blob: 871ccbba445bbec599febd91eaad76dcc6a79dbb [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
*/
/dts-v1/;
#include "sm6125.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/gpio-keys.h>
/ {
/* required for bootloader to select correct board */
qcom,msm-id = <394 0x10000>; /* sm6125 v1 */
qcom,board-id = <34 0>;
model = "Sony Xperia 10 II";
compatible = "sony,pdx201", "qcom,sm6125";
chassis-type = "handset";
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
framebuffer0: framebuffer@5c000000 {
compatible = "simple-framebuffer";
reg = <0 0x5c000000 0 (2520 * 1080 * 4)>;
width = <1080>;
height = <2520>;
stride = <(1080 * 4)>;
format = "a8r8g8b8";
};
};
extcon_usb: extcon-usb {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
};
gpio-keys {
status = "okay";
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
vol-dn {
label = "Volume Down";
gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
gpio-key,wakeup;
debounce-interval = <15>;
};
};
reserved_memory {
#address-cells = <2>;
#size-cells = <2>;
debug_mem: memory@ffb00000 {
reg = <0x0 0xffb00000 0x0 0xc0000>;
no-map;
};
last_log_mem: memory@ffbc0000 {
reg = <0x0 0xffbc0000 0x0 0x80000>;
no-map;
};
pstore_mem: ramoops@ffc00000 {
compatible = "ramoops";
reg = <0x0 0xffc40000 0x0 0xc0000>;
record-size = <0x1000>;
console-size = <0x40000>;
msg-size = <0x20000 0x20000>;
};
cmdline_mem: memory@ffd00000 {
reg = <0x0 0xffd40000 0x0 0x1000>;
no-map;
};
};
};
&hsusb_phy1 {
status = "okay";
};
&sdc2_state_off {
sd-cd {
pins = "gpio98";
bias-disable;
drive-strength = <2>;
};
};
&sdhc_1 {
status = "okay";
};
&tlmm {
gpio-reserved-ranges = <22 2>, <28 6>;
sdc2_state_on: sdc2-on {
clk {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
cmd {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
data {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
sd-cd {
pins = "gpio98";
bias-pull-up;
drive-strength = <2>;
};
};
};
&usb3 {
status = "okay";
};
&usb3_dwc3 {
extcon = <&extcon_usb>;
};