| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Analog Devices ADV7511 HDMI Transmitter Device Driver |
| * |
| * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved. |
| */ |
| |
| /* |
| * This file is named adv7511-v4l2.c so it doesn't conflict with the Analog |
| * Device ADV7511 (config fragment CONFIG_DRM_I2C_ADV7511). |
| */ |
| |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| #include <linux/videodev2.h> |
| #include <linux/gpio.h> |
| #include <linux/workqueue.h> |
| #include <linux/hdmi.h> |
| #include <linux/v4l2-dv-timings.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-dv-timings.h> |
| #include <media/i2c/adv7511.h> |
| #include <media/cec.h> |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "debug level (0-2)"); |
| |
| MODULE_DESCRIPTION("Analog Devices ADV7511 HDMI Transmitter Device Driver"); |
| MODULE_AUTHOR("Hans Verkuil"); |
| MODULE_LICENSE("GPL v2"); |
| |
| #define MASK_ADV7511_EDID_RDY_INT 0x04 |
| #define MASK_ADV7511_MSEN_INT 0x40 |
| #define MASK_ADV7511_HPD_INT 0x80 |
| |
| #define MASK_ADV7511_HPD_DETECT 0x40 |
| #define MASK_ADV7511_MSEN_DETECT 0x20 |
| #define MASK_ADV7511_EDID_RDY 0x10 |
| |
| #define EDID_MAX_RETRIES (8) |
| #define EDID_DELAY 250 |
| #define EDID_MAX_SEGM 8 |
| |
| #define ADV7511_MAX_WIDTH 1920 |
| #define ADV7511_MAX_HEIGHT 1200 |
| #define ADV7511_MIN_PIXELCLOCK 20000000 |
| #define ADV7511_MAX_PIXELCLOCK 225000000 |
| |
| #define ADV7511_MAX_ADDRS (3) |
| |
| /* |
| ********************************************************************** |
| * |
| * Arrays with configuration parameters for the ADV7511 |
| * |
| ********************************************************************** |
| */ |
| |
| struct i2c_reg_value { |
| unsigned char reg; |
| unsigned char value; |
| }; |
| |
| struct adv7511_state_edid { |
| /* total number of blocks */ |
| u32 blocks; |
| /* Number of segments read */ |
| u32 segments; |
| u8 data[EDID_MAX_SEGM * 256]; |
| /* Number of EDID read retries left */ |
| unsigned read_retries; |
| bool complete; |
| }; |
| |
| struct adv7511_state { |
| struct adv7511_platform_data pdata; |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_ctrl_handler hdl; |
| int chip_revision; |
| u8 i2c_edid_addr; |
| u8 i2c_pktmem_addr; |
| u8 i2c_cec_addr; |
| |
| struct i2c_client *i2c_cec; |
| struct cec_adapter *cec_adap; |
| u8 cec_addr[ADV7511_MAX_ADDRS]; |
| u8 cec_valid_addrs; |
| bool cec_enabled_adap; |
| |
| /* Is the adv7511 powered on? */ |
| bool power_on; |
| /* Did we receive hotplug and rx-sense signals? */ |
| bool have_monitor; |
| bool enabled_irq; |
| /* timings from s_dv_timings */ |
| struct v4l2_dv_timings dv_timings; |
| u32 fmt_code; |
| u32 colorspace; |
| u32 ycbcr_enc; |
| u32 quantization; |
| u32 xfer_func; |
| u32 content_type; |
| /* controls */ |
| struct v4l2_ctrl *hdmi_mode_ctrl; |
| struct v4l2_ctrl *hotplug_ctrl; |
| struct v4l2_ctrl *rx_sense_ctrl; |
| struct v4l2_ctrl *have_edid0_ctrl; |
| struct v4l2_ctrl *rgb_quantization_range_ctrl; |
| struct v4l2_ctrl *content_type_ctrl; |
| struct i2c_client *i2c_edid; |
| struct i2c_client *i2c_pktmem; |
| struct adv7511_state_edid edid; |
| /* Running counter of the number of detected EDIDs (for debugging) */ |
| unsigned edid_detect_counter; |
| struct workqueue_struct *work_queue; |
| struct delayed_work edid_handler; /* work entry */ |
| }; |
| |
| static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd); |
| static bool adv7511_check_edid_status(struct v4l2_subdev *sd); |
| static void adv7511_setup(struct v4l2_subdev *sd); |
| static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq); |
| static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq); |
| |
| |
| static const struct v4l2_dv_timings_cap adv7511_timings_cap = { |
| .type = V4L2_DV_BT_656_1120, |
| /* keep this initialization for compatibility with GCC < 4.4.6 */ |
| .reserved = { 0 }, |
| V4L2_INIT_BT_TIMINGS(640, ADV7511_MAX_WIDTH, 350, ADV7511_MAX_HEIGHT, |
| ADV7511_MIN_PIXELCLOCK, ADV7511_MAX_PIXELCLOCK, |
| V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | |
| V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT, |
| V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING | |
| V4L2_DV_BT_CAP_CUSTOM) |
| }; |
| |
| static inline struct adv7511_state *get_adv7511_state(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct adv7511_state, sd); |
| } |
| |
| static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) |
| { |
| return &container_of(ctrl->handler, struct adv7511_state, hdl)->sd; |
| } |
| |
| /* ------------------------ I2C ----------------------------------------------- */ |
| |
| static s32 adv_smbus_read_byte_data_check(struct i2c_client *client, |
| u8 command, bool check) |
| { |
| union i2c_smbus_data data; |
| |
| if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags, |
| I2C_SMBUS_READ, command, |
| I2C_SMBUS_BYTE_DATA, &data)) |
| return data.byte; |
| if (check) |
| v4l_err(client, "error reading %02x, %02x\n", |
| client->addr, command); |
| return -1; |
| } |
| |
| static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command) |
| { |
| int i; |
| for (i = 0; i < 3; i++) { |
| int ret = adv_smbus_read_byte_data_check(client, command, true); |
| if (ret >= 0) { |
| if (i) |
| v4l_err(client, "read ok after %d retries\n", i); |
| return ret; |
| } |
| } |
| v4l_err(client, "read failed\n"); |
| return -1; |
| } |
| |
| static int adv7511_rd(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| return adv_smbus_read_byte_data(client, reg); |
| } |
| |
| static int adv7511_wr(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int ret; |
| int i; |
| |
| for (i = 0; i < 3; i++) { |
| ret = i2c_smbus_write_byte_data(client, reg, val); |
| if (ret == 0) |
| return 0; |
| } |
| v4l2_err(sd, "%s: i2c write error\n", __func__); |
| return ret; |
| } |
| |
| /* To set specific bits in the register, a clear-mask is given (to be AND-ed), |
| and then the value-mask (to be OR-ed). */ |
| static inline void adv7511_wr_and_or(struct v4l2_subdev *sd, u8 reg, u8 clr_mask, u8 val_mask) |
| { |
| adv7511_wr(sd, reg, (adv7511_rd(sd, reg) & clr_mask) | val_mask); |
| } |
| |
| static int adv_smbus_read_i2c_block_data(struct i2c_client *client, |
| u8 command, unsigned length, u8 *values) |
| { |
| union i2c_smbus_data data; |
| int ret; |
| |
| if (length > I2C_SMBUS_BLOCK_MAX) |
| length = I2C_SMBUS_BLOCK_MAX; |
| data.block[0] = length; |
| |
| ret = i2c_smbus_xfer(client->adapter, client->addr, client->flags, |
| I2C_SMBUS_READ, command, |
| I2C_SMBUS_I2C_BLOCK_DATA, &data); |
| memcpy(values, data.block + 1, length); |
| return ret; |
| } |
| |
| static void adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t *buf) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| int i; |
| int err = 0; |
| |
| v4l2_dbg(1, debug, sd, "%s:\n", __func__); |
| |
| for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX) |
| err = adv_smbus_read_i2c_block_data(state->i2c_edid, i, |
| I2C_SMBUS_BLOCK_MAX, buf + i); |
| if (err) |
| v4l2_err(sd, "%s: i2c read error\n", __func__); |
| } |
| |
| static inline int adv7511_cec_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| return i2c_smbus_read_byte_data(state->i2c_cec, reg); |
| } |
| |
| static int adv7511_cec_write(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| int ret; |
| int i; |
| |
| for (i = 0; i < 3; i++) { |
| ret = i2c_smbus_write_byte_data(state->i2c_cec, reg, val); |
| if (ret == 0) |
| return 0; |
| } |
| v4l2_err(sd, "%s: I2C Write Problem\n", __func__); |
| return ret; |
| } |
| |
| static inline int adv7511_cec_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, |
| u8 val) |
| { |
| return adv7511_cec_write(sd, reg, (adv7511_cec_read(sd, reg) & mask) | val); |
| } |
| |
| static int adv7511_pktmem_rd(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| return adv_smbus_read_byte_data(state->i2c_pktmem, reg); |
| } |
| |
| static int adv7511_pktmem_wr(struct v4l2_subdev *sd, u8 reg, u8 val) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| int ret; |
| int i; |
| |
| for (i = 0; i < 3; i++) { |
| ret = i2c_smbus_write_byte_data(state->i2c_pktmem, reg, val); |
| if (ret == 0) |
| return 0; |
| } |
| v4l2_err(sd, "%s: i2c write error\n", __func__); |
| return ret; |
| } |
| |
| /* To set specific bits in the register, a clear-mask is given (to be AND-ed), |
| and then the value-mask (to be OR-ed). */ |
| static inline void adv7511_pktmem_wr_and_or(struct v4l2_subdev *sd, u8 reg, u8 clr_mask, u8 val_mask) |
| { |
| adv7511_pktmem_wr(sd, reg, (adv7511_pktmem_rd(sd, reg) & clr_mask) | val_mask); |
| } |
| |
| static inline bool adv7511_have_hotplug(struct v4l2_subdev *sd) |
| { |
| return adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT; |
| } |
| |
| static inline bool adv7511_have_rx_sense(struct v4l2_subdev *sd) |
| { |
| return adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT; |
| } |
| |
| static void adv7511_csc_conversion_mode(struct v4l2_subdev *sd, u8 mode) |
| { |
| adv7511_wr_and_or(sd, 0x18, 0x9f, (mode & 0x3)<<5); |
| } |
| |
| static void adv7511_csc_coeff(struct v4l2_subdev *sd, |
| u16 A1, u16 A2, u16 A3, u16 A4, |
| u16 B1, u16 B2, u16 B3, u16 B4, |
| u16 C1, u16 C2, u16 C3, u16 C4) |
| { |
| /* A */ |
| adv7511_wr_and_or(sd, 0x18, 0xe0, A1>>8); |
| adv7511_wr(sd, 0x19, A1); |
| adv7511_wr_and_or(sd, 0x1A, 0xe0, A2>>8); |
| adv7511_wr(sd, 0x1B, A2); |
| adv7511_wr_and_or(sd, 0x1c, 0xe0, A3>>8); |
| adv7511_wr(sd, 0x1d, A3); |
| adv7511_wr_and_or(sd, 0x1e, 0xe0, A4>>8); |
| adv7511_wr(sd, 0x1f, A4); |
| |
| /* B */ |
| adv7511_wr_and_or(sd, 0x20, 0xe0, B1>>8); |
| adv7511_wr(sd, 0x21, B1); |
| adv7511_wr_and_or(sd, 0x22, 0xe0, B2>>8); |
| adv7511_wr(sd, 0x23, B2); |
| adv7511_wr_and_or(sd, 0x24, 0xe0, B3>>8); |
| adv7511_wr(sd, 0x25, B3); |
| adv7511_wr_and_or(sd, 0x26, 0xe0, B4>>8); |
| adv7511_wr(sd, 0x27, B4); |
| |
| /* C */ |
| adv7511_wr_and_or(sd, 0x28, 0xe0, C1>>8); |
| adv7511_wr(sd, 0x29, C1); |
| adv7511_wr_and_or(sd, 0x2A, 0xe0, C2>>8); |
| adv7511_wr(sd, 0x2B, C2); |
| adv7511_wr_and_or(sd, 0x2C, 0xe0, C3>>8); |
| adv7511_wr(sd, 0x2D, C3); |
| adv7511_wr_and_or(sd, 0x2E, 0xe0, C4>>8); |
| adv7511_wr(sd, 0x2F, C4); |
| } |
| |
| static void adv7511_csc_rgb_full2limit(struct v4l2_subdev *sd, bool enable) |
| { |
| if (enable) { |
| u8 csc_mode = 0; |
| adv7511_csc_conversion_mode(sd, csc_mode); |
| adv7511_csc_coeff(sd, |
| 4096-564, 0, 0, 256, |
| 0, 4096-564, 0, 256, |
| 0, 0, 4096-564, 256); |
| /* enable CSC */ |
| adv7511_wr_and_or(sd, 0x18, 0x7f, 0x80); |
| /* AVI infoframe: Limited range RGB (16-235) */ |
| adv7511_wr_and_or(sd, 0x57, 0xf3, 0x04); |
| } else { |
| /* disable CSC */ |
| adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0); |
| /* AVI infoframe: Full range RGB (0-255) */ |
| adv7511_wr_and_or(sd, 0x57, 0xf3, 0x08); |
| } |
| } |
| |
| static void adv7511_set_rgb_quantization_mode(struct v4l2_subdev *sd, struct v4l2_ctrl *ctrl) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| /* Only makes sense for RGB formats */ |
| if (state->fmt_code != MEDIA_BUS_FMT_RGB888_1X24) { |
| /* so just keep quantization */ |
| adv7511_csc_rgb_full2limit(sd, false); |
| return; |
| } |
| |
| switch (ctrl->val) { |
| case V4L2_DV_RGB_RANGE_AUTO: |
| /* automatic */ |
| if (state->dv_timings.bt.flags & V4L2_DV_FL_IS_CE_VIDEO) { |
| /* CE format, RGB limited range (16-235) */ |
| adv7511_csc_rgb_full2limit(sd, true); |
| } else { |
| /* not CE format, RGB full range (0-255) */ |
| adv7511_csc_rgb_full2limit(sd, false); |
| } |
| break; |
| case V4L2_DV_RGB_RANGE_LIMITED: |
| /* RGB limited range (16-235) */ |
| adv7511_csc_rgb_full2limit(sd, true); |
| break; |
| case V4L2_DV_RGB_RANGE_FULL: |
| /* RGB full range (0-255) */ |
| adv7511_csc_rgb_full2limit(sd, false); |
| break; |
| } |
| } |
| |
| /* ------------------------------ CTRL OPS ------------------------------ */ |
| |
| static int adv7511_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct v4l2_subdev *sd = to_sd(ctrl); |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| v4l2_dbg(1, debug, sd, "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val); |
| |
| if (state->hdmi_mode_ctrl == ctrl) { |
| /* Set HDMI or DVI-D */ |
| adv7511_wr_and_or(sd, 0xaf, 0xfd, ctrl->val == V4L2_DV_TX_MODE_HDMI ? 0x02 : 0x00); |
| return 0; |
| } |
| if (state->rgb_quantization_range_ctrl == ctrl) { |
| adv7511_set_rgb_quantization_mode(sd, ctrl); |
| return 0; |
| } |
| if (state->content_type_ctrl == ctrl) { |
| u8 itc, cn; |
| |
| state->content_type = ctrl->val; |
| itc = state->content_type != V4L2_DV_IT_CONTENT_TYPE_NO_ITC; |
| cn = itc ? state->content_type : V4L2_DV_IT_CONTENT_TYPE_GRAPHICS; |
| adv7511_wr_and_or(sd, 0x57, 0x7f, itc << 7); |
| adv7511_wr_and_or(sd, 0x59, 0xcf, cn << 4); |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static const struct v4l2_ctrl_ops adv7511_ctrl_ops = { |
| .s_ctrl = adv7511_s_ctrl, |
| }; |
| |
| /* ---------------------------- CORE OPS ------------------------------------------- */ |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static void adv7511_inv_register(struct v4l2_subdev *sd) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| v4l2_info(sd, "0x000-0x0ff: Main Map\n"); |
| if (state->i2c_cec) |
| v4l2_info(sd, "0x100-0x1ff: CEC Map\n"); |
| } |
| |
| static int adv7511_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| reg->size = 1; |
| switch (reg->reg >> 8) { |
| case 0: |
| reg->val = adv7511_rd(sd, reg->reg & 0xff); |
| break; |
| case 1: |
| if (state->i2c_cec) { |
| reg->val = adv7511_cec_read(sd, reg->reg & 0xff); |
| break; |
| } |
| fallthrough; |
| default: |
| v4l2_info(sd, "Register %03llx not supported\n", reg->reg); |
| adv7511_inv_register(sd); |
| break; |
| } |
| return 0; |
| } |
| |
| static int adv7511_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| switch (reg->reg >> 8) { |
| case 0: |
| adv7511_wr(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| case 1: |
| if (state->i2c_cec) { |
| adv7511_cec_write(sd, reg->reg & 0xff, reg->val & 0xff); |
| break; |
| } |
| fallthrough; |
| default: |
| v4l2_info(sd, "Register %03llx not supported\n", reg->reg); |
| adv7511_inv_register(sd); |
| break; |
| } |
| return 0; |
| } |
| #endif |
| |
| struct adv7511_cfg_read_infoframe { |
| const char *desc; |
| u8 present_reg; |
| u8 present_mask; |
| u8 header[3]; |
| u16 payload_addr; |
| }; |
| |
| static u8 hdmi_infoframe_checksum(u8 *ptr, size_t size) |
| { |
| u8 csum = 0; |
| size_t i; |
| |
| /* compute checksum */ |
| for (i = 0; i < size; i++) |
| csum += ptr[i]; |
| |
| return 256 - csum; |
| } |
| |
| static void log_infoframe(struct v4l2_subdev *sd, const struct adv7511_cfg_read_infoframe *cri) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct device *dev = &client->dev; |
| union hdmi_infoframe frame; |
| u8 buffer[32]; |
| u8 len; |
| int i; |
| |
| if (!(adv7511_rd(sd, cri->present_reg) & cri->present_mask)) { |
| v4l2_info(sd, "%s infoframe not transmitted\n", cri->desc); |
| return; |
| } |
| |
| memcpy(buffer, cri->header, sizeof(cri->header)); |
| |
| len = buffer[2]; |
| |
| if (len + 4 > sizeof(buffer)) { |
| v4l2_err(sd, "%s: invalid %s infoframe length %d\n", __func__, cri->desc, len); |
| return; |
| } |
| |
| if (cri->payload_addr >= 0x100) { |
| for (i = 0; i < len; i++) |
| buffer[i + 4] = adv7511_pktmem_rd(sd, cri->payload_addr + i - 0x100); |
| } else { |
| for (i = 0; i < len; i++) |
| buffer[i + 4] = adv7511_rd(sd, cri->payload_addr + i); |
| } |
| buffer[3] = 0; |
| buffer[3] = hdmi_infoframe_checksum(buffer, len + 4); |
| |
| if (hdmi_infoframe_unpack(&frame, buffer, sizeof(buffer)) < 0) { |
| v4l2_err(sd, "%s: unpack of %s infoframe failed\n", __func__, cri->desc); |
| return; |
| } |
| |
| hdmi_infoframe_log(KERN_INFO, dev, &frame); |
| } |
| |
| static void adv7511_log_infoframes(struct v4l2_subdev *sd) |
| { |
| static const struct adv7511_cfg_read_infoframe cri[] = { |
| { "AVI", 0x44, 0x10, { 0x82, 2, 13 }, 0x55 }, |
| { "Audio", 0x44, 0x08, { 0x84, 1, 10 }, 0x73 }, |
| { "SDP", 0x40, 0x40, { 0x83, 1, 25 }, 0x103 }, |
| }; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(cri); i++) |
| log_infoframe(sd, &cri[i]); |
| } |
| |
| static int adv7511_log_status(struct v4l2_subdev *sd) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| struct adv7511_state_edid *edid = &state->edid; |
| int i; |
| |
| static const char * const states[] = { |
| "in reset", |
| "reading EDID", |
| "idle", |
| "initializing HDCP", |
| "HDCP enabled", |
| "initializing HDCP repeater", |
| "6", "7", "8", "9", "A", "B", "C", "D", "E", "F" |
| }; |
| static const char * const errors[] = { |
| "no error", |
| "bad receiver BKSV", |
| "Ri mismatch", |
| "Pj mismatch", |
| "i2c error", |
| "timed out", |
| "max repeater cascade exceeded", |
| "hash check failed", |
| "too many devices", |
| "9", "A", "B", "C", "D", "E", "F" |
| }; |
| |
| v4l2_info(sd, "power %s\n", state->power_on ? "on" : "off"); |
| v4l2_info(sd, "%s hotplug, %s Rx Sense, %s EDID (%d block(s))\n", |
| (adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT) ? "detected" : "no", |
| (adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT) ? "detected" : "no", |
| edid->segments ? "found" : "no", |
| edid->blocks); |
| v4l2_info(sd, "%s output %s\n", |
| (adv7511_rd(sd, 0xaf) & 0x02) ? |
| "HDMI" : "DVI-D", |
| (adv7511_rd(sd, 0xa1) & 0x3c) ? |
| "disabled" : "enabled"); |
| v4l2_info(sd, "state: %s, error: %s, detect count: %u, msk/irq: %02x/%02x\n", |
| states[adv7511_rd(sd, 0xc8) & 0xf], |
| errors[adv7511_rd(sd, 0xc8) >> 4], state->edid_detect_counter, |
| adv7511_rd(sd, 0x94), adv7511_rd(sd, 0x96)); |
| v4l2_info(sd, "RGB quantization: %s range\n", adv7511_rd(sd, 0x18) & 0x80 ? "limited" : "full"); |
| if (adv7511_rd(sd, 0xaf) & 0x02) { |
| /* HDMI only */ |
| u8 manual_cts = adv7511_rd(sd, 0x0a) & 0x80; |
| u32 N = (adv7511_rd(sd, 0x01) & 0xf) << 16 | |
| adv7511_rd(sd, 0x02) << 8 | |
| adv7511_rd(sd, 0x03); |
| u8 vic_detect = adv7511_rd(sd, 0x3e) >> 2; |
| u8 vic_sent = adv7511_rd(sd, 0x3d) & 0x3f; |
| u32 CTS; |
| |
| if (manual_cts) |
| CTS = (adv7511_rd(sd, 0x07) & 0xf) << 16 | |
| adv7511_rd(sd, 0x08) << 8 | |
| adv7511_rd(sd, 0x09); |
| else |
| CTS = (adv7511_rd(sd, 0x04) & 0xf) << 16 | |
| adv7511_rd(sd, 0x05) << 8 | |
| adv7511_rd(sd, 0x06); |
| v4l2_info(sd, "CTS %s mode: N %d, CTS %d\n", |
| manual_cts ? "manual" : "automatic", N, CTS); |
| v4l2_info(sd, "VIC: detected %d, sent %d\n", |
| vic_detect, vic_sent); |
| adv7511_log_infoframes(sd); |
| } |
| if (state->dv_timings.type == V4L2_DV_BT_656_1120) |
| v4l2_print_dv_timings(sd->name, "timings: ", |
| &state->dv_timings, false); |
| else |
| v4l2_info(sd, "no timings set\n"); |
| v4l2_info(sd, "i2c edid addr: 0x%x\n", state->i2c_edid_addr); |
| |
| if (state->i2c_cec == NULL) |
| return 0; |
| |
| v4l2_info(sd, "i2c cec addr: 0x%x\n", state->i2c_cec_addr); |
| |
| v4l2_info(sd, "CEC: %s\n", state->cec_enabled_adap ? |
| "enabled" : "disabled"); |
| if (state->cec_enabled_adap) { |
| for (i = 0; i < ADV7511_MAX_ADDRS; i++) { |
| bool is_valid = state->cec_valid_addrs & (1 << i); |
| |
| if (is_valid) |
| v4l2_info(sd, "CEC Logical Address: 0x%x\n", |
| state->cec_addr[i]); |
| } |
| } |
| v4l2_info(sd, "i2c pktmem addr: 0x%x\n", state->i2c_pktmem_addr); |
| return 0; |
| } |
| |
| /* Power up/down adv7511 */ |
| static int adv7511_s_power(struct v4l2_subdev *sd, int on) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| const int retries = 20; |
| int i; |
| |
| v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off"); |
| |
| state->power_on = on; |
| |
| if (!on) { |
| /* Power down */ |
| adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40); |
| return true; |
| } |
| |
| /* Power up */ |
| /* The adv7511 does not always come up immediately. |
| Retry multiple times. */ |
| for (i = 0; i < retries; i++) { |
| adv7511_wr_and_or(sd, 0x41, 0xbf, 0x0); |
| if ((adv7511_rd(sd, 0x41) & 0x40) == 0) |
| break; |
| adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40); |
| msleep(10); |
| } |
| if (i == retries) { |
| v4l2_dbg(1, debug, sd, "%s: failed to powerup the adv7511!\n", __func__); |
| adv7511_s_power(sd, 0); |
| return false; |
| } |
| if (i > 1) |
| v4l2_dbg(1, debug, sd, "%s: needed %d retries to powerup the adv7511\n", __func__, i); |
| |
| /* Reserved registers that must be set */ |
| adv7511_wr(sd, 0x98, 0x03); |
| adv7511_wr_and_or(sd, 0x9a, 0xfe, 0x70); |
| adv7511_wr(sd, 0x9c, 0x30); |
| adv7511_wr_and_or(sd, 0x9d, 0xfc, 0x01); |
| adv7511_wr(sd, 0xa2, 0xa4); |
| adv7511_wr(sd, 0xa3, 0xa4); |
| adv7511_wr(sd, 0xe0, 0xd0); |
| adv7511_wr(sd, 0xf9, 0x00); |
| |
| adv7511_wr(sd, 0x43, state->i2c_edid_addr); |
| adv7511_wr(sd, 0x45, state->i2c_pktmem_addr); |
| |
| /* Set number of attempts to read the EDID */ |
| adv7511_wr(sd, 0xc9, 0xf); |
| return true; |
| } |
| |
| #if IS_ENABLED(CONFIG_VIDEO_ADV7511_CEC) |
| static int adv7511_cec_adap_enable(struct cec_adapter *adap, bool enable) |
| { |
| struct adv7511_state *state = cec_get_drvdata(adap); |
| struct v4l2_subdev *sd = &state->sd; |
| |
| if (state->i2c_cec == NULL) |
| return -EIO; |
| |
| if (!state->cec_enabled_adap && enable) { |
| /* power up cec section */ |
| adv7511_cec_write_and_or(sd, 0x4e, 0xfc, 0x01); |
| /* legacy mode and clear all rx buffers */ |
| adv7511_cec_write(sd, 0x4a, 0x00); |
| adv7511_cec_write(sd, 0x4a, 0x07); |
| adv7511_cec_write_and_or(sd, 0x11, 0xfe, 0); /* initially disable tx */ |
| /* enabled irqs: */ |
| /* tx: ready */ |
| /* tx: arbitration lost */ |
| /* tx: retry timeout */ |
| /* rx: ready 1 */ |
| if (state->enabled_irq) |
| adv7511_wr_and_or(sd, 0x95, 0xc0, 0x39); |
| } else if (state->cec_enabled_adap && !enable) { |
| if (state->enabled_irq) |
| adv7511_wr_and_or(sd, 0x95, 0xc0, 0x00); |
| /* disable address mask 1-3 */ |
| adv7511_cec_write_and_or(sd, 0x4b, 0x8f, 0x00); |
| /* power down cec section */ |
| adv7511_cec_write_and_or(sd, 0x4e, 0xfc, 0x00); |
| state->cec_valid_addrs = 0; |
| } |
| state->cec_enabled_adap = enable; |
| return 0; |
| } |
| |
| static int adv7511_cec_adap_log_addr(struct cec_adapter *adap, u8 addr) |
| { |
| struct adv7511_state *state = cec_get_drvdata(adap); |
| struct v4l2_subdev *sd = &state->sd; |
| unsigned int i, free_idx = ADV7511_MAX_ADDRS; |
| |
| if (!state->cec_enabled_adap) |
| return addr == CEC_LOG_ADDR_INVALID ? 0 : -EIO; |
| |
| if (addr == CEC_LOG_ADDR_INVALID) { |
| adv7511_cec_write_and_or(sd, 0x4b, 0x8f, 0); |
| state->cec_valid_addrs = 0; |
| return 0; |
| } |
| |
| for (i = 0; i < ADV7511_MAX_ADDRS; i++) { |
| bool is_valid = state->cec_valid_addrs & (1 << i); |
| |
| if (free_idx == ADV7511_MAX_ADDRS && !is_valid) |
| free_idx = i; |
| if (is_valid && state->cec_addr[i] == addr) |
| return 0; |
| } |
| if (i == ADV7511_MAX_ADDRS) { |
| i = free_idx; |
| if (i == ADV7511_MAX_ADDRS) |
| return -ENXIO; |
| } |
| state->cec_addr[i] = addr; |
| state->cec_valid_addrs |= 1 << i; |
| |
| switch (i) { |
| case 0: |
| /* enable address mask 0 */ |
| adv7511_cec_write_and_or(sd, 0x4b, 0xef, 0x10); |
| /* set address for mask 0 */ |
| adv7511_cec_write_and_or(sd, 0x4c, 0xf0, addr); |
| break; |
| case 1: |
| /* enable address mask 1 */ |
| adv7511_cec_write_and_or(sd, 0x4b, 0xdf, 0x20); |
| /* set address for mask 1 */ |
| adv7511_cec_write_and_or(sd, 0x4c, 0x0f, addr << 4); |
| break; |
| case 2: |
| /* enable address mask 2 */ |
| adv7511_cec_write_and_or(sd, 0x4b, 0xbf, 0x40); |
| /* set address for mask 1 */ |
| adv7511_cec_write_and_or(sd, 0x4d, 0xf0, addr); |
| break; |
| } |
| return 0; |
| } |
| |
| static int adv7511_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, |
| u32 signal_free_time, struct cec_msg *msg) |
| { |
| struct adv7511_state *state = cec_get_drvdata(adap); |
| struct v4l2_subdev *sd = &state->sd; |
| u8 len = msg->len; |
| unsigned int i; |
| |
| v4l2_dbg(1, debug, sd, "%s: len %d\n", __func__, len); |
| |
| if (len > 16) { |
| v4l2_err(sd, "%s: len exceeded 16 (%d)\n", __func__, len); |
| return -EINVAL; |
| } |
| |
| /* |
| * The number of retries is the number of attempts - 1, but retry |
| * at least once. It's not clear if a value of 0 is allowed, so |
| * let's do at least one retry. |
| */ |
| adv7511_cec_write_and_or(sd, 0x12, ~0x70, max(1, attempts - 1) << 4); |
| |
| /* clear cec tx irq status */ |
| adv7511_wr(sd, 0x97, 0x38); |
| |
| /* write data */ |
| for (i = 0; i < len; i++) |
| adv7511_cec_write(sd, i, msg->msg[i]); |
| |
| /* set length (data + header) */ |
| adv7511_cec_write(sd, 0x10, len); |
| /* start transmit, enable tx */ |
| adv7511_cec_write(sd, 0x11, 0x01); |
| return 0; |
| } |
| |
| static void adv_cec_tx_raw_status(struct v4l2_subdev *sd, u8 tx_raw_status) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| if ((adv7511_cec_read(sd, 0x11) & 0x01) == 0) { |
| v4l2_dbg(1, debug, sd, "%s: tx raw: tx disabled\n", __func__); |
| return; |
| } |
| |
| if (tx_raw_status & 0x10) { |
| v4l2_dbg(1, debug, sd, |
| "%s: tx raw: arbitration lost\n", __func__); |
| cec_transmit_done(state->cec_adap, CEC_TX_STATUS_ARB_LOST, |
| 1, 0, 0, 0); |
| return; |
| } |
| if (tx_raw_status & 0x08) { |
| u8 status; |
| u8 nack_cnt; |
| u8 low_drive_cnt; |
| |
| v4l2_dbg(1, debug, sd, "%s: tx raw: retry failed\n", __func__); |
| /* |
| * We set this status bit since this hardware performs |
| * retransmissions. |
| */ |
| status = CEC_TX_STATUS_MAX_RETRIES; |
| nack_cnt = adv7511_cec_read(sd, 0x14) & 0xf; |
| if (nack_cnt) |
| status |= CEC_TX_STATUS_NACK; |
| low_drive_cnt = adv7511_cec_read(sd, 0x14) >> 4; |
| if (low_drive_cnt) |
| status |= CEC_TX_STATUS_LOW_DRIVE; |
| cec_transmit_done(state->cec_adap, status, |
| 0, nack_cnt, low_drive_cnt, 0); |
| return; |
| } |
| if (tx_raw_status & 0x20) { |
| v4l2_dbg(1, debug, sd, "%s: tx raw: ready ok\n", __func__); |
| cec_transmit_done(state->cec_adap, CEC_TX_STATUS_OK, 0, 0, 0, 0); |
| return; |
| } |
| } |
| |
| static const struct cec_adap_ops adv7511_cec_adap_ops = { |
| .adap_enable = adv7511_cec_adap_enable, |
| .adap_log_addr = adv7511_cec_adap_log_addr, |
| .adap_transmit = adv7511_cec_adap_transmit, |
| }; |
| #endif |
| |
| /* Enable interrupts */ |
| static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| u8 irqs = MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT; |
| u8 irqs_rd; |
| int retries = 100; |
| |
| v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ? "enable" : "disable"); |
| |
| if (state->enabled_irq == enable) |
| return; |
| state->enabled_irq = enable; |
| |
| /* The datasheet says that the EDID ready interrupt should be |
| disabled if there is no hotplug. */ |
| if (!enable) |
| irqs = 0; |
| else if (adv7511_have_hotplug(sd)) |
| irqs |= MASK_ADV7511_EDID_RDY_INT; |
| |
| /* |
| * This i2c write can fail (approx. 1 in 1000 writes). But it |
| * is essential that this register is correct, so retry it |
| * multiple times. |
| * |
| * Note that the i2c write does not report an error, but the readback |
| * clearly shows the wrong value. |
| */ |
| do { |
| adv7511_wr(sd, 0x94, irqs); |
| irqs_rd = adv7511_rd(sd, 0x94); |
| } while (retries-- && irqs_rd != irqs); |
| |
| if (irqs_rd != irqs) |
| v4l2_err(sd, "Could not set interrupts: hw failure?\n"); |
| |
| adv7511_wr_and_or(sd, 0x95, 0xc0, |
| (state->cec_enabled_adap && enable) ? 0x39 : 0x00); |
| } |
| |
| /* Interrupt handler */ |
| static int adv7511_isr(struct v4l2_subdev *sd, u32 status, bool *handled) |
| { |
| u8 irq_status; |
| u8 cec_irq; |
| |
| /* disable interrupts to prevent a race condition */ |
| adv7511_set_isr(sd, false); |
| irq_status = adv7511_rd(sd, 0x96); |
| cec_irq = adv7511_rd(sd, 0x97); |
| /* clear detected interrupts */ |
| adv7511_wr(sd, 0x96, irq_status); |
| adv7511_wr(sd, 0x97, cec_irq); |
| |
| v4l2_dbg(1, debug, sd, "%s: irq 0x%x, cec-irq 0x%x\n", __func__, |
| irq_status, cec_irq); |
| |
| if (irq_status & (MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT)) |
| adv7511_check_monitor_present_status(sd); |
| if (irq_status & MASK_ADV7511_EDID_RDY_INT) |
| adv7511_check_edid_status(sd); |
| |
| #if IS_ENABLED(CONFIG_VIDEO_ADV7511_CEC) |
| if (cec_irq & 0x38) |
| adv_cec_tx_raw_status(sd, cec_irq); |
| |
| if (cec_irq & 1) { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| struct cec_msg msg; |
| |
| msg.len = adv7511_cec_read(sd, 0x25) & 0x1f; |
| |
| v4l2_dbg(1, debug, sd, "%s: cec msg len %d\n", __func__, |
| msg.len); |
| |
| if (msg.len > 16) |
| msg.len = 16; |
| |
| if (msg.len) { |
| u8 i; |
| |
| for (i = 0; i < msg.len; i++) |
| msg.msg[i] = adv7511_cec_read(sd, i + 0x15); |
| |
| adv7511_cec_write(sd, 0x4a, 0); /* toggle to re-enable rx 1 */ |
| adv7511_cec_write(sd, 0x4a, 1); |
| cec_received_msg(state->cec_adap, &msg); |
| } |
| } |
| #endif |
| |
| /* enable interrupts */ |
| adv7511_set_isr(sd, true); |
| |
| if (handled) |
| *handled = true; |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_core_ops adv7511_core_ops = { |
| .log_status = adv7511_log_status, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = adv7511_g_register, |
| .s_register = adv7511_s_register, |
| #endif |
| .s_power = adv7511_s_power, |
| .interrupt_service_routine = adv7511_isr, |
| }; |
| |
| /* ------------------------------ VIDEO OPS ------------------------------ */ |
| |
| /* Enable/disable adv7511 output */ |
| static int adv7511_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); |
| adv7511_wr_and_or(sd, 0xa1, ~0x3c, (enable ? 0 : 0x3c)); |
| if (enable) { |
| adv7511_check_monitor_present_status(sd); |
| } else { |
| adv7511_s_power(sd, 0); |
| state->have_monitor = false; |
| } |
| return 0; |
| } |
| |
| static int adv7511_s_dv_timings(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings *timings) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| struct v4l2_bt_timings *bt = &timings->bt; |
| u32 fps; |
| |
| v4l2_dbg(1, debug, sd, "%s:\n", __func__); |
| |
| /* quick sanity check */ |
| if (!v4l2_valid_dv_timings(timings, &adv7511_timings_cap, NULL, NULL)) |
| return -EINVAL; |
| |
| /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings |
| if the format is one of the CEA or DMT timings. */ |
| v4l2_find_dv_timings_cap(timings, &adv7511_timings_cap, 0, NULL, NULL); |
| |
| /* save timings */ |
| state->dv_timings = *timings; |
| |
| /* set h/vsync polarities */ |
| adv7511_wr_and_or(sd, 0x17, 0x9f, |
| ((bt->polarities & V4L2_DV_VSYNC_POS_POL) ? 0 : 0x40) | |
| ((bt->polarities & V4L2_DV_HSYNC_POS_POL) ? 0 : 0x20)); |
| |
| fps = (u32)bt->pixelclock / (V4L2_DV_BT_FRAME_WIDTH(bt) * V4L2_DV_BT_FRAME_HEIGHT(bt)); |
| switch (fps) { |
| case 24: |
| adv7511_wr_and_or(sd, 0xfb, 0xf9, 1 << 1); |
| break; |
| case 25: |
| adv7511_wr_and_or(sd, 0xfb, 0xf9, 2 << 1); |
| break; |
| case 30: |
| adv7511_wr_and_or(sd, 0xfb, 0xf9, 3 << 1); |
| break; |
| default: |
| adv7511_wr_and_or(sd, 0xfb, 0xf9, 0); |
| break; |
| } |
| |
| /* update quantization range based on new dv_timings */ |
| adv7511_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl); |
| |
| return 0; |
| } |
| |
| static int adv7511_g_dv_timings(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings *timings) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| v4l2_dbg(1, debug, sd, "%s:\n", __func__); |
| |
| if (!timings) |
| return -EINVAL; |
| |
| *timings = state->dv_timings; |
| |
| return 0; |
| } |
| |
| static int adv7511_enum_dv_timings(struct v4l2_subdev *sd, |
| struct v4l2_enum_dv_timings *timings) |
| { |
| if (timings->pad != 0) |
| return -EINVAL; |
| |
| return v4l2_enum_dv_timings_cap(timings, &adv7511_timings_cap, NULL, NULL); |
| } |
| |
| static int adv7511_dv_timings_cap(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings_cap *cap) |
| { |
| if (cap->pad != 0) |
| return -EINVAL; |
| |
| *cap = adv7511_timings_cap; |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_video_ops adv7511_video_ops = { |
| .s_stream = adv7511_s_stream, |
| .s_dv_timings = adv7511_s_dv_timings, |
| .g_dv_timings = adv7511_g_dv_timings, |
| }; |
| |
| /* ------------------------------ AUDIO OPS ------------------------------ */ |
| static int adv7511_s_audio_stream(struct v4l2_subdev *sd, int enable) |
| { |
| v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); |
| |
| if (enable) |
| adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x80); |
| else |
| adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x40); |
| |
| return 0; |
| } |
| |
| static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq) |
| { |
| u32 N; |
| |
| switch (freq) { |
| case 32000: N = 4096; break; |
| case 44100: N = 6272; break; |
| case 48000: N = 6144; break; |
| case 88200: N = 12544; break; |
| case 96000: N = 12288; break; |
| case 176400: N = 25088; break; |
| case 192000: N = 24576; break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Set N (used with CTS to regenerate the audio clock) */ |
| adv7511_wr(sd, 0x01, (N >> 16) & 0xf); |
| adv7511_wr(sd, 0x02, (N >> 8) & 0xff); |
| adv7511_wr(sd, 0x03, N & 0xff); |
| |
| return 0; |
| } |
| |
| static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq) |
| { |
| u32 i2s_sf; |
| |
| switch (freq) { |
| case 32000: i2s_sf = 0x30; break; |
| case 44100: i2s_sf = 0x00; break; |
| case 48000: i2s_sf = 0x20; break; |
| case 88200: i2s_sf = 0x80; break; |
| case 96000: i2s_sf = 0xa0; break; |
| case 176400: i2s_sf = 0xc0; break; |
| case 192000: i2s_sf = 0xe0; break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Set sampling frequency for I2S audio to 48 kHz */ |
| adv7511_wr_and_or(sd, 0x15, 0xf, i2s_sf); |
| |
| return 0; |
| } |
| |
| static int adv7511_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config) |
| { |
| /* Only 2 channels in use for application */ |
| adv7511_wr_and_or(sd, 0x73, 0xf8, 0x1); |
| /* Speaker mapping */ |
| adv7511_wr(sd, 0x76, 0x00); |
| |
| /* 16 bit audio word length */ |
| adv7511_wr_and_or(sd, 0x14, 0xf0, 0x02); |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_audio_ops adv7511_audio_ops = { |
| .s_stream = adv7511_s_audio_stream, |
| .s_clock_freq = adv7511_s_clock_freq, |
| .s_i2s_clock_freq = adv7511_s_i2s_clock_freq, |
| .s_routing = adv7511_s_routing, |
| }; |
| |
| /* ---------------------------- PAD OPS ------------------------------------- */ |
| |
| static int adv7511_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| memset(edid->reserved, 0, sizeof(edid->reserved)); |
| |
| if (edid->pad != 0) |
| return -EINVAL; |
| |
| if (edid->start_block == 0 && edid->blocks == 0) { |
| edid->blocks = state->edid.segments * 2; |
| return 0; |
| } |
| |
| if (state->edid.segments == 0) |
| return -ENODATA; |
| |
| if (edid->start_block >= state->edid.segments * 2) |
| return -EINVAL; |
| |
| if (edid->start_block + edid->blocks > state->edid.segments * 2) |
| edid->blocks = state->edid.segments * 2 - edid->start_block; |
| |
| memcpy(edid->edid, &state->edid.data[edid->start_block * 128], |
| 128 * edid->blocks); |
| |
| return 0; |
| } |
| |
| static int adv7511_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->pad != 0) |
| return -EINVAL; |
| |
| switch (code->index) { |
| case 0: |
| code->code = MEDIA_BUS_FMT_RGB888_1X24; |
| break; |
| case 1: |
| code->code = MEDIA_BUS_FMT_YUYV8_1X16; |
| break; |
| case 2: |
| code->code = MEDIA_BUS_FMT_UYVY8_1X16; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static void adv7511_fill_format(struct adv7511_state *state, |
| struct v4l2_mbus_framefmt *format) |
| { |
| format->width = state->dv_timings.bt.width; |
| format->height = state->dv_timings.bt.height; |
| format->field = V4L2_FIELD_NONE; |
| } |
| |
| static int adv7511_get_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *format) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| if (format->pad != 0) |
| return -EINVAL; |
| |
| memset(&format->format, 0, sizeof(format->format)); |
| adv7511_fill_format(state, &format->format); |
| |
| if (format->which == V4L2_SUBDEV_FORMAT_TRY) { |
| struct v4l2_mbus_framefmt *fmt; |
| |
| fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad); |
| format->format.code = fmt->code; |
| format->format.colorspace = fmt->colorspace; |
| format->format.ycbcr_enc = fmt->ycbcr_enc; |
| format->format.quantization = fmt->quantization; |
| format->format.xfer_func = fmt->xfer_func; |
| } else { |
| format->format.code = state->fmt_code; |
| format->format.colorspace = state->colorspace; |
| format->format.ycbcr_enc = state->ycbcr_enc; |
| format->format.quantization = state->quantization; |
| format->format.xfer_func = state->xfer_func; |
| } |
| |
| return 0; |
| } |
| |
| static int adv7511_set_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *format) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| /* |
| * Bitfield namings come the CEA-861-F standard, table 8 "Auxiliary |
| * Video Information (AVI) InfoFrame Format" |
| * |
| * c = Colorimetry |
| * ec = Extended Colorimetry |
| * y = RGB or YCbCr |
| * q = RGB Quantization Range |
| * yq = YCC Quantization Range |
| */ |
| u8 c = HDMI_COLORIMETRY_NONE; |
| u8 ec = HDMI_EXTENDED_COLORIMETRY_XV_YCC_601; |
| u8 y = HDMI_COLORSPACE_RGB; |
| u8 q = HDMI_QUANTIZATION_RANGE_DEFAULT; |
| u8 yq = HDMI_YCC_QUANTIZATION_RANGE_LIMITED; |
| u8 itc = state->content_type != V4L2_DV_IT_CONTENT_TYPE_NO_ITC; |
| u8 cn = itc ? state->content_type : V4L2_DV_IT_CONTENT_TYPE_GRAPHICS; |
| |
| if (format->pad != 0) |
| return -EINVAL; |
| switch (format->format.code) { |
| case MEDIA_BUS_FMT_UYVY8_1X16: |
| case MEDIA_BUS_FMT_YUYV8_1X16: |
| case MEDIA_BUS_FMT_RGB888_1X24: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| adv7511_fill_format(state, &format->format); |
| if (format->which == V4L2_SUBDEV_FORMAT_TRY) { |
| struct v4l2_mbus_framefmt *fmt; |
| |
| fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad); |
| fmt->code = format->format.code; |
| fmt->colorspace = format->format.colorspace; |
| fmt->ycbcr_enc = format->format.ycbcr_enc; |
| fmt->quantization = format->format.quantization; |
| fmt->xfer_func = format->format.xfer_func; |
| return 0; |
| } |
| |
| switch (format->format.code) { |
| case MEDIA_BUS_FMT_UYVY8_1X16: |
| adv7511_wr_and_or(sd, 0x15, 0xf0, 0x01); |
| adv7511_wr_and_or(sd, 0x16, 0x03, 0xb8); |
| y = HDMI_COLORSPACE_YUV422; |
| break; |
| case MEDIA_BUS_FMT_YUYV8_1X16: |
| adv7511_wr_and_or(sd, 0x15, 0xf0, 0x01); |
| adv7511_wr_and_or(sd, 0x16, 0x03, 0xbc); |
| y = HDMI_COLORSPACE_YUV422; |
| break; |
| case MEDIA_BUS_FMT_RGB888_1X24: |
| default: |
| adv7511_wr_and_or(sd, 0x15, 0xf0, 0x00); |
| adv7511_wr_and_or(sd, 0x16, 0x03, 0x00); |
| break; |
| } |
| state->fmt_code = format->format.code; |
| state->colorspace = format->format.colorspace; |
| state->ycbcr_enc = format->format.ycbcr_enc; |
| state->quantization = format->format.quantization; |
| state->xfer_func = format->format.xfer_func; |
| |
| switch (format->format.colorspace) { |
| case V4L2_COLORSPACE_OPRGB: |
| c = HDMI_COLORIMETRY_EXTENDED; |
| ec = y ? HDMI_EXTENDED_COLORIMETRY_OPYCC_601 : |
| HDMI_EXTENDED_COLORIMETRY_OPRGB; |
| break; |
| case V4L2_COLORSPACE_SMPTE170M: |
| c = y ? HDMI_COLORIMETRY_ITU_601 : HDMI_COLORIMETRY_NONE; |
| if (y && format->format.ycbcr_enc == V4L2_YCBCR_ENC_XV601) { |
| c = HDMI_COLORIMETRY_EXTENDED; |
| ec = HDMI_EXTENDED_COLORIMETRY_XV_YCC_601; |
| } |
| break; |
| case V4L2_COLORSPACE_REC709: |
| c = y ? HDMI_COLORIMETRY_ITU_709 : HDMI_COLORIMETRY_NONE; |
| if (y && format->format.ycbcr_enc == V4L2_YCBCR_ENC_XV709) { |
| c = HDMI_COLORIMETRY_EXTENDED; |
| ec = HDMI_EXTENDED_COLORIMETRY_XV_YCC_709; |
| } |
| break; |
| case V4L2_COLORSPACE_SRGB: |
| c = y ? HDMI_COLORIMETRY_EXTENDED : HDMI_COLORIMETRY_NONE; |
| ec = y ? HDMI_EXTENDED_COLORIMETRY_S_YCC_601 : |
| HDMI_EXTENDED_COLORIMETRY_XV_YCC_601; |
| break; |
| case V4L2_COLORSPACE_BT2020: |
| c = HDMI_COLORIMETRY_EXTENDED; |
| if (y && format->format.ycbcr_enc == V4L2_YCBCR_ENC_BT2020_CONST_LUM) |
| ec = 5; /* Not yet available in hdmi.h */ |
| else |
| ec = 6; /* Not yet available in hdmi.h */ |
| break; |
| default: |
| break; |
| } |
| |
| /* |
| * CEA-861-F says that for RGB formats the YCC range must match the |
| * RGB range, although sources should ignore the YCC range. |
| * |
| * The RGB quantization range shouldn't be non-zero if the EDID doesn't |
| * have the Q bit set in the Video Capabilities Data Block, however this |
| * isn't checked at the moment. The assumption is that the application |
| * knows the EDID and can detect this. |
| * |
| * The same is true for the YCC quantization range: non-standard YCC |
| * quantization ranges should only be sent if the EDID has the YQ bit |
| * set in the Video Capabilities Data Block. |
| */ |
| switch (format->format.quantization) { |
| case V4L2_QUANTIZATION_FULL_RANGE: |
| q = y ? HDMI_QUANTIZATION_RANGE_DEFAULT : |
| HDMI_QUANTIZATION_RANGE_FULL; |
| yq = q ? q - 1 : HDMI_YCC_QUANTIZATION_RANGE_FULL; |
| break; |
| case V4L2_QUANTIZATION_LIM_RANGE: |
| q = y ? HDMI_QUANTIZATION_RANGE_DEFAULT : |
| HDMI_QUANTIZATION_RANGE_LIMITED; |
| yq = q ? q - 1 : HDMI_YCC_QUANTIZATION_RANGE_LIMITED; |
| break; |
| } |
| |
| adv7511_wr_and_or(sd, 0x4a, 0xbf, 0); |
| adv7511_wr_and_or(sd, 0x55, 0x9f, y << 5); |
| adv7511_wr_and_or(sd, 0x56, 0x3f, c << 6); |
| adv7511_wr_and_or(sd, 0x57, 0x83, (ec << 4) | (q << 2) | (itc << 7)); |
| adv7511_wr_and_or(sd, 0x59, 0x0f, (yq << 6) | (cn << 4)); |
| adv7511_wr_and_or(sd, 0x4a, 0xff, 1); |
| adv7511_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl); |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_pad_ops adv7511_pad_ops = { |
| .get_edid = adv7511_get_edid, |
| .enum_mbus_code = adv7511_enum_mbus_code, |
| .get_fmt = adv7511_get_fmt, |
| .set_fmt = adv7511_set_fmt, |
| .enum_dv_timings = adv7511_enum_dv_timings, |
| .dv_timings_cap = adv7511_dv_timings_cap, |
| }; |
| |
| /* --------------------- SUBDEV OPS --------------------------------------- */ |
| |
| static const struct v4l2_subdev_ops adv7511_ops = { |
| .core = &adv7511_core_ops, |
| .pad = &adv7511_pad_ops, |
| .video = &adv7511_video_ops, |
| .audio = &adv7511_audio_ops, |
| }; |
| |
| /* ----------------------------------------------------------------------- */ |
| static void adv7511_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, int segment, u8 *buf) |
| { |
| if (debug >= lvl) { |
| int i, j; |
| v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment); |
| for (i = 0; i < 256; i += 16) { |
| u8 b[128]; |
| u8 *bp = b; |
| if (i == 128) |
| v4l2_dbg(lvl, debug, sd, "\n"); |
| for (j = i; j < i + 16; j++) { |
| sprintf(bp, "0x%02x, ", buf[j]); |
| bp += 6; |
| } |
| bp[0] = '\0'; |
| v4l2_dbg(lvl, debug, sd, "%s\n", b); |
| } |
| } |
| } |
| |
| static void adv7511_notify_no_edid(struct v4l2_subdev *sd) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| struct adv7511_edid_detect ed; |
| |
| /* We failed to read the EDID, so send an event for this. */ |
| ed.present = false; |
| ed.segment = adv7511_rd(sd, 0xc4); |
| ed.phys_addr = CEC_PHYS_ADDR_INVALID; |
| cec_s_phys_addr(state->cec_adap, ed.phys_addr, false); |
| v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed); |
| v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x0); |
| } |
| |
| static void adv7511_edid_handler(struct work_struct *work) |
| { |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct adv7511_state *state = container_of(dwork, struct adv7511_state, edid_handler); |
| struct v4l2_subdev *sd = &state->sd; |
| |
| v4l2_dbg(1, debug, sd, "%s:\n", __func__); |
| |
| if (adv7511_check_edid_status(sd)) { |
| /* Return if we received the EDID. */ |
| return; |
| } |
| |
| if (adv7511_have_hotplug(sd)) { |
| /* We must retry reading the EDID several times, it is possible |
| * that initially the EDID couldn't be read due to i2c errors |
| * (DVI connectors are particularly prone to this problem). */ |
| if (state->edid.read_retries) { |
| state->edid.read_retries--; |
| v4l2_dbg(1, debug, sd, "%s: edid read failed\n", __func__); |
| state->have_monitor = false; |
| adv7511_s_power(sd, false); |
| adv7511_s_power(sd, true); |
| queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY); |
| return; |
| } |
| } |
| |
| /* We failed to read the EDID, so send an event for this. */ |
| adv7511_notify_no_edid(sd); |
| v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__); |
| } |
| |
| static void adv7511_audio_setup(struct v4l2_subdev *sd) |
| { |
| v4l2_dbg(1, debug, sd, "%s\n", __func__); |
| |
| adv7511_s_i2s_clock_freq(sd, 48000); |
| adv7511_s_clock_freq(sd, 48000); |
| adv7511_s_routing(sd, 0, 0, 0); |
| } |
| |
| /* Configure hdmi transmitter. */ |
| static void adv7511_setup(struct v4l2_subdev *sd) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| v4l2_dbg(1, debug, sd, "%s\n", __func__); |
| |
| /* Input format: RGB 4:4:4 */ |
| adv7511_wr_and_or(sd, 0x15, 0xf0, 0x0); |
| /* Output format: RGB 4:4:4 */ |
| adv7511_wr_and_or(sd, 0x16, 0x7f, 0x0); |
| /* 1st order interpolation 4:2:2 -> 4:4:4 up conversion, Aspect ratio: 16:9 */ |
| adv7511_wr_and_or(sd, 0x17, 0xf9, 0x06); |
| /* Disable pixel repetition */ |
| adv7511_wr_and_or(sd, 0x3b, 0x9f, 0x0); |
| /* Disable CSC */ |
| adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0); |
| /* Output format: RGB 4:4:4, Active Format Information is valid, |
| * underscanned */ |
| adv7511_wr_and_or(sd, 0x55, 0x9c, 0x12); |
| /* AVI Info frame packet enable, Audio Info frame disable */ |
| adv7511_wr_and_or(sd, 0x44, 0xe7, 0x10); |
| /* Colorimetry, Active format aspect ratio: same as picure. */ |
| adv7511_wr(sd, 0x56, 0xa8); |
| /* No encryption */ |
| adv7511_wr_and_or(sd, 0xaf, 0xed, 0x0); |
| |
| /* Positive clk edge capture for input video clock */ |
| adv7511_wr_and_or(sd, 0xba, 0x1f, 0x60); |
| |
| adv7511_audio_setup(sd); |
| |
| v4l2_ctrl_handler_setup(&state->hdl); |
| } |
| |
| static void adv7511_notify_monitor_detect(struct v4l2_subdev *sd) |
| { |
| struct adv7511_monitor_detect mdt; |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| mdt.present = state->have_monitor; |
| v4l2_subdev_notify(sd, ADV7511_MONITOR_DETECT, (void *)&mdt); |
| } |
| |
| static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| /* read hotplug and rx-sense state */ |
| u8 status = adv7511_rd(sd, 0x42); |
| |
| v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n", |
| __func__, |
| status, |
| status & MASK_ADV7511_HPD_DETECT ? ", hotplug" : "", |
| status & MASK_ADV7511_MSEN_DETECT ? ", rx-sense" : ""); |
| |
| /* update read only ctrls */ |
| v4l2_ctrl_s_ctrl(state->hotplug_ctrl, adv7511_have_hotplug(sd) ? 0x1 : 0x0); |
| v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, adv7511_have_rx_sense(sd) ? 0x1 : 0x0); |
| |
| if ((status & MASK_ADV7511_HPD_DETECT) && ((status & MASK_ADV7511_MSEN_DETECT) || state->edid.segments)) { |
| v4l2_dbg(1, debug, sd, "%s: hotplug and (rx-sense or edid)\n", __func__); |
| if (!state->have_monitor) { |
| v4l2_dbg(1, debug, sd, "%s: monitor detected\n", __func__); |
| state->have_monitor = true; |
| adv7511_set_isr(sd, true); |
| if (!adv7511_s_power(sd, true)) { |
| v4l2_dbg(1, debug, sd, "%s: monitor detected, powerup failed\n", __func__); |
| return; |
| } |
| adv7511_setup(sd); |
| adv7511_notify_monitor_detect(sd); |
| state->edid.read_retries = EDID_MAX_RETRIES; |
| queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY); |
| } |
| } else if (status & MASK_ADV7511_HPD_DETECT) { |
| v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__); |
| state->edid.read_retries = EDID_MAX_RETRIES; |
| queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY); |
| } else if (!(status & MASK_ADV7511_HPD_DETECT)) { |
| v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__); |
| if (state->have_monitor) { |
| v4l2_dbg(1, debug, sd, "%s: monitor not detected\n", __func__); |
| state->have_monitor = false; |
| adv7511_notify_monitor_detect(sd); |
| } |
| adv7511_s_power(sd, false); |
| memset(&state->edid, 0, sizeof(struct adv7511_state_edid)); |
| adv7511_notify_no_edid(sd); |
| } |
| } |
| |
| static bool edid_block_verify_crc(u8 *edid_block) |
| { |
| u8 sum = 0; |
| int i; |
| |
| for (i = 0; i < 128; i++) |
| sum += edid_block[i]; |
| return sum == 0; |
| } |
| |
| static bool edid_verify_crc(struct v4l2_subdev *sd, u32 segment) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| u32 blocks = state->edid.blocks; |
| u8 *data = state->edid.data; |
| |
| if (!edid_block_verify_crc(&data[segment * 256])) |
| return false; |
| if ((segment + 1) * 2 <= blocks) |
| return edid_block_verify_crc(&data[segment * 256 + 128]); |
| return true; |
| } |
| |
| static bool edid_verify_header(struct v4l2_subdev *sd, u32 segment) |
| { |
| static const u8 hdmi_header[] = { |
| 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 |
| }; |
| struct adv7511_state *state = get_adv7511_state(sd); |
| u8 *data = state->edid.data; |
| |
| if (segment != 0) |
| return true; |
| return !memcmp(data, hdmi_header, sizeof(hdmi_header)); |
| } |
| |
| static bool adv7511_check_edid_status(struct v4l2_subdev *sd) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| u8 edidRdy = adv7511_rd(sd, 0xc5); |
| |
| v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n", |
| __func__, EDID_MAX_RETRIES - state->edid.read_retries); |
| |
| if (state->edid.complete) |
| return true; |
| |
| if (edidRdy & MASK_ADV7511_EDID_RDY) { |
| int segment = adv7511_rd(sd, 0xc4); |
| struct adv7511_edid_detect ed; |
| |
| if (segment >= EDID_MAX_SEGM) { |
| v4l2_err(sd, "edid segment number too big\n"); |
| return false; |
| } |
| v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment); |
| adv7511_edid_rd(sd, 256, &state->edid.data[segment * 256]); |
| adv7511_dbg_dump_edid(2, debug, sd, segment, &state->edid.data[segment * 256]); |
| if (segment == 0) { |
| state->edid.blocks = state->edid.data[0x7e] + 1; |
| v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", __func__, state->edid.blocks); |
| } |
| if (!edid_verify_crc(sd, segment) || |
| !edid_verify_header(sd, segment)) { |
| /* edid crc error, force reread of edid segment */ |
| v4l2_err(sd, "%s: edid crc or header error\n", __func__); |
| state->have_monitor = false; |
| adv7511_s_power(sd, false); |
| adv7511_s_power(sd, true); |
| return false; |
| } |
| /* one more segment read ok */ |
| state->edid.segments = segment + 1; |
| v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x1); |
| if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) { |
| /* Request next EDID segment */ |
| v4l2_dbg(1, debug, sd, "%s: request segment %d\n", __func__, state->edid.segments); |
| adv7511_wr(sd, 0xc9, 0xf); |
| adv7511_wr(sd, 0xc4, state->edid.segments); |
| state->edid.read_retries = EDID_MAX_RETRIES; |
| queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY); |
| return false; |
| } |
| |
| v4l2_dbg(1, debug, sd, "%s: edid complete with %d segment(s)\n", __func__, state->edid.segments); |
| state->edid.complete = true; |
| ed.phys_addr = cec_get_edid_phys_addr(state->edid.data, |
| state->edid.segments * 256, |
| NULL); |
| /* report when we have all segments |
| but report only for segment 0 |
| */ |
| ed.present = true; |
| ed.segment = 0; |
| state->edid_detect_counter++; |
| cec_s_phys_addr(state->cec_adap, ed.phys_addr, false); |
| v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed); |
| return ed.present; |
| } |
| |
| return false; |
| } |
| |
| static int adv7511_registered(struct v4l2_subdev *sd) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int err; |
| |
| err = cec_register_adapter(state->cec_adap, &client->dev); |
| if (err) |
| cec_delete_adapter(state->cec_adap); |
| return err; |
| } |
| |
| static void adv7511_unregistered(struct v4l2_subdev *sd) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| cec_unregister_adapter(state->cec_adap); |
| } |
| |
| static const struct v4l2_subdev_internal_ops adv7511_int_ops = { |
| .registered = adv7511_registered, |
| .unregistered = adv7511_unregistered, |
| }; |
| |
| /* ----------------------------------------------------------------------- */ |
| /* Setup ADV7511 */ |
| static void adv7511_init_setup(struct v4l2_subdev *sd) |
| { |
| struct adv7511_state *state = get_adv7511_state(sd); |
| struct adv7511_state_edid *edid = &state->edid; |
| u32 cec_clk = state->pdata.cec_clk; |
| u8 ratio; |
| |
| v4l2_dbg(1, debug, sd, "%s\n", __func__); |
| |
| /* clear all interrupts */ |
| adv7511_wr(sd, 0x96, 0xff); |
| adv7511_wr(sd, 0x97, 0xff); |
| /* |
| * Stop HPD from resetting a lot of registers. |
| * It might leave the chip in a partly un-initialized state, |
| * in particular with regards to hotplug bounces. |
| */ |
| adv7511_wr_and_or(sd, 0xd6, 0x3f, 0xc0); |
| memset(edid, 0, sizeof(struct adv7511_state_edid)); |
| state->have_monitor = false; |
| adv7511_set_isr(sd, false); |
| adv7511_s_stream(sd, false); |
| adv7511_s_audio_stream(sd, false); |
| |
| if (state->i2c_cec == NULL) |
| return; |
| |
| v4l2_dbg(1, debug, sd, "%s: cec_clk %d\n", __func__, cec_clk); |
| |
| /* cec soft reset */ |
| adv7511_cec_write(sd, 0x50, 0x01); |
| adv7511_cec_write(sd, 0x50, 0x00); |
| |
| /* legacy mode */ |
| adv7511_cec_write(sd, 0x4a, 0x00); |
| adv7511_cec_write(sd, 0x4a, 0x07); |
| |
| if (cec_clk % 750000 != 0) |
| v4l2_err(sd, "%s: cec_clk %d, not multiple of 750 Khz\n", |
| __func__, cec_clk); |
| |
| ratio = (cec_clk / 750000) - 1; |
| adv7511_cec_write(sd, 0x4e, ratio << 2); |
| } |
| |
| static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *id) |
| { |
| struct adv7511_state *state; |
| struct adv7511_platform_data *pdata = client->dev.platform_data; |
| struct v4l2_ctrl_handler *hdl; |
| struct v4l2_subdev *sd; |
| u8 chip_id[2]; |
| int err = -EIO; |
| |
| /* Check if the adapter supports the needed features */ |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -EIO; |
| |
| state = devm_kzalloc(&client->dev, sizeof(struct adv7511_state), GFP_KERNEL); |
| if (!state) |
| return -ENOMEM; |
| |
| /* Platform data */ |
| if (!pdata) { |
| v4l_err(client, "No platform data!\n"); |
| return -ENODEV; |
| } |
| memcpy(&state->pdata, pdata, sizeof(state->pdata)); |
| state->fmt_code = MEDIA_BUS_FMT_RGB888_1X24; |
| state->colorspace = V4L2_COLORSPACE_SRGB; |
| |
| sd = &state->sd; |
| |
| v4l2_dbg(1, debug, sd, "detecting adv7511 client on address 0x%x\n", |
| client->addr << 1); |
| |
| v4l2_i2c_subdev_init(sd, client, &adv7511_ops); |
| sd->internal_ops = &adv7511_int_ops; |
| |
| hdl = &state->hdl; |
| v4l2_ctrl_handler_init(hdl, 10); |
| /* add in ascending ID order */ |
| state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops, |
| V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI, |
| 0, V4L2_DV_TX_MODE_DVI_D); |
| state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL, |
| V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0); |
| state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL, |
| V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0); |
| state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL, |
| V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0); |
| state->rgb_quantization_range_ctrl = |
| v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops, |
| V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, |
| 0, V4L2_DV_RGB_RANGE_AUTO); |
| state->content_type_ctrl = |
| v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops, |
| V4L2_CID_DV_TX_IT_CONTENT_TYPE, V4L2_DV_IT_CONTENT_TYPE_NO_ITC, |
| 0, V4L2_DV_IT_CONTENT_TYPE_NO_ITC); |
| sd->ctrl_handler = hdl; |
| if (hdl->error) { |
| err = hdl->error; |
| goto err_hdl; |
| } |
| state->pad.flags = MEDIA_PAD_FL_SINK; |
| sd->entity.function = MEDIA_ENT_F_DV_ENCODER; |
| err = media_entity_pads_init(&sd->entity, 1, &state->pad); |
| if (err) |
| goto err_hdl; |
| |
| /* EDID and CEC i2c addr */ |
| state->i2c_edid_addr = state->pdata.i2c_edid << 1; |
| state->i2c_cec_addr = state->pdata.i2c_cec << 1; |
| state->i2c_pktmem_addr = state->pdata.i2c_pktmem << 1; |
| |
| state->chip_revision = adv7511_rd(sd, 0x0); |
| chip_id[0] = adv7511_rd(sd, 0xf5); |
| chip_id[1] = adv7511_rd(sd, 0xf6); |
| if (chip_id[0] != 0x75 || chip_id[1] != 0x11) { |
| v4l2_err(sd, "chip_id != 0x7511, read 0x%02x%02x\n", chip_id[0], |
| chip_id[1]); |
| err = -EIO; |
| goto err_entity; |
| } |
| |
| state->i2c_edid = i2c_new_dummy_device(client->adapter, |
| state->i2c_edid_addr >> 1); |
| if (IS_ERR(state->i2c_edid)) { |
| v4l2_err(sd, "failed to register edid i2c client\n"); |
| err = PTR_ERR(state->i2c_edid); |
| goto err_entity; |
| } |
| |
| adv7511_wr(sd, 0xe1, state->i2c_cec_addr); |
| if (state->pdata.cec_clk < 3000000 || |
| state->pdata.cec_clk > 100000000) { |
| v4l2_err(sd, "%s: cec_clk %u outside range, disabling cec\n", |
| __func__, state->pdata.cec_clk); |
| state->pdata.cec_clk = 0; |
| } |
| |
| if (state->pdata.cec_clk) { |
| state->i2c_cec = i2c_new_dummy_device(client->adapter, |
| state->i2c_cec_addr >> 1); |
| if (IS_ERR(state->i2c_cec)) { |
| v4l2_err(sd, "failed to register cec i2c client\n"); |
| err = PTR_ERR(state->i2c_cec); |
| goto err_unreg_edid; |
| } |
| adv7511_wr(sd, 0xe2, 0x00); /* power up cec section */ |
| } else { |
| adv7511_wr(sd, 0xe2, 0x01); /* power down cec section */ |
| } |
| |
| state->i2c_pktmem = i2c_new_dummy_device(client->adapter, state->i2c_pktmem_addr >> 1); |
| if (IS_ERR(state->i2c_pktmem)) { |
| v4l2_err(sd, "failed to register pktmem i2c client\n"); |
| err = PTR_ERR(state->i2c_pktmem); |
| goto err_unreg_cec; |
| } |
| |
| state->work_queue = create_singlethread_workqueue(sd->name); |
| if (state->work_queue == NULL) { |
| v4l2_err(sd, "could not create workqueue\n"); |
| err = -ENOMEM; |
| goto err_unreg_pktmem; |
| } |
| |
| INIT_DELAYED_WORK(&state->edid_handler, adv7511_edid_handler); |
| |
| adv7511_init_setup(sd); |
| |
| #if IS_ENABLED(CONFIG_VIDEO_ADV7511_CEC) |
| state->cec_adap = cec_allocate_adapter(&adv7511_cec_adap_ops, |
| state, dev_name(&client->dev), CEC_CAP_DEFAULTS, |
| ADV7511_MAX_ADDRS); |
| err = PTR_ERR_OR_ZERO(state->cec_adap); |
| if (err) { |
| destroy_workqueue(state->work_queue); |
| goto err_unreg_pktmem; |
| } |
| #endif |
| |
| adv7511_set_isr(sd, true); |
| adv7511_check_monitor_present_status(sd); |
| |
| v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, |
| client->addr << 1, client->adapter->name); |
| return 0; |
| |
| err_unreg_pktmem: |
| i2c_unregister_device(state->i2c_pktmem); |
| err_unreg_cec: |
| i2c_unregister_device(state->i2c_cec); |
| err_unreg_edid: |
| i2c_unregister_device(state->i2c_edid); |
| err_entity: |
| media_entity_cleanup(&sd->entity); |
| err_hdl: |
| v4l2_ctrl_handler_free(&state->hdl); |
| return err; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static int adv7511_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct adv7511_state *state = get_adv7511_state(sd); |
| |
| state->chip_revision = -1; |
| |
| v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name, |
| client->addr << 1, client->adapter->name); |
| |
| adv7511_set_isr(sd, false); |
| adv7511_init_setup(sd); |
| cancel_delayed_work(&state->edid_handler); |
| i2c_unregister_device(state->i2c_edid); |
| i2c_unregister_device(state->i2c_cec); |
| i2c_unregister_device(state->i2c_pktmem); |
| destroy_workqueue(state->work_queue); |
| v4l2_device_unregister_subdev(sd); |
| media_entity_cleanup(&sd->entity); |
| v4l2_ctrl_handler_free(sd->ctrl_handler); |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static const struct i2c_device_id adv7511_id[] = { |
| { "adv7511-v4l2", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, adv7511_id); |
| |
| static struct i2c_driver adv7511_driver = { |
| .driver = { |
| .name = "adv7511-v4l2", |
| }, |
| .probe = adv7511_probe, |
| .remove = adv7511_remove, |
| .id_table = adv7511_id, |
| }; |
| |
| module_i2c_driver(adv7511_driver); |