| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * EZ-USB specific functions used by some of the USB to Serial drivers. |
| * |
| * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| #include <linux/firmware.h> |
| #include <linux/ihex.h> |
| #include <linux/usb/ezusb.h> |
| |
| struct ezusb_fx_type { |
| /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ |
| unsigned short cpucs_reg; |
| unsigned short max_internal_adress; |
| }; |
| |
| static const struct ezusb_fx_type ezusb_fx1 = { |
| .cpucs_reg = 0x7F92, |
| .max_internal_adress = 0x1B3F, |
| }; |
| |
| /* Commands for writing to memory */ |
| #define WRITE_INT_RAM 0xA0 |
| #define WRITE_EXT_RAM 0xA3 |
| |
| static int ezusb_writememory(struct usb_device *dev, int address, |
| unsigned char *data, int length, __u8 request) |
| { |
| int result; |
| unsigned char *transfer_buffer; |
| |
| if (!dev) |
| return -ENODEV; |
| |
| transfer_buffer = kmemdup(data, length, GFP_KERNEL); |
| if (!transfer_buffer) { |
| dev_err(&dev->dev, "%s - kmalloc(%d) failed.\n", |
| __func__, length); |
| return -ENOMEM; |
| } |
| result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| address, 0, transfer_buffer, length, 3000); |
| |
| kfree(transfer_buffer); |
| return result; |
| } |
| |
| static int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg, |
| unsigned char reset_bit) |
| { |
| int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM); |
| if (response < 0) |
| dev_err(&dev->dev, "%s-%d failed: %d\n", |
| __func__, reset_bit, response); |
| return response; |
| } |
| |
| int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit) |
| { |
| return ezusb_set_reset(dev, ezusb_fx1.cpucs_reg, reset_bit); |
| } |
| EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset); |
| |
| static int ezusb_ihex_firmware_download(struct usb_device *dev, |
| struct ezusb_fx_type fx, |
| const char *firmware_path) |
| { |
| int ret = -ENOENT; |
| const struct firmware *firmware = NULL; |
| const struct ihex_binrec *record; |
| |
| if (request_ihex_firmware(&firmware, firmware_path, |
| &dev->dev)) { |
| dev_err(&dev->dev, |
| "%s - request \"%s\" failed\n", |
| __func__, firmware_path); |
| goto out; |
| } |
| |
| ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); |
| if (ret < 0) |
| goto out; |
| |
| record = (const struct ihex_binrec *)firmware->data; |
| for (; record; record = ihex_next_binrec(record)) { |
| if (be32_to_cpu(record->addr) > fx.max_internal_adress) { |
| ret = ezusb_writememory(dev, be32_to_cpu(record->addr), |
| (unsigned char *)record->data, |
| be16_to_cpu(record->len), WRITE_EXT_RAM); |
| if (ret < 0) { |
| dev_err(&dev->dev, "%s - ezusb_writememory " |
| "failed writing internal memory " |
| "(%d %04X %p %d)\n", __func__, ret, |
| be32_to_cpu(record->addr), record->data, |
| be16_to_cpu(record->len)); |
| goto out; |
| } |
| } |
| } |
| |
| ret = ezusb_set_reset(dev, fx.cpucs_reg, 1); |
| if (ret < 0) |
| goto out; |
| record = (const struct ihex_binrec *)firmware->data; |
| for (; record; record = ihex_next_binrec(record)) { |
| if (be32_to_cpu(record->addr) <= fx.max_internal_adress) { |
| ret = ezusb_writememory(dev, be32_to_cpu(record->addr), |
| (unsigned char *)record->data, |
| be16_to_cpu(record->len), WRITE_INT_RAM); |
| if (ret < 0) { |
| dev_err(&dev->dev, "%s - ezusb_writememory " |
| "failed writing external memory " |
| "(%d %04X %p %d)\n", __func__, ret, |
| be32_to_cpu(record->addr), record->data, |
| be16_to_cpu(record->len)); |
| goto out; |
| } |
| } |
| } |
| ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); |
| out: |
| release_firmware(firmware); |
| return ret; |
| } |
| |
| int ezusb_fx1_ihex_firmware_download(struct usb_device *dev, |
| const char *firmware_path) |
| { |
| return ezusb_ihex_firmware_download(dev, ezusb_fx1, firmware_path); |
| } |
| EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download); |
| |
| #if 0 |
| /* |
| * Once someone one needs these fx2 functions, uncomment them |
| * and add them to ezusb.h and all should be good. |
| */ |
| static struct ezusb_fx_type ezusb_fx2 = { |
| .cpucs_reg = 0xE600, |
| .max_internal_adress = 0x3FFF, |
| }; |
| |
| int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit) |
| { |
| return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit); |
| } |
| EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset); |
| |
| int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, |
| const char *firmware_path) |
| { |
| return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path); |
| } |
| EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download); |
| #endif |
| |
| MODULE_LICENSE("GPL"); |