| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * UIO driver fo Humusoft MF624 DAQ card. |
| * Copyright (C) 2011 Rostislav Lisovy <lisovy@gmail.com>, |
| * Czech Technical University in Prague |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/uio_driver.h> |
| |
| #define PCI_VENDOR_ID_HUMUSOFT 0x186c |
| #define PCI_DEVICE_ID_MF624 0x0624 |
| #define PCI_SUBVENDOR_ID_HUMUSOFT 0x186c |
| #define PCI_SUBDEVICE_DEVICE 0x0624 |
| |
| /* BAR0 Interrupt control/status register */ |
| #define INTCSR 0x4C |
| #define INTCSR_ADINT_ENABLE (1 << 0) |
| #define INTCSR_CTR4INT_ENABLE (1 << 3) |
| #define INTCSR_PCIINT_ENABLE (1 << 6) |
| #define INTCSR_ADINT_STATUS (1 << 2) |
| #define INTCSR_CTR4INT_STATUS (1 << 5) |
| |
| enum mf624_interrupt_source {ADC, CTR4, ALL}; |
| |
| static void mf624_disable_interrupt(enum mf624_interrupt_source source, |
| struct uio_info *info) |
| { |
| void __iomem *INTCSR_reg = info->mem[0].internal_addr + INTCSR; |
| |
| switch (source) { |
| case ADC: |
| iowrite32(ioread32(INTCSR_reg) |
| & ~(INTCSR_ADINT_ENABLE | INTCSR_PCIINT_ENABLE), |
| INTCSR_reg); |
| break; |
| |
| case CTR4: |
| iowrite32(ioread32(INTCSR_reg) |
| & ~(INTCSR_CTR4INT_ENABLE | INTCSR_PCIINT_ENABLE), |
| INTCSR_reg); |
| break; |
| |
| case ALL: |
| default: |
| iowrite32(ioread32(INTCSR_reg) |
| & ~(INTCSR_ADINT_ENABLE | INTCSR_CTR4INT_ENABLE |
| | INTCSR_PCIINT_ENABLE), |
| INTCSR_reg); |
| break; |
| } |
| } |
| |
| static void mf624_enable_interrupt(enum mf624_interrupt_source source, |
| struct uio_info *info) |
| { |
| void __iomem *INTCSR_reg = info->mem[0].internal_addr + INTCSR; |
| |
| switch (source) { |
| case ADC: |
| iowrite32(ioread32(INTCSR_reg) |
| | INTCSR_ADINT_ENABLE | INTCSR_PCIINT_ENABLE, |
| INTCSR_reg); |
| break; |
| |
| case CTR4: |
| iowrite32(ioread32(INTCSR_reg) |
| | INTCSR_CTR4INT_ENABLE | INTCSR_PCIINT_ENABLE, |
| INTCSR_reg); |
| break; |
| |
| case ALL: |
| default: |
| iowrite32(ioread32(INTCSR_reg) |
| | INTCSR_ADINT_ENABLE | INTCSR_CTR4INT_ENABLE |
| | INTCSR_PCIINT_ENABLE, |
| INTCSR_reg); |
| break; |
| } |
| } |
| |
| static irqreturn_t mf624_irq_handler(int irq, struct uio_info *info) |
| { |
| void __iomem *INTCSR_reg = info->mem[0].internal_addr + INTCSR; |
| |
| if ((ioread32(INTCSR_reg) & INTCSR_ADINT_ENABLE) |
| && (ioread32(INTCSR_reg) & INTCSR_ADINT_STATUS)) { |
| mf624_disable_interrupt(ADC, info); |
| return IRQ_HANDLED; |
| } |
| |
| if ((ioread32(INTCSR_reg) & INTCSR_CTR4INT_ENABLE) |
| && (ioread32(INTCSR_reg) & INTCSR_CTR4INT_STATUS)) { |
| mf624_disable_interrupt(CTR4, info); |
| return IRQ_HANDLED; |
| } |
| |
| return IRQ_NONE; |
| } |
| |
| static int mf624_irqcontrol(struct uio_info *info, s32 irq_on) |
| { |
| if (irq_on == 0) |
| mf624_disable_interrupt(ALL, info); |
| else if (irq_on == 1) |
| mf624_enable_interrupt(ALL, info); |
| |
| return 0; |
| } |
| |
| static int mf624_setup_mem(struct pci_dev *dev, int bar, struct uio_mem *mem, const char *name) |
| { |
| resource_size_t start = pci_resource_start(dev, bar); |
| resource_size_t len = pci_resource_len(dev, bar); |
| |
| mem->name = name; |
| mem->addr = start & PAGE_MASK; |
| mem->offs = start & ~PAGE_MASK; |
| if (!mem->addr) |
| return -ENODEV; |
| mem->size = ((start & ~PAGE_MASK) + len + PAGE_SIZE - 1) & PAGE_MASK; |
| mem->memtype = UIO_MEM_PHYS; |
| mem->internal_addr = pci_ioremap_bar(dev, bar); |
| if (!mem->internal_addr) |
| return -ENODEV; |
| return 0; |
| } |
| |
| static int mf624_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| struct uio_info *info; |
| |
| info = kzalloc(sizeof(struct uio_info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| if (pci_enable_device(dev)) |
| goto out_free; |
| |
| if (pci_request_regions(dev, "mf624")) |
| goto out_disable; |
| |
| info->name = "mf624"; |
| info->version = "0.0.1"; |
| |
| /* Note: Datasheet says device uses BAR0, BAR1, BAR2 -- do not trust it */ |
| |
| /* BAR0 */ |
| if (mf624_setup_mem(dev, 0, &info->mem[0], "PCI chipset, interrupts, status " |
| "bits, special functions")) |
| goto out_release; |
| /* BAR2 */ |
| if (mf624_setup_mem(dev, 2, &info->mem[1], "ADC, DAC, DIO")) |
| goto out_unmap0; |
| |
| /* BAR4 */ |
| if (mf624_setup_mem(dev, 4, &info->mem[2], "Counter/timer chip")) |
| goto out_unmap1; |
| |
| info->irq = dev->irq; |
| info->irq_flags = IRQF_SHARED; |
| info->handler = mf624_irq_handler; |
| |
| info->irqcontrol = mf624_irqcontrol; |
| |
| if (uio_register_device(&dev->dev, info)) |
| goto out_unmap2; |
| |
| pci_set_drvdata(dev, info); |
| |
| return 0; |
| |
| out_unmap2: |
| iounmap(info->mem[2].internal_addr); |
| out_unmap1: |
| iounmap(info->mem[1].internal_addr); |
| out_unmap0: |
| iounmap(info->mem[0].internal_addr); |
| |
| out_release: |
| pci_release_regions(dev); |
| |
| out_disable: |
| pci_disable_device(dev); |
| |
| out_free: |
| kfree(info); |
| return -ENODEV; |
| } |
| |
| static void mf624_pci_remove(struct pci_dev *dev) |
| { |
| struct uio_info *info = pci_get_drvdata(dev); |
| |
| mf624_disable_interrupt(ALL, info); |
| |
| uio_unregister_device(info); |
| pci_release_regions(dev); |
| pci_disable_device(dev); |
| |
| iounmap(info->mem[0].internal_addr); |
| iounmap(info->mem[1].internal_addr); |
| iounmap(info->mem[2].internal_addr); |
| |
| kfree(info); |
| } |
| |
| static const struct pci_device_id mf624_pci_id[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_HUMUSOFT, PCI_DEVICE_ID_MF624) }, |
| { 0, } |
| }; |
| |
| static struct pci_driver mf624_pci_driver = { |
| .name = "mf624", |
| .id_table = mf624_pci_id, |
| .probe = mf624_pci_probe, |
| .remove = mf624_pci_remove, |
| }; |
| MODULE_DEVICE_TABLE(pci, mf624_pci_id); |
| |
| module_pci_driver(mf624_pci_driver); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Rostislav Lisovy <lisovy@gmail.com>"); |