| * ST-Microelectronics SPI FSM Serial (NOR) Flash Controller |
| |
| Required properties: |
| - compatible : Should be "st,spi-fsm" |
| - reg : Contains register's location and length. |
| - reg-names : Should contain the reg names "spi-fsm" |
| - interrupts : The interrupt number |
| - pinctrl-0 : Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt) |
| |
| Optional properties: |
| - st,syscfg : Phandle to boot-device system configuration registers |
| - st,boot-device-reg : Address of the aforementioned boot-device register(s) |
| - st,boot-device-spi : Expected boot-device value if booted via this device |
| |
| Example: |
| spifsm: spifsm@fe902000{ |
| compatible = "st,spi-fsm"; |
| reg = <0xfe902000 0x1000>; |
| reg-names = "spi-fsm"; |
| pinctrl-0 = <&pinctrl_fsm>; |
| st,syscfg = <&syscfg_rear>; |
| st,boot-device-reg = <0x958>; |
| st,boot-device-spi = <0x1a>; |
| }; |
| |
