| /* |
| * OMAP2plus display device setup / initialization. |
| * |
| * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/ |
| * Senthilvadivu Guruswamy |
| * Sumit Semwal |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/string.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/slab.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/platform_data/omapdss.h> |
| #include "omap_hwmod.h" |
| #include "omap_device.h" |
| #include "common.h" |
| |
| #include "soc.h" |
| #include "iomap.h" |
| #include "control.h" |
| #include "display.h" |
| #include "prm.h" |
| |
| #define DISPC_CONTROL 0x0040 |
| #define DISPC_CONTROL2 0x0238 |
| #define DISPC_CONTROL3 0x0848 |
| #define DISPC_IRQSTATUS 0x0018 |
| |
| #define DSS_CONTROL 0x40 |
| #define DSS_SDI_CONTROL 0x44 |
| #define DSS_PLL_CONTROL 0x48 |
| |
| #define LCD_EN_MASK (0x1 << 0) |
| #define DIGIT_EN_MASK (0x1 << 1) |
| |
| #define FRAMEDONE_IRQ_SHIFT 0 |
| #define EVSYNC_EVEN_IRQ_SHIFT 2 |
| #define EVSYNC_ODD_IRQ_SHIFT 3 |
| #define FRAMEDONE2_IRQ_SHIFT 22 |
| #define FRAMEDONE3_IRQ_SHIFT 30 |
| #define FRAMEDONETV_IRQ_SHIFT 24 |
| |
| /* |
| * FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC |
| * reset before deciding that something has gone wrong |
| */ |
| #define FRAMEDONE_IRQ_TIMEOUT 100 |
| |
| #if defined(CONFIG_FB_OMAP2) |
| static struct platform_device omap_display_device = { |
| .name = "omapdss", |
| .id = -1, |
| .dev = { |
| .platform_data = NULL, |
| }, |
| }; |
| |
| #define OMAP4_DSIPHY_SYSCON_OFFSET 0x78 |
| |
| static struct regmap *omap4_dsi_mux_syscon; |
| |
| static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) |
| { |
| u32 enable_mask, enable_shift; |
| u32 pipd_mask, pipd_shift; |
| u32 reg; |
| int ret; |
| |
| if (dsi_id == 0) { |
| enable_mask = OMAP4_DSI1_LANEENABLE_MASK; |
| enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT; |
| pipd_mask = OMAP4_DSI1_PIPD_MASK; |
| pipd_shift = OMAP4_DSI1_PIPD_SHIFT; |
| } else if (dsi_id == 1) { |
| enable_mask = OMAP4_DSI2_LANEENABLE_MASK; |
| enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT; |
| pipd_mask = OMAP4_DSI2_PIPD_MASK; |
| pipd_shift = OMAP4_DSI2_PIPD_SHIFT; |
| } else { |
| return -ENODEV; |
| } |
| |
| ret = regmap_read(omap4_dsi_mux_syscon, |
| OMAP4_DSIPHY_SYSCON_OFFSET, |
| ®); |
| if (ret) |
| return ret; |
| |
| reg &= ~enable_mask; |
| reg &= ~pipd_mask; |
| |
| reg |= (lanes << enable_shift) & enable_mask; |
| reg |= (lanes << pipd_shift) & pipd_mask; |
| |
| regmap_write(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, reg); |
| |
| return 0; |
| } |
| |
| static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) |
| { |
| if (cpu_is_omap44xx()) |
| return omap4_dsi_mux_pads(dsi_id, lane_mask); |
| |
| return 0; |
| } |
| |
| static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) |
| { |
| if (cpu_is_omap44xx()) |
| omap4_dsi_mux_pads(dsi_id, 0); |
| } |
| |
| static enum omapdss_version __init omap_display_get_version(void) |
| { |
| if (cpu_is_omap24xx()) |
| return OMAPDSS_VER_OMAP24xx; |
| else if (cpu_is_omap3630()) |
| return OMAPDSS_VER_OMAP3630; |
| else if (cpu_is_omap34xx()) { |
| if (soc_is_am35xx()) { |
| return OMAPDSS_VER_AM35xx; |
| } else { |
| if (omap_rev() < OMAP3430_REV_ES3_0) |
| return OMAPDSS_VER_OMAP34xx_ES1; |
| else |
| return OMAPDSS_VER_OMAP34xx_ES3; |
| } |
| } else if (omap_rev() == OMAP4430_REV_ES1_0) |
| return OMAPDSS_VER_OMAP4430_ES1; |
| else if (omap_rev() == OMAP4430_REV_ES2_0 || |
| omap_rev() == OMAP4430_REV_ES2_1 || |
| omap_rev() == OMAP4430_REV_ES2_2) |
| return OMAPDSS_VER_OMAP4430_ES2; |
| else if (cpu_is_omap44xx()) |
| return OMAPDSS_VER_OMAP4; |
| else if (soc_is_omap54xx()) |
| return OMAPDSS_VER_OMAP5; |
| else if (soc_is_am43xx()) |
| return OMAPDSS_VER_AM43xx; |
| else if (soc_is_dra7xx()) |
| return OMAPDSS_VER_DRA7xx; |
| else |
| return OMAPDSS_VER_UNKNOWN; |
| } |
| |
| static int __init omapdss_init_fbdev(void) |
| { |
| static struct omap_dss_board_info board_data = { |
| .dsi_enable_pads = omap_dsi_enable_pads, |
| .dsi_disable_pads = omap_dsi_disable_pads, |
| }; |
| struct device_node *node; |
| int r; |
| |
| board_data.version = omap_display_get_version(); |
| if (board_data.version == OMAPDSS_VER_UNKNOWN) { |
| pr_err("DSS not supported on this SoC\n"); |
| return -ENODEV; |
| } |
| |
| omap_display_device.dev.platform_data = &board_data; |
| |
| r = platform_device_register(&omap_display_device); |
| if (r < 0) { |
| pr_err("Unable to register omapdss device\n"); |
| return r; |
| } |
| |
| /* create vrfb device */ |
| r = omap_init_vrfb(); |
| if (r < 0) { |
| pr_err("Unable to register omapvrfb device\n"); |
| return r; |
| } |
| |
| /* create FB device */ |
| r = omap_init_fb(); |
| if (r < 0) { |
| pr_err("Unable to register omapfb device\n"); |
| return r; |
| } |
| |
| /* create V4L2 display device */ |
| r = omap_init_vout(); |
| if (r < 0) { |
| pr_err("Unable to register omap_vout device\n"); |
| return r; |
| } |
| |
| /* add DSI info for omap4 */ |
| node = of_find_node_by_name(NULL, "omap4_padconf_global"); |
| if (node) |
| omap4_dsi_mux_syscon = syscon_node_to_regmap(node); |
| |
| return 0; |
| } |
| |
| static const char * const omapdss_compat_names[] __initconst = { |
| "ti,omap2-dss", |
| "ti,omap3-dss", |
| "ti,omap4-dss", |
| "ti,omap5-dss", |
| "ti,dra7-dss", |
| }; |
| |
| static struct device_node * __init omapdss_find_dss_of_node(void) |
| { |
| struct device_node *node; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(omapdss_compat_names); ++i) { |
| node = of_find_compatible_node(NULL, NULL, |
| omapdss_compat_names[i]); |
| if (node) |
| return node; |
| } |
| |
| return NULL; |
| } |
| |
| static int __init omapdss_init_of(void) |
| { |
| int r; |
| struct device_node *node; |
| struct platform_device *pdev; |
| |
| /* only create dss helper devices if dss is enabled in the .dts */ |
| |
| node = omapdss_find_dss_of_node(); |
| if (!node) |
| return 0; |
| |
| if (!of_device_is_available(node)) { |
| of_node_put(node); |
| return 0; |
| } |
| |
| pdev = of_find_device_by_node(node); |
| |
| if (!pdev) { |
| pr_err("Unable to find DSS platform device\n"); |
| return -ENODEV; |
| } |
| |
| r = of_platform_populate(node, NULL, NULL, &pdev->dev); |
| put_device(&pdev->dev); |
| if (r) { |
| pr_err("Unable to populate DSS submodule devices\n"); |
| return r; |
| } |
| |
| return omapdss_init_fbdev(); |
| } |
| omap_device_initcall(omapdss_init_of); |
| #endif /* CONFIG_FB_OMAP2 */ |
| |
| static void dispc_disable_outputs(void) |
| { |
| u32 v, irq_mask = 0; |
| bool lcd_en, digit_en, lcd2_en = false, lcd3_en = false; |
| int i; |
| struct omap_dss_dispc_dev_attr *da; |
| struct omap_hwmod *oh; |
| |
| oh = omap_hwmod_lookup("dss_dispc"); |
| if (!oh) { |
| WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n"); |
| return; |
| } |
| |
| if (!oh->dev_attr) { |
| pr_err("display: could not disable outputs during reset due to missing dev_attr\n"); |
| return; |
| } |
| |
| da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr; |
| |
| /* store value of LCDENABLE and DIGITENABLE bits */ |
| v = omap_hwmod_read(oh, DISPC_CONTROL); |
| lcd_en = v & LCD_EN_MASK; |
| digit_en = v & DIGIT_EN_MASK; |
| |
| /* store value of LCDENABLE for LCD2 */ |
| if (da->manager_count > 2) { |
| v = omap_hwmod_read(oh, DISPC_CONTROL2); |
| lcd2_en = v & LCD_EN_MASK; |
| } |
| |
| /* store value of LCDENABLE for LCD3 */ |
| if (da->manager_count > 3) { |
| v = omap_hwmod_read(oh, DISPC_CONTROL3); |
| lcd3_en = v & LCD_EN_MASK; |
| } |
| |
| if (!(lcd_en | digit_en | lcd2_en | lcd3_en)) |
| return; /* no managers currently enabled */ |
| |
| /* |
| * If any manager was enabled, we need to disable it before |
| * DSS clocks are disabled or DISPC module is reset |
| */ |
| if (lcd_en) |
| irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT; |
| |
| if (digit_en) { |
| if (da->has_framedonetv_irq) { |
| irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT; |
| } else { |
| irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT | |
| 1 << EVSYNC_ODD_IRQ_SHIFT; |
| } |
| } |
| |
| if (lcd2_en) |
| irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT; |
| if (lcd3_en) |
| irq_mask |= 1 << FRAMEDONE3_IRQ_SHIFT; |
| |
| /* |
| * clear any previous FRAMEDONE, FRAMEDONETV, |
| * EVSYNC_EVEN/ODD, FRAMEDONE2 or FRAMEDONE3 interrupts |
| */ |
| omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS); |
| |
| /* disable LCD and TV managers */ |
| v = omap_hwmod_read(oh, DISPC_CONTROL); |
| v &= ~(LCD_EN_MASK | DIGIT_EN_MASK); |
| omap_hwmod_write(v, oh, DISPC_CONTROL); |
| |
| /* disable LCD2 manager */ |
| if (da->manager_count > 2) { |
| v = omap_hwmod_read(oh, DISPC_CONTROL2); |
| v &= ~LCD_EN_MASK; |
| omap_hwmod_write(v, oh, DISPC_CONTROL2); |
| } |
| |
| /* disable LCD3 manager */ |
| if (da->manager_count > 3) { |
| v = omap_hwmod_read(oh, DISPC_CONTROL3); |
| v &= ~LCD_EN_MASK; |
| omap_hwmod_write(v, oh, DISPC_CONTROL3); |
| } |
| |
| i = 0; |
| while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) != |
| irq_mask) { |
| i++; |
| if (i > FRAMEDONE_IRQ_TIMEOUT) { |
| pr_err("didn't get FRAMEDONE1/2/3 or TV interrupt\n"); |
| break; |
| } |
| mdelay(1); |
| } |
| } |
| |
| int omap_dss_reset(struct omap_hwmod *oh) |
| { |
| struct omap_hwmod_opt_clk *oc; |
| int c = 0; |
| int i, r; |
| |
| if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) { |
| pr_err("dss_core: hwmod data doesn't contain reset data\n"); |
| return -EINVAL; |
| } |
| |
| for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) |
| clk_prepare_enable(oc->_clk); |
| |
| dispc_disable_outputs(); |
| |
| /* clear SDI registers */ |
| if (cpu_is_omap3430()) { |
| omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL); |
| omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL); |
| } |
| |
| /* |
| * clear DSS_CONTROL register to switch DSS clock sources to |
| * PRCM clock, if any |
| */ |
| omap_hwmod_write(0x0, oh, DSS_CONTROL); |
| |
| omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs) |
| & SYSS_RESETDONE_MASK), |
| MAX_MODULE_SOFTRESET_WAIT, c); |
| |
| if (c == MAX_MODULE_SOFTRESET_WAIT) |
| pr_warn("dss_core: waiting for reset to finish failed\n"); |
| else |
| pr_debug("dss_core: softreset done\n"); |
| |
| for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) |
| clk_disable_unprepare(oc->_clk); |
| |
| r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0; |
| |
| return r; |
| } |