| /* |
| * Copyright (c) 2013 Broadcom Corporation |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/device.h> |
| #include <linux/firmware.h> |
| #include <linux/module.h> |
| #include <linux/bcm47xx_nvram.h> |
| |
| #include "debug.h" |
| #include "firmware.h" |
| #include "core.h" |
| #include "common.h" |
| #include "chip.h" |
| |
| #define BRCMF_FW_MAX_NVRAM_SIZE 64000 |
| #define BRCMF_FW_NVRAM_DEVPATH_LEN 19 /* devpath0=pcie/1/4/ */ |
| #define BRCMF_FW_NVRAM_PCIEDEV_LEN 10 /* pcie/1/4/ + \0 */ |
| #define BRCMF_FW_DEFAULT_BOARDREV "boardrev=0xff" |
| |
| enum nvram_parser_state { |
| IDLE, |
| KEY, |
| VALUE, |
| COMMENT, |
| END |
| }; |
| |
| /** |
| * struct nvram_parser - internal info for parser. |
| * |
| * @state: current parser state. |
| * @data: input buffer being parsed. |
| * @nvram: output buffer with parse result. |
| * @nvram_len: lenght of parse result. |
| * @line: current line. |
| * @column: current column in line. |
| * @pos: byte offset in input buffer. |
| * @entry: start position of key,value entry. |
| * @multi_dev_v1: detect pcie multi device v1 (compressed). |
| * @multi_dev_v2: detect pcie multi device v2. |
| * @boardrev_found: nvram contains boardrev information. |
| */ |
| struct nvram_parser { |
| enum nvram_parser_state state; |
| const u8 *data; |
| u8 *nvram; |
| u32 nvram_len; |
| u32 line; |
| u32 column; |
| u32 pos; |
| u32 entry; |
| bool multi_dev_v1; |
| bool multi_dev_v2; |
| bool boardrev_found; |
| }; |
| |
| /** |
| * is_nvram_char() - check if char is a valid one for NVRAM entry |
| * |
| * It accepts all printable ASCII chars except for '#' which opens a comment. |
| * Please note that ' ' (space) while accepted is not a valid key name char. |
| */ |
| static bool is_nvram_char(char c) |
| { |
| /* comment marker excluded */ |
| if (c == '#') |
| return false; |
| |
| /* key and value may have any other readable character */ |
| return (c >= 0x20 && c < 0x7f); |
| } |
| |
| static bool is_whitespace(char c) |
| { |
| return (c == ' ' || c == '\r' || c == '\n' || c == '\t'); |
| } |
| |
| static enum nvram_parser_state brcmf_nvram_handle_idle(struct nvram_parser *nvp) |
| { |
| char c; |
| |
| c = nvp->data[nvp->pos]; |
| if (c == '\n') |
| return COMMENT; |
| if (is_whitespace(c) || c == '\0') |
| goto proceed; |
| if (c == '#') |
| return COMMENT; |
| if (is_nvram_char(c)) { |
| nvp->entry = nvp->pos; |
| return KEY; |
| } |
| brcmf_dbg(INFO, "warning: ln=%d:col=%d: ignoring invalid character\n", |
| nvp->line, nvp->column); |
| proceed: |
| nvp->column++; |
| nvp->pos++; |
| return IDLE; |
| } |
| |
| static enum nvram_parser_state brcmf_nvram_handle_key(struct nvram_parser *nvp) |
| { |
| enum nvram_parser_state st = nvp->state; |
| char c; |
| |
| c = nvp->data[nvp->pos]; |
| if (c == '=') { |
| /* ignore RAW1 by treating as comment */ |
| if (strncmp(&nvp->data[nvp->entry], "RAW1", 4) == 0) |
| st = COMMENT; |
| else |
| st = VALUE; |
| if (strncmp(&nvp->data[nvp->entry], "devpath", 7) == 0) |
| nvp->multi_dev_v1 = true; |
| if (strncmp(&nvp->data[nvp->entry], "pcie/", 5) == 0) |
| nvp->multi_dev_v2 = true; |
| if (strncmp(&nvp->data[nvp->entry], "boardrev", 8) == 0) |
| nvp->boardrev_found = true; |
| } else if (!is_nvram_char(c) || c == ' ') { |
| brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n", |
| nvp->line, nvp->column); |
| return COMMENT; |
| } |
| |
| nvp->column++; |
| nvp->pos++; |
| return st; |
| } |
| |
| static enum nvram_parser_state |
| brcmf_nvram_handle_value(struct nvram_parser *nvp) |
| { |
| char c; |
| char *skv; |
| char *ekv; |
| u32 cplen; |
| |
| c = nvp->data[nvp->pos]; |
| if (!is_nvram_char(c)) { |
| /* key,value pair complete */ |
| ekv = (u8 *)&nvp->data[nvp->pos]; |
| skv = (u8 *)&nvp->data[nvp->entry]; |
| cplen = ekv - skv; |
| if (nvp->nvram_len + cplen + 1 >= BRCMF_FW_MAX_NVRAM_SIZE) |
| return END; |
| /* copy to output buffer */ |
| memcpy(&nvp->nvram[nvp->nvram_len], skv, cplen); |
| nvp->nvram_len += cplen; |
| nvp->nvram[nvp->nvram_len] = '\0'; |
| nvp->nvram_len++; |
| return IDLE; |
| } |
| nvp->pos++; |
| nvp->column++; |
| return VALUE; |
| } |
| |
| static enum nvram_parser_state |
| brcmf_nvram_handle_comment(struct nvram_parser *nvp) |
| { |
| char *eoc, *sol; |
| |
| sol = (char *)&nvp->data[nvp->pos]; |
| eoc = strchr(sol, '\n'); |
| if (!eoc) { |
| eoc = strchr(sol, '\0'); |
| if (!eoc) |
| return END; |
| } |
| |
| /* eat all moving to next line */ |
| nvp->line++; |
| nvp->column = 1; |
| nvp->pos += (eoc - sol) + 1; |
| return IDLE; |
| } |
| |
| static enum nvram_parser_state brcmf_nvram_handle_end(struct nvram_parser *nvp) |
| { |
| /* final state */ |
| return END; |
| } |
| |
| static enum nvram_parser_state |
| (*nv_parser_states[])(struct nvram_parser *nvp) = { |
| brcmf_nvram_handle_idle, |
| brcmf_nvram_handle_key, |
| brcmf_nvram_handle_value, |
| brcmf_nvram_handle_comment, |
| brcmf_nvram_handle_end |
| }; |
| |
| static int brcmf_init_nvram_parser(struct nvram_parser *nvp, |
| const u8 *data, size_t data_len) |
| { |
| size_t size; |
| |
| memset(nvp, 0, sizeof(*nvp)); |
| nvp->data = data; |
| /* Limit size to MAX_NVRAM_SIZE, some files contain lot of comment */ |
| if (data_len > BRCMF_FW_MAX_NVRAM_SIZE) |
| size = BRCMF_FW_MAX_NVRAM_SIZE; |
| else |
| size = data_len; |
| /* Alloc for extra 0 byte + roundup by 4 + length field */ |
| size += 1 + 3 + sizeof(u32); |
| nvp->nvram = kzalloc(size, GFP_KERNEL); |
| if (!nvp->nvram) |
| return -ENOMEM; |
| |
| nvp->line = 1; |
| nvp->column = 1; |
| return 0; |
| } |
| |
| /* brcmf_fw_strip_multi_v1 :Some nvram files contain settings for multiple |
| * devices. Strip it down for one device, use domain_nr/bus_nr to determine |
| * which data is to be returned. v1 is the version where nvram is stored |
| * compressed and "devpath" maps to index for valid entries. |
| */ |
| static void brcmf_fw_strip_multi_v1(struct nvram_parser *nvp, u16 domain_nr, |
| u16 bus_nr) |
| { |
| /* Device path with a leading '=' key-value separator */ |
| char pci_path[] = "=pci/?/?"; |
| size_t pci_len; |
| char pcie_path[] = "=pcie/?/?"; |
| size_t pcie_len; |
| |
| u32 i, j; |
| bool found; |
| u8 *nvram; |
| u8 id; |
| |
| nvram = kzalloc(nvp->nvram_len + 1 + 3 + sizeof(u32), GFP_KERNEL); |
| if (!nvram) |
| goto fail; |
| |
| /* min length: devpath0=pcie/1/4/ + 0:x=y */ |
| if (nvp->nvram_len < BRCMF_FW_NVRAM_DEVPATH_LEN + 6) |
| goto fail; |
| |
| /* First search for the devpathX and see if it is the configuration |
| * for domain_nr/bus_nr. Search complete nvp |
| */ |
| snprintf(pci_path, sizeof(pci_path), "=pci/%d/%d", domain_nr, |
| bus_nr); |
| pci_len = strlen(pci_path); |
| snprintf(pcie_path, sizeof(pcie_path), "=pcie/%d/%d", domain_nr, |
| bus_nr); |
| pcie_len = strlen(pcie_path); |
| found = false; |
| i = 0; |
| while (i < nvp->nvram_len - BRCMF_FW_NVRAM_DEVPATH_LEN) { |
| /* Format: devpathX=pcie/Y/Z/ |
| * Y = domain_nr, Z = bus_nr, X = virtual ID |
| */ |
| if (strncmp(&nvp->nvram[i], "devpath", 7) == 0 && |
| (!strncmp(&nvp->nvram[i + 8], pci_path, pci_len) || |
| !strncmp(&nvp->nvram[i + 8], pcie_path, pcie_len))) { |
| id = nvp->nvram[i + 7] - '0'; |
| found = true; |
| break; |
| } |
| while (nvp->nvram[i] != 0) |
| i++; |
| i++; |
| } |
| if (!found) |
| goto fail; |
| |
| /* Now copy all valid entries, release old nvram and assign new one */ |
| i = 0; |
| j = 0; |
| while (i < nvp->nvram_len) { |
| if ((nvp->nvram[i] - '0' == id) && (nvp->nvram[i + 1] == ':')) { |
| i += 2; |
| if (strncmp(&nvp->nvram[i], "boardrev", 8) == 0) |
| nvp->boardrev_found = true; |
| while (nvp->nvram[i] != 0) { |
| nvram[j] = nvp->nvram[i]; |
| i++; |
| j++; |
| } |
| nvram[j] = 0; |
| j++; |
| } |
| while (nvp->nvram[i] != 0) |
| i++; |
| i++; |
| } |
| kfree(nvp->nvram); |
| nvp->nvram = nvram; |
| nvp->nvram_len = j; |
| return; |
| |
| fail: |
| kfree(nvram); |
| nvp->nvram_len = 0; |
| } |
| |
| /* brcmf_fw_strip_multi_v2 :Some nvram files contain settings for multiple |
| * devices. Strip it down for one device, use domain_nr/bus_nr to determine |
| * which data is to be returned. v2 is the version where nvram is stored |
| * uncompressed, all relevant valid entries are identified by |
| * pcie/domain_nr/bus_nr: |
| */ |
| static void brcmf_fw_strip_multi_v2(struct nvram_parser *nvp, u16 domain_nr, |
| u16 bus_nr) |
| { |
| char prefix[BRCMF_FW_NVRAM_PCIEDEV_LEN]; |
| size_t len; |
| u32 i, j; |
| u8 *nvram; |
| |
| nvram = kzalloc(nvp->nvram_len + 1 + 3 + sizeof(u32), GFP_KERNEL); |
| if (!nvram) |
| goto fail; |
| |
| /* Copy all valid entries, release old nvram and assign new one. |
| * Valid entries are of type pcie/X/Y/ where X = domain_nr and |
| * Y = bus_nr. |
| */ |
| snprintf(prefix, sizeof(prefix), "pcie/%d/%d/", domain_nr, bus_nr); |
| len = strlen(prefix); |
| i = 0; |
| j = 0; |
| while (i < nvp->nvram_len - len) { |
| if (strncmp(&nvp->nvram[i], prefix, len) == 0) { |
| i += len; |
| if (strncmp(&nvp->nvram[i], "boardrev", 8) == 0) |
| nvp->boardrev_found = true; |
| while (nvp->nvram[i] != 0) { |
| nvram[j] = nvp->nvram[i]; |
| i++; |
| j++; |
| } |
| nvram[j] = 0; |
| j++; |
| } |
| while (nvp->nvram[i] != 0) |
| i++; |
| i++; |
| } |
| kfree(nvp->nvram); |
| nvp->nvram = nvram; |
| nvp->nvram_len = j; |
| return; |
| fail: |
| kfree(nvram); |
| nvp->nvram_len = 0; |
| } |
| |
| static void brcmf_fw_add_defaults(struct nvram_parser *nvp) |
| { |
| if (nvp->boardrev_found) |
| return; |
| |
| memcpy(&nvp->nvram[nvp->nvram_len], &BRCMF_FW_DEFAULT_BOARDREV, |
| strlen(BRCMF_FW_DEFAULT_BOARDREV)); |
| nvp->nvram_len += strlen(BRCMF_FW_DEFAULT_BOARDREV); |
| nvp->nvram[nvp->nvram_len] = '\0'; |
| nvp->nvram_len++; |
| } |
| |
| /* brcmf_nvram_strip :Takes a buffer of "<var>=<value>\n" lines read from a fil |
| * and ending in a NUL. Removes carriage returns, empty lines, comment lines, |
| * and converts newlines to NULs. Shortens buffer as needed and pads with NULs. |
| * End of buffer is completed with token identifying length of buffer. |
| */ |
| static void *brcmf_fw_nvram_strip(const u8 *data, size_t data_len, |
| u32 *new_length, u16 domain_nr, u16 bus_nr) |
| { |
| struct nvram_parser nvp; |
| u32 pad; |
| u32 token; |
| __le32 token_le; |
| |
| if (brcmf_init_nvram_parser(&nvp, data, data_len) < 0) |
| return NULL; |
| |
| while (nvp.pos < data_len) { |
| nvp.state = nv_parser_states[nvp.state](&nvp); |
| if (nvp.state == END) |
| break; |
| } |
| if (nvp.multi_dev_v1) { |
| nvp.boardrev_found = false; |
| brcmf_fw_strip_multi_v1(&nvp, domain_nr, bus_nr); |
| } else if (nvp.multi_dev_v2) { |
| nvp.boardrev_found = false; |
| brcmf_fw_strip_multi_v2(&nvp, domain_nr, bus_nr); |
| } |
| |
| if (nvp.nvram_len == 0) { |
| kfree(nvp.nvram); |
| return NULL; |
| } |
| |
| brcmf_fw_add_defaults(&nvp); |
| |
| pad = nvp.nvram_len; |
| *new_length = roundup(nvp.nvram_len + 1, 4); |
| while (pad != *new_length) { |
| nvp.nvram[pad] = 0; |
| pad++; |
| } |
| |
| token = *new_length / 4; |
| token = (~token << 16) | (token & 0x0000FFFF); |
| token_le = cpu_to_le32(token); |
| |
| memcpy(&nvp.nvram[*new_length], &token_le, sizeof(token_le)); |
| *new_length += sizeof(token_le); |
| |
| return nvp.nvram; |
| } |
| |
| void brcmf_fw_nvram_free(void *nvram) |
| { |
| kfree(nvram); |
| } |
| |
| struct brcmf_fw { |
| struct device *dev; |
| struct brcmf_fw_request *req; |
| u32 curpos; |
| void (*done)(struct device *dev, int err, struct brcmf_fw_request *req); |
| }; |
| |
| static void brcmf_fw_request_done(const struct firmware *fw, void *ctx); |
| |
| static void brcmf_fw_free_request(struct brcmf_fw_request *req) |
| { |
| struct brcmf_fw_item *item; |
| int i; |
| |
| for (i = 0, item = &req->items[0]; i < req->n_items; i++, item++) { |
| if (item->type == BRCMF_FW_TYPE_BINARY) |
| release_firmware(item->binary); |
| else if (item->type == BRCMF_FW_TYPE_NVRAM) |
| brcmf_fw_nvram_free(item->nv_data.data); |
| } |
| kfree(req); |
| } |
| |
| static void brcmf_fw_request_nvram_done(const struct firmware *fw, void *ctx) |
| { |
| struct brcmf_fw *fwctx = ctx; |
| struct brcmf_fw_item *cur; |
| u32 nvram_length = 0; |
| void *nvram = NULL; |
| u8 *data = NULL; |
| size_t data_len; |
| bool raw_nvram; |
| |
| brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(fwctx->dev)); |
| |
| cur = &fwctx->req->items[fwctx->curpos]; |
| |
| if (fw && fw->data) { |
| data = (u8 *)fw->data; |
| data_len = fw->size; |
| raw_nvram = false; |
| } else { |
| data = bcm47xx_nvram_get_contents(&data_len); |
| if (!data && !(cur->flags & BRCMF_FW_REQF_OPTIONAL)) |
| goto fail; |
| raw_nvram = true; |
| } |
| |
| if (data) |
| nvram = brcmf_fw_nvram_strip(data, data_len, &nvram_length, |
| fwctx->req->domain_nr, |
| fwctx->req->bus_nr); |
| |
| if (raw_nvram) |
| bcm47xx_nvram_release_contents(data); |
| release_firmware(fw); |
| if (!nvram && !(cur->flags & BRCMF_FW_REQF_OPTIONAL)) |
| goto fail; |
| |
| brcmf_dbg(TRACE, "nvram %p len %d\n", nvram, nvram_length); |
| cur->nv_data.data = nvram; |
| cur->nv_data.len = nvram_length; |
| return; |
| |
| fail: |
| brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev)); |
| fwctx->done(fwctx->dev, -ENOENT, NULL); |
| brcmf_fw_free_request(fwctx->req); |
| kfree(fwctx); |
| } |
| |
| static int brcmf_fw_request_next_item(struct brcmf_fw *fwctx, bool async) |
| { |
| struct brcmf_fw_item *cur; |
| const struct firmware *fw = NULL; |
| int ret; |
| |
| cur = &fwctx->req->items[fwctx->curpos]; |
| |
| brcmf_dbg(TRACE, "%srequest for %s\n", async ? "async " : "", |
| cur->path); |
| |
| if (async) |
| ret = request_firmware_nowait(THIS_MODULE, true, cur->path, |
| fwctx->dev, GFP_KERNEL, fwctx, |
| brcmf_fw_request_done); |
| else |
| ret = request_firmware(&fw, cur->path, fwctx->dev); |
| |
| if (ret < 0) { |
| brcmf_fw_request_done(NULL, fwctx); |
| } else if (!async && fw) { |
| brcmf_dbg(TRACE, "firmware %s %sfound\n", cur->path, |
| fw ? "" : "not "); |
| if (cur->type == BRCMF_FW_TYPE_BINARY) |
| cur->binary = fw; |
| else if (cur->type == BRCMF_FW_TYPE_NVRAM) |
| brcmf_fw_request_nvram_done(fw, fwctx); |
| else |
| release_firmware(fw); |
| |
| return -EAGAIN; |
| } |
| return 0; |
| } |
| |
| static void brcmf_fw_request_done(const struct firmware *fw, void *ctx) |
| { |
| struct brcmf_fw *fwctx = ctx; |
| struct brcmf_fw_item *cur; |
| int ret = 0; |
| |
| cur = &fwctx->req->items[fwctx->curpos]; |
| |
| brcmf_dbg(TRACE, "enter: firmware %s %sfound\n", cur->path, |
| fw ? "" : "not "); |
| |
| if (fw) { |
| if (cur->type == BRCMF_FW_TYPE_BINARY) |
| cur->binary = fw; |
| else if (cur->type == BRCMF_FW_TYPE_NVRAM) |
| brcmf_fw_request_nvram_done(fw, fwctx); |
| else |
| release_firmware(fw); |
| } else if (cur->type == BRCMF_FW_TYPE_NVRAM) { |
| brcmf_fw_request_nvram_done(NULL, fwctx); |
| } else if (!(cur->flags & BRCMF_FW_REQF_OPTIONAL)) { |
| ret = -ENOENT; |
| goto fail; |
| } |
| |
| do { |
| if (++fwctx->curpos == fwctx->req->n_items) { |
| ret = 0; |
| goto done; |
| } |
| |
| ret = brcmf_fw_request_next_item(fwctx, false); |
| } while (ret == -EAGAIN); |
| |
| return; |
| |
| fail: |
| brcmf_dbg(TRACE, "failed err=%d: dev=%s, fw=%s\n", ret, |
| dev_name(fwctx->dev), cur->path); |
| brcmf_fw_free_request(fwctx->req); |
| fwctx->req = NULL; |
| done: |
| fwctx->done(fwctx->dev, ret, fwctx->req); |
| kfree(fwctx); |
| } |
| |
| static bool brcmf_fw_request_is_valid(struct brcmf_fw_request *req) |
| { |
| struct brcmf_fw_item *item; |
| int i; |
| |
| if (!req->n_items) |
| return false; |
| |
| for (i = 0, item = &req->items[0]; i < req->n_items; i++, item++) { |
| if (!item->path) |
| return false; |
| } |
| return true; |
| } |
| |
| int brcmf_fw_get_firmwares(struct device *dev, struct brcmf_fw_request *req, |
| void (*fw_cb)(struct device *dev, int err, |
| struct brcmf_fw_request *req)) |
| { |
| struct brcmf_fw *fwctx; |
| |
| brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(dev)); |
| if (!fw_cb) |
| return -EINVAL; |
| |
| if (!brcmf_fw_request_is_valid(req)) |
| return -EINVAL; |
| |
| fwctx = kzalloc(sizeof(*fwctx), GFP_KERNEL); |
| if (!fwctx) |
| return -ENOMEM; |
| |
| fwctx->dev = dev; |
| fwctx->req = req; |
| fwctx->done = fw_cb; |
| |
| brcmf_fw_request_next_item(fwctx, true); |
| return 0; |
| } |
| |
| struct brcmf_fw_request * |
| brcmf_fw_alloc_request(u32 chip, u32 chiprev, |
| struct brcmf_firmware_mapping mapping_table[], |
| u32 table_size, struct brcmf_fw_name *fwnames, |
| u32 n_fwnames) |
| { |
| struct brcmf_fw_request *fwreq; |
| char chipname[12]; |
| const char *mp_path; |
| u32 i, j; |
| char end; |
| size_t reqsz; |
| |
| for (i = 0; i < table_size; i++) { |
| if (mapping_table[i].chipid == chip && |
| mapping_table[i].revmask & BIT(chiprev)) |
| break; |
| } |
| |
| if (i == table_size) { |
| brcmf_err("Unknown chipid %d [%d]\n", chip, chiprev); |
| return NULL; |
| } |
| |
| reqsz = sizeof(*fwreq) + n_fwnames * sizeof(struct brcmf_fw_item); |
| fwreq = kzalloc(reqsz, GFP_KERNEL); |
| if (!fwreq) |
| return NULL; |
| |
| brcmf_chip_name(chip, chiprev, chipname, sizeof(chipname)); |
| |
| brcmf_info("using %s for chip %s\n", |
| mapping_table[i].fw_base, chipname); |
| |
| mp_path = brcmf_mp_global.firmware_path; |
| end = mp_path[strlen(mp_path) - 1]; |
| fwreq->n_items = n_fwnames; |
| |
| for (j = 0; j < n_fwnames; j++) { |
| fwreq->items[j].path = fwnames[j].path; |
| /* check if firmware path is provided by module parameter */ |
| if (brcmf_mp_global.firmware_path[0] != '\0') { |
| strlcpy(fwnames[j].path, mp_path, |
| BRCMF_FW_NAME_LEN); |
| |
| if (end != '/') { |
| strlcat(fwnames[j].path, "/", |
| BRCMF_FW_NAME_LEN); |
| } |
| } |
| strlcat(fwnames[j].path, mapping_table[i].fw_base, |
| BRCMF_FW_NAME_LEN); |
| strlcat(fwnames[j].path, fwnames[j].extension, |
| BRCMF_FW_NAME_LEN); |
| fwreq->items[j].path = fwnames[j].path; |
| } |
| |
| return fwreq; |
| } |