| // SPDX-License-Identifier: GPL-2.0 OR X11 |
| /* |
| * Copyright (C) 2015 Amarula Solutions B.V. |
| * Copyright (C) 2015 Engicam S.r.l. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/clock/imx6qdl-clock.h> |
| #include <dt-bindings/sound/fsl-imx-audmux.h> |
| |
| / { |
| memory@10000000 { |
| device_type = "memory"; |
| reg = <0x10000000 0x80000000>; |
| }; |
| |
| reg_1p8v: regulator-1p8v { |
| compatible = "regulator-fixed"; |
| regulator-name = "1P8V"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_2p5v: regulator-2p5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "2P5V"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_3p3v: regulator-3p3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "3P3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_sd3_vmmc: regulator-sd3-vmmc { |
| compatible = "regulator-fixed"; |
| regulator-name = "P3V3_SD3_SWITCHED"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| enable-active-high; |
| }; |
| |
| reg_sd4_vmmc: regulator-sd4-vmmc { |
| compatible = "regulator-fixed"; |
| regulator-name = "P3V3_SD4_SWITCHED"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_usb_h1_vbus: regulator-usb-h1-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_h1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_usb_otg_vbus: regulator-usb-otg-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_otg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| usb_hub: usb-hub { |
| compatible = "smsc,usb3503a"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbhub>; |
| reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
| clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>; |
| clock-names = "refclk"; |
| }; |
| |
| sound { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "imx6qdl-icore-rqs-sgtl5000"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,bitclock-master = <&dailink_master>; |
| simple-audio-card,frame-master = <&dailink_master>; |
| simple-audio-card,widgets = |
| "Microphone", "Mic Jack", |
| "Headphone", "Headphone Jack", |
| "Line", "Line In Jack", |
| "Speaker", "Line Out Jack", |
| "Speaker", "Ext Spk"; |
| simple-audio-card,routing = |
| "MIC_IN", "Mic Jack", |
| "Mic Jack", "Mic Bias", |
| "Headphone Jack", "HP_OUT"; |
| |
| simple-audio-card,cpu { |
| sound-dai = <&ssi1>; |
| }; |
| |
| dailink_master: simple-audio-card,codec { |
| sound-dai = <&sgtl5000>; |
| }; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux>; |
| status = "okay"; |
| |
| audmux_ssi1 { |
| fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>; |
| fsl,port-config = < |
| (IMX_AUDMUX_V2_PTCR_TFSDIR | |
| IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) | |
| IMX_AUDMUX_V2_PTCR_TCLKDIR | |
| IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) | |
| IMX_AUDMUX_V2_PTCR_SYN) |
| IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4) |
| >; |
| }; |
| |
| audmux_aud4 { |
| fsl,audmux-port = <MX51_AUDMUX_PORT4>; |
| fsl,port-config = < |
| IMX_AUDMUX_V2_PTCR_SYN |
| IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0) |
| >; |
| }; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_can1>; |
| xceiver-supply = <®_3p3v>; |
| status = "okay"; |
| }; |
| |
| &can2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_can2>; |
| xceiver-supply = <®_3p3v>; |
| status = "okay"; |
| }; |
| |
| &clks { |
| assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>; |
| assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet>; |
| phy-handle = <ð_phy>; |
| phy-mode = "rgmii"; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eth_phy: ethernet-phy@0 { |
| reg = <0x0>; |
| rxc-skew-ps = <1140>; |
| txc-skew-ps = <1140>; |
| txen-skew-ps = <600>; |
| rxdv-skew-ps = <240>; |
| rxd0-skew-ps = <420>; |
| rxd1-skew-ps = <600>; |
| rxd2-skew-ps = <420>; |
| rxd3-skew-ps = <240>; |
| txd0-skew-ps = <60>; |
| txd1-skew-ps = <60>; |
| txd2-skew-ps = <60>; |
| txd3-skew-ps = <240>; |
| }; |
| }; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| }; |
| |
| &i2c3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| |
| sgtl5000: codec@a { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,sgtl5000"; |
| reg = <0x0a>; |
| clocks = <&clks IMX6QDL_CLK_CKO>; |
| VDDA-supply = <®_2p5v>; |
| VDDIO-supply = <®_3p3v>; |
| VDDD-supply = <®_1p8v>; |
| }; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie>; |
| reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &ssi1 { |
| fsl,mode = "i2s-slave"; |
| status = "okay"; |
| }; |
| |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| vbus-supply = <®_usb_h1_vbus>; |
| disable-over-current; |
| clocks = <&clks IMX6QDL_CLK_USBOH3>; |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| vbus-supply = <®_usb_otg_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg>; |
| disable-over-current; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| no-1-8-v; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| vmcc-supply = <®_sd3_vmmc>; |
| cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; |
| bus-witdh = <4>; |
| no-1-8-v; |
| status = "okay"; |
| }; |
| |
| &usdhc4 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc4>; |
| pinctrl-1 = <&pinctrl_usdhc4_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc4_200mhz>; |
| vmcc-supply = <®_sd4_vmmc>; |
| bus-witdh = <8>; |
| no-1-8-v; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_audmux: audmuxgrp { |
| fsl,pins = < |
| MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 |
| MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 |
| MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 |
| MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 |
| >; |
| }; |
| |
| pinctrl_enet: enetgrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 |
| MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 |
| MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 |
| MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 |
| MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 |
| MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 |
| MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 |
| MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
| MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_can1: can1grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020 |
| MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020 |
| >; |
| }; |
| |
| pinctrl_can2: can2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020 |
| MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 |
| MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 |
| MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 |
| MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 |
| >; |
| }; |
| |
| pinctrl_pcie: pciegrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f059 /* PCIe Reset */ |
| >; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usbhub: usbhubgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1f059 /* HUB USB Reset */ |
| >; |
| }; |
| |
| pinctrl_usbotg: usbotggrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 |
| MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 |
| MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 |
| MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 |
| MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 |
| MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17070 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10070 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070 |
| MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1f059 /* CD */ |
| MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f059 /* PWR */ |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B1 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B1 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B1 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B1 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B1 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B1 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9 |
| >; |
| }; |
| |
| pinctrl_usdhc4: usdhc4grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17070 |
| MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10070 |
| MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070 |
| MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070 |
| MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070 |
| MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070 |
| MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070 |
| MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070 |
| MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070 |
| MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070 |
| >; |
| }; |
| |
| pinctrl_usdhc4_100mhz: usdhc4grp_100mhz { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170B1 |
| MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100B1 |
| MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170B1 |
| MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170B1 |
| MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170B1 |
| MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170B1 |
| MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170B1 |
| MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170B1 |
| MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170B1 |
| MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170B1 |
| >; |
| }; |
| |
| pinctrl_usdhc4_200mhz: usdhc4grp_200mhz { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170F9 |
| MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100F9 |
| MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170F9 |
| MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170F9 |
| MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170F9 |
| MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170F9 |
| MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170F9 |
| MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170F9 |
| MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170F9 |
| MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170F9 |
| >; |
| }; |
| }; |
