| /* |
| * lib/parman.c - Manager for linear priority array areas |
| * Copyright (c) 2017 Mellanox Technologies. All rights reserved. |
| * Copyright (c) 2017 Jiri Pirko <jiri@mellanox.com> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the names of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/export.h> |
| #include <linux/list.h> |
| #include <linux/err.h> |
| #include <linux/parman.h> |
| |
| struct parman_algo { |
| int (*item_add)(struct parman *parman, struct parman_prio *prio, |
| struct parman_item *item); |
| void (*item_remove)(struct parman *parman, struct parman_prio *prio, |
| struct parman_item *item); |
| }; |
| |
| struct parman { |
| const struct parman_ops *ops; |
| void *priv; |
| const struct parman_algo *algo; |
| unsigned long count; |
| unsigned long limit_count; |
| struct list_head prio_list; |
| }; |
| |
| static int parman_enlarge(struct parman *parman) |
| { |
| unsigned long new_count = parman->limit_count + |
| parman->ops->resize_step; |
| int err; |
| |
| err = parman->ops->resize(parman->priv, new_count); |
| if (err) |
| return err; |
| parman->limit_count = new_count; |
| return 0; |
| } |
| |
| static int parman_shrink(struct parman *parman) |
| { |
| unsigned long new_count = parman->limit_count - |
| parman->ops->resize_step; |
| int err; |
| |
| if (new_count < parman->ops->base_count) |
| return 0; |
| err = parman->ops->resize(parman->priv, new_count); |
| if (err) |
| return err; |
| parman->limit_count = new_count; |
| return 0; |
| } |
| |
| static bool parman_prio_used(struct parman_prio *prio) |
| |
| { |
| return !list_empty(&prio->item_list); |
| } |
| |
| static struct parman_item *parman_prio_first_item(struct parman_prio *prio) |
| { |
| return list_first_entry(&prio->item_list, |
| typeof(struct parman_item), list); |
| } |
| |
| static unsigned long parman_prio_first_index(struct parman_prio *prio) |
| { |
| return parman_prio_first_item(prio)->index; |
| } |
| |
| static struct parman_item *parman_prio_last_item(struct parman_prio *prio) |
| { |
| return list_last_entry(&prio->item_list, |
| typeof(struct parman_item), list); |
| } |
| |
| static unsigned long parman_prio_last_index(struct parman_prio *prio) |
| { |
| return parman_prio_last_item(prio)->index; |
| } |
| |
| static unsigned long parman_lsort_new_index_find(struct parman *parman, |
| struct parman_prio *prio) |
| { |
| list_for_each_entry_from_reverse(prio, &parman->prio_list, list) { |
| if (!parman_prio_used(prio)) |
| continue; |
| return parman_prio_last_index(prio) + 1; |
| } |
| return 0; |
| } |
| |
| static void __parman_prio_move(struct parman *parman, struct parman_prio *prio, |
| struct parman_item *item, unsigned long to_index, |
| unsigned long count) |
| { |
| parman->ops->move(parman->priv, item->index, to_index, count); |
| } |
| |
| static void parman_prio_shift_down(struct parman *parman, |
| struct parman_prio *prio) |
| { |
| struct parman_item *item; |
| unsigned long to_index; |
| |
| if (!parman_prio_used(prio)) |
| return; |
| item = parman_prio_first_item(prio); |
| to_index = parman_prio_last_index(prio) + 1; |
| __parman_prio_move(parman, prio, item, to_index, 1); |
| list_move_tail(&item->list, &prio->item_list); |
| item->index = to_index; |
| } |
| |
| static void parman_prio_shift_up(struct parman *parman, |
| struct parman_prio *prio) |
| { |
| struct parman_item *item; |
| unsigned long to_index; |
| |
| if (!parman_prio_used(prio)) |
| return; |
| item = parman_prio_last_item(prio); |
| to_index = parman_prio_first_index(prio) - 1; |
| __parman_prio_move(parman, prio, item, to_index, 1); |
| list_move(&item->list, &prio->item_list); |
| item->index = to_index; |
| } |
| |
| static void parman_prio_item_remove(struct parman *parman, |
| struct parman_prio *prio, |
| struct parman_item *item) |
| { |
| struct parman_item *last_item; |
| unsigned long to_index; |
| |
| last_item = parman_prio_last_item(prio); |
| if (last_item == item) { |
| list_del(&item->list); |
| return; |
| } |
| to_index = item->index; |
| __parman_prio_move(parman, prio, last_item, to_index, 1); |
| list_del(&last_item->list); |
| list_replace(&item->list, &last_item->list); |
| last_item->index = to_index; |
| } |
| |
| static int parman_lsort_item_add(struct parman *parman, |
| struct parman_prio *prio, |
| struct parman_item *item) |
| { |
| struct parman_prio *prio2; |
| unsigned long new_index; |
| int err; |
| |
| if (parman->count + 1 > parman->limit_count) { |
| err = parman_enlarge(parman); |
| if (err) |
| return err; |
| } |
| |
| new_index = parman_lsort_new_index_find(parman, prio); |
| list_for_each_entry_reverse(prio2, &parman->prio_list, list) { |
| if (prio2 == prio) |
| break; |
| parman_prio_shift_down(parman, prio2); |
| } |
| item->index = new_index; |
| list_add_tail(&item->list, &prio->item_list); |
| parman->count++; |
| return 0; |
| } |
| |
| static void parman_lsort_item_remove(struct parman *parman, |
| struct parman_prio *prio, |
| struct parman_item *item) |
| { |
| parman_prio_item_remove(parman, prio, item); |
| list_for_each_entry_continue(prio, &parman->prio_list, list) |
| parman_prio_shift_up(parman, prio); |
| parman->count--; |
| if (parman->limit_count - parman->count >= parman->ops->resize_step) |
| parman_shrink(parman); |
| } |
| |
| static const struct parman_algo parman_lsort = { |
| .item_add = parman_lsort_item_add, |
| .item_remove = parman_lsort_item_remove, |
| }; |
| |
| static const struct parman_algo *parman_algos[] = { |
| &parman_lsort, |
| }; |
| |
| /** |
| * parman_create - creates a new parman instance |
| * @ops: caller-specific callbacks |
| * @priv: pointer to a private data passed to the ops |
| * |
| * Note: all locking must be provided by the caller. |
| * |
| * Each parman instance manages an array area with chunks of entries |
| * with the same priority. Consider following example: |
| * |
| * item 1 with prio 10 |
| * item 2 with prio 10 |
| * item 3 with prio 10 |
| * item 4 with prio 20 |
| * item 5 with prio 20 |
| * item 6 with prio 30 |
| * item 7 with prio 30 |
| * item 8 with prio 30 |
| * |
| * In this example, there are 3 priority chunks. The order of the priorities |
| * matters, however the order of items within a single priority chunk does not |
| * matter. So the same array could be ordered as follows: |
| * |
| * item 2 with prio 10 |
| * item 3 with prio 10 |
| * item 1 with prio 10 |
| * item 5 with prio 20 |
| * item 4 with prio 20 |
| * item 7 with prio 30 |
| * item 8 with prio 30 |
| * item 6 with prio 30 |
| * |
| * The goal of parman is to maintain the priority ordering. The caller |
| * provides @ops with callbacks parman uses to move the items |
| * and resize the array area. |
| * |
| * Returns a pointer to newly created parman instance in case of success, |
| * otherwise it returns NULL. |
| */ |
| struct parman *parman_create(const struct parman_ops *ops, void *priv) |
| { |
| struct parman *parman; |
| |
| parman = kzalloc(sizeof(*parman), GFP_KERNEL); |
| if (!parman) |
| return NULL; |
| INIT_LIST_HEAD(&parman->prio_list); |
| parman->ops = ops; |
| parman->priv = priv; |
| parman->limit_count = ops->base_count; |
| parman->algo = parman_algos[ops->algo]; |
| return parman; |
| } |
| EXPORT_SYMBOL(parman_create); |
| |
| /** |
| * parman_destroy - destroys existing parman instance |
| * @parman: parman instance |
| * |
| * Note: all locking must be provided by the caller. |
| */ |
| void parman_destroy(struct parman *parman) |
| { |
| WARN_ON(!list_empty(&parman->prio_list)); |
| kfree(parman); |
| } |
| EXPORT_SYMBOL(parman_destroy); |
| |
| /** |
| * parman_prio_init - initializes a parman priority chunk |
| * @parman: parman instance |
| * @prio: parman prio structure to be initialized |
| * @prority: desired priority of the chunk |
| * |
| * Note: all locking must be provided by the caller. |
| * |
| * Before caller could add an item with certain priority, he has to |
| * initialize a priority chunk for it using this function. |
| */ |
| void parman_prio_init(struct parman *parman, struct parman_prio *prio, |
| unsigned long priority) |
| { |
| struct parman_prio *prio2; |
| struct list_head *pos; |
| |
| INIT_LIST_HEAD(&prio->item_list); |
| prio->priority = priority; |
| |
| /* Position inside the list according to priority */ |
| list_for_each(pos, &parman->prio_list) { |
| prio2 = list_entry(pos, typeof(*prio2), list); |
| if (prio2->priority > prio->priority) |
| break; |
| } |
| list_add_tail(&prio->list, pos); |
| } |
| EXPORT_SYMBOL(parman_prio_init); |
| |
| /** |
| * parman_prio_fini - finalizes use of parman priority chunk |
| * @prio: parman prio structure |
| * |
| * Note: all locking must be provided by the caller. |
| */ |
| void parman_prio_fini(struct parman_prio *prio) |
| { |
| WARN_ON(parman_prio_used(prio)); |
| list_del(&prio->list); |
| } |
| EXPORT_SYMBOL(parman_prio_fini); |
| |
| /** |
| * parman_item_add - adds a parman item under defined priority |
| * @parman: parman instance |
| * @prio: parman prio instance to add the item to |
| * @item: parman item instance |
| * |
| * Note: all locking must be provided by the caller. |
| * |
| * Adds item to a array managed by parman instance under the specified priority. |
| * |
| * Returns 0 in case of success, negative number to indicate an error. |
| */ |
| int parman_item_add(struct parman *parman, struct parman_prio *prio, |
| struct parman_item *item) |
| { |
| return parman->algo->item_add(parman, prio, item); |
| } |
| EXPORT_SYMBOL(parman_item_add); |
| |
| /** |
| * parman_item_del - deletes parman item |
| * @parman: parman instance |
| * @prio: parman prio instance to delete the item from |
| * @item: parman item instance |
| * |
| * Note: all locking must be provided by the caller. |
| */ |
| void parman_item_remove(struct parman *parman, struct parman_prio *prio, |
| struct parman_item *item) |
| { |
| parman->algo->item_remove(parman, prio, item); |
| } |
| EXPORT_SYMBOL(parman_item_remove); |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_AUTHOR("Jiri Pirko <jiri@mellanox.com>"); |
| MODULE_DESCRIPTION("Priority-based array manager"); |