| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/spi/spi.h> |
| #include <linux/delay.h> |
| |
| #include <drm/drm_print.h> |
| |
| #include "panel-samsung-s6e63m0.h" |
| |
| #define DATA_MASK 0x100 |
| |
| static int s6e63m0_spi_dcs_read(struct device *dev, const u8 cmd, u8 *data) |
| { |
| /* |
| * FIXME: implement reading DCS commands over SPI so we can |
| * properly identify which physical panel is connected. |
| */ |
| *data = 0; |
| |
| return 0; |
| } |
| |
| static int s6e63m0_spi_write_word(struct device *dev, u16 data) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| struct spi_transfer xfer = { |
| .len = 2, |
| .tx_buf = &data, |
| }; |
| struct spi_message msg; |
| |
| spi_message_init(&msg); |
| spi_message_add_tail(&xfer, &msg); |
| |
| return spi_sync(spi, &msg); |
| } |
| |
| static int s6e63m0_spi_dcs_write(struct device *dev, const u8 *data, size_t len) |
| { |
| int ret = 0; |
| |
| dev_dbg(dev, "SPI writing dcs seq: %*ph\n", (int)len, data); |
| ret = s6e63m0_spi_write_word(dev, *data); |
| |
| while (!ret && --len) { |
| ++data; |
| ret = s6e63m0_spi_write_word(dev, *data | DATA_MASK); |
| } |
| |
| if (ret) { |
| dev_err(dev, "SPI error %d writing dcs seq: %*ph\n", ret, |
| (int)len, data); |
| } |
| |
| usleep_range(300, 310); |
| |
| return ret; |
| } |
| |
| static int s6e63m0_spi_probe(struct spi_device *spi) |
| { |
| struct device *dev = &spi->dev; |
| int ret; |
| |
| spi->bits_per_word = 9; |
| spi->mode = SPI_MODE_3; |
| ret = spi_setup(spi); |
| if (ret < 0) { |
| dev_err(dev, "spi setup failed.\n"); |
| return ret; |
| } |
| return s6e63m0_probe(dev, s6e63m0_spi_dcs_read, s6e63m0_spi_dcs_write, |
| false); |
| } |
| |
| static int s6e63m0_spi_remove(struct spi_device *spi) |
| { |
| return s6e63m0_remove(&spi->dev); |
| } |
| |
| static const struct of_device_id s6e63m0_spi_of_match[] = { |
| { .compatible = "samsung,s6e63m0" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, s6e63m0_spi_of_match); |
| |
| static struct spi_driver s6e63m0_spi_driver = { |
| .probe = s6e63m0_spi_probe, |
| .remove = s6e63m0_spi_remove, |
| .driver = { |
| .name = "panel-samsung-s6e63m0", |
| .of_match_table = s6e63m0_spi_of_match, |
| }, |
| }; |
| module_spi_driver(s6e63m0_spi_driver); |
| |
| MODULE_AUTHOR("Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>"); |
| MODULE_DESCRIPTION("s6e63m0 LCD SPI Driver"); |
| MODULE_LICENSE("GPL v2"); |