| /* |
| * Copyright 2015 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: AMD |
| * |
| */ |
| |
| /* The caprices of the preprocessor require that this be declared right here */ |
| #define CREATE_TRACE_POINTS |
| |
| #include "dm_services_types.h" |
| #include "dc.h" |
| #include "dc/inc/core_types.h" |
| |
| #include "vid.h" |
| #include "amdgpu.h" |
| #include "amdgpu_display.h" |
| #include "amdgpu_ucode.h" |
| #include "atom.h" |
| #include "amdgpu_dm.h" |
| #include "amdgpu_pm.h" |
| |
| #include "amd_shared.h" |
| #include "amdgpu_dm_irq.h" |
| #include "dm_helpers.h" |
| #include "amdgpu_dm_mst_types.h" |
| #if defined(CONFIG_DEBUG_FS) |
| #include "amdgpu_dm_debugfs.h" |
| #endif |
| |
| #include "ivsrcid/ivsrcid_vislands30.h" |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/version.h> |
| #include <linux/types.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/firmware.h> |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_uapi.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_dp_mst_helper.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_edid.h> |
| |
| #if defined(CONFIG_DRM_AMD_DC_DCN1_0) |
| #include "ivsrcid/irqsrcs_dcn_1_0.h" |
| |
| #include "dcn/dcn_1_0_offset.h" |
| #include "dcn/dcn_1_0_sh_mask.h" |
| #include "soc15_hw_ip.h" |
| #include "vega10_ip_offset.h" |
| |
| #include "soc15_common.h" |
| #endif |
| |
| #include "modules/inc/mod_freesync.h" |
| #include "modules/power/power_helpers.h" |
| #include "modules/inc/mod_info_packet.h" |
| |
| #define FIRMWARE_RAVEN_DMCU "amdgpu/raven_dmcu.bin" |
| MODULE_FIRMWARE(FIRMWARE_RAVEN_DMCU); |
| |
| /** |
| * DOC: overview |
| * |
| * The AMDgpu display manager, **amdgpu_dm** (or even simpler, |
| * **dm**) sits between DRM and DC. It acts as a liason, converting DRM |
| * requests into DC requests, and DC responses into DRM responses. |
| * |
| * The root control structure is &struct amdgpu_display_manager. |
| */ |
| |
| /* basic init/fini API */ |
| static int amdgpu_dm_init(struct amdgpu_device *adev); |
| static void amdgpu_dm_fini(struct amdgpu_device *adev); |
| |
| /* |
| * initializes drm_device display related structures, based on the information |
| * provided by DAL. The drm strcutures are: drm_crtc, drm_connector, |
| * drm_encoder, drm_mode_config |
| * |
| * Returns 0 on success |
| */ |
| static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev); |
| /* removes and deallocates the drm structures, created by the above function */ |
| static void amdgpu_dm_destroy_drm_device(struct amdgpu_display_manager *dm); |
| |
| static void |
| amdgpu_dm_update_connector_after_detect(struct amdgpu_dm_connector *aconnector); |
| |
| static int amdgpu_dm_plane_init(struct amdgpu_display_manager *dm, |
| struct drm_plane *plane, |
| unsigned long possible_crtcs); |
| static int amdgpu_dm_crtc_init(struct amdgpu_display_manager *dm, |
| struct drm_plane *plane, |
| uint32_t link_index); |
| static int amdgpu_dm_connector_init(struct amdgpu_display_manager *dm, |
| struct amdgpu_dm_connector *amdgpu_dm_connector, |
| uint32_t link_index, |
| struct amdgpu_encoder *amdgpu_encoder); |
| static int amdgpu_dm_encoder_init(struct drm_device *dev, |
| struct amdgpu_encoder *aencoder, |
| uint32_t link_index); |
| |
| static int amdgpu_dm_connector_get_modes(struct drm_connector *connector); |
| |
| static int amdgpu_dm_atomic_commit(struct drm_device *dev, |
| struct drm_atomic_state *state, |
| bool nonblock); |
| |
| static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state); |
| |
| static int amdgpu_dm_atomic_check(struct drm_device *dev, |
| struct drm_atomic_state *state); |
| |
| static void handle_cursor_update(struct drm_plane *plane, |
| struct drm_plane_state *old_plane_state); |
| |
| |
| |
| static const enum drm_plane_type dm_plane_type_default[AMDGPU_MAX_PLANES] = { |
| DRM_PLANE_TYPE_PRIMARY, |
| DRM_PLANE_TYPE_PRIMARY, |
| DRM_PLANE_TYPE_PRIMARY, |
| DRM_PLANE_TYPE_PRIMARY, |
| DRM_PLANE_TYPE_PRIMARY, |
| DRM_PLANE_TYPE_PRIMARY, |
| }; |
| |
| static const enum drm_plane_type dm_plane_type_carizzo[AMDGPU_MAX_PLANES] = { |
| DRM_PLANE_TYPE_PRIMARY, |
| DRM_PLANE_TYPE_PRIMARY, |
| DRM_PLANE_TYPE_PRIMARY, |
| DRM_PLANE_TYPE_OVERLAY,/* YUV Capable Underlay */ |
| }; |
| |
| static const enum drm_plane_type dm_plane_type_stoney[AMDGPU_MAX_PLANES] = { |
| DRM_PLANE_TYPE_PRIMARY, |
| DRM_PLANE_TYPE_PRIMARY, |
| DRM_PLANE_TYPE_OVERLAY, /* YUV Capable Underlay */ |
| }; |
| |
| /* |
| * dm_vblank_get_counter |
| * |
| * @brief |
| * Get counter for number of vertical blanks |
| * |
| * @param |
| * struct amdgpu_device *adev - [in] desired amdgpu device |
| * int disp_idx - [in] which CRTC to get the counter from |
| * |
| * @return |
| * Counter for vertical blanks |
| */ |
| static u32 dm_vblank_get_counter(struct amdgpu_device *adev, int crtc) |
| { |
| if (crtc >= adev->mode_info.num_crtc) |
| return 0; |
| else { |
| struct amdgpu_crtc *acrtc = adev->mode_info.crtcs[crtc]; |
| struct dm_crtc_state *acrtc_state = to_dm_crtc_state( |
| acrtc->base.state); |
| |
| |
| if (acrtc_state->stream == NULL) { |
| DRM_ERROR("dc_stream_state is NULL for crtc '%d'!\n", |
| crtc); |
| return 0; |
| } |
| |
| return dc_stream_get_vblank_counter(acrtc_state->stream); |
| } |
| } |
| |
| static int dm_crtc_get_scanoutpos(struct amdgpu_device *adev, int crtc, |
| u32 *vbl, u32 *position) |
| { |
| uint32_t v_blank_start, v_blank_end, h_position, v_position; |
| |
| if ((crtc < 0) || (crtc >= adev->mode_info.num_crtc)) |
| return -EINVAL; |
| else { |
| struct amdgpu_crtc *acrtc = adev->mode_info.crtcs[crtc]; |
| struct dm_crtc_state *acrtc_state = to_dm_crtc_state( |
| acrtc->base.state); |
| |
| if (acrtc_state->stream == NULL) { |
| DRM_ERROR("dc_stream_state is NULL for crtc '%d'!\n", |
| crtc); |
| return 0; |
| } |
| |
| /* |
| * TODO rework base driver to use values directly. |
| * for now parse it back into reg-format |
| */ |
| dc_stream_get_scanoutpos(acrtc_state->stream, |
| &v_blank_start, |
| &v_blank_end, |
| &h_position, |
| &v_position); |
| |
| *position = v_position | (h_position << 16); |
| *vbl = v_blank_start | (v_blank_end << 16); |
| } |
| |
| return 0; |
| } |
| |
| static bool dm_is_idle(void *handle) |
| { |
| /* XXX todo */ |
| return true; |
| } |
| |
| static int dm_wait_for_idle(void *handle) |
| { |
| /* XXX todo */ |
| return 0; |
| } |
| |
| static bool dm_check_soft_reset(void *handle) |
| { |
| return false; |
| } |
| |
| static int dm_soft_reset(void *handle) |
| { |
| /* XXX todo */ |
| return 0; |
| } |
| |
| static struct amdgpu_crtc * |
| get_crtc_by_otg_inst(struct amdgpu_device *adev, |
| int otg_inst) |
| { |
| struct drm_device *dev = adev->ddev; |
| struct drm_crtc *crtc; |
| struct amdgpu_crtc *amdgpu_crtc; |
| |
| if (otg_inst == -1) { |
| WARN_ON(1); |
| return adev->mode_info.crtcs[0]; |
| } |
| |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { |
| amdgpu_crtc = to_amdgpu_crtc(crtc); |
| |
| if (amdgpu_crtc->otg_inst == otg_inst) |
| return amdgpu_crtc; |
| } |
| |
| return NULL; |
| } |
| |
| static void dm_pflip_high_irq(void *interrupt_params) |
| { |
| struct amdgpu_crtc *amdgpu_crtc; |
| struct common_irq_params *irq_params = interrupt_params; |
| struct amdgpu_device *adev = irq_params->adev; |
| unsigned long flags; |
| |
| amdgpu_crtc = get_crtc_by_otg_inst(adev, irq_params->irq_src - IRQ_TYPE_PFLIP); |
| |
| /* IRQ could occur when in initial stage */ |
| /* TODO work and BO cleanup */ |
| if (amdgpu_crtc == NULL) { |
| DRM_DEBUG_DRIVER("CRTC is null, returning.\n"); |
| return; |
| } |
| |
| spin_lock_irqsave(&adev->ddev->event_lock, flags); |
| |
| if (amdgpu_crtc->pflip_status != AMDGPU_FLIP_SUBMITTED){ |
| DRM_DEBUG_DRIVER("amdgpu_crtc->pflip_status = %d !=AMDGPU_FLIP_SUBMITTED(%d) on crtc:%d[%p] \n", |
| amdgpu_crtc->pflip_status, |
| AMDGPU_FLIP_SUBMITTED, |
| amdgpu_crtc->crtc_id, |
| amdgpu_crtc); |
| spin_unlock_irqrestore(&adev->ddev->event_lock, flags); |
| return; |
| } |
| |
| |
| /* wake up userspace */ |
| if (amdgpu_crtc->event) { |
| /* Update to correct count(s) if racing with vblank irq */ |
| drm_crtc_accurate_vblank_count(&amdgpu_crtc->base); |
| |
| drm_crtc_send_vblank_event(&amdgpu_crtc->base, amdgpu_crtc->event); |
| |
| /* page flip completed. clean up */ |
| amdgpu_crtc->event = NULL; |
| |
| } else |
| WARN_ON(1); |
| |
| amdgpu_crtc->pflip_status = AMDGPU_FLIP_NONE; |
| spin_unlock_irqrestore(&adev->ddev->event_lock, flags); |
| |
| DRM_DEBUG_DRIVER("%s - crtc :%d[%p], pflip_stat:AMDGPU_FLIP_NONE\n", |
| __func__, amdgpu_crtc->crtc_id, amdgpu_crtc); |
| |
| drm_crtc_vblank_put(&amdgpu_crtc->base); |
| } |
| |
| static void dm_crtc_high_irq(void *interrupt_params) |
| { |
| struct common_irq_params *irq_params = interrupt_params; |
| struct amdgpu_device *adev = irq_params->adev; |
| struct amdgpu_crtc *acrtc; |
| struct dm_crtc_state *acrtc_state; |
| |
| acrtc = get_crtc_by_otg_inst(adev, irq_params->irq_src - IRQ_TYPE_VBLANK); |
| |
| if (acrtc) { |
| drm_crtc_handle_vblank(&acrtc->base); |
| amdgpu_dm_crtc_handle_crc_irq(&acrtc->base); |
| |
| acrtc_state = to_dm_crtc_state(acrtc->base.state); |
| |
| if (acrtc_state->stream && |
| acrtc_state->vrr_params.supported && |
| acrtc_state->freesync_config.state == VRR_STATE_ACTIVE_VARIABLE) { |
| mod_freesync_handle_v_update( |
| adev->dm.freesync_module, |
| acrtc_state->stream, |
| &acrtc_state->vrr_params); |
| |
| dc_stream_adjust_vmin_vmax( |
| adev->dm.dc, |
| acrtc_state->stream, |
| &acrtc_state->vrr_params.adjust); |
| } |
| } |
| } |
| |
| static int dm_set_clockgating_state(void *handle, |
| enum amd_clockgating_state state) |
| { |
| return 0; |
| } |
| |
| static int dm_set_powergating_state(void *handle, |
| enum amd_powergating_state state) |
| { |
| return 0; |
| } |
| |
| /* Prototypes of private functions */ |
| static int dm_early_init(void* handle); |
| |
| /* Allocate memory for FBC compressed data */ |
| static void amdgpu_dm_fbc_init(struct drm_connector *connector) |
| { |
| struct drm_device *dev = connector->dev; |
| struct amdgpu_device *adev = dev->dev_private; |
| struct dm_comressor_info *compressor = &adev->dm.compressor; |
| struct amdgpu_dm_connector *aconn = to_amdgpu_dm_connector(connector); |
| struct drm_display_mode *mode; |
| unsigned long max_size = 0; |
| |
| if (adev->dm.dc->fbc_compressor == NULL) |
| return; |
| |
| if (aconn->dc_link->connector_signal != SIGNAL_TYPE_EDP) |
| return; |
| |
| if (compressor->bo_ptr) |
| return; |
| |
| |
| list_for_each_entry(mode, &connector->modes, head) { |
| if (max_size < mode->htotal * mode->vtotal) |
| max_size = mode->htotal * mode->vtotal; |
| } |
| |
| if (max_size) { |
| int r = amdgpu_bo_create_kernel(adev, max_size * 4, PAGE_SIZE, |
| AMDGPU_GEM_DOMAIN_GTT, &compressor->bo_ptr, |
| &compressor->gpu_addr, &compressor->cpu_addr); |
| |
| if (r) |
| DRM_ERROR("DM: Failed to initialize FBC\n"); |
| else { |
| adev->dm.dc->ctx->fbc_gpu_addr = compressor->gpu_addr; |
| DRM_INFO("DM: FBC alloc %lu\n", max_size*4); |
| } |
| |
| } |
| |
| } |
| |
| static int amdgpu_dm_init(struct amdgpu_device *adev) |
| { |
| struct dc_init_data init_data; |
| adev->dm.ddev = adev->ddev; |
| adev->dm.adev = adev; |
| |
| /* Zero all the fields */ |
| memset(&init_data, 0, sizeof(init_data)); |
| |
| mutex_init(&adev->dm.dc_lock); |
| |
| if(amdgpu_dm_irq_init(adev)) { |
| DRM_ERROR("amdgpu: failed to initialize DM IRQ support.\n"); |
| goto error; |
| } |
| |
| init_data.asic_id.chip_family = adev->family; |
| |
| init_data.asic_id.pci_revision_id = adev->rev_id; |
| init_data.asic_id.hw_internal_rev = adev->external_rev_id; |
| |
| init_data.asic_id.vram_width = adev->gmc.vram_width; |
| /* TODO: initialize init_data.asic_id.vram_type here!!!! */ |
| init_data.asic_id.atombios_base_address = |
| adev->mode_info.atom_context->bios; |
| |
| init_data.driver = adev; |
| |
| adev->dm.cgs_device = amdgpu_cgs_create_device(adev); |
| |
| if (!adev->dm.cgs_device) { |
| DRM_ERROR("amdgpu: failed to create cgs device.\n"); |
| goto error; |
| } |
| |
| init_data.cgs_device = adev->dm.cgs_device; |
| |
| init_data.dce_environment = DCE_ENV_PRODUCTION_DRV; |
| |
| /* |
| * TODO debug why this doesn't work on Raven |
| */ |
| if (adev->flags & AMD_IS_APU && |
| adev->asic_type >= CHIP_CARRIZO && |
| adev->asic_type < CHIP_RAVEN) |
| init_data.flags.gpu_vm_support = true; |
| |
| if (amdgpu_dc_feature_mask & DC_FBC_MASK) |
| init_data.flags.fbc_support = true; |
| |
| /* Display Core create. */ |
| adev->dm.dc = dc_create(&init_data); |
| |
| if (adev->dm.dc) { |
| DRM_INFO("Display Core initialized with v%s!\n", DC_VER); |
| } else { |
| DRM_INFO("Display Core failed to initialize with v%s!\n", DC_VER); |
| goto error; |
| } |
| |
| adev->dm.freesync_module = mod_freesync_create(adev->dm.dc); |
| if (!adev->dm.freesync_module) { |
| DRM_ERROR( |
| "amdgpu: failed to initialize freesync_module.\n"); |
| } else |
| DRM_DEBUG_DRIVER("amdgpu: freesync_module init done %p.\n", |
| adev->dm.freesync_module); |
| |
| amdgpu_dm_init_color_mod(); |
| |
| if (amdgpu_dm_initialize_drm_device(adev)) { |
| DRM_ERROR( |
| "amdgpu: failed to initialize sw for display support.\n"); |
| goto error; |
| } |
| |
| /* Update the actual used number of crtc */ |
| adev->mode_info.num_crtc = adev->dm.display_indexes_num; |
| |
| /* TODO: Add_display_info? */ |
| |
| /* TODO use dynamic cursor width */ |
| adev->ddev->mode_config.cursor_width = adev->dm.dc->caps.max_cursor_size; |
| adev->ddev->mode_config.cursor_height = adev->dm.dc->caps.max_cursor_size; |
| |
| if (drm_vblank_init(adev->ddev, adev->dm.display_indexes_num)) { |
| DRM_ERROR( |
| "amdgpu: failed to initialize sw for display support.\n"); |
| goto error; |
| } |
| |
| #if defined(CONFIG_DEBUG_FS) |
| if (dtn_debugfs_init(adev)) |
| DRM_ERROR("amdgpu: failed initialize dtn debugfs support.\n"); |
| #endif |
| |
| DRM_DEBUG_DRIVER("KMS initialized.\n"); |
| |
| return 0; |
| error: |
| amdgpu_dm_fini(adev); |
| |
| return -EINVAL; |
| } |
| |
| static void amdgpu_dm_fini(struct amdgpu_device *adev) |
| { |
| amdgpu_dm_destroy_drm_device(&adev->dm); |
| /* |
| * TODO: pageflip, vlank interrupt |
| * |
| * amdgpu_dm_irq_fini(adev); |
| */ |
| |
| if (adev->dm.cgs_device) { |
| amdgpu_cgs_destroy_device(adev->dm.cgs_device); |
| adev->dm.cgs_device = NULL; |
| } |
| if (adev->dm.freesync_module) { |
| mod_freesync_destroy(adev->dm.freesync_module); |
| adev->dm.freesync_module = NULL; |
| } |
| /* DC Destroy TODO: Replace destroy DAL */ |
| if (adev->dm.dc) |
| dc_destroy(&adev->dm.dc); |
| |
| mutex_destroy(&adev->dm.dc_lock); |
| |
| return; |
| } |
| |
| static int load_dmcu_fw(struct amdgpu_device *adev) |
| { |
| const char *fw_name_dmcu; |
| int r; |
| const struct dmcu_firmware_header_v1_0 *hdr; |
| |
| switch(adev->asic_type) { |
| case CHIP_BONAIRE: |
| case CHIP_HAWAII: |
| case CHIP_KAVERI: |
| case CHIP_KABINI: |
| case CHIP_MULLINS: |
| case CHIP_TONGA: |
| case CHIP_FIJI: |
| case CHIP_CARRIZO: |
| case CHIP_STONEY: |
| case CHIP_POLARIS11: |
| case CHIP_POLARIS10: |
| case CHIP_POLARIS12: |
| case CHIP_VEGAM: |
| case CHIP_VEGA10: |
| case CHIP_VEGA12: |
| case CHIP_VEGA20: |
| return 0; |
| case CHIP_RAVEN: |
| fw_name_dmcu = FIRMWARE_RAVEN_DMCU; |
| break; |
| default: |
| DRM_ERROR("Unsupported ASIC type: 0x%X\n", adev->asic_type); |
| return -EINVAL; |
| } |
| |
| if (adev->firmware.load_type != AMDGPU_FW_LOAD_PSP) { |
| DRM_DEBUG_KMS("dm: DMCU firmware not supported on direct or SMU loading\n"); |
| return 0; |
| } |
| |
| r = request_firmware_direct(&adev->dm.fw_dmcu, fw_name_dmcu, adev->dev); |
| if (r == -ENOENT) { |
| /* DMCU firmware is not necessary, so don't raise a fuss if it's missing */ |
| DRM_DEBUG_KMS("dm: DMCU firmware not found\n"); |
| adev->dm.fw_dmcu = NULL; |
| return 0; |
| } |
| if (r) { |
| dev_err(adev->dev, "amdgpu_dm: Can't load firmware \"%s\"\n", |
| fw_name_dmcu); |
| return r; |
| } |
| |
| r = amdgpu_ucode_validate(adev->dm.fw_dmcu); |
| if (r) { |
| dev_err(adev->dev, "amdgpu_dm: Can't validate firmware \"%s\"\n", |
| fw_name_dmcu); |
| release_firmware(adev->dm.fw_dmcu); |
| adev->dm.fw_dmcu = NULL; |
| return r; |
| } |
| |
| hdr = (const struct dmcu_firmware_header_v1_0 *)adev->dm.fw_dmcu->data; |
| adev->firmware.ucode[AMDGPU_UCODE_ID_DMCU_ERAM].ucode_id = AMDGPU_UCODE_ID_DMCU_ERAM; |
| adev->firmware.ucode[AMDGPU_UCODE_ID_DMCU_ERAM].fw = adev->dm.fw_dmcu; |
| adev->firmware.fw_size += |
| ALIGN(le32_to_cpu(hdr->header.ucode_size_bytes) - le32_to_cpu(hdr->intv_size_bytes), PAGE_SIZE); |
| |
| adev->firmware.ucode[AMDGPU_UCODE_ID_DMCU_INTV].ucode_id = AMDGPU_UCODE_ID_DMCU_INTV; |
| adev->firmware.ucode[AMDGPU_UCODE_ID_DMCU_INTV].fw = adev->dm.fw_dmcu; |
| adev->firmware.fw_size += |
| ALIGN(le32_to_cpu(hdr->intv_size_bytes), PAGE_SIZE); |
| |
| adev->dm.dmcu_fw_version = le32_to_cpu(hdr->header.ucode_version); |
| |
| DRM_DEBUG_KMS("PSP loading DMCU firmware\n"); |
| |
| return 0; |
| } |
| |
| static int dm_sw_init(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| |
| return load_dmcu_fw(adev); |
| } |
| |
| static int dm_sw_fini(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| |
| if(adev->dm.fw_dmcu) { |
| release_firmware(adev->dm.fw_dmcu); |
| adev->dm.fw_dmcu = NULL; |
| } |
| |
| return 0; |
| } |
| |
| static int detect_mst_link_for_all_connectors(struct drm_device *dev) |
| { |
| struct amdgpu_dm_connector *aconnector; |
| struct drm_connector *connector; |
| int ret = 0; |
| |
| drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); |
| |
| list_for_each_entry(connector, &dev->mode_config.connector_list, head) { |
| aconnector = to_amdgpu_dm_connector(connector); |
| if (aconnector->dc_link->type == dc_connection_mst_branch && |
| aconnector->mst_mgr.aux) { |
| DRM_DEBUG_DRIVER("DM_MST: starting TM on aconnector: %p [id: %d]\n", |
| aconnector, aconnector->base.base.id); |
| |
| ret = drm_dp_mst_topology_mgr_set_mst(&aconnector->mst_mgr, true); |
| if (ret < 0) { |
| DRM_ERROR("DM_MST: Failed to start MST\n"); |
| ((struct dc_link *)aconnector->dc_link)->type = dc_connection_single; |
| return ret; |
| } |
| } |
| } |
| |
| drm_modeset_unlock(&dev->mode_config.connection_mutex); |
| return ret; |
| } |
| |
| static int dm_late_init(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| |
| struct dmcu_iram_parameters params; |
| unsigned int linear_lut[16]; |
| int i; |
| struct dmcu *dmcu = adev->dm.dc->res_pool->dmcu; |
| bool ret; |
| |
| for (i = 0; i < 16; i++) |
| linear_lut[i] = 0xFFFF * i / 15; |
| |
| params.set = 0; |
| params.backlight_ramping_start = 0xCCCC; |
| params.backlight_ramping_reduction = 0xCCCCCCCC; |
| params.backlight_lut_array_size = 16; |
| params.backlight_lut_array = linear_lut; |
| |
| ret = dmcu_load_iram(dmcu, params); |
| |
| if (!ret) |
| return -EINVAL; |
| |
| return detect_mst_link_for_all_connectors(adev->ddev); |
| } |
| |
| static void s3_handle_mst(struct drm_device *dev, bool suspend) |
| { |
| struct amdgpu_dm_connector *aconnector; |
| struct drm_connector *connector; |
| |
| drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); |
| |
| list_for_each_entry(connector, &dev->mode_config.connector_list, head) { |
| aconnector = to_amdgpu_dm_connector(connector); |
| if (aconnector->dc_link->type == dc_connection_mst_branch && |
| !aconnector->mst_port) { |
| |
| if (suspend) |
| drm_dp_mst_topology_mgr_suspend(&aconnector->mst_mgr); |
| else |
| drm_dp_mst_topology_mgr_resume(&aconnector->mst_mgr); |
| } |
| } |
| |
| drm_modeset_unlock(&dev->mode_config.connection_mutex); |
| } |
| |
| /** |
| * dm_hw_init() - Initialize DC device |
| * @handle: The base driver device containing the amdpgu_dm device. |
| * |
| * Initialize the &struct amdgpu_display_manager device. This involves calling |
| * the initializers of each DM component, then populating the struct with them. |
| * |
| * Although the function implies hardware initialization, both hardware and |
| * software are initialized here. Splitting them out to their relevant init |
| * hooks is a future TODO item. |
| * |
| * Some notable things that are initialized here: |
| * |
| * - Display Core, both software and hardware |
| * - DC modules that we need (freesync and color management) |
| * - DRM software states |
| * - Interrupt sources and handlers |
| * - Vblank support |
| * - Debug FS entries, if enabled |
| */ |
| static int dm_hw_init(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| /* Create DAL display manager */ |
| amdgpu_dm_init(adev); |
| amdgpu_dm_hpd_init(adev); |
| |
| return 0; |
| } |
| |
| /** |
| * dm_hw_fini() - Teardown DC device |
| * @handle: The base driver device containing the amdpgu_dm device. |
| * |
| * Teardown components within &struct amdgpu_display_manager that require |
| * cleanup. This involves cleaning up the DRM device, DC, and any modules that |
| * were loaded. Also flush IRQ workqueues and disable them. |
| */ |
| static int dm_hw_fini(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| |
| amdgpu_dm_hpd_fini(adev); |
| |
| amdgpu_dm_irq_fini(adev); |
| amdgpu_dm_fini(adev); |
| return 0; |
| } |
| |
| static int dm_suspend(void *handle) |
| { |
| struct amdgpu_device *adev = handle; |
| struct amdgpu_display_manager *dm = &adev->dm; |
| int ret = 0; |
| |
| s3_handle_mst(adev->ddev, true); |
| |
| amdgpu_dm_irq_suspend(adev); |
| |
| WARN_ON(adev->dm.cached_state); |
| adev->dm.cached_state = drm_atomic_helper_suspend(adev->ddev); |
| |
| dc_set_power_state(dm->dc, DC_ACPI_CM_POWER_STATE_D3); |
| |
| return ret; |
| } |
| |
| static struct amdgpu_dm_connector * |
| amdgpu_dm_find_first_crtc_matching_connector(struct drm_atomic_state *state, |
| struct drm_crtc *crtc) |
| { |
| uint32_t i; |
| struct drm_connector_state *new_con_state; |
| struct drm_connector *connector; |
| struct drm_crtc *crtc_from_state; |
| |
| for_each_new_connector_in_state(state, connector, new_con_state, i) { |
| crtc_from_state = new_con_state->crtc; |
| |
| if (crtc_from_state == crtc) |
| return to_amdgpu_dm_connector(connector); |
| } |
| |
| return NULL; |
| } |
| |
| static void emulated_link_detect(struct dc_link *link) |
| { |
| struct dc_sink_init_data sink_init_data = { 0 }; |
| struct display_sink_capability sink_caps = { 0 }; |
| enum dc_edid_status edid_status; |
| struct dc_context *dc_ctx = link->ctx; |
| struct dc_sink *sink = NULL; |
| struct dc_sink *prev_sink = NULL; |
| |
| link->type = dc_connection_none; |
| prev_sink = link->local_sink; |
| |
| if (prev_sink != NULL) |
| dc_sink_retain(prev_sink); |
| |
| switch (link->connector_signal) { |
| case SIGNAL_TYPE_HDMI_TYPE_A: { |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; |
| sink_caps.signal = SIGNAL_TYPE_HDMI_TYPE_A; |
| break; |
| } |
| |
| case SIGNAL_TYPE_DVI_SINGLE_LINK: { |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; |
| sink_caps.signal = SIGNAL_TYPE_DVI_SINGLE_LINK; |
| break; |
| } |
| |
| case SIGNAL_TYPE_DVI_DUAL_LINK: { |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; |
| sink_caps.signal = SIGNAL_TYPE_DVI_DUAL_LINK; |
| break; |
| } |
| |
| case SIGNAL_TYPE_LVDS: { |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; |
| sink_caps.signal = SIGNAL_TYPE_LVDS; |
| break; |
| } |
| |
| case SIGNAL_TYPE_EDP: { |
| sink_caps.transaction_type = |
| DDC_TRANSACTION_TYPE_I2C_OVER_AUX; |
| sink_caps.signal = SIGNAL_TYPE_EDP; |
| break; |
| } |
| |
| case SIGNAL_TYPE_DISPLAY_PORT: { |
| sink_caps.transaction_type = |
| DDC_TRANSACTION_TYPE_I2C_OVER_AUX; |
| sink_caps.signal = SIGNAL_TYPE_VIRTUAL; |
| break; |
| } |
| |
| default: |
| DC_ERROR("Invalid connector type! signal:%d\n", |
| link->connector_signal); |
| return; |
| } |
| |
| sink_init_data.link = link; |
| sink_init_data.sink_signal = sink_caps.signal; |
| |
| sink = dc_sink_create(&sink_init_data); |
| if (!sink) { |
| DC_ERROR("Failed to create sink!\n"); |
| return; |
| } |
| |
| link->local_sink = sink; |
| |
| edid_status = dm_helpers_read_local_edid( |
| link->ctx, |
| link, |
| sink); |
| |
| if (edid_status != EDID_OK) |
| DC_ERROR("Failed to read EDID"); |
| |
| } |
| |
| static int dm_resume(void *handle) |
| { |
| struct amdgpu_device *adev = handle; |
| struct drm_device *ddev = adev->ddev; |
| struct amdgpu_display_manager *dm = &adev->dm; |
| struct amdgpu_dm_connector *aconnector; |
| struct drm_connector *connector; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *new_crtc_state; |
| struct dm_crtc_state *dm_new_crtc_state; |
| struct drm_plane *plane; |
| struct drm_plane_state *new_plane_state; |
| struct dm_plane_state *dm_new_plane_state; |
| enum dc_connection_type new_connection_type = dc_connection_none; |
| int ret; |
| int i; |
| |
| /* power on hardware */ |
| dc_set_power_state(dm->dc, DC_ACPI_CM_POWER_STATE_D0); |
| |
| /* program HPD filter */ |
| dc_resume(dm->dc); |
| |
| /* On resume we need to rewrite the MSTM control bits to enamble MST*/ |
| s3_handle_mst(ddev, false); |
| |
| /* |
| * early enable HPD Rx IRQ, should be done before set mode as short |
| * pulse interrupts are used for MST |
| */ |
| amdgpu_dm_irq_resume_early(adev); |
| |
| /* Do detection*/ |
| list_for_each_entry(connector, &ddev->mode_config.connector_list, head) { |
| aconnector = to_amdgpu_dm_connector(connector); |
| |
| /* |
| * this is the case when traversing through already created |
| * MST connectors, should be skipped |
| */ |
| if (aconnector->mst_port) |
| continue; |
| |
| mutex_lock(&aconnector->hpd_lock); |
| if (!dc_link_detect_sink(aconnector->dc_link, &new_connection_type)) |
| DRM_ERROR("KMS: Failed to detect connector\n"); |
| |
| if (aconnector->base.force && new_connection_type == dc_connection_none) |
| emulated_link_detect(aconnector->dc_link); |
| else |
| dc_link_detect(aconnector->dc_link, DETECT_REASON_HPD); |
| |
| if (aconnector->fake_enable && aconnector->dc_link->local_sink) |
| aconnector->fake_enable = false; |
| |
| aconnector->dc_sink = NULL; |
| amdgpu_dm_update_connector_after_detect(aconnector); |
| mutex_unlock(&aconnector->hpd_lock); |
| } |
| |
| /* Force mode set in atomic commit */ |
| for_each_new_crtc_in_state(dm->cached_state, crtc, new_crtc_state, i) |
| new_crtc_state->active_changed = true; |
| |
| /* |
| * atomic_check is expected to create the dc states. We need to release |
| * them here, since they were duplicated as part of the suspend |
| * procedure. |
| */ |
| for_each_new_crtc_in_state(dm->cached_state, crtc, new_crtc_state, i) { |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| if (dm_new_crtc_state->stream) { |
| WARN_ON(kref_read(&dm_new_crtc_state->stream->refcount) > 1); |
| dc_stream_release(dm_new_crtc_state->stream); |
| dm_new_crtc_state->stream = NULL; |
| } |
| } |
| |
| for_each_new_plane_in_state(dm->cached_state, plane, new_plane_state, i) { |
| dm_new_plane_state = to_dm_plane_state(new_plane_state); |
| if (dm_new_plane_state->dc_state) { |
| WARN_ON(kref_read(&dm_new_plane_state->dc_state->refcount) > 1); |
| dc_plane_state_release(dm_new_plane_state->dc_state); |
| dm_new_plane_state->dc_state = NULL; |
| } |
| } |
| |
| ret = drm_atomic_helper_resume(ddev, dm->cached_state); |
| |
| dm->cached_state = NULL; |
| |
| amdgpu_dm_irq_resume_late(adev); |
| |
| return ret; |
| } |
| |
| /** |
| * DOC: DM Lifecycle |
| * |
| * DM (and consequently DC) is registered in the amdgpu base driver as a IP |
| * block. When CONFIG_DRM_AMD_DC is enabled, the DM device IP block is added to |
| * the base driver's device list to be initialized and torn down accordingly. |
| * |
| * The functions to do so are provided as hooks in &struct amd_ip_funcs. |
| */ |
| |
| static const struct amd_ip_funcs amdgpu_dm_funcs = { |
| .name = "dm", |
| .early_init = dm_early_init, |
| .late_init = dm_late_init, |
| .sw_init = dm_sw_init, |
| .sw_fini = dm_sw_fini, |
| .hw_init = dm_hw_init, |
| .hw_fini = dm_hw_fini, |
| .suspend = dm_suspend, |
| .resume = dm_resume, |
| .is_idle = dm_is_idle, |
| .wait_for_idle = dm_wait_for_idle, |
| .check_soft_reset = dm_check_soft_reset, |
| .soft_reset = dm_soft_reset, |
| .set_clockgating_state = dm_set_clockgating_state, |
| .set_powergating_state = dm_set_powergating_state, |
| }; |
| |
| const struct amdgpu_ip_block_version dm_ip_block = |
| { |
| .type = AMD_IP_BLOCK_TYPE_DCE, |
| .major = 1, |
| .minor = 0, |
| .rev = 0, |
| .funcs = &amdgpu_dm_funcs, |
| }; |
| |
| |
| /** |
| * DOC: atomic |
| * |
| * *WIP* |
| */ |
| |
| static const struct drm_mode_config_funcs amdgpu_dm_mode_funcs = { |
| .fb_create = amdgpu_display_user_framebuffer_create, |
| .output_poll_changed = drm_fb_helper_output_poll_changed, |
| .atomic_check = amdgpu_dm_atomic_check, |
| .atomic_commit = amdgpu_dm_atomic_commit, |
| }; |
| |
| static struct drm_mode_config_helper_funcs amdgpu_dm_mode_config_helperfuncs = { |
| .atomic_commit_tail = amdgpu_dm_atomic_commit_tail |
| }; |
| |
| static void |
| amdgpu_dm_update_connector_after_detect(struct amdgpu_dm_connector *aconnector) |
| { |
| struct drm_connector *connector = &aconnector->base; |
| struct drm_device *dev = connector->dev; |
| struct dc_sink *sink; |
| |
| /* MST handled by drm_mst framework */ |
| if (aconnector->mst_mgr.mst_state == true) |
| return; |
| |
| |
| sink = aconnector->dc_link->local_sink; |
| |
| /* |
| * Edid mgmt connector gets first update only in mode_valid hook and then |
| * the connector sink is set to either fake or physical sink depends on link status. |
| * Skip if already done during boot. |
| */ |
| if (aconnector->base.force != DRM_FORCE_UNSPECIFIED |
| && aconnector->dc_em_sink) { |
| |
| /* |
| * For S3 resume with headless use eml_sink to fake stream |
| * because on resume connector->sink is set to NULL |
| */ |
| mutex_lock(&dev->mode_config.mutex); |
| |
| if (sink) { |
| if (aconnector->dc_sink) { |
| amdgpu_dm_update_freesync_caps(connector, NULL); |
| /* |
| * retain and release below are used to |
| * bump up refcount for sink because the link doesn't point |
| * to it anymore after disconnect, so on next crtc to connector |
| * reshuffle by UMD we will get into unwanted dc_sink release |
| */ |
| if (aconnector->dc_sink != aconnector->dc_em_sink) |
| dc_sink_release(aconnector->dc_sink); |
| } |
| aconnector->dc_sink = sink; |
| amdgpu_dm_update_freesync_caps(connector, |
| aconnector->edid); |
| } else { |
| amdgpu_dm_update_freesync_caps(connector, NULL); |
| if (!aconnector->dc_sink) |
| aconnector->dc_sink = aconnector->dc_em_sink; |
| else if (aconnector->dc_sink != aconnector->dc_em_sink) |
| dc_sink_retain(aconnector->dc_sink); |
| } |
| |
| mutex_unlock(&dev->mode_config.mutex); |
| return; |
| } |
| |
| /* |
| * TODO: temporary guard to look for proper fix |
| * if this sink is MST sink, we should not do anything |
| */ |
| if (sink && sink->sink_signal == SIGNAL_TYPE_DISPLAY_PORT_MST) |
| return; |
| |
| if (aconnector->dc_sink == sink) { |
| /* |
| * We got a DP short pulse (Link Loss, DP CTS, etc...). |
| * Do nothing!! |
| */ |
| DRM_DEBUG_DRIVER("DCHPD: connector_id=%d: dc_sink didn't change.\n", |
| aconnector->connector_id); |
| return; |
| } |
| |
| DRM_DEBUG_DRIVER("DCHPD: connector_id=%d: Old sink=%p New sink=%p\n", |
| aconnector->connector_id, aconnector->dc_sink, sink); |
| |
| mutex_lock(&dev->mode_config.mutex); |
| |
| /* |
| * 1. Update status of the drm connector |
| * 2. Send an event and let userspace tell us what to do |
| */ |
| if (sink) { |
| /* |
| * TODO: check if we still need the S3 mode update workaround. |
| * If yes, put it here. |
| */ |
| if (aconnector->dc_sink) |
| amdgpu_dm_update_freesync_caps(connector, NULL); |
| |
| aconnector->dc_sink = sink; |
| if (sink->dc_edid.length == 0) { |
| aconnector->edid = NULL; |
| drm_dp_cec_unset_edid(&aconnector->dm_dp_aux.aux); |
| } else { |
| aconnector->edid = |
| (struct edid *) sink->dc_edid.raw_edid; |
| |
| |
| drm_connector_update_edid_property(connector, |
| aconnector->edid); |
| drm_dp_cec_set_edid(&aconnector->dm_dp_aux.aux, |
| aconnector->edid); |
| } |
| amdgpu_dm_update_freesync_caps(connector, aconnector->edid); |
| |
| } else { |
| drm_dp_cec_unset_edid(&aconnector->dm_dp_aux.aux); |
| amdgpu_dm_update_freesync_caps(connector, NULL); |
| drm_connector_update_edid_property(connector, NULL); |
| aconnector->num_modes = 0; |
| aconnector->dc_sink = NULL; |
| aconnector->edid = NULL; |
| } |
| |
| mutex_unlock(&dev->mode_config.mutex); |
| } |
| |
| static void handle_hpd_irq(void *param) |
| { |
| struct amdgpu_dm_connector *aconnector = (struct amdgpu_dm_connector *)param; |
| struct drm_connector *connector = &aconnector->base; |
| struct drm_device *dev = connector->dev; |
| enum dc_connection_type new_connection_type = dc_connection_none; |
| |
| /* |
| * In case of failure or MST no need to update connector status or notify the OS |
| * since (for MST case) MST does this in its own context. |
| */ |
| mutex_lock(&aconnector->hpd_lock); |
| |
| if (aconnector->fake_enable) |
| aconnector->fake_enable = false; |
| |
| if (!dc_link_detect_sink(aconnector->dc_link, &new_connection_type)) |
| DRM_ERROR("KMS: Failed to detect connector\n"); |
| |
| if (aconnector->base.force && new_connection_type == dc_connection_none) { |
| emulated_link_detect(aconnector->dc_link); |
| |
| |
| drm_modeset_lock_all(dev); |
| dm_restore_drm_connector_state(dev, connector); |
| drm_modeset_unlock_all(dev); |
| |
| if (aconnector->base.force == DRM_FORCE_UNSPECIFIED) |
| drm_kms_helper_hotplug_event(dev); |
| |
| } else if (dc_link_detect(aconnector->dc_link, DETECT_REASON_HPD)) { |
| amdgpu_dm_update_connector_after_detect(aconnector); |
| |
| |
| drm_modeset_lock_all(dev); |
| dm_restore_drm_connector_state(dev, connector); |
| drm_modeset_unlock_all(dev); |
| |
| if (aconnector->base.force == DRM_FORCE_UNSPECIFIED) |
| drm_kms_helper_hotplug_event(dev); |
| } |
| mutex_unlock(&aconnector->hpd_lock); |
| |
| } |
| |
| static void dm_handle_hpd_rx_irq(struct amdgpu_dm_connector *aconnector) |
| { |
| uint8_t esi[DP_PSR_ERROR_STATUS - DP_SINK_COUNT_ESI] = { 0 }; |
| uint8_t dret; |
| bool new_irq_handled = false; |
| int dpcd_addr; |
| int dpcd_bytes_to_read; |
| |
| const int max_process_count = 30; |
| int process_count = 0; |
| |
| const struct dc_link_status *link_status = dc_link_get_status(aconnector->dc_link); |
| |
| if (link_status->dpcd_caps->dpcd_rev.raw < 0x12) { |
| dpcd_bytes_to_read = DP_LANE0_1_STATUS - DP_SINK_COUNT; |
| /* DPCD 0x200 - 0x201 for downstream IRQ */ |
| dpcd_addr = DP_SINK_COUNT; |
| } else { |
| dpcd_bytes_to_read = DP_PSR_ERROR_STATUS - DP_SINK_COUNT_ESI; |
| /* DPCD 0x2002 - 0x2005 for downstream IRQ */ |
| dpcd_addr = DP_SINK_COUNT_ESI; |
| } |
| |
| dret = drm_dp_dpcd_read( |
| &aconnector->dm_dp_aux.aux, |
| dpcd_addr, |
| esi, |
| dpcd_bytes_to_read); |
| |
| while (dret == dpcd_bytes_to_read && |
| process_count < max_process_count) { |
| uint8_t retry; |
| dret = 0; |
| |
| process_count++; |
| |
| DRM_DEBUG_DRIVER("ESI %02x %02x %02x\n", esi[0], esi[1], esi[2]); |
| /* handle HPD short pulse irq */ |
| if (aconnector->mst_mgr.mst_state) |
| drm_dp_mst_hpd_irq( |
| &aconnector->mst_mgr, |
| esi, |
| &new_irq_handled); |
| |
| if (new_irq_handled) { |
| /* ACK at DPCD to notify down stream */ |
| const int ack_dpcd_bytes_to_write = |
| dpcd_bytes_to_read - 1; |
| |
| for (retry = 0; retry < 3; retry++) { |
| uint8_t wret; |
| |
| wret = drm_dp_dpcd_write( |
| &aconnector->dm_dp_aux.aux, |
| dpcd_addr + 1, |
| &esi[1], |
| ack_dpcd_bytes_to_write); |
| if (wret == ack_dpcd_bytes_to_write) |
| break; |
| } |
| |
| /* check if there is new irq to be handled */ |
| dret = drm_dp_dpcd_read( |
| &aconnector->dm_dp_aux.aux, |
| dpcd_addr, |
| esi, |
| dpcd_bytes_to_read); |
| |
| new_irq_handled = false; |
| } else { |
| break; |
| } |
| } |
| |
| if (process_count == max_process_count) |
| DRM_DEBUG_DRIVER("Loop exceeded max iterations\n"); |
| } |
| |
| static void handle_hpd_rx_irq(void *param) |
| { |
| struct amdgpu_dm_connector *aconnector = (struct amdgpu_dm_connector *)param; |
| struct drm_connector *connector = &aconnector->base; |
| struct drm_device *dev = connector->dev; |
| struct dc_link *dc_link = aconnector->dc_link; |
| bool is_mst_root_connector = aconnector->mst_mgr.mst_state; |
| enum dc_connection_type new_connection_type = dc_connection_none; |
| |
| /* |
| * TODO:Temporary add mutex to protect hpd interrupt not have a gpio |
| * conflict, after implement i2c helper, this mutex should be |
| * retired. |
| */ |
| if (dc_link->type != dc_connection_mst_branch) |
| mutex_lock(&aconnector->hpd_lock); |
| |
| if (dc_link_handle_hpd_rx_irq(dc_link, NULL, NULL) && |
| !is_mst_root_connector) { |
| /* Downstream Port status changed. */ |
| if (!dc_link_detect_sink(dc_link, &new_connection_type)) |
| DRM_ERROR("KMS: Failed to detect connector\n"); |
| |
| if (aconnector->base.force && new_connection_type == dc_connection_none) { |
| emulated_link_detect(dc_link); |
| |
| if (aconnector->fake_enable) |
| aconnector->fake_enable = false; |
| |
| amdgpu_dm_update_connector_after_detect(aconnector); |
| |
| |
| drm_modeset_lock_all(dev); |
| dm_restore_drm_connector_state(dev, connector); |
| drm_modeset_unlock_all(dev); |
| |
| drm_kms_helper_hotplug_event(dev); |
| } else if (dc_link_detect(dc_link, DETECT_REASON_HPDRX)) { |
| |
| if (aconnector->fake_enable) |
| aconnector->fake_enable = false; |
| |
| amdgpu_dm_update_connector_after_detect(aconnector); |
| |
| |
| drm_modeset_lock_all(dev); |
| dm_restore_drm_connector_state(dev, connector); |
| drm_modeset_unlock_all(dev); |
| |
| drm_kms_helper_hotplug_event(dev); |
| } |
| } |
| if ((dc_link->cur_link_settings.lane_count != LANE_COUNT_UNKNOWN) || |
| (dc_link->type == dc_connection_mst_branch)) |
| dm_handle_hpd_rx_irq(aconnector); |
| |
| if (dc_link->type != dc_connection_mst_branch) { |
| drm_dp_cec_irq(&aconnector->dm_dp_aux.aux); |
| mutex_unlock(&aconnector->hpd_lock); |
| } |
| } |
| |
| static void register_hpd_handlers(struct amdgpu_device *adev) |
| { |
| struct drm_device *dev = adev->ddev; |
| struct drm_connector *connector; |
| struct amdgpu_dm_connector *aconnector; |
| const struct dc_link *dc_link; |
| struct dc_interrupt_params int_params = {0}; |
| |
| int_params.requested_polarity = INTERRUPT_POLARITY_DEFAULT; |
| int_params.current_polarity = INTERRUPT_POLARITY_DEFAULT; |
| |
| list_for_each_entry(connector, |
| &dev->mode_config.connector_list, head) { |
| |
| aconnector = to_amdgpu_dm_connector(connector); |
| dc_link = aconnector->dc_link; |
| |
| if (DC_IRQ_SOURCE_INVALID != dc_link->irq_source_hpd) { |
| int_params.int_context = INTERRUPT_LOW_IRQ_CONTEXT; |
| int_params.irq_source = dc_link->irq_source_hpd; |
| |
| amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| handle_hpd_irq, |
| (void *) aconnector); |
| } |
| |
| if (DC_IRQ_SOURCE_INVALID != dc_link->irq_source_hpd_rx) { |
| |
| /* Also register for DP short pulse (hpd_rx). */ |
| int_params.int_context = INTERRUPT_LOW_IRQ_CONTEXT; |
| int_params.irq_source = dc_link->irq_source_hpd_rx; |
| |
| amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| handle_hpd_rx_irq, |
| (void *) aconnector); |
| } |
| } |
| } |
| |
| /* Register IRQ sources and initialize IRQ callbacks */ |
| static int dce110_register_irq_handlers(struct amdgpu_device *adev) |
| { |
| struct dc *dc = adev->dm.dc; |
| struct common_irq_params *c_irq_params; |
| struct dc_interrupt_params int_params = {0}; |
| int r; |
| int i; |
| unsigned client_id = AMDGPU_IRQ_CLIENTID_LEGACY; |
| |
| if (adev->asic_type == CHIP_VEGA10 || |
| adev->asic_type == CHIP_VEGA12 || |
| adev->asic_type == CHIP_VEGA20 || |
| adev->asic_type == CHIP_RAVEN) |
| client_id = SOC15_IH_CLIENTID_DCE; |
| |
| int_params.requested_polarity = INTERRUPT_POLARITY_DEFAULT; |
| int_params.current_polarity = INTERRUPT_POLARITY_DEFAULT; |
| |
| /* |
| * Actions of amdgpu_irq_add_id(): |
| * 1. Register a set() function with base driver. |
| * Base driver will call set() function to enable/disable an |
| * interrupt in DC hardware. |
| * 2. Register amdgpu_dm_irq_handler(). |
| * Base driver will call amdgpu_dm_irq_handler() for ALL interrupts |
| * coming from DC hardware. |
| * amdgpu_dm_irq_handler() will re-direct the interrupt to DC |
| * for acknowledging and handling. */ |
| |
| /* Use VBLANK interrupt */ |
| for (i = VISLANDS30_IV_SRCID_D1_VERTICAL_INTERRUPT0; i <= VISLANDS30_IV_SRCID_D6_VERTICAL_INTERRUPT0; i++) { |
| r = amdgpu_irq_add_id(adev, client_id, i, &adev->crtc_irq); |
| if (r) { |
| DRM_ERROR("Failed to add crtc irq id!\n"); |
| return r; |
| } |
| |
| int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, i, 0); |
| |
| c_irq_params = &adev->dm.vblank_params[int_params.irq_source - DC_IRQ_SOURCE_VBLANK1]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_crtc_high_irq, c_irq_params); |
| } |
| |
| /* Use GRPH_PFLIP interrupt */ |
| for (i = VISLANDS30_IV_SRCID_D1_GRPH_PFLIP; |
| i <= VISLANDS30_IV_SRCID_D6_GRPH_PFLIP; i += 2) { |
| r = amdgpu_irq_add_id(adev, client_id, i, &adev->pageflip_irq); |
| if (r) { |
| DRM_ERROR("Failed to add page flip irq id!\n"); |
| return r; |
| } |
| |
| int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, i, 0); |
| |
| c_irq_params = &adev->dm.pflip_params[int_params.irq_source - DC_IRQ_SOURCE_PFLIP_FIRST]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_pflip_high_irq, c_irq_params); |
| |
| } |
| |
| /* HPD */ |
| r = amdgpu_irq_add_id(adev, client_id, |
| VISLANDS30_IV_SRCID_HOTPLUG_DETECT_A, &adev->hpd_irq); |
| if (r) { |
| DRM_ERROR("Failed to add hpd irq id!\n"); |
| return r; |
| } |
| |
| register_hpd_handlers(adev); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_DRM_AMD_DC_DCN1_0) |
| /* Register IRQ sources and initialize IRQ callbacks */ |
| static int dcn10_register_irq_handlers(struct amdgpu_device *adev) |
| { |
| struct dc *dc = adev->dm.dc; |
| struct common_irq_params *c_irq_params; |
| struct dc_interrupt_params int_params = {0}; |
| int r; |
| int i; |
| |
| int_params.requested_polarity = INTERRUPT_POLARITY_DEFAULT; |
| int_params.current_polarity = INTERRUPT_POLARITY_DEFAULT; |
| |
| /* |
| * Actions of amdgpu_irq_add_id(): |
| * 1. Register a set() function with base driver. |
| * Base driver will call set() function to enable/disable an |
| * interrupt in DC hardware. |
| * 2. Register amdgpu_dm_irq_handler(). |
| * Base driver will call amdgpu_dm_irq_handler() for ALL interrupts |
| * coming from DC hardware. |
| * amdgpu_dm_irq_handler() will re-direct the interrupt to DC |
| * for acknowledging and handling. |
| */ |
| |
| /* Use VSTARTUP interrupt */ |
| for (i = DCN_1_0__SRCID__DC_D1_OTG_VSTARTUP; |
| i <= DCN_1_0__SRCID__DC_D1_OTG_VSTARTUP + adev->mode_info.num_crtc - 1; |
| i++) { |
| r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_DCE, i, &adev->crtc_irq); |
| |
| if (r) { |
| DRM_ERROR("Failed to add crtc irq id!\n"); |
| return r; |
| } |
| |
| int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, i, 0); |
| |
| c_irq_params = &adev->dm.vblank_params[int_params.irq_source - DC_IRQ_SOURCE_VBLANK1]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_crtc_high_irq, c_irq_params); |
| } |
| |
| /* Use GRPH_PFLIP interrupt */ |
| for (i = DCN_1_0__SRCID__HUBP0_FLIP_INTERRUPT; |
| i <= DCN_1_0__SRCID__HUBP0_FLIP_INTERRUPT + adev->mode_info.num_crtc - 1; |
| i++) { |
| r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_DCE, i, &adev->pageflip_irq); |
| if (r) { |
| DRM_ERROR("Failed to add page flip irq id!\n"); |
| return r; |
| } |
| |
| int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; |
| int_params.irq_source = |
| dc_interrupt_to_irq_source(dc, i, 0); |
| |
| c_irq_params = &adev->dm.pflip_params[int_params.irq_source - DC_IRQ_SOURCE_PFLIP_FIRST]; |
| |
| c_irq_params->adev = adev; |
| c_irq_params->irq_src = int_params.irq_source; |
| |
| amdgpu_dm_irq_register_interrupt(adev, &int_params, |
| dm_pflip_high_irq, c_irq_params); |
| |
| } |
| |
| /* HPD */ |
| r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_DCE, DCN_1_0__SRCID__DC_HPD1_INT, |
| &adev->hpd_irq); |
| if (r) { |
| DRM_ERROR("Failed to add hpd irq id!\n"); |
| return r; |
| } |
| |
| register_hpd_handlers(adev); |
| |
| return 0; |
| } |
| #endif |
| |
| /* |
| * Acquires the lock for the atomic state object and returns |
| * the new atomic state. |
| * |
| * This should only be called during atomic check. |
| */ |
| static int dm_atomic_get_state(struct drm_atomic_state *state, |
| struct dm_atomic_state **dm_state) |
| { |
| struct drm_device *dev = state->dev; |
| struct amdgpu_device *adev = dev->dev_private; |
| struct amdgpu_display_manager *dm = &adev->dm; |
| struct drm_private_state *priv_state; |
| int ret; |
| |
| if (*dm_state) |
| return 0; |
| |
| ret = drm_modeset_lock(&dm->atomic_obj_lock, state->acquire_ctx); |
| if (ret) |
| return ret; |
| |
| priv_state = drm_atomic_get_private_obj_state(state, &dm->atomic_obj); |
| if (IS_ERR(priv_state)) |
| return PTR_ERR(priv_state); |
| |
| *dm_state = to_dm_atomic_state(priv_state); |
| |
| return 0; |
| } |
| |
| struct dm_atomic_state * |
| dm_atomic_get_new_state(struct drm_atomic_state *state) |
| { |
| struct drm_device *dev = state->dev; |
| struct amdgpu_device *adev = dev->dev_private; |
| struct amdgpu_display_manager *dm = &adev->dm; |
| struct drm_private_obj *obj; |
| struct drm_private_state *new_obj_state; |
| int i; |
| |
| for_each_new_private_obj_in_state(state, obj, new_obj_state, i) { |
| if (obj->funcs == dm->atomic_obj.funcs) |
| return to_dm_atomic_state(new_obj_state); |
| } |
| |
| return NULL; |
| } |
| |
| struct dm_atomic_state * |
| dm_atomic_get_old_state(struct drm_atomic_state *state) |
| { |
| struct drm_device *dev = state->dev; |
| struct amdgpu_device *adev = dev->dev_private; |
| struct amdgpu_display_manager *dm = &adev->dm; |
| struct drm_private_obj *obj; |
| struct drm_private_state *old_obj_state; |
| int i; |
| |
| for_each_old_private_obj_in_state(state, obj, old_obj_state, i) { |
| if (obj->funcs == dm->atomic_obj.funcs) |
| return to_dm_atomic_state(old_obj_state); |
| } |
| |
| return NULL; |
| } |
| |
| static struct drm_private_state * |
| dm_atomic_duplicate_state(struct drm_private_obj *obj) |
| { |
| struct dm_atomic_state *old_state, *new_state; |
| |
| new_state = kzalloc(sizeof(*new_state), GFP_KERNEL); |
| if (!new_state) |
| return NULL; |
| |
| __drm_atomic_helper_private_obj_duplicate_state(obj, &new_state->base); |
| |
| new_state->context = dc_create_state(); |
| if (!new_state->context) { |
| kfree(new_state); |
| return NULL; |
| } |
| |
| old_state = to_dm_atomic_state(obj->state); |
| if (old_state && old_state->context) |
| dc_resource_state_copy_construct(old_state->context, |
| new_state->context); |
| |
| return &new_state->base; |
| } |
| |
| static void dm_atomic_destroy_state(struct drm_private_obj *obj, |
| struct drm_private_state *state) |
| { |
| struct dm_atomic_state *dm_state = to_dm_atomic_state(state); |
| |
| if (dm_state && dm_state->context) |
| dc_release_state(dm_state->context); |
| |
| kfree(dm_state); |
| } |
| |
| static struct drm_private_state_funcs dm_atomic_state_funcs = { |
| .atomic_duplicate_state = dm_atomic_duplicate_state, |
| .atomic_destroy_state = dm_atomic_destroy_state, |
| }; |
| |
| static int amdgpu_dm_mode_config_init(struct amdgpu_device *adev) |
| { |
| struct dm_atomic_state *state; |
| int r; |
| |
| adev->mode_info.mode_config_initialized = true; |
| |
| adev->ddev->mode_config.funcs = (void *)&amdgpu_dm_mode_funcs; |
| adev->ddev->mode_config.helper_private = &amdgpu_dm_mode_config_helperfuncs; |
| |
| adev->ddev->mode_config.max_width = 16384; |
| adev->ddev->mode_config.max_height = 16384; |
| |
| adev->ddev->mode_config.preferred_depth = 24; |
| adev->ddev->mode_config.prefer_shadow = 1; |
| /* indicates support for immediate flip */ |
| adev->ddev->mode_config.async_page_flip = true; |
| |
| adev->ddev->mode_config.fb_base = adev->gmc.aper_base; |
| |
| drm_modeset_lock_init(&adev->dm.atomic_obj_lock); |
| |
| state = kzalloc(sizeof(*state), GFP_KERNEL); |
| if (!state) |
| return -ENOMEM; |
| |
| state->context = dc_create_state(); |
| if (!state->context) { |
| kfree(state); |
| return -ENOMEM; |
| } |
| |
| dc_resource_state_copy_construct_current(adev->dm.dc, state->context); |
| |
| drm_atomic_private_obj_init(&adev->dm.atomic_obj, |
| &state->base, |
| &dm_atomic_state_funcs); |
| |
| r = amdgpu_display_modeset_create_props(adev); |
| if (r) |
| return r; |
| |
| return 0; |
| } |
| |
| #define AMDGPU_DM_DEFAULT_MIN_BACKLIGHT 12 |
| #define AMDGPU_DM_DEFAULT_MAX_BACKLIGHT 255 |
| |
| #if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) ||\ |
| defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) |
| |
| static void amdgpu_dm_update_backlight_caps(struct amdgpu_display_manager *dm) |
| { |
| #if defined(CONFIG_ACPI) |
| struct amdgpu_dm_backlight_caps caps; |
| |
| if (dm->backlight_caps.caps_valid) |
| return; |
| |
| amdgpu_acpi_get_backlight_caps(dm->adev, &caps); |
| if (caps.caps_valid) { |
| dm->backlight_caps.min_input_signal = caps.min_input_signal; |
| dm->backlight_caps.max_input_signal = caps.max_input_signal; |
| dm->backlight_caps.caps_valid = true; |
| } else { |
| dm->backlight_caps.min_input_signal = |
| AMDGPU_DM_DEFAULT_MIN_BACKLIGHT; |
| dm->backlight_caps.max_input_signal = |
| AMDGPU_DM_DEFAULT_MAX_BACKLIGHT; |
| } |
| #else |
| dm->backlight_caps.min_input_signal = AMDGPU_DM_DEFAULT_MIN_BACKLIGHT; |
| dm->backlight_caps.max_input_signal = AMDGPU_DM_DEFAULT_MAX_BACKLIGHT; |
| #endif |
| } |
| |
| static int amdgpu_dm_backlight_update_status(struct backlight_device *bd) |
| { |
| struct amdgpu_display_manager *dm = bl_get_data(bd); |
| struct amdgpu_dm_backlight_caps caps; |
| uint32_t brightness = bd->props.brightness; |
| |
| amdgpu_dm_update_backlight_caps(dm); |
| caps = dm->backlight_caps; |
| /* |
| * The brightness input is in the range 0-255 |
| * It needs to be rescaled to be between the |
| * requested min and max input signal |
| * |
| * It also needs to be scaled up by 0x101 to |
| * match the DC interface which has a range of |
| * 0 to 0xffff |
| */ |
| brightness = |
| brightness |
| * 0x101 |
| * (caps.max_input_signal - caps.min_input_signal) |
| / AMDGPU_MAX_BL_LEVEL |
| + caps.min_input_signal * 0x101; |
| |
| if (dc_link_set_backlight_level(dm->backlight_link, |
| brightness, 0, 0)) |
| return 0; |
| else |
| return 1; |
| } |
| |
| static int amdgpu_dm_backlight_get_brightness(struct backlight_device *bd) |
| { |
| struct amdgpu_display_manager *dm = bl_get_data(bd); |
| int ret = dc_link_get_backlight_level(dm->backlight_link); |
| |
| if (ret == DC_ERROR_UNEXPECTED) |
| return bd->props.brightness; |
| return ret; |
| } |
| |
| static const struct backlight_ops amdgpu_dm_backlight_ops = { |
| .get_brightness = amdgpu_dm_backlight_get_brightness, |
| .update_status = amdgpu_dm_backlight_update_status, |
| }; |
| |
| static void |
| amdgpu_dm_register_backlight_device(struct amdgpu_display_manager *dm) |
| { |
| char bl_name[16]; |
| struct backlight_properties props = { 0 }; |
| |
| amdgpu_dm_update_backlight_caps(dm); |
| |
| props.max_brightness = AMDGPU_MAX_BL_LEVEL; |
| props.brightness = AMDGPU_MAX_BL_LEVEL; |
| props.type = BACKLIGHT_RAW; |
| |
| snprintf(bl_name, sizeof(bl_name), "amdgpu_bl%d", |
| dm->adev->ddev->primary->index); |
| |
| dm->backlight_dev = backlight_device_register(bl_name, |
| dm->adev->ddev->dev, |
| dm, |
| &amdgpu_dm_backlight_ops, |
| &props); |
| |
| if (IS_ERR(dm->backlight_dev)) |
| DRM_ERROR("DM: Backlight registration failed!\n"); |
| else |
| DRM_DEBUG_DRIVER("DM: Registered Backlight device: %s\n", bl_name); |
| } |
| |
| #endif |
| |
| static int initialize_plane(struct amdgpu_display_manager *dm, |
| struct amdgpu_mode_info *mode_info, |
| int plane_id) |
| { |
| struct drm_plane *plane; |
| unsigned long possible_crtcs; |
| int ret = 0; |
| |
| plane = kzalloc(sizeof(struct drm_plane), GFP_KERNEL); |
| mode_info->planes[plane_id] = plane; |
| |
| if (!plane) { |
| DRM_ERROR("KMS: Failed to allocate plane\n"); |
| return -ENOMEM; |
| } |
| plane->type = mode_info->plane_type[plane_id]; |
| |
| /* |
| * HACK: IGT tests expect that each plane can only have |
| * one possible CRTC. For now, set one CRTC for each |
| * plane that is not an underlay, but still allow multiple |
| * CRTCs for underlay planes. |
| */ |
| possible_crtcs = 1 << plane_id; |
| if (plane_id >= dm->dc->caps.max_streams) |
| possible_crtcs = 0xff; |
| |
| ret = amdgpu_dm_plane_init(dm, mode_info->planes[plane_id], possible_crtcs); |
| |
| if (ret) { |
| DRM_ERROR("KMS: Failed to initialize plane\n"); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| |
| static void register_backlight_device(struct amdgpu_display_manager *dm, |
| struct dc_link *link) |
| { |
| #if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) ||\ |
| defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) |
| |
| if ((link->connector_signal & (SIGNAL_TYPE_EDP | SIGNAL_TYPE_LVDS)) && |
| link->type != dc_connection_none) { |
| /* |
| * Event if registration failed, we should continue with |
| * DM initialization because not having a backlight control |
| * is better then a black screen. |
| */ |
| amdgpu_dm_register_backlight_device(dm); |
| |
| if (dm->backlight_dev) |
| dm->backlight_link = link; |
| } |
| #endif |
| } |
| |
| |
| /* |
| * In this architecture, the association |
| * connector -> encoder -> crtc |
| * id not really requried. The crtc and connector will hold the |
| * display_index as an abstraction to use with DAL component |
| * |
| * Returns 0 on success |
| */ |
| static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev) |
| { |
| struct amdgpu_display_manager *dm = &adev->dm; |
| int32_t i; |
| struct amdgpu_dm_connector *aconnector = NULL; |
| struct amdgpu_encoder *aencoder = NULL; |
| struct amdgpu_mode_info *mode_info = &adev->mode_info; |
| uint32_t link_cnt; |
| int32_t total_overlay_planes, total_primary_planes; |
| enum dc_connection_type new_connection_type = dc_connection_none; |
| |
| link_cnt = dm->dc->caps.max_links; |
| if (amdgpu_dm_mode_config_init(dm->adev)) { |
| DRM_ERROR("DM: Failed to initialize mode config\n"); |
| return -EINVAL; |
| } |
| |
| /* Identify the number of planes to be initialized */ |
| total_overlay_planes = dm->dc->caps.max_slave_planes; |
| total_primary_planes = dm->dc->caps.max_planes - dm->dc->caps.max_slave_planes; |
| |
| /* First initialize overlay planes, index starting after primary planes */ |
| for (i = (total_overlay_planes - 1); i >= 0; i--) { |
| if (initialize_plane(dm, mode_info, (total_primary_planes + i))) { |
| DRM_ERROR("KMS: Failed to initialize overlay plane\n"); |
| goto fail; |
| } |
| } |
| |
| /* Initialize primary planes */ |
| for (i = (total_primary_planes - 1); i >= 0; i--) { |
| if (initialize_plane(dm, mode_info, i)) { |
| DRM_ERROR("KMS: Failed to initialize primary plane\n"); |
| goto fail; |
| } |
| } |
| |
| for (i = 0; i < dm->dc->caps.max_streams; i++) |
| if (amdgpu_dm_crtc_init(dm, mode_info->planes[i], i)) { |
| DRM_ERROR("KMS: Failed to initialize crtc\n"); |
| goto fail; |
| } |
| |
| dm->display_indexes_num = dm->dc->caps.max_streams; |
| |
| /* loops over all connectors on the board */ |
| for (i = 0; i < link_cnt; i++) { |
| struct dc_link *link = NULL; |
| |
| if (i > AMDGPU_DM_MAX_DISPLAY_INDEX) { |
| DRM_ERROR( |
| "KMS: Cannot support more than %d display indexes\n", |
| AMDGPU_DM_MAX_DISPLAY_INDEX); |
| continue; |
| } |
| |
| aconnector = kzalloc(sizeof(*aconnector), GFP_KERNEL); |
| if (!aconnector) |
| goto fail; |
| |
| aencoder = kzalloc(sizeof(*aencoder), GFP_KERNEL); |
| if (!aencoder) |
| goto fail; |
| |
| if (amdgpu_dm_encoder_init(dm->ddev, aencoder, i)) { |
| DRM_ERROR("KMS: Failed to initialize encoder\n"); |
| goto fail; |
| } |
| |
| if (amdgpu_dm_connector_init(dm, aconnector, i, aencoder)) { |
| DRM_ERROR("KMS: Failed to initialize connector\n"); |
| goto fail; |
| } |
| |
| link = dc_get_link_at_index(dm->dc, i); |
| |
| if (!dc_link_detect_sink(link, &new_connection_type)) |
| DRM_ERROR("KMS: Failed to detect connector\n"); |
| |
| if (aconnector->base.force && new_connection_type == dc_connection_none) { |
| emulated_link_detect(link); |
| amdgpu_dm_update_connector_after_detect(aconnector); |
| |
| } else if (dc_link_detect(link, DETECT_REASON_BOOT)) { |
| amdgpu_dm_update_connector_after_detect(aconnector); |
| register_backlight_device(dm, link); |
| } |
| |
| |
| } |
| |
| /* Software is initialized. Now we can register interrupt handlers. */ |
| switch (adev->asic_type) { |
| case CHIP_BONAIRE: |
| case CHIP_HAWAII: |
| case CHIP_KAVERI: |
| case CHIP_KABINI: |
| case CHIP_MULLINS: |
| case CHIP_TONGA: |
| case CHIP_FIJI: |
| case CHIP_CARRIZO: |
| case CHIP_STONEY: |
| case CHIP_POLARIS11: |
| case CHIP_POLARIS10: |
| case CHIP_POLARIS12: |
| case CHIP_VEGAM: |
| case CHIP_VEGA10: |
| case CHIP_VEGA12: |
| case CHIP_VEGA20: |
| if (dce110_register_irq_handlers(dm->adev)) { |
| DRM_ERROR("DM: Failed to initialize IRQ\n"); |
| goto fail; |
| } |
| break; |
| #if defined(CONFIG_DRM_AMD_DC_DCN1_0) |
| case CHIP_RAVEN: |
| if (dcn10_register_irq_handlers(dm->adev)) { |
| DRM_ERROR("DM: Failed to initialize IRQ\n"); |
| goto fail; |
| } |
| break; |
| #endif |
| default: |
| DRM_ERROR("Unsupported ASIC type: 0x%X\n", adev->asic_type); |
| goto fail; |
| } |
| |
| if (adev->asic_type != CHIP_CARRIZO && adev->asic_type != CHIP_STONEY) |
| dm->dc->debug.disable_stutter = amdgpu_pp_feature_mask & PP_STUTTER_MODE ? false : true; |
| |
| return 0; |
| fail: |
| kfree(aencoder); |
| kfree(aconnector); |
| for (i = 0; i < dm->dc->caps.max_planes; i++) |
| kfree(mode_info->planes[i]); |
| return -EINVAL; |
| } |
| |
| static void amdgpu_dm_destroy_drm_device(struct amdgpu_display_manager *dm) |
| { |
| drm_mode_config_cleanup(dm->ddev); |
| drm_atomic_private_obj_fini(&dm->atomic_obj); |
| return; |
| } |
| |
| /****************************************************************************** |
| * amdgpu_display_funcs functions |
| *****************************************************************************/ |
| |
| /* |
| * dm_bandwidth_update - program display watermarks |
| * |
| * @adev: amdgpu_device pointer |
| * |
| * Calculate and program the display watermarks and line buffer allocation. |
| */ |
| static void dm_bandwidth_update(struct amdgpu_device *adev) |
| { |
| /* TODO: implement later */ |
| } |
| |
| static const struct amdgpu_display_funcs dm_display_funcs = { |
| .bandwidth_update = dm_bandwidth_update, /* called unconditionally */ |
| .vblank_get_counter = dm_vblank_get_counter,/* called unconditionally */ |
| .backlight_set_level = NULL, /* never called for DC */ |
| .backlight_get_level = NULL, /* never called for DC */ |
| .hpd_sense = NULL,/* called unconditionally */ |
| .hpd_set_polarity = NULL, /* called unconditionally */ |
| .hpd_get_gpio_reg = NULL, /* VBIOS parsing. DAL does it. */ |
| .page_flip_get_scanoutpos = |
| dm_crtc_get_scanoutpos,/* called unconditionally */ |
| .add_encoder = NULL, /* VBIOS parsing. DAL does it. */ |
| .add_connector = NULL, /* VBIOS parsing. DAL does it. */ |
| }; |
| |
| #if defined(CONFIG_DEBUG_KERNEL_DC) |
| |
| static ssize_t s3_debug_store(struct device *device, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t count) |
| { |
| int ret; |
| int s3_state; |
| struct pci_dev *pdev = to_pci_dev(device); |
| struct drm_device *drm_dev = pci_get_drvdata(pdev); |
| struct amdgpu_device *adev = drm_dev->dev_private; |
| |
| ret = kstrtoint(buf, 0, &s3_state); |
| |
| if (ret == 0) { |
| if (s3_state) { |
| dm_resume(adev); |
| drm_kms_helper_hotplug_event(adev->ddev); |
| } else |
| dm_suspend(adev); |
| } |
| |
| return ret == 0 ? count : 0; |
| } |
| |
| DEVICE_ATTR_WO(s3_debug); |
| |
| #endif |
| |
| static int dm_early_init(void *handle) |
| { |
| struct amdgpu_device *adev = (struct amdgpu_device *)handle; |
| |
| switch (adev->asic_type) { |
| case CHIP_BONAIRE: |
| case CHIP_HAWAII: |
| adev->mode_info.num_crtc = 6; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 6; |
| adev->mode_info.plane_type = dm_plane_type_default; |
| break; |
| case CHIP_KAVERI: |
| adev->mode_info.num_crtc = 4; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 7; |
| adev->mode_info.plane_type = dm_plane_type_default; |
| break; |
| case CHIP_KABINI: |
| case CHIP_MULLINS: |
| adev->mode_info.num_crtc = 2; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 6; |
| adev->mode_info.plane_type = dm_plane_type_default; |
| break; |
| case CHIP_FIJI: |
| case CHIP_TONGA: |
| adev->mode_info.num_crtc = 6; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 7; |
| adev->mode_info.plane_type = dm_plane_type_default; |
| break; |
| case CHIP_CARRIZO: |
| adev->mode_info.num_crtc = 3; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 9; |
| adev->mode_info.plane_type = dm_plane_type_carizzo; |
| break; |
| case CHIP_STONEY: |
| adev->mode_info.num_crtc = 2; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 9; |
| adev->mode_info.plane_type = dm_plane_type_stoney; |
| break; |
| case CHIP_POLARIS11: |
| case CHIP_POLARIS12: |
| adev->mode_info.num_crtc = 5; |
| adev->mode_info.num_hpd = 5; |
| adev->mode_info.num_dig = 5; |
| adev->mode_info.plane_type = dm_plane_type_default; |
| break; |
| case CHIP_POLARIS10: |
| case CHIP_VEGAM: |
| adev->mode_info.num_crtc = 6; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 6; |
| adev->mode_info.plane_type = dm_plane_type_default; |
| break; |
| case CHIP_VEGA10: |
| case CHIP_VEGA12: |
| case CHIP_VEGA20: |
| adev->mode_info.num_crtc = 6; |
| adev->mode_info.num_hpd = 6; |
| adev->mode_info.num_dig = 6; |
| adev->mode_info.plane_type = dm_plane_type_default; |
| break; |
| #if defined(CONFIG_DRM_AMD_DC_DCN1_0) |
| case CHIP_RAVEN: |
| adev->mode_info.num_crtc = 4; |
| adev->mode_info.num_hpd = 4; |
| adev->mode_info.num_dig = 4; |
| adev->mode_info.plane_type = dm_plane_type_default; |
| break; |
| #endif |
| default: |
| DRM_ERROR("Unsupported ASIC type: 0x%X\n", adev->asic_type); |
| return -EINVAL; |
| } |
| |
| amdgpu_dm_set_irq_funcs(adev); |
| |
| if (adev->mode_info.funcs == NULL) |
| adev->mode_info.funcs = &dm_display_funcs; |
| |
| /* |
| * Note: Do NOT change adev->audio_endpt_rreg and |
| * adev->audio_endpt_wreg because they are initialised in |
| * amdgpu_device_init() |
| */ |
| #if defined(CONFIG_DEBUG_KERNEL_DC) |
| device_create_file( |
| adev->ddev->dev, |
| &dev_attr_s3_debug); |
| #endif |
| |
| return 0; |
| } |
| |
| static bool modeset_required(struct drm_crtc_state *crtc_state, |
| struct dc_stream_state *new_stream, |
| struct dc_stream_state *old_stream) |
| { |
| if (!drm_atomic_crtc_needs_modeset(crtc_state)) |
| return false; |
| |
| if (!crtc_state->enable) |
| return false; |
| |
| return crtc_state->active; |
| } |
| |
| static bool modereset_required(struct drm_crtc_state *crtc_state) |
| { |
| if (!drm_atomic_crtc_needs_modeset(crtc_state)) |
| return false; |
| |
| return !crtc_state->enable || !crtc_state->active; |
| } |
| |
| static void amdgpu_dm_encoder_destroy(struct drm_encoder *encoder) |
| { |
| drm_encoder_cleanup(encoder); |
| kfree(encoder); |
| } |
| |
| static const struct drm_encoder_funcs amdgpu_dm_encoder_funcs = { |
| .destroy = amdgpu_dm_encoder_destroy, |
| }; |
| |
| static bool fill_rects_from_plane_state(const struct drm_plane_state *state, |
| struct dc_plane_state *plane_state) |
| { |
| plane_state->src_rect.x = state->src_x >> 16; |
| plane_state->src_rect.y = state->src_y >> 16; |
| /* we ignore the mantissa for now and do not deal with floating pixels :( */ |
| plane_state->src_rect.width = state->src_w >> 16; |
| |
| if (plane_state->src_rect.width == 0) |
| return false; |
| |
| plane_state->src_rect.height = state->src_h >> 16; |
| if (plane_state->src_rect.height == 0) |
| return false; |
| |
| plane_state->dst_rect.x = state->crtc_x; |
| plane_state->dst_rect.y = state->crtc_y; |
| |
| if (state->crtc_w == 0) |
| return false; |
| |
| plane_state->dst_rect.width = state->crtc_w; |
| |
| if (state->crtc_h == 0) |
| return false; |
| |
| plane_state->dst_rect.height = state->crtc_h; |
| |
| plane_state->clip_rect = plane_state->dst_rect; |
| |
| switch (state->rotation & DRM_MODE_ROTATE_MASK) { |
| case DRM_MODE_ROTATE_0: |
| plane_state->rotation = ROTATION_ANGLE_0; |
| break; |
| case DRM_MODE_ROTATE_90: |
| plane_state->rotation = ROTATION_ANGLE_90; |
| break; |
| case DRM_MODE_ROTATE_180: |
| plane_state->rotation = ROTATION_ANGLE_180; |
| break; |
| case DRM_MODE_ROTATE_270: |
| plane_state->rotation = ROTATION_ANGLE_270; |
| break; |
| default: |
| plane_state->rotation = ROTATION_ANGLE_0; |
| break; |
| } |
| |
| return true; |
| } |
| static int get_fb_info(const struct amdgpu_framebuffer *amdgpu_fb, |
| uint64_t *tiling_flags) |
| { |
| struct amdgpu_bo *rbo = gem_to_amdgpu_bo(amdgpu_fb->base.obj[0]); |
| int r = amdgpu_bo_reserve(rbo, false); |
| |
| if (unlikely(r)) { |
| /* Don't show error message when returning -ERESTARTSYS */ |
| if (r != -ERESTARTSYS) |
| DRM_ERROR("Unable to reserve buffer: %d\n", r); |
| return r; |
| } |
| |
| if (tiling_flags) |
| amdgpu_bo_get_tiling_flags(rbo, tiling_flags); |
| |
| amdgpu_bo_unreserve(rbo); |
| |
| return r; |
| } |
| |
| static int fill_plane_attributes_from_fb(struct amdgpu_device *adev, |
| struct dc_plane_state *plane_state, |
| const struct amdgpu_framebuffer *amdgpu_fb) |
| { |
| uint64_t tiling_flags; |
| unsigned int awidth; |
| const struct drm_framebuffer *fb = &amdgpu_fb->base; |
| int ret = 0; |
| struct drm_format_name_buf format_name; |
| |
| ret = get_fb_info( |
| amdgpu_fb, |
| &tiling_flags); |
| |
| if (ret) |
| return ret; |
| |
| switch (fb->format->format) { |
| case DRM_FORMAT_C8: |
| plane_state->format = SURFACE_PIXEL_FORMAT_GRPH_PALETA_256_COLORS; |
| break; |
| case DRM_FORMAT_RGB565: |
| plane_state->format = SURFACE_PIXEL_FORMAT_GRPH_RGB565; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| case DRM_FORMAT_ARGB8888: |
| plane_state->format = SURFACE_PIXEL_FORMAT_GRPH_ARGB8888; |
| break; |
| case DRM_FORMAT_XRGB2101010: |
| case DRM_FORMAT_ARGB2101010: |
| plane_state->format = SURFACE_PIXEL_FORMAT_GRPH_ARGB2101010; |
| break; |
| case DRM_FORMAT_XBGR2101010: |
| case DRM_FORMAT_ABGR2101010: |
| plane_state->format = SURFACE_PIXEL_FORMAT_GRPH_ABGR2101010; |
| break; |
| case DRM_FORMAT_XBGR8888: |
| case DRM_FORMAT_ABGR8888: |
| plane_state->format = SURFACE_PIXEL_FORMAT_GRPH_ABGR8888; |
| break; |
| case DRM_FORMAT_NV21: |
| plane_state->format = SURFACE_PIXEL_FORMAT_VIDEO_420_YCbCr; |
| break; |
| case DRM_FORMAT_NV12: |
| plane_state->format = SURFACE_PIXEL_FORMAT_VIDEO_420_YCrCb; |
| break; |
| default: |
| DRM_ERROR("Unsupported screen format %s\n", |
| drm_get_format_name(fb->format->format, &format_name)); |
| return -EINVAL; |
| } |
| |
| if (plane_state->format < SURFACE_PIXEL_FORMAT_VIDEO_BEGIN) { |
| plane_state->address.type = PLN_ADDR_TYPE_GRAPHICS; |
| plane_state->plane_size.grph.surface_size.x = 0; |
| plane_state->plane_size.grph.surface_size.y = 0; |
| plane_state->plane_size.grph.surface_size.width = fb->width; |
| plane_state->plane_size.grph.surface_size.height = fb->height; |
| plane_state->plane_size.grph.surface_pitch = |
| fb->pitches[0] / fb->format->cpp[0]; |
| /* TODO: unhardcode */ |
| plane_state->color_space = COLOR_SPACE_SRGB; |
| |
| } else { |
| awidth = ALIGN(fb->width, 64); |
| plane_state->address.type = PLN_ADDR_TYPE_VIDEO_PROGRESSIVE; |
| plane_state->plane_size.video.luma_size.x = 0; |
| plane_state->plane_size.video.luma_size.y = 0; |
| plane_state->plane_size.video.luma_size.width = awidth; |
| plane_state->plane_size.video.luma_size.height = fb->height; |
| /* TODO: unhardcode */ |
| plane_state->plane_size.video.luma_pitch = awidth; |
| |
| plane_state->plane_size.video.chroma_size.x = 0; |
| plane_state->plane_size.video.chroma_size.y = 0; |
| plane_state->plane_size.video.chroma_size.width = awidth; |
| plane_state->plane_size.video.chroma_size.height = fb->height; |
| plane_state->plane_size.video.chroma_pitch = awidth / 2; |
| |
| /* TODO: unhardcode */ |
| plane_state->color_space = COLOR_SPACE_YCBCR709; |
| } |
| |
| memset(&plane_state->tiling_info, 0, sizeof(plane_state->tiling_info)); |
| |
| /* Fill GFX8 params */ |
| if (AMDGPU_TILING_GET(tiling_flags, ARRAY_MODE) == DC_ARRAY_2D_TILED_THIN1) { |
| unsigned int bankw, bankh, mtaspect, tile_split, num_banks; |
| |
| bankw = AMDGPU_TILING_GET(tiling_flags, BANK_WIDTH); |
| bankh = AMDGPU_TILING_GET(tiling_flags, BANK_HEIGHT); |
| mtaspect = AMDGPU_TILING_GET(tiling_flags, MACRO_TILE_ASPECT); |
| tile_split = AMDGPU_TILING_GET(tiling_flags, TILE_SPLIT); |
| num_banks = AMDGPU_TILING_GET(tiling_flags, NUM_BANKS); |
| |
| /* XXX fix me for VI */ |
| plane_state->tiling_info.gfx8.num_banks = num_banks; |
| plane_state->tiling_info.gfx8.array_mode = |
| DC_ARRAY_2D_TILED_THIN1; |
| plane_state->tiling_info.gfx8.tile_split = tile_split; |
| plane_state->tiling_info.gfx8.bank_width = bankw; |
| plane_state->tiling_info.gfx8.bank_height = bankh; |
| plane_state->tiling_info.gfx8.tile_aspect = mtaspect; |
| plane_state->tiling_info.gfx8.tile_mode = |
| DC_ADDR_SURF_MICRO_TILING_DISPLAY; |
| } else if (AMDGPU_TILING_GET(tiling_flags, ARRAY_MODE) |
| == DC_ARRAY_1D_TILED_THIN1) { |
| plane_state->tiling_info.gfx8.array_mode = DC_ARRAY_1D_TILED_THIN1; |
| } |
| |
| plane_state->tiling_info.gfx8.pipe_config = |
| AMDGPU_TILING_GET(tiling_flags, PIPE_CONFIG); |
| |
| if (adev->asic_type == CHIP_VEGA10 || |
| adev->asic_type == CHIP_VEGA12 || |
| adev->asic_type == CHIP_VEGA20 || |
| adev->asic_type == CHIP_RAVEN) { |
| /* Fill GFX9 params */ |
| plane_state->tiling_info.gfx9.num_pipes = |
| adev->gfx.config.gb_addr_config_fields.num_pipes; |
| plane_state->tiling_info.gfx9.num_banks = |
| adev->gfx.config.gb_addr_config_fields.num_banks; |
| plane_state->tiling_info.gfx9.pipe_interleave = |
| adev->gfx.config.gb_addr_config_fields.pipe_interleave_size; |
| plane_state->tiling_info.gfx9.num_shader_engines = |
| adev->gfx.config.gb_addr_config_fields.num_se; |
| plane_state->tiling_info.gfx9.max_compressed_frags = |
| adev->gfx.config.gb_addr_config_fields.max_compress_frags; |
| plane_state->tiling_info.gfx9.num_rb_per_se = |
| adev->gfx.config.gb_addr_config_fields.num_rb_per_se; |
| plane_state->tiling_info.gfx9.swizzle = |
| AMDGPU_TILING_GET(tiling_flags, SWIZZLE_MODE); |
| plane_state->tiling_info.gfx9.shaderEnable = 1; |
| } |
| |
| plane_state->visible = true; |
| plane_state->scaling_quality.h_taps_c = 0; |
| plane_state->scaling_quality.v_taps_c = 0; |
| |
| /* is this needed? is plane_state zeroed at allocation? */ |
| plane_state->scaling_quality.h_taps = 0; |
| plane_state->scaling_quality.v_taps = 0; |
| plane_state->stereo_format = PLANE_STEREO_FORMAT_NONE; |
| |
| return ret; |
| |
| } |
| |
| static int fill_plane_attributes(struct amdgpu_device *adev, |
| struct dc_plane_state *dc_plane_state, |
| struct drm_plane_state *plane_state, |
| struct drm_crtc_state *crtc_state) |
| { |
| const struct amdgpu_framebuffer *amdgpu_fb = |
| to_amdgpu_framebuffer(plane_state->fb); |
| const struct drm_crtc *crtc = plane_state->crtc; |
| int ret = 0; |
| |
| if (!fill_rects_from_plane_state(plane_state, dc_plane_state)) |
| return -EINVAL; |
| |
| ret = fill_plane_attributes_from_fb( |
| crtc->dev->dev_private, |
| dc_plane_state, |
| amdgpu_fb); |
| |
| if (ret) |
| return ret; |
| |
| /* |
| * Always set input transfer function, since plane state is refreshed |
| * every time. |
| */ |
| ret = amdgpu_dm_set_degamma_lut(crtc_state, dc_plane_state); |
| if (ret) { |
| dc_transfer_func_release(dc_plane_state->in_transfer_func); |
| dc_plane_state->in_transfer_func = NULL; |
| } |
| |
| return ret; |
| } |
| |
| static void update_stream_scaling_settings(const struct drm_display_mode *mode, |
| const struct dm_connector_state *dm_state, |
| struct dc_stream_state *stream) |
| { |
| enum amdgpu_rmx_type rmx_type; |
| |
| struct rect src = { 0 }; /* viewport in composition space*/ |
| struct rect dst = { 0 }; /* stream addressable area */ |
| |
| /* no mode. nothing to be done */ |
| if (!mode) |
| return; |
| |
| /* Full screen scaling by default */ |
| src.width = mode->hdisplay; |
| src.height = mode->vdisplay; |
| dst.width = stream->timing.h_addressable; |
| dst.height = stream->timing.v_addressable; |
| |
| if (dm_state) { |
| rmx_type = dm_state->scaling; |
| if (rmx_type == RMX_ASPECT || rmx_type == RMX_OFF) { |
| if (src.width * dst.height < |
| src.height * dst.width) { |
| /* height needs less upscaling/more downscaling */ |
| dst.width = src.width * |
| dst.height / src.height; |
| } else { |
| /* width needs less upscaling/more downscaling */ |
| dst.height = src.height * |
| dst.width / src.width; |
| } |
| } else if (rmx_type == RMX_CENTER) { |
| dst = src; |
| } |
| |
| dst.x = (stream->timing.h_addressable - dst.width) / 2; |
| dst.y = (stream->timing.v_addressable - dst.height) / 2; |
| |
| if (dm_state->underscan_enable) { |
| dst.x += dm_state->underscan_hborder / 2; |
| dst.y += dm_state->underscan_vborder / 2; |
| dst.width -= dm_state->underscan_hborder; |
| dst.height -= dm_state->underscan_vborder; |
| } |
| } |
| |
| stream->src = src; |
| stream->dst = dst; |
| |
| DRM_DEBUG_DRIVER("Destination Rectangle x:%d y:%d width:%d height:%d\n", |
| dst.x, dst.y, dst.width, dst.height); |
| |
| } |
| |
| static enum dc_color_depth |
| convert_color_depth_from_display_info(const struct drm_connector *connector) |
| { |
| struct dm_connector_state *dm_conn_state = |
| to_dm_connector_state(connector->state); |
| uint32_t bpc = connector->display_info.bpc; |
| |
| /* TODO: Remove this when there's support for max_bpc in drm */ |
| if (dm_conn_state && bpc > dm_conn_state->max_bpc) |
| /* Round down to nearest even number. */ |
| bpc = dm_conn_state->max_bpc - (dm_conn_state->max_bpc & 1); |
| |
| switch (bpc) { |
| case 0: |
| /* |
| * Temporary Work around, DRM doesn't parse color depth for |
| * EDID revision before 1.4 |
| * TODO: Fix edid parsing |
| */ |
| return COLOR_DEPTH_888; |
| case 6: |
| return COLOR_DEPTH_666; |
| case 8: |
| return COLOR_DEPTH_888; |
| case 10: |
| return COLOR_DEPTH_101010; |
| case 12: |
| return COLOR_DEPTH_121212; |
| case 14: |
| return COLOR_DEPTH_141414; |
| case 16: |
| return COLOR_DEPTH_161616; |
| default: |
| return COLOR_DEPTH_UNDEFINED; |
| } |
| } |
| |
| static enum dc_aspect_ratio |
| get_aspect_ratio(const struct drm_display_mode *mode_in) |
| { |
| /* 1-1 mapping, since both enums follow the HDMI spec. */ |
| return (enum dc_aspect_ratio) mode_in->picture_aspect_ratio; |
| } |
| |
| static enum dc_color_space |
| get_output_color_space(const struct dc_crtc_timing *dc_crtc_timing) |
| { |
| enum dc_color_space color_space = COLOR_SPACE_SRGB; |
| |
| switch (dc_crtc_timing->pixel_encoding) { |
| case PIXEL_ENCODING_YCBCR422: |
| case PIXEL_ENCODING_YCBCR444: |
| case PIXEL_ENCODING_YCBCR420: |
| { |
| /* |
| * 27030khz is the separation point between HDTV and SDTV |
| * according to HDMI spec, we use YCbCr709 and YCbCr601 |
| * respectively |
| */ |
| if (dc_crtc_timing->pix_clk_khz > 27030) { |
| if (dc_crtc_timing->flags.Y_ONLY) |
| color_space = |
| COLOR_SPACE_YCBCR709_LIMITED; |
| else |
| color_space = COLOR_SPACE_YCBCR709; |
| } else { |
| if (dc_crtc_timing->flags.Y_ONLY) |
| color_space = |
| COLOR_SPACE_YCBCR601_LIMITED; |
| else |
| color_space = COLOR_SPACE_YCBCR601; |
| } |
| |
| } |
| break; |
| case PIXEL_ENCODING_RGB: |
| color_space = COLOR_SPACE_SRGB; |
| break; |
| |
| default: |
| WARN_ON(1); |
| break; |
| } |
| |
| return color_space; |
| } |
| |
| static void reduce_mode_colour_depth(struct dc_crtc_timing *timing_out) |
| { |
| if (timing_out->display_color_depth <= COLOR_DEPTH_888) |
| return; |
| |
| timing_out->display_color_depth--; |
| } |
| |
| static void adjust_colour_depth_from_display_info(struct dc_crtc_timing *timing_out, |
| const struct drm_display_info *info) |
| { |
| int normalized_clk; |
| if (timing_out->display_color_depth <= COLOR_DEPTH_888) |
| return; |
| do { |
| normalized_clk = timing_out->pix_clk_khz; |
| /* YCbCr 4:2:0 requires additional adjustment of 1/2 */ |
| if (timing_out->pixel_encoding == PIXEL_ENCODING_YCBCR420) |
| normalized_clk /= 2; |
| /* Adjusting pix clock following on HDMI spec based on colour depth */ |
| switch (timing_out->display_color_depth) { |
| case COLOR_DEPTH_101010: |
| normalized_clk = (normalized_clk * 30) / 24; |
| break; |
| case COLOR_DEPTH_121212: |
| normalized_clk = (normalized_clk * 36) / 24; |
| break; |
| case COLOR_DEPTH_161616: |
| normalized_clk = (normalized_clk * 48) / 24; |
| break; |
| default: |
| return; |
| } |
| if (normalized_clk <= info->max_tmds_clock) |
| return; |
| reduce_mode_colour_depth(timing_out); |
| |
| } while (timing_out->display_color_depth > COLOR_DEPTH_888); |
| |
| } |
| |
| static void |
| fill_stream_properties_from_drm_display_mode(struct dc_stream_state *stream, |
| const struct drm_display_mode *mode_in, |
| const struct drm_connector *connector, |
| const struct dc_stream_state *old_stream) |
| { |
| struct dc_crtc_timing *timing_out = &stream->timing; |
| const struct drm_display_info *info = &connector->display_info; |
| |
| memset(timing_out, 0, sizeof(struct dc_crtc_timing)); |
| |
| timing_out->h_border_left = 0; |
| timing_out->h_border_right = 0; |
| timing_out->v_border_top = 0; |
| timing_out->v_border_bottom = 0; |
| /* TODO: un-hardcode */ |
| if (drm_mode_is_420_only(info, mode_in) |
| && stream->sink->sink_signal == SIGNAL_TYPE_HDMI_TYPE_A) |
| timing_out->pixel_encoding = PIXEL_ENCODING_YCBCR420; |
| else if ((connector->display_info.color_formats & DRM_COLOR_FORMAT_YCRCB444) |
| && stream->sink->sink_signal == SIGNAL_TYPE_HDMI_TYPE_A) |
| timing_out->pixel_encoding = PIXEL_ENCODING_YCBCR444; |
| else |
| timing_out->pixel_encoding = PIXEL_ENCODING_RGB; |
| |
| timing_out->timing_3d_format = TIMING_3D_FORMAT_NONE; |
| timing_out->display_color_depth = convert_color_depth_from_display_info( |
| connector); |
| timing_out->scan_type = SCANNING_TYPE_NODATA; |
| timing_out->hdmi_vic = 0; |
| |
| if(old_stream) { |
| timing_out->vic = old_stream->timing.vic; |
| timing_out->flags.HSYNC_POSITIVE_POLARITY = old_stream->timing.flags.HSYNC_POSITIVE_POLARITY; |
| timing_out->flags.VSYNC_POSITIVE_POLARITY = old_stream->timing.flags.VSYNC_POSITIVE_POLARITY; |
| } else { |
| timing_out->vic = drm_match_cea_mode(mode_in); |
| if (mode_in->flags & DRM_MODE_FLAG_PHSYNC) |
| timing_out->flags.HSYNC_POSITIVE_POLARITY = 1; |
| if (mode_in->flags & DRM_MODE_FLAG_PVSYNC) |
| timing_out->flags.VSYNC_POSITIVE_POLARITY = 1; |
| } |
| |
| timing_out->h_addressable = mode_in->crtc_hdisplay; |
| timing_out->h_total = mode_in->crtc_htotal; |
| timing_out->h_sync_width = |
| mode_in->crtc_hsync_end - mode_in->crtc_hsync_start; |
| timing_out->h_front_porch = |
| mode_in->crtc_hsync_start - mode_in->crtc_hdisplay; |
| timing_out->v_total = mode_in->crtc_vtotal; |
| timing_out->v_addressable = mode_in->crtc_vdisplay; |
| timing_out->v_front_porch = |
| mode_in->crtc_vsync_start - mode_in->crtc_vdisplay; |
| timing_out->v_sync_width = |
| mode_in->crtc_vsync_end - mode_in->crtc_vsync_start; |
| timing_out->pix_clk_khz = mode_in->crtc_clock; |
| timing_out->aspect_ratio = get_aspect_ratio(mode_in); |
| |
| stream->output_color_space = get_output_color_space(timing_out); |
| |
| stream->out_transfer_func->type = TF_TYPE_PREDEFINED; |
| stream->out_transfer_func->tf = TRANSFER_FUNCTION_SRGB; |
| if (stream->sink->sink_signal == SIGNAL_TYPE_HDMI_TYPE_A) |
| adjust_colour_depth_from_display_info(timing_out, info); |
| } |
| |
| static void fill_audio_info(struct audio_info *audio_info, |
| const struct drm_connector *drm_connector, |
| const struct dc_sink *dc_sink) |
| { |
| int i = 0; |
| int cea_revision = 0; |
| const struct dc_edid_caps *edid_caps = &dc_sink->edid_caps; |
| |
| audio_info->manufacture_id = edid_caps->manufacturer_id; |
| audio_info->product_id = edid_caps->product_id; |
| |
| cea_revision = drm_connector->display_info.cea_rev; |
| |
| strscpy(audio_info->display_name, |
| edid_caps->display_name, |
| AUDIO_INFO_DISPLAY_NAME_SIZE_IN_CHARS); |
| |
| if (cea_revision >= 3) { |
| audio_info->mode_count = edid_caps->audio_mode_count; |
| |
| for (i = 0; i < audio_info->mode_count; ++i) { |
| audio_info->modes[i].format_code = |
| (enum audio_format_code) |
| (edid_caps->audio_modes[i].format_code); |
| audio_info->modes[i].channel_count = |
| edid_caps->audio_modes[i].channel_count; |
| audio_info->modes[i].sample_rates.all = |
| edid_caps->audio_modes[i].sample_rate; |
| audio_info->modes[i].sample_size = |
| edid_caps->audio_modes[i].sample_size; |
| } |
| } |
| |
| audio_info->flags.all = edid_caps->speaker_flags; |
| |
| /* TODO: We only check for the progressive mode, check for interlace mode too */ |
| if (drm_connector->latency_present[0]) { |
| audio_info->video_latency = drm_connector->video_latency[0]; |
| audio_info->audio_latency = drm_connector->audio_latency[0]; |
| } |
| |
| /* TODO: For DP, video and audio latency should be calculated from DPCD caps */ |
| |
| } |
| |
| static void |
| copy_crtc_timing_for_drm_display_mode(const struct drm_display_mode *src_mode, |
| struct drm_display_mode *dst_mode) |
| { |
| dst_mode->crtc_hdisplay = src_mode->crtc_hdisplay; |
| dst_mode->crtc_vdisplay = src_mode->crtc_vdisplay; |
| dst_mode->crtc_clock = src_mode->crtc_clock; |
| dst_mode->crtc_hblank_start = src_mode->crtc_hblank_start; |
| dst_mode->crtc_hblank_end = src_mode->crtc_hblank_end; |
| dst_mode->crtc_hsync_start = src_mode->crtc_hsync_start; |
| dst_mode->crtc_hsync_end = src_mode->crtc_hsync_end; |
| dst_mode->crtc_htotal = src_mode->crtc_htotal; |
| dst_mode->crtc_hskew = src_mode->crtc_hskew; |
| dst_mode->crtc_vblank_start = src_mode->crtc_vblank_start; |
| dst_mode->crtc_vblank_end = src_mode->crtc_vblank_end; |
| dst_mode->crtc_vsync_start = src_mode->crtc_vsync_start; |
| dst_mode->crtc_vsync_end = src_mode->crtc_vsync_end; |
| dst_mode->crtc_vtotal = src_mode->crtc_vtotal; |
| } |
| |
| static void |
| decide_crtc_timing_for_drm_display_mode(struct drm_display_mode *drm_mode, |
| const struct drm_display_mode *native_mode, |
| bool scale_enabled) |
| { |
| if (scale_enabled) { |
| copy_crtc_timing_for_drm_display_mode(native_mode, drm_mode); |
| } else if (native_mode->clock == drm_mode->clock && |
| native_mode->htotal == drm_mode->htotal && |
| native_mode->vtotal == drm_mode->vtotal) { |
| copy_crtc_timing_for_drm_display_mode(native_mode, drm_mode); |
| } else { |
| /* no scaling nor amdgpu inserted, no need to patch */ |
| } |
| } |
| |
| static struct dc_sink * |
| create_fake_sink(struct amdgpu_dm_connector *aconnector) |
| { |
| struct dc_sink_init_data sink_init_data = { 0 }; |
| struct dc_sink *sink = NULL; |
| sink_init_data.link = aconnector->dc_link; |
| sink_init_data.sink_signal = aconnector->dc_link->connector_signal; |
| |
| sink = dc_sink_create(&sink_init_data); |
| if (!sink) { |
| DRM_ERROR("Failed to create sink!\n"); |
| return NULL; |
| } |
| sink->sink_signal = SIGNAL_TYPE_VIRTUAL; |
| |
| return sink; |
| } |
| |
| static void set_multisync_trigger_params( |
| struct dc_stream_state *stream) |
| { |
| if (stream->triggered_crtc_reset.enabled) { |
| stream->triggered_crtc_reset.event = CRTC_EVENT_VSYNC_RISING; |
| stream->triggered_crtc_reset.delay = TRIGGER_DELAY_NEXT_LINE; |
| } |
| } |
| |
| static void set_master_stream(struct dc_stream_state *stream_set[], |
| int stream_count) |
| { |
| int j, highest_rfr = 0, master_stream = 0; |
| |
| for (j = 0; j < stream_count; j++) { |
| if (stream_set[j] && stream_set[j]->triggered_crtc_reset.enabled) { |
| int refresh_rate = 0; |
| |
| refresh_rate = (stream_set[j]->timing.pix_clk_khz*1000)/ |
| (stream_set[j]->timing.h_total*stream_set[j]->timing.v_total); |
| if (refresh_rate > highest_rfr) { |
| highest_rfr = refresh_rate; |
| master_stream = j; |
| } |
| } |
| } |
| for (j = 0; j < stream_count; j++) { |
| if (stream_set[j]) |
| stream_set[j]->triggered_crtc_reset.event_source = stream_set[master_stream]; |
| } |
| } |
| |
| static void dm_enable_per_frame_crtc_master_sync(struct dc_state *context) |
| { |
| int i = 0; |
| |
| if (context->stream_count < 2) |
| return; |
| for (i = 0; i < context->stream_count ; i++) { |
| if (!context->streams[i]) |
| continue; |
| /* |
| * TODO: add a function to read AMD VSDB bits and set |
| * crtc_sync_master.multi_sync_enabled flag |
| * For now it's set to false |
| */ |
| set_multisync_trigger_params(context->streams[i]); |
| } |
| set_master_stream(context->streams, context->stream_count); |
| } |
| |
| static struct dc_stream_state * |
| create_stream_for_sink(struct amdgpu_dm_connector *aconnector, |
| const struct drm_display_mode *drm_mode, |
| const struct dm_connector_state *dm_state, |
| const struct dc_stream_state *old_stream) |
| { |
| struct drm_display_mode *preferred_mode = NULL; |
| struct drm_connector *drm_connector; |
| struct dc_stream_state *stream = NULL; |
| struct drm_display_mode mode = *drm_mode; |
| bool native_mode_found = false; |
| bool scale = dm_state ? (dm_state->scaling != RMX_OFF) : false; |
| int mode_refresh; |
| int preferred_refresh = 0; |
| |
| struct dc_sink *sink = NULL; |
| if (aconnector == NULL) { |
| DRM_ERROR("aconnector is NULL!\n"); |
| return stream; |
| } |
| |
| drm_connector = &aconnector->base; |
| |
| if (!aconnector->dc_sink) { |
| if (!aconnector->mst_port) { |
| sink = create_fake_sink(aconnector); |
| if (!sink) |
| return stream; |
| } |
| } else { |
| sink = aconnector->dc_sink; |
| } |
| |
| stream = dc_create_stream_for_sink(sink); |
| |
| if (stream == NULL) { |
| DRM_ERROR("Failed to create stream for sink!\n"); |
| goto finish; |
| } |
| |
| list_for_each_entry(preferred_mode, &aconnector->base.modes, head) { |
| /* Search for preferred mode */ |
| if (preferred_mode->type & DRM_MODE_TYPE_PREFERRED) { |
| native_mode_found = true; |
| break; |
| } |
| } |
| if (!native_mode_found) |
| preferred_mode = list_first_entry_or_null( |
| &aconnector->base.modes, |
| struct drm_display_mode, |
| head); |
| |
| mode_refresh = drm_mode_vrefresh(&mode); |
| |
| if (preferred_mode == NULL) { |
| /* |
| * This may not be an error, the use case is when we have no |
| * usermode calls to reset and set mode upon hotplug. In this |
| * case, we call set mode ourselves to restore the previous mode |
| * and the modelist may not be filled in in time. |
| */ |
| DRM_DEBUG_DRIVER("No preferred mode found\n"); |
| } else { |
| decide_crtc_timing_for_drm_display_mode( |
| &mode, preferred_mode, |
| dm_state ? (dm_state->scaling != RMX_OFF) : false); |
| preferred_refresh = drm_mode_vrefresh(preferred_mode); |
| } |
| |
| if (!dm_state) |
| drm_mode_set_crtcinfo(&mode, 0); |
| |
| /* |
| * If scaling is enabled and refresh rate didn't change |
| * we copy the vic and polarities of the old timings |
| */ |
| if (!scale || mode_refresh != preferred_refresh) |
| fill_stream_properties_from_drm_display_mode(stream, |
| &mode, &aconnector->base, NULL); |
| else |
| fill_stream_properties_from_drm_display_mode(stream, |
| &mode, &aconnector->base, old_stream); |
| |
| update_stream_scaling_settings(&mode, dm_state, stream); |
| |
| fill_audio_info( |
| &stream->audio_info, |
| drm_connector, |
| sink); |
| |
| update_stream_signal(stream); |
| |
| if (dm_state && dm_state->freesync_capable) |
| stream->ignore_msa_timing_param = true; |
| |
| finish: |
| if (sink && sink->sink_signal == SIGNAL_TYPE_VIRTUAL && aconnector->base.force != DRM_FORCE_ON) |
| dc_sink_release(sink); |
| |
| return stream; |
| } |
| |
| static void amdgpu_dm_crtc_destroy(struct drm_crtc *crtc) |
| { |
| drm_crtc_cleanup(crtc); |
| kfree(crtc); |
| } |
| |
| static void dm_crtc_destroy_state(struct drm_crtc *crtc, |
| struct drm_crtc_state *state) |
| { |
| struct dm_crtc_state *cur = to_dm_crtc_state(state); |
| |
| /* TODO Destroy dc_stream objects are stream object is flattened */ |
| if (cur->stream) |
| dc_stream_release(cur->stream); |
| |
| |
| __drm_atomic_helper_crtc_destroy_state(state); |
| |
| |
| kfree(state); |
| } |
| |
| static void dm_crtc_reset_state(struct drm_crtc *crtc) |
| { |
| struct dm_crtc_state *state; |
| |
| if (crtc->state) |
| dm_crtc_destroy_state(crtc, crtc->state); |
| |
| state = kzalloc(sizeof(*state), GFP_KERNEL); |
| if (WARN_ON(!state)) |
| return; |
| |
| crtc->state = &state->base; |
| crtc->state->crtc = crtc; |
| |
| } |
| |
| static struct drm_crtc_state * |
| dm_crtc_duplicate_state(struct drm_crtc *crtc) |
| { |
| struct dm_crtc_state *state, *cur; |
| |
| cur = to_dm_crtc_state(crtc->state); |
| |
| if (WARN_ON(!crtc->state)) |
| return NULL; |
| |
| state = kzalloc(sizeof(*state), GFP_KERNEL); |
| if (!state) |
| return NULL; |
| |
| __drm_atomic_helper_crtc_duplicate_state(crtc, &state->base); |
| |
| if (cur->stream) { |
| state->stream = cur->stream; |
| dc_stream_retain(state->stream); |
| } |
| |
| state->vrr_params = cur->vrr_params; |
| state->vrr_infopacket = cur->vrr_infopacket; |
| state->abm_level = cur->abm_level; |
| state->vrr_supported = cur->vrr_supported; |
| state->freesync_config = cur->freesync_config; |
| state->crc_enabled = cur->crc_enabled; |
| |
| /* TODO Duplicate dc_stream after objects are stream object is flattened */ |
| |
| return &state->base; |
| } |
| |
| |
| static inline int dm_set_vblank(struct drm_crtc *crtc, bool enable) |
| { |
| enum dc_irq_source irq_source; |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); |
| struct amdgpu_device *adev = crtc->dev->dev_private; |
| |
| irq_source = IRQ_TYPE_VBLANK + acrtc->otg_inst; |
| return dc_interrupt_set(adev->dm.dc, irq_source, enable) ? 0 : -EBUSY; |
| } |
| |
| static int dm_enable_vblank(struct drm_crtc *crtc) |
| { |
| return dm_set_vblank(crtc, true); |
| } |
| |
| static void dm_disable_vblank(struct drm_crtc *crtc) |
| { |
| dm_set_vblank(crtc, false); |
| } |
| |
| /* Implemented only the options currently availible for the driver */ |
| static const struct drm_crtc_funcs amdgpu_dm_crtc_funcs = { |
| .reset = dm_crtc_reset_state, |
| .destroy = amdgpu_dm_crtc_destroy, |
| .gamma_set = drm_atomic_helper_legacy_gamma_set, |
| .set_config = drm_atomic_helper_set_config, |
| .page_flip = drm_atomic_helper_page_flip, |
| .atomic_duplicate_state = dm_crtc_duplicate_state, |
| .atomic_destroy_state = dm_crtc_destroy_state, |
| .set_crc_source = amdgpu_dm_crtc_set_crc_source, |
| .verify_crc_source = amdgpu_dm_crtc_verify_crc_source, |
| .enable_vblank = dm_enable_vblank, |
| .disable_vblank = dm_disable_vblank, |
| }; |
| |
| static enum drm_connector_status |
| amdgpu_dm_connector_detect(struct drm_connector *connector, bool force) |
| { |
| bool connected; |
| struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); |
| |
| /* |
| * Notes: |
| * 1. This interface is NOT called in context of HPD irq. |
| * 2. This interface *is called* in context of user-mode ioctl. Which |
| * makes it a bad place for *any* MST-related activity. |
| */ |
| |
| if (aconnector->base.force == DRM_FORCE_UNSPECIFIED && |
| !aconnector->fake_enable) |
| connected = (aconnector->dc_sink != NULL); |
| else |
| connected = (aconnector->base.force == DRM_FORCE_ON); |
| |
| return (connected ? connector_status_connected : |
| connector_status_disconnected); |
| } |
| |
| int amdgpu_dm_connector_atomic_set_property(struct drm_connector *connector, |
| struct drm_connector_state *connector_state, |
| struct drm_property *property, |
| uint64_t val) |
| { |
| struct drm_device *dev = connector->dev; |
| struct amdgpu_device *adev = dev->dev_private; |
| struct dm_connector_state *dm_old_state = |
| to_dm_connector_state(connector->state); |
| struct dm_connector_state *dm_new_state = |
| to_dm_connector_state(connector_state); |
| |
| int ret = -EINVAL; |
| |
| if (property == dev->mode_config.scaling_mode_property) { |
| enum amdgpu_rmx_type rmx_type; |
| |
| switch (val) { |
| case DRM_MODE_SCALE_CENTER: |
| rmx_type = RMX_CENTER; |
| break; |
| case DRM_MODE_SCALE_ASPECT: |
| rmx_type = RMX_ASPECT; |
| break; |
| case DRM_MODE_SCALE_FULLSCREEN: |
| rmx_type = RMX_FULL; |
| break; |
| case DRM_MODE_SCALE_NONE: |
| default: |
| rmx_type = RMX_OFF; |
| break; |
| } |
| |
| if (dm_old_state->scaling == rmx_type) |
| return 0; |
| |
| dm_new_state->scaling = rmx_type; |
| ret = 0; |
| } else if (property == adev->mode_info.underscan_hborder_property) { |
| dm_new_state->underscan_hborder = val; |
| ret = 0; |
| } else if (property == adev->mode_info.underscan_vborder_property) { |
| dm_new_state->underscan_vborder = val; |
| ret = 0; |
| } else if (property == adev->mode_info.underscan_property) { |
| dm_new_state->underscan_enable = val; |
| ret = 0; |
| } else if (property == adev->mode_info.max_bpc_property) { |
| dm_new_state->max_bpc = val; |
| ret = 0; |
| } else if (property == adev->mode_info.abm_level_property) { |
| dm_new_state->abm_level = val; |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| int amdgpu_dm_connector_atomic_get_property(struct drm_connector *connector, |
| const struct drm_connector_state *state, |
| struct drm_property *property, |
| uint64_t *val) |
| { |
| struct drm_device *dev = connector->dev; |
| struct amdgpu_device *adev = dev->dev_private; |
| struct dm_connector_state *dm_state = |
| to_dm_connector_state(state); |
| int ret = -EINVAL; |
| |
| if (property == dev->mode_config.scaling_mode_property) { |
| switch (dm_state->scaling) { |
| case RMX_CENTER: |
| *val = DRM_MODE_SCALE_CENTER; |
| break; |
| case RMX_ASPECT: |
| *val = DRM_MODE_SCALE_ASPECT; |
| break; |
| case RMX_FULL: |
| *val = DRM_MODE_SCALE_FULLSCREEN; |
| break; |
| case RMX_OFF: |
| default: |
| *val = DRM_MODE_SCALE_NONE; |
| break; |
| } |
| ret = 0; |
| } else if (property == adev->mode_info.underscan_hborder_property) { |
| *val = dm_state->underscan_hborder; |
| ret = 0; |
| } else if (property == adev->mode_info.underscan_vborder_property) { |
| *val = dm_state->underscan_vborder; |
| ret = 0; |
| } else if (property == adev->mode_info.underscan_property) { |
| *val = dm_state->underscan_enable; |
| ret = 0; |
| } else if (property == adev->mode_info.max_bpc_property) { |
| *val = dm_state->max_bpc; |
| ret = 0; |
| } else if (property == adev->mode_info.abm_level_property) { |
| *val = dm_state->abm_level; |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| static void amdgpu_dm_connector_destroy(struct drm_connector *connector) |
| { |
| struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); |
| const struct dc_link *link = aconnector->dc_link; |
| struct amdgpu_device *adev = connector->dev->dev_private; |
| struct amdgpu_display_manager *dm = &adev->dm; |
| |
| #if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) ||\ |
| defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) |
| |
| if ((link->connector_signal & (SIGNAL_TYPE_EDP | SIGNAL_TYPE_LVDS)) && |
| link->type != dc_connection_none && |
| dm->backlight_dev) { |
| backlight_device_unregister(dm->backlight_dev); |
| dm->backlight_dev = NULL; |
| } |
| #endif |
| drm_dp_cec_unregister_connector(&aconnector->dm_dp_aux.aux); |
| drm_connector_unregister(connector); |
| drm_connector_cleanup(connector); |
| kfree(connector); |
| } |
| |
| void amdgpu_dm_connector_funcs_reset(struct drm_connector *connector) |
| { |
| struct dm_connector_state *state = |
| to_dm_connector_state(connector->state); |
| |
| if (connector->state) |
| __drm_atomic_helper_connector_destroy_state(connector->state); |
| |
| kfree(state); |
| |
| state = kzalloc(sizeof(*state), GFP_KERNEL); |
| |
| if (state) { |
| state->scaling = RMX_OFF; |
| state->underscan_enable = false; |
| state->underscan_hborder = 0; |
| state->underscan_vborder = 0; |
| state->max_bpc = 8; |
| |
| __drm_atomic_helper_connector_reset(connector, &state->base); |
| } |
| } |
| |
| struct drm_connector_state * |
| amdgpu_dm_connector_atomic_duplicate_state(struct drm_connector *connector) |
| { |
| struct dm_connector_state *state = |
| to_dm_connector_state(connector->state); |
| |
| struct dm_connector_state *new_state = |
| kmemdup(state, sizeof(*state), GFP_KERNEL); |
| |
| if (!new_state) |
| return NULL; |
| |
| __drm_atomic_helper_connector_duplicate_state(connector, &new_state->base); |
| |
| new_state->freesync_capable = state->freesync_capable; |
| new_state->abm_level = state->abm_level; |
| new_state->scaling = state->scaling; |
| new_state->underscan_enable = state->underscan_enable; |
| new_state->underscan_hborder = state->underscan_hborder; |
| new_state->underscan_vborder = state->underscan_vborder; |
| new_state->max_bpc = state->max_bpc; |
| |
| return &new_state->base; |
| } |
| |
| static const struct drm_connector_funcs amdgpu_dm_connector_funcs = { |
| .reset = amdgpu_dm_connector_funcs_reset, |
| .detect = amdgpu_dm_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = amdgpu_dm_connector_destroy, |
| .atomic_duplicate_state = amdgpu_dm_connector_atomic_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| .atomic_set_property = amdgpu_dm_connector_atomic_set_property, |
| .atomic_get_property = amdgpu_dm_connector_atomic_get_property |
| }; |
| |
| static int get_modes(struct drm_connector *connector) |
| { |
| return amdgpu_dm_connector_get_modes(connector); |
| } |
| |
| static void create_eml_sink(struct amdgpu_dm_connector *aconnector) |
| { |
| struct dc_sink_init_data init_params = { |
| .link = aconnector->dc_link, |
| .sink_signal = SIGNAL_TYPE_VIRTUAL |
| }; |
| struct edid *edid; |
| |
| if (!aconnector->base.edid_blob_ptr) { |
| DRM_ERROR("No EDID firmware found on connector: %s ,forcing to OFF!\n", |
| aconnector->base.name); |
| |
| aconnector->base.force = DRM_FORCE_OFF; |
| aconnector->base.override_edid = false; |
| return; |
| } |
| |
| edid = (struct edid *) aconnector->base.edid_blob_ptr->data; |
| |
| aconnector->edid = edid; |
| |
| aconnector->dc_em_sink = dc_link_add_remote_sink( |
| aconnector->dc_link, |
| (uint8_t *)edid, |
| (edid->extensions + 1) * EDID_LENGTH, |
| &init_params); |
| |
| if (aconnector->base.force == DRM_FORCE_ON) |
| aconnector->dc_sink = aconnector->dc_link->local_sink ? |
| aconnector->dc_link->local_sink : |
| aconnector->dc_em_sink; |
| } |
| |
| static void handle_edid_mgmt(struct amdgpu_dm_connector *aconnector) |
| { |
| struct dc_link *link = (struct dc_link *)aconnector->dc_link; |
| |
| /* |
| * In case of headless boot with force on for DP managed connector |
| * Those settings have to be != 0 to get initial modeset |
| */ |
| if (link->connector_signal == SIGNAL_TYPE_DISPLAY_PORT) { |
| link->verified_link_cap.lane_count = LANE_COUNT_FOUR; |
| link->verified_link_cap.link_rate = LINK_RATE_HIGH2; |
| } |
| |
| |
| aconnector->base.override_edid = true; |
| create_eml_sink(aconnector); |
| } |
| |
| enum drm_mode_status amdgpu_dm_connector_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| int result = MODE_ERROR; |
| struct dc_sink *dc_sink; |
| struct amdgpu_device *adev = connector->dev->dev_private; |
| /* TODO: Unhardcode stream count */ |
| struct dc_stream_state *stream; |
| struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); |
| enum dc_status dc_result = DC_OK; |
| |
| if ((mode->flags & DRM_MODE_FLAG_INTERLACE) || |
| (mode->flags & DRM_MODE_FLAG_DBLSCAN)) |
| return result; |
| |
| /* |
| * Only run this the first time mode_valid is called to initilialize |
| * EDID mgmt |
| */ |
| if (aconnector->base.force != DRM_FORCE_UNSPECIFIED && |
| !aconnector->dc_em_sink) |
| handle_edid_mgmt(aconnector); |
| |
| dc_sink = to_amdgpu_dm_connector(connector)->dc_sink; |
| |
| if (dc_sink == NULL) { |
| DRM_ERROR("dc_sink is NULL!\n"); |
| goto fail; |
| } |
| |
| stream = create_stream_for_sink(aconnector, mode, NULL, NULL); |
| if (stream == NULL) { |
| DRM_ERROR("Failed to create stream for sink!\n"); |
| goto fail; |
| } |
| |
| dc_result = dc_validate_stream(adev->dm.dc, stream); |
| |
| if (dc_result == DC_OK) |
| result = MODE_OK; |
| else |
| DRM_DEBUG_KMS("Mode %dx%d (clk %d) failed DC validation with error %d\n", |
| mode->vdisplay, |
| mode->hdisplay, |
| mode->clock, |
| dc_result); |
| |
| dc_stream_release(stream); |
| |
| fail: |
| /* TODO: error handling*/ |
| return result; |
| } |
| |
| static const struct drm_connector_helper_funcs |
| amdgpu_dm_connector_helper_funcs = { |
| /* |
| * If hotplugging a second bigger display in FB Con mode, bigger resolution |
| * modes will be filtered by drm_mode_validate_size(), and those modes |
| * are missing after user start lightdm. So we need to renew modes list. |
| * in get_modes call back, not just return the modes count |
| */ |
| .get_modes = get_modes, |
| .mode_valid = amdgpu_dm_connector_mode_valid, |
| }; |
| |
| static void dm_crtc_helper_disable(struct drm_crtc *crtc) |
| { |
| } |
| |
| static int dm_crtc_helper_atomic_check(struct drm_crtc *crtc, |
| struct drm_crtc_state *state) |
| { |
| struct amdgpu_device *adev = crtc->dev->dev_private; |
| struct dc *dc = adev->dm.dc; |
| struct dm_crtc_state *dm_crtc_state = to_dm_crtc_state(state); |
| int ret = -EINVAL; |
| |
| if (unlikely(!dm_crtc_state->stream && |
| modeset_required(state, NULL, dm_crtc_state->stream))) { |
| WARN_ON(1); |
| return ret; |
| } |
| |
| /* In some use cases, like reset, no stream is attached */ |
| if (!dm_crtc_state->stream) |
| return 0; |
| |
| if (dc_validate_stream(dc, dm_crtc_state->stream) == DC_OK) |
| return 0; |
| |
| return ret; |
| } |
| |
| static bool dm_crtc_helper_mode_fixup(struct drm_crtc *crtc, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| return true; |
| } |
| |
| static const struct drm_crtc_helper_funcs amdgpu_dm_crtc_helper_funcs = { |
| .disable = dm_crtc_helper_disable, |
| .atomic_check = dm_crtc_helper_atomic_check, |
| .mode_fixup = dm_crtc_helper_mode_fixup |
| }; |
| |
| static void dm_encoder_helper_disable(struct drm_encoder *encoder) |
| { |
| |
| } |
| |
| static int dm_encoder_helper_atomic_check(struct drm_encoder *encoder, |
| struct drm_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| return 0; |
| } |
| |
| const struct drm_encoder_helper_funcs amdgpu_dm_encoder_helper_funcs = { |
| .disable = dm_encoder_helper_disable, |
| .atomic_check = dm_encoder_helper_atomic_check |
| }; |
| |
| static void dm_drm_plane_reset(struct drm_plane *plane) |
| { |
| struct dm_plane_state *amdgpu_state = NULL; |
| |
| if (plane->state) |
| plane->funcs->atomic_destroy_state(plane, plane->state); |
| |
| amdgpu_state = kzalloc(sizeof(*amdgpu_state), GFP_KERNEL); |
| WARN_ON(amdgpu_state == NULL); |
| |
| if (amdgpu_state) { |
| plane->state = &amdgpu_state->base; |
| plane->state->plane = plane; |
| plane->state->rotation = DRM_MODE_ROTATE_0; |
| } |
| } |
| |
| static struct drm_plane_state * |
| dm_drm_plane_duplicate_state(struct drm_plane *plane) |
| { |
| struct dm_plane_state *dm_plane_state, *old_dm_plane_state; |
| |
| old_dm_plane_state = to_dm_plane_state(plane->state); |
| dm_plane_state = kzalloc(sizeof(*dm_plane_state), GFP_KERNEL); |
| if (!dm_plane_state) |
| return NULL; |
| |
| __drm_atomic_helper_plane_duplicate_state(plane, &dm_plane_state->base); |
| |
| if (old_dm_plane_state->dc_state) { |
| dm_plane_state->dc_state = old_dm_plane_state->dc_state; |
| dc_plane_state_retain(dm_plane_state->dc_state); |
| } |
| |
| return &dm_plane_state->base; |
| } |
| |
| void dm_drm_plane_destroy_state(struct drm_plane *plane, |
| struct drm_plane_state *state) |
| { |
| struct dm_plane_state *dm_plane_state = to_dm_plane_state(state); |
| |
| if (dm_plane_state->dc_state) |
| dc_plane_state_release(dm_plane_state->dc_state); |
| |
| drm_atomic_helper_plane_destroy_state(plane, state); |
| } |
| |
| static const struct drm_plane_funcs dm_plane_funcs = { |
| .update_plane = drm_atomic_helper_update_plane, |
| .disable_plane = drm_atomic_helper_disable_plane, |
| .destroy = drm_primary_helper_destroy, |
| .reset = dm_drm_plane_reset, |
| .atomic_duplicate_state = dm_drm_plane_duplicate_state, |
| .atomic_destroy_state = dm_drm_plane_destroy_state, |
| }; |
| |
| static int dm_plane_helper_prepare_fb(struct drm_plane *plane, |
| struct drm_plane_state *new_state) |
| { |
| struct amdgpu_framebuffer *afb; |
| struct drm_gem_object *obj; |
| struct amdgpu_device *adev; |
| struct amdgpu_bo *rbo; |
| uint64_t chroma_addr = 0; |
| struct dm_plane_state *dm_plane_state_new, *dm_plane_state_old; |
| unsigned int awidth; |
| uint32_t domain; |
| int r; |
| |
| dm_plane_state_old = to_dm_plane_state(plane->state); |
| dm_plane_state_new = to_dm_plane_state(new_state); |
| |
| if (!new_state->fb) { |
| DRM_DEBUG_DRIVER("No FB bound\n"); |
| return 0; |
| } |
| |
| afb = to_amdgpu_framebuffer(new_state->fb); |
| obj = new_state->fb->obj[0]; |
| rbo = gem_to_amdgpu_bo(obj); |
| adev = amdgpu_ttm_adev(rbo->tbo.bdev); |
| r = amdgpu_bo_reserve(rbo, false); |
| if (unlikely(r != 0)) |
| return r; |
| |
| if (plane->type != DRM_PLANE_TYPE_CURSOR) |
| domain = amdgpu_display_supported_domains(adev); |
| else |
| domain = AMDGPU_GEM_DOMAIN_VRAM; |
| |
| r = amdgpu_bo_pin(rbo, domain); |
| if (unlikely(r != 0)) { |
| if (r != -ERESTARTSYS) |
| DRM_ERROR("Failed to pin framebuffer with error %d\n", r); |
| amdgpu_bo_unreserve(rbo); |
| return r; |
| } |
| |
| r = amdgpu_ttm_alloc_gart(&rbo->tbo); |
| if (unlikely(r != 0)) { |
| amdgpu_bo_unpin(rbo); |
| amdgpu_bo_unreserve(rbo); |
| DRM_ERROR("%p bind failed\n", rbo); |
| return r; |
| } |
| amdgpu_bo_unreserve(rbo); |
| |
| afb->address = amdgpu_bo_gpu_offset(rbo); |
| |
| amdgpu_bo_ref(rbo); |
| |
| if (dm_plane_state_new->dc_state && |
| dm_plane_state_old->dc_state != dm_plane_state_new->dc_state) { |
| struct dc_plane_state *plane_state = dm_plane_state_new->dc_state; |
| |
| if (plane_state->format < SURFACE_PIXEL_FORMAT_VIDEO_BEGIN) { |
| plane_state->address.grph.addr.low_part = lower_32_bits(afb->address); |
| plane_state->address.grph.addr.high_part = upper_32_bits(afb->address); |
| } else { |
| awidth = ALIGN(new_state->fb->width, 64); |
| plane_state->address.type = PLN_ADDR_TYPE_VIDEO_PROGRESSIVE; |
| plane_state->address.video_progressive.luma_addr.low_part |
| = lower_32_bits(afb->address); |
| plane_state->address.video_progressive.luma_addr.high_part |
| = upper_32_bits(afb->address); |
| chroma_addr = afb->address + (u64)awidth * new_state->fb->height; |
| plane_state->address.video_progressive.chroma_addr.low_part |
| = lower_32_bits(chroma_addr); |
| plane_state->address.video_progressive.chroma_addr.high_part |
| = upper_32_bits(chroma_addr); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void dm_plane_helper_cleanup_fb(struct drm_plane *plane, |
| struct drm_plane_state *old_state) |
| { |
| struct amdgpu_bo *rbo; |
| int r; |
| |
| if (!old_state->fb) |
| return; |
| |
| rbo = gem_to_amdgpu_bo(old_state->fb->obj[0]); |
| r = amdgpu_bo_reserve(rbo, false); |
| if (unlikely(r)) { |
| DRM_ERROR("failed to reserve rbo before unpin\n"); |
| return; |
| } |
| |
| amdgpu_bo_unpin(rbo); |
| amdgpu_bo_unreserve(rbo); |
| amdgpu_bo_unref(&rbo); |
| } |
| |
| static int dm_plane_atomic_check(struct drm_plane *plane, |
| struct drm_plane_state *state) |
| { |
| struct amdgpu_device *adev = plane->dev->dev_private; |
| struct dc *dc = adev->dm.dc; |
| struct dm_plane_state *dm_plane_state = to_dm_plane_state(state); |
| |
| if (!dm_plane_state->dc_state) |
| return 0; |
| |
| if (!fill_rects_from_plane_state(state, dm_plane_state->dc_state)) |
| return -EINVAL; |
| |
| if (dc_validate_plane(dc, dm_plane_state->dc_state) == DC_OK) |
| return 0; |
| |
| return -EINVAL; |
| } |
| |
| static int dm_plane_atomic_async_check(struct drm_plane *plane, |
| struct drm_plane_state *new_plane_state) |
| { |
| struct drm_plane_state *old_plane_state = |
| drm_atomic_get_old_plane_state(new_plane_state->state, plane); |
| |
| /* Only support async updates on cursor planes. */ |
| if (plane->type != DRM_PLANE_TYPE_CURSOR) |
| return -EINVAL; |
| |
| /* |
| * DRM calls prepare_fb and cleanup_fb on new_plane_state for |
| * async commits so don't allow fb changes. |
| */ |
| if (old_plane_state->fb != new_plane_state->fb) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static void dm_plane_atomic_async_update(struct drm_plane *plane, |
| struct drm_plane_state *new_state) |
| { |
| struct drm_plane_state *old_state = |
| drm_atomic_get_old_plane_state(new_state->state, plane); |
| |
| if (plane->state->fb != new_state->fb) |
| drm_atomic_set_fb_for_plane(plane->state, new_state->fb); |
| |
| plane->state->src_x = new_state->src_x; |
| plane->state->src_y = new_state->src_y; |
| plane->state->src_w = new_state->src_w; |
| plane->state->src_h = new_state->src_h; |
| plane->state->crtc_x = new_state->crtc_x; |
| plane->state->crtc_y = new_state->crtc_y; |
| plane->state->crtc_w = new_state->crtc_w; |
| plane->state->crtc_h = new_state->crtc_h; |
| |
| handle_cursor_update(plane, old_state); |
| } |
| |
| static const struct drm_plane_helper_funcs dm_plane_helper_funcs = { |
| .prepare_fb = dm_plane_helper_prepare_fb, |
| .cleanup_fb = dm_plane_helper_cleanup_fb, |
| .atomic_check = dm_plane_atomic_check, |
| .atomic_async_check = dm_plane_atomic_async_check, |
| .atomic_async_update = dm_plane_atomic_async_update |
| }; |
| |
| /* |
| * TODO: these are currently initialized to rgb formats only. |
| * For future use cases we should either initialize them dynamically based on |
| * plane capabilities, or initialize this array to all formats, so internal drm |
| * check will succeed, and let DC implement proper check |
| */ |
| static const uint32_t rgb_formats[] = { |
| DRM_FORMAT_RGB888, |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_ARGB8888, |
| DRM_FORMAT_RGBA8888, |
| DRM_FORMAT_XRGB2101010, |
| DRM_FORMAT_XBGR2101010, |
| DRM_FORMAT_ARGB2101010, |
| DRM_FORMAT_ABGR2101010, |
| DRM_FORMAT_XBGR8888, |
| DRM_FORMAT_ABGR8888, |
| }; |
| |
| static const uint32_t yuv_formats[] = { |
| DRM_FORMAT_NV12, |
| DRM_FORMAT_NV21, |
| }; |
| |
| static const u32 cursor_formats[] = { |
| DRM_FORMAT_ARGB8888 |
| }; |
| |
| static int amdgpu_dm_plane_init(struct amdgpu_display_manager *dm, |
| struct drm_plane *plane, |
| unsigned long possible_crtcs) |
| { |
| int res = -EPERM; |
| |
| switch (plane->type) { |
| case DRM_PLANE_TYPE_PRIMARY: |
| res = drm_universal_plane_init( |
| dm->adev->ddev, |
| plane, |
| possible_crtcs, |
| &dm_plane_funcs, |
| rgb_formats, |
| ARRAY_SIZE(rgb_formats), |
| NULL, plane->type, NULL); |
| break; |
| case DRM_PLANE_TYPE_OVERLAY: |
| res = drm_universal_plane_init( |
| dm->adev->ddev, |
| plane, |
| possible_crtcs, |
| &dm_plane_funcs, |
| yuv_formats, |
| ARRAY_SIZE(yuv_formats), |
| NULL, plane->type, NULL); |
| break; |
| case DRM_PLANE_TYPE_CURSOR: |
| res = drm_universal_plane_init( |
| dm->adev->ddev, |
| plane, |
| possible_crtcs, |
| &dm_plane_funcs, |
| cursor_formats, |
| ARRAY_SIZE(cursor_formats), |
| NULL, plane->type, NULL); |
| break; |
| } |
| |
| drm_plane_helper_add(plane, &dm_plane_helper_funcs); |
| |
| /* Create (reset) the plane state */ |
| if (plane->funcs->reset) |
| plane->funcs->reset(plane); |
| |
| |
| return res; |
| } |
| |
| static int amdgpu_dm_crtc_init(struct amdgpu_display_manager *dm, |
| struct drm_plane *plane, |
| uint32_t crtc_index) |
| { |
| struct amdgpu_crtc *acrtc = NULL; |
| struct drm_plane *cursor_plane; |
| |
| int res = -ENOMEM; |
| |
| cursor_plane = kzalloc(sizeof(*cursor_plane), GFP_KERNEL); |
| if (!cursor_plane) |
| goto fail; |
| |
| cursor_plane->type = DRM_PLANE_TYPE_CURSOR; |
| res = amdgpu_dm_plane_init(dm, cursor_plane, 0); |
| |
| acrtc = kzalloc(sizeof(struct amdgpu_crtc), GFP_KERNEL); |
| if (!acrtc) |
| goto fail; |
| |
| res = drm_crtc_init_with_planes( |
| dm->ddev, |
| &acrtc->base, |
| plane, |
| cursor_plane, |
| &amdgpu_dm_crtc_funcs, NULL); |
| |
| if (res) |
| goto fail; |
| |
| drm_crtc_helper_add(&acrtc->base, &amdgpu_dm_crtc_helper_funcs); |
| |
| /* Create (reset) the plane state */ |
| if (acrtc->base.funcs->reset) |
| acrtc->base.funcs->reset(&acrtc->base); |
| |
| acrtc->max_cursor_width = dm->adev->dm.dc->caps.max_cursor_size; |
| acrtc->max_cursor_height = dm->adev->dm.dc->caps.max_cursor_size; |
| |
| acrtc->crtc_id = crtc_index; |
| acrtc->base.enabled = false; |
| acrtc->otg_inst = -1; |
| |
| dm->adev->mode_info.crtcs[crtc_index] = acrtc; |
| drm_crtc_enable_color_mgmt(&acrtc->base, MAX_COLOR_LUT_ENTRIES, |
| true, MAX_COLOR_LUT_ENTRIES); |
| drm_mode_crtc_set_gamma_size(&acrtc->base, MAX_COLOR_LEGACY_LUT_ENTRIES); |
| |
| return 0; |
| |
| fail: |
| kfree(acrtc); |
| kfree(cursor_plane); |
| return res; |
| } |
| |
| |
| static int to_drm_connector_type(enum signal_type st) |
| { |
| switch (st) { |
| case SIGNAL_TYPE_HDMI_TYPE_A: |
| return DRM_MODE_CONNECTOR_HDMIA; |
| case SIGNAL_TYPE_EDP: |
| return DRM_MODE_CONNECTOR_eDP; |
| case SIGNAL_TYPE_LVDS: |
| return DRM_MODE_CONNECTOR_LVDS; |
| case SIGNAL_TYPE_RGB: |
| return DRM_MODE_CONNECTOR_VGA; |
| case SIGNAL_TYPE_DISPLAY_PORT: |
| case SIGNAL_TYPE_DISPLAY_PORT_MST: |
| return DRM_MODE_CONNECTOR_DisplayPort; |
| case SIGNAL_TYPE_DVI_DUAL_LINK: |
| case SIGNAL_TYPE_DVI_SINGLE_LINK: |
| return DRM_MODE_CONNECTOR_DVID; |
| case SIGNAL_TYPE_VIRTUAL: |
| return DRM_MODE_CONNECTOR_VIRTUAL; |
| |
| default: |
| return DRM_MODE_CONNECTOR_Unknown; |
| } |
| } |
| |
| static struct drm_encoder *amdgpu_dm_connector_to_encoder(struct drm_connector *connector) |
| { |
| return drm_encoder_find(connector->dev, NULL, connector->encoder_ids[0]); |
| } |
| |
| static void amdgpu_dm_get_native_mode(struct drm_connector *connector) |
| { |
| struct drm_encoder *encoder; |
| struct amdgpu_encoder *amdgpu_encoder; |
| |
| encoder = amdgpu_dm_connector_to_encoder(connector); |
| |
| if (encoder == NULL) |
| return; |
| |
| amdgpu_encoder = to_amdgpu_encoder(encoder); |
| |
| amdgpu_encoder->native_mode.clock = 0; |
| |
| if (!list_empty(&connector->probed_modes)) { |
| struct drm_display_mode *preferred_mode = NULL; |
| |
| list_for_each_entry(preferred_mode, |
| &connector->probed_modes, |
| head) { |
| if (preferred_mode->type & DRM_MODE_TYPE_PREFERRED) |
| amdgpu_encoder->native_mode = *preferred_mode; |
| |
| break; |
| } |
| |
| } |
| } |
| |
| static struct drm_display_mode * |
| amdgpu_dm_create_common_mode(struct drm_encoder *encoder, |
| char *name, |
| int hdisplay, int vdisplay) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct amdgpu_encoder *amdgpu_encoder = to_amdgpu_encoder(encoder); |
| struct drm_display_mode *mode = NULL; |
| struct drm_display_mode *native_mode = &amdgpu_encoder->native_mode; |
| |
| mode = drm_mode_duplicate(dev, native_mode); |
| |
| if (mode == NULL) |
| return NULL; |
| |
| mode->hdisplay = hdisplay; |
| mode->vdisplay = vdisplay; |
| mode->type &= ~DRM_MODE_TYPE_PREFERRED; |
| strscpy(mode->name, name, DRM_DISPLAY_MODE_LEN); |
| |
| return mode; |
| |
| } |
| |
| static void amdgpu_dm_connector_add_common_modes(struct drm_encoder *encoder, |
| struct drm_connector *connector) |
| { |
| struct amdgpu_encoder *amdgpu_encoder = to_amdgpu_encoder(encoder); |
| struct drm_display_mode *mode = NULL; |
| struct drm_display_mode *native_mode = &amdgpu_encoder->native_mode; |
| struct amdgpu_dm_connector *amdgpu_dm_connector = |
| to_amdgpu_dm_connector(connector); |
| int i; |
| int n; |
| struct mode_size { |
| char name[DRM_DISPLAY_MODE_LEN]; |
| int w; |
| int h; |
| } common_modes[] = { |
| { "640x480", 640, 480}, |
| { "800x600", 800, 600}, |
| { "1024x768", 1024, 768}, |
| { "1280x720", 1280, 720}, |
| { "1280x800", 1280, 800}, |
| {"1280x1024", 1280, 1024}, |
| { "1440x900", 1440, 900}, |
| {"1680x1050", 1680, 1050}, |
| {"1600x1200", 1600, 1200}, |
| {"1920x1080", 1920, 1080}, |
| {"1920x1200", 1920, 1200} |
| }; |
| |
| n = ARRAY_SIZE(common_modes); |
| |
| for (i = 0; i < n; i++) { |
| struct drm_display_mode *curmode = NULL; |
| bool mode_existed = false; |
| |
| if (common_modes[i].w > native_mode->hdisplay || |
| common_modes[i].h > native_mode->vdisplay || |
| (common_modes[i].w == native_mode->hdisplay && |
| common_modes[i].h == native_mode->vdisplay)) |
| continue; |
| |
| list_for_each_entry(curmode, &connector->probed_modes, head) { |
| if (common_modes[i].w == curmode->hdisplay && |
| common_modes[i].h == curmode->vdisplay) { |
| mode_existed = true; |
| break; |
| } |
| } |
| |
| if (mode_existed) |
| continue; |
| |
| mode = amdgpu_dm_create_common_mode(encoder, |
| common_modes[i].name, common_modes[i].w, |
| common_modes[i].h); |
| drm_mode_probed_add(connector, mode); |
| amdgpu_dm_connector->num_modes++; |
| } |
| } |
| |
| static void amdgpu_dm_connector_ddc_get_modes(struct drm_connector *connector, |
| struct edid *edid) |
| { |
| struct amdgpu_dm_connector *amdgpu_dm_connector = |
| to_amdgpu_dm_connector(connector); |
| |
| if (edid) { |
| /* empty probed_modes */ |
| INIT_LIST_HEAD(&connector->probed_modes); |
| amdgpu_dm_connector->num_modes = |
| drm_add_edid_modes(connector, edid); |
| |
| amdgpu_dm_get_native_mode(connector); |
| } else { |
| amdgpu_dm_connector->num_modes = 0; |
| } |
| } |
| |
| static int amdgpu_dm_connector_get_modes(struct drm_connector *connector) |
| { |
| struct amdgpu_dm_connector *amdgpu_dm_connector = |
| to_amdgpu_dm_connector(connector); |
| struct drm_encoder *encoder; |
| struct edid *edid = amdgpu_dm_connector->edid; |
| |
| encoder = amdgpu_dm_connector_to_encoder(connector); |
| |
| if (!edid || !drm_edid_is_valid(edid)) { |
| amdgpu_dm_connector->num_modes = |
| drm_add_modes_noedid(connector, 640, 480); |
| } else { |
| amdgpu_dm_connector_ddc_get_modes(connector, edid); |
| amdgpu_dm_connector_add_common_modes(encoder, connector); |
| } |
| amdgpu_dm_fbc_init(connector); |
| |
| return amdgpu_dm_connector->num_modes; |
| } |
| |
| void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm, |
| struct amdgpu_dm_connector *aconnector, |
| int connector_type, |
| struct dc_link *link, |
| int link_index) |
| { |
| struct amdgpu_device *adev = dm->ddev->dev_private; |
| |
| aconnector->connector_id = link_index; |
| aconnector->dc_link = link; |
| aconnector->base.interlace_allowed = false; |
| aconnector->base.doublescan_allowed = false; |
| aconnector->base.stereo_allowed = false; |
| aconnector->base.dpms = DRM_MODE_DPMS_OFF; |
| aconnector->hpd.hpd = AMDGPU_HPD_NONE; /* not used */ |
| mutex_init(&aconnector->hpd_lock); |
| |
| /* |
| * configure support HPD hot plug connector_>polled default value is 0 |
| * which means HPD hot plug not supported |
| */ |
| switch (connector_type) { |
| case DRM_MODE_CONNECTOR_HDMIA: |
| aconnector->base.polled = DRM_CONNECTOR_POLL_HPD; |
| aconnector->base.ycbcr_420_allowed = |
| link->link_enc->features.hdmi_ycbcr420_supported ? true : false; |
| break; |
| case DRM_MODE_CONNECTOR_DisplayPort: |
| aconnector->base.polled = DRM_CONNECTOR_POLL_HPD; |
| aconnector->base.ycbcr_420_allowed = |
| link->link_enc->features.dp_ycbcr420_supported ? true : false; |
| break; |
| case DRM_MODE_CONNECTOR_DVID: |
| aconnector->base.polled = DRM_CONNECTOR_POLL_HPD; |
| break; |
| default: |
| break; |
| } |
| |
| drm_object_attach_property(&aconnector->base.base, |
| dm->ddev->mode_config.scaling_mode_property, |
| DRM_MODE_SCALE_NONE); |
| |
| drm_object_attach_property(&aconnector->base.base, |
| adev->mode_info.underscan_property, |
| UNDERSCAN_OFF); |
| drm_object_attach_property(&aconnector->base.base, |
| adev->mode_info.underscan_hborder_property, |
| 0); |
| drm_object_attach_property(&aconnector->base.base, |
| adev->mode_info.underscan_vborder_property, |
| 0); |
| drm_object_attach_property(&aconnector->base.base, |
| adev->mode_info.max_bpc_property, |
| 0); |
| |
| if (connector_type == DRM_MODE_CONNECTOR_eDP && |
| dc_is_dmcu_initialized(adev->dm.dc)) { |
| drm_object_attach_property(&aconnector->base.base, |
| adev->mode_info.abm_level_property, 0); |
| } |
| |
| if (connector_type == DRM_MODE_CONNECTOR_HDMIA || |
| connector_type == DRM_MODE_CONNECTOR_DisplayPort) { |
| drm_connector_attach_vrr_capable_property( |
| &aconnector->base); |
| } |
| } |
| |
| static int amdgpu_dm_i2c_xfer(struct i2c_adapter *i2c_adap, |
| struct i2c_msg *msgs, int num) |
| { |
| struct amdgpu_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap); |
| struct ddc_service *ddc_service = i2c->ddc_service; |
| struct i2c_command cmd; |
| int i; |
| int result = -EIO; |
| |
| cmd.payloads = kcalloc(num, sizeof(struct i2c_payload), GFP_KERNEL); |
| |
| if (!cmd.payloads) |
| return result; |
| |
| cmd.number_of_payloads = num; |
| cmd.engine = I2C_COMMAND_ENGINE_DEFAULT; |
| cmd.speed = 100; |
| |
| for (i = 0; i < num; i++) { |
| cmd.payloads[i].write = !(msgs[i].flags & I2C_M_RD); |
| cmd.payloads[i].address = msgs[i].addr; |
| cmd.payloads[i].length = msgs[i].len; |
| cmd.payloads[i].data = msgs[i].buf; |
| } |
| |
| if (dc_submit_i2c( |
| ddc_service->ctx->dc, |
| ddc_service->ddc_pin->hw_info.ddc_channel, |
| &cmd)) |
| result = num; |
| |
| kfree(cmd.payloads); |
| return result; |
| } |
| |
| static u32 amdgpu_dm_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static const struct i2c_algorithm amdgpu_dm_i2c_algo = { |
| .master_xfer = amdgpu_dm_i2c_xfer, |
| .functionality = amdgpu_dm_i2c_func, |
| }; |
| |
| static struct amdgpu_i2c_adapter * |
| create_i2c(struct ddc_service *ddc_service, |
| int link_index, |
| int *res) |
| { |
| struct amdgpu_device *adev = ddc_service->ctx->driver_context; |
| struct amdgpu_i2c_adapter *i2c; |
| |
| i2c = kzalloc(sizeof(struct amdgpu_i2c_adapter), GFP_KERNEL); |
| if (!i2c) |
| return NULL; |
| i2c->base.owner = THIS_MODULE; |
| i2c->base.class = I2C_CLASS_DDC; |
| i2c->base.dev.parent = &adev->pdev->dev; |
| i2c->base.algo = &amdgpu_dm_i2c_algo; |
| snprintf(i2c->base.name, sizeof(i2c->base.name), "AMDGPU DM i2c hw bus %d", link_index); |
| i2c_set_adapdata(&i2c->base, i2c); |
| i2c->ddc_service = ddc_service; |
| i2c->ddc_service->ddc_pin->hw_info.ddc_channel = link_index; |
| |
| return i2c; |
| } |
| |
| |
| /* |
| * Note: this function assumes that dc_link_detect() was called for the |
| * dc_link which will be represented by this aconnector. |
| */ |
| static int amdgpu_dm_connector_init(struct amdgpu_display_manager *dm, |
| struct amdgpu_dm_connector *aconnector, |
| uint32_t link_index, |
| struct amdgpu_encoder *aencoder) |
| { |
| int res = 0; |
| int connector_type; |
| struct dc *dc = dm->dc; |
| struct dc_link *link = dc_get_link_at_index(dc, link_index); |
| struct amdgpu_i2c_adapter *i2c; |
| |
| link->priv = aconnector; |
| |
| DRM_DEBUG_DRIVER("%s()\n", __func__); |
| |
| i2c = create_i2c(link->ddc, link->link_index, &res); |
| if (!i2c) { |
| DRM_ERROR("Failed to create i2c adapter data\n"); |
| return -ENOMEM; |
| } |
| |
| aconnector->i2c = i2c; |
| res = i2c_add_adapter(&i2c->base); |
| |
| if (res) { |
| DRM_ERROR("Failed to register hw i2c %d\n", link->link_index); |
| goto out_free; |
| } |
| |
| connector_type = to_drm_connector_type(link->connector_signal); |
| |
| res = drm_connector_init( |
| dm->ddev, |
| &aconnector->base, |
| &amdgpu_dm_connector_funcs, |
| connector_type); |
| |
| if (res) { |
| DRM_ERROR("connector_init failed\n"); |
| aconnector->connector_id = -1; |
| goto out_free; |
| } |
| |
| drm_connector_helper_add( |
| &aconnector->base, |
| &amdgpu_dm_connector_helper_funcs); |
| |
| if (aconnector->base.funcs->reset) |
| aconnector->base.funcs->reset(&aconnector->base); |
| |
| amdgpu_dm_connector_init_helper( |
| dm, |
| aconnector, |
| connector_type, |
| link, |
| link_index); |
| |
| drm_connector_attach_encoder( |
| &aconnector->base, &aencoder->base); |
| |
| drm_connector_register(&aconnector->base); |
| #if defined(CONFIG_DEBUG_FS) |
| res = connector_debugfs_init(aconnector); |
| if (res) { |
| DRM_ERROR("Failed to create debugfs for connector"); |
| goto out_free; |
| } |
| #endif |
| |
| if (connector_type == DRM_MODE_CONNECTOR_DisplayPort |
| || connector_type == DRM_MODE_CONNECTOR_eDP) |
| amdgpu_dm_initialize_dp_connector(dm, aconnector); |
| |
| out_free: |
| if (res) { |
| kfree(i2c); |
| aconnector->i2c = NULL; |
| } |
| return res; |
| } |
| |
| int amdgpu_dm_get_encoder_crtc_mask(struct amdgpu_device *adev) |
| { |
| switch (adev->mode_info.num_crtc) { |
| case 1: |
| return 0x1; |
| case 2: |
| return 0x3; |
| case 3: |
| return 0x7; |
| case 4: |
| return 0xf; |
| case 5: |
| return 0x1f; |
| case 6: |
| default: |
| return 0x3f; |
| } |
| } |
| |
| static int amdgpu_dm_encoder_init(struct drm_device *dev, |
| struct amdgpu_encoder *aencoder, |
| uint32_t link_index) |
| { |
| struct amdgpu_device *adev = dev->dev_private; |
| |
| int res = drm_encoder_init(dev, |
| &aencoder->base, |
| &amdgpu_dm_encoder_funcs, |
| DRM_MODE_ENCODER_TMDS, |
| NULL); |
| |
| aencoder->base.possible_crtcs = amdgpu_dm_get_encoder_crtc_mask(adev); |
| |
| if (!res) |
| aencoder->encoder_id = link_index; |
| else |
| aencoder->encoder_id = -1; |
| |
| drm_encoder_helper_add(&aencoder->base, &amdgpu_dm_encoder_helper_funcs); |
| |
| return res; |
| } |
| |
| static void manage_dm_interrupts(struct amdgpu_device *adev, |
| struct amdgpu_crtc *acrtc, |
| bool enable) |
| { |
| /* |
| * this is not correct translation but will work as soon as VBLANK |
| * constant is the same as PFLIP |
| */ |
| int irq_type = |
| amdgpu_display_crtc_idx_to_irq_type( |
| adev, |
| acrtc->crtc_id); |
| |
| if (enable) { |
| drm_crtc_vblank_on(&acrtc->base); |
| amdgpu_irq_get( |
| adev, |
| &adev->pageflip_irq, |
| irq_type); |
| } else { |
| |
| amdgpu_irq_put( |
| adev, |
| &adev->pageflip_irq, |
| irq_type); |
| drm_crtc_vblank_off(&acrtc->base); |
| } |
| } |
| |
| static bool |
| is_scaling_state_different(const struct dm_connector_state *dm_state, |
| const struct dm_connector_state *old_dm_state) |
| { |
| if (dm_state->scaling != old_dm_state->scaling) |
| return true; |
| if (!dm_state->underscan_enable && old_dm_state->underscan_enable) { |
| if (old_dm_state->underscan_hborder != 0 && old_dm_state->underscan_vborder != 0) |
| return true; |
| } else if (dm_state->underscan_enable && !old_dm_state->underscan_enable) { |
| if (dm_state->underscan_hborder != 0 && dm_state->underscan_vborder != 0) |
| return true; |
| } else if (dm_state->underscan_hborder != old_dm_state->underscan_hborder || |
| dm_state->underscan_vborder != old_dm_state->underscan_vborder) |
| return true; |
| return false; |
| } |
| |
| static void remove_stream(struct amdgpu_device *adev, |
| struct amdgpu_crtc *acrtc, |
| struct dc_stream_state *stream) |
| { |
| /* this is the update mode case */ |
| |
| acrtc->otg_inst = -1; |
| acrtc->enabled = false; |
| } |
| |
| static int get_cursor_position(struct drm_plane *plane, struct drm_crtc *crtc, |
| struct dc_cursor_position *position) |
| { |
| struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); |
| int x, y; |
| int xorigin = 0, yorigin = 0; |
| |
| if (!crtc || !plane->state->fb) { |
| position->enable = false; |
| position->x = 0; |
| position->y = 0; |
| return 0; |
| } |
| |
| if ((plane->state->crtc_w > amdgpu_crtc->max_cursor_width) || |
| (plane->state->crtc_h > amdgpu_crtc->max_cursor_height)) { |
| DRM_ERROR("%s: bad cursor width or height %d x %d\n", |
| __func__, |
| plane->state->crtc_w, |
| plane->state->crtc_h); |
| return -EINVAL; |
| } |
| |
| x = plane->state->crtc_x; |
| y = plane->state->crtc_y; |
| /* avivo cursor are offset into the total surface */ |
| x += crtc->primary->state->src_x >> 16; |
| y += crtc->primary->state->src_y >> 16; |
| if (x < 0) { |
| xorigin = min(-x, amdgpu_crtc->max_cursor_width - 1); |
| x = 0; |
| } |
| if (y < 0) { |
| yorigin = min(-y, amdgpu_crtc->max_cursor_height - 1); |
| y = 0; |
| } |
| position->enable = true; |
| position->x = x; |
| position->y = y; |
| position->x_hotspot = xorigin; |
| position->y_hotspot = yorigin; |
| |
| return 0; |
| } |
| |
| static void handle_cursor_update(struct drm_plane *plane, |
| struct drm_plane_state *old_plane_state) |
| { |
| struct amdgpu_device *adev = plane->dev->dev_private; |
| struct amdgpu_framebuffer *afb = to_amdgpu_framebuffer(plane->state->fb); |
| struct drm_crtc *crtc = afb ? plane->state->crtc : old_plane_state->crtc; |
| struct dm_crtc_state *crtc_state = crtc ? to_dm_crtc_state(crtc->state) : NULL; |
| struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); |
| uint64_t address = afb ? afb->address : 0; |
| struct dc_cursor_position position; |
| struct dc_cursor_attributes attributes; |
| int ret; |
| |
| if (!plane->state->fb && !old_plane_state->fb) |
| return; |
| |
| DRM_DEBUG_DRIVER("%s: crtc_id=%d with size %d to %d\n", |
| __func__, |
| amdgpu_crtc->crtc_id, |
| plane->state->crtc_w, |
| plane->state->crtc_h); |
| |
| ret = get_cursor_position(plane, crtc, &position); |
| if (ret) |
| return; |
| |
| if (!position.enable) { |
| /* turn off cursor */ |
| if (crtc_state && crtc_state->stream) { |
| mutex_lock(&adev->dm.dc_lock); |
| dc_stream_set_cursor_position(crtc_state->stream, |
| &position); |
| mutex_unlock(&adev->dm.dc_lock); |
| } |
| return; |
| } |
| |
| amdgpu_crtc->cursor_width = plane->state->crtc_w; |
| amdgpu_crtc->cursor_height = plane->state->crtc_h; |
| |
| attributes.address.high_part = upper_32_bits(address); |
| attributes.address.low_part = lower_32_bits(address); |
| attributes.width = plane->state->crtc_w; |
| attributes.height = plane->state->crtc_h; |
| attributes.color_format = CURSOR_MODE_COLOR_PRE_MULTIPLIED_ALPHA; |
| attributes.rotation_angle = 0; |
| attributes.attribute_flags.value = 0; |
| |
| attributes.pitch = attributes.width; |
| |
| if (crtc_state->stream) { |
| mutex_lock(&adev->dm.dc_lock); |
| if (!dc_stream_set_cursor_attributes(crtc_state->stream, |
| &attributes)) |
| DRM_ERROR("DC failed to set cursor attributes\n"); |
| |
| if (!dc_stream_set_cursor_position(crtc_state->stream, |
| &position)) |
| DRM_ERROR("DC failed to set cursor position\n"); |
| mutex_unlock(&adev->dm.dc_lock); |
| } |
| } |
| |
| static void prepare_flip_isr(struct amdgpu_crtc *acrtc) |
| { |
| |
| assert_spin_locked(&acrtc->base.dev->event_lock); |
| WARN_ON(acrtc->event); |
| |
| acrtc->event = acrtc->base.state->event; |
| |
| /* Set the flip status */ |
| acrtc->pflip_status = AMDGPU_FLIP_SUBMITTED; |
| |
| /* Mark this event as consumed */ |
| acrtc->base.state->event = NULL; |
| |
| DRM_DEBUG_DRIVER("crtc:%d, pflip_stat:AMDGPU_FLIP_SUBMITTED\n", |
| acrtc->crtc_id); |
| } |
| |
| struct dc_stream_status *dc_state_get_stream_status( |
| struct dc_state *state, |
| struct dc_stream_state *stream) |
| { |
| uint8_t i; |
| |
| for (i = 0; i < state->stream_count; i++) { |
| if (stream == state->streams[i]) |
| return &state->stream_status[i]; |
| } |
| |
| return NULL; |
| } |
| |
| static void update_freesync_state_on_stream( |
| struct amdgpu_display_manager *dm, |
| struct dm_crtc_state *new_crtc_state, |
| struct dc_stream_state *new_stream, |
| struct dc_plane_state *surface, |
| u32 flip_timestamp_in_us) |
| { |
| struct mod_vrr_params vrr_params = new_crtc_state->vrr_params; |
| struct dc_info_packet vrr_infopacket = {0}; |
| struct mod_freesync_config config = new_crtc_state->freesync_config; |
| |
| if (!new_stream) |
| return; |
| |
| /* |
| * TODO: Determine why min/max totals and vrefresh can be 0 here. |
| * For now it's sufficient to just guard against these conditions. |
| */ |
| |
| if (!new_stream->timing.h_total || !new_stream->timing.v_total) |
| return; |
| |
| if (new_crtc_state->vrr_supported && |
| config.min_refresh_in_uhz && |
| config.max_refresh_in_uhz) { |
| config.state = new_crtc_state->base.vrr_enabled ? |
| VRR_STATE_ACTIVE_VARIABLE : |
| VRR_STATE_INACTIVE; |
| } else { |
| config.state = VRR_STATE_UNSUPPORTED; |
| } |
| |
| mod_freesync_build_vrr_params(dm->freesync_module, |
| new_stream, |
| &config, &vrr_params); |
| |
| if (surface) { |
| mod_freesync_handle_preflip( |
| dm->freesync_module, |
| surface, |
| new_stream, |
| flip_timestamp_in_us, |
| &vrr_params); |
| } |
| |
| mod_freesync_build_vrr_infopacket( |
| dm->freesync_module, |
| new_stream, |
| &vrr_params, |
| PACKET_TYPE_VRR, |
| TRANSFER_FUNC_UNKNOWN, |
| &vrr_infopacket); |
| |
| new_crtc_state->freesync_timing_changed = |
| (memcmp(&new_crtc_state->vrr_params.adjust, |
| &vrr_params.adjust, |
| sizeof(vrr_params.adjust)) != 0); |
| |
| new_crtc_state->freesync_vrr_info_changed = |
| (memcmp(&new_crtc_state->vrr_infopacket, |
| &vrr_infopacket, |
| sizeof(vrr_infopacket)) != 0); |
| |
| new_crtc_state->vrr_params = vrr_params; |
| new_crtc_state->vrr_infopacket = vrr_infopacket; |
| |
| new_stream->adjust = new_crtc_state->vrr_params.adjust; |
| new_stream->vrr_infopacket = vrr_infopacket; |
| |
| if (new_crtc_state->freesync_vrr_info_changed) |
| DRM_DEBUG_KMS("VRR packet update: crtc=%u enabled=%d state=%d", |
| new_crtc_state->base.crtc->base.id, |
| (int)new_crtc_state->base.vrr_enabled, |
| (int)vrr_params.state); |
| |
| if (new_crtc_state->freesync_timing_changed) |
| DRM_DEBUG_KMS("VRR timing update: crtc=%u min=%u max=%u\n", |
| new_crtc_state->base.crtc->base.id, |
| vrr_params.adjust.v_total_min, |
| vrr_params.adjust.v_total_max); |
| } |
| |
| /* |
| * Executes flip |
| * |
| * Waits on all BO's fences and for proper vblank count |
| */ |
| static void amdgpu_dm_do_flip(struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, |
| uint32_t target, |
| struct dc_state *state) |
| { |
| unsigned long flags; |
| uint64_t timestamp_ns; |
| uint32_t target_vblank; |
| int r, vpos, hpos; |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); |
| struct amdgpu_framebuffer *afb = to_amdgpu_framebuffer(fb); |
| struct amdgpu_bo *abo = gem_to_amdgpu_bo(fb->obj[0]); |
| struct amdgpu_device *adev = crtc->dev->dev_private; |
| bool async_flip = (crtc->state->pageflip_flags & DRM_MODE_PAGE_FLIP_ASYNC) != 0; |
| struct dc_flip_addrs addr = { {0} }; |
| /* TODO eliminate or rename surface_update */ |
| struct dc_surface_update surface_updates[1] = { {0} }; |
| struct dc_stream_update stream_update = {0}; |
| struct dm_crtc_state *acrtc_state = to_dm_crtc_state(crtc->state); |
| struct dc_stream_status *stream_status; |
| struct dc_plane_state *surface; |
| |
| |
| /* Prepare wait for target vblank early - before the fence-waits */ |
| target_vblank = target - (uint32_t)drm_crtc_vblank_count(crtc) + |
| amdgpu_get_vblank_counter_kms(crtc->dev, acrtc->crtc_id); |
| |
| /* |
| * TODO This might fail and hence better not used, wait |
| * explicitly on fences instead |
| * and in general should be called for |
| * blocking commit to as per framework helpers |
| */ |
| r = amdgpu_bo_reserve(abo, true); |
| if (unlikely(r != 0)) { |
| DRM_ERROR("failed to reserve buffer before flip\n"); |
| WARN_ON(1); |
| } |
| |
| /* Wait for all fences on this FB */ |
| WARN_ON(reservation_object_wait_timeout_rcu(abo->tbo.resv, true, false, |
| MAX_SCHEDULE_TIMEOUT) < 0); |
| |
| amdgpu_bo_unreserve(abo); |
| |
| /* |
| * Wait until we're out of the vertical blank period before the one |
| * targeted by the flip |
| */ |
| while ((acrtc->enabled && |
| (amdgpu_display_get_crtc_scanoutpos(adev->ddev, acrtc->crtc_id, |
| 0, &vpos, &hpos, NULL, |
| NULL, &crtc->hwmode) |
| & (DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_IN_VBLANK)) == |
| (DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_IN_VBLANK) && |
| (int)(target_vblank - |
| amdgpu_get_vblank_counter_kms(adev->ddev, acrtc->crtc_id)) > 0)) { |
| usleep_range(1000, 1100); |
| } |
| |
| /* Flip */ |
| spin_lock_irqsave(&crtc->dev->event_lock, flags); |
| |
| WARN_ON(acrtc->pflip_status != AMDGPU_FLIP_NONE); |
| WARN_ON(!acrtc_state->stream); |
| |
| addr.address.grph.addr.low_part = lower_32_bits(afb->address); |
| addr.address.grph.addr.high_part = upper_32_bits(afb->address); |
| addr.flip_immediate = async_flip; |
| |
| timestamp_ns = ktime_get_ns(); |
| addr.flip_timestamp_in_us = div_u64(timestamp_ns, 1000); |
| |
| |
| if (acrtc->base.state->event) |
| prepare_flip_isr(acrtc); |
| |
| spin_unlock_irqrestore(&crtc->dev->event_lock, flags); |
| |
| stream_status = dc_stream_get_status(acrtc_state->stream); |
| if (!stream_status) { |
| DRM_ERROR("No stream status for CRTC: id=%d\n", |
| acrtc->crtc_id); |
| return; |
| } |
| |
| surface = stream_status->plane_states[0]; |
| surface_updates->surface = surface; |
| |
| if (!surface) { |
| DRM_ERROR("No surface for CRTC: id=%d\n", |
| acrtc->crtc_id); |
| return; |
| } |
| surface_updates->flip_addr = &addr; |
| |
| if (acrtc_state->stream) { |
| update_freesync_state_on_stream( |
| &adev->dm, |
| acrtc_state, |
| acrtc_state->stream, |
| surface, |
| addr.flip_timestamp_in_us); |
| |
| if (acrtc_state->freesync_timing_changed) |
| stream_update.adjust = |
| &acrtc_state->stream->adjust; |
| |
| if (acrtc_state->freesync_vrr_info_changed) |
| stream_update.vrr_infopacket = |
| &acrtc_state->stream->vrr_infopacket; |
| } |
| |
| /* Update surface timing information. */ |
| surface->time.time_elapsed_in_us[surface->time.index] = |
| addr.flip_timestamp_in_us - surface->time.prev_update_time_in_us; |
| surface->time.prev_update_time_in_us = addr.flip_timestamp_in_us; |
| surface->time.index++; |
| if (surface->time.index >= DC_PLANE_UPDATE_TIMES_MAX) |
| surface->time.index = 0; |
| |
| mutex_lock(&adev->dm.dc_lock); |
| |
| dc_commit_updates_for_stream(adev->dm.dc, |
| surface_updates, |
| 1, |
| acrtc_state->stream, |
| &stream_update, |
| &surface_updates->surface, |
| state); |
| mutex_unlock(&adev->dm.dc_lock); |
| |
| DRM_DEBUG_DRIVER("%s Flipping to hi: 0x%x, low: 0x%x \n", |
| __func__, |
| addr.address.grph.addr.high_part, |
| addr.address.grph.addr.low_part); |
| } |
| |
| /* |
| * TODO this whole function needs to go |
| * |
| * dc_surface_update is needlessly complex. See if we can just replace this |
| * with a dc_plane_state and follow the atomic model a bit more closely here. |
| */ |
| static bool commit_planes_to_stream( |
| struct amdgpu_display_manager *dm, |
| struct dc *dc, |
| struct dc_plane_state **plane_states, |
| uint8_t new_plane_count, |
| struct dm_crtc_state *dm_new_crtc_state, |
| struct dm_crtc_state *dm_old_crtc_state, |
| struct dc_state *state) |
| { |
| /* no need to dynamically allocate this. it's pretty small */ |
| struct dc_surface_update updates[MAX_SURFACES]; |
| struct dc_flip_addrs *flip_addr; |
| struct dc_plane_info *plane_info; |
| struct dc_scaling_info *scaling_info; |
| int i; |
| struct dc_stream_state *dc_stream = dm_new_crtc_state->stream; |
| struct dc_stream_update *stream_update = |
| kzalloc(sizeof(struct dc_stream_update), GFP_KERNEL); |
| unsigned int abm_level; |
| |
| if (!stream_update) { |
| BREAK_TO_DEBUGGER(); |
| return false; |
| } |
| |
| flip_addr = kcalloc(MAX_SURFACES, sizeof(struct dc_flip_addrs), |
| GFP_KERNEL); |
| plane_info = kcalloc(MAX_SURFACES, sizeof(struct dc_plane_info), |
| GFP_KERNEL); |
| scaling_info = kcalloc(MAX_SURFACES, sizeof(struct dc_scaling_info), |
| GFP_KERNEL); |
| |
| if (!flip_addr || !plane_info || !scaling_info) { |
| kfree(flip_addr); |
| kfree(plane_info); |
| kfree(scaling_info); |
| kfree(stream_update); |
| return false; |
| } |
| |
| memset(updates, 0, sizeof(updates)); |
| |
| stream_update->src = dc_stream->src; |
| stream_update->dst = dc_stream->dst; |
| stream_update->out_transfer_func = dc_stream->out_transfer_func; |
| |
| if (dm_new_crtc_state->abm_level != dm_old_crtc_state->abm_level) { |
| abm_level = dm_new_crtc_state->abm_level; |
| stream_update->abm_level = &abm_level; |
| } |
| |
| for (i = 0; i < new_plane_count; i++) { |
| updates[i].surface = plane_states[i]; |
| updates[i].gamma = |
| (struct dc_gamma *)plane_states[i]->gamma_correction; |
| updates[i].in_transfer_func = plane_states[i]->in_transfer_func; |
| flip_addr[i].address = plane_states[i]->address; |
| flip_addr[i].flip_immediate = plane_states[i]->flip_immediate; |
| plane_info[i].color_space = plane_states[i]->color_space; |
| plane_info[i].format = plane_states[i]->format; |
| plane_info[i].plane_size = plane_states[i]->plane_size; |
| plane_info[i].rotation = plane_states[i]->rotation; |
| plane_info[i].horizontal_mirror = plane_states[i]->horizontal_mirror; |
| plane_info[i].stereo_format = plane_states[i]->stereo_format; |
| plane_info[i].tiling_info = plane_states[i]->tiling_info; |
| plane_info[i].visible = plane_states[i]->visible; |
| plane_info[i].per_pixel_alpha = plane_states[i]->per_pixel_alpha; |
| plane_info[i].dcc = plane_states[i]->dcc; |
| scaling_info[i].scaling_quality = plane_states[i]->scaling_quality; |
| scaling_info[i].src_rect = plane_states[i]->src_rect; |
| scaling_info[i].dst_rect = plane_states[i]->dst_rect; |
| scaling_info[i].clip_rect = plane_states[i]->clip_rect; |
| |
| updates[i].flip_addr = &flip_addr[i]; |
| updates[i].plane_info = &plane_info[i]; |
| updates[i].scaling_info = &scaling_info[i]; |
| } |
| |
| mutex_lock(&dm->dc_lock); |
| dc_commit_updates_for_stream( |
| dc, |
| updates, |
| new_plane_count, |
| dc_stream, stream_update, plane_states, state); |
| mutex_unlock(&dm->dc_lock); |
| |
| kfree(flip_addr); |
| kfree(plane_info); |
| kfree(scaling_info); |
| kfree(stream_update); |
| return true; |
| } |
| |
| static void amdgpu_dm_commit_planes(struct drm_atomic_state *state, |
| struct dc_state *dc_state, |
| struct drm_device *dev, |
| struct amdgpu_display_manager *dm, |
| struct drm_crtc *pcrtc, |
| bool *wait_for_vblank) |
| { |
| uint32_t i; |
| struct drm_plane *plane; |
| struct drm_plane_state *old_plane_state, *new_plane_state; |
| struct dc_stream_state *dc_stream_attach; |
| struct dc_plane_state *plane_states_constructed[MAX_SURFACES]; |
| struct amdgpu_crtc *acrtc_attach = to_amdgpu_crtc(pcrtc); |
| struct drm_crtc_state *new_pcrtc_state = |
| drm_atomic_get_new_crtc_state(state, pcrtc); |
| struct dm_crtc_state *acrtc_state = to_dm_crtc_state(new_pcrtc_state); |
| struct dm_crtc_state *dm_old_crtc_state = |
| to_dm_crtc_state(drm_atomic_get_old_crtc_state(state, pcrtc)); |
| int planes_count = 0; |
| unsigned long flags; |
| |
| /* update planes when needed */ |
| for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) { |
| struct drm_crtc *crtc = new_plane_state->crtc; |
| struct drm_crtc_state *new_crtc_state; |
| struct drm_framebuffer *fb = new_plane_state->fb; |
| bool pflip_needed; |
| struct dm_plane_state *dm_new_plane_state = to_dm_plane_state(new_plane_state); |
| |
| if (plane->type == DRM_PLANE_TYPE_CURSOR) { |
| handle_cursor_update(plane, old_plane_state); |
| continue; |
| } |
| |
| if (!fb || !crtc || pcrtc != crtc) |
| continue; |
| |
| new_crtc_state = drm_atomic_get_new_crtc_state(state, crtc); |
| if (!new_crtc_state->active) |
| continue; |
| |
| pflip_needed = !state->allow_modeset; |
| |
| spin_lock_irqsave(&crtc->dev->event_lock, flags); |
| if (acrtc_attach->pflip_status != AMDGPU_FLIP_NONE) { |
| DRM_ERROR("%s: acrtc %d, already busy\n", |
| __func__, |
| acrtc_attach->crtc_id); |
| /* In commit tail framework this cannot happen */ |
| WARN_ON(1); |
| } |
| spin_unlock_irqrestore(&crtc->dev->event_lock, flags); |
| |
| if (!pflip_needed || plane->type == DRM_PLANE_TYPE_OVERLAY) { |
| WARN_ON(!dm_new_plane_state->dc_state); |
| |
| plane_states_constructed[planes_count] = dm_new_plane_state->dc_state; |
| |
| dc_stream_attach = acrtc_state->stream; |
| planes_count++; |
| |
| } else if (new_crtc_state->planes_changed) { |
| /* Assume even ONE crtc with immediate flip means |
| * entire can't wait for VBLANK |
| * TODO Check if it's correct |
| */ |
| *wait_for_vblank = |
| new_pcrtc_state->pageflip_flags & DRM_MODE_PAGE_FLIP_ASYNC ? |
| false : true; |
| |
| /* TODO: Needs rework for multiplane flip */ |
| if (plane->type == DRM_PLANE_TYPE_PRIMARY) |
| drm_crtc_vblank_get(crtc); |
| |
| amdgpu_dm_do_flip( |
| crtc, |
| fb, |
| (uint32_t)drm_crtc_vblank_count(crtc) + *wait_for_vblank, |
| dc_state); |
| } |
| |
| } |
| |
| if (planes_count) { |
| unsigned long flags; |
| |
| if (new_pcrtc_state->event) { |
| |
| drm_crtc_vblank_get(pcrtc); |
| |
| spin_lock_irqsave(&pcrtc->dev->event_lock, flags); |
| prepare_flip_isr(acrtc_attach); |
| spin_unlock_irqrestore(&pcrtc->dev->event_lock, flags); |
| } |
| |
| dc_stream_attach->abm_level = acrtc_state->abm_level; |
| |
| if (false == commit_planes_to_stream(dm, |
| dm->dc, |
| plane_states_constructed, |
| planes_count, |
| acrtc_state, |
| dm_old_crtc_state, |
| dc_state)) |
| dm_error("%s: Failed to attach plane!\n", __func__); |
| } else { |
| /*TODO BUG Here should go disable planes on CRTC. */ |
| } |
| } |
| |
| /* |
| * amdgpu_dm_crtc_copy_transient_flags - copy mirrored flags from DRM to DC |
| * @crtc_state: the DRM CRTC state |
| * @stream_state: the DC stream state. |
| * |
| * Copy the mirrored transient state flags from DRM, to DC. It is used to bring |
| * a dc_stream_state's flags in sync with a drm_crtc_state's flags. |
| */ |
| static void amdgpu_dm_crtc_copy_transient_flags(struct drm_crtc_state *crtc_state, |
| struct dc_stream_state *stream_state) |
| { |
| stream_state->mode_changed = crtc_state->mode_changed; |
| } |
| |
| static int amdgpu_dm_atomic_commit(struct drm_device *dev, |
| struct drm_atomic_state *state, |
| bool nonblock) |
| { |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *old_crtc_state, *new_crtc_state; |
| struct amdgpu_device *adev = dev->dev_private; |
| int i; |
| |
| /* |
| * We evade vblanks and pflips on crtc that |
| * should be changed. We do it here to flush & disable |
| * interrupts before drm_swap_state is called in drm_atomic_helper_commit |
| * it will update crtc->dm_crtc_state->stream pointer which is used in |
| * the ISRs. |
| */ |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| struct dm_crtc_state *dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); |
| |
| if (drm_atomic_crtc_needs_modeset(new_crtc_state) && dm_old_crtc_state->stream) |
| manage_dm_interrupts(adev, acrtc, false); |
| } |
| /* |
| * Add check here for SoC's that support hardware cursor plane, to |
| * unset legacy_cursor_update |
| */ |
| |
| return drm_atomic_helper_commit(dev, state, nonblock); |
| |
| /*TODO Handle EINTR, reenable IRQ*/ |
| } |
| |
| /** |
| * amdgpu_dm_atomic_commit_tail() - AMDgpu DM's commit tail implementation. |
| * @state: The atomic state to commit |
| * |
| * This will tell DC to commit the constructed DC state from atomic_check, |
| * programming the hardware. Any failures here implies a hardware failure, since |
| * atomic check should have filtered anything non-kosher. |
| */ |
| static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) |
| { |
| struct drm_device *dev = state->dev; |
| struct amdgpu_device *adev = dev->dev_private; |
| struct amdgpu_display_manager *dm = &adev->dm; |
| struct dm_atomic_state *dm_state; |
| struct dc_state *dc_state = NULL, *dc_state_temp = NULL; |
| uint32_t i, j; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *old_crtc_state, *new_crtc_state; |
| unsigned long flags; |
| bool wait_for_vblank = true; |
| struct drm_connector *connector; |
| struct drm_connector_state *old_con_state, *new_con_state; |
| struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state; |
| int crtc_disable_count = 0; |
| |
| drm_atomic_helper_update_legacy_modeset_state(dev, state); |
| |
| dm_state = dm_atomic_get_new_state(state); |
| if (dm_state && dm_state->context) { |
| dc_state = dm_state->context; |
| } else { |
| /* No state changes, retain current state. */ |
| dc_state_temp = dc_create_state(); |
| ASSERT(dc_state_temp); |
| dc_state = dc_state_temp; |
| dc_resource_state_copy_construct_current(dm->dc, dc_state); |
| } |
| |
| /* update changed items */ |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); |
| |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| |
| DRM_DEBUG_DRIVER( |
| "amdgpu_crtc id:%d crtc_state_flags: enable:%d, active:%d, " |
| "planes_changed:%d, mode_changed:%d,active_changed:%d," |
| "connectors_changed:%d\n", |
| acrtc->crtc_id, |
| new_crtc_state->enable, |
| new_crtc_state->active, |
| new_crtc_state->planes_changed, |
| new_crtc_state->mode_changed, |
| new_crtc_state->active_changed, |
| new_crtc_state->connectors_changed); |
| |
| /* Copy all transient state flags into dc state */ |
| if (dm_new_crtc_state->stream) { |
| amdgpu_dm_crtc_copy_transient_flags(&dm_new_crtc_state->base, |
| dm_new_crtc_state->stream); |
| } |
| |
| /* handles headless hotplug case, updating new_state and |
| * aconnector as needed |
| */ |
| |
| if (modeset_required(new_crtc_state, dm_new_crtc_state->stream, dm_old_crtc_state->stream)) { |
| |
| DRM_DEBUG_DRIVER("Atomic commit: SET crtc id %d: [%p]\n", acrtc->crtc_id, acrtc); |
| |
| if (!dm_new_crtc_state->stream) { |
| /* |
| * this could happen because of issues with |
| * userspace notifications delivery. |
| * In this case userspace tries to set mode on |
| * display which is disconnected in fact. |
| * dc_sink is NULL in this case on aconnector. |
| * We expect reset mode will come soon. |
| * |
| * This can also happen when unplug is done |
| * during resume sequence ended |
| * |
| * In this case, we want to pretend we still |
| * have a sink to keep the pipe running so that |
| * hw state is consistent with the sw state |
| */ |
| DRM_DEBUG_DRIVER("%s: Failed to create new stream for crtc %d\n", |
| __func__, acrtc->base.base.id); |
| continue; |
| } |
| |
| if (dm_old_crtc_state->stream) |
| remove_stream(adev, acrtc, dm_old_crtc_state->stream); |
| |
| pm_runtime_get_noresume(dev->dev); |
| |
| acrtc->enabled = true; |
| acrtc->hw_mode = new_crtc_state->mode; |
| crtc->hwmode = new_crtc_state->mode; |
| } else if (modereset_required(new_crtc_state)) { |
| DRM_DEBUG_DRIVER("Atomic commit: RESET. crtc id %d:[%p]\n", acrtc->crtc_id, acrtc); |
| |
| /* i.e. reset mode */ |
| if (dm_old_crtc_state->stream) |
| remove_stream(adev, acrtc, dm_old_crtc_state->stream); |
| } |
| } /* for_each_crtc_in_state() */ |
| |
| if (dc_state) { |
| dm_enable_per_frame_crtc_master_sync(dc_state); |
| mutex_lock(&dm->dc_lock); |
| WARN_ON(!dc_commit_state(dm->dc, dc_state)); |
| mutex_unlock(&dm->dc_lock); |
| } |
| |
| for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); |
| |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| |
| if (dm_new_crtc_state->stream != NULL) { |
| const struct dc_stream_status *status = |
| dc_stream_get_status(dm_new_crtc_state->stream); |
| |
| if (!status) |
| status = dc_state_get_stream_status(dc_state, |
| dm_new_crtc_state->stream); |
| |
| if (!status) |
| DC_ERR("got no status for stream %p on acrtc%p\n", dm_new_crtc_state->stream, acrtc); |
| else |
| acrtc->otg_inst = status->primary_otg_inst; |
| } |
| } |
| |
| /* Handle scaling, underscan, and abm changes*/ |
| for_each_oldnew_connector_in_state(state, connector, old_con_state, new_con_state, i) { |
| struct dm_connector_state *dm_new_con_state = to_dm_connector_state(new_con_state); |
| struct dm_connector_state *dm_old_con_state = to_dm_connector_state(old_con_state); |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(dm_new_con_state->base.crtc); |
| struct dc_stream_status *status = NULL; |
| |
| if (acrtc) { |
| new_crtc_state = drm_atomic_get_new_crtc_state(state, &acrtc->base); |
| old_crtc_state = drm_atomic_get_old_crtc_state(state, &acrtc->base); |
| } |
| |
| /* Skip any modesets/resets */ |
| if (!acrtc || drm_atomic_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| |
| /* Skip anything that is not scaling or underscan changes */ |
| if (!is_scaling_state_different(dm_new_con_state, dm_old_con_state) && |
| (dm_new_crtc_state->abm_level == dm_old_crtc_state->abm_level)) |
| continue; |
| |
| update_stream_scaling_settings(&dm_new_con_state->base.crtc->mode, |
| dm_new_con_state, (struct dc_stream_state *)dm_new_crtc_state->stream); |
| |
| if (!dm_new_crtc_state->stream) |
| continue; |
| |
| status = dc_stream_get_status(dm_new_crtc_state->stream); |
| WARN_ON(!status); |
| WARN_ON(!status->plane_count); |
| |
| dm_new_crtc_state->stream->abm_level = dm_new_crtc_state->abm_level; |
| |
| /*TODO How it works with MPO ?*/ |
| if (!commit_planes_to_stream( |
| dm, |
| dm->dc, |
| status->plane_states, |
| status->plane_count, |
| dm_new_crtc_state, |
| to_dm_crtc_state(old_crtc_state), |
| dc_state)) |
| dm_error("%s: Failed to update stream scaling!\n", __func__); |
| } |
| |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| /* |
| * loop to enable interrupts on newly arrived crtc |
| */ |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); |
| bool modeset_needed; |
| |
| if (old_crtc_state->active && !new_crtc_state->active) |
| crtc_disable_count++; |
| |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| modeset_needed = modeset_required( |
| new_crtc_state, |
| dm_new_crtc_state->stream, |
| dm_old_crtc_state->stream); |
| |
| if (dm_new_crtc_state->stream == NULL || !modeset_needed) |
| continue; |
| |
| manage_dm_interrupts(adev, acrtc, true); |
| } |
| |
| /* update planes when needed per crtc*/ |
| for_each_new_crtc_in_state(state, crtc, new_crtc_state, j) { |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| |
| if (dm_new_crtc_state->stream) |
| amdgpu_dm_commit_planes(state, dc_state, dev, |
| dm, crtc, &wait_for_vblank); |
| } |
| |
| |
| /* |
| * send vblank event on all events not handled in flip and |
| * mark consumed event for drm_atomic_helper_commit_hw_done |
| */ |
| spin_lock_irqsave(&adev->ddev->event_lock, flags); |
| for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { |
| |
| if (new_crtc_state->event) |
| drm_send_event_locked(dev, &new_crtc_state->event->base); |
| |
| new_crtc_state->event = NULL; |
| } |
| spin_unlock_irqrestore(&adev->ddev->event_lock, flags); |
| |
| |
| if (wait_for_vblank) |
| drm_atomic_helper_wait_for_flip_done(dev, state); |
| |
| /* |
| * FIXME: |
| * Delay hw_done() until flip_done() is signaled. This is to block |
| * another commit from freeing the CRTC state while we're still |
| * waiting on flip_done. |
| */ |
| drm_atomic_helper_commit_hw_done(state); |
| |
| drm_atomic_helper_cleanup_planes(dev, state); |
| |
| /* |
| * Finally, drop a runtime PM reference for each newly disabled CRTC, |
| * so we can put the GPU into runtime suspend if we're not driving any |
| * displays anymore |
| */ |
| for (i = 0; i < crtc_disable_count; i++) |
| pm_runtime_put_autosuspend(dev->dev); |
| pm_runtime_mark_last_busy(dev->dev); |
| |
| if (dc_state_temp) |
| dc_release_state(dc_state_temp); |
| } |
| |
| |
| static int dm_force_atomic_commit(struct drm_connector *connector) |
| { |
| int ret = 0; |
| struct drm_device *ddev = connector->dev; |
| struct drm_atomic_state *state = drm_atomic_state_alloc(ddev); |
| struct amdgpu_crtc *disconnected_acrtc = to_amdgpu_crtc(connector->encoder->crtc); |
| struct drm_plane *plane = disconnected_acrtc->base.primary; |
| struct drm_connector_state *conn_state; |
| struct drm_crtc_state *crtc_state; |
| struct drm_plane_state *plane_state; |
| |
| if (!state) |
| return -ENOMEM; |
| |
| state->acquire_ctx = ddev->mode_config.acquire_ctx; |
| |
| /* Construct an atomic state to restore previous display setting */ |
| |
| /* |
| * Attach connectors to drm_atomic_state |
| */ |
| conn_state = drm_atomic_get_connector_state(state, connector); |
| |
| ret = PTR_ERR_OR_ZERO(conn_state); |
| if (ret) |
| goto err; |
| |
| /* Attach crtc to drm_atomic_state*/ |
| crtc_state = drm_atomic_get_crtc_state(state, &disconnected_acrtc->base); |
| |
| ret = PTR_ERR_OR_ZERO(crtc_state); |
| if (ret) |
| goto err; |
| |
| /* force a restore */ |
| crtc_state->mode_changed = true; |
| |
| /* Attach plane to drm_atomic_state */ |
| plane_state = drm_atomic_get_plane_state(state, plane); |
| |
| ret = PTR_ERR_OR_ZERO(plane_state); |
| if (ret) |
| goto err; |
| |
| |
| /* Call commit internally with the state we just constructed */ |
| ret = drm_atomic_commit(state); |
| if (!ret) |
| return 0; |
| |
| err: |
| DRM_ERROR("Restoring old state failed with %i\n", ret); |
| drm_atomic_state_put(state); |
| |
| return ret; |
| } |
| |
| /* |
| * This function handles all cases when set mode does not come upon hotplug. |
| * This includes when a display is unplugged then plugged back into the |
| * same port and when running without usermode desktop manager supprot |
| */ |
| void dm_restore_drm_connector_state(struct drm_device *dev, |
| struct drm_connector *connector) |
| { |
| struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); |
| struct amdgpu_crtc *disconnected_acrtc; |
| struct dm_crtc_state *acrtc_state; |
| |
| if (!aconnector->dc_sink || !connector->state || !connector->encoder) |
| return; |
| |
| disconnected_acrtc = to_amdgpu_crtc(connector->encoder->crtc); |
| if (!disconnected_acrtc) |
| return; |
| |
| acrtc_state = to_dm_crtc_state(disconnected_acrtc->base.state); |
| if (!acrtc_state->stream) |
| return; |
| |
| /* |
| * If the previous sink is not released and different from the current, |
| * we deduce we are in a state where we can not rely on usermode call |
| * to turn on the display, so we do it here |
| */ |
| if (acrtc_state->stream->sink != aconnector->dc_sink) |
| dm_force_atomic_commit(&aconnector->base); |
| } |
| |
| /* |
| * Grabs all modesetting locks to serialize against any blocking commits, |
| * Waits for completion of all non blocking commits. |
| */ |
| static int do_aquire_global_lock(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| struct drm_crtc *crtc; |
| struct drm_crtc_commit *commit; |
| long ret; |
| |
| /* |
| * Adding all modeset locks to aquire_ctx will |
| * ensure that when the framework release it the |
| * extra locks we are locking here will get released to |
| */ |
| ret = drm_modeset_lock_all_ctx(dev, state->acquire_ctx); |
| if (ret) |
| return ret; |
| |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { |
| spin_lock(&crtc->commit_lock); |
| commit = list_first_entry_or_null(&crtc->commit_list, |
| struct drm_crtc_commit, commit_entry); |
| if (commit) |
| drm_crtc_commit_get(commit); |
| spin_unlock(&crtc->commit_lock); |
| |
| if (!commit) |
| continue; |
| |
| /* |
| * Make sure all pending HW programming completed and |
| * page flips done |
| */ |
| ret = wait_for_completion_interruptible_timeout(&commit->hw_done, 10*HZ); |
| |
| if (ret > 0) |
| ret = wait_for_completion_interruptible_timeout( |
| &commit->flip_done, 10*HZ); |
| |
| if (ret == 0) |
| DRM_ERROR("[CRTC:%d:%s] hw_done or flip_done " |
| "timed out\n", crtc->base.id, crtc->name); |
| |
| drm_crtc_commit_put(commit); |
| } |
| |
| return ret < 0 ? ret : 0; |
| } |
| |
| static void get_freesync_config_for_crtc( |
| struct dm_crtc_state *new_crtc_state, |
| struct dm_connector_state *new_con_state) |
| { |
| struct mod_freesync_config config = {0}; |
| struct amdgpu_dm_connector *aconnector = |
| to_amdgpu_dm_connector(new_con_state->base.connector); |
| |
| new_crtc_state->vrr_supported = new_con_state->freesync_capable; |
| |
| if (new_con_state->freesync_capable) { |
| config.state = new_crtc_state->base.vrr_enabled ? |
| VRR_STATE_ACTIVE_VARIABLE : |
| VRR_STATE_INACTIVE; |
| config.min_refresh_in_uhz = |
| aconnector->min_vfreq * 1000000; |
| config.max_refresh_in_uhz = |
| aconnector->max_vfreq * 1000000; |
| config.vsif_supported = true; |
| config.btr = true; |
| } |
| |
| new_crtc_state->freesync_config = config; |
| } |
| |
| static void reset_freesync_config_for_crtc( |
| struct dm_crtc_state *new_crtc_state) |
| { |
| new_crtc_state->vrr_supported = false; |
| |
| memset(&new_crtc_state->vrr_params, 0, |
| sizeof(new_crtc_state->vrr_params)); |
| memset(&new_crtc_state->vrr_infopacket, 0, |
| sizeof(new_crtc_state->vrr_infopacket)); |
| } |
| |
| static int dm_update_crtcs_state(struct amdgpu_display_manager *dm, |
| struct drm_atomic_state *state, |
| bool enable, |
| bool *lock_and_validation_needed) |
| { |
| struct dm_atomic_state *dm_state = NULL; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *old_crtc_state, *new_crtc_state; |
| int i; |
| struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state; |
| struct dc_stream_state *new_stream; |
| int ret = 0; |
| |
| /* |
| * TODO Move this code into dm_crtc_atomic_check once we get rid of dc_validation_set |
| * update changed items |
| */ |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| struct amdgpu_crtc *acrtc = NULL; |
| struct amdgpu_dm_connector *aconnector = NULL; |
| struct drm_connector_state *drm_new_conn_state = NULL, *drm_old_conn_state = NULL; |
| struct dm_connector_state *dm_new_conn_state = NULL, *dm_old_conn_state = NULL; |
| struct drm_plane_state *new_plane_state = NULL; |
| |
| new_stream = NULL; |
| |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| acrtc = to_amdgpu_crtc(crtc); |
| |
| new_plane_state = drm_atomic_get_new_plane_state(state, new_crtc_state->crtc->primary); |
| |
| if (new_crtc_state->enable && new_plane_state && !new_plane_state->fb) { |
| ret = -EINVAL; |
| goto fail; |
| } |
| |
| aconnector = amdgpu_dm_find_first_crtc_matching_connector(state, crtc); |
| |
| /* TODO This hack should go away */ |
| if (aconnector && enable) { |
| /* Make sure fake sink is created in plug-in scenario */ |
| drm_new_conn_state = drm_atomic_get_new_connector_state(state, |
| &aconnector->base); |
| drm_old_conn_state = drm_atomic_get_old_connector_state(state, |
| &aconnector->base); |
| |
| if (IS_ERR(drm_new_conn_state)) { |
| ret = PTR_ERR_OR_ZERO(drm_new_conn_state); |
| break; |
| } |
| |
| dm_new_conn_state = to_dm_connector_state(drm_new_conn_state); |
| dm_old_conn_state = to_dm_connector_state(drm_old_conn_state); |
| |
| new_stream = create_stream_for_sink(aconnector, |
| &new_crtc_state->mode, |
| dm_new_conn_state, |
| dm_old_crtc_state->stream); |
| |
| /* |
| * we can have no stream on ACTION_SET if a display |
| * was disconnected during S3, in this case it is not an |
| * error, the OS will be updated after detection, and |
| * will do the right thing on next atomic commit |
| */ |
| |
| if (!new_stream) { |
| DRM_DEBUG_DRIVER("%s: Failed to create new stream for crtc %d\n", |
| __func__, acrtc->base.base.id); |
| break; |
| } |
| |
| dm_new_crtc_state->abm_level = dm_new_conn_state->abm_level; |
| |
| if (dc_is_stream_unchanged(new_stream, dm_old_crtc_state->stream) && |
| dc_is_stream_scaling_unchanged(new_stream, dm_old_crtc_state->stream)) { |
| new_crtc_state->mode_changed = false; |
| DRM_DEBUG_DRIVER("Mode change not required, setting mode_changed to %d", |
| new_crtc_state->mode_changed); |
| } |
| } |
| |
| if (!drm_atomic_crtc_needs_modeset(new_crtc_state)) |
| goto next_crtc; |
| |
| DRM_DEBUG_DRIVER( |
| "amdgpu_crtc id:%d crtc_state_flags: enable:%d, active:%d, " |
| "planes_changed:%d, mode_changed:%d,active_changed:%d," |
| "connectors_changed:%d\n", |
| acrtc->crtc_id, |
| new_crtc_state->enable, |
| new_crtc_state->active, |
| new_crtc_state->planes_changed, |
| new_crtc_state->mode_changed, |
| new_crtc_state->active_changed, |
| new_crtc_state->connectors_changed); |
| |
| /* Remove stream for any changed/disabled CRTC */ |
| if (!enable) { |
| |
| if (!dm_old_crtc_state->stream) |
| goto next_crtc; |
| |
| ret = dm_atomic_get_state(state, &dm_state); |
| if (ret) |
| goto fail; |
| |
| DRM_DEBUG_DRIVER("Disabling DRM crtc: %d\n", |
| crtc->base.id); |
| |
| /* i.e. reset mode */ |
| if (dc_remove_stream_from_ctx( |
| dm->dc, |
| dm_state->context, |
| dm_old_crtc_state->stream) != DC_OK) { |
| ret = -EINVAL; |
| goto fail; |
| } |
| |
| dc_stream_release(dm_old_crtc_state->stream); |
| dm_new_crtc_state->stream = NULL; |
| |
| reset_freesync_config_for_crtc(dm_new_crtc_state); |
| |
| *lock_and_validation_needed = true; |
| |
| } else {/* Add stream for any updated/enabled CRTC */ |
| /* |
| * Quick fix to prevent NULL pointer on new_stream when |
| * added MST connectors not found in existing crtc_state in the chained mode |
| * TODO: need to dig out the root cause of that |
| */ |
| if (!aconnector || (!aconnector->dc_sink && aconnector->mst_port)) |
| goto next_crtc; |
| |
| if (modereset_required(new_crtc_state)) |
| goto next_crtc; |
| |
| if (modeset_required(new_crtc_state, new_stream, |
| dm_old_crtc_state->stream)) { |
| |
| WARN_ON(dm_new_crtc_state->stream); |
| |
| ret = dm_atomic_get_state(state, &dm_state); |
| if (ret) |
| goto fail; |
| |
| dm_new_crtc_state->stream = new_stream; |
| |
| dc_stream_retain(new_stream); |
| |
| DRM_DEBUG_DRIVER("Enabling DRM crtc: %d\n", |
| crtc->base.id); |
| |
| if (dc_add_stream_to_ctx( |
| dm->dc, |
| dm_state->context, |
| dm_new_crtc_state->stream) != DC_OK) { |
| ret = -EINVAL; |
| goto fail; |
| } |
| |
| *lock_and_validation_needed = true; |
| } |
| } |
| |
| next_crtc: |
| /* Release extra reference */ |
| if (new_stream) |
| dc_stream_release(new_stream); |
| |
| /* |
| * We want to do dc stream updates that do not require a |
| * full modeset below. |
| */ |
| if (!(enable && aconnector && new_crtc_state->enable && |
| new_crtc_state->active)) |
| continue; |
| /* |
| * Given above conditions, the dc state cannot be NULL because: |
| * 1. We're in the process of enabling CRTCs (just been added |
| * to the dc context, or already is on the context) |
| * 2. Has a valid connector attached, and |
| * 3. Is currently active and enabled. |
| * => The dc stream state currently exists. |
| */ |
| BUG_ON(dm_new_crtc_state->stream == NULL); |
| |
| /* Scaling or underscan settings */ |
| if (is_scaling_state_different(dm_old_conn_state, dm_new_conn_state)) |
| update_stream_scaling_settings( |
| &new_crtc_state->mode, dm_new_conn_state, dm_new_crtc_state->stream); |
| |
| /* |
| * Color management settings. We also update color properties |
| * when a modeset is needed, to ensure it gets reprogrammed. |
| */ |
| if (dm_new_crtc_state->base.color_mgmt_changed || |
| drm_atomic_crtc_needs_modeset(new_crtc_state)) { |
| ret = amdgpu_dm_set_regamma_lut(dm_new_crtc_state); |
| if (ret) |
| goto fail; |
| amdgpu_dm_set_ctm(dm_new_crtc_state); |
| } |
| |
| /* Update Freesync settings. */ |
| get_freesync_config_for_crtc(dm_new_crtc_state, |
| dm_new_conn_state); |
| } |
| |
| return ret; |
| |
| fail: |
| if (new_stream) |
| dc_stream_release(new_stream); |
| return ret; |
| } |
| |
| static int dm_update_planes_state(struct dc *dc, |
| struct drm_atomic_state *state, |
| bool enable, |
| bool *lock_and_validation_needed) |
| { |
| |
| struct dm_atomic_state *dm_state = NULL; |
| struct drm_crtc *new_plane_crtc, *old_plane_crtc; |
| struct drm_crtc_state *old_crtc_state, *new_crtc_state; |
| struct drm_plane *plane; |
| struct drm_plane_state *old_plane_state, *new_plane_state; |
| struct dm_crtc_state *dm_new_crtc_state, *dm_old_crtc_state; |
| struct dm_plane_state *dm_new_plane_state, *dm_old_plane_state; |
| int i ; |
| /* TODO return page_flip_needed() function */ |
| bool pflip_needed = !state->allow_modeset; |
| int ret = 0; |
| |
| |
| /* Add new planes, in reverse order as DC expectation */ |
| for_each_oldnew_plane_in_state_reverse(state, plane, old_plane_state, new_plane_state, i) { |
| new_plane_crtc = new_plane_state->crtc; |
| old_plane_crtc = old_plane_state->crtc; |
| dm_new_plane_state = to_dm_plane_state(new_plane_state); |
| dm_old_plane_state = to_dm_plane_state(old_plane_state); |
| |
| /*TODO Implement atomic check for cursor plane */ |
| if (plane->type == DRM_PLANE_TYPE_CURSOR) |
| continue; |
| |
| /* Remove any changed/removed planes */ |
| if (!enable) { |
| if (pflip_needed && |
| plane->type != DRM_PLANE_TYPE_OVERLAY) |
| continue; |
| |
| if (!old_plane_crtc) |
| continue; |
| |
| old_crtc_state = drm_atomic_get_old_crtc_state( |
| state, old_plane_crtc); |
| dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); |
| |
| if (!dm_old_crtc_state->stream) |
| continue; |
| |
| DRM_DEBUG_ATOMIC("Disabling DRM plane: %d on DRM crtc %d\n", |
| plane->base.id, old_plane_crtc->base.id); |
| |
| ret = dm_atomic_get_state(state, &dm_state); |
| if (ret) |
| return ret; |
| |
| if (!dc_remove_plane_from_context( |
| dc, |
| dm_old_crtc_state->stream, |
| dm_old_plane_state->dc_state, |
| dm_state->context)) { |
| |
| ret = EINVAL; |
| return ret; |
| } |
| |
| |
| dc_plane_state_release(dm_old_plane_state->dc_state); |
| dm_new_plane_state->dc_state = NULL; |
| |
| *lock_and_validation_needed = true; |
| |
| } else { /* Add new planes */ |
| struct dc_plane_state *dc_new_plane_state; |
| |
| if (drm_atomic_plane_disabling(plane->state, new_plane_state)) |
| continue; |
| |
| if (!new_plane_crtc) |
| continue; |
| |
| new_crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_crtc); |
| dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); |
| |
| if (!dm_new_crtc_state->stream) |
| continue; |
| |
| if (pflip_needed && |
| plane->type != DRM_PLANE_TYPE_OVERLAY) |
| continue; |
| |
| WARN_ON(dm_new_plane_state->dc_state); |
| |
| dc_new_plane_state = dc_create_plane_state(dc); |
| if (!dc_new_plane_state) |
| return -ENOMEM; |
| |
| DRM_DEBUG_DRIVER("Enabling DRM plane: %d on DRM crtc %d\n", |
| plane->base.id, new_plane_crtc->base.id); |
| |
| ret = fill_plane_attributes( |
| new_plane_crtc->dev->dev_private, |
| dc_new_plane_state, |
| new_plane_state, |
| new_crtc_state); |
| if (ret) { |
| dc_plane_state_release(dc_new_plane_state); |
| return ret; |
| } |
| |
| ret = dm_atomic_get_state(state, &dm_state); |
| if (ret) { |
| dc_plane_state_release(dc_new_plane_state); |
| return ret; |
| } |
| |
| /* |
| * Any atomic check errors that occur after this will |
| * not need a release. The plane state will be attached |
| * to the stream, and therefore part of the atomic |
| * state. It'll be released when the atomic state is |
| * cleaned. |
| */ |
| if (!dc_add_plane_to_context( |
| dc, |
| dm_new_crtc_state->stream, |
| dc_new_plane_state, |
| dm_state->context)) { |
| |
| dc_plane_state_release(dc_new_plane_state); |
| return -EINVAL; |
| } |
| |
| dm_new_plane_state->dc_state = dc_new_plane_state; |
| |
| /* Tell DC to do a full surface update every time there |
| * is a plane change. Inefficient, but works for now. |
| */ |
| dm_new_plane_state->dc_state->update_flags.bits.full_update = 1; |
| |
| *lock_and_validation_needed = true; |
| } |
| } |
| |
| |
| return ret; |
| } |
| |
| static int |
| dm_determine_update_type_for_commit(struct dc *dc, |
| struct drm_atomic_state *state, |
| enum surface_update_type *out_type) |
| { |
| struct dm_atomic_state *dm_state = NULL, *old_dm_state = NULL; |
| int i, j, num_plane, ret = 0; |
| struct drm_plane_state *old_plane_state, *new_plane_state; |
| struct dm_plane_state *new_dm_plane_state, *old_dm_plane_state; |
| struct drm_crtc *new_plane_crtc, *old_plane_crtc; |
| struct drm_plane *plane; |
| |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *new_crtc_state, *old_crtc_state; |
| struct dm_crtc_state *new_dm_crtc_state, *old_dm_crtc_state; |
| struct dc_stream_status *status = NULL; |
| |
| struct dc_surface_update *updates = kzalloc(MAX_SURFACES * sizeof(struct dc_surface_update), GFP_KERNEL); |
| struct dc_plane_state *surface = kzalloc(MAX_SURFACES * sizeof(struct dc_plane_state), GFP_KERNEL); |
| struct dc_stream_update stream_update; |
| enum surface_update_type update_type = UPDATE_TYPE_FAST; |
| |
| if (!updates || !surface) { |
| DRM_ERROR("Plane or surface update failed to allocate"); |
| /* Set type to FULL to avoid crashing in DC*/ |
| update_type = UPDATE_TYPE_FULL; |
| goto cleanup; |
| } |
| |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| new_dm_crtc_state = to_dm_crtc_state(new_crtc_state); |
| old_dm_crtc_state = to_dm_crtc_state(old_crtc_state); |
| num_plane = 0; |
| |
| if (new_dm_crtc_state->stream) { |
| |
| for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, j) { |
| new_plane_crtc = new_plane_state->crtc; |
| old_plane_crtc = old_plane_state->crtc; |
| new_dm_plane_state = to_dm_plane_state(new_plane_state); |
| old_dm_plane_state = to_dm_plane_state(old_plane_state); |
| |
| if (plane->type == DRM_PLANE_TYPE_CURSOR) |
| continue; |
| |
| if (!state->allow_modeset) |
| continue; |
| |
| if (crtc == new_plane_crtc) { |
| updates[num_plane].surface = &surface[num_plane]; |
| |
| if (new_crtc_state->mode_changed) { |
| updates[num_plane].surface->src_rect = |
| new_dm_plane_state->dc_state->src_rect; |
| updates[num_plane].surface->dst_rect = |
| new_dm_plane_state->dc_state->dst_rect; |
| updates[num_plane].surface->rotation = |
| new_dm_plane_state->dc_state->rotation; |
| updates[num_plane].surface->in_transfer_func = |
| new_dm_plane_state->dc_state->in_transfer_func; |
| stream_update.dst = new_dm_crtc_state->stream->dst; |
| stream_update.src = new_dm_crtc_state->stream->src; |
| } |
| |
| if (new_crtc_state->color_mgmt_changed) { |
| updates[num_plane].gamma = |
| new_dm_plane_state->dc_state->gamma_correction; |
| updates[num_plane].in_transfer_func = |
| new_dm_plane_state->dc_state->in_transfer_func; |
| stream_update.gamut_remap = |
| &new_dm_crtc_state->stream->gamut_remap_matrix; |
| stream_update.out_transfer_func = |
| new_dm_crtc_state->stream->out_transfer_func; |
| } |
| |
| num_plane++; |
| } |
| } |
| |
| if (num_plane > 0) { |
| ret = dm_atomic_get_state(state, &dm_state); |
| if (ret) |
| goto cleanup; |
| |
| old_dm_state = dm_atomic_get_old_state(state); |
| if (!old_dm_state) { |
| ret = -EINVAL; |
| goto cleanup; |
| } |
| |
| status = dc_state_get_stream_status(old_dm_state->context, |
| new_dm_crtc_state->stream); |
| |
| update_type = dc_check_update_surfaces_for_stream(dc, updates, num_plane, |
| &stream_update, status); |
| |
| if (update_type > UPDATE_TYPE_MED) { |
| update_type = UPDATE_TYPE_FULL; |
| goto cleanup; |
| } |
| } |
| |
| } else if (!new_dm_crtc_state->stream && old_dm_crtc_state->stream) { |
| update_type = UPDATE_TYPE_FULL; |
| goto cleanup; |
| } |
| } |
| |
| cleanup: |
| kfree(updates); |
| kfree(surface); |
| |
| *out_type = update_type; |
| return ret; |
| } |
| |
| /** |
| * amdgpu_dm_atomic_check() - Atomic check implementation for AMDgpu DM. |
| * @dev: The DRM device |
| * @state: The atomic state to commit |
| * |
| * Validate that the given atomic state is programmable by DC into hardware. |
| * This involves constructing a &struct dc_state reflecting the new hardware |
| * state we wish to commit, then querying DC to see if it is programmable. It's |
| * important not to modify the existing DC state. Otherwise, atomic_check |
| * may unexpectedly commit hardware changes. |
| * |
| * When validating the DC state, it's important that the right locks are |
| * acquired. For full updates case which removes/adds/updates streams on one |
| * CRTC while flipping on another CRTC, acquiring global lock will guarantee |
| * that any such full update commit will wait for completion of any outstanding |
| * flip using DRMs synchronization events. See |
| * dm_determine_update_type_for_commit() |
| * |
| * Note that DM adds the affected connectors for all CRTCs in state, when that |
| * might not seem necessary. This is because DC stream creation requires the |
| * DC sink, which is tied to the DRM connector state. Cleaning this up should |
| * be possible but non-trivial - a possible TODO item. |
| * |
| * Return: -Error code if validation failed. |
| */ |
| static int amdgpu_dm_atomic_check(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| struct amdgpu_device *adev = dev->dev_private; |
| struct dm_atomic_state *dm_state = NULL; |
| struct dc *dc = adev->dm.dc; |
| struct drm_connector *connector; |
| struct drm_connector_state *old_con_state, *new_con_state; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *old_crtc_state, *new_crtc_state; |
| enum surface_update_type update_type = UPDATE_TYPE_FAST; |
| enum surface_update_type overall_update_type = UPDATE_TYPE_FAST; |
| |
| int ret, i; |
| |
| /* |
| * This bool will be set for true for any modeset/reset |
| * or plane update which implies non fast surface update. |
| */ |
| bool lock_and_validation_needed = false; |
| |
| ret = drm_atomic_helper_check_modeset(dev, state); |
| if (ret) |
| goto fail; |
| |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| if (!drm_atomic_crtc_needs_modeset(new_crtc_state) && |
| !new_crtc_state->color_mgmt_changed && |
| !new_crtc_state->vrr_enabled) |
| continue; |
| |
| if (!new_crtc_state->enable) |
| continue; |
| |
| ret = drm_atomic_add_affected_connectors(state, crtc); |
| if (ret) |
| return ret; |
| |
| ret = drm_atomic_add_affected_planes(state, crtc); |
| if (ret) |
| goto fail; |
| } |
| |
| /* Remove exiting planes if they are modified */ |
| ret = dm_update_planes_state(dc, state, false, &lock_and_validation_needed); |
| if (ret) { |
| goto fail; |
| } |
| |
| /* Disable all crtcs which require disable */ |
| ret = dm_update_crtcs_state(&adev->dm, state, false, &lock_and_validation_needed); |
| if (ret) { |
| goto fail; |
| } |
| |
| /* Enable all crtcs which require enable */ |
| ret = dm_update_crtcs_state(&adev->dm, state, true, &lock_and_validation_needed); |
| if (ret) { |
| goto fail; |
| } |
| |
| /* Add new/modified planes */ |
| ret = dm_update_planes_state(dc, state, true, &lock_and_validation_needed); |
| if (ret) { |
| goto fail; |
| } |
| |
| /* Run this here since we want to validate the streams we created */ |
| ret = drm_atomic_helper_check_planes(dev, state); |
| if (ret) |
| goto fail; |
| |
| /* Check scaling and underscan changes*/ |
| /* TODO Removed scaling changes validation due to inability to commit |
| * new stream into context w\o causing full reset. Need to |
| * decide how to handle. |
| */ |
| for_each_oldnew_connector_in_state(state, connector, old_con_state, new_con_state, i) { |
| struct dm_connector_state *dm_old_con_state = to_dm_connector_state(old_con_state); |
| struct dm_connector_state *dm_new_con_state = to_dm_connector_state(new_con_state); |
| struct amdgpu_crtc *acrtc = to_amdgpu_crtc(dm_new_con_state->base.crtc); |
| |
| /* Skip any modesets/resets */ |
| if (!acrtc || drm_atomic_crtc_needs_modeset( |
| drm_atomic_get_new_crtc_state(state, &acrtc->base))) |
| continue; |
| |
| /* Skip any thing not scale or underscan changes */ |
| if (!is_scaling_state_different(dm_new_con_state, dm_old_con_state)) |
| continue; |
| |
| overall_update_type = UPDATE_TYPE_FULL; |
| lock_and_validation_needed = true; |
| } |
| |
| ret = dm_determine_update_type_for_commit(dc, state, &update_type); |
| if (ret) |
| goto fail; |
| |
| if (overall_update_type < update_type) |
| overall_update_type = update_type; |
| |
| /* |
| * lock_and_validation_needed was an old way to determine if we need to set |
| * the global lock. Leaving it in to check if we broke any corner cases |
| * lock_and_validation_needed true = UPDATE_TYPE_FULL or UPDATE_TYPE_MED |
| * lock_and_validation_needed false = UPDATE_TYPE_FAST |
| */ |
| if (lock_and_validation_needed && overall_update_type <= UPDATE_TYPE_FAST) |
| WARN(1, "Global lock should be Set, overall_update_type should be UPDATE_TYPE_MED or UPDATE_TYPE_FULL"); |
| else if (!lock_and_validation_needed && overall_update_type > UPDATE_TYPE_FAST) |
| WARN(1, "Global lock should NOT be set, overall_update_type should be UPDATE_TYPE_FAST"); |
| |
| |
| if (overall_update_type > UPDATE_TYPE_FAST) { |
| ret = dm_atomic_get_state(state, &dm_state); |
| if (ret) |
| goto fail; |
| |
| ret = do_aquire_global_lock(dev, state); |
| if (ret) |
| goto fail; |
| |
| if (dc_validate_global_state(dc, dm_state->context) != DC_OK) { |
| ret = -EINVAL; |
| goto fail; |
| } |
| } else if (state->legacy_cursor_update) { |
| /* |
| * This is a fast cursor update coming from the plane update |
| * helper, check if it can be done asynchronously for better |
| * performance. |
| */ |
| state->async_update = !drm_atomic_helper_async_check(dev, state); |
| } |
| |
| /* Must be success */ |
| WARN_ON(ret); |
| return ret; |
| |
| fail: |
| if (ret == -EDEADLK) |
| DRM_DEBUG_DRIVER("Atomic check stopped to avoid deadlock.\n"); |
| else if (ret == -EINTR || ret == -EAGAIN || ret == -ERESTARTSYS) |
| DRM_DEBUG_DRIVER("Atomic check stopped due to signal.\n"); |
| else |
| DRM_DEBUG_DRIVER("Atomic check failed with err: %d \n", ret); |
| |
| return ret; |
| } |
| |
| static bool is_dp_capable_without_timing_msa(struct dc *dc, |
| struct amdgpu_dm_connector *amdgpu_dm_connector) |
| { |
| uint8_t dpcd_data; |
| bool capable = false; |
| |
| if (amdgpu_dm_connector->dc_link && |
| dm_helpers_dp_read_dpcd( |
| NULL, |
| amdgpu_dm_connector->dc_link, |
| DP_DOWN_STREAM_PORT_COUNT, |
| &dpcd_data, |
| sizeof(dpcd_data))) { |
| capable = (dpcd_data & DP_MSA_TIMING_PAR_IGNORED) ? true:false; |
| } |
| |
| return capable; |
| } |
| void amdgpu_dm_update_freesync_caps(struct drm_connector *connector, |
| struct edid *edid) |
| { |
| int i; |
| bool edid_check_required; |
| struct detailed_timing *timing; |
| struct detailed_non_pixel *data; |
| struct detailed_data_monitor_range *range; |
| struct amdgpu_dm_connector *amdgpu_dm_connector = |
| to_amdgpu_dm_connector(connector); |
| struct dm_connector_state *dm_con_state = NULL; |
| |
| struct drm_device *dev = connector->dev; |
| struct amdgpu_device *adev = dev->dev_private; |
| bool freesync_capable = false; |
| |
| if (!connector->state) { |
| DRM_ERROR("%s - Connector has no state", __func__); |
| goto update; |
| } |
| |
| if (!edid) { |
| dm_con_state = to_dm_connector_state(connector->state); |
| |
| amdgpu_dm_connector->min_vfreq = 0; |
| amdgpu_dm_connector->max_vfreq = 0; |
| amdgpu_dm_connector->pixel_clock_mhz = 0; |
| |
| goto update; |
| } |
| |
| dm_con_state = to_dm_connector_state(connector->state); |
| |
| edid_check_required = false; |
| if (!amdgpu_dm_connector->dc_sink) { |
| DRM_ERROR("dc_sink NULL, could not add free_sync module.\n"); |
| goto update; |
| } |
| if (!adev->dm.freesync_module) |
| goto update; |
| /* |
| * if edid non zero restrict freesync only for dp and edp |
| */ |
| if (edid) { |
| if (amdgpu_dm_connector->dc_sink->sink_signal == SIGNAL_TYPE_DISPLAY_PORT |
| || amdgpu_dm_connector->dc_sink->sink_signal == SIGNAL_TYPE_EDP) { |
| edid_check_required = is_dp_capable_without_timing_msa( |
| adev->dm.dc, |
| amdgpu_dm_connector); |
| } |
| } |
| if (edid_check_required == true && (edid->version > 1 || |
| (edid->version == 1 && edid->revision > 1))) { |
| for (i = 0; i < 4; i++) { |
| |
| timing = &edid->detailed_timings[i]; |
| data = &timing->data.other_data; |
| range = &data->data.range; |
| /* |
| * Check if monitor has continuous frequency mode |
| */ |
| if (data->type != EDID_DETAIL_MONITOR_RANGE) |
| continue; |
| /* |
| * Check for flag range limits only. If flag == 1 then |
| * no additional timing information provided. |
| * Default GTF, GTF Secondary curve and CVT are not |
| * supported |
| */ |
| if (range->flags != 1) |
| continue; |
| |
| amdgpu_dm_connector->min_vfreq = range->min_vfreq; |
| amdgpu_dm_connector->max_vfreq = range->max_vfreq; |
| amdgpu_dm_connector->pixel_clock_mhz = |
| range->pixel_clock_mhz * 10; |
| break; |
| } |
| |
| if (amdgpu_dm_connector->max_vfreq - |
| amdgpu_dm_connector->min_vfreq > 10) { |
| |
| freesync_capable = true; |
| } |
| } |
| |
| update: |
| if (dm_con_state) |
| dm_con_state->freesync_capable = freesync_capable; |
| |
| if (connector->vrr_capable_property) |
| drm_connector_set_vrr_capable_property(connector, |
| freesync_capable); |
| } |
| |