| /* |
| * Copyright 2019 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #include "pp_debug.h" |
| #include <linux/firmware.h> |
| #include <linux/pci.h> |
| #include "amdgpu.h" |
| #include "amdgpu_smu.h" |
| #include "smu_internal.h" |
| #include "atomfirmware.h" |
| #include "amdgpu_atomfirmware.h" |
| #include "smu_v11_0.h" |
| #include "smu11_driver_if_navi10.h" |
| #include "soc15_common.h" |
| #include "atom.h" |
| #include "navi10_ppt.h" |
| #include "smu_v11_0_pptable.h" |
| #include "smu_v11_0_ppsmc.h" |
| #include "nbio/nbio_7_4_sh_mask.h" |
| |
| #include "asic_reg/mp/mp_11_0_sh_mask.h" |
| |
| #define FEATURE_MASK(feature) (1ULL << feature) |
| #define SMC_DPM_FEATURE ( \ |
| FEATURE_MASK(FEATURE_DPM_PREFETCHER_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_GFXCLK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_GFX_PACE_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_UCLK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_SOCCLK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_MP0CLK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_LINK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_DCEFCLK_BIT)) |
| |
| #define MSG_MAP(msg, index) \ |
| [SMU_MSG_##msg] = {1, (index)} |
| |
| static struct smu_11_0_cmn2aisc_mapping navi10_message_map[SMU_MSG_MAX_COUNT] = { |
| MSG_MAP(TestMessage, PPSMC_MSG_TestMessage), |
| MSG_MAP(GetSmuVersion, PPSMC_MSG_GetSmuVersion), |
| MSG_MAP(GetDriverIfVersion, PPSMC_MSG_GetDriverIfVersion), |
| MSG_MAP(SetAllowedFeaturesMaskLow, PPSMC_MSG_SetAllowedFeaturesMaskLow), |
| MSG_MAP(SetAllowedFeaturesMaskHigh, PPSMC_MSG_SetAllowedFeaturesMaskHigh), |
| MSG_MAP(EnableAllSmuFeatures, PPSMC_MSG_EnableAllSmuFeatures), |
| MSG_MAP(DisableAllSmuFeatures, PPSMC_MSG_DisableAllSmuFeatures), |
| MSG_MAP(EnableSmuFeaturesLow, PPSMC_MSG_EnableSmuFeaturesLow), |
| MSG_MAP(EnableSmuFeaturesHigh, PPSMC_MSG_EnableSmuFeaturesHigh), |
| MSG_MAP(DisableSmuFeaturesLow, PPSMC_MSG_DisableSmuFeaturesLow), |
| MSG_MAP(DisableSmuFeaturesHigh, PPSMC_MSG_DisableSmuFeaturesHigh), |
| MSG_MAP(GetEnabledSmuFeaturesLow, PPSMC_MSG_GetEnabledSmuFeaturesLow), |
| MSG_MAP(GetEnabledSmuFeaturesHigh, PPSMC_MSG_GetEnabledSmuFeaturesHigh), |
| MSG_MAP(SetWorkloadMask, PPSMC_MSG_SetWorkloadMask), |
| MSG_MAP(SetPptLimit, PPSMC_MSG_SetPptLimit), |
| MSG_MAP(SetDriverDramAddrHigh, PPSMC_MSG_SetDriverDramAddrHigh), |
| MSG_MAP(SetDriverDramAddrLow, PPSMC_MSG_SetDriverDramAddrLow), |
| MSG_MAP(SetToolsDramAddrHigh, PPSMC_MSG_SetToolsDramAddrHigh), |
| MSG_MAP(SetToolsDramAddrLow, PPSMC_MSG_SetToolsDramAddrLow), |
| MSG_MAP(TransferTableSmu2Dram, PPSMC_MSG_TransferTableSmu2Dram), |
| MSG_MAP(TransferTableDram2Smu, PPSMC_MSG_TransferTableDram2Smu), |
| MSG_MAP(UseDefaultPPTable, PPSMC_MSG_UseDefaultPPTable), |
| MSG_MAP(UseBackupPPTable, PPSMC_MSG_UseBackupPPTable), |
| MSG_MAP(RunBtc, PPSMC_MSG_RunBtc), |
| MSG_MAP(EnterBaco, PPSMC_MSG_EnterBaco), |
| MSG_MAP(SetSoftMinByFreq, PPSMC_MSG_SetSoftMinByFreq), |
| MSG_MAP(SetSoftMaxByFreq, PPSMC_MSG_SetSoftMaxByFreq), |
| MSG_MAP(SetHardMinByFreq, PPSMC_MSG_SetHardMinByFreq), |
| MSG_MAP(SetHardMaxByFreq, PPSMC_MSG_SetHardMaxByFreq), |
| MSG_MAP(GetMinDpmFreq, PPSMC_MSG_GetMinDpmFreq), |
| MSG_MAP(GetMaxDpmFreq, PPSMC_MSG_GetMaxDpmFreq), |
| MSG_MAP(GetDpmFreqByIndex, PPSMC_MSG_GetDpmFreqByIndex), |
| MSG_MAP(SetMemoryChannelConfig, PPSMC_MSG_SetMemoryChannelConfig), |
| MSG_MAP(SetGeminiMode, PPSMC_MSG_SetGeminiMode), |
| MSG_MAP(SetGeminiApertureHigh, PPSMC_MSG_SetGeminiApertureHigh), |
| MSG_MAP(SetGeminiApertureLow, PPSMC_MSG_SetGeminiApertureLow), |
| MSG_MAP(OverridePcieParameters, PPSMC_MSG_OverridePcieParameters), |
| MSG_MAP(SetMinDeepSleepDcefclk, PPSMC_MSG_SetMinDeepSleepDcefclk), |
| MSG_MAP(ReenableAcDcInterrupt, PPSMC_MSG_ReenableAcDcInterrupt), |
| MSG_MAP(NotifyPowerSource, PPSMC_MSG_NotifyPowerSource), |
| MSG_MAP(SetUclkFastSwitch, PPSMC_MSG_SetUclkFastSwitch), |
| MSG_MAP(SetVideoFps, PPSMC_MSG_SetVideoFps), |
| MSG_MAP(PrepareMp1ForUnload, PPSMC_MSG_PrepareMp1ForUnload), |
| MSG_MAP(DramLogSetDramAddrHigh, PPSMC_MSG_DramLogSetDramAddrHigh), |
| MSG_MAP(DramLogSetDramAddrLow, PPSMC_MSG_DramLogSetDramAddrLow), |
| MSG_MAP(DramLogSetDramSize, PPSMC_MSG_DramLogSetDramSize), |
| MSG_MAP(ConfigureGfxDidt, PPSMC_MSG_ConfigureGfxDidt), |
| MSG_MAP(NumOfDisplays, PPSMC_MSG_NumOfDisplays), |
| MSG_MAP(SetSystemVirtualDramAddrHigh, PPSMC_MSG_SetSystemVirtualDramAddrHigh), |
| MSG_MAP(SetSystemVirtualDramAddrLow, PPSMC_MSG_SetSystemVirtualDramAddrLow), |
| MSG_MAP(AllowGfxOff, PPSMC_MSG_AllowGfxOff), |
| MSG_MAP(DisallowGfxOff, PPSMC_MSG_DisallowGfxOff), |
| MSG_MAP(GetPptLimit, PPSMC_MSG_GetPptLimit), |
| MSG_MAP(GetDcModeMaxDpmFreq, PPSMC_MSG_GetDcModeMaxDpmFreq), |
| MSG_MAP(GetDebugData, PPSMC_MSG_GetDebugData), |
| MSG_MAP(ExitBaco, PPSMC_MSG_ExitBaco), |
| MSG_MAP(PrepareMp1ForReset, PPSMC_MSG_PrepareMp1ForReset), |
| MSG_MAP(PrepareMp1ForShutdown, PPSMC_MSG_PrepareMp1ForShutdown), |
| MSG_MAP(PowerUpVcn, PPSMC_MSG_PowerUpVcn), |
| MSG_MAP(PowerDownVcn, PPSMC_MSG_PowerDownVcn), |
| MSG_MAP(PowerUpJpeg, PPSMC_MSG_PowerUpJpeg), |
| MSG_MAP(PowerDownJpeg, PPSMC_MSG_PowerDownJpeg), |
| MSG_MAP(BacoAudioD3PME, PPSMC_MSG_BacoAudioD3PME), |
| MSG_MAP(ArmD3, PPSMC_MSG_ArmD3), |
| MSG_MAP(DAL_DISABLE_DUMMY_PSTATE_CHANGE,PPSMC_MSG_DALDisableDummyPstateChange), |
| MSG_MAP(DAL_ENABLE_DUMMY_PSTATE_CHANGE, PPSMC_MSG_DALEnableDummyPstateChange), |
| MSG_MAP(GetVoltageByDpm, PPSMC_MSG_GetVoltageByDpm), |
| MSG_MAP(GetVoltageByDpmOverdrive, PPSMC_MSG_GetVoltageByDpmOverdrive), |
| }; |
| |
| static struct smu_11_0_cmn2aisc_mapping navi10_clk_map[SMU_CLK_COUNT] = { |
| CLK_MAP(GFXCLK, PPCLK_GFXCLK), |
| CLK_MAP(SCLK, PPCLK_GFXCLK), |
| CLK_MAP(SOCCLK, PPCLK_SOCCLK), |
| CLK_MAP(FCLK, PPCLK_SOCCLK), |
| CLK_MAP(UCLK, PPCLK_UCLK), |
| CLK_MAP(MCLK, PPCLK_UCLK), |
| CLK_MAP(DCLK, PPCLK_DCLK), |
| CLK_MAP(VCLK, PPCLK_VCLK), |
| CLK_MAP(DCEFCLK, PPCLK_DCEFCLK), |
| CLK_MAP(DISPCLK, PPCLK_DISPCLK), |
| CLK_MAP(PIXCLK, PPCLK_PIXCLK), |
| CLK_MAP(PHYCLK, PPCLK_PHYCLK), |
| }; |
| |
| static struct smu_11_0_cmn2aisc_mapping navi10_feature_mask_map[SMU_FEATURE_COUNT] = { |
| FEA_MAP(DPM_PREFETCHER), |
| FEA_MAP(DPM_GFXCLK), |
| FEA_MAP(DPM_GFX_PACE), |
| FEA_MAP(DPM_UCLK), |
| FEA_MAP(DPM_SOCCLK), |
| FEA_MAP(DPM_MP0CLK), |
| FEA_MAP(DPM_LINK), |
| FEA_MAP(DPM_DCEFCLK), |
| FEA_MAP(MEM_VDDCI_SCALING), |
| FEA_MAP(MEM_MVDD_SCALING), |
| FEA_MAP(DS_GFXCLK), |
| FEA_MAP(DS_SOCCLK), |
| FEA_MAP(DS_LCLK), |
| FEA_MAP(DS_DCEFCLK), |
| FEA_MAP(DS_UCLK), |
| FEA_MAP(GFX_ULV), |
| FEA_MAP(FW_DSTATE), |
| FEA_MAP(GFXOFF), |
| FEA_MAP(BACO), |
| FEA_MAP(VCN_PG), |
| FEA_MAP(JPEG_PG), |
| FEA_MAP(USB_PG), |
| FEA_MAP(RSMU_SMN_CG), |
| FEA_MAP(PPT), |
| FEA_MAP(TDC), |
| FEA_MAP(GFX_EDC), |
| FEA_MAP(APCC_PLUS), |
| FEA_MAP(GTHR), |
| FEA_MAP(ACDC), |
| FEA_MAP(VR0HOT), |
| FEA_MAP(VR1HOT), |
| FEA_MAP(FW_CTF), |
| FEA_MAP(FAN_CONTROL), |
| FEA_MAP(THERMAL), |
| FEA_MAP(GFX_DCS), |
| FEA_MAP(RM), |
| FEA_MAP(LED_DISPLAY), |
| FEA_MAP(GFX_SS), |
| FEA_MAP(OUT_OF_BAND_MONITOR), |
| FEA_MAP(TEMP_DEPENDENT_VMIN), |
| FEA_MAP(MMHUB_PG), |
| FEA_MAP(ATHUB_PG), |
| FEA_MAP(APCC_DFLL), |
| }; |
| |
| static struct smu_11_0_cmn2aisc_mapping navi10_table_map[SMU_TABLE_COUNT] = { |
| TAB_MAP(PPTABLE), |
| TAB_MAP(WATERMARKS), |
| TAB_MAP(AVFS), |
| TAB_MAP(AVFS_PSM_DEBUG), |
| TAB_MAP(AVFS_FUSE_OVERRIDE), |
| TAB_MAP(PMSTATUSLOG), |
| TAB_MAP(SMU_METRICS), |
| TAB_MAP(DRIVER_SMU_CONFIG), |
| TAB_MAP(ACTIVITY_MONITOR_COEFF), |
| TAB_MAP(OVERDRIVE), |
| TAB_MAP(I2C_COMMANDS), |
| TAB_MAP(PACE), |
| }; |
| |
| static struct smu_11_0_cmn2aisc_mapping navi10_pwr_src_map[SMU_POWER_SOURCE_COUNT] = { |
| PWR_MAP(AC), |
| PWR_MAP(DC), |
| }; |
| |
| static struct smu_11_0_cmn2aisc_mapping navi10_workload_map[PP_SMC_POWER_PROFILE_COUNT] = { |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT, WORKLOAD_PPLIB_DEFAULT_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_FULLSCREEN3D, WORKLOAD_PPLIB_FULL_SCREEN_3D_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_POWERSAVING, WORKLOAD_PPLIB_POWER_SAVING_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_VIDEO, WORKLOAD_PPLIB_VIDEO_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_VR, WORKLOAD_PPLIB_VR_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_COMPUTE, WORKLOAD_PPLIB_COMPUTE_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_CUSTOM, WORKLOAD_PPLIB_CUSTOM_BIT), |
| }; |
| |
| static int navi10_get_smu_msg_index(struct smu_context *smc, uint32_t index) |
| { |
| struct smu_11_0_cmn2aisc_mapping mapping; |
| |
| if (index >= SMU_MSG_MAX_COUNT) |
| return -EINVAL; |
| |
| mapping = navi10_message_map[index]; |
| if (!(mapping.valid_mapping)) { |
| return -EINVAL; |
| } |
| |
| return mapping.map_to; |
| } |
| |
| static int navi10_get_smu_clk_index(struct smu_context *smc, uint32_t index) |
| { |
| struct smu_11_0_cmn2aisc_mapping mapping; |
| |
| if (index >= SMU_CLK_COUNT) |
| return -EINVAL; |
| |
| mapping = navi10_clk_map[index]; |
| if (!(mapping.valid_mapping)) { |
| return -EINVAL; |
| } |
| |
| return mapping.map_to; |
| } |
| |
| static int navi10_get_smu_feature_index(struct smu_context *smc, uint32_t index) |
| { |
| struct smu_11_0_cmn2aisc_mapping mapping; |
| |
| if (index >= SMU_FEATURE_COUNT) |
| return -EINVAL; |
| |
| mapping = navi10_feature_mask_map[index]; |
| if (!(mapping.valid_mapping)) { |
| return -EINVAL; |
| } |
| |
| return mapping.map_to; |
| } |
| |
| static int navi10_get_smu_table_index(struct smu_context *smc, uint32_t index) |
| { |
| struct smu_11_0_cmn2aisc_mapping mapping; |
| |
| if (index >= SMU_TABLE_COUNT) |
| return -EINVAL; |
| |
| mapping = navi10_table_map[index]; |
| if (!(mapping.valid_mapping)) { |
| return -EINVAL; |
| } |
| |
| return mapping.map_to; |
| } |
| |
| static int navi10_get_pwr_src_index(struct smu_context *smc, uint32_t index) |
| { |
| struct smu_11_0_cmn2aisc_mapping mapping; |
| |
| if (index >= SMU_POWER_SOURCE_COUNT) |
| return -EINVAL; |
| |
| mapping = navi10_pwr_src_map[index]; |
| if (!(mapping.valid_mapping)) { |
| return -EINVAL; |
| } |
| |
| return mapping.map_to; |
| } |
| |
| |
| static int navi10_get_workload_type(struct smu_context *smu, enum PP_SMC_POWER_PROFILE profile) |
| { |
| struct smu_11_0_cmn2aisc_mapping mapping; |
| |
| if (profile > PP_SMC_POWER_PROFILE_CUSTOM) |
| return -EINVAL; |
| |
| mapping = navi10_workload_map[profile]; |
| if (!(mapping.valid_mapping)) { |
| return -EINVAL; |
| } |
| |
| return mapping.map_to; |
| } |
| |
| static bool is_asic_secure(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| bool is_secure = true; |
| uint32_t mp0_fw_intf; |
| |
| mp0_fw_intf = RREG32_PCIE(MP0_Public | |
| (smnMP0_FW_INTF & 0xffffffff)); |
| |
| if (!(mp0_fw_intf & (1 << 19))) |
| is_secure = false; |
| |
| return is_secure; |
| } |
| |
| static int |
| navi10_get_allowed_feature_mask(struct smu_context *smu, |
| uint32_t *feature_mask, uint32_t num) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| |
| if (num > 2) |
| return -EINVAL; |
| |
| memset(feature_mask, 0, sizeof(uint32_t) * num); |
| |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_PREFETCHER_BIT) |
| | FEATURE_MASK(FEATURE_DPM_MP0CLK_BIT) |
| | FEATURE_MASK(FEATURE_RSMU_SMN_CG_BIT) |
| | FEATURE_MASK(FEATURE_DS_SOCCLK_BIT) |
| | FEATURE_MASK(FEATURE_PPT_BIT) |
| | FEATURE_MASK(FEATURE_TDC_BIT) |
| | FEATURE_MASK(FEATURE_GFX_EDC_BIT) |
| | FEATURE_MASK(FEATURE_APCC_PLUS_BIT) |
| | FEATURE_MASK(FEATURE_VR0HOT_BIT) |
| | FEATURE_MASK(FEATURE_FAN_CONTROL_BIT) |
| | FEATURE_MASK(FEATURE_THERMAL_BIT) |
| | FEATURE_MASK(FEATURE_LED_DISPLAY_BIT) |
| | FEATURE_MASK(FEATURE_DS_LCLK_BIT) |
| | FEATURE_MASK(FEATURE_DS_DCEFCLK_BIT) |
| | FEATURE_MASK(FEATURE_FW_DSTATE_BIT) |
| | FEATURE_MASK(FEATURE_BACO_BIT) |
| | FEATURE_MASK(FEATURE_ACDC_BIT) |
| | FEATURE_MASK(FEATURE_GFX_SS_BIT) |
| | FEATURE_MASK(FEATURE_APCC_DFLL_BIT) |
| | FEATURE_MASK(FEATURE_FW_CTF_BIT) |
| | FEATURE_MASK(FEATURE_OUT_OF_BAND_MONITOR_BIT); |
| |
| if (adev->pm.pp_feature & PP_SOCCLK_DPM_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_SOCCLK_BIT); |
| |
| if (adev->pm.pp_feature & PP_SCLK_DPM_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_GFXCLK_BIT); |
| |
| if (adev->pm.pp_feature & PP_PCIE_DPM_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_LINK_BIT); |
| |
| if (adev->pm.pp_feature & PP_DCEFCLK_DPM_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_DCEFCLK_BIT); |
| |
| if (adev->pm.pp_feature & PP_MCLK_DPM_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_UCLK_BIT) |
| | FEATURE_MASK(FEATURE_MEM_VDDCI_SCALING_BIT) |
| | FEATURE_MASK(FEATURE_MEM_MVDD_SCALING_BIT); |
| |
| if (adev->pm.pp_feature & PP_ULV_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_GFX_ULV_BIT); |
| |
| if (adev->pm.pp_feature & PP_SCLK_DEEP_SLEEP_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DS_GFXCLK_BIT); |
| |
| if (adev->pm.pp_feature & PP_GFXOFF_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_GFXOFF_BIT); |
| |
| if (smu->adev->pg_flags & AMD_PG_SUPPORT_MMHUB) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_MMHUB_PG_BIT); |
| |
| if (smu->adev->pg_flags & AMD_PG_SUPPORT_ATHUB) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_ATHUB_PG_BIT); |
| |
| if (smu->adev->pg_flags & AMD_PG_SUPPORT_VCN) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_VCN_PG_BIT); |
| |
| if (smu->adev->pg_flags & AMD_PG_SUPPORT_JPEG) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_JPEG_PG_BIT); |
| |
| /* disable DPM UCLK and DS SOCCLK on navi10 A0 secure board */ |
| if (is_asic_secure(smu)) { |
| /* only for navi10 A0 */ |
| if ((adev->asic_type == CHIP_NAVI10) && |
| (adev->rev_id == 0)) { |
| *(uint64_t *)feature_mask &= |
| ~(FEATURE_MASK(FEATURE_DPM_UCLK_BIT) |
| | FEATURE_MASK(FEATURE_MEM_VDDCI_SCALING_BIT) |
| | FEATURE_MASK(FEATURE_MEM_MVDD_SCALING_BIT)); |
| *(uint64_t *)feature_mask &= |
| ~FEATURE_MASK(FEATURE_DS_SOCCLK_BIT); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_check_powerplay_table(struct smu_context *smu) |
| { |
| return 0; |
| } |
| |
| static int navi10_append_powerplay_table(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| struct smu_table_context *table_context = &smu->smu_table; |
| PPTable_t *smc_pptable = table_context->driver_pptable; |
| struct atom_smc_dpm_info_v4_5 *smc_dpm_table; |
| int index, ret; |
| |
| index = get_index_into_master_table(atom_master_list_of_data_tables_v2_1, |
| smc_dpm_info); |
| |
| ret = smu_get_atom_data_table(smu, index, NULL, NULL, NULL, |
| (uint8_t **)&smc_dpm_table); |
| if (ret) |
| return ret; |
| |
| memcpy(smc_pptable->I2cControllers, smc_dpm_table->I2cControllers, |
| sizeof(I2cControllerConfig_t) * NUM_I2C_CONTROLLERS); |
| |
| /* SVI2 Board Parameters */ |
| smc_pptable->MaxVoltageStepGfx = smc_dpm_table->MaxVoltageStepGfx; |
| smc_pptable->MaxVoltageStepSoc = smc_dpm_table->MaxVoltageStepSoc; |
| smc_pptable->VddGfxVrMapping = smc_dpm_table->VddGfxVrMapping; |
| smc_pptable->VddSocVrMapping = smc_dpm_table->VddSocVrMapping; |
| smc_pptable->VddMem0VrMapping = smc_dpm_table->VddMem0VrMapping; |
| smc_pptable->VddMem1VrMapping = smc_dpm_table->VddMem1VrMapping; |
| smc_pptable->GfxUlvPhaseSheddingMask = smc_dpm_table->GfxUlvPhaseSheddingMask; |
| smc_pptable->SocUlvPhaseSheddingMask = smc_dpm_table->SocUlvPhaseSheddingMask; |
| smc_pptable->ExternalSensorPresent = smc_dpm_table->ExternalSensorPresent; |
| smc_pptable->Padding8_V = smc_dpm_table->Padding8_V; |
| |
| /* Telemetry Settings */ |
| smc_pptable->GfxMaxCurrent = smc_dpm_table->GfxMaxCurrent; |
| smc_pptable->GfxOffset = smc_dpm_table->GfxOffset; |
| smc_pptable->Padding_TelemetryGfx = smc_dpm_table->Padding_TelemetryGfx; |
| smc_pptable->SocMaxCurrent = smc_dpm_table->SocMaxCurrent; |
| smc_pptable->SocOffset = smc_dpm_table->SocOffset; |
| smc_pptable->Padding_TelemetrySoc = smc_dpm_table->Padding_TelemetrySoc; |
| smc_pptable->Mem0MaxCurrent = smc_dpm_table->Mem0MaxCurrent; |
| smc_pptable->Mem0Offset = smc_dpm_table->Mem0Offset; |
| smc_pptable->Padding_TelemetryMem0 = smc_dpm_table->Padding_TelemetryMem0; |
| smc_pptable->Mem1MaxCurrent = smc_dpm_table->Mem1MaxCurrent; |
| smc_pptable->Mem1Offset = smc_dpm_table->Mem1Offset; |
| smc_pptable->Padding_TelemetryMem1 = smc_dpm_table->Padding_TelemetryMem1; |
| |
| /* GPIO Settings */ |
| smc_pptable->AcDcGpio = smc_dpm_table->AcDcGpio; |
| smc_pptable->AcDcPolarity = smc_dpm_table->AcDcPolarity; |
| smc_pptable->VR0HotGpio = smc_dpm_table->VR0HotGpio; |
| smc_pptable->VR0HotPolarity = smc_dpm_table->VR0HotPolarity; |
| smc_pptable->VR1HotGpio = smc_dpm_table->VR1HotGpio; |
| smc_pptable->VR1HotPolarity = smc_dpm_table->VR1HotPolarity; |
| smc_pptable->GthrGpio = smc_dpm_table->GthrGpio; |
| smc_pptable->GthrPolarity = smc_dpm_table->GthrPolarity; |
| |
| /* LED Display Settings */ |
| smc_pptable->LedPin0 = smc_dpm_table->LedPin0; |
| smc_pptable->LedPin1 = smc_dpm_table->LedPin1; |
| smc_pptable->LedPin2 = smc_dpm_table->LedPin2; |
| smc_pptable->padding8_4 = smc_dpm_table->padding8_4; |
| |
| /* GFXCLK PLL Spread Spectrum */ |
| smc_pptable->PllGfxclkSpreadEnabled = smc_dpm_table->PllGfxclkSpreadEnabled; |
| smc_pptable->PllGfxclkSpreadPercent = smc_dpm_table->PllGfxclkSpreadPercent; |
| smc_pptable->PllGfxclkSpreadFreq = smc_dpm_table->PllGfxclkSpreadFreq; |
| |
| /* GFXCLK DFLL Spread Spectrum */ |
| smc_pptable->DfllGfxclkSpreadEnabled = smc_dpm_table->DfllGfxclkSpreadEnabled; |
| smc_pptable->DfllGfxclkSpreadPercent = smc_dpm_table->DfllGfxclkSpreadPercent; |
| smc_pptable->DfllGfxclkSpreadFreq = smc_dpm_table->DfllGfxclkSpreadFreq; |
| |
| /* UCLK Spread Spectrum */ |
| smc_pptable->UclkSpreadEnabled = smc_dpm_table->UclkSpreadEnabled; |
| smc_pptable->UclkSpreadPercent = smc_dpm_table->UclkSpreadPercent; |
| smc_pptable->UclkSpreadFreq = smc_dpm_table->UclkSpreadFreq; |
| |
| /* SOCCLK Spread Spectrum */ |
| smc_pptable->SoclkSpreadEnabled = smc_dpm_table->SoclkSpreadEnabled; |
| smc_pptable->SocclkSpreadPercent = smc_dpm_table->SocclkSpreadPercent; |
| smc_pptable->SocclkSpreadFreq = smc_dpm_table->SocclkSpreadFreq; |
| |
| /* Total board power */ |
| smc_pptable->TotalBoardPower = smc_dpm_table->TotalBoardPower; |
| smc_pptable->BoardPadding = smc_dpm_table->BoardPadding; |
| |
| /* Mvdd Svi2 Div Ratio Setting */ |
| smc_pptable->MvddRatio = smc_dpm_table->MvddRatio; |
| |
| if (adev->pm.pp_feature & PP_GFXOFF_MASK) { |
| /* TODO: remove it once SMU fw fix it */ |
| smc_pptable->DebugOverrides |= DPM_OVERRIDE_DISABLE_DFLL_PLL_SHUTDOWN; |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_store_powerplay_table(struct smu_context *smu) |
| { |
| struct smu_11_0_powerplay_table *powerplay_table = NULL; |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_baco_context *smu_baco = &smu->smu_baco; |
| |
| if (!table_context->power_play_table) |
| return -EINVAL; |
| |
| powerplay_table = table_context->power_play_table; |
| |
| memcpy(table_context->driver_pptable, &powerplay_table->smc_pptable, |
| sizeof(PPTable_t)); |
| |
| table_context->thermal_controller_type = powerplay_table->thermal_controller_type; |
| |
| mutex_lock(&smu_baco->mutex); |
| if (powerplay_table->platform_caps & SMU_11_0_PP_PLATFORM_CAP_BACO || |
| powerplay_table->platform_caps & SMU_11_0_PP_PLATFORM_CAP_MACO) |
| smu_baco->platform_support = true; |
| mutex_unlock(&smu_baco->mutex); |
| |
| return 0; |
| } |
| |
| static int navi10_tables_init(struct smu_context *smu, struct smu_table *tables) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| |
| SMU_TABLE_INIT(tables, SMU_TABLE_PPTABLE, sizeof(PPTable_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_WATERMARKS, sizeof(Watermarks_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_SMU_METRICS, sizeof(SmuMetrics_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_OVERDRIVE, sizeof(OverDriveTable_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_PMSTATUSLOG, SMU11_TOOL_SIZE, |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_ACTIVITY_MONITOR_COEFF, |
| sizeof(DpmActivityMonitorCoeffInt_t), PAGE_SIZE, |
| AMDGPU_GEM_DOMAIN_VRAM); |
| |
| smu_table->metrics_table = kzalloc(sizeof(SmuMetrics_t), GFP_KERNEL); |
| if (!smu_table->metrics_table) |
| return -ENOMEM; |
| smu_table->metrics_time = 0; |
| |
| smu_table->watermarks_table = kzalloc(sizeof(Watermarks_t), GFP_KERNEL); |
| if (!smu_table->watermarks_table) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static int navi10_get_metrics_table(struct smu_context *smu, |
| SmuMetrics_t *metrics_table) |
| { |
| struct smu_table_context *smu_table= &smu->smu_table; |
| int ret = 0; |
| |
| mutex_lock(&smu->metrics_lock); |
| if (!smu_table->metrics_time || time_after(jiffies, smu_table->metrics_time + msecs_to_jiffies(100))) { |
| ret = smu_update_table(smu, SMU_TABLE_SMU_METRICS, 0, |
| (void *)smu_table->metrics_table, false); |
| if (ret) { |
| pr_info("Failed to export SMU metrics table!\n"); |
| mutex_unlock(&smu->metrics_lock); |
| return ret; |
| } |
| smu_table->metrics_time = jiffies; |
| } |
| |
| memcpy(metrics_table, smu_table->metrics_table, sizeof(SmuMetrics_t)); |
| mutex_unlock(&smu->metrics_lock); |
| |
| return ret; |
| } |
| |
| static int navi10_allocate_dpm_context(struct smu_context *smu) |
| { |
| struct smu_dpm_context *smu_dpm = &smu->smu_dpm; |
| |
| if (smu_dpm->dpm_context) |
| return -EINVAL; |
| |
| smu_dpm->dpm_context = kzalloc(sizeof(struct smu_11_0_dpm_context), |
| GFP_KERNEL); |
| if (!smu_dpm->dpm_context) |
| return -ENOMEM; |
| |
| smu_dpm->dpm_context_size = sizeof(struct smu_11_0_dpm_context); |
| |
| return 0; |
| } |
| |
| static int navi10_set_default_dpm_table(struct smu_context *smu) |
| { |
| struct smu_dpm_context *smu_dpm = &smu->smu_dpm; |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_11_0_dpm_context *dpm_context = smu_dpm->dpm_context; |
| PPTable_t *driver_ppt = NULL; |
| int i; |
| |
| driver_ppt = table_context->driver_pptable; |
| |
| dpm_context->dpm_tables.soc_table.min = driver_ppt->FreqTableSocclk[0]; |
| dpm_context->dpm_tables.soc_table.max = driver_ppt->FreqTableSocclk[NUM_SOCCLK_DPM_LEVELS - 1]; |
| |
| dpm_context->dpm_tables.gfx_table.min = driver_ppt->FreqTableGfx[0]; |
| dpm_context->dpm_tables.gfx_table.max = driver_ppt->FreqTableGfx[NUM_GFXCLK_DPM_LEVELS - 1]; |
| |
| dpm_context->dpm_tables.uclk_table.min = driver_ppt->FreqTableUclk[0]; |
| dpm_context->dpm_tables.uclk_table.max = driver_ppt->FreqTableUclk[NUM_UCLK_DPM_LEVELS - 1]; |
| |
| dpm_context->dpm_tables.vclk_table.min = driver_ppt->FreqTableVclk[0]; |
| dpm_context->dpm_tables.vclk_table.max = driver_ppt->FreqTableVclk[NUM_VCLK_DPM_LEVELS - 1]; |
| |
| dpm_context->dpm_tables.dclk_table.min = driver_ppt->FreqTableDclk[0]; |
| dpm_context->dpm_tables.dclk_table.max = driver_ppt->FreqTableDclk[NUM_DCLK_DPM_LEVELS - 1]; |
| |
| dpm_context->dpm_tables.dcef_table.min = driver_ppt->FreqTableDcefclk[0]; |
| dpm_context->dpm_tables.dcef_table.max = driver_ppt->FreqTableDcefclk[NUM_DCEFCLK_DPM_LEVELS - 1]; |
| |
| dpm_context->dpm_tables.pixel_table.min = driver_ppt->FreqTablePixclk[0]; |
| dpm_context->dpm_tables.pixel_table.max = driver_ppt->FreqTablePixclk[NUM_PIXCLK_DPM_LEVELS - 1]; |
| |
| dpm_context->dpm_tables.display_table.min = driver_ppt->FreqTableDispclk[0]; |
| dpm_context->dpm_tables.display_table.max = driver_ppt->FreqTableDispclk[NUM_DISPCLK_DPM_LEVELS - 1]; |
| |
| dpm_context->dpm_tables.phy_table.min = driver_ppt->FreqTablePhyclk[0]; |
| dpm_context->dpm_tables.phy_table.max = driver_ppt->FreqTablePhyclk[NUM_PHYCLK_DPM_LEVELS - 1]; |
| |
| for (i = 0; i < MAX_PCIE_CONF; i++) { |
| dpm_context->dpm_tables.pcie_table.pcie_gen[i] = driver_ppt->PcieGenSpeed[i]; |
| dpm_context->dpm_tables.pcie_table.pcie_lane[i] = driver_ppt->PcieLaneCount[i]; |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_dpm_set_uvd_enable(struct smu_context *smu, bool enable) |
| { |
| struct smu_power_context *smu_power = &smu->smu_power; |
| struct smu_power_gate *power_gate = &smu_power->power_gate; |
| int ret = 0; |
| |
| if (enable) { |
| /* vcn dpm on is a prerequisite for vcn power gate messages */ |
| if (smu_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT)) { |
| ret = smu_send_smc_msg_with_param(smu, SMU_MSG_PowerUpVcn, 1); |
| if (ret) |
| return ret; |
| } |
| power_gate->vcn_gated = false; |
| } else { |
| if (smu_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT)) { |
| ret = smu_send_smc_msg(smu, SMU_MSG_PowerDownVcn); |
| if (ret) |
| return ret; |
| } |
| power_gate->vcn_gated = true; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_dpm_set_jpeg_enable(struct smu_context *smu, bool enable) |
| { |
| struct smu_power_context *smu_power = &smu->smu_power; |
| struct smu_power_gate *power_gate = &smu_power->power_gate; |
| int ret = 0; |
| |
| if (enable) { |
| if (smu_feature_is_enabled(smu, SMU_FEATURE_JPEG_PG_BIT)) { |
| ret = smu_send_smc_msg(smu, SMU_MSG_PowerUpJpeg); |
| if (ret) |
| return ret; |
| } |
| power_gate->jpeg_gated = false; |
| } else { |
| if (smu_feature_is_enabled(smu, SMU_FEATURE_JPEG_PG_BIT)) { |
| ret = smu_send_smc_msg(smu, SMU_MSG_PowerDownJpeg); |
| if (ret) |
| return ret; |
| } |
| power_gate->jpeg_gated = true; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_get_current_clk_freq_by_table(struct smu_context *smu, |
| enum smu_clk_type clk_type, |
| uint32_t *value) |
| { |
| int ret = 0, clk_id = 0; |
| SmuMetrics_t metrics; |
| |
| ret = navi10_get_metrics_table(smu, &metrics); |
| if (ret) |
| return ret; |
| |
| clk_id = smu_clk_get_index(smu, clk_type); |
| if (clk_id < 0) |
| return clk_id; |
| |
| *value = metrics.CurrClock[clk_id]; |
| |
| return ret; |
| } |
| |
| static bool navi10_is_support_fine_grained_dpm(struct smu_context *smu, enum smu_clk_type clk_type) |
| { |
| PPTable_t *pptable = smu->smu_table.driver_pptable; |
| DpmDescriptor_t *dpm_desc = NULL; |
| uint32_t clk_index = 0; |
| |
| clk_index = smu_clk_get_index(smu, clk_type); |
| dpm_desc = &pptable->DpmDescriptor[clk_index]; |
| |
| /* 0 - Fine grained DPM, 1 - Discrete DPM */ |
| return dpm_desc->SnapToDiscrete == 0 ? true : false; |
| } |
| |
| static inline bool navi10_od_feature_is_supported(struct smu_11_0_overdrive_table *od_table, enum SMU_11_0_ODFEATURE_CAP cap) |
| { |
| return od_table->cap[cap]; |
| } |
| |
| static void navi10_od_setting_get_range(struct smu_11_0_overdrive_table *od_table, |
| enum SMU_11_0_ODSETTING_ID setting, |
| uint32_t *min, uint32_t *max) |
| { |
| if (min) |
| *min = od_table->min[setting]; |
| if (max) |
| *max = od_table->max[setting]; |
| } |
| |
| static int navi10_print_clk_levels(struct smu_context *smu, |
| enum smu_clk_type clk_type, char *buf) |
| { |
| uint16_t *curve_settings; |
| int i, size = 0, ret = 0; |
| uint32_t cur_value = 0, value = 0, count = 0; |
| uint32_t freq_values[3] = {0}; |
| uint32_t mark_index = 0; |
| struct smu_table_context *table_context = &smu->smu_table; |
| uint32_t gen_speed, lane_width; |
| struct smu_dpm_context *smu_dpm = &smu->smu_dpm; |
| struct smu_11_0_dpm_context *dpm_context = smu_dpm->dpm_context; |
| struct amdgpu_device *adev = smu->adev; |
| PPTable_t *pptable = (PPTable_t *)table_context->driver_pptable; |
| OverDriveTable_t *od_table = |
| (OverDriveTable_t *)table_context->overdrive_table; |
| struct smu_11_0_overdrive_table *od_settings = smu->od_settings; |
| uint32_t min_value, max_value; |
| |
| switch (clk_type) { |
| case SMU_GFXCLK: |
| case SMU_SCLK: |
| case SMU_SOCCLK: |
| case SMU_MCLK: |
| case SMU_UCLK: |
| case SMU_FCLK: |
| case SMU_DCEFCLK: |
| ret = smu_get_current_clk_freq(smu, clk_type, &cur_value); |
| if (ret) |
| return size; |
| |
| /* 10KHz -> MHz */ |
| cur_value = cur_value / 100; |
| |
| ret = smu_get_dpm_level_count(smu, clk_type, &count); |
| if (ret) |
| return size; |
| |
| if (!navi10_is_support_fine_grained_dpm(smu, clk_type)) { |
| for (i = 0; i < count; i++) { |
| ret = smu_get_dpm_freq_by_index(smu, clk_type, i, &value); |
| if (ret) |
| return size; |
| |
| size += sprintf(buf + size, "%d: %uMhz %s\n", i, value, |
| cur_value == value ? "*" : ""); |
| } |
| } else { |
| ret = smu_get_dpm_freq_by_index(smu, clk_type, 0, &freq_values[0]); |
| if (ret) |
| return size; |
| ret = smu_get_dpm_freq_by_index(smu, clk_type, count - 1, &freq_values[2]); |
| if (ret) |
| return size; |
| |
| freq_values[1] = cur_value; |
| mark_index = cur_value == freq_values[0] ? 0 : |
| cur_value == freq_values[2] ? 2 : 1; |
| if (mark_index != 1) |
| freq_values[1] = (freq_values[0] + freq_values[2]) / 2; |
| |
| for (i = 0; i < 3; i++) { |
| size += sprintf(buf + size, "%d: %uMhz %s\n", i, freq_values[i], |
| i == mark_index ? "*" : ""); |
| } |
| |
| } |
| break; |
| case SMU_PCIE: |
| gen_speed = (RREG32_PCIE(smnPCIE_LC_SPEED_CNTL) & |
| PSWUSP0_PCIE_LC_SPEED_CNTL__LC_CURRENT_DATA_RATE_MASK) |
| >> PSWUSP0_PCIE_LC_SPEED_CNTL__LC_CURRENT_DATA_RATE__SHIFT; |
| lane_width = (RREG32_PCIE(smnPCIE_LC_LINK_WIDTH_CNTL) & |
| PCIE_LC_LINK_WIDTH_CNTL__LC_LINK_WIDTH_RD_MASK) |
| >> PCIE_LC_LINK_WIDTH_CNTL__LC_LINK_WIDTH_RD__SHIFT; |
| for (i = 0; i < NUM_LINK_LEVELS; i++) |
| size += sprintf(buf + size, "%d: %s %s %dMhz %s\n", i, |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 0) ? "2.5GT/s," : |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 1) ? "5.0GT/s," : |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 2) ? "8.0GT/s," : |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 3) ? "16.0GT/s," : "", |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 1) ? "x1" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 2) ? "x2" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 3) ? "x4" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 4) ? "x8" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 5) ? "x12" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 6) ? "x16" : "", |
| pptable->LclkFreq[i], |
| (gen_speed == dpm_context->dpm_tables.pcie_table.pcie_gen[i]) && |
| (lane_width == dpm_context->dpm_tables.pcie_table.pcie_lane[i]) ? |
| "*" : ""); |
| break; |
| case SMU_OD_SCLK: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| break; |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_LIMITS)) |
| break; |
| size += sprintf(buf + size, "OD_SCLK:\n"); |
| size += sprintf(buf + size, "0: %uMhz\n1: %uMhz\n", od_table->GfxclkFmin, od_table->GfxclkFmax); |
| break; |
| case SMU_OD_MCLK: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| break; |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_UCLK_MAX)) |
| break; |
| size += sprintf(buf + size, "OD_MCLK:\n"); |
| size += sprintf(buf + size, "1: %uMHz\n", od_table->UclkFmax); |
| break; |
| case SMU_OD_VDDC_CURVE: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| break; |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_CURVE)) |
| break; |
| size += sprintf(buf + size, "OD_VDDC_CURVE:\n"); |
| for (i = 0; i < 3; i++) { |
| switch (i) { |
| case 0: |
| curve_settings = &od_table->GfxclkFreq1; |
| break; |
| case 1: |
| curve_settings = &od_table->GfxclkFreq2; |
| break; |
| case 2: |
| curve_settings = &od_table->GfxclkFreq3; |
| break; |
| default: |
| break; |
| } |
| size += sprintf(buf + size, "%d: %uMHz @ %umV\n", i, curve_settings[0], curve_settings[1] / NAVI10_VOLTAGE_SCALE); |
| } |
| break; |
| case SMU_OD_RANGE: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| break; |
| size = sprintf(buf, "%s:\n", "OD_RANGE"); |
| |
| if (navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_LIMITS)) { |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_GFXCLKFMIN, |
| &min_value, NULL); |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_GFXCLKFMAX, |
| NULL, &max_value); |
| size += sprintf(buf + size, "SCLK: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| } |
| |
| if (navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_UCLK_MAX)) { |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_UCLKFMAX, |
| &min_value, &max_value); |
| size += sprintf(buf + size, "MCLK: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| } |
| |
| if (navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_CURVE)) { |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P1, |
| &min_value, &max_value); |
| size += sprintf(buf + size, "VDDC_CURVE_SCLK[0]: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P1, |
| &min_value, &max_value); |
| size += sprintf(buf + size, "VDDC_CURVE_VOLT[0]: %7dmV %11dmV\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P2, |
| &min_value, &max_value); |
| size += sprintf(buf + size, "VDDC_CURVE_SCLK[1]: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P2, |
| &min_value, &max_value); |
| size += sprintf(buf + size, "VDDC_CURVE_VOLT[1]: %7dmV %11dmV\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P3, |
| &min_value, &max_value); |
| size += sprintf(buf + size, "VDDC_CURVE_SCLK[2]: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P3, |
| &min_value, &max_value); |
| size += sprintf(buf + size, "VDDC_CURVE_VOLT[2]: %7dmV %11dmV\n", |
| min_value, max_value); |
| } |
| |
| break; |
| default: |
| break; |
| } |
| |
| return size; |
| } |
| |
| static int navi10_force_clk_levels(struct smu_context *smu, |
| enum smu_clk_type clk_type, uint32_t mask) |
| { |
| |
| int ret = 0, size = 0; |
| uint32_t soft_min_level = 0, soft_max_level = 0, min_freq = 0, max_freq = 0; |
| |
| soft_min_level = mask ? (ffs(mask) - 1) : 0; |
| soft_max_level = mask ? (fls(mask) - 1) : 0; |
| |
| switch (clk_type) { |
| case SMU_GFXCLK: |
| case SMU_SCLK: |
| case SMU_SOCCLK: |
| case SMU_MCLK: |
| case SMU_UCLK: |
| case SMU_DCEFCLK: |
| case SMU_FCLK: |
| /* There is only 2 levels for fine grained DPM */ |
| if (navi10_is_support_fine_grained_dpm(smu, clk_type)) { |
| soft_max_level = (soft_max_level >= 1 ? 1 : 0); |
| soft_min_level = (soft_min_level >= 1 ? 1 : 0); |
| } |
| |
| ret = smu_get_dpm_freq_by_index(smu, clk_type, soft_min_level, &min_freq); |
| if (ret) |
| return size; |
| |
| ret = smu_get_dpm_freq_by_index(smu, clk_type, soft_max_level, &max_freq); |
| if (ret) |
| return size; |
| |
| ret = smu_set_soft_freq_range(smu, clk_type, min_freq, max_freq); |
| if (ret) |
| return size; |
| break; |
| default: |
| break; |
| } |
| |
| return size; |
| } |
| |
| static int navi10_populate_umd_state_clk(struct smu_context *smu) |
| { |
| int ret = 0; |
| uint32_t min_sclk_freq = 0, min_mclk_freq = 0; |
| |
| ret = smu_get_dpm_freq_range(smu, SMU_SCLK, &min_sclk_freq, NULL, false); |
| if (ret) |
| return ret; |
| |
| smu->pstate_sclk = min_sclk_freq * 100; |
| |
| ret = smu_get_dpm_freq_range(smu, SMU_MCLK, &min_mclk_freq, NULL, false); |
| if (ret) |
| return ret; |
| |
| smu->pstate_mclk = min_mclk_freq * 100; |
| |
| return ret; |
| } |
| |
| static int navi10_get_clock_by_type_with_latency(struct smu_context *smu, |
| enum smu_clk_type clk_type, |
| struct pp_clock_levels_with_latency *clocks) |
| { |
| int ret = 0, i = 0; |
| uint32_t level_count = 0, freq = 0; |
| |
| switch (clk_type) { |
| case SMU_GFXCLK: |
| case SMU_DCEFCLK: |
| case SMU_SOCCLK: |
| case SMU_MCLK: |
| case SMU_UCLK: |
| ret = smu_get_dpm_level_count(smu, clk_type, &level_count); |
| if (ret) |
| return ret; |
| |
| level_count = min(level_count, (uint32_t)MAX_NUM_CLOCKS); |
| clocks->num_levels = level_count; |
| |
| for (i = 0; i < level_count; i++) { |
| ret = smu_get_dpm_freq_by_index(smu, clk_type, i, &freq); |
| if (ret) |
| return ret; |
| |
| clocks->data[i].clocks_in_khz = freq * 1000; |
| clocks->data[i].latency_in_us = 0; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_pre_display_config_changed(struct smu_context *smu) |
| { |
| int ret = 0; |
| uint32_t max_freq = 0; |
| |
| ret = smu_send_smc_msg_with_param(smu, SMU_MSG_NumOfDisplays, 0); |
| if (ret) |
| return ret; |
| |
| if (smu_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT)) { |
| ret = smu_get_dpm_freq_range(smu, SMU_UCLK, NULL, &max_freq, false); |
| if (ret) |
| return ret; |
| ret = smu_set_hard_freq_range(smu, SMU_UCLK, 0, max_freq); |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_display_config_changed(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| if ((smu->watermarks_bitmap & WATERMARKS_EXIST) && |
| !(smu->watermarks_bitmap & WATERMARKS_LOADED)) { |
| ret = smu_write_watermarks_table(smu); |
| if (ret) |
| return ret; |
| |
| smu->watermarks_bitmap |= WATERMARKS_LOADED; |
| } |
| |
| if ((smu->watermarks_bitmap & WATERMARKS_EXIST) && |
| smu_feature_is_supported(smu, SMU_FEATURE_DPM_DCEFCLK_BIT) && |
| smu_feature_is_supported(smu, SMU_FEATURE_DPM_SOCCLK_BIT)) { |
| ret = smu_send_smc_msg_with_param(smu, SMU_MSG_NumOfDisplays, |
| smu->display_config->num_display); |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_force_dpm_limit_value(struct smu_context *smu, bool highest) |
| { |
| int ret = 0, i = 0; |
| uint32_t min_freq, max_freq, force_freq; |
| enum smu_clk_type clk_type; |
| |
| enum smu_clk_type clks[] = { |
| SMU_GFXCLK, |
| SMU_MCLK, |
| SMU_SOCCLK, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(clks); i++) { |
| clk_type = clks[i]; |
| ret = smu_get_dpm_freq_range(smu, clk_type, &min_freq, &max_freq, false); |
| if (ret) |
| return ret; |
| |
| force_freq = highest ? max_freq : min_freq; |
| ret = smu_set_soft_freq_range(smu, clk_type, force_freq, force_freq); |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_unforce_dpm_levels(struct smu_context *smu) |
| { |
| int ret = 0, i = 0; |
| uint32_t min_freq, max_freq; |
| enum smu_clk_type clk_type; |
| |
| enum smu_clk_type clks[] = { |
| SMU_GFXCLK, |
| SMU_MCLK, |
| SMU_SOCCLK, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(clks); i++) { |
| clk_type = clks[i]; |
| ret = smu_get_dpm_freq_range(smu, clk_type, &min_freq, &max_freq, false); |
| if (ret) |
| return ret; |
| |
| ret = smu_set_soft_freq_range(smu, clk_type, min_freq, max_freq); |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_get_gpu_power(struct smu_context *smu, uint32_t *value) |
| { |
| int ret = 0; |
| SmuMetrics_t metrics; |
| |
| if (!value) |
| return -EINVAL; |
| |
| ret = navi10_get_metrics_table(smu, &metrics); |
| if (ret) |
| return ret; |
| |
| *value = metrics.AverageSocketPower << 8; |
| |
| return 0; |
| } |
| |
| static int navi10_get_current_activity_percent(struct smu_context *smu, |
| enum amd_pp_sensors sensor, |
| uint32_t *value) |
| { |
| int ret = 0; |
| SmuMetrics_t metrics; |
| |
| if (!value) |
| return -EINVAL; |
| |
| ret = navi10_get_metrics_table(smu, &metrics); |
| if (ret) |
| return ret; |
| |
| switch (sensor) { |
| case AMDGPU_PP_SENSOR_GPU_LOAD: |
| *value = metrics.AverageGfxActivity; |
| break; |
| case AMDGPU_PP_SENSOR_MEM_LOAD: |
| *value = metrics.AverageUclkActivity; |
| break; |
| default: |
| pr_err("Invalid sensor for retrieving clock activity\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static bool navi10_is_dpm_running(struct smu_context *smu) |
| { |
| int ret = 0; |
| uint32_t feature_mask[2]; |
| unsigned long feature_enabled; |
| ret = smu_feature_get_enabled_mask(smu, feature_mask, 2); |
| feature_enabled = (unsigned long)((uint64_t)feature_mask[0] | |
| ((uint64_t)feature_mask[1] << 32)); |
| return !!(feature_enabled & SMC_DPM_FEATURE); |
| } |
| |
| static int navi10_get_fan_speed_rpm(struct smu_context *smu, |
| uint32_t *speed) |
| { |
| SmuMetrics_t metrics; |
| int ret = 0; |
| |
| if (!speed) |
| return -EINVAL; |
| |
| ret = navi10_get_metrics_table(smu, &metrics); |
| if (ret) |
| return ret; |
| |
| *speed = metrics.CurrFanSpeed; |
| |
| return ret; |
| } |
| |
| static int navi10_get_fan_speed_percent(struct smu_context *smu, |
| uint32_t *speed) |
| { |
| int ret = 0; |
| uint32_t percent = 0; |
| uint32_t current_rpm; |
| PPTable_t *pptable = smu->smu_table.driver_pptable; |
| |
| ret = navi10_get_fan_speed_rpm(smu, ¤t_rpm); |
| if (ret) |
| return ret; |
| |
| percent = current_rpm * 100 / pptable->FanMaximumRpm; |
| *speed = percent > 100 ? 100 : percent; |
| |
| return ret; |
| } |
| |
| static int navi10_get_power_profile_mode(struct smu_context *smu, char *buf) |
| { |
| DpmActivityMonitorCoeffInt_t activity_monitor; |
| uint32_t i, size = 0; |
| int16_t workload_type = 0; |
| static const char *profile_name[] = { |
| "BOOTUP_DEFAULT", |
| "3D_FULL_SCREEN", |
| "POWER_SAVING", |
| "VIDEO", |
| "VR", |
| "COMPUTE", |
| "CUSTOM"}; |
| static const char *title[] = { |
| "PROFILE_INDEX(NAME)", |
| "CLOCK_TYPE(NAME)", |
| "FPS", |
| "MinFreqType", |
| "MinActiveFreqType", |
| "MinActiveFreq", |
| "BoosterFreqType", |
| "BoosterFreq", |
| "PD_Data_limit_c", |
| "PD_Data_error_coeff", |
| "PD_Data_error_rate_coeff"}; |
| int result = 0; |
| |
| if (!buf) |
| return -EINVAL; |
| |
| size += sprintf(buf + size, "%16s %s %s %s %s %s %s %s %s %s %s\n", |
| title[0], title[1], title[2], title[3], title[4], title[5], |
| title[6], title[7], title[8], title[9], title[10]); |
| |
| for (i = 0; i <= PP_SMC_POWER_PROFILE_CUSTOM; i++) { |
| /* conv PP_SMC_POWER_PROFILE* to WORKLOAD_PPLIB_*_BIT */ |
| workload_type = smu_workload_get_type(smu, i); |
| if (workload_type < 0) |
| return -EINVAL; |
| |
| result = smu_update_table(smu, |
| SMU_TABLE_ACTIVITY_MONITOR_COEFF, workload_type, |
| (void *)(&activity_monitor), false); |
| if (result) { |
| pr_err("[%s] Failed to get activity monitor!", __func__); |
| return result; |
| } |
| |
| size += sprintf(buf + size, "%2d %14s%s:\n", |
| i, profile_name[i], (i == smu->power_profile_mode) ? "*" : " "); |
| |
| size += sprintf(buf + size, "%19s %d(%13s) %7d %7d %7d %7d %7d %7d %7d %7d %7d\n", |
| " ", |
| 0, |
| "GFXCLK", |
| activity_monitor.Gfx_FPS, |
| activity_monitor.Gfx_MinFreqStep, |
| activity_monitor.Gfx_MinActiveFreqType, |
| activity_monitor.Gfx_MinActiveFreq, |
| activity_monitor.Gfx_BoosterFreqType, |
| activity_monitor.Gfx_BoosterFreq, |
| activity_monitor.Gfx_PD_Data_limit_c, |
| activity_monitor.Gfx_PD_Data_error_coeff, |
| activity_monitor.Gfx_PD_Data_error_rate_coeff); |
| |
| size += sprintf(buf + size, "%19s %d(%13s) %7d %7d %7d %7d %7d %7d %7d %7d %7d\n", |
| " ", |
| 1, |
| "SOCCLK", |
| activity_monitor.Soc_FPS, |
| activity_monitor.Soc_MinFreqStep, |
| activity_monitor.Soc_MinActiveFreqType, |
| activity_monitor.Soc_MinActiveFreq, |
| activity_monitor.Soc_BoosterFreqType, |
| activity_monitor.Soc_BoosterFreq, |
| activity_monitor.Soc_PD_Data_limit_c, |
| activity_monitor.Soc_PD_Data_error_coeff, |
| activity_monitor.Soc_PD_Data_error_rate_coeff); |
| |
| size += sprintf(buf + size, "%19s %d(%13s) %7d %7d %7d %7d %7d %7d %7d %7d %7d\n", |
| " ", |
| 2, |
| "MEMLK", |
| activity_monitor.Mem_FPS, |
| activity_monitor.Mem_MinFreqStep, |
| activity_monitor.Mem_MinActiveFreqType, |
| activity_monitor.Mem_MinActiveFreq, |
| activity_monitor.Mem_BoosterFreqType, |
| activity_monitor.Mem_BoosterFreq, |
| activity_monitor.Mem_PD_Data_limit_c, |
| activity_monitor.Mem_PD_Data_error_coeff, |
| activity_monitor.Mem_PD_Data_error_rate_coeff); |
| } |
| |
| return size; |
| } |
| |
| static int navi10_set_power_profile_mode(struct smu_context *smu, long *input, uint32_t size) |
| { |
| DpmActivityMonitorCoeffInt_t activity_monitor; |
| int workload_type, ret = 0; |
| |
| smu->power_profile_mode = input[size]; |
| |
| if (smu->power_profile_mode > PP_SMC_POWER_PROFILE_CUSTOM) { |
| pr_err("Invalid power profile mode %d\n", smu->power_profile_mode); |
| return -EINVAL; |
| } |
| |
| if (smu->power_profile_mode == PP_SMC_POWER_PROFILE_CUSTOM) { |
| if (size < 0) |
| return -EINVAL; |
| |
| ret = smu_update_table(smu, |
| SMU_TABLE_ACTIVITY_MONITOR_COEFF, WORKLOAD_PPLIB_CUSTOM_BIT, |
| (void *)(&activity_monitor), false); |
| if (ret) { |
| pr_err("[%s] Failed to get activity monitor!", __func__); |
| return ret; |
| } |
| |
| switch (input[0]) { |
| case 0: /* Gfxclk */ |
| activity_monitor.Gfx_FPS = input[1]; |
| activity_monitor.Gfx_MinFreqStep = input[2]; |
| activity_monitor.Gfx_MinActiveFreqType = input[3]; |
| activity_monitor.Gfx_MinActiveFreq = input[4]; |
| activity_monitor.Gfx_BoosterFreqType = input[5]; |
| activity_monitor.Gfx_BoosterFreq = input[6]; |
| activity_monitor.Gfx_PD_Data_limit_c = input[7]; |
| activity_monitor.Gfx_PD_Data_error_coeff = input[8]; |
| activity_monitor.Gfx_PD_Data_error_rate_coeff = input[9]; |
| break; |
| case 1: /* Socclk */ |
| activity_monitor.Soc_FPS = input[1]; |
| activity_monitor.Soc_MinFreqStep = input[2]; |
| activity_monitor.Soc_MinActiveFreqType = input[3]; |
| activity_monitor.Soc_MinActiveFreq = input[4]; |
| activity_monitor.Soc_BoosterFreqType = input[5]; |
| activity_monitor.Soc_BoosterFreq = input[6]; |
| activity_monitor.Soc_PD_Data_limit_c = input[7]; |
| activity_monitor.Soc_PD_Data_error_coeff = input[8]; |
| activity_monitor.Soc_PD_Data_error_rate_coeff = input[9]; |
| break; |
| case 2: /* Memlk */ |
| activity_monitor.Mem_FPS = input[1]; |
| activity_monitor.Mem_MinFreqStep = input[2]; |
| activity_monitor.Mem_MinActiveFreqType = input[3]; |
| activity_monitor.Mem_MinActiveFreq = input[4]; |
| activity_monitor.Mem_BoosterFreqType = input[5]; |
| activity_monitor.Mem_BoosterFreq = input[6]; |
| activity_monitor.Mem_PD_Data_limit_c = input[7]; |
| activity_monitor.Mem_PD_Data_error_coeff = input[8]; |
| activity_monitor.Mem_PD_Data_error_rate_coeff = input[9]; |
| break; |
| } |
| |
| ret = smu_update_table(smu, |
| SMU_TABLE_ACTIVITY_MONITOR_COEFF, WORKLOAD_PPLIB_CUSTOM_BIT, |
| (void *)(&activity_monitor), true); |
| if (ret) { |
| pr_err("[%s] Failed to set activity monitor!", __func__); |
| return ret; |
| } |
| } |
| |
| /* conv PP_SMC_POWER_PROFILE* to WORKLOAD_PPLIB_*_BIT */ |
| workload_type = smu_workload_get_type(smu, smu->power_profile_mode); |
| if (workload_type < 0) |
| return -EINVAL; |
| smu_send_smc_msg_with_param(smu, SMU_MSG_SetWorkloadMask, |
| 1 << workload_type); |
| |
| return ret; |
| } |
| |
| static int navi10_get_profiling_clk_mask(struct smu_context *smu, |
| enum amd_dpm_forced_level level, |
| uint32_t *sclk_mask, |
| uint32_t *mclk_mask, |
| uint32_t *soc_mask) |
| { |
| int ret = 0; |
| uint32_t level_count = 0; |
| |
| if (level == AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK) { |
| if (sclk_mask) |
| *sclk_mask = 0; |
| } else if (level == AMD_DPM_FORCED_LEVEL_PROFILE_MIN_MCLK) { |
| if (mclk_mask) |
| *mclk_mask = 0; |
| } else if (level == AMD_DPM_FORCED_LEVEL_PROFILE_PEAK) { |
| if(sclk_mask) { |
| ret = smu_get_dpm_level_count(smu, SMU_SCLK, &level_count); |
| if (ret) |
| return ret; |
| *sclk_mask = level_count - 1; |
| } |
| |
| if(mclk_mask) { |
| ret = smu_get_dpm_level_count(smu, SMU_MCLK, &level_count); |
| if (ret) |
| return ret; |
| *mclk_mask = level_count - 1; |
| } |
| |
| if(soc_mask) { |
| ret = smu_get_dpm_level_count(smu, SMU_SOCCLK, &level_count); |
| if (ret) |
| return ret; |
| *soc_mask = level_count - 1; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_notify_smc_display_config(struct smu_context *smu) |
| { |
| struct smu_clocks min_clocks = {0}; |
| struct pp_display_clock_request clock_req; |
| int ret = 0; |
| |
| min_clocks.dcef_clock = smu->display_config->min_dcef_set_clk; |
| min_clocks.dcef_clock_in_sr = smu->display_config->min_dcef_deep_sleep_set_clk; |
| min_clocks.memory_clock = smu->display_config->min_mem_set_clock; |
| |
| if (smu_feature_is_supported(smu, SMU_FEATURE_DPM_DCEFCLK_BIT)) { |
| clock_req.clock_type = amd_pp_dcef_clock; |
| clock_req.clock_freq_in_khz = min_clocks.dcef_clock * 10; |
| |
| ret = smu_v11_0_display_clock_voltage_request(smu, &clock_req); |
| if (!ret) { |
| if (smu_feature_is_supported(smu, SMU_FEATURE_DS_DCEFCLK_BIT)) { |
| ret = smu_send_smc_msg_with_param(smu, |
| SMU_MSG_SetMinDeepSleepDcefclk, |
| min_clocks.dcef_clock_in_sr/100); |
| if (ret) { |
| pr_err("Attempt to set divider for DCEFCLK Failed!"); |
| return ret; |
| } |
| } |
| } else { |
| pr_info("Attempt to set Hard Min for DCEFCLK Failed!"); |
| } |
| } |
| |
| if (smu_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT)) { |
| ret = smu_set_hard_freq_range(smu, SMU_UCLK, min_clocks.memory_clock/100, 0); |
| if (ret) { |
| pr_err("[%s] Set hard min uclk failed!", __func__); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_set_watermarks_table(struct smu_context *smu, |
| void *watermarks, struct |
| dm_pp_wm_sets_with_clock_ranges_soc15 |
| *clock_ranges) |
| { |
| int i; |
| Watermarks_t *table = watermarks; |
| |
| if (!table || !clock_ranges) |
| return -EINVAL; |
| |
| if (clock_ranges->num_wm_dmif_sets > 4 || |
| clock_ranges->num_wm_mcif_sets > 4) |
| return -EINVAL; |
| |
| for (i = 0; i < clock_ranges->num_wm_dmif_sets; i++) { |
| table->WatermarkRow[1][i].MinClock = |
| cpu_to_le16((uint16_t) |
| (clock_ranges->wm_dmif_clocks_ranges[i].wm_min_dcfclk_clk_in_khz / |
| 1000)); |
| table->WatermarkRow[1][i].MaxClock = |
| cpu_to_le16((uint16_t) |
| (clock_ranges->wm_dmif_clocks_ranges[i].wm_max_dcfclk_clk_in_khz / |
| 1000)); |
| table->WatermarkRow[1][i].MinUclk = |
| cpu_to_le16((uint16_t) |
| (clock_ranges->wm_dmif_clocks_ranges[i].wm_min_mem_clk_in_khz / |
| 1000)); |
| table->WatermarkRow[1][i].MaxUclk = |
| cpu_to_le16((uint16_t) |
| (clock_ranges->wm_dmif_clocks_ranges[i].wm_max_mem_clk_in_khz / |
| 1000)); |
| table->WatermarkRow[1][i].WmSetting = (uint8_t) |
| clock_ranges->wm_dmif_clocks_ranges[i].wm_set_id; |
| } |
| |
| for (i = 0; i < clock_ranges->num_wm_mcif_sets; i++) { |
| table->WatermarkRow[0][i].MinClock = |
| cpu_to_le16((uint16_t) |
| (clock_ranges->wm_mcif_clocks_ranges[i].wm_min_socclk_clk_in_khz / |
| 1000)); |
| table->WatermarkRow[0][i].MaxClock = |
| cpu_to_le16((uint16_t) |
| (clock_ranges->wm_mcif_clocks_ranges[i].wm_max_socclk_clk_in_khz / |
| 1000)); |
| table->WatermarkRow[0][i].MinUclk = |
| cpu_to_le16((uint16_t) |
| (clock_ranges->wm_mcif_clocks_ranges[i].wm_min_mem_clk_in_khz / |
| 1000)); |
| table->WatermarkRow[0][i].MaxUclk = |
| cpu_to_le16((uint16_t) |
| (clock_ranges->wm_mcif_clocks_ranges[i].wm_max_mem_clk_in_khz / |
| 1000)); |
| table->WatermarkRow[0][i].WmSetting = (uint8_t) |
| clock_ranges->wm_mcif_clocks_ranges[i].wm_set_id; |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_thermal_get_temperature(struct smu_context *smu, |
| enum amd_pp_sensors sensor, |
| uint32_t *value) |
| { |
| SmuMetrics_t metrics; |
| int ret = 0; |
| |
| if (!value) |
| return -EINVAL; |
| |
| ret = navi10_get_metrics_table(smu, &metrics); |
| if (ret) |
| return ret; |
| |
| switch (sensor) { |
| case AMDGPU_PP_SENSOR_HOTSPOT_TEMP: |
| *value = metrics.TemperatureHotspot * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case AMDGPU_PP_SENSOR_EDGE_TEMP: |
| *value = metrics.TemperatureEdge * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case AMDGPU_PP_SENSOR_MEM_TEMP: |
| *value = metrics.TemperatureMem * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| default: |
| pr_err("Invalid sensor for retrieving temp\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_read_sensor(struct smu_context *smu, |
| enum amd_pp_sensors sensor, |
| void *data, uint32_t *size) |
| { |
| int ret = 0; |
| struct smu_table_context *table_context = &smu->smu_table; |
| PPTable_t *pptable = table_context->driver_pptable; |
| |
| if(!data || !size) |
| return -EINVAL; |
| |
| mutex_lock(&smu->sensor_lock); |
| switch (sensor) { |
| case AMDGPU_PP_SENSOR_MAX_FAN_RPM: |
| *(uint32_t *)data = pptable->FanMaximumRpm; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_MEM_LOAD: |
| case AMDGPU_PP_SENSOR_GPU_LOAD: |
| ret = navi10_get_current_activity_percent(smu, sensor, (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_GPU_POWER: |
| ret = navi10_get_gpu_power(smu, (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_HOTSPOT_TEMP: |
| case AMDGPU_PP_SENSOR_EDGE_TEMP: |
| case AMDGPU_PP_SENSOR_MEM_TEMP: |
| ret = navi10_thermal_get_temperature(smu, sensor, (uint32_t *)data); |
| *size = 4; |
| break; |
| default: |
| ret = smu_v11_0_read_sensor(smu, sensor, data, size); |
| } |
| mutex_unlock(&smu->sensor_lock); |
| |
| return ret; |
| } |
| |
| static int navi10_get_uclk_dpm_states(struct smu_context *smu, uint32_t *clocks_in_khz, uint32_t *num_states) |
| { |
| uint32_t num_discrete_levels = 0; |
| uint16_t *dpm_levels = NULL; |
| uint16_t i = 0; |
| struct smu_table_context *table_context = &smu->smu_table; |
| PPTable_t *driver_ppt = NULL; |
| |
| if (!clocks_in_khz || !num_states || !table_context->driver_pptable) |
| return -EINVAL; |
| |
| driver_ppt = table_context->driver_pptable; |
| num_discrete_levels = driver_ppt->DpmDescriptor[PPCLK_UCLK].NumDiscreteLevels; |
| dpm_levels = driver_ppt->FreqTableUclk; |
| |
| if (num_discrete_levels == 0 || dpm_levels == NULL) |
| return -EINVAL; |
| |
| *num_states = num_discrete_levels; |
| for (i = 0; i < num_discrete_levels; i++) { |
| /* convert to khz */ |
| *clocks_in_khz = (*dpm_levels) * 1000; |
| clocks_in_khz++; |
| dpm_levels++; |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_set_performance_level(struct smu_context *smu, |
| enum amd_dpm_forced_level level); |
| |
| static int navi10_set_standard_performance_level(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int ret = 0; |
| uint32_t sclk_freq = 0, uclk_freq = 0; |
| |
| switch (adev->asic_type) { |
| case CHIP_NAVI10: |
| sclk_freq = NAVI10_UMD_PSTATE_PROFILING_GFXCLK; |
| uclk_freq = NAVI10_UMD_PSTATE_PROFILING_MEMCLK; |
| break; |
| case CHIP_NAVI14: |
| sclk_freq = NAVI14_UMD_PSTATE_PROFILING_GFXCLK; |
| uclk_freq = NAVI14_UMD_PSTATE_PROFILING_MEMCLK; |
| break; |
| default: |
| /* by default, this is same as auto performance level */ |
| return navi10_set_performance_level(smu, AMD_DPM_FORCED_LEVEL_AUTO); |
| } |
| |
| ret = smu_set_soft_freq_range(smu, SMU_SCLK, sclk_freq, sclk_freq); |
| if (ret) |
| return ret; |
| ret = smu_set_soft_freq_range(smu, SMU_UCLK, uclk_freq, uclk_freq); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| static int navi10_set_peak_performance_level(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int ret = 0; |
| uint32_t sclk_freq = 0, uclk_freq = 0; |
| |
| switch (adev->asic_type) { |
| case CHIP_NAVI10: |
| switch (adev->pdev->revision) { |
| case 0xf0: /* XTX */ |
| case 0xc0: |
| sclk_freq = NAVI10_PEAK_SCLK_XTX; |
| break; |
| case 0xf1: /* XT */ |
| case 0xc1: |
| sclk_freq = NAVI10_PEAK_SCLK_XT; |
| break; |
| default: /* XL */ |
| sclk_freq = NAVI10_PEAK_SCLK_XL; |
| break; |
| } |
| break; |
| case CHIP_NAVI14: |
| switch (adev->pdev->revision) { |
| case 0xc7: /* XT */ |
| case 0xf4: |
| sclk_freq = NAVI14_UMD_PSTATE_PEAK_XT_GFXCLK; |
| break; |
| case 0xc1: /* XTM */ |
| case 0xf2: |
| sclk_freq = NAVI14_UMD_PSTATE_PEAK_XTM_GFXCLK; |
| break; |
| case 0xc3: /* XLM */ |
| case 0xf3: |
| sclk_freq = NAVI14_UMD_PSTATE_PEAK_XLM_GFXCLK; |
| break; |
| case 0xc5: /* XTX */ |
| case 0xf6: |
| sclk_freq = NAVI14_UMD_PSTATE_PEAK_XLM_GFXCLK; |
| break; |
| default: /* XL */ |
| sclk_freq = NAVI14_UMD_PSTATE_PEAK_XL_GFXCLK; |
| break; |
| } |
| break; |
| case CHIP_NAVI12: |
| sclk_freq = NAVI12_UMD_PSTATE_PEAK_GFXCLK; |
| break; |
| default: |
| ret = smu_get_dpm_level_range(smu, SMU_SCLK, NULL, &sclk_freq); |
| if (ret) |
| return ret; |
| } |
| |
| ret = smu_get_dpm_level_range(smu, SMU_UCLK, NULL, &uclk_freq); |
| if (ret) |
| return ret; |
| |
| ret = smu_set_soft_freq_range(smu, SMU_SCLK, sclk_freq, sclk_freq); |
| if (ret) |
| return ret; |
| ret = smu_set_soft_freq_range(smu, SMU_UCLK, uclk_freq, uclk_freq); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| static int navi10_set_performance_level(struct smu_context *smu, |
| enum amd_dpm_forced_level level) |
| { |
| int ret = 0; |
| uint32_t sclk_mask, mclk_mask, soc_mask; |
| |
| switch (level) { |
| case AMD_DPM_FORCED_LEVEL_HIGH: |
| ret = smu_force_dpm_limit_value(smu, true); |
| break; |
| case AMD_DPM_FORCED_LEVEL_LOW: |
| ret = smu_force_dpm_limit_value(smu, false); |
| break; |
| case AMD_DPM_FORCED_LEVEL_AUTO: |
| ret = smu_unforce_dpm_levels(smu); |
| break; |
| case AMD_DPM_FORCED_LEVEL_PROFILE_STANDARD: |
| ret = navi10_set_standard_performance_level(smu); |
| break; |
| case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK: |
| case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_MCLK: |
| ret = smu_get_profiling_clk_mask(smu, level, |
| &sclk_mask, |
| &mclk_mask, |
| &soc_mask); |
| if (ret) |
| return ret; |
| smu_force_clk_levels(smu, SMU_SCLK, 1 << sclk_mask, false); |
| smu_force_clk_levels(smu, SMU_MCLK, 1 << mclk_mask, false); |
| smu_force_clk_levels(smu, SMU_SOCCLK, 1 << soc_mask, false); |
| break; |
| case AMD_DPM_FORCED_LEVEL_PROFILE_PEAK: |
| ret = navi10_set_peak_performance_level(smu); |
| break; |
| case AMD_DPM_FORCED_LEVEL_MANUAL: |
| case AMD_DPM_FORCED_LEVEL_PROFILE_EXIT: |
| default: |
| break; |
| } |
| return ret; |
| } |
| |
| static int navi10_get_thermal_temperature_range(struct smu_context *smu, |
| struct smu_temperature_range *range) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_11_0_powerplay_table *powerplay_table = table_context->power_play_table; |
| |
| if (!range || !powerplay_table) |
| return -EINVAL; |
| |
| range->max = powerplay_table->software_shutdown_temp * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| |
| return 0; |
| } |
| |
| static int navi10_display_disable_memory_clock_switch(struct smu_context *smu, |
| bool disable_memory_clock_switch) |
| { |
| int ret = 0; |
| struct smu_11_0_max_sustainable_clocks *max_sustainable_clocks = |
| (struct smu_11_0_max_sustainable_clocks *) |
| smu->smu_table.max_sustainable_clocks; |
| uint32_t min_memory_clock = smu->hard_min_uclk_req_from_dal; |
| uint32_t max_memory_clock = max_sustainable_clocks->uclock; |
| |
| if(smu->disable_uclk_switch == disable_memory_clock_switch) |
| return 0; |
| |
| if(disable_memory_clock_switch) |
| ret = smu_set_hard_freq_range(smu, SMU_UCLK, max_memory_clock, 0); |
| else |
| ret = smu_set_hard_freq_range(smu, SMU_UCLK, min_memory_clock, 0); |
| |
| if(!ret) |
| smu->disable_uclk_switch = disable_memory_clock_switch; |
| |
| return ret; |
| } |
| |
| static uint32_t navi10_get_pptable_power_limit(struct smu_context *smu) |
| { |
| PPTable_t *pptable = smu->smu_table.driver_pptable; |
| return pptable->SocketPowerLimitAc[PPT_THROTTLER_PPT0]; |
| } |
| |
| static int navi10_get_power_limit(struct smu_context *smu, |
| uint32_t *limit, |
| bool cap) |
| { |
| PPTable_t *pptable = smu->smu_table.driver_pptable; |
| uint32_t asic_default_power_limit = 0; |
| int ret = 0; |
| int power_src; |
| |
| if (!smu->power_limit) { |
| if (smu_feature_is_enabled(smu, SMU_FEATURE_PPT_BIT)) { |
| power_src = smu_power_get_index(smu, SMU_POWER_SOURCE_AC); |
| if (power_src < 0) |
| return -EINVAL; |
| |
| ret = smu_send_smc_msg_with_param(smu, SMU_MSG_GetPptLimit, |
| power_src << 16); |
| if (ret) { |
| pr_err("[%s] get PPT limit failed!", __func__); |
| return ret; |
| } |
| smu_read_smc_arg(smu, &asic_default_power_limit); |
| } else { |
| /* the last hope to figure out the ppt limit */ |
| if (!pptable) { |
| pr_err("Cannot get PPT limit due to pptable missing!"); |
| return -EINVAL; |
| } |
| asic_default_power_limit = |
| pptable->SocketPowerLimitAc[PPT_THROTTLER_PPT0]; |
| } |
| |
| smu->power_limit = asic_default_power_limit; |
| } |
| |
| if (cap) |
| *limit = smu_v11_0_get_max_power_limit(smu); |
| else |
| *limit = smu->power_limit; |
| |
| return 0; |
| } |
| |
| static int navi10_update_pcie_parameters(struct smu_context *smu, |
| uint32_t pcie_gen_cap, |
| uint32_t pcie_width_cap) |
| { |
| PPTable_t *pptable = smu->smu_table.driver_pptable; |
| int ret, i; |
| uint32_t smu_pcie_arg; |
| |
| struct smu_dpm_context *smu_dpm = &smu->smu_dpm; |
| struct smu_11_0_dpm_context *dpm_context = smu_dpm->dpm_context; |
| |
| for (i = 0; i < NUM_LINK_LEVELS; i++) { |
| smu_pcie_arg = (i << 16) | |
| ((pptable->PcieGenSpeed[i] <= pcie_gen_cap) ? (pptable->PcieGenSpeed[i] << 8) : |
| (pcie_gen_cap << 8)) | ((pptable->PcieLaneCount[i] <= pcie_width_cap) ? |
| pptable->PcieLaneCount[i] : pcie_width_cap); |
| ret = smu_send_smc_msg_with_param(smu, |
| SMU_MSG_OverridePcieParameters, |
| smu_pcie_arg); |
| |
| if (ret) |
| return ret; |
| |
| if (pptable->PcieGenSpeed[i] > pcie_gen_cap) |
| dpm_context->dpm_tables.pcie_table.pcie_gen[i] = pcie_gen_cap; |
| if (pptable->PcieLaneCount[i] > pcie_width_cap) |
| dpm_context->dpm_tables.pcie_table.pcie_lane[i] = pcie_width_cap; |
| } |
| |
| return 0; |
| } |
| |
| static inline void navi10_dump_od_table(OverDriveTable_t *od_table) { |
| pr_debug("OD: Gfxclk: (%d, %d)\n", od_table->GfxclkFmin, od_table->GfxclkFmax); |
| pr_debug("OD: Gfx1: (%d, %d)\n", od_table->GfxclkFreq1, od_table->GfxclkVolt1); |
| pr_debug("OD: Gfx2: (%d, %d)\n", od_table->GfxclkFreq2, od_table->GfxclkVolt2); |
| pr_debug("OD: Gfx3: (%d, %d)\n", od_table->GfxclkFreq3, od_table->GfxclkVolt3); |
| pr_debug("OD: UclkFmax: %d\n", od_table->UclkFmax); |
| pr_debug("OD: OverDrivePct: %d\n", od_table->OverDrivePct); |
| } |
| |
| static int navi10_od_setting_check_range(struct smu_11_0_overdrive_table *od_table, enum SMU_11_0_ODSETTING_ID setting, uint32_t value) |
| { |
| if (value < od_table->min[setting]) { |
| pr_warn("OD setting (%d, %d) is less than the minimum allowed (%d)\n", setting, value, od_table->min[setting]); |
| return -EINVAL; |
| } |
| if (value > od_table->max[setting]) { |
| pr_warn("OD setting (%d, %d) is greater than the maximum allowed (%d)\n", setting, value, od_table->max[setting]); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int navi10_overdrive_get_gfx_clk_base_voltage(struct smu_context *smu, |
| uint16_t *voltage, |
| uint32_t freq) |
| { |
| uint32_t param = (freq & 0xFFFF) | (PPCLK_GFXCLK << 16); |
| uint32_t value = 0; |
| int ret; |
| |
| ret = smu_send_smc_msg_with_param(smu, |
| SMU_MSG_GetVoltageByDpm, |
| param); |
| if (ret) { |
| pr_err("[GetBaseVoltage] failed to get GFXCLK AVFS voltage from SMU!"); |
| return ret; |
| } |
| |
| smu_read_smc_arg(smu, &value); |
| *voltage = (uint16_t)value; |
| |
| return 0; |
| } |
| |
| static int navi10_setup_od_limits(struct smu_context *smu) { |
| struct smu_11_0_overdrive_table *overdrive_table = NULL; |
| struct smu_11_0_powerplay_table *powerplay_table = NULL; |
| |
| if (!smu->smu_table.power_play_table) { |
| pr_err("powerplay table uninitialized!\n"); |
| return -ENOENT; |
| } |
| powerplay_table = (struct smu_11_0_powerplay_table *)smu->smu_table.power_play_table; |
| overdrive_table = &powerplay_table->overdrive_table; |
| if (!smu->od_settings) { |
| smu->od_settings = kmemdup(overdrive_table, sizeof(struct smu_11_0_overdrive_table), GFP_KERNEL); |
| } else { |
| memcpy(smu->od_settings, overdrive_table, sizeof(struct smu_11_0_overdrive_table)); |
| } |
| return 0; |
| } |
| |
| static int navi10_set_default_od_settings(struct smu_context *smu, bool initialize) { |
| OverDriveTable_t *od_table, *boot_od_table; |
| int ret = 0; |
| |
| ret = smu_v11_0_set_default_od_settings(smu, initialize, sizeof(OverDriveTable_t)); |
| if (ret) |
| return ret; |
| |
| od_table = (OverDriveTable_t *)smu->smu_table.overdrive_table; |
| boot_od_table = (OverDriveTable_t *)smu->smu_table.boot_overdrive_table; |
| if (initialize) { |
| ret = navi10_setup_od_limits(smu); |
| if (ret) { |
| pr_err("Failed to retrieve board OD limits\n"); |
| return ret; |
| } |
| if (od_table) { |
| if (!od_table->GfxclkVolt1) { |
| ret = navi10_overdrive_get_gfx_clk_base_voltage(smu, |
| &od_table->GfxclkVolt1, |
| od_table->GfxclkFreq1); |
| if (ret) |
| od_table->GfxclkVolt1 = 0; |
| if (boot_od_table) |
| boot_od_table->GfxclkVolt1 = od_table->GfxclkVolt1; |
| } |
| |
| if (!od_table->GfxclkVolt2) { |
| ret = navi10_overdrive_get_gfx_clk_base_voltage(smu, |
| &od_table->GfxclkVolt2, |
| od_table->GfxclkFreq2); |
| if (ret) |
| od_table->GfxclkVolt2 = 0; |
| if (boot_od_table) |
| boot_od_table->GfxclkVolt2 = od_table->GfxclkVolt2; |
| } |
| |
| if (!od_table->GfxclkVolt3) { |
| ret = navi10_overdrive_get_gfx_clk_base_voltage(smu, |
| &od_table->GfxclkVolt3, |
| od_table->GfxclkFreq3); |
| if (ret) |
| od_table->GfxclkVolt3 = 0; |
| if (boot_od_table) |
| boot_od_table->GfxclkVolt3 = od_table->GfxclkVolt3; |
| } |
| } |
| } |
| |
| if (od_table) { |
| navi10_dump_od_table(od_table); |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_od_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_TABLE_COMMAND type, long input[], uint32_t size) { |
| int i; |
| int ret = 0; |
| struct smu_table_context *table_context = &smu->smu_table; |
| OverDriveTable_t *od_table; |
| struct smu_11_0_overdrive_table *od_settings; |
| enum SMU_11_0_ODSETTING_ID freq_setting, voltage_setting; |
| uint16_t *freq_ptr, *voltage_ptr; |
| od_table = (OverDriveTable_t *)table_context->overdrive_table; |
| |
| if (!smu->od_enabled) { |
| pr_warn("OverDrive is not enabled!\n"); |
| return -EINVAL; |
| } |
| |
| if (!smu->od_settings) { |
| pr_err("OD board limits are not set!\n"); |
| return -ENOENT; |
| } |
| |
| od_settings = smu->od_settings; |
| |
| switch (type) { |
| case PP_OD_EDIT_SCLK_VDDC_TABLE: |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_LIMITS)) { |
| pr_warn("GFXCLK_LIMITS not supported!\n"); |
| return -ENOTSUPP; |
| } |
| if (!table_context->overdrive_table) { |
| pr_err("Overdrive is not initialized\n"); |
| return -EINVAL; |
| } |
| for (i = 0; i < size; i += 2) { |
| if (i + 2 > size) { |
| pr_info("invalid number of input parameters %d\n", size); |
| return -EINVAL; |
| } |
| switch (input[i]) { |
| case 0: |
| freq_setting = SMU_11_0_ODSETTING_GFXCLKFMIN; |
| freq_ptr = &od_table->GfxclkFmin; |
| if (input[i + 1] > od_table->GfxclkFmax) { |
| pr_info("GfxclkFmin (%ld) must be <= GfxclkFmax (%u)!\n", |
| input[i + 1], |
| od_table->GfxclkFmin); |
| return -EINVAL; |
| } |
| break; |
| case 1: |
| freq_setting = SMU_11_0_ODSETTING_GFXCLKFMAX; |
| freq_ptr = &od_table->GfxclkFmax; |
| if (input[i + 1] < od_table->GfxclkFmin) { |
| pr_info("GfxclkFmax (%ld) must be >= GfxclkFmin (%u)!\n", |
| input[i + 1], |
| od_table->GfxclkFmax); |
| return -EINVAL; |
| } |
| break; |
| default: |
| pr_info("Invalid SCLK_VDDC_TABLE index: %ld\n", input[i]); |
| pr_info("Supported indices: [0:min,1:max]\n"); |
| return -EINVAL; |
| } |
| ret = navi10_od_setting_check_range(od_settings, freq_setting, input[i + 1]); |
| if (ret) |
| return ret; |
| *freq_ptr = input[i + 1]; |
| } |
| break; |
| case PP_OD_EDIT_MCLK_VDDC_TABLE: |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_UCLK_MAX)) { |
| pr_warn("UCLK_MAX not supported!\n"); |
| return -ENOTSUPP; |
| } |
| if (size < 2) { |
| pr_info("invalid number of parameters: %d\n", size); |
| return -EINVAL; |
| } |
| if (input[0] != 1) { |
| pr_info("Invalid MCLK_VDDC_TABLE index: %ld\n", input[0]); |
| pr_info("Supported indices: [1:max]\n"); |
| return -EINVAL; |
| } |
| ret = navi10_od_setting_check_range(od_settings, SMU_11_0_ODSETTING_UCLKFMAX, input[1]); |
| if (ret) |
| return ret; |
| od_table->UclkFmax = input[1]; |
| break; |
| case PP_OD_RESTORE_DEFAULT_TABLE: |
| if (!(table_context->overdrive_table && table_context->boot_overdrive_table)) { |
| pr_err("Overdrive table was not initialized!\n"); |
| return -EINVAL; |
| } |
| memcpy(table_context->overdrive_table, table_context->boot_overdrive_table, sizeof(OverDriveTable_t)); |
| break; |
| case PP_OD_COMMIT_DPM_TABLE: |
| navi10_dump_od_table(od_table); |
| ret = smu_update_table(smu, SMU_TABLE_OVERDRIVE, 0, (void *)od_table, true); |
| if (ret) { |
| pr_err("Failed to import overdrive table!\n"); |
| return ret; |
| } |
| // no lock needed because smu_od_edit_dpm_table has it |
| ret = smu_handle_task(smu, smu->smu_dpm.dpm_level, |
| AMD_PP_TASK_READJUST_POWER_STATE, |
| false); |
| if (ret) { |
| return ret; |
| } |
| break; |
| case PP_OD_EDIT_VDDC_CURVE: |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_CURVE)) { |
| pr_warn("GFXCLK_CURVE not supported!\n"); |
| return -ENOTSUPP; |
| } |
| if (size < 3) { |
| pr_info("invalid number of parameters: %d\n", size); |
| return -EINVAL; |
| } |
| if (!od_table) { |
| pr_info("Overdrive is not initialized\n"); |
| return -EINVAL; |
| } |
| |
| switch (input[0]) { |
| case 0: |
| freq_setting = SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P1; |
| voltage_setting = SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P1; |
| freq_ptr = &od_table->GfxclkFreq1; |
| voltage_ptr = &od_table->GfxclkVolt1; |
| break; |
| case 1: |
| freq_setting = SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P2; |
| voltage_setting = SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P2; |
| freq_ptr = &od_table->GfxclkFreq2; |
| voltage_ptr = &od_table->GfxclkVolt2; |
| break; |
| case 2: |
| freq_setting = SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P3; |
| voltage_setting = SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P3; |
| freq_ptr = &od_table->GfxclkFreq3; |
| voltage_ptr = &od_table->GfxclkVolt3; |
| break; |
| default: |
| pr_info("Invalid VDDC_CURVE index: %ld\n", input[0]); |
| pr_info("Supported indices: [0, 1, 2]\n"); |
| return -EINVAL; |
| } |
| ret = navi10_od_setting_check_range(od_settings, freq_setting, input[1]); |
| if (ret) |
| return ret; |
| // Allow setting zero to disable the OverDrive VDDC curve |
| if (input[2] != 0) { |
| ret = navi10_od_setting_check_range(od_settings, voltage_setting, input[2]); |
| if (ret) |
| return ret; |
| *freq_ptr = input[1]; |
| *voltage_ptr = ((uint16_t)input[2]) * NAVI10_VOLTAGE_SCALE; |
| pr_debug("OD: set curve %ld: (%d, %d)\n", input[0], *freq_ptr, *voltage_ptr); |
| } else { |
| // If setting 0, disable all voltage curve settings |
| od_table->GfxclkVolt1 = 0; |
| od_table->GfxclkVolt2 = 0; |
| od_table->GfxclkVolt3 = 0; |
| } |
| navi10_dump_od_table(od_table); |
| break; |
| default: |
| return -ENOSYS; |
| } |
| return ret; |
| } |
| |
| static int navi10_run_btc(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| ret = smu_send_smc_msg(smu, SMU_MSG_RunBtc); |
| if (ret) |
| pr_err("RunBtc failed!\n"); |
| |
| return ret; |
| } |
| |
| static int navi10_dummy_pstate_control(struct smu_context *smu, bool enable) |
| { |
| int result = 0; |
| |
| if (!enable) |
| result = smu_send_smc_msg(smu, SMU_MSG_DAL_DISABLE_DUMMY_PSTATE_CHANGE); |
| else |
| result = smu_send_smc_msg(smu, SMU_MSG_DAL_ENABLE_DUMMY_PSTATE_CHANGE); |
| |
| return result; |
| } |
| |
| static int navi10_disable_umc_cdr_12gbps_workaround(struct smu_context *smu) |
| { |
| uint32_t uclk_count, uclk_min, uclk_max; |
| uint32_t smu_version; |
| int ret = 0; |
| |
| ret = smu_get_smc_version(smu, NULL, &smu_version); |
| if (ret) |
| return ret; |
| |
| /* This workaround is available only for 42.50 or later SMC firmwares */ |
| if (smu_version < 0x2A3200) |
| return 0; |
| |
| ret = smu_get_dpm_level_count(smu, SMU_UCLK, &uclk_count); |
| if (ret) |
| return ret; |
| |
| ret = smu_get_dpm_freq_by_index(smu, SMU_UCLK, (uint16_t)0, &uclk_min); |
| if (ret) |
| return ret; |
| |
| ret = smu_get_dpm_freq_by_index(smu, SMU_UCLK, (uint16_t)(uclk_count - 1), &uclk_max); |
| if (ret) |
| return ret; |
| |
| /* Force UCLK out of the highest DPM */ |
| ret = smu_set_hard_freq_range(smu, SMU_UCLK, 0, uclk_min); |
| if (ret) |
| return ret; |
| |
| /* Revert the UCLK Hardmax */ |
| ret = smu_set_hard_freq_range(smu, SMU_UCLK, 0, uclk_max); |
| if (ret) |
| return ret; |
| |
| /* |
| * In this case, SMU already disabled dummy pstate during enablement |
| * of UCLK DPM, we have to re-enabled it. |
| * */ |
| return navi10_dummy_pstate_control(smu, true); |
| } |
| |
| static const struct pptable_funcs navi10_ppt_funcs = { |
| .tables_init = navi10_tables_init, |
| .alloc_dpm_context = navi10_allocate_dpm_context, |
| .store_powerplay_table = navi10_store_powerplay_table, |
| .check_powerplay_table = navi10_check_powerplay_table, |
| .append_powerplay_table = navi10_append_powerplay_table, |
| .get_smu_msg_index = navi10_get_smu_msg_index, |
| .get_smu_clk_index = navi10_get_smu_clk_index, |
| .get_smu_feature_index = navi10_get_smu_feature_index, |
| .get_smu_table_index = navi10_get_smu_table_index, |
| .get_smu_power_index = navi10_get_pwr_src_index, |
| .get_workload_type = navi10_get_workload_type, |
| .get_allowed_feature_mask = navi10_get_allowed_feature_mask, |
| .set_default_dpm_table = navi10_set_default_dpm_table, |
| .dpm_set_uvd_enable = navi10_dpm_set_uvd_enable, |
| .dpm_set_jpeg_enable = navi10_dpm_set_jpeg_enable, |
| .get_current_clk_freq_by_table = navi10_get_current_clk_freq_by_table, |
| .print_clk_levels = navi10_print_clk_levels, |
| .force_clk_levels = navi10_force_clk_levels, |
| .populate_umd_state_clk = navi10_populate_umd_state_clk, |
| .get_clock_by_type_with_latency = navi10_get_clock_by_type_with_latency, |
| .pre_display_config_changed = navi10_pre_display_config_changed, |
| .display_config_changed = navi10_display_config_changed, |
| .notify_smc_display_config = navi10_notify_smc_display_config, |
| .force_dpm_limit_value = navi10_force_dpm_limit_value, |
| .unforce_dpm_levels = navi10_unforce_dpm_levels, |
| .is_dpm_running = navi10_is_dpm_running, |
| .get_fan_speed_percent = navi10_get_fan_speed_percent, |
| .get_fan_speed_rpm = navi10_get_fan_speed_rpm, |
| .get_power_profile_mode = navi10_get_power_profile_mode, |
| .set_power_profile_mode = navi10_set_power_profile_mode, |
| .get_profiling_clk_mask = navi10_get_profiling_clk_mask, |
| .set_watermarks_table = navi10_set_watermarks_table, |
| .read_sensor = navi10_read_sensor, |
| .get_uclk_dpm_states = navi10_get_uclk_dpm_states, |
| .set_performance_level = navi10_set_performance_level, |
| .get_thermal_temperature_range = navi10_get_thermal_temperature_range, |
| .display_disable_memory_clock_switch = navi10_display_disable_memory_clock_switch, |
| .get_power_limit = navi10_get_power_limit, |
| .update_pcie_parameters = navi10_update_pcie_parameters, |
| .init_microcode = smu_v11_0_init_microcode, |
| .load_microcode = smu_v11_0_load_microcode, |
| .init_smc_tables = smu_v11_0_init_smc_tables, |
| .fini_smc_tables = smu_v11_0_fini_smc_tables, |
| .init_power = smu_v11_0_init_power, |
| .fini_power = smu_v11_0_fini_power, |
| .check_fw_status = smu_v11_0_check_fw_status, |
| .setup_pptable = smu_v11_0_setup_pptable, |
| .get_vbios_bootup_values = smu_v11_0_get_vbios_bootup_values, |
| .get_clk_info_from_vbios = smu_v11_0_get_clk_info_from_vbios, |
| .check_pptable = smu_v11_0_check_pptable, |
| .parse_pptable = smu_v11_0_parse_pptable, |
| .populate_smc_tables = smu_v11_0_populate_smc_pptable, |
| .check_fw_version = smu_v11_0_check_fw_version, |
| .write_pptable = smu_v11_0_write_pptable, |
| .set_min_dcef_deep_sleep = smu_v11_0_set_min_dcef_deep_sleep, |
| .set_driver_table_location = smu_v11_0_set_driver_table_location, |
| .set_tool_table_location = smu_v11_0_set_tool_table_location, |
| .notify_memory_pool_location = smu_v11_0_notify_memory_pool_location, |
| .system_features_control = smu_v11_0_system_features_control, |
| .send_smc_msg_with_param = smu_v11_0_send_msg_with_param, |
| .read_smc_arg = smu_v11_0_read_arg, |
| .init_display_count = smu_v11_0_init_display_count, |
| .set_allowed_mask = smu_v11_0_set_allowed_mask, |
| .get_enabled_mask = smu_v11_0_get_enabled_mask, |
| .notify_display_change = smu_v11_0_notify_display_change, |
| .set_power_limit = smu_v11_0_set_power_limit, |
| .get_current_clk_freq = smu_v11_0_get_current_clk_freq, |
| .init_max_sustainable_clocks = smu_v11_0_init_max_sustainable_clocks, |
| .start_thermal_control = smu_v11_0_start_thermal_control, |
| .stop_thermal_control = smu_v11_0_stop_thermal_control, |
| .set_deep_sleep_dcefclk = smu_v11_0_set_deep_sleep_dcefclk, |
| .display_clock_voltage_request = smu_v11_0_display_clock_voltage_request, |
| .get_fan_control_mode = smu_v11_0_get_fan_control_mode, |
| .set_fan_control_mode = smu_v11_0_set_fan_control_mode, |
| .set_fan_speed_percent = smu_v11_0_set_fan_speed_percent, |
| .set_fan_speed_rpm = smu_v11_0_set_fan_speed_rpm, |
| .set_xgmi_pstate = smu_v11_0_set_xgmi_pstate, |
| .gfx_off_control = smu_v11_0_gfx_off_control, |
| .register_irq_handler = smu_v11_0_register_irq_handler, |
| .set_azalia_d3_pme = smu_v11_0_set_azalia_d3_pme, |
| .get_max_sustainable_clocks_by_dc = smu_v11_0_get_max_sustainable_clocks_by_dc, |
| .baco_is_support= smu_v11_0_baco_is_support, |
| .baco_get_state = smu_v11_0_baco_get_state, |
| .baco_set_state = smu_v11_0_baco_set_state, |
| .baco_enter = smu_v11_0_baco_enter, |
| .baco_exit = smu_v11_0_baco_exit, |
| .get_dpm_ultimate_freq = smu_v11_0_get_dpm_ultimate_freq, |
| .set_soft_freq_limited_range = smu_v11_0_set_soft_freq_limited_range, |
| .override_pcie_parameters = smu_v11_0_override_pcie_parameters, |
| .set_default_od_settings = navi10_set_default_od_settings, |
| .od_edit_dpm_table = navi10_od_edit_dpm_table, |
| .get_pptable_power_limit = navi10_get_pptable_power_limit, |
| .run_btc = navi10_run_btc, |
| .disable_umc_cdr_12gbps_workaround = navi10_disable_umc_cdr_12gbps_workaround, |
| }; |
| |
| void navi10_set_ppt_funcs(struct smu_context *smu) |
| { |
| smu->ppt_funcs = &navi10_ppt_funcs; |
| } |