| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * HiSilicon SoC L3C uncore Hardware event counters support |
| * |
| * Copyright (C) 2017 Hisilicon Limited |
| * Author: Anurup M <anurup.m@huawei.com> |
| * Shaokun Zhang <zhangshaokun@hisilicon.com> |
| * |
| * This code is based on the uncore PMUs like arm-cci and arm-ccn. |
| */ |
| #include <linux/acpi.h> |
| #include <linux/bug.h> |
| #include <linux/cpuhotplug.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/list.h> |
| #include <linux/platform_device.h> |
| #include <linux/smp.h> |
| |
| #include "hisi_uncore_pmu.h" |
| |
| /* L3C register definition */ |
| #define L3C_PERF_CTRL 0x0408 |
| #define L3C_INT_MASK 0x0800 |
| #define L3C_INT_STATUS 0x0808 |
| #define L3C_INT_CLEAR 0x080c |
| #define L3C_EVENT_CTRL 0x1c00 |
| #define L3C_EVENT_TYPE0 0x1d00 |
| /* |
| * Each counter is 48-bits and [48:63] are reserved |
| * which are Read-As-Zero and Writes-Ignored. |
| */ |
| #define L3C_CNTR0_LOWER 0x1e00 |
| |
| /* L3C has 8-counters */ |
| #define L3C_NR_COUNTERS 0x8 |
| |
| #define L3C_PERF_CTRL_EN 0x20000 |
| #define L3C_EVTYPE_NONE 0xff |
| |
| /* |
| * Select the counter register offset using the counter index |
| */ |
| static u32 hisi_l3c_pmu_get_counter_offset(int cntr_idx) |
| { |
| return (L3C_CNTR0_LOWER + (cntr_idx * 8)); |
| } |
| |
| static u64 hisi_l3c_pmu_read_counter(struct hisi_pmu *l3c_pmu, |
| struct hw_perf_event *hwc) |
| { |
| u32 idx = hwc->idx; |
| |
| if (!hisi_uncore_pmu_counter_valid(l3c_pmu, idx)) { |
| dev_err(l3c_pmu->dev, "Unsupported event index:%d!\n", idx); |
| return 0; |
| } |
| |
| /* Read 64-bits and the upper 16 bits are RAZ */ |
| return readq(l3c_pmu->base + hisi_l3c_pmu_get_counter_offset(idx)); |
| } |
| |
| static void hisi_l3c_pmu_write_counter(struct hisi_pmu *l3c_pmu, |
| struct hw_perf_event *hwc, u64 val) |
| { |
| u32 idx = hwc->idx; |
| |
| if (!hisi_uncore_pmu_counter_valid(l3c_pmu, idx)) { |
| dev_err(l3c_pmu->dev, "Unsupported event index:%d!\n", idx); |
| return; |
| } |
| |
| /* Write 64-bits and the upper 16 bits are WI */ |
| writeq(val, l3c_pmu->base + hisi_l3c_pmu_get_counter_offset(idx)); |
| } |
| |
| static void hisi_l3c_pmu_write_evtype(struct hisi_pmu *l3c_pmu, int idx, |
| u32 type) |
| { |
| u32 reg, reg_idx, shift, val; |
| |
| /* |
| * Select the appropriate event select register(L3C_EVENT_TYPE0/1). |
| * There are 2 event select registers for the 8 hardware counters. |
| * Event code is 8-bits and for the former 4 hardware counters, |
| * L3C_EVENT_TYPE0 is chosen. For the latter 4 hardware counters, |
| * L3C_EVENT_TYPE1 is chosen. |
| */ |
| reg = L3C_EVENT_TYPE0 + (idx / 4) * 4; |
| reg_idx = idx % 4; |
| shift = 8 * reg_idx; |
| |
| /* Write event code to L3C_EVENT_TYPEx Register */ |
| val = readl(l3c_pmu->base + reg); |
| val &= ~(L3C_EVTYPE_NONE << shift); |
| val |= (type << shift); |
| writel(val, l3c_pmu->base + reg); |
| } |
| |
| static void hisi_l3c_pmu_start_counters(struct hisi_pmu *l3c_pmu) |
| { |
| u32 val; |
| |
| /* |
| * Set perf_enable bit in L3C_PERF_CTRL register to start counting |
| * for all enabled counters. |
| */ |
| val = readl(l3c_pmu->base + L3C_PERF_CTRL); |
| val |= L3C_PERF_CTRL_EN; |
| writel(val, l3c_pmu->base + L3C_PERF_CTRL); |
| } |
| |
| static void hisi_l3c_pmu_stop_counters(struct hisi_pmu *l3c_pmu) |
| { |
| u32 val; |
| |
| /* |
| * Clear perf_enable bit in L3C_PERF_CTRL register to stop counting |
| * for all enabled counters. |
| */ |
| val = readl(l3c_pmu->base + L3C_PERF_CTRL); |
| val &= ~(L3C_PERF_CTRL_EN); |
| writel(val, l3c_pmu->base + L3C_PERF_CTRL); |
| } |
| |
| static void hisi_l3c_pmu_enable_counter(struct hisi_pmu *l3c_pmu, |
| struct hw_perf_event *hwc) |
| { |
| u32 val; |
| |
| /* Enable counter index in L3C_EVENT_CTRL register */ |
| val = readl(l3c_pmu->base + L3C_EVENT_CTRL); |
| val |= (1 << hwc->idx); |
| writel(val, l3c_pmu->base + L3C_EVENT_CTRL); |
| } |
| |
| static void hisi_l3c_pmu_disable_counter(struct hisi_pmu *l3c_pmu, |
| struct hw_perf_event *hwc) |
| { |
| u32 val; |
| |
| /* Clear counter index in L3C_EVENT_CTRL register */ |
| val = readl(l3c_pmu->base + L3C_EVENT_CTRL); |
| val &= ~(1 << hwc->idx); |
| writel(val, l3c_pmu->base + L3C_EVENT_CTRL); |
| } |
| |
| static void hisi_l3c_pmu_enable_counter_int(struct hisi_pmu *l3c_pmu, |
| struct hw_perf_event *hwc) |
| { |
| u32 val; |
| |
| val = readl(l3c_pmu->base + L3C_INT_MASK); |
| /* Write 0 to enable interrupt */ |
| val &= ~(1 << hwc->idx); |
| writel(val, l3c_pmu->base + L3C_INT_MASK); |
| } |
| |
| static void hisi_l3c_pmu_disable_counter_int(struct hisi_pmu *l3c_pmu, |
| struct hw_perf_event *hwc) |
| { |
| u32 val; |
| |
| val = readl(l3c_pmu->base + L3C_INT_MASK); |
| /* Write 1 to mask interrupt */ |
| val |= (1 << hwc->idx); |
| writel(val, l3c_pmu->base + L3C_INT_MASK); |
| } |
| |
| static irqreturn_t hisi_l3c_pmu_isr(int irq, void *dev_id) |
| { |
| struct hisi_pmu *l3c_pmu = dev_id; |
| struct perf_event *event; |
| unsigned long overflown; |
| int idx; |
| |
| /* Read L3C_INT_STATUS register */ |
| overflown = readl(l3c_pmu->base + L3C_INT_STATUS); |
| if (!overflown) |
| return IRQ_NONE; |
| |
| /* |
| * Find the counter index which overflowed if the bit was set |
| * and handle it. |
| */ |
| for_each_set_bit(idx, &overflown, L3C_NR_COUNTERS) { |
| /* Write 1 to clear the IRQ status flag */ |
| writel((1 << idx), l3c_pmu->base + L3C_INT_CLEAR); |
| |
| /* Get the corresponding event struct */ |
| event = l3c_pmu->pmu_events.hw_events[idx]; |
| if (!event) |
| continue; |
| |
| hisi_uncore_pmu_event_update(event); |
| hisi_uncore_pmu_set_event_period(event); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int hisi_l3c_pmu_init_irq(struct hisi_pmu *l3c_pmu, |
| struct platform_device *pdev) |
| { |
| int irq, ret; |
| |
| /* Read and init IRQ */ |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| ret = devm_request_irq(&pdev->dev, irq, hisi_l3c_pmu_isr, |
| IRQF_NOBALANCING | IRQF_NO_THREAD, |
| dev_name(&pdev->dev), l3c_pmu); |
| if (ret < 0) { |
| dev_err(&pdev->dev, |
| "Fail to request IRQ:%d ret:%d\n", irq, ret); |
| return ret; |
| } |
| |
| l3c_pmu->irq = irq; |
| |
| return 0; |
| } |
| |
| static const struct acpi_device_id hisi_l3c_pmu_acpi_match[] = { |
| { "HISI0213", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(acpi, hisi_l3c_pmu_acpi_match); |
| |
| static int hisi_l3c_pmu_init_data(struct platform_device *pdev, |
| struct hisi_pmu *l3c_pmu) |
| { |
| unsigned long long id; |
| acpi_status status; |
| |
| status = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev), |
| "_UID", NULL, &id); |
| if (ACPI_FAILURE(status)) |
| return -EINVAL; |
| |
| l3c_pmu->index_id = id; |
| |
| /* |
| * Use the SCCL_ID and CCL_ID to identify the L3C PMU, while |
| * SCCL_ID is in MPIDR[aff2] and CCL_ID is in MPIDR[aff1]. |
| */ |
| if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id", |
| &l3c_pmu->sccl_id)) { |
| dev_err(&pdev->dev, "Can not read l3c sccl-id!\n"); |
| return -EINVAL; |
| } |
| |
| if (device_property_read_u32(&pdev->dev, "hisilicon,ccl-id", |
| &l3c_pmu->ccl_id)) { |
| dev_err(&pdev->dev, "Can not read l3c ccl-id!\n"); |
| return -EINVAL; |
| } |
| |
| l3c_pmu->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(l3c_pmu->base)) { |
| dev_err(&pdev->dev, "ioremap failed for l3c_pmu resource\n"); |
| return PTR_ERR(l3c_pmu->base); |
| } |
| |
| return 0; |
| } |
| |
| static struct attribute *hisi_l3c_pmu_format_attr[] = { |
| HISI_PMU_FORMAT_ATTR(event, "config:0-7"), |
| NULL, |
| }; |
| |
| static const struct attribute_group hisi_l3c_pmu_format_group = { |
| .name = "format", |
| .attrs = hisi_l3c_pmu_format_attr, |
| }; |
| |
| static struct attribute *hisi_l3c_pmu_events_attr[] = { |
| HISI_PMU_EVENT_ATTR(rd_cpipe, 0x00), |
| HISI_PMU_EVENT_ATTR(wr_cpipe, 0x01), |
| HISI_PMU_EVENT_ATTR(rd_hit_cpipe, 0x02), |
| HISI_PMU_EVENT_ATTR(wr_hit_cpipe, 0x03), |
| HISI_PMU_EVENT_ATTR(victim_num, 0x04), |
| HISI_PMU_EVENT_ATTR(rd_spipe, 0x20), |
| HISI_PMU_EVENT_ATTR(wr_spipe, 0x21), |
| HISI_PMU_EVENT_ATTR(rd_hit_spipe, 0x22), |
| HISI_PMU_EVENT_ATTR(wr_hit_spipe, 0x23), |
| HISI_PMU_EVENT_ATTR(back_invalid, 0x29), |
| HISI_PMU_EVENT_ATTR(retry_cpu, 0x40), |
| HISI_PMU_EVENT_ATTR(retry_ring, 0x41), |
| HISI_PMU_EVENT_ATTR(prefetch_drop, 0x42), |
| NULL, |
| }; |
| |
| static const struct attribute_group hisi_l3c_pmu_events_group = { |
| .name = "events", |
| .attrs = hisi_l3c_pmu_events_attr, |
| }; |
| |
| static DEVICE_ATTR(cpumask, 0444, hisi_cpumask_sysfs_show, NULL); |
| |
| static struct attribute *hisi_l3c_pmu_cpumask_attrs[] = { |
| &dev_attr_cpumask.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group hisi_l3c_pmu_cpumask_attr_group = { |
| .attrs = hisi_l3c_pmu_cpumask_attrs, |
| }; |
| |
| static const struct attribute_group *hisi_l3c_pmu_attr_groups[] = { |
| &hisi_l3c_pmu_format_group, |
| &hisi_l3c_pmu_events_group, |
| &hisi_l3c_pmu_cpumask_attr_group, |
| NULL, |
| }; |
| |
| static const struct hisi_uncore_ops hisi_uncore_l3c_ops = { |
| .write_evtype = hisi_l3c_pmu_write_evtype, |
| .get_event_idx = hisi_uncore_pmu_get_event_idx, |
| .start_counters = hisi_l3c_pmu_start_counters, |
| .stop_counters = hisi_l3c_pmu_stop_counters, |
| .enable_counter = hisi_l3c_pmu_enable_counter, |
| .disable_counter = hisi_l3c_pmu_disable_counter, |
| .enable_counter_int = hisi_l3c_pmu_enable_counter_int, |
| .disable_counter_int = hisi_l3c_pmu_disable_counter_int, |
| .write_counter = hisi_l3c_pmu_write_counter, |
| .read_counter = hisi_l3c_pmu_read_counter, |
| }; |
| |
| static int hisi_l3c_pmu_dev_probe(struct platform_device *pdev, |
| struct hisi_pmu *l3c_pmu) |
| { |
| int ret; |
| |
| ret = hisi_l3c_pmu_init_data(pdev, l3c_pmu); |
| if (ret) |
| return ret; |
| |
| ret = hisi_l3c_pmu_init_irq(l3c_pmu, pdev); |
| if (ret) |
| return ret; |
| |
| l3c_pmu->num_counters = L3C_NR_COUNTERS; |
| l3c_pmu->counter_bits = 48; |
| l3c_pmu->ops = &hisi_uncore_l3c_ops; |
| l3c_pmu->dev = &pdev->dev; |
| l3c_pmu->on_cpu = -1; |
| l3c_pmu->check_event = 0x59; |
| |
| return 0; |
| } |
| |
| static int hisi_l3c_pmu_probe(struct platform_device *pdev) |
| { |
| struct hisi_pmu *l3c_pmu; |
| char *name; |
| int ret; |
| |
| l3c_pmu = devm_kzalloc(&pdev->dev, sizeof(*l3c_pmu), GFP_KERNEL); |
| if (!l3c_pmu) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, l3c_pmu); |
| |
| ret = hisi_l3c_pmu_dev_probe(pdev, l3c_pmu); |
| if (ret) |
| return ret; |
| |
| ret = cpuhp_state_add_instance(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE, |
| &l3c_pmu->node); |
| if (ret) { |
| dev_err(&pdev->dev, "Error %d registering hotplug\n", ret); |
| return ret; |
| } |
| |
| name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "hisi_sccl%u_l3c%u", |
| l3c_pmu->sccl_id, l3c_pmu->index_id); |
| l3c_pmu->pmu = (struct pmu) { |
| .name = name, |
| .task_ctx_nr = perf_invalid_context, |
| .event_init = hisi_uncore_pmu_event_init, |
| .pmu_enable = hisi_uncore_pmu_enable, |
| .pmu_disable = hisi_uncore_pmu_disable, |
| .add = hisi_uncore_pmu_add, |
| .del = hisi_uncore_pmu_del, |
| .start = hisi_uncore_pmu_start, |
| .stop = hisi_uncore_pmu_stop, |
| .read = hisi_uncore_pmu_read, |
| .attr_groups = hisi_l3c_pmu_attr_groups, |
| .capabilities = PERF_PMU_CAP_NO_EXCLUDE, |
| }; |
| |
| ret = perf_pmu_register(&l3c_pmu->pmu, name, -1); |
| if (ret) { |
| dev_err(l3c_pmu->dev, "L3C PMU register failed!\n"); |
| cpuhp_state_remove_instance(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE, |
| &l3c_pmu->node); |
| } |
| |
| return ret; |
| } |
| |
| static int hisi_l3c_pmu_remove(struct platform_device *pdev) |
| { |
| struct hisi_pmu *l3c_pmu = platform_get_drvdata(pdev); |
| |
| perf_pmu_unregister(&l3c_pmu->pmu); |
| cpuhp_state_remove_instance(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE, |
| &l3c_pmu->node); |
| |
| return 0; |
| } |
| |
| static struct platform_driver hisi_l3c_pmu_driver = { |
| .driver = { |
| .name = "hisi_l3c_pmu", |
| .acpi_match_table = ACPI_PTR(hisi_l3c_pmu_acpi_match), |
| }, |
| .probe = hisi_l3c_pmu_probe, |
| .remove = hisi_l3c_pmu_remove, |
| }; |
| |
| static int __init hisi_l3c_pmu_module_init(void) |
| { |
| int ret; |
| |
| ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE, |
| "AP_PERF_ARM_HISI_L3_ONLINE", |
| hisi_uncore_pmu_online_cpu, |
| hisi_uncore_pmu_offline_cpu); |
| if (ret) { |
| pr_err("L3C PMU: Error setup hotplug, ret = %d\n", ret); |
| return ret; |
| } |
| |
| ret = platform_driver_register(&hisi_l3c_pmu_driver); |
| if (ret) |
| cpuhp_remove_multi_state(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE); |
| |
| return ret; |
| } |
| module_init(hisi_l3c_pmu_module_init); |
| |
| static void __exit hisi_l3c_pmu_module_exit(void) |
| { |
| platform_driver_unregister(&hisi_l3c_pmu_driver); |
| cpuhp_remove_multi_state(CPUHP_AP_PERF_ARM_HISI_L3_ONLINE); |
| } |
| module_exit(hisi_l3c_pmu_module_exit); |
| |
| MODULE_DESCRIPTION("HiSilicon SoC L3C uncore PMU driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Anurup M <anurup.m@huawei.com>"); |
| MODULE_AUTHOR("Shaokun Zhang <zhangshaokun@hisilicon.com>"); |