| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * GPIO interface for IT87xx Super I/O chips |
| * |
| * Author: Diego Elio Pettenò <flameeyes@flameeyes.eu> |
| * Copyright (c) 2017 Google, Inc. |
| * |
| * Based on it87_wdt.c by Oliver Schuster |
| * gpio-it8761e.c by Denis Turischev |
| * gpio-stmpe.c by Rabin Vincent |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/slab.h> |
| #include <linux/gpio/driver.h> |
| |
| /* Chip Id numbers */ |
| #define NO_DEV_ID 0xffff |
| #define IT8613_ID 0x8613 |
| #define IT8620_ID 0x8620 |
| #define IT8628_ID 0x8628 |
| #define IT8718_ID 0x8718 |
| #define IT8728_ID 0x8728 |
| #define IT8732_ID 0x8732 |
| #define IT8761_ID 0x8761 |
| #define IT8772_ID 0x8772 |
| #define IT8786_ID 0x8786 |
| |
| /* IO Ports */ |
| #define REG 0x2e |
| #define VAL 0x2f |
| |
| /* Logical device Numbers LDN */ |
| #define GPIO 0x07 |
| |
| /* Configuration Registers and Functions */ |
| #define LDNREG 0x07 |
| #define CHIPID 0x20 |
| #define CHIPREV 0x22 |
| |
| /** |
| * struct it87_gpio - it87-specific GPIO chip |
| * @chip: the underlying gpio_chip structure |
| * @lock: a lock to avoid races between operations |
| * @io_base: base address for gpio ports |
| * @io_size: size of the port rage starting from io_base. |
| * @output_base: Super I/O register address for Output Enable register |
| * @simple_base: Super I/O 'Simple I/O' Enable register |
| * @simple_size: Super IO 'Simple I/O' Enable register size; this is |
| * required because IT87xx chips might only provide Simple I/O |
| * switches on a subset of lines, whereas the others keep the |
| * same status all time. |
| */ |
| struct it87_gpio { |
| struct gpio_chip chip; |
| spinlock_t lock; |
| u16 io_base; |
| u16 io_size; |
| u8 output_base; |
| u8 simple_base; |
| u8 simple_size; |
| }; |
| |
| static struct it87_gpio it87_gpio_chip = { |
| .lock = __SPIN_LOCK_UNLOCKED(it87_gpio_chip.lock), |
| }; |
| |
| /* Superio chip access functions; copied from wdt_it87 */ |
| |
| static inline int superio_enter(void) |
| { |
| /* |
| * Try to reserve REG and REG + 1 for exclusive access. |
| */ |
| if (!request_muxed_region(REG, 2, KBUILD_MODNAME)) |
| return -EBUSY; |
| |
| outb(0x87, REG); |
| outb(0x01, REG); |
| outb(0x55, REG); |
| outb(0x55, REG); |
| return 0; |
| } |
| |
| static inline void superio_exit(void) |
| { |
| outb(0x02, REG); |
| outb(0x02, VAL); |
| release_region(REG, 2); |
| } |
| |
| static inline void superio_select(int ldn) |
| { |
| outb(LDNREG, REG); |
| outb(ldn, VAL); |
| } |
| |
| static inline int superio_inb(int reg) |
| { |
| outb(reg, REG); |
| return inb(VAL); |
| } |
| |
| static inline void superio_outb(int val, int reg) |
| { |
| outb(reg, REG); |
| outb(val, VAL); |
| } |
| |
| static inline int superio_inw(int reg) |
| { |
| int val; |
| |
| outb(reg++, REG); |
| val = inb(VAL) << 8; |
| outb(reg, REG); |
| val |= inb(VAL); |
| return val; |
| } |
| |
| static inline void superio_outw(int val, int reg) |
| { |
| outb(reg++, REG); |
| outb(val >> 8, VAL); |
| outb(reg, REG); |
| outb(val, VAL); |
| } |
| |
| static inline void superio_set_mask(int mask, int reg) |
| { |
| u8 curr_val = superio_inb(reg); |
| u8 new_val = curr_val | mask; |
| |
| if (curr_val != new_val) |
| superio_outb(new_val, reg); |
| } |
| |
| static inline void superio_clear_mask(int mask, int reg) |
| { |
| u8 curr_val = superio_inb(reg); |
| u8 new_val = curr_val & ~mask; |
| |
| if (curr_val != new_val) |
| superio_outb(new_val, reg); |
| } |
| |
| static int it87_gpio_request(struct gpio_chip *chip, unsigned gpio_num) |
| { |
| u8 mask, group; |
| int rc = 0; |
| struct it87_gpio *it87_gpio = gpiochip_get_data(chip); |
| |
| mask = 1 << (gpio_num % 8); |
| group = (gpio_num / 8); |
| |
| spin_lock(&it87_gpio->lock); |
| |
| rc = superio_enter(); |
| if (rc) |
| goto exit; |
| |
| /* not all the IT87xx chips support Simple I/O and not all of |
| * them allow all the lines to be set/unset to Simple I/O. |
| */ |
| if (group < it87_gpio->simple_size) |
| superio_set_mask(mask, group + it87_gpio->simple_base); |
| |
| /* clear output enable, setting the pin to input, as all the |
| * newly-exported GPIO interfaces are set to input. |
| */ |
| superio_clear_mask(mask, group + it87_gpio->output_base); |
| |
| superio_exit(); |
| |
| exit: |
| spin_unlock(&it87_gpio->lock); |
| return rc; |
| } |
| |
| static int it87_gpio_get(struct gpio_chip *chip, unsigned gpio_num) |
| { |
| u16 reg; |
| u8 mask; |
| struct it87_gpio *it87_gpio = gpiochip_get_data(chip); |
| |
| mask = 1 << (gpio_num % 8); |
| reg = (gpio_num / 8) + it87_gpio->io_base; |
| |
| return !!(inb(reg) & mask); |
| } |
| |
| static int it87_gpio_direction_in(struct gpio_chip *chip, unsigned gpio_num) |
| { |
| u8 mask, group; |
| int rc = 0; |
| struct it87_gpio *it87_gpio = gpiochip_get_data(chip); |
| |
| mask = 1 << (gpio_num % 8); |
| group = (gpio_num / 8); |
| |
| spin_lock(&it87_gpio->lock); |
| |
| rc = superio_enter(); |
| if (rc) |
| goto exit; |
| |
| /* clear the output enable bit */ |
| superio_clear_mask(mask, group + it87_gpio->output_base); |
| |
| superio_exit(); |
| |
| exit: |
| spin_unlock(&it87_gpio->lock); |
| return rc; |
| } |
| |
| static void it87_gpio_set(struct gpio_chip *chip, |
| unsigned gpio_num, int val) |
| { |
| u8 mask, curr_vals; |
| u16 reg; |
| struct it87_gpio *it87_gpio = gpiochip_get_data(chip); |
| |
| mask = 1 << (gpio_num % 8); |
| reg = (gpio_num / 8) + it87_gpio->io_base; |
| |
| curr_vals = inb(reg); |
| if (val) |
| outb(curr_vals | mask, reg); |
| else |
| outb(curr_vals & ~mask, reg); |
| } |
| |
| static int it87_gpio_direction_out(struct gpio_chip *chip, |
| unsigned gpio_num, int val) |
| { |
| u8 mask, group; |
| int rc = 0; |
| struct it87_gpio *it87_gpio = gpiochip_get_data(chip); |
| |
| mask = 1 << (gpio_num % 8); |
| group = (gpio_num / 8); |
| |
| spin_lock(&it87_gpio->lock); |
| |
| rc = superio_enter(); |
| if (rc) |
| goto exit; |
| |
| /* set the output enable bit */ |
| superio_set_mask(mask, group + it87_gpio->output_base); |
| |
| it87_gpio_set(chip, gpio_num, val); |
| |
| superio_exit(); |
| |
| exit: |
| spin_unlock(&it87_gpio->lock); |
| return rc; |
| } |
| |
| static const struct gpio_chip it87_template_chip = { |
| .label = KBUILD_MODNAME, |
| .owner = THIS_MODULE, |
| .request = it87_gpio_request, |
| .get = it87_gpio_get, |
| .direction_input = it87_gpio_direction_in, |
| .set = it87_gpio_set, |
| .direction_output = it87_gpio_direction_out, |
| .base = -1 |
| }; |
| |
| static int __init it87_gpio_init(void) |
| { |
| int rc = 0, i; |
| u16 chip_type; |
| u8 chip_rev, gpio_ba_reg; |
| char *labels, **labels_table; |
| |
| struct it87_gpio *it87_gpio = &it87_gpio_chip; |
| |
| rc = superio_enter(); |
| if (rc) |
| return rc; |
| |
| chip_type = superio_inw(CHIPID); |
| chip_rev = superio_inb(CHIPREV) & 0x0f; |
| superio_exit(); |
| |
| it87_gpio->chip = it87_template_chip; |
| |
| switch (chip_type) { |
| case IT8613_ID: |
| gpio_ba_reg = 0x62; |
| it87_gpio->io_size = 8; /* it8613 only needs 6, use 8 for alignment */ |
| it87_gpio->output_base = 0xc8; |
| it87_gpio->simple_base = 0xc0; |
| it87_gpio->simple_size = 6; |
| it87_gpio->chip.ngpio = 64; /* has 48, use 64 for convenient calc */ |
| break; |
| case IT8620_ID: |
| case IT8628_ID: |
| gpio_ba_reg = 0x62; |
| it87_gpio->io_size = 11; |
| it87_gpio->output_base = 0xc8; |
| it87_gpio->simple_size = 0; |
| it87_gpio->chip.ngpio = 64; |
| break; |
| case IT8718_ID: |
| case IT8728_ID: |
| case IT8732_ID: |
| case IT8772_ID: |
| case IT8786_ID: |
| gpio_ba_reg = 0x62; |
| it87_gpio->io_size = 8; |
| it87_gpio->output_base = 0xc8; |
| it87_gpio->simple_base = 0xc0; |
| it87_gpio->simple_size = 5; |
| it87_gpio->chip.ngpio = 64; |
| break; |
| case IT8761_ID: |
| gpio_ba_reg = 0x60; |
| it87_gpio->io_size = 4; |
| it87_gpio->output_base = 0xf0; |
| it87_gpio->simple_size = 0; |
| it87_gpio->chip.ngpio = 16; |
| break; |
| case NO_DEV_ID: |
| pr_err("no device\n"); |
| return -ENODEV; |
| default: |
| pr_err("Unknown Chip found, Chip %04x Revision %x\n", |
| chip_type, chip_rev); |
| return -ENODEV; |
| } |
| |
| rc = superio_enter(); |
| if (rc) |
| return rc; |
| |
| superio_select(GPIO); |
| |
| /* fetch GPIO base address */ |
| it87_gpio->io_base = superio_inw(gpio_ba_reg); |
| |
| superio_exit(); |
| |
| pr_info("Found Chip IT%04x rev %x. %u GPIO lines starting at %04xh\n", |
| chip_type, chip_rev, it87_gpio->chip.ngpio, |
| it87_gpio->io_base); |
| |
| if (!request_region(it87_gpio->io_base, it87_gpio->io_size, |
| KBUILD_MODNAME)) |
| return -EBUSY; |
| |
| /* Set up aliases for the GPIO connection. |
| * |
| * ITE documentation for recent chips such as the IT8728F |
| * refers to the GPIO lines as GPxy, with a coordinates system |
| * where x is the GPIO group (starting from 1) and y is the |
| * bit within the group. |
| * |
| * By creating these aliases, we make it easier to understand |
| * to which GPIO pin we're referring to. |
| */ |
| labels = kcalloc(it87_gpio->chip.ngpio, sizeof("it87_gpXY"), |
| GFP_KERNEL); |
| labels_table = kcalloc(it87_gpio->chip.ngpio, sizeof(const char *), |
| GFP_KERNEL); |
| |
| if (!labels || !labels_table) { |
| rc = -ENOMEM; |
| goto labels_free; |
| } |
| |
| for (i = 0; i < it87_gpio->chip.ngpio; i++) { |
| char *label = &labels[i * sizeof("it87_gpXY")]; |
| |
| sprintf(label, "it87_gp%u%u", 1+(i/8), i%8); |
| labels_table[i] = label; |
| } |
| |
| it87_gpio->chip.names = (const char *const*)labels_table; |
| |
| rc = gpiochip_add_data(&it87_gpio->chip, it87_gpio); |
| if (rc) |
| goto labels_free; |
| |
| return 0; |
| |
| labels_free: |
| kfree(labels_table); |
| kfree(labels); |
| release_region(it87_gpio->io_base, it87_gpio->io_size); |
| return rc; |
| } |
| |
| static void __exit it87_gpio_exit(void) |
| { |
| struct it87_gpio *it87_gpio = &it87_gpio_chip; |
| |
| gpiochip_remove(&it87_gpio->chip); |
| release_region(it87_gpio->io_base, it87_gpio->io_size); |
| kfree(it87_gpio->chip.names[0]); |
| kfree(it87_gpio->chip.names); |
| } |
| |
| module_init(it87_gpio_init); |
| module_exit(it87_gpio_exit); |
| |
| MODULE_AUTHOR("Diego Elio Pettenò <flameeyes@flameeyes.eu>"); |
| MODULE_DESCRIPTION("GPIO interface for IT87xx Super I/O chips"); |
| MODULE_LICENSE("GPL"); |