |
| if (coal_intvl > (EMAC_DM646X_CMINTMAX_INTVL |
| * addnl_dvdr)) |
| coal_intvl = (EMAC_DM646X_CMINTMAX_INTVL |
| * addnl_dvdr); |
| } else { |
| addnl_dvdr = 1; |
| coal_intvl = EMAC_DM646X_CMINTMAX_INTVL; |
| } |
| } |
| |
| num_interrupts = (1000 * addnl_dvdr) / coal_intvl; |
| |
| int_ctrl |= EMAC_DM646X_INTPACEEN; |
| int_ctrl &= (~EMAC_DM646X_INTPRESCALE_MASK); |
| int_ctrl |= (prescale & EMAC_DM646X_INTPRESCALE_MASK); |
| emac_ctrl_write(EMAC_DM646X_CMINTCTRL, int_ctrl); |
| |
| emac_ctrl_write(EMAC_DM646X_CMRXINTMAX, num_interrupts); |
| emac_ctrl_write(EMAC_DM646X_CMTXINTMAX, num_interrupts); |
| |
| break; |
| default: |
| int_ctrl = emac_ctrl_read(EMAC_CTRL_EWINTTCNT); |
| int_ctrl &= (~EMAC_DM644X_EWINTCNT_MASK); |
| prescale = coal_intvl * priv->bus_freq_mhz; |
| if (prescale > EMAC_DM644X_EWINTCNT_MASK) { |
| prescale = EMAC_DM644X_EWINTCNT_MASK; |
| coal_intvl = prescale / priv->bus_freq_mhz; |
| } |
| emac_ctrl_write(EMAC_CTRL_EWINTTCNT, (int_ctrl | prescale)); |
| |
| break; |
| } |
| |
| printk(KERN_INFO"Set coalesce to %d usecs.\n", coal_intvl); |
| priv->coal_intvl = coal_intvl; |
| |
| return 0; |
| |
| } |
| |
| |
| /* ethtool_ops: DaVinci EMAC Ethtool structure |
| * |
| * Ethtool support for EMAC adapter |
| */ |
| static const struct ethtool_ops ethtool_ops = { |
| .get_drvinfo = emac_get_drvinfo, |
| .get_link = ethtool_op_get_link, |
| .get_coalesce = emac_get_coalesce, |
| .set_coalesce = emac_set_coalesce, |
| .get_ts_info = ethtool_op_get_ts_info, |
| .get_link_ksettings = phy_ethtool_get_link_ksettings, |
| .set_link_ksettings = phy_ethtool_set_link_ksettings, |
| }; |
| |
| /** |
| * emac_update_phystatus - Update Phy status |
| * @priv: The DaVinci EMAC private adapter structure |
| * |
| * Updates phy status and takes action for network queue if required |
| * based upon link status |
| * |
| */ |
| static void emac_update_phystatus(struct emac_priv *priv) |
| { |
| u32 mac_control; |
| u32 new_duplex; |
| u32 cur_duplex; |
| struct net_device *ndev = priv->ndev; |
| |
| mac_control = emac_read(EMAC_MACCONTROL); |
| cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ? |
| DUPLEX_FULL : DUPLEX_HALF; |
| if (ndev->phydev) |
| new_duplex = ndev->phydev->duplex; |
| else |
| new_duplex = DUPLEX_FULL; |
| |
| /* We get called only if link has changed (speed/duplex/status) */ |
| if ((priv->link) && (new_duplex != cur_duplex)) { |
| priv->duplex = new_duplex; |
| if (DUPLEX_FULL == priv->duplex) |
| mac_control |= (EMAC_MACCONTROL_FULLDUPLEXEN); |
| else |
| mac_control &= ~(EMAC_MACCONTROL_FULLDUPLEXEN); |
| } |
| |
| if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) { |
| mac_control = emac_read(EMAC_MACCONTROL); |
| mac_control |= (EMAC_DM646X_MACCONTORL_GIG | |
| EMAC_DM646X_MACCONTORL_GIGFORCE); |
| } else { |
| /* Clear the GIG bit and GIGFORCE bit */ |
| mac_control &= ~(EMAC_DM646X_MACCONTORL_GIGFORCE | |
| EMAC_DM646X_MACCONTORL_GIG); |
| |
| if (priv->rmii_en && (priv->speed == SPEED_100)) |
| mac_control |= EMAC_MACCONTROL_RMIISPEED_MASK; |
| else |
| mac_control &= ~EMAC_MACCONTROL_RMIISPEED_MASK; |
| } |
| |
| /* Update mac_control if changed */ |
| emac_write(EMAC_MACCONTROL, mac_control); |
| |
| if (priv->link) { |
| /* link ON */ |
| if (!netif_carrier_ok(ndev)) |
| netif_carrier_on(ndev); |
| /* reactivate the transmit queue if it is stopped */ |
| if (netif_running(ndev) && netif_queue_stopped(ndev)) |
| netif_wake_queue(ndev); |
| } else { |
| /* link OFF */ |
| if (netif_carrier_ok(ndev)) |
| netif_carrier_off(ndev); |
| if (!netif_queue_stopped(ndev)) |
| netif_stop_queue(ndev); |
| } |
| } |
| |
| /** |
| * hash_get - Calculate hash value from mac address |
| * @addr: mac address to delete from hash table |
| * |
| * Calculates hash value from mac address |
| * |
| */ |
| static u32 hash_get(u8 *addr) |
| { |
| u32 hash; |
| u8 tmpval; |
| int cnt; |
| hash = 0; |
| |
| for (cnt = 0; cnt < 2; cnt++) { |
| tmpval = *addr++; |
| hash ^= (tmpval >> 2) ^ (tmpval << 4); |
| tmpval = *addr++; |
| hash ^= (tmpval >> 4) ^ (tmpval << 2); |
| tmpval = *addr++; |
| hash ^= (tmpval >> 6) ^ (tmpval); |
| } |
| |
| return hash & 0x3F; |
| } |
| |
| /** |
| * emac_hash_add - Hash function to add mac addr from hash table |
| * @priv: The DaVinci EMAC private adapter structure |
| * @mac_addr: mac address to delete from hash table |
| * |
| * Adds mac address to the internal hash table |
| * |
| */ |
| static int emac_hash_add(struct emac_priv *priv, u8 *mac_addr) |
| { |
| struct device *emac_dev = &priv->ndev->dev; |
| u32 rc = 0; |
| u32 hash_bit; |
| u32 hash_value = hash_get(mac_addr); |
| |
| if (hash_value >= EMAC_NUM_MULTICAST_BITS) { |
| if (netif_msg_drv(priv)) { |
| dev_err(emac_dev, "DaVinci EMAC: emac_hash_add(): Invalid "\ |
| "Hash %08x, should not be greater than %08x", |
| hash_value, (EMAC_NUM_MULTICAST_BITS - 1)); |
| } |
| return -1; |
| } |
| |
| /* set the hash bit only if not previously set */ |
| if (priv->multicast_hash_cnt[hash_value] == 0) { |
| rc = 1; /* hash value changed */ |
| if (hash_value < 32) { |
| hash_bit = BIT(hash_value); |
| priv->mac_hash1 |= hash_bit; |
| } else { |
| hash_bit = BIT((hash_value - 32)); |
| priv->mac_hash2 |= hash_bit; |
| } |
| } |
| |
| /* incr counter for num of mcast addr's mapped to "this" hash bit */ |
| ++priv->multicast_hash_cnt[hash_value]; |
| |
| return rc; |
| } |
| |
| /** |
| * emac_hash_del - Hash function to delete mac addr from hash table |
| * @priv: The DaVinci EMAC private adapter structure |
| * @mac_addr: mac address to delete from hash table |
| * |
| * Removes mac address from the internal hash table |
| * |
| */ |
| static int emac_hash_del(struct emac_priv *priv, u8 *mac_addr) |
| { |
| u32 hash_value; |
| u32 hash_bit; |
| |
| hash_value = hash_get(mac_addr); |
| if (priv->multicast_hash_cnt[hash_value] > 0) { |
| /* dec cntr for num of mcast addr's mapped to this hash bit */ |
| --priv->multicast_hash_cnt[hash_value]; |
| } |
| |
| /* if counter still > 0, at least one multicast address refers |
| * to this hash bit. so return 0 */ |
| if (priv->multicast_hash_cnt[hash_value] > 0) |
| return 0; |
| |
| if (hash_value < 32) { |
| hash_bit = BIT(hash_value); |
| priv->mac_hash1 &= ~hash_bit; |
| } else { |
| hash_bit = BIT((hash_value - 32)); |
| priv->mac_hash2 &= ~hash_bit; |
| } |
| |
| /* return 1 to indicate change in mac_hash registers reqd */ |
| return 1; |
| } |
| |
| /* EMAC multicast operation */ |
| #define EMAC_MULTICAST_ADD 0 |
| #define EMAC_MULTICAST_DEL 1 |
| #define EMAC_ALL_MULTI_SET 2 |
| #define EMAC_ALL_MULTI_CLR 3 |
| |
| /** |
| * emac_add_mcast - Set multicast address in the EMAC adapter (Internal) |
| * @priv: The DaVinci EMAC private adapter structure |
| * @action: multicast operation to perform |
| * mac_addr: mac address to set |
| * |
| * Set multicast addresses in EMAC adapter - internal function |
| * |
| */ |
| static void emac_add_mcast(struct emac_priv *priv, u32 action, u8 *mac_addr) |
| { |
| struct device *emac_dev = &priv->ndev->dev; |
| int update = -1; |
| |
| switch (action) { |
| case EMAC_MULTICAST_ADD: |
| update = emac_hash_add(priv, mac_addr); |
| break; |
| case EMAC_MULTICAST_DEL: |
| update = emac_hash_del(priv, mac_addr); |
| break; |
| case EMAC_ALL_MULTI_SET: |
| update = 1; |
| priv->mac_hash1 = EMAC_ALL_MULTI_REG_VALUE; |
| priv->mac_hash2 = EMAC_ALL_MULTI_REG_VALUE; |
| break; |
| case EMAC_ALL_MULTI_CLR: |
| update = 1; |
| priv->mac_hash1 = 0; |
| priv->mac_hash2 = 0; |
| memset(&(priv->multicast_hash_cnt[0]), 0, |
| sizeof(priv->multicast_hash_cnt[0]) * |
| EMAC_NUM_MULTICAST_BITS); |
| break; |
| default: |
| if (netif_msg_drv(priv)) |
| dev_err(emac_dev, "DaVinci EMAC: add_mcast"\ |
| ": bad operation %d", action); |
| break; |
| } |
| |
| /* write to the hardware only if the register status chances */ |
| if (update > 0) { |
| emac_write(EMAC_MACHASH1, priv->mac_hash1); |
| emac_write(EMAC_MACHASH2, priv->mac_hash2); |
| } |
| } |
| |
| /** |
| * emac_dev_mcast_set - Set multicast address in the EMAC adapter |
| * @ndev: The DaVinci EMAC network adapter |
| * |
| * Set multicast addresses in EMAC adapter |
| * |
| */ |
| static void emac_dev_mcast_set(struct net_device *ndev) |
| { |
| u32 mbp_enable; |
| struct emac_priv *priv = netdev_priv(ndev); |
| |
| mbp_enable = emac_read(EMAC_RXMBPENABLE); |
| if (ndev->flags & IFF_PROMISC) { |
| mbp_enable &= (~EMAC_MBP_PROMISCCH(EMAC_DEF_PROM_CH)); |
| mbp_enable |= (EMAC_MBP_RXPROMISC); |
| } else { |
| mbp_enable = (mbp_enable & ~EMAC_MBP_RXPROMISC); |
| if ((ndev->flags & IFF_ALLMULTI) || |
| netdev_mc_count(ndev) > EMAC_DEF_MAX_MULTICAST_ADDRESSES) { |
| mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); |
| emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL); |
| } else if (!netdev_mc_empty(ndev)) { |
| struct netdev_hw_addr *ha; |
| |
| mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); |
| emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL); |
| /* program multicast address list into EMAC hardware */ |
| netdev_for_each_mc_addr(ha, ndev) { |
| emac_add_mcast(priv, EMAC_MULTICAST_ADD, |
| (u8 *) ha->addr); |
| } |
| } else { |
| mbp_enable = (mbp_enable & ~EMAC_MBP_RXMCAST); |
| emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL); |
| } |
| } |
| /* Set mbp config register */ |
| emac_write(EMAC_RXMBPENABLE, mbp_enable); |
| } |
| |
| /************************************************************************* |
| * EMAC Hardware manipulation |
| *************************************************************************/ |
| |
| /** |
| * emac_int_disable - Disable EMAC module interrupt (from adapter) |
| * @priv: The DaVinci EMAC private adapter structure |
| * |
| * Disable EMAC interrupt on the adapter |
| * |
| */ |
| static void emac_int_disable(struct emac_priv *priv) |
| { |
| if (priv->version == EMAC_VERSION_2) { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| /* Program C0_Int_En to zero to turn off |
| * interrupts to the CPU */ |
| emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0); |
| emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0); |
| /* NOTE: Rx Threshold and Misc interrupts are not disabled */ |
| if (priv->int_disable) |
| priv->int_disable(); |
| |
| /* NOTE: Rx Threshold and Misc interrupts are not enabled */ |
| |
| /* ack rxen only then a new pulse will be generated */ |
| emac_write(EMAC_DM646X_MACEOIVECTOR, |
| EMAC_DM646X_MAC_EOI_C0_RXEN); |
| |
| /* ack txen- only then a new pulse will be generated */ |
| emac_write(EMAC_DM646X_MACEOIVECTOR, |
| EMAC_DM646X_MAC_EOI_C0_TXEN); |
| |
| local_irq_restore(flags); |
| |
| } else { |
| /* Set DM644x control registers for interrupt control */ |
| emac_ctrl_write(EMAC_CTRL_EWCTL, 0x0); |
| } |
| } |
| |
| /** |
| * emac_int_enable - Enable EMAC module interrupt (from adapter) |
| * @priv: The DaVinci EMAC private adapter structure |
| * |
| * Enable EMAC interrupt on the adapter |
| * |
| */ |
| static void emac_int_enable(struct emac_priv *priv) |
| { |
| if (priv->version == EMAC_VERSION_2) { |
| if (priv->int_enable) |
| priv->int_enable(); |
| |
| emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff); |
| emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff); |
| |
| /* In addition to turning on interrupt Enable, we need |
| * ack by writing appropriate values to the EOI |
| * register */ |
| |
| /* NOTE: Rx Threshold and Misc interrupts are not enabled */ |
| } else { |
| /* Set DM644x control registers for interrupt control */ |
| emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1); |
| } |
| } |
| |
| /** |
| * emac_irq - EMAC interrupt handler |
| * @irq: interrupt number |
| * @dev_id: EMAC network adapter data structure ptr |
| * |
| * EMAC Interrupt handler - we only schedule NAPI and not process any packets |
| * here. EVen the interrupt status is checked (TX/RX/Err) in NAPI poll function |
| * |
| * Returns interrupt handled condition |
| */ |
| static irqreturn_t emac_irq(int irq, void *dev_id) |
| { |
| struct net_device *ndev = (struct net_device *)dev_id; |
| struct emac_priv *priv = netdev_priv(ndev); |
| |
| ++priv->isr_count; |
| if (likely(netif_running(priv->ndev))) { |
| emac_int_disable(priv); |
| napi_schedule(&priv->napi); |
| } else { |
| /* we are closing down, so dont process anything */ |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static struct sk_buff *emac_rx_alloc(struct emac_priv *priv) |
| { |
| struct sk_buff *skb = netdev_alloc_skb(priv->ndev, priv->rx_buf_size); |
| if (WARN_ON(!skb)) |
| return NULL; |
| skb_reserve(skb, NET_IP_ALIGN); |
| return skb; |
| } |
| |
| static void emac_rx_handler(void *token, int len, int status) |
| { |
| struct sk_buff *skb = token; |
| struct net_device *ndev = skb->dev; |
| struct emac_priv *priv = netdev_priv(ndev); |
| struct device *emac_dev = &ndev->dev; |
| int ret; |
| |
| /* free and bail if we are shutting down */ |
| if (unlikely(!netif_running(ndev))) { |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| |
| /* recycle on receive error */ |
| if (status < 0) { |
| ndev->stats.rx_errors++; |
| goto recycle; |
| } |
| |
| /* feed received packet up the stack */ |
| skb_put(skb, len); |
| skb->protocol = eth_type_trans(skb, ndev); |
| netif_receive_skb(skb); |
| ndev->stats.rx_bytes += len; |
| ndev->stats.rx_packets++; |
| |
| /* alloc a new packet for receive */ |
| skb = emac_rx_alloc(priv); |
| if (!skb) { |
| if (netif_msg_rx_err(priv) && net_ratelimit()) |
| dev_err(emac_dev, "failed rx buffer alloc\n"); |
| return; |
| } |
| |
| recycle: |
| ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, |
| skb_tailroom(skb), 0); |
| |
| WARN_ON(ret == -ENOMEM); |
| if (unlikely(ret < 0)) |
| dev_kfree_skb_any(skb); |
| } |
| |
| static void emac_tx_handler(void *token, int len, int status) |
| { |
| struct sk_buff *skb = token; |
| struct net_device *ndev = skb->dev; |
| |
| /* Check whether the queue is stopped due to stalled tx dma, if the |
| * queue is stopped then start the queue as we have free desc for tx |
| */ |
| if (unlikely(netif_queue_stopped(ndev))) |
| netif_wake_queue(ndev); |
| ndev->stats.tx_packets++; |
| ndev->stats.tx_bytes += len; |
| dev_kfree_skb_any(skb); |
| } |
| |
| /** |
| * emac_dev_xmit - EMAC Transmit function |
| * @skb: SKB pointer |
| * @ndev: The DaVinci EMAC network adapter |
| * |
| * Called by the system to transmit a packet - we queue the packet in |
| * EMAC hardware transmit queue |
| * |
| * Returns success(NETDEV_TX_OK) or error code (typically out of desc's) |
| */ |
| static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev) |
| { |
| struct device *emac_dev = &ndev->dev; |
| int ret_code; |
| struct emac_priv *priv = netdev_priv(ndev); |
| |
| /* If no link, return */ |
| if (unlikely(!priv->link)) { |
| if (netif_msg_tx_err(priv) && net_ratelimit()) |
| dev_err(emac_dev, "DaVinci EMAC: No link to transmit"); |
| goto fail_tx; |
| } |
| |
| ret_code = skb_padto(skb, EMAC_DEF_MIN_ETHPKTSIZE); |
| if (unlikely(ret_code < 0)) { |
| if (netif_msg_tx_err(priv) && net_ratelimit()) |
| dev_err(emac_dev, "DaVinci EMAC: packet pad failed"); |
| goto fail_tx; |
| } |
| |
| skb_tx_timestamp(skb); |
| |
| ret_code = cpdma_chan_submit(priv->txchan, skb, skb->data, skb->len, |
| 0); |
| if (unlikely(ret_code != 0)) { |
| if (netif_msg_tx_err(priv) && net_ratelimit()) |
| dev_err(emac_dev, "DaVinci EMAC: desc submit failed"); |
| goto fail_tx; |
| } |
| |
| /* If there is no more tx desc left free then we need to |
| * tell the kernel to stop sending us tx frames. |
| */ |
| if (unlikely(!cpdma_check_free_tx_desc(priv->txchan))) |
| netif_stop_queue(ndev); |
| |
| return NETDEV_TX_OK; |
| |
| fail_tx: |
| ndev->stats.tx_dropped++; |
| netif_stop_queue(ndev); |
| return NETDEV_TX_BUSY; |
| } |
| |
| /** |
| * emac_dev_tx_timeout - EMAC Transmit timeout function |
| * @ndev: The DaVinci EMAC network adapter |
| * |
| * Called when system detects that a skb timeout period has expired |
| * potentially due to a fault in the adapter in not being able to send |
| * it out on the wire. We teardown the TX channel assuming a hardware |
| * error and re-initialize the TX channel for hardware operation |
| * |
| */ |
| static void emac_dev_tx_timeout(struct net_device *ndev) |
| { |
| struct emac_priv *priv = netdev_priv(ndev); |
| struct device *emac_dev = &ndev->dev; |
| |
| if (netif_msg_tx_err(priv)) |
| dev_err(emac_dev, "DaVinci EMAC: xmit timeout, restarting TX"); |
| |
| ndev->stats.tx_errors++; |
| emac_int_disable(priv); |
| cpdma_chan_stop(priv->txchan); |
| cpdma_chan_start(priv->txchan); |
| emac_int_enable(priv); |
| } |
| |
| /** |
| * emac_set_type0addr - Set EMAC Type0 mac address |
| * @priv: The DaVinci EMAC private adapter structure |
| * @ch: RX channel number |
| * @mac_addr: MAC address to set in device |
| * |
| * Called internally to set Type0 mac address of the adapter (Device) |
| * |
| * Returns success (0) or appropriate error code (none as of now) |
| */ |
| static void emac_set_type0addr(struct emac_priv *priv, u32 ch, char *mac_addr) |
| { |
| u32 val; |
| val = ((mac_addr[5] << 8) | (mac_addr[4])); |
| emac_write(EMAC_MACSRCADDRLO, val); |
| |
| val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ |
| (mac_addr[1] << 8) | (mac_addr[0])); |
| emac_write(EMAC_MACSRCADDRHI, val); |
| val = emac_read(EMAC_RXUNICASTSET); |
| val |= BIT(ch); |
| emac_write(EMAC_RXUNICASTSET, val); |
| val = emac_read(EMAC_RXUNICASTCLEAR); |
| val &= ~BIT(ch); |
| emac_write(EMAC_RXUNICASTCLEAR, val); |
| } |
| |
| /** |
| * emac_set_type1addr - Set EMAC Type1 mac address |
| * @priv: The DaVinci EMAC private adapter structure |
| * @ch: RX channel number |
| * @mac_addr: MAC address to set in device |
| * |
| * Called internally to set Type1 mac address of the adapter (Device) |
| * |
| * Returns success (0) or appropriate error code (none as of now) |
| */ |
| static void emac_set_type1addr(struct emac_priv *priv, u32 ch, char *mac_addr) |
| { |
| u32 val; |
| emac_write(EMAC_MACINDEX, ch); |
| val = ((mac_addr[5] << 8) | mac_addr[4]); |
| emac_write(EMAC_MACADDRLO, val); |
| val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ |
| (mac_addr[1] << 8) | (mac_addr[0])); |
| emac_write(EMAC_MACADDRHI, val); |
| emac_set_type0addr(priv, ch, mac_addr); |
| } |
| |
| /** |
| * emac_set_type2addr - Set EMAC Type2 mac address |
| * @priv: The DaVinci EMAC private adapter structure |
| * @ch: RX channel number |
| * @mac_addr: MAC address to set in device |
| * @index: index into RX address entries |
| * @match: match parameter for RX address matching logic |
| * |
| * Called internally to set Type2 mac address of the adapter (Device) |
| * |
| * Returns success (0) or appropriate error code (none as of now) |
| */ |
| static void emac_set_type2addr(struct emac_priv *priv, u32 ch, |
| char *mac_addr, int index, int match) |
| { |
| u32 val; |
| emac_write(EMAC_MACINDEX, index); |
| val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ |
| (mac_addr[1] << 8) | (mac_addr[0])); |
| emac_write(EMAC_MACADDRHI, val); |
| val = ((mac_addr[5] << 8) | mac_addr[4] | ((ch & 0x7) << 16) | \ |
| (match << 19) | BIT(20)); |
| emac_write(EMAC_MACADDRLO, val); |
| emac_set_type0addr(priv, ch, mac_addr); |
| } |
| |
| /** |
| * emac_setmac - Set mac address in the adapter (internal function) |
| * @priv: The DaVinci EMAC private adapter structure |
| * @ch: RX channel number |
| * @mac_addr: MAC address to set in device |
| * |
| * Called internally to set the mac address of the adapter (Device) |
| * |
| * Returns success (0) or appropriate error code (none as of now) |
| */ |
| static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr) |
| { |
| struct device *emac_dev = &priv->ndev->dev; |
| |
| if (priv->rx_addr_type == 0) { |
| emac_set_type0addr(priv, ch, mac_addr); |
| } else if (priv->rx_addr_type == 1) { |
| u32 cnt; |
| for (cnt = 0; cnt < EMAC_MAX_TXRX_CHANNELS; cnt++) |
| emac_set_type1addr(priv, ch, mac_addr); |
| } else if (priv->rx_addr_type == 2) { |
| emac_set_type2addr(priv, ch, mac_addr, ch, 1); |
| emac_set_type0addr(priv, ch, mac_addr); |
| } else { |
| if (netif_msg_drv(priv)) |
| dev_err(emac_dev, "DaVinci EMAC: Wrong addressing\n"); |
| } |
| } |
| |
| /** |
| * emac_dev_setmac_addr - Set mac address in the adapter |
| * @ndev: The DaVinci EMAC network adapter |
| * @addr: MAC address to set in device |
| * |
| * Called by the system to set the mac address of the adapter (Device) |
| * |
| * Returns success (0) or appropriate error code (none as of now) |
| */ |
| static int emac_dev_setmac_addr(struct net_device *ndev, void *addr) |
| { |
| struct emac_priv *priv = netdev_priv(ndev); |
| struct device *emac_dev = &priv->ndev->dev; |
| struct sockaddr *sa = addr; |
| |
| if (!is_valid_ether_addr(sa->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| /* Store mac addr in priv and rx channel and set it in EMAC hw */ |
| memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len); |
| memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len); |
| |
| /* MAC address is configured only after the interface is enabled. */ |
| if (netif_running(ndev)) { |
| emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr); |
| } |
| |
| if (netif_msg_drv(priv)) |
| dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n", |
| priv->mac_addr); |
| |
| return 0; |
| } |
| |
| /** |
| * emac_hw_enable - Enable EMAC hardware for packet transmission/reception |
| * @priv: The DaVinci EMAC private adapter structure |
| * |
| * Enables EMAC hardware for packet processing - enables PHY, enables RX |
| * for packet reception and enables device interrupts and then NAPI |
| * |
| * Returns success (0) or appropriate error code (none right now) |
| */ |
| static int emac_hw_enable(struct emac_priv *priv) |
| { |
| u32 val, mbp_enable, mac_control; |
| |
| /* Soft reset */ |
| emac_write(EMAC_SOFTRESET, 1); |
| while (emac_read(EMAC_SOFTRESET)) |
| cpu_relax(); |
| |
| /* Disable interrupt & Set pacing for more interrupts initially */ |
| emac_int_disable(priv); |
| |
| /* Full duplex enable bit set when auto negotiation happens */ |
| mac_control = |
| (((EMAC_DEF_TXPRIO_FIXED) ? (EMAC_MACCONTROL_TXPTYPE) : 0x0) | |
| ((priv->speed == 1000) ? EMAC_MACCONTROL_GIGABITEN : 0x0) | |
| ((EMAC_DEF_TXPACING_EN) ? (EMAC_MACCONTROL_TXPACEEN) : 0x0) | |
| ((priv->duplex == DUPLEX_FULL) ? 0x1 : 0)); |
| emac_write(EMAC_MACCONTROL, mac_control); |
| |
| mbp_enable = |
| (((EMAC_DEF_PASS_CRC) ? (EMAC_RXMBP_PASSCRC_MASK) : 0x0) | |
| ((EMAC_DEF_QOS_EN) ? (EMAC_RXMBP_QOSEN_MASK) : 0x0) | |
| ((EMAC_DEF_NO_BUFF_CHAIN) ? (EMAC_RXMBP_NOCHAIN_MASK) : 0x0) | |
| ((EMAC_DEF_MACCTRL_FRAME_EN) ? (EMAC_RXMBP_CMFEN_MASK) : 0x0) | |
| ((EMAC_DEF_SHORT_FRAME_EN) ? (EMAC_RXMBP_CSFEN_MASK) : 0x0) | |
| ((EMAC_DEF_ERROR_FRAME_EN) ? (EMAC_RXMBP_CEFEN_MASK) : 0x0) | |
| ((EMAC_DEF_PROM_EN) ? (EMAC_RXMBP_CAFEN_MASK) : 0x0) | |
| ((EMAC_DEF_PROM_CH & EMAC_RXMBP_CHMASK) << \ |
| EMAC_RXMBP_PROMCH_SHIFT) | |
| ((EMAC_DEF_BCAST_EN) ? (EMAC_RXMBP_BROADEN_MASK) : 0x0) | |
| ((EMAC_DEF_BCAST_CH & EMAC_RXMBP_CHMASK) << \ |
| EMAC_RXMBP_BROADCH_SHIFT) | |
| ((EMAC_DEF_MCAST_EN) ? (EMAC_RXMBP_MULTIEN_MASK) : 0x0) | |
| ((EMAC_DEF_MCAST_CH & EMAC_RXMBP_CHMASK) << \ |
| EMAC_RXMBP_MULTICH_SHIFT)); |
| emac_write(EMAC_RXMBPENABLE, mbp_enable); |
| emac_write(EMAC_RXMAXLEN, (EMAC_DEF_MAX_FRAME_SIZE & |
| EMAC_RX_MAX_LEN_MASK)); |
| emac_write(EMAC_RXBUFFEROFFSET, (EMAC_DEF_BUFFER_OFFSET & |
| EMAC_RX_BUFFER_OFFSET_MASK)); |
| emac_write(EMAC_RXFILTERLOWTHRESH, 0); |
| emac_write(EMAC_RXUNICASTCLEAR, EMAC_RX_UNICAST_CLEAR_ALL); |
| priv->rx_addr_type = (emac_read(EMAC_MACCONFIG) >> 8) & 0xFF; |
| |
| emac_write(EMAC_MACINTMASKSET, EMAC_MAC_HOST_ERR_INTMASK_VAL); |
| |
| emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr); |
| |
| /* Enable MII */ |
| val = emac_read(EMAC_MACCONTROL); |
| val |= (EMAC_MACCONTROL_GMIIEN); |
| emac_write(EMAC_MACCONTROL, val); |
| |
| /* Enable NAPI and interrupts */ |
| napi_enable(&priv->napi); |
| emac_int_enable(priv); |
| return 0; |
| |
| } |
| |
| /** |
| * emac_poll - EMAC NAPI Poll function |
| * @ndev: The DaVinci EMAC network adapter |
| * @budget: Number of receive packets to process (as told by NAPI layer) |
| * |
| * NAPI Poll function implemented to process packets as per budget. We check |
| * the type of interrupt on the device and accordingly call the TX or RX |
| * packet processing functions. We follow the budget for RX processing and |
| * also put a cap on number of TX pkts processed through config param. The |
| * NAPI schedule function is called if more packets pending. |
| * |
| * Returns number of packets received (in most cases; else TX pkts - rarely) |
| */ |
| static int emac_poll(struct napi_struct *napi, int budget) |
| { |
| unsigned int mask; |
| struct emac_priv *priv = container_of(napi, struct emac_priv, napi); |
| struct net_device *ndev = priv->ndev; |
| struct device *emac_dev = &ndev->dev; |
| u32 status = 0; |
| u32 num_tx_pkts = 0, num_rx_pkts = 0; |
| |
| /* Check interrupt vectors and call packet processing */ |
| status = emac_read(EMAC_MACINVECTOR); |
| |
| mask = EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC; |
| |
| if (priv->version == EMAC_VERSION_2) |
| mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC; |
| |
| if (status & mask) { |
| num_tx_pkts = cpdma_chan_process(priv->txchan, |
| EMAC_DEF_TX_MAX_SERVICE); |
| } /* TX processing */ |
| |
| mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC; |
| |
| if (priv->version == EMAC_VERSION_2) |
| mask = EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC; |
| |
| if (status & mask) { |
| num_rx_pkts = cpdma_chan_process(priv->rxchan, budget); |
| } /* RX processing */ |
| |
| mask = EMAC_DM644X_MAC_IN_VECTOR_HOST_INT; |
| if (priv->version == EMAC_VERSION_2) |
| mask = EMAC_DM646X_MAC_IN_VECTOR_HOST_INT; |
| |
| if (unlikely(status & mask)) { |
| u32 ch, cause; |
| dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n"); |
| netif_stop_queue(ndev); |
| napi_disable(&priv->napi); |
| |
| status = emac_read(EMAC_MACSTATUS); |
| cause = ((status & EMAC_MACSTATUS_TXERRCODE_MASK) >> |
| EMAC_MACSTATUS_TXERRCODE_SHIFT); |
| if (cause) { |
| ch = ((status & EMAC_MACSTATUS_TXERRCH_MASK) >> |
| EMAC_MACSTATUS_TXERRCH_SHIFT); |
| if (net_ratelimit()) { |
| dev_err(emac_dev, "TX Host error %s on ch=%d\n", |
| &emac_txhost_errcodes[cause][0], ch); |
| } |
| } |
| cause = ((status & EMAC_MACSTATUS_RXERRCODE_MASK) >> |
| EMAC_MACSTATUS_RXERRCODE_SHIFT); |
| if (cause) { |
| ch = ((status & EMAC_MACSTATUS_RXERRCH_MASK) >> |
| EMAC_MACSTATUS_RXERRCH_SHIFT); |
| if (netif_msg_hw(priv) && net_ratelimit()) |
| dev_err(emac_dev, "RX Host error %s on ch=%d\n", |
| &emac_rxhost_errcodes[cause][0], ch); |
| } |
| } else if (num_rx_pkts < budget) { |
| napi_complete_done(napi, num_rx_pkts); |
| emac_int_enable(priv); |
| } |
| |
| return num_rx_pkts; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| /** |
| * emac_poll_controller - EMAC Poll controller function |
| * @ndev: The DaVinci EMAC network adapter |
| * |
| * Polled functionality used by netconsole and others in non interrupt mode |
| * |
| */ |
| static void emac_poll_controller(struct net_device *ndev) |
| { |
| struct emac_priv *priv = netdev_priv(ndev); |
| |
| emac_int_disable(priv); |
| emac_irq(ndev->irq, ndev); |
| emac_int_enable(priv); |
| } |
| #endif |
| |
| static void emac_adjust_link(struct net_device *ndev) |
| { |
| struct emac_priv *priv = netdev_priv(ndev); |
| struct phy_device *phydev = ndev->phydev; |
| unsigned long flags; |
| int new_state = 0; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| if (phydev->link) { |
| /* check the mode of operation - full/half duplex */ |
| if (phydev->duplex != priv->duplex) { |
| new_state = 1; |
| priv->duplex = phydev->duplex; |
| } |
| if (phydev->speed != priv->speed) { |
| new_state = 1; |
| priv->speed = phydev->speed; |
| } |
| if (!priv->link) { |
| new_state = 1; |
| priv->link = 1; |
| } |
| |
| } else if (priv->link) { |
| new_state = 1; |
| priv->link = 0; |
| priv->speed = 0; |
| priv->duplex = ~0; |
| } |
| if (new_state) { |
| emac_update_phystatus(priv); |
| phy_print_status(ndev->phydev); |
| } |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } |
| |
| /************************************************************************* |
| * Linux Driver Model |
| *************************************************************************/ |
| |
| /** |
| * emac_devioctl - EMAC adapter ioctl |
| * @ndev: The DaVinci EMAC network adapter |
| * @ifrq: request parameter |
| * @cmd: command parameter |
| * |
| * EMAC driver ioctl function |
| * |
| * Returns success(0) or appropriate error code |
| */ |
| static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) |
| { |
| if (!(netif_running(ndev))) |
| return -EINVAL; |
| |
| /* TODO: Add phy read and write and private statistics get feature */ |
| |
| if (ndev->phydev) |
| return phy_mii_ioctl(ndev->phydev, ifrq, cmd); |
| else |
| return -EOPNOTSUPP; |
| } |
| |
| /** |
| * emac_dev_open - EMAC device open |
| * @ndev: The DaVinci EMAC network adapter |
| * |
| * Called when system wants to start the interface. We init TX/RX channels |
| * and enable the hardware for packet reception/transmission and start the |
| * network queue. |
| * |
| * Returns 0 for a successful open, or appropriate error code |
| */ |
| static int emac_dev_open(struct net_device *ndev) |
| { |
| struct device *emac_dev = &ndev->dev; |
| u32 cnt; |
| struct resource *res; |
| int q, m, ret; |
| int res_num = 0, irq_num = 0; |
| int i = 0; |
| struct emac_priv *priv = netdev_priv(ndev); |
| struct phy_device *phydev = NULL; |
| struct device *phy = NULL; |
| |
| ret = pm_runtime_get_sync(&priv->pdev->dev); |
| if (ret < 0) { |
| pm_runtime_put_noidle(&priv->pdev->dev); |
| dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| netif_carrier_off(ndev); |
| for (cnt = 0; cnt < ETH_ALEN; cnt++) |
| ndev->dev_addr[cnt] = priv->mac_addr[cnt]; |
| |
| /* Configuration items */ |
| priv->rx_buf_size = EMAC_DEF_MAX_FRAME_SIZE + NET_IP_ALIGN; |
| |
| priv->mac_hash1 = 0; |
| priv->mac_hash2 = 0; |
| emac_write(EMAC_MACHASH1, 0); |
| emac_write(EMAC_MACHASH2, 0); |
| |
| for (i = 0; i < EMAC_DEF_RX_NUM_DESC; i++) { |
| struct sk_buff *skb = emac_rx_alloc(priv); |
| |
| if (!skb) |
| break; |
| |
| ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, |
| skb_tailroom(skb), 0); |
| if (WARN_ON(ret < 0)) |
| break; |
| } |
| |
| /* Request IRQ */ |
| while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, |
| res_num))) { |
| for (irq_num = res->start; irq_num <= res->end; irq_num++) { |
| if (request_irq(irq_num, emac_irq, 0, ndev->name, |
| ndev)) { |
| dev_err(emac_dev, |
| "DaVinci EMAC: request_irq() failed\n"); |
| ret = -EBUSY; |
| |
| goto rollback; |
| } |
| } |
| res_num++; |
| } |
| /* prepare counters for rollback in case of an error */ |
| res_num--; |
| irq_num--; |
| |
| /* Start/Enable EMAC hardware */ |
| emac_hw_enable(priv); |
| |
| /* Enable Interrupt pacing if configured */ |
| if (priv->coal_intvl != 0) { |
| struct ethtool_coalesce coal; |
| |
| coal.rx_coalesce_usecs = (priv->coal_intvl << 4); |
| emac_set_coalesce(ndev, &coal); |
| } |
| |
| cpdma_ctlr_start(priv->dma); |
| |
| if (priv->phy_node) { |
| phydev = of_phy_connect(ndev, priv->phy_node, |
| &emac_adjust_link, 0, 0); |
| if (!phydev) { |
| dev_err(emac_dev, "could not connect to phy %pOF\n", |
| priv->phy_node); |
| ret = -ENODEV; |
| goto err; |
| } |
| } |
| |
| /* use the first phy on the bus if pdata did not give us a phy id */ |
| if (!phydev && !priv->phy_id) { |
| phy = bus_find_device_by_name(&mdio_bus_type, NULL, |
| "davinci_mdio"); |
| if (phy) { |
| priv->phy_id = dev_name(phy); |
| if (!priv->phy_id || !*priv->phy_id) |
| put_device(phy); |
| } |
| } |
| |
| if (!phydev && priv->phy_id && *priv->phy_id) { |
| phydev = phy_connect(ndev, priv->phy_id, |
| &emac_adjust_link, |
| PHY_INTERFACE_MODE_MII); |
| put_device(phy); /* reference taken by bus_find_device */ |
| if (IS_ERR(phydev)) { |
| dev_err(emac_dev, "could not connect to phy %s\n", |
| priv->phy_id); |
| ret = PTR_ERR(phydev); |
| goto err; |
| } |
| |
| priv->link = 0; |
| priv->speed = 0; |
| priv->duplex = ~0; |
| |
| phy_attached_info(phydev); |
| } |
| |
| if (!phydev) { |
| /* No PHY , fix the link, speed and duplex settings */ |
| dev_notice(emac_dev, "no phy, defaulting to 100/full\n"); |
| priv->link = 1; |
| priv->speed = SPEED_100; |
| priv->duplex = DUPLEX_FULL; |
| emac_update_phystatus(priv); |
| } |
| |
| if (netif_msg_drv(priv)) |
| dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name); |
| |
| if (phydev) |
| phy_start(phydev); |
| |
| return 0; |
| |
| err: |
| emac_int_disable(priv); |
| napi_disable(&priv->napi); |
| |
| rollback: |
| for (q = res_num; q >= 0; q--) { |
| res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, q); |
| /* at the first iteration, irq_num is already set to the |
| * right value |
| */ |
| if (q != res_num) |
| irq_num = res->end; |
| |
| for (m = irq_num; m >= res->start; m--) |
| free_irq(m, ndev); |
| } |
| cpdma_ctlr_stop(priv->dma); |
| pm_runtime_put(&priv->pdev->dev); |
| return ret; |
| } |
| |
| /** |
| * emac_dev_stop - EMAC device stop |
| * @ndev: The DaVinci EMAC network adapter |
| * |
| * Called when system wants to stop or down the interface. We stop the network |
| * queue, disable interrupts and cleanup TX/RX channels. |
| * |
| * We return the statistics in net_device_stats structure pulled from emac |
| */ |
| static int emac_dev_stop(struct net_device *ndev) |
| { |
| struct resource *res; |
| int i = 0; |
| int irq_num; |
| struct emac_priv *priv = netdev_priv(ndev); |
| struct device *emac_dev = &ndev->dev; |
| |
| /* inform the upper layers. */ |
| netif_stop_queue(ndev); |
| napi_disable(&priv->napi); |
| |
| netif_carrier_off(ndev); |
| emac_int_disable(priv); |
| cpdma_ctlr_stop(priv->dma); |
| emac_write(EMAC_SOFTRESET, 1); |
| |
| if (ndev->phydev) |
| phy_disconnect(ndev->phydev); |
| |
| /* Free IRQ */ |
| while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) { |
| for (irq_num = res->start; irq_num <= res->end; irq_num++) |
| free_irq(irq_num, priv->ndev); |
| i++; |
| } |
| |
| if (netif_msg_drv(priv)) |
| dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name); |
| |
| pm_runtime_put(&priv->pdev->dev); |
| return 0; |
| } |
| |
| /** |
| * emac_dev_getnetstats - EMAC get statistics function |
| * @ndev: The DaVinci EMAC network adapter |
| * |
| * Called when system wants to get statistics from the device. |
| * |
| * We return the statistics in net_device_stats structure pulled from emac |
| */ |
| static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev) |
| { |
| struct emac_priv *priv = netdev_priv(ndev); |
| u32 mac_control; |
| u32 stats_clear_mask; |
| int err; |
| |
| err = pm_runtime_get_sync(&priv->pdev->dev); |
| if (err < 0) { |
| pm_runtime_put_noidle(&priv->pdev->dev); |
| dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n", |
| __func__, err); |
| return &ndev->stats; |
| } |
| |
| /* update emac hardware stats and reset the registers*/ |
| |
| mac_control = emac_read(EMAC_MACCONTROL); |
| |
| if (mac_control & EMAC_MACCONTROL_GMIIEN) |
| stats_clear_mask = EMAC_STATS_CLR_MASK; |
| else |
| stats_clear_mask = 0; |
| |
| ndev->stats.multicast += emac_read(EMAC_RXMCASTFRAMES); |
| emac_write(EMAC_RXMCASTFRAMES, stats_clear_mask); |
| |
| ndev->stats.collisions += (emac_read(EMAC_TXCOLLISION) + |
| emac_read(EMAC_TXSINGLECOLL) + |
| emac_read(EMAC_TXMULTICOLL)); |
| emac_write(EMAC_TXCOLLISION, stats_clear_mask); |
| emac_write(EMAC_TXSINGLECOLL, stats_clear_mask); |
| emac_write(EMAC_TXMULTICOLL, stats_clear_mask); |
| |
| ndev->stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) + |
| emac_read(EMAC_RXJABBER) + |
| emac_read(EMAC_RXUNDERSIZED)); |
| emac_write(EMAC_RXOVERSIZED, stats_clear_mask); |
| emac_write(EMAC_RXJABBER, stats_clear_mask); |
| emac_write(EMAC_RXUNDERSIZED, stats_clear_mask); |
| |
| ndev->stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) + |
| emac_read(EMAC_RXMOFOVERRUNS)); |
| emac_write(EMAC_RXSOFOVERRUNS, stats_clear_mask); |
| emac_write(EMAC_RXMOFOVERRUNS, stats_clear_mask); |
| |
| ndev->stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS); |
| emac_write(EMAC_RXDMAOVERRUNS, stats_clear_mask); |
| |
| ndev->stats.tx_carrier_errors += |
| emac_read(EMAC_TXCARRIERSENSE); |
| emac_write(EMAC_TXCARRIERSENSE, stats_clear_mask); |
| |
| ndev->stats.tx_fifo_errors += emac_read(EMAC_TXUNDERRUN); |
| emac_write(EMAC_TXUNDERRUN, stats_clear_mask); |
| |
| pm_runtime_put(&priv->pdev->dev); |
| |
| return &ndev->stats; |
| } |
| |
| static const struct net_device_ops emac_netdev_ops = { |
| .ndo_open = emac_dev_open, |
| .ndo_stop = emac_dev_stop, |
| .ndo_start_xmit = emac_dev_xmit, |
| .ndo_set_rx_mode = emac_dev_mcast_set, |
| .ndo_set_mac_address = emac_dev_setmac_addr, |
| .ndo_do_ioctl = emac_devioctl, |
| .ndo_tx_timeout = emac_dev_tx_timeout, |
| .ndo_get_stats = emac_dev_getnetstats, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = emac_poll_controller, |
| #endif |
| }; |
| |
| static const struct of_device_id davinci_emac_of_match[]; |
| |
| static struct emac_platform_data * |
| davinci_emac_of_get_pdata(struct platform_device *pdev, struct emac_priv *priv) |
| { |
| struct device_node *np; |
| const struct of_device_id *match; |
| const struct emac_platform_data *auxdata; |
| struct emac_platform_data *pdata = NULL; |
| const u8 *mac_addr; |
| |
| if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) |
| return dev_get_platdata(&pdev->dev); |
| |
| pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return NULL; |
| |
| np = pdev->dev.of_node; |
| pdata->version = EMAC_VERSION_2; |
| |
| if (!is_valid_ether_addr(pdata->mac_addr)) { |
| mac_addr = of_get_mac_address(np); |
| if (mac_addr) |
| ether_addr_copy(pdata->mac_addr, mac_addr); |
| } |
| |
| of_property_read_u32(np, "ti,davinci-ctrl-reg-offset", |
| &pdata->ctrl_reg_offset); |
| |
| of_property_read_u32(np, "ti,davinci-ctrl-mod-reg-offset", |
| &pdata->ctrl_mod_reg_offset); |
| |
| of_property_read_u32(np, "ti,davinci-ctrl-ram-offset", |
| &pdata->ctrl_ram_offset); |
| |
| of_property_read_u32(np, "ti,davinci-ctrl-ram-size", |
| &pdata->ctrl_ram_size); |
| |
| of_property_read_u8(np, "ti,davinci-rmii-en", &pdata->rmii_en); |
| |
| pdata->no_bd_ram = of_property_read_bool(np, "ti,davinci-no-bd-ram"); |
| |
| priv->phy_node = of_parse_phandle(np, "phy-handle", 0); |
| if (!priv->phy_node) { |
| if (!of_phy_is_fixed_link(np)) |
| pdata->phy_id = NULL; |
| else if (of_phy_register_fixed_link(np) >= 0) |
| priv->phy_node = of_node_get(np); |
| } |
| |
| auxdata = pdev->dev.platform_data; |
| if (auxdata) { |
| pdata->interrupt_enable = auxdata->interrupt_enable; |
| pdata->interrupt_disable = auxdata->interrupt_disable; |
| } |
| |
| match = of_match_device(davinci_emac_of_match, &pdev->dev); |
| if (match && match->data) { |
| auxdata = match->data; |
| pdata->version = auxdata->version; |
| pdata->hw_ram_addr = auxdata->hw_ram_addr; |
| } |
| |
| return pdata; |
| } |
| |
| static int davinci_emac_try_get_mac(struct platform_device *pdev, |
| int instance, u8 *mac_addr) |
| { |
| if (!pdev->dev.of_node) |
| return -EINVAL; |
| |
| return ti_cm_get_macid(&pdev->dev, instance, mac_addr); |
| } |
| |
| /** |
| * davinci_emac_probe - EMAC device probe |
| * @pdev: The DaVinci EMAC device that we are removing |
| * |
| * Called when probing for emac devicesr. We get details of instances and |
| * resource information from platform init and register a network device |
| * and allocate resources necessary for driver to perform |
| */ |
| static int davinci_emac_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| int rc = 0; |
| struct resource *res, *res_ctrl; |
| struct net_device *ndev; |
| struct emac_priv *priv; |
| unsigned long hw_ram_addr; |
| struct emac_platform_data *pdata; |
| struct cpdma_params dma_params; |
| struct clk *emac_clk; |
| unsigned long emac_bus_frequency; |
| |
| |
| /* obtain emac clock from kernel */ |
| emac_clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(emac_clk)) { |
| dev_err(&pdev->dev, "failed to get EMAC clock\n"); |
| return -EBUSY; |
| } |
| emac_bus_frequency = clk_get_rate(emac_clk); |
| devm_clk_put(&pdev->dev, emac_clk); |
| |
| /* TODO: Probe PHY here if possible */ |
| |
| ndev = alloc_etherdev(sizeof(struct emac_priv)); |
| if (!ndev) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, ndev); |
| priv = netdev_priv(ndev); |
| priv->pdev = pdev; |
| priv->ndev = ndev; |
| priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG); |
| |
| spin_lock_init(&priv->lock); |
| |
| pdata = davinci_emac_of_get_pdata(pdev, priv); |
| if (!pdata) { |
| dev_err(&pdev->dev, "no platform data\n"); |
| rc = -ENODEV; |
| goto err_free_netdev; |
| } |
| |
| /* MAC addr and PHY mask , RMII enable info from platform_data */ |
| memcpy(priv->mac_addr, pdata->mac_addr, ETH_ALEN); |
| priv->phy_id = pdata->phy_id; |
| priv->rmii_en = pdata->rmii_en; |
| priv->version = pdata->version; |
| priv->int_enable = pdata->interrupt_enable; |
| priv->int_disable = pdata->interrupt_disable; |
| |
| priv->coal_intvl = 0; |
| priv->bus_freq_mhz = (u32)(emac_bus_frequency / 1000000); |
| |
| /* Get EMAC platform data */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| priv->emac_base_phys = res->start + pdata->ctrl_reg_offset; |
| priv->remap_addr = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(priv->remap_addr)) { |
| rc = PTR_ERR(priv->remap_addr); |
| goto no_pdata; |
| } |
| |
| res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (res_ctrl) { |
| priv->ctrl_base = |
| devm_ioremap_resource(&pdev->dev, res_ctrl); |
| if (IS_ERR(priv->ctrl_base)) { |
| rc = PTR_ERR(priv->ctrl_base); |
| goto no_pdata; |
| } |
| } else { |
| priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset; |
| } |
| |
| priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset; |
| ndev->base_addr = (unsigned long)priv->remap_addr; |
| |
| hw_ram_addr = pdata->hw_ram_addr; |
| if (!hw_ram_addr) |
| hw_ram_addr = (u32 __force)res->start + pdata->ctrl_ram_offset; |
| |
| memset(&dma_params, 0, sizeof(dma_params)); |
| dma_params.dev = &pdev->dev; |
| dma_params.dmaregs = priv->emac_base; |
| dma_params.rxthresh = priv->emac_base + 0x120; |
| dma_params.rxfree = priv->emac_base + 0x140; |
| dma_params.txhdp = priv->emac_base + 0x600; |
| dma_params.rxhdp = priv->emac_base + 0x620; |
| dma_params.txcp = priv->emac_base + 0x640; |
| dma_params.rxcp = priv->emac_base + 0x660; |
| dma_params.num_chan = EMAC_MAX_TXRX_CHANNELS; |
| dma_params.min_packet_size = EMAC_DEF_MIN_ETHPKTSIZE; |
| dma_params.desc_hw_addr = hw_ram_addr; |
| dma_params.desc_mem_size = pdata->ctrl_ram_size; |
| dma_params.desc_align = 16; |
| |
| dma_params.desc_mem_phys = pdata->no_bd_ram ? 0 : |
| (u32 __force)res->start + pdata->ctrl_ram_offset; |
| |
| priv->dma = cpdma_ctlr_create(&dma_params); |
| if (!priv->dma) { |
| dev_err(&pdev->dev, "error initializing DMA\n"); |
| rc = -ENOMEM; |
| goto no_pdata; |
| } |
| |
| priv->txchan = cpdma_chan_create(priv->dma, EMAC_DEF_TX_CH, |
| emac_tx_handler, 0); |
| if (IS_ERR(priv->txchan)) { |
| dev_err(&pdev->dev, "error initializing tx dma channel\n"); |
| rc = PTR_ERR(priv->txchan); |
| goto no_cpdma_chan; |
| } |
| |
| priv->rxchan = cpdma_chan_create(priv->dma, EMAC_DEF_RX_CH, |
| emac_rx_handler, 1); |
| if (IS_ERR(priv->rxchan)) { |
| dev_err(&pdev->dev, "error initializing rx dma channel\n"); |
| rc = PTR_ERR(priv->rxchan); |
| goto no_cpdma_chan; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "error getting irq res\n"); |
| rc = -ENOENT; |
| goto no_cpdma_chan; |
| } |
| ndev->irq = res->start; |
| |
| rc = davinci_emac_try_get_mac(pdev, res_ctrl ? 0 : 1, priv->mac_addr); |
| if (!rc) |
| ether_addr_copy(ndev->dev_addr, priv->mac_addr); |
| |
| if (!is_valid_ether_addr(priv->mac_addr)) { |
| /* Use random MAC if none passed */ |
| eth_hw_addr_random(ndev); |
| memcpy(priv->mac_addr, ndev->dev_addr, ndev->addr_len); |
| dev_warn(&pdev->dev, "using random MAC addr: %pM\n", |
| priv->mac_addr); |
| } |
| |
| ndev->netdev_ops = &emac_netdev_ops; |
| ndev->ethtool_ops = ðtool_ops; |
| netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT); |
| |
| pm_runtime_enable(&pdev->dev); |
| rc = pm_runtime_get_sync(&pdev->dev); |
| if (rc < 0) { |
| pm_runtime_put_noidle(&pdev->dev); |
| dev_err(&pdev->dev, "%s: failed to get_sync(%d)\n", |
| __func__, rc); |
| goto no_cpdma_chan; |
| } |
| |
| /* register the network device */ |
| SET_NETDEV_DEV(ndev, &pdev->dev); |
| rc = register_netdev(ndev); |
| if (rc) { |
| dev_err(&pdev->dev, "error in register_netdev\n"); |
| rc = -ENODEV; |
| pm_runtime_put(&pdev->dev); |
| goto no_cpdma_chan; |
| } |
| |
| |
| if (netif_msg_probe(priv)) { |
| dev_notice(&pdev->dev, "DaVinci EMAC Probe found device " |
| "(regs: %p, irq: %d)\n", |
| (void *)priv->emac_base_phys, ndev->irq); |
| } |
| pm_runtime_put(&pdev->dev); |
| |
| return 0; |
| |
| no_cpdma_chan: |
| if (priv->txchan) |
| cpdma_chan_destroy(priv->txchan); |
| if (priv->rxchan) |
| cpdma_chan_destroy(priv->rxchan); |
| cpdma_ctlr_destroy(priv->dma); |
| no_pdata: |
| if (of_phy_is_fixed_link(np)) |
| of_phy_deregister_fixed_link(np); |
| of_node_put(priv->phy_node); |
| err_free_netdev: |
| free_netdev(ndev); |
| return rc; |
| } |
| |
| /** |
| * davinci_emac_remove - EMAC device remove |
| * @pdev: The DaVinci EMAC device that we are removing |
| * |
| * Called when removing the device driver. We disable clock usage and release |
| * the resources taken up by the driver and unregister network device |
| */ |
| static int davinci_emac_remove(struct platform_device *pdev) |
| { |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| struct emac_priv *priv = netdev_priv(ndev); |
| struct device_node *np = pdev->dev.of_node; |
| |
| dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n"); |
| |
| if (priv->txchan) |
| cpdma_chan_destroy(priv->txchan); |
| if (priv->rxchan) |
| cpdma_chan_destroy(priv->rxchan); |
| cpdma_ctlr_destroy(priv->dma); |
| |
| unregister_netdev(ndev); |
| of_node_put(priv->phy_node); |
| pm_runtime_disable(&pdev->dev); |
| if (of_phy_is_fixed_link(np)) |
| of_phy_deregister_fixed_link(np); |
| free_netdev(ndev); |
| |
| return 0; |
| } |
| |
| static int davinci_emac_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| |
| if (netif_running(ndev)) |
| emac_dev_stop(ndev); |
| |
| return 0; |
| } |
| |
| static int davinci_emac_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| |
| if (netif_running(ndev)) |
| emac_dev_open(ndev); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops davinci_emac_pm_ops = { |
| .suspend = davinci_emac_suspend, |
| .resume = davinci_emac_resume, |
| }; |
| |
| #if IS_ENABLED(CONFIG_OF) |
| static const struct emac_platform_data am3517_emac_data = { |
| .version = EMAC_VERSION_2, |
| .hw_ram_addr = 0x01e20000, |
| }; |
| |
| static const struct emac_platform_data dm816_emac_data = { |
| .version = EMAC_VERSION_2, |
| }; |
| |
| static const struct of_device_id davinci_emac_of_match[] = { |
| {.compatible = "ti,davinci-dm6467-emac", }, |
| {.compatible = "ti,am3517-emac", .data = &am3517_emac_data, }, |
| {.compatible = "ti,dm816-emac", .data = &dm816_emac_data, }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, davinci_emac_of_match); |
| #endif |
| |
| /* davinci_emac_driver: EMAC platform driver structure */ |
| static struct platform_driver davinci_emac_driver = { |
| .driver = { |
| .name = "davinci_emac", |
| .pm = &davinci_emac_pm_ops, |
| .of_match_table = of_match_ptr(davinci_emac_of_match), |
| }, |
| .probe = davinci_emac_probe, |
| .remove = davinci_emac_remove, |
| }; |
| |
| /** |
| * davinci_emac_init - EMAC driver module init |
| * |
| * Called when initializing the driver. We register the driver with |
| * the platform. |
| */ |
| static int __init davinci_emac_init(void) |
| { |
| return platform_driver_register(&davinci_emac_driver); |
| } |
| late_initcall(davinci_emac_init); |
| |
| /** |
| * davinci_emac_exit - EMAC driver module exit |
| * |
| * Called when exiting the driver completely. We unregister the driver with |
| * the platform and exit |
| */ |
| static void __exit davinci_emac_exit(void) |
| { |
| platform_driver_unregister(&davinci_emac_driver); |
| } |
| module_exit(davinci_emac_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("DaVinci EMAC Maintainer: Anant Gole <anantgole@ti.com>"); |
| MODULE_AUTHOR("DaVinci EMAC Maintainer: Chaithrika U S <chaithrika@ti.com>"); |
| MODULE_DESCRIPTION("DaVinci EMAC Ethernet driver"); |