| /* |
| * Copyright (c) 2006 Luc Verhaegen (quirks list) |
| * Copyright (c) 2007-2008 Intel Corporation |
| * Jesse Barnes <jesse.barnes@intel.com> |
| * Copyright 2010 Red Hat, Inc. |
| * |
| * DDC probing routines (drm_ddc_read & drm_do_probe_ddc_edid) originally from |
| * FB layer. |
| * Copyright (C) 2006 Dennis Munsie <dmunsie@cecropia.com> |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sub license, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/hdmi.h> |
| #include <linux/i2c.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/vga_switcheroo.h> |
| |
| #include <drm/drm_displayid.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_encoder.h> |
| #include <drm/drm_print.h> |
| |
| #include "drm_crtc_internal.h" |
| |
| static int oui(u8 first, u8 second, u8 third) |
| { |
| return (first << 16) | (second << 8) | third; |
| } |
| |
| #define EDID_EST_TIMINGS 16 |
| #define EDID_STD_TIMINGS 8 |
| #define EDID_DETAILED_TIMINGS 4 |
| |
| /* |
| * EDID blocks out in the wild have a variety of bugs, try to collect |
| * them here (note that userspace may work around broken monitors first, |
| * but fixes should make their way here so that the kernel "just works" |
| * on as many displays as possible). |
| */ |
| |
| /* First detailed mode wrong, use largest 60Hz mode */ |
| #define EDID_QUIRK_PREFER_LARGE_60 (1 << 0) |
| /* Reported 135MHz pixel clock is too high, needs adjustment */ |
| #define EDID_QUIRK_135_CLOCK_TOO_HIGH (1 << 1) |
| /* Prefer the largest mode at 75 Hz */ |
| #define EDID_QUIRK_PREFER_LARGE_75 (1 << 2) |
| /* Detail timing is in cm not mm */ |
| #define EDID_QUIRK_DETAILED_IN_CM (1 << 3) |
| /* Detailed timing descriptors have bogus size values, so just take the |
| * maximum size and use that. |
| */ |
| #define EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE (1 << 4) |
| /* use +hsync +vsync for detailed mode */ |
| #define EDID_QUIRK_DETAILED_SYNC_PP (1 << 6) |
| /* Force reduced-blanking timings for detailed modes */ |
| #define EDID_QUIRK_FORCE_REDUCED_BLANKING (1 << 7) |
| /* Force 8bpc */ |
| #define EDID_QUIRK_FORCE_8BPC (1 << 8) |
| /* Force 12bpc */ |
| #define EDID_QUIRK_FORCE_12BPC (1 << 9) |
| /* Force 6bpc */ |
| #define EDID_QUIRK_FORCE_6BPC (1 << 10) |
| /* Force 10bpc */ |
| #define EDID_QUIRK_FORCE_10BPC (1 << 11) |
| /* Non desktop display (i.e. HMD) */ |
| #define EDID_QUIRK_NON_DESKTOP (1 << 12) |
| /* Cap the DSC target bitrate to 15bpp */ |
| #define EDID_QUIRK_CAP_DSC_15BPP (1 << 13) |
| |
| #define MICROSOFT_IEEE_OUI 0xca125c |
| |
| struct detailed_mode_closure { |
| struct drm_connector *connector; |
| const struct drm_edid *drm_edid; |
| bool preferred; |
| int modes; |
| }; |
| |
| #define LEVEL_DMT 0 |
| #define LEVEL_GTF 1 |
| #define LEVEL_GTF2 2 |
| #define LEVEL_CVT 3 |
| |
| #define EDID_QUIRK(vend_chr_0, vend_chr_1, vend_chr_2, product_id, _quirks) \ |
| { \ |
| .panel_id = drm_edid_encode_panel_id(vend_chr_0, vend_chr_1, vend_chr_2, \ |
| product_id), \ |
| .quirks = _quirks \ |
| } |
| |
| static const struct edid_quirk { |
| u32 panel_id; |
| u32 quirks; |
| } edid_quirk_list[] = { |
| /* Acer AL1706 */ |
| EDID_QUIRK('A', 'C', 'R', 44358, EDID_QUIRK_PREFER_LARGE_60), |
| /* Acer F51 */ |
| EDID_QUIRK('A', 'P', 'I', 0x7602, EDID_QUIRK_PREFER_LARGE_60), |
| |
| /* AEO model 0 reports 8 bpc, but is a 6 bpc panel */ |
| EDID_QUIRK('A', 'E', 'O', 0, EDID_QUIRK_FORCE_6BPC), |
| |
| /* BOE model on HP Pavilion 15-n233sl reports 8 bpc, but is a 6 bpc panel */ |
| EDID_QUIRK('B', 'O', 'E', 0x78b, EDID_QUIRK_FORCE_6BPC), |
| |
| /* CPT panel of Asus UX303LA reports 8 bpc, but is a 6 bpc panel */ |
| EDID_QUIRK('C', 'P', 'T', 0x17df, EDID_QUIRK_FORCE_6BPC), |
| |
| /* SDC panel of Lenovo B50-80 reports 8 bpc, but is a 6 bpc panel */ |
| EDID_QUIRK('S', 'D', 'C', 0x3652, EDID_QUIRK_FORCE_6BPC), |
| |
| /* BOE model 0x0771 reports 8 bpc, but is a 6 bpc panel */ |
| EDID_QUIRK('B', 'O', 'E', 0x0771, EDID_QUIRK_FORCE_6BPC), |
| |
| /* Belinea 10 15 55 */ |
| EDID_QUIRK('M', 'A', 'X', 1516, EDID_QUIRK_PREFER_LARGE_60), |
| EDID_QUIRK('M', 'A', 'X', 0x77e, EDID_QUIRK_PREFER_LARGE_60), |
| |
| /* Envision Peripherals, Inc. EN-7100e */ |
| EDID_QUIRK('E', 'P', 'I', 59264, EDID_QUIRK_135_CLOCK_TOO_HIGH), |
| /* Envision EN2028 */ |
| EDID_QUIRK('E', 'P', 'I', 8232, EDID_QUIRK_PREFER_LARGE_60), |
| |
| /* Funai Electronics PM36B */ |
| EDID_QUIRK('F', 'C', 'M', 13600, EDID_QUIRK_PREFER_LARGE_75 | |
| EDID_QUIRK_DETAILED_IN_CM), |
| |
| /* LG 27GP950 */ |
| EDID_QUIRK('G', 'S', 'M', 0x5bbf, EDID_QUIRK_CAP_DSC_15BPP), |
| |
| /* LG 27GN950 */ |
| EDID_QUIRK('G', 'S', 'M', 0x5b9a, EDID_QUIRK_CAP_DSC_15BPP), |
| |
| /* LGD panel of HP zBook 17 G2, eDP 10 bpc, but reports unknown bpc */ |
| EDID_QUIRK('L', 'G', 'D', 764, EDID_QUIRK_FORCE_10BPC), |
| |
| /* LG Philips LCD LP154W01-A5 */ |
| EDID_QUIRK('L', 'P', 'L', 0, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE), |
| EDID_QUIRK('L', 'P', 'L', 0x2a00, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE), |
| |
| /* Samsung SyncMaster 205BW. Note: irony */ |
| EDID_QUIRK('S', 'A', 'M', 541, EDID_QUIRK_DETAILED_SYNC_PP), |
| /* Samsung SyncMaster 22[5-6]BW */ |
| EDID_QUIRK('S', 'A', 'M', 596, EDID_QUIRK_PREFER_LARGE_60), |
| EDID_QUIRK('S', 'A', 'M', 638, EDID_QUIRK_PREFER_LARGE_60), |
| |
| /* Sony PVM-2541A does up to 12 bpc, but only reports max 8 bpc */ |
| EDID_QUIRK('S', 'N', 'Y', 0x2541, EDID_QUIRK_FORCE_12BPC), |
| |
| /* ViewSonic VA2026w */ |
| EDID_QUIRK('V', 'S', 'C', 5020, EDID_QUIRK_FORCE_REDUCED_BLANKING), |
| |
| /* Medion MD 30217 PG */ |
| EDID_QUIRK('M', 'E', 'D', 0x7b8, EDID_QUIRK_PREFER_LARGE_75), |
| |
| /* Lenovo G50 */ |
| EDID_QUIRK('S', 'D', 'C', 18514, EDID_QUIRK_FORCE_6BPC), |
| |
| /* Panel in Samsung NP700G7A-S01PL notebook reports 6bpc */ |
| EDID_QUIRK('S', 'E', 'C', 0xd033, EDID_QUIRK_FORCE_8BPC), |
| |
| /* Rotel RSX-1058 forwards sink's EDID but only does HDMI 1.1*/ |
| EDID_QUIRK('E', 'T', 'R', 13896, EDID_QUIRK_FORCE_8BPC), |
| |
| /* Valve Index Headset */ |
| EDID_QUIRK('V', 'L', 'V', 0x91a8, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91b0, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91b1, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91b2, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91b3, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91b4, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91b5, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91b6, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91b7, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91b8, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91b9, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91ba, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91bb, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91bc, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91bd, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91be, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('V', 'L', 'V', 0x91bf, EDID_QUIRK_NON_DESKTOP), |
| |
| /* HTC Vive and Vive Pro VR Headsets */ |
| EDID_QUIRK('H', 'V', 'R', 0xaa01, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('H', 'V', 'R', 0xaa02, EDID_QUIRK_NON_DESKTOP), |
| |
| /* Oculus Rift DK1, DK2, CV1 and Rift S VR Headsets */ |
| EDID_QUIRK('O', 'V', 'R', 0x0001, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('O', 'V', 'R', 0x0003, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('O', 'V', 'R', 0x0004, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('O', 'V', 'R', 0x0012, EDID_QUIRK_NON_DESKTOP), |
| |
| /* Windows Mixed Reality Headsets */ |
| EDID_QUIRK('A', 'C', 'R', 0x7fce, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('L', 'E', 'N', 0x0408, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('F', 'U', 'J', 0x1970, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('D', 'E', 'L', 0x7fce, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('S', 'E', 'C', 0x144a, EDID_QUIRK_NON_DESKTOP), |
| EDID_QUIRK('A', 'U', 'S', 0xc102, EDID_QUIRK_NON_DESKTOP), |
| |
| /* Sony PlayStation VR Headset */ |
| EDID_QUIRK('S', 'N', 'Y', 0x0704, EDID_QUIRK_NON_DESKTOP), |
| |
| /* Sensics VR Headsets */ |
| EDID_QUIRK('S', 'E', 'N', 0x1019, EDID_QUIRK_NON_DESKTOP), |
| |
| /* OSVR HDK and HDK2 VR Headsets */ |
| EDID_QUIRK('S', 'V', 'R', 0x1019, EDID_QUIRK_NON_DESKTOP), |
| }; |
| |
| /* |
| * Autogenerated from the DMT spec. |
| * This table is copied from xfree86/modes/xf86EdidModes.c. |
| */ |
| static const struct drm_display_mode drm_dmt_modes[] = { |
| /* 0x01 - 640x350@85Hz */ |
| { DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 31500, 640, 672, |
| 736, 832, 0, 350, 382, 385, 445, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x02 - 640x400@85Hz */ |
| { DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 31500, 640, 672, |
| 736, 832, 0, 400, 401, 404, 445, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x03 - 720x400@85Hz */ |
| { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 756, |
| 828, 936, 0, 400, 401, 404, 446, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x04 - 640x480@60Hz */ |
| { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656, |
| 752, 800, 0, 480, 490, 492, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x05 - 640x480@72Hz */ |
| { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664, |
| 704, 832, 0, 480, 489, 492, 520, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x06 - 640x480@75Hz */ |
| { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656, |
| 720, 840, 0, 480, 481, 484, 500, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x07 - 640x480@85Hz */ |
| { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 36000, 640, 696, |
| 752, 832, 0, 480, 481, 484, 509, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x08 - 800x600@56Hz */ |
| { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824, |
| 896, 1024, 0, 600, 601, 603, 625, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x09 - 800x600@60Hz */ |
| { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840, |
| 968, 1056, 0, 600, 601, 605, 628, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x0a - 800x600@72Hz */ |
| { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856, |
| 976, 1040, 0, 600, 637, 643, 666, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x0b - 800x600@75Hz */ |
| { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816, |
| 896, 1056, 0, 600, 601, 604, 625, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x0c - 800x600@85Hz */ |
| { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 56250, 800, 832, |
| 896, 1048, 0, 600, 601, 604, 631, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x0d - 800x600@120Hz RB */ |
| { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 73250, 800, 848, |
| 880, 960, 0, 600, 603, 607, 636, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x0e - 848x480@60Hz */ |
| { DRM_MODE("848x480", DRM_MODE_TYPE_DRIVER, 33750, 848, 864, |
| 976, 1088, 0, 480, 486, 494, 517, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x0f - 1024x768@43Hz, interlace */ |
| { DRM_MODE("1024x768i", DRM_MODE_TYPE_DRIVER, 44900, 1024, 1032, |
| 1208, 1264, 0, 768, 768, 776, 817, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | |
| DRM_MODE_FLAG_INTERLACE) }, |
| /* 0x10 - 1024x768@60Hz */ |
| { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048, |
| 1184, 1344, 0, 768, 771, 777, 806, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x11 - 1024x768@70Hz */ |
| { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048, |
| 1184, 1328, 0, 768, 771, 777, 806, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x12 - 1024x768@75Hz */ |
| { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78750, 1024, 1040, |
| 1136, 1312, 0, 768, 769, 772, 800, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x13 - 1024x768@85Hz */ |
| { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 94500, 1024, 1072, |
| 1168, 1376, 0, 768, 769, 772, 808, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x14 - 1024x768@120Hz RB */ |
| { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 115500, 1024, 1072, |
| 1104, 1184, 0, 768, 771, 775, 813, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x15 - 1152x864@75Hz */ |
| { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216, |
| 1344, 1600, 0, 864, 865, 868, 900, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x55 - 1280x720@60Hz */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1390, |
| 1430, 1650, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x16 - 1280x768@60Hz RB */ |
| { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 68250, 1280, 1328, |
| 1360, 1440, 0, 768, 771, 778, 790, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x17 - 1280x768@60Hz */ |
| { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 79500, 1280, 1344, |
| 1472, 1664, 0, 768, 771, 778, 798, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x18 - 1280x768@75Hz */ |
| { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 102250, 1280, 1360, |
| 1488, 1696, 0, 768, 771, 778, 805, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x19 - 1280x768@85Hz */ |
| { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 117500, 1280, 1360, |
| 1496, 1712, 0, 768, 771, 778, 809, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x1a - 1280x768@120Hz RB */ |
| { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 140250, 1280, 1328, |
| 1360, 1440, 0, 768, 771, 778, 813, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x1b - 1280x800@60Hz RB */ |
| { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 71000, 1280, 1328, |
| 1360, 1440, 0, 800, 803, 809, 823, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x1c - 1280x800@60Hz */ |
| { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 83500, 1280, 1352, |
| 1480, 1680, 0, 800, 803, 809, 831, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x1d - 1280x800@75Hz */ |
| { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 106500, 1280, 1360, |
| 1488, 1696, 0, 800, 803, 809, 838, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x1e - 1280x800@85Hz */ |
| { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 122500, 1280, 1360, |
| 1496, 1712, 0, 800, 803, 809, 843, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x1f - 1280x800@120Hz RB */ |
| { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 146250, 1280, 1328, |
| 1360, 1440, 0, 800, 803, 809, 847, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x20 - 1280x960@60Hz */ |
| { DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1376, |
| 1488, 1800, 0, 960, 961, 964, 1000, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x21 - 1280x960@85Hz */ |
| { DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1344, |
| 1504, 1728, 0, 960, 961, 964, 1011, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x22 - 1280x960@120Hz RB */ |
| { DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 175500, 1280, 1328, |
| 1360, 1440, 0, 960, 963, 967, 1017, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x23 - 1280x1024@60Hz */ |
| { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1328, |
| 1440, 1688, 0, 1024, 1025, 1028, 1066, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x24 - 1280x1024@75Hz */ |
| { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296, |
| 1440, 1688, 0, 1024, 1025, 1028, 1066, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x25 - 1280x1024@85Hz */ |
| { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 157500, 1280, 1344, |
| 1504, 1728, 0, 1024, 1025, 1028, 1072, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x26 - 1280x1024@120Hz RB */ |
| { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 187250, 1280, 1328, |
| 1360, 1440, 0, 1024, 1027, 1034, 1084, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x27 - 1360x768@60Hz */ |
| { DRM_MODE("1360x768", DRM_MODE_TYPE_DRIVER, 85500, 1360, 1424, |
| 1536, 1792, 0, 768, 771, 777, 795, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x28 - 1360x768@120Hz RB */ |
| { DRM_MODE("1360x768", DRM_MODE_TYPE_DRIVER, 148250, 1360, 1408, |
| 1440, 1520, 0, 768, 771, 776, 813, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x51 - 1366x768@60Hz */ |
| { DRM_MODE("1366x768", DRM_MODE_TYPE_DRIVER, 85500, 1366, 1436, |
| 1579, 1792, 0, 768, 771, 774, 798, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x56 - 1366x768@60Hz */ |
| { DRM_MODE("1366x768", DRM_MODE_TYPE_DRIVER, 72000, 1366, 1380, |
| 1436, 1500, 0, 768, 769, 772, 800, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x29 - 1400x1050@60Hz RB */ |
| { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 101000, 1400, 1448, |
| 1480, 1560, 0, 1050, 1053, 1057, 1080, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x2a - 1400x1050@60Hz */ |
| { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 121750, 1400, 1488, |
| 1632, 1864, 0, 1050, 1053, 1057, 1089, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x2b - 1400x1050@75Hz */ |
| { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 156000, 1400, 1504, |
| 1648, 1896, 0, 1050, 1053, 1057, 1099, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x2c - 1400x1050@85Hz */ |
| { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 179500, 1400, 1504, |
| 1656, 1912, 0, 1050, 1053, 1057, 1105, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x2d - 1400x1050@120Hz RB */ |
| { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 208000, 1400, 1448, |
| 1480, 1560, 0, 1050, 1053, 1057, 1112, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x2e - 1440x900@60Hz RB */ |
| { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 88750, 1440, 1488, |
| 1520, 1600, 0, 900, 903, 909, 926, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x2f - 1440x900@60Hz */ |
| { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 106500, 1440, 1520, |
| 1672, 1904, 0, 900, 903, 909, 934, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x30 - 1440x900@75Hz */ |
| { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 136750, 1440, 1536, |
| 1688, 1936, 0, 900, 903, 909, 942, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x31 - 1440x900@85Hz */ |
| { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 157000, 1440, 1544, |
| 1696, 1952, 0, 900, 903, 909, 948, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x32 - 1440x900@120Hz RB */ |
| { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 182750, 1440, 1488, |
| 1520, 1600, 0, 900, 903, 909, 953, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x53 - 1600x900@60Hz */ |
| { DRM_MODE("1600x900", DRM_MODE_TYPE_DRIVER, 108000, 1600, 1624, |
| 1704, 1800, 0, 900, 901, 904, 1000, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x33 - 1600x1200@60Hz */ |
| { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 162000, 1600, 1664, |
| 1856, 2160, 0, 1200, 1201, 1204, 1250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x34 - 1600x1200@65Hz */ |
| { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 175500, 1600, 1664, |
| 1856, 2160, 0, 1200, 1201, 1204, 1250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x35 - 1600x1200@70Hz */ |
| { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 189000, 1600, 1664, |
| 1856, 2160, 0, 1200, 1201, 1204, 1250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x36 - 1600x1200@75Hz */ |
| { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 202500, 1600, 1664, |
| 1856, 2160, 0, 1200, 1201, 1204, 1250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x37 - 1600x1200@85Hz */ |
| { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 229500, 1600, 1664, |
| 1856, 2160, 0, 1200, 1201, 1204, 1250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x38 - 1600x1200@120Hz RB */ |
| { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 268250, 1600, 1648, |
| 1680, 1760, 0, 1200, 1203, 1207, 1271, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x39 - 1680x1050@60Hz RB */ |
| { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 119000, 1680, 1728, |
| 1760, 1840, 0, 1050, 1053, 1059, 1080, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x3a - 1680x1050@60Hz */ |
| { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 146250, 1680, 1784, |
| 1960, 2240, 0, 1050, 1053, 1059, 1089, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x3b - 1680x1050@75Hz */ |
| { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 187000, 1680, 1800, |
| 1976, 2272, 0, 1050, 1053, 1059, 1099, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x3c - 1680x1050@85Hz */ |
| { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 214750, 1680, 1808, |
| 1984, 2288, 0, 1050, 1053, 1059, 1105, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x3d - 1680x1050@120Hz RB */ |
| { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 245500, 1680, 1728, |
| 1760, 1840, 0, 1050, 1053, 1059, 1112, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x3e - 1792x1344@60Hz */ |
| { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 204750, 1792, 1920, |
| 2120, 2448, 0, 1344, 1345, 1348, 1394, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x3f - 1792x1344@75Hz */ |
| { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 261000, 1792, 1888, |
| 2104, 2456, 0, 1344, 1345, 1348, 1417, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x40 - 1792x1344@120Hz RB */ |
| { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 333250, 1792, 1840, |
| 1872, 1952, 0, 1344, 1347, 1351, 1423, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x41 - 1856x1392@60Hz */ |
| { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 218250, 1856, 1952, |
| 2176, 2528, 0, 1392, 1393, 1396, 1439, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x42 - 1856x1392@75Hz */ |
| { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 288000, 1856, 1984, |
| 2208, 2560, 0, 1392, 1393, 1396, 1500, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x43 - 1856x1392@120Hz RB */ |
| { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 356500, 1856, 1904, |
| 1936, 2016, 0, 1392, 1395, 1399, 1474, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x52 - 1920x1080@60Hz */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2008, |
| 2052, 2200, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x44 - 1920x1200@60Hz RB */ |
| { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 154000, 1920, 1968, |
| 2000, 2080, 0, 1200, 1203, 1209, 1235, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x45 - 1920x1200@60Hz */ |
| { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 193250, 1920, 2056, |
| 2256, 2592, 0, 1200, 1203, 1209, 1245, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x46 - 1920x1200@75Hz */ |
| { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 245250, 1920, 2056, |
| 2264, 2608, 0, 1200, 1203, 1209, 1255, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x47 - 1920x1200@85Hz */ |
| { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 281250, 1920, 2064, |
| 2272, 2624, 0, 1200, 1203, 1209, 1262, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x48 - 1920x1200@120Hz RB */ |
| { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 317000, 1920, 1968, |
| 2000, 2080, 0, 1200, 1203, 1209, 1271, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x49 - 1920x1440@60Hz */ |
| { DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 234000, 1920, 2048, |
| 2256, 2600, 0, 1440, 1441, 1444, 1500, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x4a - 1920x1440@75Hz */ |
| { DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2064, |
| 2288, 2640, 0, 1440, 1441, 1444, 1500, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x4b - 1920x1440@120Hz RB */ |
| { DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 380500, 1920, 1968, |
| 2000, 2080, 0, 1440, 1443, 1447, 1525, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x54 - 2048x1152@60Hz */ |
| { DRM_MODE("2048x1152", DRM_MODE_TYPE_DRIVER, 162000, 2048, 2074, |
| 2154, 2250, 0, 1152, 1153, 1156, 1200, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x4c - 2560x1600@60Hz RB */ |
| { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 268500, 2560, 2608, |
| 2640, 2720, 0, 1600, 1603, 1609, 1646, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x4d - 2560x1600@60Hz */ |
| { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 348500, 2560, 2752, |
| 3032, 3504, 0, 1600, 1603, 1609, 1658, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x4e - 2560x1600@75Hz */ |
| { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 443250, 2560, 2768, |
| 3048, 3536, 0, 1600, 1603, 1609, 1672, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x4f - 2560x1600@85Hz */ |
| { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 505250, 2560, 2768, |
| 3048, 3536, 0, 1600, 1603, 1609, 1682, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 0x50 - 2560x1600@120Hz RB */ |
| { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 552750, 2560, 2608, |
| 2640, 2720, 0, 1600, 1603, 1609, 1694, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x57 - 4096x2160@60Hz RB */ |
| { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 556744, 4096, 4104, |
| 4136, 4176, 0, 2160, 2208, 2216, 2222, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 0x58 - 4096x2160@59.94Hz RB */ |
| { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 556188, 4096, 4104, |
| 4136, 4176, 0, 2160, 2208, 2216, 2222, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| }; |
| |
| /* |
| * These more or less come from the DMT spec. The 720x400 modes are |
| * inferred from historical 80x25 practice. The 640x480@67 and 832x624@75 |
| * modes are old-school Mac modes. The EDID spec says the 1152x864@75 mode |
| * should be 1152x870, again for the Mac, but instead we use the x864 DMT |
| * mode. |
| * |
| * The DMT modes have been fact-checked; the rest are mild guesses. |
| */ |
| static const struct drm_display_mode edid_est_modes[] = { |
| { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840, |
| 968, 1056, 0, 600, 601, 605, 628, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@60Hz */ |
| { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824, |
| 896, 1024, 0, 600, 601, 603, 625, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@56Hz */ |
| { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656, |
| 720, 840, 0, 480, 481, 484, 500, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@75Hz */ |
| { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664, |
| 704, 832, 0, 480, 489, 492, 520, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@72Hz */ |
| { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 30240, 640, 704, |
| 768, 864, 0, 480, 483, 486, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@67Hz */ |
| { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656, |
| 752, 800, 0, 480, 490, 492, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@60Hz */ |
| { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 738, |
| 846, 900, 0, 400, 421, 423, 449, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 720x400@88Hz */ |
| { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 28320, 720, 738, |
| 846, 900, 0, 400, 412, 414, 449, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 720x400@70Hz */ |
| { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296, |
| 1440, 1688, 0, 1024, 1025, 1028, 1066, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1280x1024@75Hz */ |
| { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78750, 1024, 1040, |
| 1136, 1312, 0, 768, 769, 772, 800, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1024x768@75Hz */ |
| { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048, |
| 1184, 1328, 0, 768, 771, 777, 806, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@70Hz */ |
| { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048, |
| 1184, 1344, 0, 768, 771, 777, 806, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@60Hz */ |
| { DRM_MODE("1024x768i", DRM_MODE_TYPE_DRIVER,44900, 1024, 1032, |
| 1208, 1264, 0, 768, 768, 776, 817, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_INTERLACE) }, /* 1024x768@43Hz */ |
| { DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 57284, 832, 864, |
| 928, 1152, 0, 624, 625, 628, 667, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 832x624@75Hz */ |
| { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816, |
| 896, 1056, 0, 600, 601, 604, 625, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@75Hz */ |
| { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856, |
| 976, 1040, 0, 600, 637, 643, 666, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@72Hz */ |
| { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216, |
| 1344, 1600, 0, 864, 865, 868, 900, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1152x864@75Hz */ |
| }; |
| |
| struct minimode { |
| short w; |
| short h; |
| short r; |
| short rb; |
| }; |
| |
| static const struct minimode est3_modes[] = { |
| /* byte 6 */ |
| { 640, 350, 85, 0 }, |
| { 640, 400, 85, 0 }, |
| { 720, 400, 85, 0 }, |
| { 640, 480, 85, 0 }, |
| { 848, 480, 60, 0 }, |
| { 800, 600, 85, 0 }, |
| { 1024, 768, 85, 0 }, |
| { 1152, 864, 75, 0 }, |
| /* byte 7 */ |
| { 1280, 768, 60, 1 }, |
| { 1280, 768, 60, 0 }, |
| { 1280, 768, 75, 0 }, |
| { 1280, 768, 85, 0 }, |
| { 1280, 960, 60, 0 }, |
| { 1280, 960, 85, 0 }, |
| { 1280, 1024, 60, 0 }, |
| { 1280, 1024, 85, 0 }, |
| /* byte 8 */ |
| { 1360, 768, 60, 0 }, |
| { 1440, 900, 60, 1 }, |
| { 1440, 900, 60, 0 }, |
| { 1440, 900, 75, 0 }, |
| { 1440, 900, 85, 0 }, |
| { 1400, 1050, 60, 1 }, |
| { 1400, 1050, 60, 0 }, |
| { 1400, 1050, 75, 0 }, |
| /* byte 9 */ |
| { 1400, 1050, 85, 0 }, |
| { 1680, 1050, 60, 1 }, |
| { 1680, 1050, 60, 0 }, |
| { 1680, 1050, 75, 0 }, |
| { 1680, 1050, 85, 0 }, |
| { 1600, 1200, 60, 0 }, |
| { 1600, 1200, 65, 0 }, |
| { 1600, 1200, 70, 0 }, |
| /* byte 10 */ |
| { 1600, 1200, 75, 0 }, |
| { 1600, 1200, 85, 0 }, |
| { 1792, 1344, 60, 0 }, |
| { 1792, 1344, 75, 0 }, |
| { 1856, 1392, 60, 0 }, |
| { 1856, 1392, 75, 0 }, |
| { 1920, 1200, 60, 1 }, |
| { 1920, 1200, 60, 0 }, |
| /* byte 11 */ |
| { 1920, 1200, 75, 0 }, |
| { 1920, 1200, 85, 0 }, |
| { 1920, 1440, 60, 0 }, |
| { 1920, 1440, 75, 0 }, |
| }; |
| |
| static const struct minimode extra_modes[] = { |
| { 1024, 576, 60, 0 }, |
| { 1366, 768, 60, 0 }, |
| { 1600, 900, 60, 0 }, |
| { 1680, 945, 60, 0 }, |
| { 1920, 1080, 60, 0 }, |
| { 2048, 1152, 60, 0 }, |
| { 2048, 1536, 60, 0 }, |
| }; |
| |
| /* |
| * From CEA/CTA-861 spec. |
| * |
| * Do not access directly, instead always use cea_mode_for_vic(). |
| */ |
| static const struct drm_display_mode edid_cea_modes_1[] = { |
| /* 1 - 640x480@60Hz 4:3 */ |
| { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656, |
| 752, 800, 0, 480, 490, 492, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 2 - 720x480@60Hz 4:3 */ |
| { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 27000, 720, 736, |
| 798, 858, 0, 480, 489, 495, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 3 - 720x480@60Hz 16:9 */ |
| { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 27000, 720, 736, |
| 798, 858, 0, 480, 489, 495, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 4 - 1280x720@60Hz 16:9 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1390, |
| 1430, 1650, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 5 - 1920x1080i@60Hz 16:9 */ |
| { DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2008, |
| 2052, 2200, 0, 1080, 1084, 1094, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | |
| DRM_MODE_FLAG_INTERLACE), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 6 - 720(1440)x480i@60Hz 4:3 */ |
| { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 13500, 720, 739, |
| 801, 858, 0, 480, 488, 494, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 7 - 720(1440)x480i@60Hz 16:9 */ |
| { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 13500, 720, 739, |
| 801, 858, 0, 480, 488, 494, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 8 - 720(1440)x240@60Hz 4:3 */ |
| { DRM_MODE("720x240", DRM_MODE_TYPE_DRIVER, 13500, 720, 739, |
| 801, 858, 0, 240, 244, 247, 262, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 9 - 720(1440)x240@60Hz 16:9 */ |
| { DRM_MODE("720x240", DRM_MODE_TYPE_DRIVER, 13500, 720, 739, |
| 801, 858, 0, 240, 244, 247, 262, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 10 - 2880x480i@60Hz 4:3 */ |
| { DRM_MODE("2880x480i", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2956, |
| 3204, 3432, 0, 480, 488, 494, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 11 - 2880x480i@60Hz 16:9 */ |
| { DRM_MODE("2880x480i", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2956, |
| 3204, 3432, 0, 480, 488, 494, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 12 - 2880x240@60Hz 4:3 */ |
| { DRM_MODE("2880x240", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2956, |
| 3204, 3432, 0, 240, 244, 247, 262, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 13 - 2880x240@60Hz 16:9 */ |
| { DRM_MODE("2880x240", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2956, |
| 3204, 3432, 0, 240, 244, 247, 262, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 14 - 1440x480@60Hz 4:3 */ |
| { DRM_MODE("1440x480", DRM_MODE_TYPE_DRIVER, 54000, 1440, 1472, |
| 1596, 1716, 0, 480, 489, 495, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 15 - 1440x480@60Hz 16:9 */ |
| { DRM_MODE("1440x480", DRM_MODE_TYPE_DRIVER, 54000, 1440, 1472, |
| 1596, 1716, 0, 480, 489, 495, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 16 - 1920x1080@60Hz 16:9 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2008, |
| 2052, 2200, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 17 - 720x576@50Hz 4:3 */ |
| { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 27000, 720, 732, |
| 796, 864, 0, 576, 581, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 18 - 720x576@50Hz 16:9 */ |
| { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 27000, 720, 732, |
| 796, 864, 0, 576, 581, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 19 - 1280x720@50Hz 16:9 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1720, |
| 1760, 1980, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 20 - 1920x1080i@50Hz 16:9 */ |
| { DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2448, |
| 2492, 2640, 0, 1080, 1084, 1094, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | |
| DRM_MODE_FLAG_INTERLACE), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 21 - 720(1440)x576i@50Hz 4:3 */ |
| { DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 13500, 720, 732, |
| 795, 864, 0, 576, 580, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 22 - 720(1440)x576i@50Hz 16:9 */ |
| { DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 13500, 720, 732, |
| 795, 864, 0, 576, 580, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 23 - 720(1440)x288@50Hz 4:3 */ |
| { DRM_MODE("720x288", DRM_MODE_TYPE_DRIVER, 13500, 720, 732, |
| 795, 864, 0, 288, 290, 293, 312, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 24 - 720(1440)x288@50Hz 16:9 */ |
| { DRM_MODE("720x288", DRM_MODE_TYPE_DRIVER, 13500, 720, 732, |
| 795, 864, 0, 288, 290, 293, 312, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 25 - 2880x576i@50Hz 4:3 */ |
| { DRM_MODE("2880x576i", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2928, |
| 3180, 3456, 0, 576, 580, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 26 - 2880x576i@50Hz 16:9 */ |
| { DRM_MODE("2880x576i", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2928, |
| 3180, 3456, 0, 576, 580, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 27 - 2880x288@50Hz 4:3 */ |
| { DRM_MODE("2880x288", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2928, |
| 3180, 3456, 0, 288, 290, 293, 312, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 28 - 2880x288@50Hz 16:9 */ |
| { DRM_MODE("2880x288", DRM_MODE_TYPE_DRIVER, 54000, 2880, 2928, |
| 3180, 3456, 0, 288, 290, 293, 312, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 29 - 1440x576@50Hz 4:3 */ |
| { DRM_MODE("1440x576", DRM_MODE_TYPE_DRIVER, 54000, 1440, 1464, |
| 1592, 1728, 0, 576, 581, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 30 - 1440x576@50Hz 16:9 */ |
| { DRM_MODE("1440x576", DRM_MODE_TYPE_DRIVER, 54000, 1440, 1464, |
| 1592, 1728, 0, 576, 581, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 31 - 1920x1080@50Hz 16:9 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2448, |
| 2492, 2640, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 32 - 1920x1080@24Hz 16:9 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2558, |
| 2602, 2750, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 33 - 1920x1080@25Hz 16:9 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2448, |
| 2492, 2640, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 34 - 1920x1080@30Hz 16:9 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2008, |
| 2052, 2200, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 35 - 2880x480@60Hz 4:3 */ |
| { DRM_MODE("2880x480", DRM_MODE_TYPE_DRIVER, 108000, 2880, 2944, |
| 3192, 3432, 0, 480, 489, 495, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 36 - 2880x480@60Hz 16:9 */ |
| { DRM_MODE("2880x480", DRM_MODE_TYPE_DRIVER, 108000, 2880, 2944, |
| 3192, 3432, 0, 480, 489, 495, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 37 - 2880x576@50Hz 4:3 */ |
| { DRM_MODE("2880x576", DRM_MODE_TYPE_DRIVER, 108000, 2880, 2928, |
| 3184, 3456, 0, 576, 581, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 38 - 2880x576@50Hz 16:9 */ |
| { DRM_MODE("2880x576", DRM_MODE_TYPE_DRIVER, 108000, 2880, 2928, |
| 3184, 3456, 0, 576, 581, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 39 - 1920x1080i@50Hz 16:9 */ |
| { DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 72000, 1920, 1952, |
| 2120, 2304, 0, 1080, 1126, 1136, 1250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 40 - 1920x1080i@100Hz 16:9 */ |
| { DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2448, |
| 2492, 2640, 0, 1080, 1084, 1094, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | |
| DRM_MODE_FLAG_INTERLACE), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 41 - 1280x720@100Hz 16:9 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1720, |
| 1760, 1980, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 42 - 720x576@100Hz 4:3 */ |
| { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 54000, 720, 732, |
| 796, 864, 0, 576, 581, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 43 - 720x576@100Hz 16:9 */ |
| { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 54000, 720, 732, |
| 796, 864, 0, 576, 581, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 44 - 720(1440)x576i@100Hz 4:3 */ |
| { DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 27000, 720, 732, |
| 795, 864, 0, 576, 580, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 45 - 720(1440)x576i@100Hz 16:9 */ |
| { DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 27000, 720, 732, |
| 795, 864, 0, 576, 580, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 46 - 1920x1080i@120Hz 16:9 */ |
| { DRM_MODE("1920x1080i", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2008, |
| 2052, 2200, 0, 1080, 1084, 1094, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | |
| DRM_MODE_FLAG_INTERLACE), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 47 - 1280x720@120Hz 16:9 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1390, |
| 1430, 1650, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 48 - 720x480@120Hz 4:3 */ |
| { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 54000, 720, 736, |
| 798, 858, 0, 480, 489, 495, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 49 - 720x480@120Hz 16:9 */ |
| { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 54000, 720, 736, |
| 798, 858, 0, 480, 489, 495, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 50 - 720(1440)x480i@120Hz 4:3 */ |
| { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 27000, 720, 739, |
| 801, 858, 0, 480, 488, 494, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 51 - 720(1440)x480i@120Hz 16:9 */ |
| { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 27000, 720, 739, |
| 801, 858, 0, 480, 488, 494, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 52 - 720x576@200Hz 4:3 */ |
| { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 108000, 720, 732, |
| 796, 864, 0, 576, 581, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 53 - 720x576@200Hz 16:9 */ |
| { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 108000, 720, 732, |
| 796, 864, 0, 576, 581, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 54 - 720(1440)x576i@200Hz 4:3 */ |
| { DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 54000, 720, 732, |
| 795, 864, 0, 576, 580, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 55 - 720(1440)x576i@200Hz 16:9 */ |
| { DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 54000, 720, 732, |
| 795, 864, 0, 576, 580, 586, 625, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 56 - 720x480@240Hz 4:3 */ |
| { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 108000, 720, 736, |
| 798, 858, 0, 480, 489, 495, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 57 - 720x480@240Hz 16:9 */ |
| { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 108000, 720, 736, |
| 798, 858, 0, 480, 489, 495, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 58 - 720(1440)x480i@240Hz 4:3 */ |
| { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 54000, 720, 739, |
| 801, 858, 0, 480, 488, 494, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_4_3, }, |
| /* 59 - 720(1440)x480i@240Hz 16:9 */ |
| { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 54000, 720, 739, |
| 801, 858, 0, 480, 488, 494, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC | |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLCLK), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 60 - 1280x720@24Hz 16:9 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 59400, 1280, 3040, |
| 3080, 3300, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 61 - 1280x720@25Hz 16:9 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 3700, |
| 3740, 3960, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 62 - 1280x720@30Hz 16:9 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 3040, |
| 3080, 3300, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 63 - 1920x1080@120Hz 16:9 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2008, |
| 2052, 2200, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 64 - 1920x1080@100Hz 16:9 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2448, |
| 2492, 2640, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 65 - 1280x720@24Hz 64:27 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 59400, 1280, 3040, |
| 3080, 3300, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 66 - 1280x720@25Hz 64:27 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 3700, |
| 3740, 3960, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 67 - 1280x720@30Hz 64:27 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 3040, |
| 3080, 3300, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 68 - 1280x720@50Hz 64:27 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1720, |
| 1760, 1980, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 69 - 1280x720@60Hz 64:27 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74250, 1280, 1390, |
| 1430, 1650, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 70 - 1280x720@100Hz 64:27 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1720, |
| 1760, 1980, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 71 - 1280x720@120Hz 64:27 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 148500, 1280, 1390, |
| 1430, 1650, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 72 - 1920x1080@24Hz 64:27 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2558, |
| 2602, 2750, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 73 - 1920x1080@25Hz 64:27 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2448, |
| 2492, 2640, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 74 - 1920x1080@30Hz 64:27 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 74250, 1920, 2008, |
| 2052, 2200, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 75 - 1920x1080@50Hz 64:27 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2448, |
| 2492, 2640, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 76 - 1920x1080@60Hz 64:27 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2008, |
| 2052, 2200, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 77 - 1920x1080@100Hz 64:27 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2448, |
| 2492, 2640, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 78 - 1920x1080@120Hz 64:27 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 297000, 1920, 2008, |
| 2052, 2200, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 79 - 1680x720@24Hz 64:27 */ |
| { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 59400, 1680, 3040, |
| 3080, 3300, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 80 - 1680x720@25Hz 64:27 */ |
| { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 59400, 1680, 2908, |
| 2948, 3168, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 81 - 1680x720@30Hz 64:27 */ |
| { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 59400, 1680, 2380, |
| 2420, 2640, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 82 - 1680x720@50Hz 64:27 */ |
| { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 82500, 1680, 1940, |
| 1980, 2200, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 83 - 1680x720@60Hz 64:27 */ |
| { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 99000, 1680, 1940, |
| 1980, 2200, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 84 - 1680x720@100Hz 64:27 */ |
| { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 165000, 1680, 1740, |
| 1780, 2000, 0, 720, 725, 730, 825, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 85 - 1680x720@120Hz 64:27 */ |
| { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 198000, 1680, 1740, |
| 1780, 2000, 0, 720, 725, 730, 825, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 86 - 2560x1080@24Hz 64:27 */ |
| { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 99000, 2560, 3558, |
| 3602, 3750, 0, 1080, 1084, 1089, 1100, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 87 - 2560x1080@25Hz 64:27 */ |
| { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 90000, 2560, 3008, |
| 3052, 3200, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 88 - 2560x1080@30Hz 64:27 */ |
| { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 118800, 2560, 3328, |
| 3372, 3520, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 89 - 2560x1080@50Hz 64:27 */ |
| { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 185625, 2560, 3108, |
| 3152, 3300, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 90 - 2560x1080@60Hz 64:27 */ |
| { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 198000, 2560, 2808, |
| 2852, 3000, 0, 1080, 1084, 1089, 1100, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 91 - 2560x1080@100Hz 64:27 */ |
| { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 371250, 2560, 2778, |
| 2822, 2970, 0, 1080, 1084, 1089, 1250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 92 - 2560x1080@120Hz 64:27 */ |
| { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 495000, 2560, 3108, |
| 3152, 3300, 0, 1080, 1084, 1089, 1250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 93 - 3840x2160@24Hz 16:9 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 5116, |
| 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 94 - 3840x2160@25Hz 16:9 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 4896, |
| 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 95 - 3840x2160@30Hz 16:9 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 4016, |
| 4104, 4400, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 96 - 3840x2160@50Hz 16:9 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 594000, 3840, 4896, |
| 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 97 - 3840x2160@60Hz 16:9 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 594000, 3840, 4016, |
| 4104, 4400, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 98 - 4096x2160@24Hz 256:135 */ |
| { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 297000, 4096, 5116, |
| 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, |
| /* 99 - 4096x2160@25Hz 256:135 */ |
| { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 297000, 4096, 5064, |
| 5152, 5280, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, |
| /* 100 - 4096x2160@30Hz 256:135 */ |
| { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 297000, 4096, 4184, |
| 4272, 4400, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, |
| /* 101 - 4096x2160@50Hz 256:135 */ |
| { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 594000, 4096, 5064, |
| 5152, 5280, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, |
| /* 102 - 4096x2160@60Hz 256:135 */ |
| { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 594000, 4096, 4184, |
| 4272, 4400, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, |
| /* 103 - 3840x2160@24Hz 64:27 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 5116, |
| 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 104 - 3840x2160@25Hz 64:27 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 4896, |
| 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 105 - 3840x2160@30Hz 64:27 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, 3840, 4016, |
| 4104, 4400, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 106 - 3840x2160@50Hz 64:27 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 594000, 3840, 4896, |
| 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 107 - 3840x2160@60Hz 64:27 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 594000, 3840, 4016, |
| 4104, 4400, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 108 - 1280x720@48Hz 16:9 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 90000, 1280, 2240, |
| 2280, 2500, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 109 - 1280x720@48Hz 64:27 */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 90000, 1280, 2240, |
| 2280, 2500, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 110 - 1680x720@48Hz 64:27 */ |
| { DRM_MODE("1680x720", DRM_MODE_TYPE_DRIVER, 99000, 1680, 2490, |
| 2530, 2750, 0, 720, 725, 730, 750, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 111 - 1920x1080@48Hz 16:9 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2558, |
| 2602, 2750, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 112 - 1920x1080@48Hz 64:27 */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 148500, 1920, 2558, |
| 2602, 2750, 0, 1080, 1084, 1089, 1125, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 113 - 2560x1080@48Hz 64:27 */ |
| { DRM_MODE("2560x1080", DRM_MODE_TYPE_DRIVER, 198000, 2560, 3558, |
| 3602, 3750, 0, 1080, 1084, 1089, 1100, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 114 - 3840x2160@48Hz 16:9 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 594000, 3840, 5116, |
| 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 115 - 4096x2160@48Hz 256:135 */ |
| { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 594000, 4096, 5116, |
| 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, |
| /* 116 - 3840x2160@48Hz 64:27 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 594000, 3840, 5116, |
| 5204, 5500, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 117 - 3840x2160@100Hz 16:9 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 1188000, 3840, 4896, |
| 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 118 - 3840x2160@120Hz 16:9 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 1188000, 3840, 4016, |
| 4104, 4400, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 119 - 3840x2160@100Hz 64:27 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 1188000, 3840, 4896, |
| 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 120 - 3840x2160@120Hz 64:27 */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 1188000, 3840, 4016, |
| 4104, 4400, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 121 - 5120x2160@24Hz 64:27 */ |
| { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 396000, 5120, 7116, |
| 7204, 7500, 0, 2160, 2168, 2178, 2200, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 122 - 5120x2160@25Hz 64:27 */ |
| { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 396000, 5120, 6816, |
| 6904, 7200, 0, 2160, 2168, 2178, 2200, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 123 - 5120x2160@30Hz 64:27 */ |
| { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 396000, 5120, 5784, |
| 5872, 6000, 0, 2160, 2168, 2178, 2200, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 124 - 5120x2160@48Hz 64:27 */ |
| { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 742500, 5120, 5866, |
| 5954, 6250, 0, 2160, 2168, 2178, 2475, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 125 - 5120x2160@50Hz 64:27 */ |
| { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 742500, 5120, 6216, |
| 6304, 6600, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 126 - 5120x2160@60Hz 64:27 */ |
| { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 742500, 5120, 5284, |
| 5372, 5500, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 127 - 5120x2160@100Hz 64:27 */ |
| { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 1485000, 5120, 6216, |
| 6304, 6600, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| }; |
| |
| /* |
| * From CEA/CTA-861 spec. |
| * |
| * Do not access directly, instead always use cea_mode_for_vic(). |
| */ |
| static const struct drm_display_mode edid_cea_modes_193[] = { |
| /* 193 - 5120x2160@120Hz 64:27 */ |
| { DRM_MODE("5120x2160", DRM_MODE_TYPE_DRIVER, 1485000, 5120, 5284, |
| 5372, 5500, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 194 - 7680x4320@24Hz 16:9 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 1188000, 7680, 10232, |
| 10408, 11000, 0, 4320, 4336, 4356, 4500, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 195 - 7680x4320@25Hz 16:9 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 1188000, 7680, 10032, |
| 10208, 10800, 0, 4320, 4336, 4356, 4400, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 196 - 7680x4320@30Hz 16:9 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 1188000, 7680, 8232, |
| 8408, 9000, 0, 4320, 4336, 4356, 4400, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 197 - 7680x4320@48Hz 16:9 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 2376000, 7680, 10232, |
| 10408, 11000, 0, 4320, 4336, 4356, 4500, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 198 - 7680x4320@50Hz 16:9 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 2376000, 7680, 10032, |
| 10208, 10800, 0, 4320, 4336, 4356, 4400, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 199 - 7680x4320@60Hz 16:9 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 2376000, 7680, 8232, |
| 8408, 9000, 0, 4320, 4336, 4356, 4400, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 200 - 7680x4320@100Hz 16:9 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 4752000, 7680, 9792, |
| 9968, 10560, 0, 4320, 4336, 4356, 4500, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 201 - 7680x4320@120Hz 16:9 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 4752000, 7680, 8032, |
| 8208, 8800, 0, 4320, 4336, 4356, 4500, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 202 - 7680x4320@24Hz 64:27 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 1188000, 7680, 10232, |
| 10408, 11000, 0, 4320, 4336, 4356, 4500, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 203 - 7680x4320@25Hz 64:27 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 1188000, 7680, 10032, |
| 10208, 10800, 0, 4320, 4336, 4356, 4400, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 204 - 7680x4320@30Hz 64:27 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 1188000, 7680, 8232, |
| 8408, 9000, 0, 4320, 4336, 4356, 4400, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 205 - 7680x4320@48Hz 64:27 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 2376000, 7680, 10232, |
| 10408, 11000, 0, 4320, 4336, 4356, 4500, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 206 - 7680x4320@50Hz 64:27 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 2376000, 7680, 10032, |
| 10208, 10800, 0, 4320, 4336, 4356, 4400, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 207 - 7680x4320@60Hz 64:27 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 2376000, 7680, 8232, |
| 8408, 9000, 0, 4320, 4336, 4356, 4400, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 208 - 7680x4320@100Hz 64:27 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 4752000, 7680, 9792, |
| 9968, 10560, 0, 4320, 4336, 4356, 4500, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 209 - 7680x4320@120Hz 64:27 */ |
| { DRM_MODE("7680x4320", DRM_MODE_TYPE_DRIVER, 4752000, 7680, 8032, |
| 8208, 8800, 0, 4320, 4336, 4356, 4500, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 210 - 10240x4320@24Hz 64:27 */ |
| { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 1485000, 10240, 11732, |
| 11908, 12500, 0, 4320, 4336, 4356, 4950, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 211 - 10240x4320@25Hz 64:27 */ |
| { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 1485000, 10240, 12732, |
| 12908, 13500, 0, 4320, 4336, 4356, 4400, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 212 - 10240x4320@30Hz 64:27 */ |
| { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 1485000, 10240, 10528, |
| 10704, 11000, 0, 4320, 4336, 4356, 4500, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 213 - 10240x4320@48Hz 64:27 */ |
| { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 2970000, 10240, 11732, |
| 11908, 12500, 0, 4320, 4336, 4356, 4950, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 214 - 10240x4320@50Hz 64:27 */ |
| { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 2970000, 10240, 12732, |
| 12908, 13500, 0, 4320, 4336, 4356, 4400, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 215 - 10240x4320@60Hz 64:27 */ |
| { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 2970000, 10240, 10528, |
| 10704, 11000, 0, 4320, 4336, 4356, 4500, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 216 - 10240x4320@100Hz 64:27 */ |
| { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 5940000, 10240, 12432, |
| 12608, 13200, 0, 4320, 4336, 4356, 4500, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 217 - 10240x4320@120Hz 64:27 */ |
| { DRM_MODE("10240x4320", DRM_MODE_TYPE_DRIVER, 5940000, 10240, 10528, |
| 10704, 11000, 0, 4320, 4336, 4356, 4500, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_64_27, }, |
| /* 218 - 4096x2160@100Hz 256:135 */ |
| { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 1188000, 4096, 4896, |
| 4984, 5280, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, |
| /* 219 - 4096x2160@120Hz 256:135 */ |
| { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 1188000, 4096, 4184, |
| 4272, 4400, 0, 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, |
| }; |
| |
| /* |
| * HDMI 1.4 4k modes. Index using the VIC. |
| */ |
| static const struct drm_display_mode edid_4k_modes[] = { |
| /* 0 - dummy, VICs start at 1 */ |
| { }, |
| /* 1 - 3840x2160@30Hz */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, |
| 3840, 4016, 4104, 4400, 0, |
| 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 2 - 3840x2160@25Hz */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, |
| 3840, 4896, 4984, 5280, 0, |
| 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 3 - 3840x2160@24Hz */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000, |
| 3840, 5116, 5204, 5500, 0, |
| 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, |
| /* 4 - 4096x2160@24Hz (SMPTE) */ |
| { DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 297000, |
| 4096, 5116, 5204, 5500, 0, |
| 2160, 2168, 2178, 2250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC), |
| .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, }, |
| }; |
| |
| /*** DDC fetch and block validation ***/ |
| |
| /* |
| * The opaque EDID type, internal to drm_edid.c. |
| */ |
| struct drm_edid { |
| /* Size allocated for edid */ |
| size_t size; |
| const struct edid *edid; |
| }; |
| |
| static int edid_hfeeodb_extension_block_count(const struct edid *edid); |
| |
| static int edid_hfeeodb_block_count(const struct edid *edid) |
| { |
| int eeodb = edid_hfeeodb_extension_block_count(edid); |
| |
| return eeodb ? eeodb + 1 : 0; |
| } |
| |
| static int edid_extension_block_count(const struct edid *edid) |
| { |
| return edid->extensions; |
| } |
| |
| static int edid_block_count(const struct edid *edid) |
| { |
| return edid_extension_block_count(edid) + 1; |
| } |
| |
| static int edid_size_by_blocks(int num_blocks) |
| { |
| return num_blocks * EDID_LENGTH; |
| } |
| |
| static int edid_size(const struct edid *edid) |
| { |
| return edid_size_by_blocks(edid_block_count(edid)); |
| } |
| |
| static const void *edid_block_data(const struct edid *edid, int index) |
| { |
| BUILD_BUG_ON(sizeof(*edid) != EDID_LENGTH); |
| |
| return edid + index; |
| } |
| |
| static const void *edid_extension_block_data(const struct edid *edid, int index) |
| { |
| return edid_block_data(edid, index + 1); |
| } |
| |
| /* EDID block count indicated in EDID, may exceed allocated size */ |
| static int __drm_edid_block_count(const struct drm_edid *drm_edid) |
| { |
| int num_blocks; |
| |
| /* Starting point */ |
| num_blocks = edid_block_count(drm_edid->edid); |
| |
| /* HF-EEODB override */ |
| if (drm_edid->size >= edid_size_by_blocks(2)) { |
| int eeodb; |
| |
| /* |
| * Note: HF-EEODB may specify a smaller extension count than the |
| * regular one. Unlike in buffer allocation, here we can use it. |
| */ |
| eeodb = edid_hfeeodb_block_count(drm_edid->edid); |
| if (eeodb) |
| num_blocks = eeodb; |
| } |
| |
| return num_blocks; |
| } |
| |
| /* EDID block count, limited by allocated size */ |
| static int drm_edid_block_count(const struct drm_edid *drm_edid) |
| { |
| /* Limit by allocated size */ |
| return min(__drm_edid_block_count(drm_edid), |
| (int)drm_edid->size / EDID_LENGTH); |
| } |
| |
| /* EDID extension block count, limited by allocated size */ |
| static int drm_edid_extension_block_count(const struct drm_edid *drm_edid) |
| { |
| return drm_edid_block_count(drm_edid) - 1; |
| } |
| |
| static const void *drm_edid_block_data(const struct drm_edid *drm_edid, int index) |
| { |
| return edid_block_data(drm_edid->edid, index); |
| } |
| |
| static const void *drm_edid_extension_block_data(const struct drm_edid *drm_edid, |
| int index) |
| { |
| return edid_extension_block_data(drm_edid->edid, index); |
| } |
| |
| /* |
| * Initializer helper for legacy interfaces, where we have no choice but to |
| * trust edid size. Not for general purpose use. |
| */ |
| static const struct drm_edid *drm_edid_legacy_init(struct drm_edid *drm_edid, |
| const struct edid *edid) |
| { |
| if (!edid) |
| return NULL; |
| |
| memset(drm_edid, 0, sizeof(*drm_edid)); |
| |
| drm_edid->edid = edid; |
| drm_edid->size = edid_size(edid); |
| |
| return drm_edid; |
| } |
| |
| /* |
| * EDID base and extension block iterator. |
| * |
| * struct drm_edid_iter iter; |
| * const u8 *block; |
| * |
| * drm_edid_iter_begin(drm_edid, &iter); |
| * drm_edid_iter_for_each(block, &iter) { |
| * // do stuff with block |
| * } |
| * drm_edid_iter_end(&iter); |
| */ |
| struct drm_edid_iter { |
| const struct drm_edid *drm_edid; |
| |
| /* Current block index. */ |
| int index; |
| }; |
| |
| static void drm_edid_iter_begin(const struct drm_edid *drm_edid, |
| struct drm_edid_iter *iter) |
| { |
| memset(iter, 0, sizeof(*iter)); |
| |
| iter->drm_edid = drm_edid; |
| } |
| |
| static const void *__drm_edid_iter_next(struct drm_edid_iter *iter) |
| { |
| const void *block = NULL; |
| |
| if (!iter->drm_edid) |
| return NULL; |
| |
| if (iter->index < drm_edid_block_count(iter->drm_edid)) |
| block = drm_edid_block_data(iter->drm_edid, iter->index++); |
| |
| return block; |
| } |
| |
| #define drm_edid_iter_for_each(__block, __iter) \ |
| while (((__block) = __drm_edid_iter_next(__iter))) |
| |
| static void drm_edid_iter_end(struct drm_edid_iter *iter) |
| { |
| memset(iter, 0, sizeof(*iter)); |
| } |
| |
| static const u8 edid_header[] = { |
| 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 |
| }; |
| |
| static void edid_header_fix(void *edid) |
| { |
| memcpy(edid, edid_header, sizeof(edid_header)); |
| } |
| |
| /** |
| * drm_edid_header_is_valid - sanity check the header of the base EDID block |
| * @_edid: pointer to raw base EDID block |
| * |
| * Sanity check the header of the base EDID block. |
| * |
| * Return: 8 if the header is perfect, down to 0 if it's totally wrong. |
| */ |
| int drm_edid_header_is_valid(const void *_edid) |
| { |
| const struct edid *edid = _edid; |
| int i, score = 0; |
| |
| for (i = 0; i < sizeof(edid_header); i++) { |
| if (edid->header[i] == edid_header[i]) |
| score++; |
| } |
| |
| return score; |
| } |
| EXPORT_SYMBOL(drm_edid_header_is_valid); |
| |
| static int edid_fixup __read_mostly = 6; |
| module_param_named(edid_fixup, edid_fixup, int, 0400); |
| MODULE_PARM_DESC(edid_fixup, |
| "Minimum number of valid EDID header bytes (0-8, default 6)"); |
| |
| static int edid_block_compute_checksum(const void *_block) |
| { |
| const u8 *block = _block; |
| int i; |
| u8 csum = 0, crc = 0; |
| |
| for (i = 0; i < EDID_LENGTH - 1; i++) |
| csum += block[i]; |
| |
| crc = 0x100 - csum; |
| |
| return crc; |
| } |
| |
| static int edid_block_get_checksum(const void *_block) |
| { |
| const struct edid *block = _block; |
| |
| return block->checksum; |
| } |
| |
| static int edid_block_tag(const void *_block) |
| { |
| const u8 *block = _block; |
| |
| return block[0]; |
| } |
| |
| static bool edid_block_is_zero(const void *edid) |
| { |
| return !memchr_inv(edid, 0, EDID_LENGTH); |
| } |
| |
| /** |
| * drm_edid_are_equal - compare two edid blobs. |
| * @edid1: pointer to first blob |
| * @edid2: pointer to second blob |
| * This helper can be used during probing to determine if |
| * edid had changed. |
| */ |
| bool drm_edid_are_equal(const struct edid *edid1, const struct edid *edid2) |
| { |
| int edid1_len, edid2_len; |
| bool edid1_present = edid1 != NULL; |
| bool edid2_present = edid2 != NULL; |
| |
| if (edid1_present != edid2_present) |
| return false; |
| |
| if (edid1) { |
| edid1_len = edid_size(edid1); |
| edid2_len = edid_size(edid2); |
| |
| if (edid1_len != edid2_len) |
| return false; |
| |
| if (memcmp(edid1, edid2, edid1_len)) |
| return false; |
| } |
| |
| return true; |
| } |
| EXPORT_SYMBOL(drm_edid_are_equal); |
| |
| enum edid_block_status { |
| EDID_BLOCK_OK = 0, |
| EDID_BLOCK_READ_FAIL, |
| EDID_BLOCK_NULL, |
| EDID_BLOCK_ZERO, |
| EDID_BLOCK_HEADER_CORRUPT, |
| EDID_BLOCK_HEADER_REPAIR, |
| EDID_BLOCK_HEADER_FIXED, |
| EDID_BLOCK_CHECKSUM, |
| EDID_BLOCK_VERSION, |
| }; |
| |
| static enum edid_block_status edid_block_check(const void *_block, |
| bool is_base_block) |
| { |
| const struct edid *block = _block; |
| |
| if (!block) |
| return EDID_BLOCK_NULL; |
| |
| if (is_base_block) { |
| int score = drm_edid_header_is_valid(block); |
| |
| if (score < clamp(edid_fixup, 0, 8)) { |
| if (edid_block_is_zero(block)) |
| return EDID_BLOCK_ZERO; |
| else |
| return EDID_BLOCK_HEADER_CORRUPT; |
| } |
| |
| if (score < 8) |
| return EDID_BLOCK_HEADER_REPAIR; |
| } |
| |
| if (edid_block_compute_checksum(block) != edid_block_get_checksum(block)) { |
| if (edid_block_is_zero(block)) |
| return EDID_BLOCK_ZERO; |
| else |
| return EDID_BLOCK_CHECKSUM; |
| } |
| |
| if (is_base_block) { |
| if (block->version != 1) |
| return EDID_BLOCK_VERSION; |
| } |
| |
| return EDID_BLOCK_OK; |
| } |
| |
| static bool edid_block_status_valid(enum edid_block_status status, int tag) |
| { |
| return status == EDID_BLOCK_OK || |
| status == EDID_BLOCK_HEADER_FIXED || |
| (status == EDID_BLOCK_CHECKSUM && tag == CEA_EXT); |
| } |
| |
| static bool edid_block_valid(const void *block, bool base) |
| { |
| return edid_block_status_valid(edid_block_check(block, base), |
| edid_block_tag(block)); |
| } |
| |
| static void edid_block_status_print(enum edid_block_status status, |
| const struct edid *block, |
| int block_num) |
| { |
| switch (status) { |
| case EDID_BLOCK_OK: |
| break; |
| case EDID_BLOCK_READ_FAIL: |
| pr_debug("EDID block %d read failed\n", block_num); |
| break; |
| case EDID_BLOCK_NULL: |
| pr_debug("EDID block %d pointer is NULL\n", block_num); |
| break; |
| case EDID_BLOCK_ZERO: |
| pr_notice("EDID block %d is all zeroes\n", block_num); |
| break; |
| case EDID_BLOCK_HEADER_CORRUPT: |
| pr_notice("EDID has corrupt header\n"); |
| break; |
| case EDID_BLOCK_HEADER_REPAIR: |
| pr_debug("EDID corrupt header needs repair\n"); |
| break; |
| case EDID_BLOCK_HEADER_FIXED: |
| pr_debug("EDID corrupt header fixed\n"); |
| break; |
| case EDID_BLOCK_CHECKSUM: |
| if (edid_block_status_valid(status, edid_block_tag(block))) { |
| pr_debug("EDID block %d (tag 0x%02x) checksum is invalid, remainder is %d, ignoring\n", |
| block_num, edid_block_tag(block), |
| edid_block_compute_checksum(block)); |
| } else { |
| pr_notice("EDID block %d (tag 0x%02x) checksum is invalid, remainder is %d\n", |
| block_num, edid_block_tag(block), |
| edid_block_compute_checksum(block)); |
| } |
| break; |
| case EDID_BLOCK_VERSION: |
| pr_notice("EDID has major version %d, instead of 1\n", |
| block->version); |
| break; |
| default: |
| WARN(1, "EDID block %d unknown edid block status code %d\n", |
| block_num, status); |
| break; |
| } |
| } |
| |
| static void edid_block_dump(const char *level, const void *block, int block_num) |
| { |
| enum edid_block_status status; |
| char prefix[20]; |
| |
| status = edid_block_check(block, block_num == 0); |
| if (status == EDID_BLOCK_ZERO) |
| sprintf(prefix, "\t[%02x] ZERO ", block_num); |
| else if (!edid_block_status_valid(status, edid_block_tag(block))) |
| sprintf(prefix, "\t[%02x] BAD ", block_num); |
| else |
| sprintf(prefix, "\t[%02x] GOOD ", block_num); |
| |
| print_hex_dump(level, prefix, DUMP_PREFIX_NONE, 16, 1, |
| block, EDID_LENGTH, false); |
| } |
| |
| /** |
| * drm_edid_block_valid - Sanity check the EDID block (base or extension) |
| * @_block: pointer to raw EDID block |
| * @block_num: type of block to validate (0 for base, extension otherwise) |
| * @print_bad_edid: if true, dump bad EDID blocks to the console |
| * @edid_corrupt: if true, the header or checksum is invalid |
| * |
| * Validate a base or extension EDID block and optionally dump bad blocks to |
| * the console. |
| * |
| * Return: True if the block is valid, false otherwise. |
| */ |
| bool drm_edid_block_valid(u8 *_block, int block_num, bool print_bad_edid, |
| bool *edid_corrupt) |
| { |
| struct edid *block = (struct edid *)_block; |
| enum edid_block_status status; |
| bool is_base_block = block_num == 0; |
| bool valid; |
| |
| if (WARN_ON(!block)) |
| return false; |
| |
| status = edid_block_check(block, is_base_block); |
| if (status == EDID_BLOCK_HEADER_REPAIR) { |
| DRM_DEBUG_KMS("Fixing EDID header, your hardware may be failing\n"); |
| edid_header_fix(block); |
| |
| /* Retry with fixed header, update status if that worked. */ |
| status = edid_block_check(block, is_base_block); |
| if (status == EDID_BLOCK_OK) |
| status = EDID_BLOCK_HEADER_FIXED; |
| } |
| |
| if (edid_corrupt) { |
| /* |
| * Unknown major version isn't corrupt but we can't use it. Only |
| * the base block can reset edid_corrupt to false. |
| */ |
| if (is_base_block && |
| (status == EDID_BLOCK_OK || status == EDID_BLOCK_VERSION)) |
| *edid_corrupt = false; |
| else if (status != EDID_BLOCK_OK) |
| *edid_corrupt = true; |
| } |
| |
| edid_block_status_print(status, block, block_num); |
| |
| /* Determine whether we can use this block with this status. */ |
| valid = edid_block_status_valid(status, edid_block_tag(block)); |
| |
| if (!valid && print_bad_edid && status != EDID_BLOCK_ZERO) { |
| pr_notice("Raw EDID:\n"); |
| edid_block_dump(KERN_NOTICE, block, block_num); |
| } |
| |
| return valid; |
| } |
| EXPORT_SYMBOL(drm_edid_block_valid); |
| |
| /** |
| * drm_edid_is_valid - sanity check EDID data |
| * @edid: EDID data |
| * |
| * Sanity-check an entire EDID record (including extensions) |
| * |
| * Return: True if the EDID data is valid, false otherwise. |
| */ |
| bool drm_edid_is_valid(struct edid *edid) |
| { |
| int i; |
| |
| if (!edid) |
| return false; |
| |
| for (i = 0; i < edid_block_count(edid); i++) { |
| void *block = (void *)edid_block_data(edid, i); |
| |
| if (!drm_edid_block_valid(block, i, true, NULL)) |
| return false; |
| } |
| |
| return true; |
| } |
| EXPORT_SYMBOL(drm_edid_is_valid); |
| |
| /** |
| * drm_edid_valid - sanity check EDID data |
| * @drm_edid: EDID data |
| * |
| * Sanity check an EDID. Cross check block count against allocated size and |
| * checksum the blocks. |
| * |
| * Return: True if the EDID data is valid, false otherwise. |
| */ |
| bool drm_edid_valid(const struct drm_edid *drm_edid) |
| { |
| int i; |
| |
| if (!drm_edid) |
| return false; |
| |
| if (edid_size_by_blocks(__drm_edid_block_count(drm_edid)) != drm_edid->size) |
| return false; |
| |
| for (i = 0; i < drm_edid_block_count(drm_edid); i++) { |
| const void *block = drm_edid_block_data(drm_edid, i); |
| |
| if (!edid_block_valid(block, i == 0)) |
| return false; |
| } |
| |
| return true; |
| } |
| EXPORT_SYMBOL(drm_edid_valid); |
| |
| static struct edid *edid_filter_invalid_blocks(struct edid *edid, |
| size_t *alloc_size) |
| { |
| struct edid *new; |
| int i, valid_blocks = 0; |
| |
| /* |
| * Note: If the EDID uses HF-EEODB, but has invalid blocks, we'll revert |
| * back to regular extension count here. We don't want to start |
| * modifying the HF-EEODB extension too. |
| */ |
| for (i = 0; i < edid_block_count(edid); i++) { |
| const void *src_block = edid_block_data(edid, i); |
| |
| if (edid_block_valid(src_block, i == 0)) { |
| void *dst_block = (void *)edid_block_data(edid, valid_blocks); |
| |
| memmove(dst_block, src_block, EDID_LENGTH); |
| valid_blocks++; |
| } |
| } |
| |
| /* We already trusted the base block to be valid here... */ |
| if (WARN_ON(!valid_blocks)) { |
| kfree(edid); |
| return NULL; |
| } |
| |
| edid->extensions = valid_blocks - 1; |
| edid->checksum = edid_block_compute_checksum(edid); |
| |
| *alloc_size = edid_size_by_blocks(valid_blocks); |
| |
| new = krealloc(edid, *alloc_size, GFP_KERNEL); |
| if (!new) |
| kfree(edid); |
| |
| return new; |
| } |
| |
| #define DDC_SEGMENT_ADDR 0x30 |
| /** |
| * drm_do_probe_ddc_edid() - get EDID information via I2C |
| * @data: I2C device adapter |
| * @buf: EDID data buffer to be filled |
| * @block: 128 byte EDID block to start fetching from |
| * @len: EDID data buffer length to fetch |
| * |
| * Try to fetch EDID information by calling I2C driver functions. |
| * |
| * Return: 0 on success or -1 on failure. |
| */ |
| static int |
| drm_do_probe_ddc_edid(void *data, u8 *buf, unsigned int block, size_t len) |
| { |
| struct i2c_adapter *adapter = data; |
| unsigned char start = block * EDID_LENGTH; |
| unsigned char segment = block >> 1; |
| unsigned char xfers = segment ? 3 : 2; |
| int ret, retries = 5; |
| |
| /* |
| * The core I2C driver will automatically retry the transfer if the |
| * adapter reports EAGAIN. However, we find that bit-banging transfers |
| * are susceptible to errors under a heavily loaded machine and |
| * generate spurious NAKs and timeouts. Retrying the transfer |
| * of the individual block a few times seems to overcome this. |
| */ |
| do { |
| struct i2c_msg msgs[] = { |
| { |
| .addr = DDC_SEGMENT_ADDR, |
| .flags = 0, |
| .len = 1, |
| .buf = &segment, |
| }, { |
| .addr = DDC_ADDR, |
| .flags = 0, |
| .len = 1, |
| .buf = &start, |
| }, { |
| .addr = DDC_ADDR, |
| .flags = I2C_M_RD, |
| .len = len, |
| .buf = buf, |
| } |
| }; |
| |
| /* |
| * Avoid sending the segment addr to not upset non-compliant |
| * DDC monitors. |
| */ |
| ret = i2c_transfer(adapter, &msgs[3 - xfers], xfers); |
| |
| if (ret == -ENXIO) { |
| DRM_DEBUG_KMS("drm: skipping non-existent adapter %s\n", |
| adapter->name); |
| break; |
| } |
| } while (ret != xfers && --retries); |
| |
| return ret == xfers ? 0 : -1; |
| } |
| |
| static void connector_bad_edid(struct drm_connector *connector, |
| const struct edid *edid, int num_blocks) |
| { |
| int i; |
| u8 last_block; |
| |
| /* |
| * 0x7e in the EDID is the number of extension blocks. The EDID |
| * is 1 (base block) + num_ext_blocks big. That means we can think |
| * of 0x7e in the EDID of the _index_ of the last block in the |
| * combined chunk of memory. |
| */ |
| last_block = edid->extensions; |
| |
| /* Calculate real checksum for the last edid extension block data */ |
| if (last_block < num_blocks) |
| connector->real_edid_checksum = |
| edid_block_compute_checksum(edid + last_block); |
| |
| if (connector->bad_edid_counter++ && !drm_debug_enabled(DRM_UT_KMS)) |
| return; |
| |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] EDID is invalid:\n", |
| connector->base.id, connector->name); |
| for (i = 0; i < num_blocks; i++) |
| edid_block_dump(KERN_DEBUG, edid + i, i); |
| } |
| |
| /* Get override or firmware EDID */ |
| static const struct drm_edid *drm_edid_override_get(struct drm_connector *connector) |
| { |
| const struct drm_edid *override = NULL; |
| |
| mutex_lock(&connector->edid_override_mutex); |
| |
| if (connector->edid_override) |
| override = drm_edid_dup(connector->edid_override); |
| |
| mutex_unlock(&connector->edid_override_mutex); |
| |
| if (!override) |
| override = drm_edid_load_firmware(connector); |
| |
| return IS_ERR(override) ? NULL : override; |
| } |
| |
| /* For debugfs edid_override implementation */ |
| int drm_edid_override_show(struct drm_connector *connector, struct seq_file *m) |
| { |
| const struct drm_edid *drm_edid; |
| |
| mutex_lock(&connector->edid_override_mutex); |
| |
| drm_edid = connector->edid_override; |
| if (drm_edid) |
| seq_write(m, drm_edid->edid, drm_edid->size); |
| |
| mutex_unlock(&connector->edid_override_mutex); |
| |
| return 0; |
| } |
| |
| /* For debugfs edid_override implementation */ |
| int drm_edid_override_set(struct drm_connector *connector, const void *edid, |
| size_t size) |
| { |
| const struct drm_edid *drm_edid; |
| |
| drm_edid = drm_edid_alloc(edid, size); |
| if (!drm_edid_valid(drm_edid)) { |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] EDID override invalid\n", |
| connector->base.id, connector->name); |
| drm_edid_free(drm_edid); |
| return -EINVAL; |
| } |
| |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] EDID override set\n", |
| connector->base.id, connector->name); |
| |
| mutex_lock(&connector->edid_override_mutex); |
| |
| drm_edid_free(connector->edid_override); |
| connector->edid_override = drm_edid; |
| |
| mutex_unlock(&connector->edid_override_mutex); |
| |
| return 0; |
| } |
| |
| /* For debugfs edid_override implementation */ |
| int drm_edid_override_reset(struct drm_connector *connector) |
| { |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] EDID override reset\n", |
| connector->base.id, connector->name); |
| |
| mutex_lock(&connector->edid_override_mutex); |
| |
| drm_edid_free(connector->edid_override); |
| connector->edid_override = NULL; |
| |
| mutex_unlock(&connector->edid_override_mutex); |
| |
| return 0; |
| } |
| |
| /** |
| * drm_edid_override_connector_update - add modes from override/firmware EDID |
| * @connector: connector we're probing |
| * |
| * Add modes from the override/firmware EDID, if available. Only to be used from |
| * drm_helper_probe_single_connector_modes() as a fallback for when DDC probe |
| * failed during drm_get_edid() and caused the override/firmware EDID to be |
| * skipped. |
| * |
| * Return: The number of modes added or 0 if we couldn't find any. |
| */ |
| int drm_edid_override_connector_update(struct drm_connector *connector) |
| { |
| const struct drm_edid *override; |
| int num_modes = 0; |
| |
| override = drm_edid_override_get(connector); |
| if (override) { |
| num_modes = drm_edid_connector_update(connector, override); |
| |
| drm_edid_free(override); |
| |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] adding %d modes via fallback override/firmware EDID\n", |
| connector->base.id, connector->name, num_modes); |
| } |
| |
| return num_modes; |
| } |
| EXPORT_SYMBOL(drm_edid_override_connector_update); |
| |
| typedef int read_block_fn(void *context, u8 *buf, unsigned int block, size_t len); |
| |
| static enum edid_block_status edid_block_read(void *block, unsigned int block_num, |
| read_block_fn read_block, |
| void *context) |
| { |
| enum edid_block_status status; |
| bool is_base_block = block_num == 0; |
| int try; |
| |
| for (try = 0; try < 4; try++) { |
| if (read_block(context, block, block_num, EDID_LENGTH)) |
| return EDID_BLOCK_READ_FAIL; |
| |
| status = edid_block_check(block, is_base_block); |
| if (status == EDID_BLOCK_HEADER_REPAIR) { |
| edid_header_fix(block); |
| |
| /* Retry with fixed header, update status if that worked. */ |
| status = edid_block_check(block, is_base_block); |
| if (status == EDID_BLOCK_OK) |
| status = EDID_BLOCK_HEADER_FIXED; |
| } |
| |
| if (edid_block_status_valid(status, edid_block_tag(block))) |
| break; |
| |
| /* Fail early for unrepairable base block all zeros. */ |
| if (try == 0 && is_base_block && status == EDID_BLOCK_ZERO) |
| break; |
| } |
| |
| return status; |
| } |
| |
| static struct edid *_drm_do_get_edid(struct drm_connector *connector, |
| read_block_fn read_block, void *context, |
| size_t *size) |
| { |
| enum edid_block_status status; |
| int i, num_blocks, invalid_blocks = 0; |
| const struct drm_edid *override; |
| struct edid *edid, *new; |
| size_t alloc_size = EDID_LENGTH; |
| |
| override = drm_edid_override_get(connector); |
| if (override) { |
| alloc_size = override->size; |
| edid = kmemdup(override->edid, alloc_size, GFP_KERNEL); |
| drm_edid_free(override); |
| if (!edid) |
| return NULL; |
| goto ok; |
| } |
| |
| edid = kmalloc(alloc_size, GFP_KERNEL); |
| if (!edid) |
| return NULL; |
| |
| status = edid_block_read(edid, 0, read_block, context); |
| |
| edid_block_status_print(status, edid, 0); |
| |
| if (status == EDID_BLOCK_READ_FAIL) |
| goto fail; |
| |
| /* FIXME: Clarify what a corrupt EDID actually means. */ |
| if (status == EDID_BLOCK_OK || status == EDID_BLOCK_VERSION) |
| connector->edid_corrupt = false; |
| else |
| connector->edid_corrupt = true; |
| |
| if (!edid_block_status_valid(status, edid_block_tag(edid))) { |
| if (status == EDID_BLOCK_ZERO) |
| connector->null_edid_counter++; |
| |
| connector_bad_edid(connector, edid, 1); |
| goto fail; |
| } |
| |
| if (!edid_extension_block_count(edid)) |
| goto ok; |
| |
| alloc_size = edid_size(edid); |
| new = krealloc(edid, alloc_size, GFP_KERNEL); |
| if (!new) |
| goto fail; |
| edid = new; |
| |
| num_blocks = edid_block_count(edid); |
| for (i = 1; i < num_blocks; i++) { |
| void *block = (void *)edid_block_data(edid, i); |
| |
| status = edid_block_read(block, i, read_block, context); |
| |
| edid_block_status_print(status, block, i); |
| |
| if (!edid_block_status_valid(status, edid_block_tag(block))) { |
| if (status == EDID_BLOCK_READ_FAIL) |
| goto fail; |
| invalid_blocks++; |
| } else if (i == 1) { |
| /* |
| * If the first EDID extension is a CTA extension, and |
| * the first Data Block is HF-EEODB, override the |
| * extension block count. |
| * |
| * Note: HF-EEODB could specify a smaller extension |
| * count too, but we can't risk allocating a smaller |
| * amount. |
| */ |
| int eeodb = edid_hfeeodb_block_count(edid); |
| |
| if (eeodb > num_blocks) { |
| num_blocks = eeodb; |
| alloc_size = edid_size_by_blocks(num_blocks); |
| new = krealloc(edid, alloc_size, GFP_KERNEL); |
| if (!new) |
| goto fail; |
| edid = new; |
| } |
| } |
| } |
| |
| if (invalid_blocks) { |
| connector_bad_edid(connector, edid, num_blocks); |
| |
| edid = edid_filter_invalid_blocks(edid, &alloc_size); |
| } |
| |
| ok: |
| if (size) |
| *size = alloc_size; |
| |
| return edid; |
| |
| fail: |
| kfree(edid); |
| return NULL; |
| } |
| |
| /** |
| * drm_do_get_edid - get EDID data using a custom EDID block read function |
| * @connector: connector we're probing |
| * @read_block: EDID block read function |
| * @context: private data passed to the block read function |
| * |
| * When the I2C adapter connected to the DDC bus is hidden behind a device that |
| * exposes a different interface to read EDID blocks this function can be used |
| * to get EDID data using a custom block read function. |
| * |
| * As in the general case the DDC bus is accessible by the kernel at the I2C |
| * level, drivers must make all reasonable efforts to expose it as an I2C |
| * adapter and use drm_get_edid() instead of abusing this function. |
| * |
| * The EDID may be overridden using debugfs override_edid or firmware EDID |
| * (drm_edid_load_firmware() and drm.edid_firmware parameter), in this priority |
| * order. Having either of them bypasses actual EDID reads. |
| * |
| * Return: Pointer to valid EDID or NULL if we couldn't find any. |
| */ |
| struct edid *drm_do_get_edid(struct drm_connector *connector, |
| read_block_fn read_block, |
| void *context) |
| { |
| return _drm_do_get_edid(connector, read_block, context, NULL); |
| } |
| EXPORT_SYMBOL_GPL(drm_do_get_edid); |
| |
| /** |
| * drm_edid_raw - Get a pointer to the raw EDID data. |
| * @drm_edid: drm_edid container |
| * |
| * Get a pointer to the raw EDID data. |
| * |
| * This is for transition only. Avoid using this like the plague. |
| * |
| * Return: Pointer to raw EDID data. |
| */ |
| const struct edid *drm_edid_raw(const struct drm_edid *drm_edid) |
| { |
| if (!drm_edid || !drm_edid->size) |
| return NULL; |
| |
| /* |
| * Do not return pointers where relying on EDID extension count would |
| * lead to buffer overflow. |
| */ |
| if (WARN_ON(edid_size(drm_edid->edid) > drm_edid->size)) |
| return NULL; |
| |
| return drm_edid->edid; |
| } |
| EXPORT_SYMBOL(drm_edid_raw); |
| |
| /* Allocate struct drm_edid container *without* duplicating the edid data */ |
| static const struct drm_edid *_drm_edid_alloc(const void *edid, size_t size) |
| { |
| struct drm_edid *drm_edid; |
| |
| if (!edid || !size || size < EDID_LENGTH) |
| return NULL; |
| |
| drm_edid = kzalloc(sizeof(*drm_edid), GFP_KERNEL); |
| if (drm_edid) { |
| drm_edid->edid = edid; |
| drm_edid->size = size; |
| } |
| |
| return drm_edid; |
| } |
| |
| /** |
| * drm_edid_alloc - Allocate a new drm_edid container |
| * @edid: Pointer to raw EDID data |
| * @size: Size of memory allocated for EDID |
| * |
| * Allocate a new drm_edid container. Do not calculate edid size from edid, pass |
| * the actual size that has been allocated for the data. There is no validation |
| * of the raw EDID data against the size, but at least the EDID base block must |
| * fit in the buffer. |
| * |
| * The returned pointer must be freed using drm_edid_free(). |
| * |
| * Return: drm_edid container, or NULL on errors |
| */ |
| const struct drm_edid *drm_edid_alloc(const void *edid, size_t size) |
| { |
| const struct drm_edid *drm_edid; |
| |
| if (!edid || !size || size < EDID_LENGTH) |
| return NULL; |
| |
| edid = kmemdup(edid, size, GFP_KERNEL); |
| if (!edid) |
| return NULL; |
| |
| drm_edid = _drm_edid_alloc(edid, size); |
| if (!drm_edid) |
| kfree(edid); |
| |
| return drm_edid; |
| } |
| EXPORT_SYMBOL(drm_edid_alloc); |
| |
| /** |
| * drm_edid_dup - Duplicate a drm_edid container |
| * @drm_edid: EDID to duplicate |
| * |
| * The returned pointer must be freed using drm_edid_free(). |
| * |
| * Returns: drm_edid container copy, or NULL on errors |
| */ |
| const struct drm_edid *drm_edid_dup(const struct drm_edid *drm_edid) |
| { |
| if (!drm_edid) |
| return NULL; |
| |
| return drm_edid_alloc(drm_edid->edid, drm_edid->size); |
| } |
| EXPORT_SYMBOL(drm_edid_dup); |
| |
| /** |
| * drm_edid_free - Free the drm_edid container |
| * @drm_edid: EDID to free |
| */ |
| void drm_edid_free(const struct drm_edid *drm_edid) |
| { |
| if (!drm_edid) |
| return; |
| |
| kfree(drm_edid->edid); |
| kfree(drm_edid); |
| } |
| EXPORT_SYMBOL(drm_edid_free); |
| |
| /** |
| * drm_probe_ddc() - probe DDC presence |
| * @adapter: I2C adapter to probe |
| * |
| * Return: True on success, false on failure. |
| */ |
| bool |
| drm_probe_ddc(struct i2c_adapter *adapter) |
| { |
| unsigned char out; |
| |
| return (drm_do_probe_ddc_edid(adapter, &out, 0, 1) == 0); |
| } |
| EXPORT_SYMBOL(drm_probe_ddc); |
| |
| /** |
| * drm_get_edid - get EDID data, if available |
| * @connector: connector we're probing |
| * @adapter: I2C adapter to use for DDC |
| * |
| * Poke the given I2C channel to grab EDID data if possible. If found, |
| * attach it to the connector. |
| * |
| * Return: Pointer to valid EDID or NULL if we couldn't find any. |
| */ |
| struct edid *drm_get_edid(struct drm_connector *connector, |
| struct i2c_adapter *adapter) |
| { |
| struct edid *edid; |
| |
| if (connector->force == DRM_FORCE_OFF) |
| return NULL; |
| |
| if (connector->force == DRM_FORCE_UNSPECIFIED && !drm_probe_ddc(adapter)) |
| return NULL; |
| |
| edid = _drm_do_get_edid(connector, drm_do_probe_ddc_edid, adapter, NULL); |
| drm_connector_update_edid_property(connector, edid); |
| return edid; |
| } |
| EXPORT_SYMBOL(drm_get_edid); |
| |
| /** |
| * drm_edid_read_custom - Read EDID data using given EDID block read function |
| * @connector: Connector to use |
| * @read_block: EDID block read function |
| * @context: Private data passed to the block read function |
| * |
| * When the I2C adapter connected to the DDC bus is hidden behind a device that |
| * exposes a different interface to read EDID blocks this function can be used |
| * to get EDID data using a custom block read function. |
| * |
| * As in the general case the DDC bus is accessible by the kernel at the I2C |
| * level, drivers must make all reasonable efforts to expose it as an I2C |
| * adapter and use drm_edid_read() or drm_edid_read_ddc() instead of abusing |
| * this function. |
| * |
| * The EDID may be overridden using debugfs override_edid or firmware EDID |
| * (drm_edid_load_firmware() and drm.edid_firmware parameter), in this priority |
| * order. Having either of them bypasses actual EDID reads. |
| * |
| * The returned pointer must be freed using drm_edid_free(). |
| * |
| * Return: Pointer to EDID, or NULL if probe/read failed. |
| */ |
| const struct drm_edid *drm_edid_read_custom(struct drm_connector *connector, |
| read_block_fn read_block, |
| void *context) |
| { |
| const struct drm_edid *drm_edid; |
| struct edid *edid; |
| size_t size = 0; |
| |
| edid = _drm_do_get_edid(connector, read_block, context, &size); |
| if (!edid) |
| return NULL; |
| |
| /* Sanity check for now */ |
| drm_WARN_ON(connector->dev, !size); |
| |
| drm_edid = _drm_edid_alloc(edid, size); |
| if (!drm_edid) |
| kfree(edid); |
| |
| return drm_edid; |
| } |
| EXPORT_SYMBOL(drm_edid_read_custom); |
| |
| /** |
| * drm_edid_read_ddc - Read EDID data using given I2C adapter |
| * @connector: Connector to use |
| * @adapter: I2C adapter to use for DDC |
| * |
| * Read EDID using the given I2C adapter. |
| * |
| * The EDID may be overridden using debugfs override_edid or firmware EDID |
| * (drm_edid_load_firmware() and drm.edid_firmware parameter), in this priority |
| * order. Having either of them bypasses actual EDID reads. |
| * |
| * Prefer initializing connector->ddc with drm_connector_init_with_ddc() and |
| * using drm_edid_read() instead of this function. |
| * |
| * The returned pointer must be freed using drm_edid_free(). |
| * |
| * Return: Pointer to EDID, or NULL if probe/read failed. |
| */ |
| const struct drm_edid *drm_edid_read_ddc(struct drm_connector *connector, |
| struct i2c_adapter *adapter) |
| { |
| const struct drm_edid *drm_edid; |
| |
| if (connector->force == DRM_FORCE_OFF) |
| return NULL; |
| |
| if (connector->force == DRM_FORCE_UNSPECIFIED && !drm_probe_ddc(adapter)) |
| return NULL; |
| |
| drm_edid = drm_edid_read_custom(connector, drm_do_probe_ddc_edid, adapter); |
| |
| /* Note: Do *not* call connector updates here. */ |
| |
| return drm_edid; |
| } |
| EXPORT_SYMBOL(drm_edid_read_ddc); |
| |
| /** |
| * drm_edid_read - Read EDID data using connector's I2C adapter |
| * @connector: Connector to use |
| * |
| * Read EDID using the connector's I2C adapter. |
| * |
| * The EDID may be overridden using debugfs override_edid or firmware EDID |
| * (drm_edid_load_firmware() and drm.edid_firmware parameter), in this priority |
| * order. Having either of them bypasses actual EDID reads. |
| * |
| * The returned pointer must be freed using drm_edid_free(). |
| * |
| * Return: Pointer to EDID, or NULL if probe/read failed. |
| */ |
| const struct drm_edid *drm_edid_read(struct drm_connector *connector) |
| { |
| if (drm_WARN_ON(connector->dev, !connector->ddc)) |
| return NULL; |
| |
| return drm_edid_read_ddc(connector, connector->ddc); |
| } |
| EXPORT_SYMBOL(drm_edid_read); |
| |
| static u32 edid_extract_panel_id(const struct edid *edid) |
| { |
| /* |
| * We represent the ID as a 32-bit number so it can easily be compared |
| * with "==". |
| * |
| * NOTE that we deal with endianness differently for the top half |
| * of this ID than for the bottom half. The bottom half (the product |
| * id) gets decoded as little endian by the EDID_PRODUCT_ID because |
| * that's how everyone seems to interpret it. The top half (the mfg_id) |
| * gets stored as big endian because that makes |
| * drm_edid_encode_panel_id() and drm_edid_decode_panel_id() easier |
| * to write (it's easier to extract the ASCII). It doesn't really |
| * matter, though, as long as the number here is unique. |
| */ |
| return (u32)edid->mfg_id[0] << 24 | |
| (u32)edid->mfg_id[1] << 16 | |
| (u32)EDID_PRODUCT_ID(edid); |
| } |
| |
| /** |
| * drm_edid_get_panel_id - Get a panel's ID through DDC |
| * @adapter: I2C adapter to use for DDC |
| * |
| * This function reads the first block of the EDID of a panel and (assuming |
| * that the EDID is valid) extracts the ID out of it. The ID is a 32-bit value |
| * (16 bits of manufacturer ID and 16 bits of per-manufacturer ID) that's |
| * supposed to be different for each different modem of panel. |
| * |
| * This function is intended to be used during early probing on devices where |
| * more than one panel might be present. Because of its intended use it must |
| * assume that the EDID of the panel is correct, at least as far as the ID |
| * is concerned (in other words, we don't process any overrides here). |
| * |
| * NOTE: it's expected that this function and drm_do_get_edid() will both |
| * be read the EDID, but there is no caching between them. Since we're only |
| * reading the first block, hopefully this extra overhead won't be too big. |
| * |
| * Return: A 32-bit ID that should be different for each make/model of panel. |
| * See the functions drm_edid_encode_panel_id() and |
| * drm_edid_decode_panel_id() for some details on the structure of this |
| * ID. |
| */ |
| |
| u32 drm_edid_get_panel_id(struct i2c_adapter *adapter) |
| { |
| enum edid_block_status status; |
| void *base_block; |
| u32 panel_id = 0; |
| |
| /* |
| * There are no manufacturer IDs of 0, so if there is a problem reading |
| * the EDID then we'll just return 0. |
| */ |
| |
| base_block = kzalloc(EDID_LENGTH, GFP_KERNEL); |
| if (!base_block) |
| return 0; |
| |
| status = edid_block_read(base_block, 0, drm_do_probe_ddc_edid, adapter); |
| |
| edid_block_status_print(status, base_block, 0); |
| |
| if (edid_block_status_valid(status, edid_block_tag(base_block))) |
| panel_id = edid_extract_panel_id(base_block); |
| else |
| edid_block_dump(KERN_NOTICE, base_block, 0); |
| |
| kfree(base_block); |
| |
| return panel_id; |
| } |
| EXPORT_SYMBOL(drm_edid_get_panel_id); |
| |
| /** |
| * drm_get_edid_switcheroo - get EDID data for a vga_switcheroo output |
| * @connector: connector we're probing |
| * @adapter: I2C adapter to use for DDC |
| * |
| * Wrapper around drm_get_edid() for laptops with dual GPUs using one set of |
| * outputs. The wrapper adds the requisite vga_switcheroo calls to temporarily |
| * switch DDC to the GPU which is retrieving EDID. |
| * |
| * Return: Pointer to valid EDID or %NULL if we couldn't find any. |
| */ |
| struct edid *drm_get_edid_switcheroo(struct drm_connector *connector, |
| struct i2c_adapter *adapter) |
| { |
| struct drm_device *dev = connector->dev; |
| struct pci_dev *pdev = to_pci_dev(dev->dev); |
| struct edid *edid; |
| |
| if (drm_WARN_ON_ONCE(dev, !dev_is_pci(dev->dev))) |
| return NULL; |
| |
| vga_switcheroo_lock_ddc(pdev); |
| edid = drm_get_edid(connector, adapter); |
| vga_switcheroo_unlock_ddc(pdev); |
| |
| return edid; |
| } |
| EXPORT_SYMBOL(drm_get_edid_switcheroo); |
| |
| /** |
| * drm_edid_duplicate - duplicate an EDID and the extensions |
| * @edid: EDID to duplicate |
| * |
| * Return: Pointer to duplicated EDID or NULL on allocation failure. |
| */ |
| struct edid *drm_edid_duplicate(const struct edid *edid) |
| { |
| return kmemdup(edid, edid_size(edid), GFP_KERNEL); |
| } |
| EXPORT_SYMBOL(drm_edid_duplicate); |
| |
| /*** EDID parsing ***/ |
| |
| /** |
| * edid_get_quirks - return quirk flags for a given EDID |
| * @drm_edid: EDID to process |
| * |
| * This tells subsequent routines what fixes they need to apply. |
| */ |
| static u32 edid_get_quirks(const struct drm_edid *drm_edid) |
| { |
| u32 panel_id = edid_extract_panel_id(drm_edid->edid); |
| const struct edid_quirk *quirk; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(edid_quirk_list); i++) { |
| quirk = &edid_quirk_list[i]; |
| if (quirk->panel_id == panel_id) |
| return quirk->quirks; |
| } |
| |
| return 0; |
| } |
| |
| #define MODE_SIZE(m) ((m)->hdisplay * (m)->vdisplay) |
| #define MODE_REFRESH_DIFF(c,t) (abs((c) - (t))) |
| |
| /* |
| * Walk the mode list for connector, clearing the preferred status on existing |
| * modes and setting it anew for the right mode ala quirks. |
| */ |
| static void edid_fixup_preferred(struct drm_connector *connector) |
| { |
| const struct drm_display_info *info = &connector->display_info; |
| struct drm_display_mode *t, *cur_mode, *preferred_mode; |
| int target_refresh = 0; |
| int cur_vrefresh, preferred_vrefresh; |
| |
| if (list_empty(&connector->probed_modes)) |
| return; |
| |
| if (info->quirks & EDID_QUIRK_PREFER_LARGE_60) |
| target_refresh = 60; |
| if (info->quirks & EDID_QUIRK_PREFER_LARGE_75) |
| target_refresh = 75; |
| |
| preferred_mode = list_first_entry(&connector->probed_modes, |
| struct drm_display_mode, head); |
| |
| list_for_each_entry_safe(cur_mode, t, &connector->probed_modes, head) { |
| cur_mode->type &= ~DRM_MODE_TYPE_PREFERRED; |
| |
| if (cur_mode == preferred_mode) |
| continue; |
| |
| /* Largest mode is preferred */ |
| if (MODE_SIZE(cur_mode) > MODE_SIZE(preferred_mode)) |
| preferred_mode = cur_mode; |
| |
| cur_vrefresh = drm_mode_vrefresh(cur_mode); |
| preferred_vrefresh = drm_mode_vrefresh(preferred_mode); |
| /* At a given size, try to get closest to target refresh */ |
| if ((MODE_SIZE(cur_mode) == MODE_SIZE(preferred_mode)) && |
| MODE_REFRESH_DIFF(cur_vrefresh, target_refresh) < |
| MODE_REFRESH_DIFF(preferred_vrefresh, target_refresh)) { |
| preferred_mode = cur_mode; |
| } |
| } |
| |
| preferred_mode->type |= DRM_MODE_TYPE_PREFERRED; |
| } |
| |
| static bool |
| mode_is_rb(const struct drm_display_mode *mode) |
| { |
| return (mode->htotal - mode->hdisplay == 160) && |
| (mode->hsync_end - mode->hdisplay == 80) && |
| (mode->hsync_end - mode->hsync_start == 32) && |
| (mode->vsync_start - mode->vdisplay == 3); |
| } |
| |
| /* |
| * drm_mode_find_dmt - Create a copy of a mode if present in DMT |
| * @dev: Device to duplicate against |
| * @hsize: Mode width |
| * @vsize: Mode height |
| * @fresh: Mode refresh rate |
| * @rb: Mode reduced-blanking-ness |
| * |
| * Walk the DMT mode list looking for a match for the given parameters. |
| * |
| * Return: A newly allocated copy of the mode, or NULL if not found. |
| */ |
| struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev, |
| int hsize, int vsize, int fresh, |
| bool rb) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(drm_dmt_modes); i++) { |
| const struct drm_display_mode *ptr = &drm_dmt_modes[i]; |
| |
| if (hsize != ptr->hdisplay) |
| continue; |
| if (vsize != ptr->vdisplay) |
| continue; |
| if (fresh != drm_mode_vrefresh(ptr)) |
| continue; |
| if (rb != mode_is_rb(ptr)) |
| continue; |
| |
| return drm_mode_duplicate(dev, ptr); |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(drm_mode_find_dmt); |
| |
| static bool is_display_descriptor(const struct detailed_timing *descriptor, u8 type) |
| { |
| BUILD_BUG_ON(offsetof(typeof(*descriptor), pixel_clock) != 0); |
| BUILD_BUG_ON(offsetof(typeof(*descriptor), data.other_data.pad1) != 2); |
| BUILD_BUG_ON(offsetof(typeof(*descriptor), data.other_data.type) != 3); |
| |
| return descriptor->pixel_clock == 0 && |
| descriptor->data.other_data.pad1 == 0 && |
| descriptor->data.other_data.type == type; |
| } |
| |
| static bool is_detailed_timing_descriptor(const struct detailed_timing *descriptor) |
| { |
| BUILD_BUG_ON(offsetof(typeof(*descriptor), pixel_clock) != 0); |
| |
| return descriptor->pixel_clock != 0; |
| } |
| |
| typedef void detailed_cb(const struct detailed_timing *timing, void *closure); |
| |
| static void |
| cea_for_each_detailed_block(const u8 *ext, detailed_cb *cb, void *closure) |
| { |
| int i, n; |
| u8 d = ext[0x02]; |
| const u8 *det_base = ext + d; |
| |
| if (d < 4 || d > 127) |
| return; |
| |
| n = (127 - d) / 18; |
| for (i = 0; i < n; i++) |
| cb((const struct detailed_timing *)(det_base + 18 * i), closure); |
| } |
| |
| static void |
| vtb_for_each_detailed_block(const u8 *ext, detailed_cb *cb, void *closure) |
| { |
| unsigned int i, n = min((int)ext[0x02], 6); |
| const u8 *det_base = ext + 5; |
| |
| if (ext[0x01] != 1) |
| return; /* unknown version */ |
| |
| for (i = 0; i < n; i++) |
| cb((const struct detailed_timing *)(det_base + 18 * i), closure); |
| } |
| |
| static void drm_for_each_detailed_block(const struct drm_edid *drm_edid, |
| detailed_cb *cb, void *closure) |
| { |
| struct drm_edid_iter edid_iter; |
| const u8 *ext; |
| int i; |
| |
| if (!drm_edid) |
| return; |
| |
| for (i = 0; i < EDID_DETAILED_TIMINGS; i++) |
| cb(&drm_edid->edid->detailed_timings[i], closure); |
| |
| drm_edid_iter_begin(drm_edid, &edid_iter); |
| drm_edid_iter_for_each(ext, &edid_iter) { |
| switch (*ext) { |
| case CEA_EXT: |
| cea_for_each_detailed_block(ext, cb, closure); |
| break; |
| case VTB_EXT: |
| vtb_for_each_detailed_block(ext, cb, closure); |
| break; |
| default: |
| break; |
| } |
| } |
| drm_edid_iter_end(&edid_iter); |
| } |
| |
| static void |
| is_rb(const struct detailed_timing *descriptor, void *data) |
| { |
| bool *res = data; |
| |
| if (!is_display_descriptor(descriptor, EDID_DETAIL_MONITOR_RANGE)) |
| return; |
| |
| BUILD_BUG_ON(offsetof(typeof(*descriptor), data.other_data.data.range.flags) != 10); |
| BUILD_BUG_ON(offsetof(typeof(*descriptor), data.other_data.data.range.formula.cvt.flags) != 15); |
| |
| if (descriptor->data.other_data.data.range.flags == DRM_EDID_CVT_SUPPORT_FLAG && |
| descriptor->data.other_data.data.range.formula.cvt.flags & DRM_EDID_CVT_FLAGS_REDUCED_BLANKING) |
| *res = true; |
| } |
| |
| /* EDID 1.4 defines this explicitly. For EDID 1.3, we guess, badly. */ |
| static bool |
| drm_monitor_supports_rb(const struct drm_edid *drm_edid) |
| { |
| if (drm_edid->edid->revision >= 4) { |
| bool ret = false; |
| |
| drm_for_each_detailed_block(drm_edid, is_rb, &ret); |
| return ret; |
| } |
| |
| return ((drm_edid->edid->input & DRM_EDID_INPUT_DIGITAL) != 0); |
| } |
| |
| static void |
| find_gtf2(const struct detailed_timing *descriptor, void *data) |
| { |
| const struct detailed_timing **res = data; |
| |
| if (!is_display_descriptor(descriptor, EDID_DETAIL_MONITOR_RANGE)) |
| return; |
| |
| BUILD_BUG_ON(offsetof(typeof(*descriptor), data.other_data.data.range.flags) != 10); |
| |
| if (descriptor->data.other_data.data.range.flags == DRM_EDID_SECONDARY_GTF_SUPPORT_FLAG) |
| *res = descriptor; |
| } |
| |
| /* Secondary GTF curve kicks in above some break frequency */ |
| static int |
| drm_gtf2_hbreak(const struct drm_edid *drm_edid) |
| { |
| const struct detailed_timing *descriptor = NULL; |
| |
| drm_for_each_detailed_block(drm_edid, find_gtf2, &descriptor); |
| |
| BUILD_BUG_ON(offsetof(typeof(*descriptor), data.other_data.data.range.formula.gtf2.hfreq_start_khz) != 12); |
| |
| return descriptor ? descriptor->data.other_data.data.range.formula.gtf2.hfreq_start_khz * 2 : 0; |
| } |
| |
| static int |
| drm_gtf2_2c(const struct drm_edid *drm_edid) |
| { |
| const struct detailed_timing *descriptor = NULL; |
| |
| drm_for_each_detailed_block(drm_edid, find_gtf2, &descriptor); |
| |
| BUILD_BUG_ON(offsetof(typeof(*descriptor), data.other_data.data.range.formula.gtf2.c) != 13); |
| |
| return descriptor ? descriptor->data.other_data.data.range.formula.gtf2.c : 0; |
| } |
| |
| static int |
| drm_gtf2_m(const struct drm_edid *drm_edid) |
| { |
| const struct detailed_timing *descriptor = NULL; |
| |
| drm_for_each_detailed_block(drm_edid, find_gtf2, &descriptor); |
| |
| BUILD_BUG_ON(offsetof(typeof(*descriptor), data.other_data.data.range.formula.gtf2.m) != 14); |
| |
| return descriptor ? le16_to_cpu(descriptor->data.other_data.data.range.formula.gtf2.m) : 0; |
| } |
| |
| static int |
| drm_gtf2_k(const struct drm_edid *drm_edid) |
| { |
| const struct detailed_timing *descriptor = NULL; |
| |
| drm_for_each_detailed_block(drm_edid, find_gtf2, &descriptor); |
| |
| BUILD_BUG_ON(offsetof(typeof(*descriptor), data.other_data.data.range.formula.gtf2.k) != 16); |
| |
| return descriptor ? descriptor->data.other_data.data.range.formula.gtf2.k : 0; |
| } |
| |
| static int |
| drm_gtf2_2j(const struct drm_edid *drm_edid) |
| { |
| const struct detailed_timing *descriptor = NULL; |
| |
| drm_for_each_detailed_block(drm_edid, find_gtf2, &descriptor); |
| |
| BUILD_BUG_ON(offsetof(typeof(*descriptor), data.other_data.data.range.formula.gtf2.j) != 17); |
| |
| return descriptor ? descriptor->data.other_data.data.range.formula.gtf2.j : 0; |
| } |
| |
| static void |
| get_timing_level(const struct detailed_timing *descriptor, void *data) |
| { |
| int *res = data; |
| |
| if (!is_display_descriptor(descriptor, EDID_DETAIL_MONITOR_RANGE)) |
| return; |
| |
| BUILD_BUG_ON(offsetof(typeof(*descriptor), data.other_data.data.range.flags) != 10); |
| |
| switch (descriptor->data.other_data.data.range.flags) { |
| case DRM_EDID_DEFAULT_GTF_SUPPORT_FLAG: |
| *res = LEVEL_GTF; |
| break; |
| case DRM_EDID_SECONDARY_GTF_SUPPORT_FLAG: |
| *res = LEVEL_GTF2; |
| break; |
| case DRM_EDID_CVT_SUPPORT_FLAG: |
| *res = LEVEL_CVT; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /* Get standard timing level (CVT/GTF/DMT). */ |
| static int standard_timing_level(const struct drm_edid *drm_edid) |
| { |
| const struct edid *edid = drm_edid->edid; |
| |
| if (edid->revision >= 4) { |
| /* |
| * If the range descriptor doesn't |
| * indicate otherwise default to CVT |
| */ |
| int ret = LEVEL_CVT; |
| |
| drm_for_each_detailed_block(drm_edid, get_timing_level, &ret); |
| |
| return ret; |
| } else if (edid->revision >= 3 && drm_gtf2_hbreak(drm_edid)) { |
| return LEVEL_GTF2; |
| } else if (edid->revision >= 2) { |
| return LEVEL_GTF; |
| } else { |
| return LEVEL_DMT; |
| } |
| } |
| |
| /* |
| * 0 is reserved. The spec says 0x01 fill for unused timings. Some old |
| * monitors fill with ascii space (0x20) instead. |
| */ |
| static int |
| bad_std_timing(u8 a, u8 b) |
| { |
| return (a == 0x00 && b == 0x00) || |
| (a == 0x01 && b == 0x01) || |
| (a == 0x20 && b == 0x20); |
| } |
| |
| static int drm_mode_hsync(const struct drm_display_mode *mode) |
| { |
| if (mode->htotal <= 0) |
| return 0; |
| |
| return DIV_ROUND_CLOSEST(mode->clock, mode->htotal); |
| } |
| |
| static struct drm_display_mode * |
| drm_gtf2_mode(struct drm_device *dev, |
| const struct drm_edid *drm_edid, |
| int hsize, int vsize, int vrefresh_rate) |
| { |
| struct drm_display_mode *mode; |
| |
| /* |
| * This is potentially wrong if there's ever a monitor with |
| * more than one ranges section, each claiming a different |
| * secondary GTF curve. Please don't do that. |
| */ |
| mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0); |
| if (!mode) |
| return NULL; |
| |
| if (drm_mode_hsync(mode) > drm_gtf2_hbreak(drm_edid)) { |
| drm_mode_destroy(dev, mode); |
| mode = drm_gtf_mode_complex(dev, hsize, vsize, |
| vrefresh_rate, 0, 0, |
| drm_gtf2_m(drm_edid), |
| drm_gtf2_2c(drm_edid), |
| drm_gtf2_k(drm_edid), |
| drm_gtf2_2j(drm_edid)); |
| } |
| |
| return mode; |
| } |
| |
| /* |
| * Take the standard timing params (in this case width, aspect, and refresh) |
| * and convert them into a real mode using CVT/GTF/DMT. |
| */ |
| static struct drm_display_mode *drm_mode_std(struct drm_connector *connector, |
| const struct drm_edid *drm_edid, |
| const struct std_timing *t) |
| { |
| struct drm_device *dev = connector->dev; |
| struct drm_display_mode *m, *mode = NULL; |
| int hsize, vsize; |
| int vrefresh_rate; |
| unsigned aspect_ratio = (t->vfreq_aspect & EDID_TIMING_ASPECT_MASK) |
| >> EDID_TIMING_ASPECT_SHIFT; |
| unsigned vfreq = (t->vfreq_aspect & EDID_TIMING_VFREQ_MASK) |
| >> EDID_TIMING_VFREQ_SHIFT; |
| int timing_level = standard_timing_level(drm_edid); |
| |
| if (bad_std_timing(t->hsize, t->vfreq_aspect)) |
| return NULL; |
| |
| /* According to the EDID spec, the hdisplay = hsize * 8 + 248 */ |
| hsize = t->hsize * 8 + 248; |
| /* vrefresh_rate = vfreq + 60 */ |
| vrefresh_rate = vfreq + 60; |
| /* the vdisplay is calculated based on the aspect ratio */ |
| if (aspect_ratio == 0) { |
| if (drm_edid->edid->revision < 3) |
| vsize = hsize; |
| else |
| vsize = (hsize * 10) / 16; |
| } else if (aspect_ratio == 1) |
| vsize = (hsize * 3) / 4; |
| else if (aspect_ratio == 2) |
| vsize = (hsize * 4) / 5; |
| else |
| vsize = (hsize * 9) / 16; |
| |
| /* HDTV hack, part 1 */ |
| if (vrefresh_rate == 60 && |
| ((hsize == 1360 && vsize == 765) || |
| (hsize == 1368 && vsize == 769))) { |
| hsize = 1366; |
| vsize = 768; |
| } |
| |
| /* |
| * If this connector already has a mode for this size and refresh |
| * rate (because it came from detailed or CVT info), use that |
| * instead. This way we don't have to guess at interlace or |
| * reduced blanking. |
| */ |
| list_for_each_entry(m, &connector->probed_modes, head) |
| if (m->hdisplay == hsize && m->vdisplay == vsize && |
| drm_mode_vrefresh(m) == vrefresh_rate) |
| return NULL; |
| |
| /* HDTV hack, part 2 */ |
| if (hsize == 1366 && vsize == 768 && vrefresh_rate == 60) { |
| mode = drm_cvt_mode(dev, 1366, 768, vrefresh_rate, 0, 0, |
| false); |
| if (!mode) |
| return NULL; |
| mode->hdisplay = 1366; |
| mode->hsync_start = mode->hsync_start - 1; |
| mode->hsync_end = mode->hsync_end - 1; |
| return mode; |
| } |
| |
| /* check whether it can be found in default mode table */ |
| if (drm_monitor_supports_rb(drm_edid)) { |
| mode = drm_mode_find_dmt(dev, hsize, vsize, vrefresh_rate, |
| true); |
| if (mode) |
| return mode; |
| } |
| mode = drm_mode_find_dmt(dev, hsize, vsize, vrefresh_rate, false); |
| if (mode) |
| return mode; |
| |
| /* okay, generate it */ |
| switch (timing_level) { |
| case LEVEL_DMT: |
| break; |
| case LEVEL_GTF: |
| mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0); |
| break; |
| case LEVEL_GTF2: |
| mode = drm_gtf2_mode(dev, drm_edid, hsize, vsize, vrefresh_rate); |
| break; |
| case LEVEL_CVT: |
| mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0, |
| false); |
| break; |
| } |
| return mode; |
| } |
| |
| /* |
| * EDID is delightfully ambiguous about how interlaced modes are to be |
| * encoded. Our internal representation is of frame height, but some |
| * HDTV detailed timings are encoded as field height. |
| * |
| * The format list here is from CEA, in frame size. Technically we |
| * should be checking refresh rate too. Whatever. |
| */ |
| static void |
| drm_mode_do_interlace_quirk(struct drm_display_mode *mode, |
| const struct detailed_pixel_timing *pt) |
| { |
| int i; |
| static const struct { |
| int w, h; |
| } cea_interlaced[] = { |
| { 1920, 1080 }, |
| { 720, 480 }, |
| { 1440, 480 }, |
| { 2880, 480 }, |
| { 720, 576 }, |
| { 1440, 576 }, |
| { 2880, 576 }, |
| }; |
| |
| if (!(pt->misc & DRM_EDID_PT_INTERLACED)) |
| return; |
| |
| for (i = 0; i < ARRAY_SIZE(cea_interlaced); i++) { |
| if ((mode->hdisplay == cea_interlaced[i].w) && |
| (mode->vdisplay == cea_interlaced[i].h / 2)) { |
| mode->vdisplay *= 2; |
| mode->vsync_start *= 2; |
| mode->vsync_end *= 2; |
| mode->vtotal *= 2; |
| mode->vtotal |= 1; |
| } |
| } |
| |
| mode->flags |= DRM_MODE_FLAG_INTERLACE; |
| } |
| |
| /* |
| * Create a new mode from an EDID detailed timing section. An EDID detailed |
| * timing block contains enough info for us to create and return a new struct |
| * drm_display_mode. |
| */ |
| static struct drm_display_mode *drm_mode_detailed(struct drm_connector *connector, |
| const struct drm_edid *drm_edid, |
| const struct detailed_timing *timing) |
| { |
| const struct drm_display_info *info = &connector->display_info; |
| struct drm_device *dev = connector->dev; |
| struct drm_display_mode *mode; |
| const struct detailed_pixel_timing *pt = &timing->data.pixel_data; |
| unsigned hactive = (pt->hactive_hblank_hi & 0xf0) << 4 | pt->hactive_lo; |
| unsigned vactive = (pt->vactive_vblank_hi & 0xf0) << 4 | pt->vactive_lo; |
| unsigned hblank = (pt->hactive_hblank_hi & 0xf) << 8 | pt->hblank_lo; |
| unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo; |
| unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo; |
| unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo; |
| unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 2 | pt->vsync_offset_pulse_width_lo >> 4; |
| unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf); |
| |
| /* ignore tiny modes */ |
| if (hactive < 64 || vactive < 64) |
| return NULL; |
| |
| if (pt->misc & DRM_EDID_PT_STEREO) { |
| drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Stereo mode not supported\n", |
| connector->base.id, connector->name); |
| return NULL; |
| } |
| |
| /* it is incorrect if hsync/vsync width is zero */ |
| if (!hsync_pulse_width || !vsync_pulse_width) { |
| drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Incorrect Detailed timing. Wrong Hsync/Vsync pulse width\n", |
| connector->base.id, connector->name); |
| return NULL; |
| } |
| |
| if (info->quirks & EDID_QUIRK_FORCE_REDUCED_BLANKING) { |
| mode = drm_cvt_mode(dev, hactive, vactive, 60, true, false, false); |
| if (!mode) |
| return NULL; |
| |
| goto set_size; |
| } |
| |
| mode = drm_mode_create(dev); |
| if (!mode) |
| return NULL; |
| |
| if (info->quirks & EDID_QUIRK_135_CLOCK_TOO_HIGH) |
| mode->clock = 1088 * 10; |
| else |
| mode->clock = le16_to_cpu(timing->pixel_clock) * 10; |
| |
| mode->hdisplay = hactive; |
| mode->hsync_start = mode->hdisplay + hsync_offset; |
| mode->hsync_end = mode->hsync_start + hsync_pulse_width; |
| mode->htotal = mode->hdisplay + hblank; |
| |
| mode->vdisplay = vactive; |
| mode->vsync_start = mode->vdisplay + vsync_offset; |
| mode->vsync_end = mode->vsync_start + vsync_pulse_width; |
| mode->vtotal = mode->vdisplay + vblank; |
| |
| /* Some EDIDs have bogus h/vtotal values */ |
| if (mode->hsync_end > mode->htotal) |
| mode->htotal = mode->hsync_end + 1; |
| if (mode->vsync_end > mode->vtotal) |
| mode->vtotal = mode->vsync_end + 1; |
| |
| drm_mode_do_interlace_quirk(mode, pt); |
| |
| if (info->quirks & EDID_QUIRK_DETAILED_SYNC_PP) { |
| mode->flags |= DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC; |
| } else { |
| switch (pt->misc & DRM_EDID_PT_SYNC_MASK) { |
| case DRM_EDID_PT_ANALOG_CSYNC: |
| case DRM_EDID_PT_BIPOLAR_ANALOG_CSYNC: |
| drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Analog composite sync!\n", |
| connector->base.id, connector->name); |
| mode->flags |= DRM_MODE_FLAG_CSYNC | DRM_MODE_FLAG_NCSYNC; |
| break; |
| case DRM_EDID_PT_DIGITAL_CSYNC: |
| drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Digital composite sync!\n", |
| connector->base.id, connector->name); |
| mode->flags |= DRM_MODE_FLAG_CSYNC; |
| mode->flags |= (pt->misc & DRM_EDID_PT_HSYNC_POSITIVE) ? |
| DRM_MODE_FLAG_PCSYNC : DRM_MODE_FLAG_NCSYNC; |
| break; |
| case DRM_EDID_PT_DIGITAL_SEPARATE_SYNC: |
| mode->flags |= (pt->misc & DRM_EDID_PT_HSYNC_POSITIVE) ? |
| DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC; |
| mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ? |
| DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC; |
| break; |
| } |
| } |
| |
| set_size: |
| mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4; |
| mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8; |
| |
| if (info->quirks & EDID_QUIRK_DETAILED_IN_CM) { |
| mode->width_mm *= 10; |
| mode->height_mm *= 10; |
| } |
| |
| if (info->quirks & EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE) { |
| mode->width_mm = drm_edid->edid->width_cm * 10; |
| mode->height_mm = drm_edid->edid->height_cm * 10; |
| } |
| |
| mode->type = DRM_MODE_TYPE_DRIVER; |
| drm_mode_set_name(mode); |
| |
| return mode; |
| } |
| |
| static bool |
| mode_in_hsync_range(const struct drm_display_mode *mode, |
| const struct edid *edid, const u8 *t) |
| { |
| int hsync, hmin, hmax; |
| |
| hmin = t[7]; |
| if (edid->revision >= 4) |
| hmin += ((t[4] & 0x04) ? 255 : 0); |
| hmax = t[8]; |
| if (edid->revision >= 4) |
| hmax += ((t[4] & 0x08) ? 255 : 0); |
| hsync = drm_mode_hsync(mode); |
| |
| return (hsync <= hmax && hsync >= hmin); |
| } |
| |
| static bool |
| mode_in_vsync_range(const struct drm_display_mode *mode, |
| const struct edid *edid, const u8 *t) |
| { |
| int vsync, vmin, vmax; |
| |
| vmin = t[5]; |
| if (edid->revision >= 4) |
| vmin += ((t[4] & 0x01) ? 255 : 0); |
| vmax = t[6]; |
| if (edid->revision >= 4) |
| vmax += ((t[4] & 0x02) ? 255 : 0); |
| vsync = drm_mode_vrefresh(mode); |
| |
| return (vsync <= vmax && vsync >= vmin); |
| } |
| |
| static u32 |
| range_pixel_clock(const struct edid *edid, const u8 *t) |
| { |
| /* unspecified */ |
| if (t[9] == 0 || t[9] == 255) |
| return 0; |
| |
| /* 1.4 with CVT support gives us real precision, yay */ |
| if (edid->revision >= 4 && t[10] == DRM_EDID_CVT_SUPPORT_FLAG) |
| return (t[9] * 10000) - ((t[12] >> 2) * 250); |
| |
| /* 1.3 is pathetic, so fuzz up a bit */ |
| return t[9] * 10000 + 5001; |
| } |
| |
| static bool mode_in_range(const struct drm_display_mode *mode, |
| const struct drm_edid *drm_edid, |
| const struct detailed_timing *timing) |
| { |
| const struct edid *edid = drm_edid->edid; |
| u32 max_clock; |
| const u8 *t = (const u8 *)timing; |
| |
| if (!mode_in_hsync_range(mode, edid, t)) |
| return false; |
| |
| if (!mode_in_vsync_range(mode, edid, t)) |
| return false; |
| |
| if ((max_clock = range_pixel_clock(edid, t))) |
| if (mode->clock > max_clock) |
| return false; |
| |
| /* 1.4 max horizontal check */ |
| if (edid->revision >= 4 && t[10] == DRM_EDID_CVT_SUPPORT_FLAG) |
| if (t[13] && mode->hdisplay > 8 * (t[13] + (256 * (t[12]&0x3)))) |
| return false; |
| |
| if (mode_is_rb(mode) && !drm_monitor_supports_rb(drm_edid)) |
| return false; |
| |
| return true; |
| } |
| |
| static bool valid_inferred_mode(const struct drm_connector *connector, |
| const struct drm_display_mode *mode) |
| { |
| const struct drm_display_mode *m; |
| bool ok = false; |
| |
| list_for_each_entry(m, &connector->probed_modes, head) { |
| if (mode->hdisplay == m->hdisplay && |
| mode->vdisplay == m->vdisplay && |
| drm_mode_vrefresh(mode) == drm_mode_vrefresh(m)) |
| return false; /* duplicated */ |
| if (mode->hdisplay <= m->hdisplay && |
| mode->vdisplay <= m->vdisplay) |
| ok = true; |
| } |
| return ok; |
| } |
| |
| static int drm_dmt_modes_for_range(struct drm_connector *connector, |
| const struct drm_edid *drm_edid, |
| const struct detailed_timing *timing) |
| { |
| int i, modes = 0; |
| struct drm_display_mode *newmode; |
| struct drm_device *dev = connector->dev; |
| |
| for (i = 0; i < ARRAY_SIZE(drm_dmt_modes); i++) { |
| if (mode_in_range(drm_dmt_modes + i, drm_edid, timing) && |
| valid_inferred_mode(connector, drm_dmt_modes + i)) { |
| newmode = drm_mode_duplicate(dev, &drm_dmt_modes[i]); |
| if (newmode) { |
| drm_mode_probed_add(connector, newmode); |
| modes++; |
| } |
| } |
| } |
| |
| return modes; |
| } |
| |
| /* fix up 1366x768 mode from 1368x768; |
| * GFT/CVT can't express 1366 width which isn't dividable by 8 |
| */ |
| void drm_mode_fixup_1366x768(struct drm_display_mode *mode) |
| { |
| if (mode->hdisplay == 1368 && mode->vdisplay == 768) { |
| mode->hdisplay = 1366; |
| mode->hsync_start--; |
| mode->hsync_end--; |
| drm_mode_set_name(mode); |
| } |
| } |
| |
| static int drm_gtf_modes_for_range(struct drm_connector *connector, |
| const struct drm_edid *drm_edid, |
| const struct detailed_timing *timing) |
| { |
| int i, modes = 0; |
| struct drm_display_mode *newmode; |
| struct drm_device *dev = connector->dev; |
| |
| for (i = 0; i < ARRAY_SIZE(extra_modes); i++) { |
| const struct minimode *m = &extra_modes[i]; |
| |
| newmode = drm_gtf_mode(dev, m->w, m->h, m->r, 0, 0); |
| if (!newmode) |
| return modes; |
| |
| drm_mode_fixup_1366x768(newmode); |
| if (!mode_in_range(newmode, drm_edid, timing) || |
| !valid_inferred_mode(connector, newmode)) { |
| drm_mode_destroy(dev, newmode); |
| continue; |
| } |
| |
| drm_mode_probed_add(connector, newmode); |
| modes++; |
| } |
| |
| return modes; |
| } |
| |
| static int drm_gtf2_modes_for_range(struct drm_connector *connector, |
| const struct drm_edid *drm_edid, |
| const struct detailed_timing *timing) |
| { |
| int i, modes = 0; |
| struct drm_display_mode *newmode; |
| struct drm_device *dev = connector->dev; |
| |
| for (i = 0; i < ARRAY_SIZE(extra_modes); i++) { |
| const struct minimode *m = &extra_modes[i]; |
| |
| newmode = drm_gtf2_mode(dev, drm_edid, m->w, m->h, m->r); |
| if (!newmode) |
| return modes; |
| |
| drm_mode_fixup_1366x768(newmode); |
| if (!mode_in_range(newmode, drm_edid, timing) || |
| !valid_inferred_mode(connector, newmode)) { |
| drm_mode_destroy(dev, newmode); |
| continue; |
| } |
| |
| drm_mode_probed_add(connector, newmode); |
| modes++; |
| } |
| |
| return modes; |
| } |
| |
| static int drm_cvt_modes_for_range(struct drm_connector *connector, |
| const struct drm_edid *drm_edid, |
| const struct detailed_timing *timing) |
| { |
| int i, modes = 0; |
| struct drm_display_mode *newmode; |
| struct drm_device *dev = connector->dev; |
| bool rb = drm_monitor_supports_rb(drm_edid); |
| |
| for (i = 0; i < ARRAY_SIZE(extra_modes); i++) { |
| const struct minimode *m = &extra_modes[i]; |
| |
| newmode = drm_cvt_mode(dev, m->w, m->h, m->r, rb, 0, 0); |
| if (!newmode) |
| return modes; |
| |
| drm_mode_fixup_1366x768(newmode); |
| if (!mode_in_range(newmode, drm_edid, timing) || |
| !valid_inferred_mode(connector, newmode)) { |
| drm_mode_destroy(dev, newmode); |
| continue; |
| } |
| |
| drm_mode_probed_add(connector, newmode); |
| modes++; |
| } |
| |
| return modes; |
| } |
| |
| static void |
| do_inferred_modes(const struct detailed_timing *timing, void *c) |
| { |
| struct detailed_mode_closure *closure = c; |
| const struct detailed_non_pixel *data = &timing->data.other_data; |
| const struct detailed_data_monitor_range *range = &data->data.range; |
| |
| if (!is_display_descriptor(timing, EDID_DETAIL_MONITOR_RANGE)) |
| return; |
| |
| closure->modes += drm_dmt_modes_for_range(closure->connector, |
| closure->drm_edid, |
| timing); |
| |
| if (closure->drm_edid->edid->revision < 2) |
| return; /* GTF not defined yet */ |
| |
| switch (range->flags) { |
| case DRM_EDID_SECONDARY_GTF_SUPPORT_FLAG: |
| closure->modes += drm_gtf2_modes_for_range(closure->connector, |
| closure->drm_edid, |
| timing); |
| break; |
| case DRM_EDID_DEFAULT_GTF_SUPPORT_FLAG: |
| closure->modes += drm_gtf_modes_for_range(closure->connector, |
| closure->drm_edid, |
| timing); |
| break; |
| case DRM_EDID_CVT_SUPPORT_FLAG: |
| if (closure->drm_edid->edid->revision < 4) |
| break; |
| |
| closure->modes += drm_cvt_modes_for_range(closure->connector, |
| closure->drm_edid, |
| timing); |
| break; |
| case DRM_EDID_RANGE_LIMITS_ONLY_FLAG: |
| default: |
| break; |
| } |
| } |
| |
| static int add_inferred_modes(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| struct detailed_mode_closure closure = { |
| .connector = connector, |
| .drm_edid = drm_edid, |
| }; |
| |
| if (drm_edid->edid->revision >= 1) |
| drm_for_each_detailed_block(drm_edid, do_inferred_modes, &closure); |
| |
| return closure.modes; |
| } |
| |
| static int |
| drm_est3_modes(struct drm_connector *connector, const struct detailed_timing *timing) |
| { |
| int i, j, m, modes = 0; |
| struct drm_display_mode *mode; |
| const u8 *est = ((const u8 *)timing) + 6; |
| |
| for (i = 0; i < 6; i++) { |
| for (j = 7; j >= 0; j--) { |
| m = (i * 8) + (7 - j); |
| if (m >= ARRAY_SIZE(est3_modes)) |
| break; |
| if (est[i] & (1 << j)) { |
| mode = drm_mode_find_dmt(connector->dev, |
| est3_modes[m].w, |
| est3_modes[m].h, |
| est3_modes[m].r, |
| est3_modes[m].rb); |
| if (mode) { |
| drm_mode_probed_add(connector, mode); |
| modes++; |
| } |
| } |
| } |
| } |
| |
| return modes; |
| } |
| |
| static void |
| do_established_modes(const struct detailed_timing *timing, void *c) |
| { |
| struct detailed_mode_closure *closure = c; |
| |
| if (!is_display_descriptor(timing, EDID_DETAIL_EST_TIMINGS)) |
| return; |
| |
| closure->modes += drm_est3_modes(closure->connector, timing); |
| } |
| |
| /* |
| * Get established modes from EDID and add them. Each EDID block contains a |
| * bitmap of the supported "established modes" list (defined above). Tease them |
| * out and add them to the global modes list. |
| */ |
| static int add_established_modes(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| struct drm_device *dev = connector->dev; |
| const struct edid *edid = drm_edid->edid; |
| unsigned long est_bits = edid->established_timings.t1 | |
| (edid->established_timings.t2 << 8) | |
| ((edid->established_timings.mfg_rsvd & 0x80) << 9); |
| int i, modes = 0; |
| struct detailed_mode_closure closure = { |
| .connector = connector, |
| .drm_edid = drm_edid, |
| }; |
| |
| for (i = 0; i <= EDID_EST_TIMINGS; i++) { |
| if (est_bits & (1<<i)) { |
| struct drm_display_mode *newmode; |
| |
| newmode = drm_mode_duplicate(dev, &edid_est_modes[i]); |
| if (newmode) { |
| drm_mode_probed_add(connector, newmode); |
| modes++; |
| } |
| } |
| } |
| |
| if (edid->revision >= 1) |
| drm_for_each_detailed_block(drm_edid, do_established_modes, |
| &closure); |
| |
| return modes + closure.modes; |
| } |
| |
| static void |
| do_standard_modes(const struct detailed_timing *timing, void *c) |
| { |
| struct detailed_mode_closure *closure = c; |
| const struct detailed_non_pixel *data = &timing->data.other_data; |
| struct drm_connector *connector = closure->connector; |
| int i; |
| |
| if (!is_display_descriptor(timing, EDID_DETAIL_STD_MODES)) |
| return; |
| |
| for (i = 0; i < 6; i++) { |
| const struct std_timing *std = &data->data.timings[i]; |
| struct drm_display_mode *newmode; |
| |
| newmode = drm_mode_std(connector, closure->drm_edid, std); |
| if (newmode) { |
| drm_mode_probed_add(connector, newmode); |
| closure->modes++; |
| } |
| } |
| } |
| |
| /* |
| * Get standard modes from EDID and add them. Standard modes can be calculated |
| * using the appropriate standard (DMT, GTF, or CVT). Grab them from EDID and |
| * add them to the list. |
| */ |
| static int add_standard_modes(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| int i, modes = 0; |
| struct detailed_mode_closure closure = { |
| .connector = connector, |
| .drm_edid = drm_edid, |
| }; |
| |
| for (i = 0; i < EDID_STD_TIMINGS; i++) { |
| struct drm_display_mode *newmode; |
| |
| newmode = drm_mode_std(connector, drm_edid, |
| &drm_edid->edid->standard_timings[i]); |
| if (newmode) { |
| drm_mode_probed_add(connector, newmode); |
| modes++; |
| } |
| } |
| |
| if (drm_edid->edid->revision >= 1) |
| drm_for_each_detailed_block(drm_edid, do_standard_modes, |
| &closure); |
| |
| /* XXX should also look for standard codes in VTB blocks */ |
| |
| return modes + closure.modes; |
| } |
| |
| static int drm_cvt_modes(struct drm_connector *connector, |
| const struct detailed_timing *timing) |
| { |
| int i, j, modes = 0; |
| struct drm_display_mode *newmode; |
| struct drm_device *dev = connector->dev; |
| const struct cvt_timing *cvt; |
| const int rates[] = { 60, 85, 75, 60, 50 }; |
| const u8 empty[3] = { 0, 0, 0 }; |
| |
| for (i = 0; i < 4; i++) { |
| int width, height; |
| |
| cvt = &(timing->data.other_data.data.cvt[i]); |
| |
| if (!memcmp(cvt->code, empty, 3)) |
| continue; |
| |
| height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 4) + 1) * 2; |
| switch (cvt->code[1] & 0x0c) { |
| /* default - because compiler doesn't see that we've enumerated all cases */ |
| default: |
| case 0x00: |
| width = height * 4 / 3; |
| break; |
| case 0x04: |
| width = height * 16 / 9; |
| break; |
| case 0x08: |
| width = height * 16 / 10; |
| break; |
| case 0x0c: |
| width = height * 15 / 9; |
| break; |
| } |
| |
| for (j = 1; j < 5; j++) { |
| if (cvt->code[2] & (1 << j)) { |
| newmode = drm_cvt_mode(dev, width, height, |
| rates[j], j == 0, |
| false, false); |
| if (newmode) { |
| drm_mode_probed_add(connector, newmode); |
| modes++; |
| } |
| } |
| } |
| } |
| |
| return modes; |
| } |
| |
| static void |
| do_cvt_mode(const struct detailed_timing *timing, void *c) |
| { |
| struct detailed_mode_closure *closure = c; |
| |
| if (!is_display_descriptor(timing, EDID_DETAIL_CVT_3BYTE)) |
| return; |
| |
| closure->modes += drm_cvt_modes(closure->connector, timing); |
| } |
| |
| static int |
| add_cvt_modes(struct drm_connector *connector, const struct drm_edid *drm_edid) |
| { |
| struct detailed_mode_closure closure = { |
| .connector = connector, |
| .drm_edid = drm_edid, |
| }; |
| |
| if (drm_edid->edid->revision >= 3) |
| drm_for_each_detailed_block(drm_edid, do_cvt_mode, &closure); |
| |
| /* XXX should also look for CVT codes in VTB blocks */ |
| |
| return closure.modes; |
| } |
| |
| static void fixup_detailed_cea_mode_clock(struct drm_connector *connector, |
| struct drm_display_mode *mode); |
| |
| static void |
| do_detailed_mode(const struct detailed_timing *timing, void *c) |
| { |
| struct detailed_mode_closure *closure = c; |
| struct drm_display_mode *newmode; |
| |
| if (!is_detailed_timing_descriptor(timing)) |
| return; |
| |
| newmode = drm_mode_detailed(closure->connector, |
| closure->drm_edid, timing); |
| if (!newmode) |
| return; |
| |
| if (closure->preferred) |
| newmode->type |= DRM_MODE_TYPE_PREFERRED; |
| |
| /* |
| * Detailed modes are limited to 10kHz pixel clock resolution, |
| * so fix up anything that looks like CEA/HDMI mode, but the clock |
| * is just slightly off. |
| */ |
| fixup_detailed_cea_mode_clock(closure->connector, newmode); |
| |
| drm_mode_probed_add(closure->connector, newmode); |
| closure->modes++; |
| closure->preferred = false; |
| } |
| |
| /* |
| * add_detailed_modes - Add modes from detailed timings |
| * @connector: attached connector |
| * @drm_edid: EDID block to scan |
| */ |
| static int add_detailed_modes(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| struct detailed_mode_closure closure = { |
| .connector = connector, |
| .drm_edid = drm_edid, |
| }; |
| |
| if (drm_edid->edid->revision >= 4) |
| closure.preferred = true; /* first detailed timing is always preferred */ |
| else |
| closure.preferred = |
| drm_edid->edid->features & DRM_EDID_FEATURE_PREFERRED_TIMING; |
| |
| drm_for_each_detailed_block(drm_edid, do_detailed_mode, &closure); |
| |
| return closure.modes; |
| } |
| |
| /* CTA-861-H Table 60 - CTA Tag Codes */ |
| #define CTA_DB_AUDIO 1 |
| #define CTA_DB_VIDEO 2 |
| #define CTA_DB_VENDOR 3 |
| #define CTA_DB_SPEAKER 4 |
| #define CTA_DB_EXTENDED_TAG 7 |
| |
| /* CTA-861-H Table 62 - CTA Extended Tag Codes */ |
| #define CTA_EXT_DB_VIDEO_CAP 0 |
| #define CTA_EXT_DB_VENDOR 1 |
| #define CTA_EXT_DB_HDR_STATIC_METADATA 6 |
| #define CTA_EXT_DB_420_VIDEO_DATA 14 |
| #define CTA_EXT_DB_420_VIDEO_CAP_MAP 15 |
| #define CTA_EXT_DB_HF_EEODB 0x78 |
| #define CTA_EXT_DB_HF_SCDB 0x79 |
| |
| #define EDID_BASIC_AUDIO (1 << 6) |
| #define EDID_CEA_YCRCB444 (1 << 5) |
| #define EDID_CEA_YCRCB422 (1 << 4) |
| #define EDID_CEA_VCDB_QS (1 << 6) |
| |
| /* |
| * Search EDID for CEA extension block. |
| * |
| * FIXME: Prefer not returning pointers to raw EDID data. |
| */ |
| const u8 *drm_find_edid_extension(const struct drm_edid *drm_edid, |
| int ext_id, int *ext_index) |
| { |
| const u8 *edid_ext = NULL; |
| int i; |
| |
| /* No EDID or EDID extensions */ |
| if (!drm_edid || !drm_edid_extension_block_count(drm_edid)) |
| return NULL; |
| |
| /* Find CEA extension */ |
| for (i = *ext_index; i < drm_edid_extension_block_count(drm_edid); i++) { |
| edid_ext = drm_edid_extension_block_data(drm_edid, i); |
| if (edid_block_tag(edid_ext) == ext_id) |
| break; |
| } |
| |
| if (i >= drm_edid_extension_block_count(drm_edid)) |
| return NULL; |
| |
| *ext_index = i + 1; |
| |
| return edid_ext; |
| } |
| |
| /* Return true if the EDID has a CTA extension or a DisplayID CTA data block */ |
| static bool drm_edid_has_cta_extension(const struct drm_edid *drm_edid) |
| { |
| const struct displayid_block *block; |
| struct displayid_iter iter; |
| int ext_index = 0; |
| bool found = false; |
| |
| /* Look for a top level CEA extension block */ |
| if (drm_find_edid_extension(drm_edid, CEA_EXT, &ext_index)) |
| return true; |
| |
| /* CEA blocks can also be found embedded in a DisplayID block */ |
| displayid_iter_edid_begin(drm_edid, &iter); |
| displayid_iter_for_each(block, &iter) { |
| if (block->tag == DATA_BLOCK_CTA) { |
| found = true; |
| break; |
| } |
| } |
| displayid_iter_end(&iter); |
| |
| return found; |
| } |
| |
| static __always_inline const struct drm_display_mode *cea_mode_for_vic(u8 vic) |
| { |
| BUILD_BUG_ON(1 + ARRAY_SIZE(edid_cea_modes_1) - 1 != 127); |
| BUILD_BUG_ON(193 + ARRAY_SIZE(edid_cea_modes_193) - 1 != 219); |
| |
| if (vic >= 1 && vic < 1 + ARRAY_SIZE(edid_cea_modes_1)) |
| return &edid_cea_modes_1[vic - 1]; |
| if (vic >= 193 && vic < 193 + ARRAY_SIZE(edid_cea_modes_193)) |
| return &edid_cea_modes_193[vic - 193]; |
| return NULL; |
| } |
| |
| static u8 cea_num_vics(void) |
| { |
| return 193 + ARRAY_SIZE(edid_cea_modes_193); |
| } |
| |
| static u8 cea_next_vic(u8 vic) |
| { |
| if (++vic == 1 + ARRAY_SIZE(edid_cea_modes_1)) |
| vic = 193; |
| return vic; |
| } |
| |
| /* |
| * Calculate the alternate clock for the CEA mode |
| * (60Hz vs. 59.94Hz etc.) |
| */ |
| static unsigned int |
| cea_mode_alternate_clock(const struct drm_display_mode *cea_mode) |
| { |
| unsigned int clock = cea_mode->clock; |
| |
| if (drm_mode_vrefresh(cea_mode) % 6 != 0) |
| return clock; |
| |
| /* |
| * edid_cea_modes contains the 59.94Hz |
| * variant for 240 and 480 line modes, |
| * and the 60Hz variant otherwise. |
| */ |
| if (cea_mode->vdisplay == 240 || cea_mode->vdisplay == 480) |
| clock = DIV_ROUND_CLOSEST(clock * 1001, 1000); |
| else |
| clock = DIV_ROUND_CLOSEST(clock * 1000, 1001); |
| |
| return clock; |
| } |
| |
| static bool |
| cea_mode_alternate_timings(u8 vic, struct drm_display_mode *mode) |
| { |
| /* |
| * For certain VICs the spec allows the vertical |
| * front porch to vary by one or two lines. |
| * |
| * cea_modes[] stores the variant with the shortest |
| * vertical front porch. We can adjust the mode to |
| * get the other variants by simply increasing the |
| * vertical front porch length. |
| */ |
| BUILD_BUG_ON(cea_mode_for_vic(8)->vtotal != 262 || |
| cea_mode_for_vic(9)->vtotal != 262 || |
| cea_mode_for_vic(12)->vtotal != 262 || |
| cea_mode_for_vic(13)->vtotal != 262 || |
| cea_mode_for_vic(23)->vtotal != 312 || |
| cea_mode_for_vic(24)->vtotal != 312 || |
| cea_mode_for_vic(27)->vtotal != 312 || |
| cea_mode_for_vic(28)->vtotal != 312); |
| |
| if (((vic == 8 || vic == 9 || |
| vic == 12 || vic == 13) && mode->vtotal < 263) || |
| ((vic == 23 || vic == 24 || |
| vic == 27 || vic == 28) && mode->vtotal < 314)) { |
| mode->vsync_start++; |
| mode->vsync_end++; |
| mode->vtotal++; |
| |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static u8 drm_match_cea_mode_clock_tolerance(const struct drm_display_mode *to_match, |
| unsigned int clock_tolerance) |
| { |
| unsigned int match_flags = DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS; |
| u8 vic; |
| |
| if (!to_match->clock) |
| return 0; |
| |
| if (to_match->picture_aspect_ratio) |
| match_flags |= DRM_MODE_MATCH_ASPECT_RATIO; |
| |
| for (vic = 1; vic < cea_num_vics(); vic = cea_next_vic(vic)) { |
| struct drm_display_mode cea_mode; |
| unsigned int clock1, clock2; |
| |
| drm_mode_init(&cea_mode, cea_mode_for_vic(vic)); |
| |
| /* Check both 60Hz and 59.94Hz */ |
| clock1 = cea_mode.clock; |
| clock2 = cea_mode_alternate_clock(&cea_mode); |
| |
| if (abs(to_match->clock - clock1) > clock_tolerance && |
| abs(to_match->clock - clock2) > clock_tolerance) |
| continue; |
| |
| do { |
| if (drm_mode_match(to_match, &cea_mode, match_flags)) |
| return vic; |
| } while (cea_mode_alternate_timings(vic, &cea_mode)); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * drm_match_cea_mode - look for a CEA mode matching given mode |
| * @to_match: display mode |
| * |
| * Return: The CEA Video ID (VIC) of the mode or 0 if it isn't a CEA-861 |
| * mode. |
| */ |
| u8 drm_match_cea_mode(const struct drm_display_mode *to_match) |
| { |
| unsigned int match_flags = DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS; |
| u8 vic; |
| |
| if (!to_match->clock) |
| return 0; |
| |
| if (to_match->picture_aspect_ratio) |
| match_flags |= DRM_MODE_MATCH_ASPECT_RATIO; |
| |
| for (vic = 1; vic < cea_num_vics(); vic = cea_next_vic(vic)) { |
| struct drm_display_mode cea_mode; |
| unsigned int clock1, clock2; |
| |
| drm_mode_init(&cea_mode, cea_mode_for_vic(vic)); |
| |
| /* Check both 60Hz and 59.94Hz */ |
| clock1 = cea_mode.clock; |
| clock2 = cea_mode_alternate_clock(&cea_mode); |
| |
| if (KHZ2PICOS(to_match->clock) != KHZ2PICOS(clock1) && |
| KHZ2PICOS(to_match->clock) != KHZ2PICOS(clock2)) |
| continue; |
| |
| do { |
| if (drm_mode_match(to_match, &cea_mode, match_flags)) |
| return vic; |
| } while (cea_mode_alternate_timings(vic, &cea_mode)); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(drm_match_cea_mode); |
| |
| static bool drm_valid_cea_vic(u8 vic) |
| { |
| return cea_mode_for_vic(vic) != NULL; |
| } |
| |
| static enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code) |
| { |
| const struct drm_display_mode *mode = cea_mode_for_vic(video_code); |
| |
| if (mode) |
| return mode->picture_aspect_ratio; |
| |
| return HDMI_PICTURE_ASPECT_NONE; |
| } |
| |
| static enum hdmi_picture_aspect drm_get_hdmi_aspect_ratio(const u8 video_code) |
| { |
| return edid_4k_modes[video_code].picture_aspect_ratio; |
| } |
| |
| /* |
| * Calculate the alternate clock for HDMI modes (those from the HDMI vendor |
| * specific block). |
| */ |
| static unsigned int |
| hdmi_mode_alternate_clock(const struct drm_display_mode *hdmi_mode) |
| { |
| return cea_mode_alternate_clock(hdmi_mode); |
| } |
| |
| static u8 drm_match_hdmi_mode_clock_tolerance(const struct drm_display_mode *to_match, |
| unsigned int clock_tolerance) |
| { |
| unsigned int match_flags = DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS; |
| u8 vic; |
| |
| if (!to_match->clock) |
| return 0; |
| |
| if (to_match->picture_aspect_ratio) |
| match_flags |= DRM_MODE_MATCH_ASPECT_RATIO; |
| |
| for (vic = 1; vic < ARRAY_SIZE(edid_4k_modes); vic++) { |
| const struct drm_display_mode *hdmi_mode = &edid_4k_modes[vic]; |
| unsigned int clock1, clock2; |
| |
| /* Make sure to also match alternate clocks */ |
| clock1 = hdmi_mode->clock; |
| clock2 = hdmi_mode_alternate_clock(hdmi_mode); |
| |
| if (abs(to_match->clock - clock1) > clock_tolerance && |
| abs(to_match->clock - clock2) > clock_tolerance) |
| continue; |
| |
| if (drm_mode_match(to_match, hdmi_mode, match_flags)) |
| return vic; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * drm_match_hdmi_mode - look for a HDMI mode matching given mode |
| * @to_match: display mode |
| * |
| * An HDMI mode is one defined in the HDMI vendor specific block. |
| * |
| * Returns the HDMI Video ID (VIC) of the mode or 0 if it isn't one. |
| */ |
| static u8 drm_match_hdmi_mode(const struct drm_display_mode *to_match) |
| { |
| unsigned int match_flags = DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS; |
| u8 vic; |
| |
| if (!to_match->clock) |
| return 0; |
| |
| if (to_match->picture_aspect_ratio) |
| match_flags |= DRM_MODE_MATCH_ASPECT_RATIO; |
| |
| for (vic = 1; vic < ARRAY_SIZE(edid_4k_modes); vic++) { |
| const struct drm_display_mode *hdmi_mode = &edid_4k_modes[vic]; |
| unsigned int clock1, clock2; |
| |
| /* Make sure to also match alternate clocks */ |
| clock1 = hdmi_mode->clock; |
| clock2 = hdmi_mode_alternate_clock(hdmi_mode); |
| |
| if ((KHZ2PICOS(to_match->clock) == KHZ2PICOS(clock1) || |
| KHZ2PICOS(to_match->clock) == KHZ2PICOS(clock2)) && |
| drm_mode_match(to_match, hdmi_mode, match_flags)) |
| return vic; |
| } |
| return 0; |
| } |
| |
| static bool drm_valid_hdmi_vic(u8 vic) |
| { |
| return vic > 0 && vic < ARRAY_SIZE(edid_4k_modes); |
| } |
| |
| static int add_alternate_cea_modes(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| struct drm_device *dev = connector->dev; |
| struct drm_display_mode *mode, *tmp; |
| LIST_HEAD(list); |
| int modes = 0; |
| |
| /* Don't add CTA modes if the CTA extension block is missing */ |
| if (!drm_edid_has_cta_extension(drm_edid)) |
| return 0; |
| |
| /* |
| * Go through all probed modes and create a new mode |
| * with the alternate clock for certain CEA modes. |
| */ |
| list_for_each_entry(mode, &connector->probed_modes, head) { |
| const struct drm_display_mode *cea_mode = NULL; |
| struct drm_display_mode *newmode; |
| u8 vic = drm_match_cea_mode(mode); |
| unsigned int clock1, clock2; |
| |
| if (drm_valid_cea_vic(vic)) { |
| cea_mode = cea_mode_for_vic(vic); |
| clock2 = cea_mode_alternate_clock(cea_mode); |
| } else { |
| vic = drm_match_hdmi_mode(mode); |
| if (drm_valid_hdmi_vic(vic)) { |
| cea_mode = &edid_4k_modes[vic]; |
| clock2 = hdmi_mode_alternate_clock(cea_mode); |
| } |
| } |
| |
| if (!cea_mode) |
| continue; |
| |
| clock1 = cea_mode->clock; |
| |
| if (clock1 == clock2) |
| continue; |
| |
| if (mode->clock != clock1 && mode->clock != clock2) |
| continue; |
| |
| newmode = drm_mode_duplicate(dev, cea_mode); |
| if (!newmode) |
| continue; |
| |
| /* Carry over the stereo flags */ |
| newmode->flags |= mode->flags & DRM_MODE_FLAG_3D_MASK; |
| |
| /* |
| * The current mode could be either variant. Make |
| * sure to pick the "other" clock for the new mode. |
| */ |
| if (mode->clock != clock1) |
| newmode->clock = clock1; |
| else |
| newmode->clock = clock2; |
| |
| list_add_tail(&newmode->head, &list); |
| } |
| |
| list_for_each_entry_safe(mode, tmp, &list, head) { |
| list_del(&mode->head); |
| drm_mode_probed_add(connector, mode); |
| modes++; |
| } |
| |
| return modes; |
| } |
| |
| static u8 svd_to_vic(u8 svd) |
| { |
| /* 0-6 bit vic, 7th bit native mode indicator */ |
| if ((svd >= 1 && svd <= 64) || (svd >= 129 && svd <= 192)) |
| return svd & 127; |
| |
| return svd; |
| } |
| |
| /* |
| * Return a display mode for the 0-based vic_index'th VIC across all CTA VDBs in |
| * the EDID, or NULL on errors. |
| */ |
| static struct drm_display_mode * |
| drm_display_mode_from_vic_index(struct drm_connector *connector, int vic_index) |
| { |
| const struct drm_display_info *info = &connector->display_info; |
| struct drm_device *dev = connector->dev; |
| |
| if (!info->vics || vic_index >= info->vics_len || !info->vics[vic_index]) |
| return NULL; |
| |
| return drm_display_mode_from_cea_vic(dev, info->vics[vic_index]); |
| } |
| |
| /* |
| * do_y420vdb_modes - Parse YCBCR 420 only modes |
| * @connector: connector corresponding to the HDMI sink |
| * @svds: start of the data block of CEA YCBCR 420 VDB |
| * @len: length of the CEA YCBCR 420 VDB |
| * |
| * Parse the CEA-861-F YCBCR 420 Video Data Block (Y420VDB) |
| * which contains modes which can be supported in YCBCR 420 |
| * output format only. |
| */ |
| static int do_y420vdb_modes(struct drm_connector *connector, |
| const u8 *svds, u8 svds_len) |
| { |
| struct drm_device *dev = connector->dev; |
| int modes = 0, i; |
| |
| for (i = 0; i < svds_len; i++) { |
| u8 vic = svd_to_vic(svds[i]); |
| struct drm_display_mode *newmode; |
| |
| if (!drm_valid_cea_vic(vic)) |
| continue; |
| |
| newmode = drm_mode_duplicate(dev, cea_mode_for_vic(vic)); |
| if (!newmode) |
| break; |
| drm_mode_probed_add(connector, newmode); |
| modes++; |
| } |
| |
| return modes; |
| } |
| |
| /** |
| * drm_display_mode_from_cea_vic() - return a mode for CEA VIC |
| * @dev: DRM device |
| * @video_code: CEA VIC of the mode |
| * |
| * Creates a new mode matching the specified CEA VIC. |
| * |
| * Returns: A new drm_display_mode on success or NULL on failure |
| */ |
| struct drm_display_mode * |
| drm_display_mode_from_cea_vic(struct drm_device *dev, |
| u8 video_code) |
| { |
| const struct drm_display_mode *cea_mode; |
| struct drm_display_mode *newmode; |
| |
| cea_mode = cea_mode_for_vic(video_code); |
| if (!cea_mode) |
| return NULL; |
| |
| newmode = drm_mode_duplicate(dev, cea_mode); |
| if (!newmode) |
| return NULL; |
| |
| return newmode; |
| } |
| EXPORT_SYMBOL(drm_display_mode_from_cea_vic); |
| |
| /* Add modes based on VICs parsed in parse_cta_vdb() */ |
| static int add_cta_vdb_modes(struct drm_connector *connector) |
| { |
| const struct drm_display_info *info = &connector->display_info; |
| int i, modes = 0; |
| |
| if (!info->vics) |
| return 0; |
| |
| for (i = 0; i < info->vics_len; i++) { |
| struct drm_display_mode *mode; |
| |
| mode = drm_display_mode_from_vic_index(connector, i); |
| if (mode) { |
| drm_mode_probed_add(connector, mode); |
| modes++; |
| } |
| } |
| |
| return modes; |
| } |
| |
| struct stereo_mandatory_mode { |
| int width, height, vrefresh; |
| unsigned int flags; |
| }; |
| |
| static const struct stereo_mandatory_mode stereo_mandatory_modes[] = { |
| { 1920, 1080, 24, DRM_MODE_FLAG_3D_TOP_AND_BOTTOM }, |
| { 1920, 1080, 24, DRM_MODE_FLAG_3D_FRAME_PACKING }, |
| { 1920, 1080, 50, |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF }, |
| { 1920, 1080, 60, |
| DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF }, |
| { 1280, 720, 50, DRM_MODE_FLAG_3D_TOP_AND_BOTTOM }, |
| { 1280, 720, 50, DRM_MODE_FLAG_3D_FRAME_PACKING }, |
| { 1280, 720, 60, DRM_MODE_FLAG_3D_TOP_AND_BOTTOM }, |
| { 1280, 720, 60, DRM_MODE_FLAG_3D_FRAME_PACKING } |
| }; |
| |
| static bool |
| stereo_match_mandatory(const struct drm_display_mode *mode, |
| const struct stereo_mandatory_mode *stereo_mode) |
| { |
| unsigned int interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE; |
| |
| return mode->hdisplay == stereo_mode->width && |
| mode->vdisplay == stereo_mode->height && |
| interlaced == (stereo_mode->flags & DRM_MODE_FLAG_INTERLACE) && |
| drm_mode_vrefresh(mode) == stereo_mode->vrefresh; |
| } |
| |
| static int add_hdmi_mandatory_stereo_modes(struct drm_connector *connector) |
| { |
| struct drm_device *dev = connector->dev; |
| const struct drm_display_mode *mode; |
| struct list_head stereo_modes; |
| int modes = 0, i; |
| |
| INIT_LIST_HEAD(&stereo_modes); |
| |
| list_for_each_entry(mode, &connector->probed_modes, head) { |
| for (i = 0; i < ARRAY_SIZE(stereo_mandatory_modes); i++) { |
| const struct stereo_mandatory_mode *mandatory; |
| struct drm_display_mode *new_mode; |
| |
| if (!stereo_match_mandatory(mode, |
| &stereo_mandatory_modes[i])) |
| continue; |
| |
| mandatory = &stereo_mandatory_modes[i]; |
| new_mode = drm_mode_duplicate(dev, mode); |
| if (!new_mode) |
| continue; |
| |
| new_mode->flags |= mandatory->flags; |
| list_add_tail(&new_mode->head, &stereo_modes); |
| modes++; |
| } |
| } |
| |
| list_splice_tail(&stereo_modes, &connector->probed_modes); |
| |
| return modes; |
| } |
| |
| static int add_hdmi_mode(struct drm_connector *connector, u8 vic) |
| { |
| struct drm_device *dev = connector->dev; |
| struct drm_display_mode *newmode; |
| |
| if (!drm_valid_hdmi_vic(vic)) { |
| drm_err(connector->dev, "[CONNECTOR:%d:%s] Unknown HDMI VIC: %d\n", |
| connector->base.id, connector->name, vic); |
| return 0; |
| } |
| |
| newmode = drm_mode_duplicate(dev, &edid_4k_modes[vic]); |
| if (!newmode) |
| return 0; |
| |
| drm_mode_probed_add(connector, newmode); |
| |
| return 1; |
| } |
| |
| static int add_3d_struct_modes(struct drm_connector *connector, u16 structure, |
| int vic_index) |
| { |
| struct drm_display_mode *newmode; |
| int modes = 0; |
| |
| if (structure & (1 << 0)) { |
| newmode = drm_display_mode_from_vic_index(connector, vic_index); |
| if (newmode) { |
| newmode->flags |= DRM_MODE_FLAG_3D_FRAME_PACKING; |
| drm_mode_probed_add(connector, newmode); |
| modes++; |
| } |
| } |
| if (structure & (1 << 6)) { |
| newmode = drm_display_mode_from_vic_index(connector, vic_index); |
| if (newmode) { |
| newmode->flags |= DRM_MODE_FLAG_3D_TOP_AND_BOTTOM; |
| drm_mode_probed_add(connector, newmode); |
| modes++; |
| } |
| } |
| if (structure & (1 << 8)) { |
| newmode = drm_display_mode_from_vic_index(connector, vic_index); |
| if (newmode) { |
| newmode->flags |= DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF; |
| drm_mode_probed_add(connector, newmode); |
| modes++; |
| } |
| } |
| |
| return modes; |
| } |
| |
| static bool hdmi_vsdb_latency_present(const u8 *db) |
| { |
| return db[8] & BIT(7); |
| } |
| |
| static bool hdmi_vsdb_i_latency_present(const u8 *db) |
| { |
| return hdmi_vsdb_latency_present(db) && db[8] & BIT(6); |
| } |
| |
| static int hdmi_vsdb_latency_length(const u8 *db) |
| { |
| if (hdmi_vsdb_i_latency_present(db)) |
| return 4; |
| else if (hdmi_vsdb_latency_present(db)) |
| return 2; |
| else |
| return 0; |
| } |
| |
| /* |
| * do_hdmi_vsdb_modes - Parse the HDMI Vendor Specific data block |
| * @connector: connector corresponding to the HDMI sink |
| * @db: start of the CEA vendor specific block |
| * @len: length of the CEA block payload, ie. one can access up to db[len] |
| * |
| * Parses the HDMI VSDB looking for modes to add to @connector. This function |
| * also adds the stereo 3d modes when applicable. |
| */ |
| static int |
| do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len) |
| { |
| int modes = 0, offset = 0, i, multi_present = 0, multi_len; |
| u8 vic_len, hdmi_3d_len = 0; |
| u16 mask; |
| u16 structure_all; |
| |
| if (len < 8) |
| goto out; |
| |
| /* no HDMI_Video_Present */ |
| if (!(db[8] & (1 << 5))) |
| goto out; |
| |
| offset += hdmi_vsdb_latency_length(db); |
| |
| /* the declared length is not long enough for the 2 first bytes |
| * of additional video format capabilities */ |
| if (len < (8 + offset + 2)) |
| goto out; |
| |
| /* 3D_Present */ |
| offset++; |
| if (db[8 + offset] & (1 << 7)) { |
| modes += add_hdmi_mandatory_stereo_modes(connector); |
| |
| /* 3D_Multi_present */ |
| multi_present = (db[8 + offset] & 0x60) >> 5; |
| } |
| |
| offset++; |
| vic_len = db[8 + offset] >> 5; |
| hdmi_3d_len = db[8 + offset] & 0x1f; |
| |
| for (i = 0; i < vic_len && len >= (9 + offset + i); i++) { |
| u8 vic; |
| |
| vic = db[9 + offset + i]; |
| modes += add_hdmi_mode(connector, vic); |
| } |
| offset += 1 + vic_len; |
| |
| if (multi_present == 1) |
| multi_len = 2; |
| else if (multi_present == 2) |
| multi_len = 4; |
| else |
| multi_len = 0; |
| |
| if (len < (8 + offset + hdmi_3d_len - 1)) |
| goto out; |
| |
| if (hdmi_3d_len < multi_len) |
| goto out; |
| |
| if (multi_present == 1 || multi_present == 2) { |
| /* 3D_Structure_ALL */ |
| structure_all = (db[8 + offset] << 8) | db[9 + offset]; |
| |
| /* check if 3D_MASK is present */ |
| if (multi_present == 2) |
| mask = (db[10 + offset] << 8) | db[11 + offset]; |
| else |
| mask = 0xffff; |
| |
| for (i = 0; i < 16; i++) { |
| if (mask & (1 << i)) |
| modes += add_3d_struct_modes(connector, |
| structure_all, i); |
| } |
| } |
| |
| offset += multi_len; |
| |
| for (i = 0; i < (hdmi_3d_len - multi_len); i++) { |
| int vic_index; |
| struct drm_display_mode *newmode = NULL; |
| unsigned int newflag = 0; |
| bool detail_present; |
| |
| detail_present = ((db[8 + offset + i] & 0x0f) > 7); |
| |
| if (detail_present && (i + 1 == hdmi_3d_len - multi_len)) |
| break; |
| |
| /* 2D_VIC_order_X */ |
| vic_index = db[8 + offset + i] >> 4; |
| |
| /* 3D_Structure_X */ |
| switch (db[8 + offset + i] & 0x0f) { |
| case 0: |
| newflag = DRM_MODE_FLAG_3D_FRAME_PACKING; |
| break; |
| case 6: |
| newflag = DRM_MODE_FLAG_3D_TOP_AND_BOTTOM; |
| break; |
| case 8: |
| /* 3D_Detail_X */ |
| if ((db[9 + offset + i] >> 4) == 1) |
| newflag = DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF; |
| break; |
| } |
| |
| if (newflag != 0) { |
| newmode = drm_display_mode_from_vic_index(connector, |
| vic_index); |
| |
| if (newmode) { |
| newmode->flags |= newflag; |
| drm_mode_probed_add(connector, newmode); |
| modes++; |
| } |
| } |
| |
| if (detail_present) |
| i++; |
| } |
| |
| out: |
| return modes; |
| } |
| |
| static int |
| cea_revision(const u8 *cea) |
| { |
| /* |
| * FIXME is this correct for the DispID variant? |
| * The DispID spec doesn't really specify whether |
| * this is the revision of the CEA extension or |
| * the DispID CEA data block. And the only value |
| * given as an example is 0. |
| */ |
| return cea[1]; |
| } |
| |
| /* |
| * CTA Data Block iterator. |
| * |
| * Iterate through all CTA Data Blocks in both EDID CTA Extensions and DisplayID |
| * CTA Data Blocks. |
| * |
| * struct cea_db *db: |
| * struct cea_db_iter iter; |
| * |
| * cea_db_iter_edid_begin(edid, &iter); |
| * cea_db_iter_for_each(db, &iter) { |
| * // do stuff with db |
| * } |
| * cea_db_iter_end(&iter); |
| */ |
| struct cea_db_iter { |
| struct drm_edid_iter edid_iter; |
| struct displayid_iter displayid_iter; |
| |
| /* Current Data Block Collection. */ |
| const u8 *collection; |
| |
| /* Current Data Block index in current collection. */ |
| int index; |
| |
| /* End index in current collection. */ |
| int end; |
| }; |
| |
| /* CTA-861-H section 7.4 CTA Data BLock Collection */ |
| struct cea_db { |
| u8 tag_length; |
| u8 data[]; |
| } __packed; |
| |
| static int cea_db_tag(const struct cea_db *db) |
| { |
| return db->tag_length >> 5; |
| } |
| |
| static int cea_db_payload_len(const void *_db) |
| { |
| /* FIXME: Transition to passing struct cea_db * everywhere. */ |
| const struct cea_db *db = _db; |
| |
| return db->tag_length & 0x1f; |
| } |
| |
| static const void *cea_db_data(const struct cea_db *db) |
| { |
| return db->data; |
| } |
| |
| static bool cea_db_is_extended_tag(const struct cea_db *db, int tag) |
| { |
| return cea_db_tag(db) == CTA_DB_EXTENDED_TAG && |
| cea_db_payload_len(db) >= 1 && |
| db->data[0] == tag; |
| } |
| |
| static bool cea_db_is_vendor(const struct cea_db *db, int vendor_oui) |
| { |
| const u8 *data = cea_db_data(db); |
| |
| return cea_db_tag(db) == CTA_DB_VENDOR && |
| cea_db_payload_len(db) >= 3 && |
| oui(data[2], data[1], data[0]) == vendor_oui; |
| } |
| |
| static void cea_db_iter_edid_begin(const struct drm_edid *drm_edid, |
| struct cea_db_iter *iter) |
| { |
| memset(iter, 0, sizeof(*iter)); |
| |
| drm_edid_iter_begin(drm_edid, &iter->edid_iter); |
| displayid_iter_edid_begin(drm_edid, &iter->displayid_iter); |
| } |
| |
| static const struct cea_db * |
| __cea_db_iter_current_block(const struct cea_db_iter *iter) |
| { |
| const struct cea_db *db; |
| |
| if (!iter->collection) |
| return NULL; |
| |
| db = (const struct cea_db *)&iter->collection[iter->index]; |
| |
| if (iter->index + sizeof(*db) <= iter->end && |
| iter->index + sizeof(*db) + cea_db_payload_len(db) <= iter->end) |
| return db; |
| |
| return NULL; |
| } |
| |
| /* |
| * References: |
| * - CTA-861-H section 7.3.3 CTA Extension Version 3 |
| */ |
| static int cea_db_collection_size(const u8 *cta) |
| { |
| u8 d = cta[2]; |
| |
| if (d < 4 || d > 127) |
| return 0; |
| |
| return d - 4; |
| } |
| |
| /* |
| * References: |
| * - VESA E-EDID v1.4 |
| * - CTA-861-H section 7.3.3 CTA Extension Version 3 |
| */ |
| static const void *__cea_db_iter_edid_next(struct cea_db_iter *iter) |
| { |
| const u8 *ext; |
| |
| drm_edid_iter_for_each(ext, &iter->edid_iter) { |
| int size; |
| |
| /* Only support CTA Extension revision 3+ */ |
| if (ext[0] != CEA_EXT || cea_revision(ext) < 3) |
| continue; |
| |
| size = cea_db_collection_size(ext); |
| if (!size) |
| continue; |
| |
| iter->index = 4; |
| iter->end = iter->index + size; |
| |
| return ext; |
| } |
| |
| return NULL; |
| } |
| |
| /* |
| * References: |
| * - DisplayID v1.3 Appendix C: CEA Data Block within a DisplayID Data Block |
| * - DisplayID v2.0 section 4.10 CTA DisplayID Data Block |
| * |
| * Note that the above do not specify any connection between DisplayID Data |
| * Block revision and CTA Extension versions. |
| */ |
| static const void *__cea_db_iter_displayid_next(struct cea_db_iter *iter) |
| { |
| const struct displayid_block *block; |
| |
| displayid_iter_for_each(block, &iter->displayid_iter) { |
| if (block->tag != DATA_BLOCK_CTA) |
| continue; |
| |
| /* |
| * The displayid iterator has already verified the block bounds |
| * in displayid_iter_block(). |
| */ |
| iter->index = sizeof(*block); |
| iter->end = iter->index + block->num_bytes; |
| |
| return block; |
| } |
| |
| return NULL; |
| } |
| |
| static const struct cea_db *__cea_db_iter_next(struct cea_db_iter *iter) |
| { |
| const struct cea_db *db; |
| |
| if (iter->collection) { |
| /* Current collection should always be valid. */ |
| db = __cea_db_iter_current_block(iter); |
| if (WARN_ON(!db)) { |
| iter->collection = NULL; |
| return NULL; |
| } |
| |
| /* Next block in CTA Data Block Collection */ |
| iter->index += sizeof(*db) + cea_db_payload_len(db); |
| |
| db = __cea_db_iter_current_block(iter); |
| if (db) |
| return db; |
| } |
| |
| for (;;) { |
| /* |
| * Find the next CTA Data Block Collection. First iterate all |
| * the EDID CTA Extensions, then all the DisplayID CTA blocks. |
| * |
| * Per DisplayID v1.3 Appendix B: DisplayID as an EDID |
| * Extension, it's recommended that DisplayID extensions are |
| * exposed after all of the CTA Extensions. |
| */ |
| iter->collection = __cea_db_iter_edid_next(iter); |
| if (!iter->collection) |
| iter->collection = __cea_db_iter_displayid_next(iter); |
| |
| if (!iter->collection) |
| return NULL; |
| |
| db = __cea_db_iter_current_block(iter); |
| if (db) |
| return db; |
| } |
| } |
| |
| #define cea_db_iter_for_each(__db, __iter) \ |
| while (((__db) = __cea_db_iter_next(__iter))) |
| |
| static void cea_db_iter_end(struct cea_db_iter *iter) |
| { |
| displayid_iter_end(&iter->displayid_iter); |
| drm_edid_iter_end(&iter->edid_iter); |
| |
| memset(iter, 0, sizeof(*iter)); |
| } |
| |
| static bool cea_db_is_hdmi_vsdb(const struct cea_db *db) |
| { |
| return cea_db_is_vendor(db, HDMI_IEEE_OUI) && |
| cea_db_payload_len(db) >= 5; |
| } |
| |
| static bool cea_db_is_hdmi_forum_vsdb(const struct cea_db *db) |
| { |
| return cea_db_is_vendor(db, HDMI_FORUM_IEEE_OUI) && |
| cea_db_payload_len(db) >= 7; |
| } |
| |
| static bool cea_db_is_hdmi_forum_eeodb(const void *db) |
| { |
| return cea_db_is_extended_tag(db, CTA_EXT_DB_HF_EEODB) && |
| cea_db_payload_len(db) >= 2; |
| } |
| |
| static bool cea_db_is_microsoft_vsdb(const struct cea_db *db) |
| { |
| return cea_db_is_vendor(db, MICROSOFT_IEEE_OUI) && |
| cea_db_payload_len(db) == 21; |
| } |
| |
| static bool cea_db_is_vcdb(const struct cea_db *db) |
| { |
| return cea_db_is_extended_tag(db, CTA_EXT_DB_VIDEO_CAP) && |
| cea_db_payload_len(db) == 2; |
| } |
| |
| static bool cea_db_is_hdmi_forum_scdb(const struct cea_db *db) |
| { |
| return cea_db_is_extended_tag(db, CTA_EXT_DB_HF_SCDB) && |
| cea_db_payload_len(db) >= 7; |
| } |
| |
| static bool cea_db_is_y420cmdb(const struct cea_db *db) |
| { |
| return cea_db_is_extended_tag(db, CTA_EXT_DB_420_VIDEO_CAP_MAP); |
| } |
| |
| static bool cea_db_is_y420vdb(const struct cea_db *db) |
| { |
| return cea_db_is_extended_tag(db, CTA_EXT_DB_420_VIDEO_DATA); |
| } |
| |
| static bool cea_db_is_hdmi_hdr_metadata_block(const struct cea_db *db) |
| { |
| return cea_db_is_extended_tag(db, CTA_EXT_DB_HDR_STATIC_METADATA) && |
| cea_db_payload_len(db) >= 3; |
| } |
| |
| /* |
| * Get the HF-EEODB override extension block count from EDID. |
| * |
| * The passed in EDID may be partially read, as long as it has at least two |
| * blocks (base block and one extension block) if EDID extension count is > 0. |
| * |
| * Note that this is *not* how you should parse CTA Data Blocks in general; this |
| * is only to handle partially read EDIDs. Normally, use the CTA Data Block |
| * iterators instead. |
| * |
| * References: |
| * - HDMI 2.1 section 10.3.6 HDMI Forum EDID Extension Override Data Block |
| */ |
| static int edid_hfeeodb_extension_block_count(const struct edid *edid) |
| { |
| const u8 *cta; |
| |
| /* No extensions according to base block, no HF-EEODB. */ |
| if (!edid_extension_block_count(edid)) |
| return 0; |
| |
| /* HF-EEODB is always in the first EDID extension block only */ |
| cta = edid_extension_block_data(edid, 0); |
| if (edid_block_tag(cta) != CEA_EXT || cea_revision(cta) < 3) |
| return 0; |
| |
| /* Need to have the data block collection, and at least 3 bytes. */ |
| if (cea_db_collection_size(cta) < 3) |
| return 0; |
| |
| /* |
| * Sinks that include the HF-EEODB in their E-EDID shall include one and |
| * only one instance of the HF-EEODB in the E-EDID, occupying bytes 4 |
| * through 6 of Block 1 of the E-EDID. |
| */ |
| if (!cea_db_is_hdmi_forum_eeodb(&cta[4])) |
| return 0; |
| |
| return cta[4 + 2]; |
| } |
| |
| /* |
| * CTA-861 YCbCr 4:2:0 Capability Map Data Block (CTA Y420CMDB) |
| * |
| * Y420CMDB contains a bitmap which gives the index of CTA modes from CTA VDB, |
| * which can support YCBCR 420 sampling output also (apart from RGB/YCBCR444 |
| * etc). For example, if the bit 0 in bitmap is set, first mode in VDB can |
| * support YCBCR420 output too. |
| */ |
| static void parse_cta_y420cmdb(struct drm_connector *connector, |
| const struct cea_db *db, u64 *y420cmdb_map) |
| { |
| struct drm_display_info *info = &connector->display_info; |
| int i, map_len = cea_db_payload_len(db) - 1; |
| const u8 *data = cea_db_data(db) + 1; |
| u64 map = 0; |
| |
| if (map_len == 0) { |
| /* All CEA modes support ycbcr420 sampling also.*/ |
| map = U64_MAX; |
| goto out; |
| } |
| |
| /* |
| * This map indicates which of the existing CEA block modes |
| * from VDB can support YCBCR420 output too. So if bit=0 is |
| * set, first mode from VDB can support YCBCR420 output too. |
| * We will parse and keep this map, before parsing VDB itself |
| * to avoid going through the same block again and again. |
| * |
| * Spec is not clear about max possible size of this block. |
| * Clamping max bitmap block size at 8 bytes. Every byte can |
| * address 8 CEA modes, in this way this map can address |
| * 8*8 = first 64 SVDs. |
| */ |
| if (WARN_ON_ONCE(map_len > 8)) |
| map_len = 8; |
| |
| for (i = 0; i < map_len; i++) |
| map |= (u64)data[i] << (8 * i); |
| |
| out: |
| if (map) |
| info->color_formats |= DRM_COLOR_FORMAT_YCBCR420; |
| |
| *y420cmdb_map = map; |
| } |
| |
| static int add_cea_modes(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| const struct cea_db *db; |
| struct cea_db_iter iter; |
| int modes; |
| |
| /* CTA VDB block VICs parsed earlier */ |
| modes = add_cta_vdb_modes(connector); |
| |
| cea_db_iter_edid_begin(drm_edid, &iter); |
| cea_db_iter_for_each(db, &iter) { |
| if (cea_db_is_hdmi_vsdb(db)) { |
| modes += do_hdmi_vsdb_modes(connector, (const u8 *)db, |
| cea_db_payload_len(db)); |
| } else if (cea_db_is_y420vdb(db)) { |
| const u8 *vdb420 = cea_db_data(db) + 1; |
| |
| /* Add 4:2:0(only) modes present in EDID */ |
| modes += do_y420vdb_modes(connector, vdb420, |
| cea_db_payload_len(db) - 1); |
| } |
| } |
| cea_db_iter_end(&iter); |
| |
| return modes; |
| } |
| |
| static void fixup_detailed_cea_mode_clock(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| const struct drm_display_mode *cea_mode; |
| int clock1, clock2, clock; |
| u8 vic; |
| const char *type; |
| |
| /* |
| * allow 5kHz clock difference either way to account for |
| * the 10kHz clock resolution limit of detailed timings. |
| */ |
| vic = drm_match_cea_mode_clock_tolerance(mode, 5); |
| if (drm_valid_cea_vic(vic)) { |
| type = "CEA"; |
| cea_mode = cea_mode_for_vic(vic); |
| clock1 = cea_mode->clock; |
| clock2 = cea_mode_alternate_clock(cea_mode); |
| } else { |
| vic = drm_match_hdmi_mode_clock_tolerance(mode, 5); |
| if (drm_valid_hdmi_vic(vic)) { |
| type = "HDMI"; |
| cea_mode = &edid_4k_modes[vic]; |
| clock1 = cea_mode->clock; |
| clock2 = hdmi_mode_alternate_clock(cea_mode); |
| } else { |
| return; |
| } |
| } |
| |
| /* pick whichever is closest */ |
| if (abs(mode->clock - clock1) < abs(mode->clock - clock2)) |
| clock = clock1; |
| else |
| clock = clock2; |
| |
| if (mode->clock == clock) |
| return; |
| |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] detailed mode matches %s VIC %d, adjusting clock %d -> %d\n", |
| connector->base.id, connector->name, |
| type, vic, mode->clock, clock); |
| mode->clock = clock; |
| } |
| |
| static void drm_calculate_luminance_range(struct drm_connector *connector) |
| { |
| struct hdr_static_metadata *hdr_metadata = &connector->hdr_sink_metadata.hdmi_type1; |
| struct drm_luminance_range_info *luminance_range = |
| &connector->display_info.luminance_range; |
| static const u8 pre_computed_values[] = { |
| 50, 51, 52, 53, 55, 56, 57, 58, 59, 61, 62, 63, 65, 66, 68, 69, |
| 71, 72, 74, 75, 77, 79, 81, 82, 84, 86, 88, 90, 92, 94, 96, 98 |
| }; |
| u32 max_avg, min_cll, max, min, q, r; |
| |
| if (!(hdr_metadata->metadata_type & BIT(HDMI_STATIC_METADATA_TYPE1))) |
| return; |
| |
| max_avg = hdr_metadata->max_fall; |
| min_cll = hdr_metadata->min_cll; |
| |
| /* |
| * From the specification (CTA-861-G), for calculating the maximum |
| * luminance we need to use: |
| * Luminance = 50*2**(CV/32) |
| * Where CV is a one-byte value. |
| * For calculating this expression we may need float point precision; |
| * to avoid this complexity level, we take advantage that CV is divided |
| * by a constant. From the Euclids division algorithm, we know that CV |
| * can be written as: CV = 32*q + r. Next, we replace CV in the |
| * Luminance expression and get 50*(2**q)*(2**(r/32)), hence we just |
| * need to pre-compute the value of r/32. For pre-computing the values |
| * We just used the following Ruby line: |
| * (0...32).each {|cv| puts (50*2**(cv/32.0)).round} |
| * The results of the above expressions can be verified at |
| * pre_computed_values. |
| */ |
| q = max_avg >> 5; |
| r = max_avg % 32; |
| max = (1 << q) * pre_computed_values[r]; |
| |
| /* min luminance: maxLum * (CV/255)^2 / 100 */ |
| q = DIV_ROUND_CLOSEST(min_cll, 255); |
| min = max * DIV_ROUND_CLOSEST((q * q), 100); |
| |
| luminance_range->min_luminance = min; |
| luminance_range->max_luminance = max; |
| } |
| |
| static uint8_t eotf_supported(const u8 *edid_ext) |
| { |
| return edid_ext[2] & |
| (BIT(HDMI_EOTF_TRADITIONAL_GAMMA_SDR) | |
| BIT(HDMI_EOTF_TRADITIONAL_GAMMA_HDR) | |
| BIT(HDMI_EOTF_SMPTE_ST2084) | |
| BIT(HDMI_EOTF_BT_2100_HLG)); |
| } |
| |
| static uint8_t hdr_metadata_type(const u8 *edid_ext) |
| { |
| return edid_ext[3] & |
| BIT(HDMI_STATIC_METADATA_TYPE1); |
| } |
| |
| static void |
| drm_parse_hdr_metadata_block(struct drm_connector *connector, const u8 *db) |
| { |
| u16 len; |
| |
| len = cea_db_payload_len(db); |
| |
| connector->hdr_sink_metadata.hdmi_type1.eotf = |
| eotf_supported(db); |
| connector->hdr_sink_metadata.hdmi_type1.metadata_type = |
| hdr_metadata_type(db); |
| |
| if (len >= 4) |
| connector->hdr_sink_metadata.hdmi_type1.max_cll = db[4]; |
| if (len >= 5) |
| connector->hdr_sink_metadata.hdmi_type1.max_fall = db[5]; |
| if (len >= 6) { |
| connector->hdr_sink_metadata.hdmi_type1.min_cll = db[6]; |
| |
| /* Calculate only when all values are available */ |
| drm_calculate_luminance_range(connector); |
| } |
| } |
| |
| /* HDMI Vendor-Specific Data Block (HDMI VSDB, H14b-VSDB) */ |
| static void |
| drm_parse_hdmi_vsdb_audio(struct drm_connector *connector, const u8 *db) |
| { |
| u8 len = cea_db_payload_len(db); |
| |
| if (len >= 6 && (db[6] & (1 << 7))) |
| connector->eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= DRM_ELD_SUPPORTS_AI; |
| |
| if (len >= 10 && hdmi_vsdb_latency_present(db)) { |
| connector->latency_present[0] = true; |
| connector->video_latency[0] = db[9]; |
| connector->audio_latency[0] = db[10]; |
| } |
| |
| if (len >= 12 && hdmi_vsdb_i_latency_present(db)) { |
| connector->latency_present[1] = true; |
| connector->video_latency[1] = db[11]; |
| connector->audio_latency[1] = db[12]; |
| } |
| |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] HDMI: latency present %d %d, video latency %d %d, audio latency %d %d\n", |
| connector->base.id, connector->name, |
| connector->latency_present[0], connector->latency_present[1], |
| connector->video_latency[0], connector->video_latency[1], |
| connector->audio_latency[0], connector->audio_latency[1]); |
| } |
| |
| static void |
| monitor_name(const struct detailed_timing *timing, void *data) |
| { |
| const char **res = data; |
| |
| if (!is_display_descriptor(timing, EDID_DETAIL_MONITOR_NAME)) |
| return; |
| |
| *res = timing->data.other_data.data.str.str; |
| } |
| |
| static int get_monitor_name(const struct drm_edid *drm_edid, char name[13]) |
| { |
| const char *edid_name = NULL; |
| int mnl; |
| |
| if (!drm_edid || !name) |
| return 0; |
| |
| drm_for_each_detailed_block(drm_edid, monitor_name, &edid_name); |
| for (mnl = 0; edid_name && mnl < 13; mnl++) { |
| if (edid_name[mnl] == 0x0a) |
| break; |
| |
| name[mnl] = edid_name[mnl]; |
| } |
| |
| return mnl; |
| } |
| |
| /** |
| * drm_edid_get_monitor_name - fetch the monitor name from the edid |
| * @edid: monitor EDID information |
| * @name: pointer to a character array to hold the name of the monitor |
| * @bufsize: The size of the name buffer (should be at least 14 chars.) |
| * |
| */ |
| void drm_edid_get_monitor_name(const struct edid *edid, char *name, int bufsize) |
| { |
| int name_length = 0; |
| |
| if (bufsize <= 0) |
| return; |
| |
| if (edid) { |
| char buf[13]; |
| struct drm_edid drm_edid = { |
| .edid = edid, |
| .size = edid_size(edid), |
| }; |
| |
| name_length = min(get_monitor_name(&drm_edid, buf), bufsize - 1); |
| memcpy(name, buf, name_length); |
| } |
| |
| name[name_length] = '\0'; |
| } |
| EXPORT_SYMBOL(drm_edid_get_monitor_name); |
| |
| static void clear_eld(struct drm_connector *connector) |
| { |
| memset(connector->eld, 0, sizeof(connector->eld)); |
| |
| connector->latency_present[0] = false; |
| connector->latency_present[1] = false; |
| connector->video_latency[0] = 0; |
| connector->audio_latency[0] = 0; |
| connector->video_latency[1] = 0; |
| connector->audio_latency[1] = 0; |
| } |
| |
| /* |
| * drm_edid_to_eld - build ELD from EDID |
| * @connector: connector corresponding to the HDMI/DP sink |
| * @drm_edid: EDID to parse |
| * |
| * Fill the ELD (EDID-Like Data) buffer for passing to the audio driver. The |
| * HDCP and Port_ID ELD fields are left for the graphics driver to fill in. |
| */ |
| static void drm_edid_to_eld(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| const struct drm_display_info *info = &connector->display_info; |
| const struct cea_db *db; |
| struct cea_db_iter iter; |
| uint8_t *eld = connector->eld; |
| int total_sad_count = 0; |
| int mnl; |
| |
| if (!drm_edid) |
| return; |
| |
| mnl = get_monitor_name(drm_edid, &eld[DRM_ELD_MONITOR_NAME_STRING]); |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] ELD monitor %s\n", |
| connector->base.id, connector->name, |
| &eld[DRM_ELD_MONITOR_NAME_STRING]); |
| |
| eld[DRM_ELD_CEA_EDID_VER_MNL] = info->cea_rev << DRM_ELD_CEA_EDID_VER_SHIFT; |
| eld[DRM_ELD_CEA_EDID_VER_MNL] |= mnl; |
| |
| eld[DRM_ELD_VER] = DRM_ELD_VER_CEA861D; |
| |
| eld[DRM_ELD_MANUFACTURER_NAME0] = drm_edid->edid->mfg_id[0]; |
| eld[DRM_ELD_MANUFACTURER_NAME1] = drm_edid->edid->mfg_id[1]; |
| eld[DRM_ELD_PRODUCT_CODE0] = drm_edid->edid->prod_code[0]; |
| eld[DRM_ELD_PRODUCT_CODE1] = drm_edid->edid->prod_code[1]; |
| |
| cea_db_iter_edid_begin(drm_edid, &iter); |
| cea_db_iter_for_each(db, &iter) { |
| const u8 *data = cea_db_data(db); |
| int len = cea_db_payload_len(db); |
| int sad_count; |
| |
| switch (cea_db_tag(db)) { |
| case CTA_DB_AUDIO: |
| /* Audio Data Block, contains SADs */ |
| sad_count = min(len / 3, 15 - total_sad_count); |
| if (sad_count >= 1) |
| memcpy(&eld[DRM_ELD_CEA_SAD(mnl, total_sad_count)], |
| data, sad_count * 3); |
| total_sad_count += sad_count; |
| break; |
| case CTA_DB_SPEAKER: |
| /* Speaker Allocation Data Block */ |
| if (len >= 1) |
| eld[DRM_ELD_SPEAKER] = data[0]; |
| break; |
| case CTA_DB_VENDOR: |
| /* HDMI Vendor-Specific Data Block */ |
| if (cea_db_is_hdmi_vsdb(db)) |
| drm_parse_hdmi_vsdb_audio(connector, (const u8 *)db); |
| break; |
| default: |
| break; |
| } |
| } |
| cea_db_iter_end(&iter); |
| |
| eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= total_sad_count << DRM_ELD_SAD_COUNT_SHIFT; |
| |
| if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort || |
| connector->connector_type == DRM_MODE_CONNECTOR_eDP) |
| eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= DRM_ELD_CONN_TYPE_DP; |
| else |
| eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= DRM_ELD_CONN_TYPE_HDMI; |
| |
| eld[DRM_ELD_BASELINE_ELD_LEN] = |
| DIV_ROUND_UP(drm_eld_calc_baseline_block_size(eld), 4); |
| |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] ELD size %d, SAD count %d\n", |
| connector->base.id, connector->name, |
| drm_eld_size(eld), total_sad_count); |
| } |
| |
| static int _drm_edid_to_sad(const struct drm_edid *drm_edid, |
| struct cea_sad **sads) |
| { |
| const struct cea_db *db; |
| struct cea_db_iter iter; |
| int count = 0; |
| |
| cea_db_iter_edid_begin(drm_edid, &iter); |
| cea_db_iter_for_each(db, &iter) { |
| if (cea_db_tag(db) == CTA_DB_AUDIO) { |
| int j; |
| |
| count = cea_db_payload_len(db) / 3; /* SAD is 3B */ |
| *sads = kcalloc(count, sizeof(**sads), GFP_KERNEL); |
| if (!*sads) |
| return -ENOMEM; |
| for (j = 0; j < count; j++) { |
| const u8 *sad = &db->data[j * 3]; |
| |
| (*sads)[j].format = (sad[0] & 0x78) >> 3; |
| (*sads)[j].channels = sad[0] & 0x7; |
| (*sads)[j].freq = sad[1] & 0x7F; |
| (*sads)[j].byte2 = sad[2]; |
| } |
| break; |
| } |
| } |
| cea_db_iter_end(&iter); |
| |
| DRM_DEBUG_KMS("Found %d Short Audio Descriptors\n", count); |
| |
| return count; |
| } |
| |
| /** |
| * drm_edid_to_sad - extracts SADs from EDID |
| * @edid: EDID to parse |
| * @sads: pointer that will be set to the extracted SADs |
| * |
| * Looks for CEA EDID block and extracts SADs (Short Audio Descriptors) from it. |
| * |
| * Note: The returned pointer needs to be freed using kfree(). |
| * |
| * Return: The number of found SADs or negative number on error. |
| */ |
| int drm_edid_to_sad(const struct edid *edid, struct cea_sad **sads) |
| { |
| struct drm_edid drm_edid; |
| |
| return _drm_edid_to_sad(drm_edid_legacy_init(&drm_edid, edid), sads); |
| } |
| EXPORT_SYMBOL(drm_edid_to_sad); |
| |
| static int _drm_edid_to_speaker_allocation(const struct drm_edid *drm_edid, |
| u8 **sadb) |
| { |
| const struct cea_db *db; |
| struct cea_db_iter iter; |
| int count = 0; |
| |
| cea_db_iter_edid_begin(drm_edid, &iter); |
| cea_db_iter_for_each(db, &iter) { |
| if (cea_db_tag(db) == CTA_DB_SPEAKER && |
| cea_db_payload_len(db) == 3) { |
| *sadb = kmemdup(db->data, cea_db_payload_len(db), |
| GFP_KERNEL); |
| if (!*sadb) |
| return -ENOMEM; |
| count = cea_db_payload_len(db); |
| break; |
| } |
| } |
| cea_db_iter_end(&iter); |
| |
| DRM_DEBUG_KMS("Found %d Speaker Allocation Data Blocks\n", count); |
| |
| return count; |
| } |
| |
| /** |
| * drm_edid_to_speaker_allocation - extracts Speaker Allocation Data Blocks from EDID |
| * @edid: EDID to parse |
| * @sadb: pointer to the speaker block |
| * |
| * Looks for CEA EDID block and extracts the Speaker Allocation Data Block from it. |
| * |
| * Note: The returned pointer needs to be freed using kfree(). |
| * |
| * Return: The number of found Speaker Allocation Blocks or negative number on |
| * error. |
| */ |
| int drm_edid_to_speaker_allocation(const struct edid *edid, u8 **sadb) |
| { |
| struct drm_edid drm_edid; |
| |
| return _drm_edid_to_speaker_allocation(drm_edid_legacy_init(&drm_edid, edid), |
| sadb); |
| } |
| EXPORT_SYMBOL(drm_edid_to_speaker_allocation); |
| |
| /** |
| * drm_av_sync_delay - compute the HDMI/DP sink audio-video sync delay |
| * @connector: connector associated with the HDMI/DP sink |
| * @mode: the display mode |
| * |
| * Return: The HDMI/DP sink's audio-video sync delay in milliseconds or 0 if |
| * the sink doesn't support audio or video. |
| */ |
| int drm_av_sync_delay(struct drm_connector *connector, |
| const struct drm_display_mode *mode) |
| { |
| int i = !!(mode->flags & DRM_MODE_FLAG_INTERLACE); |
| int a, v; |
| |
| if (!connector->latency_present[0]) |
| return 0; |
| if (!connector->latency_present[1]) |
| i = 0; |
| |
| a = connector->audio_latency[i]; |
| v = connector->video_latency[i]; |
| |
| /* |
| * HDMI/DP sink doesn't support audio or video? |
| */ |
| if (a == 255 || v == 255) |
| return 0; |
| |
| /* |
| * Convert raw EDID values to millisecond. |
| * Treat unknown latency as 0ms. |
| */ |
| if (a) |
| a = min(2 * (a - 1), 500); |
| if (v) |
| v = min(2 * (v - 1), 500); |
| |
| return max(v - a, 0); |
| } |
| EXPORT_SYMBOL(drm_av_sync_delay); |
| |
| static bool _drm_detect_hdmi_monitor(const struct drm_edid *drm_edid) |
| { |
| const struct cea_db *db; |
| struct cea_db_iter iter; |
| bool hdmi = false; |
| |
| /* |
| * Because HDMI identifier is in Vendor Specific Block, |
| * search it from all data blocks of CEA extension. |
| */ |
| cea_db_iter_edid_begin(drm_edid, &iter); |
| cea_db_iter_for_each(db, &iter) { |
| if (cea_db_is_hdmi_vsdb(db)) { |
| hdmi = true; |
| break; |
| } |
| } |
| cea_db_iter_end(&iter); |
| |
| return hdmi; |
| } |
| |
| /** |
| * drm_detect_hdmi_monitor - detect whether monitor is HDMI |
| * @edid: monitor EDID information |
| * |
| * Parse the CEA extension according to CEA-861-B. |
| * |
| * Drivers that have added the modes parsed from EDID to drm_display_info |
| * should use &drm_display_info.is_hdmi instead of calling this function. |
| * |
| * Return: True if the monitor is HDMI, false if not or unknown. |
| */ |
| bool drm_detect_hdmi_monitor(const struct edid *edid) |
| { |
| struct drm_edid drm_edid; |
| |
| return _drm_detect_hdmi_monitor(drm_edid_legacy_init(&drm_edid, edid)); |
| } |
| EXPORT_SYMBOL(drm_detect_hdmi_monitor); |
| |
| static bool _drm_detect_monitor_audio(const struct drm_edid *drm_edid) |
| { |
| struct drm_edid_iter edid_iter; |
| const struct cea_db *db; |
| struct cea_db_iter iter; |
| const u8 *edid_ext; |
| bool has_audio = false; |
| |
| drm_edid_iter_begin(drm_edid, &edid_iter); |
| drm_edid_iter_for_each(edid_ext, &edid_iter) { |
| if (edid_ext[0] == CEA_EXT) { |
| has_audio = edid_ext[3] & EDID_BASIC_AUDIO; |
| if (has_audio) |
| break; |
| } |
| } |
| drm_edid_iter_end(&edid_iter); |
| |
| if (has_audio) { |
| DRM_DEBUG_KMS("Monitor has basic audio support\n"); |
| goto end; |
| } |
| |
| cea_db_iter_edid_begin(drm_edid, &iter); |
| cea_db_iter_for_each(db, &iter) { |
| if (cea_db_tag(db) == CTA_DB_AUDIO) { |
| const u8 *data = cea_db_data(db); |
| int i; |
| |
| for (i = 0; i < cea_db_payload_len(db); i += 3) |
| DRM_DEBUG_KMS("CEA audio format %d\n", |
| (data[i] >> 3) & 0xf); |
| has_audio = true; |
| break; |
| } |
| } |
| cea_db_iter_end(&iter); |
| |
| end: |
| return has_audio; |
| } |
| |
| /** |
| * drm_detect_monitor_audio - check monitor audio capability |
| * @edid: EDID block to scan |
| * |
| * Monitor should have CEA extension block. |
| * If monitor has 'basic audio', but no CEA audio blocks, it's 'basic |
| * audio' only. If there is any audio extension block and supported |
| * audio format, assume at least 'basic audio' support, even if 'basic |
| * audio' is not defined in EDID. |
| * |
| * Return: True if the monitor supports audio, false otherwise. |
| */ |
| bool drm_detect_monitor_audio(const struct edid *edid) |
| { |
| struct drm_edid drm_edid; |
| |
| return _drm_detect_monitor_audio(drm_edid_legacy_init(&drm_edid, edid)); |
| } |
| EXPORT_SYMBOL(drm_detect_monitor_audio); |
| |
| |
| /** |
| * drm_default_rgb_quant_range - default RGB quantization range |
| * @mode: display mode |
| * |
| * Determine the default RGB quantization range for the mode, |
| * as specified in CEA-861. |
| * |
| * Return: The default RGB quantization range for the mode |
| */ |
| enum hdmi_quantization_range |
| drm_default_rgb_quant_range(const struct drm_display_mode *mode) |
| { |
| /* All CEA modes other than VIC 1 use limited quantization range. */ |
| return drm_match_cea_mode(mode) > 1 ? |
| HDMI_QUANTIZATION_RANGE_LIMITED : |
| HDMI_QUANTIZATION_RANGE_FULL; |
| } |
| EXPORT_SYMBOL(drm_default_rgb_quant_range); |
| |
| /* CTA-861 Video Data Block (CTA VDB) */ |
| static void parse_cta_vdb(struct drm_connector *connector, const struct cea_db *db) |
| { |
| struct drm_display_info *info = &connector->display_info; |
| int i, vic_index, len = cea_db_payload_len(db); |
| const u8 *svds = cea_db_data(db); |
| u8 *vics; |
| |
| if (!len) |
| return; |
| |
| /* Gracefully handle multiple VDBs, however unlikely that is */ |
| vics = krealloc(info->vics, info->vics_len + len, GFP_KERNEL); |
| if (!vics) |
| return; |
| |
| vic_index = info->vics_len; |
| info->vics_len += len; |
| info->vics = vics; |
| |
| for (i = 0; i < len; i++) { |
| u8 vic = svd_to_vic(svds[i]); |
| |
| if (!drm_valid_cea_vic(vic)) |
| vic = 0; |
| |
| info->vics[vic_index++] = vic; |
| } |
| } |
| |
| /* |
| * Update y420_cmdb_modes based on previously parsed CTA VDB and Y420CMDB. |
| * |
| * Translate the y420cmdb_map based on VIC indexes to y420_cmdb_modes indexed |
| * using the VICs themselves. |
| */ |
| static void update_cta_y420cmdb(struct drm_connector *connector, u64 y420cmdb_map) |
| { |
| struct drm_display_info *info = &connector->display_info; |
| struct drm_hdmi_info *hdmi = &info->hdmi; |
| int i, len = min_t(int, info->vics_len, BITS_PER_TYPE(y420cmdb_map)); |
| |
| for (i = 0; i < len; i++) { |
| u8 vic = info->vics[i]; |
| |
| if (vic && y420cmdb_map & BIT_ULL(i)) |
| bitmap_set(hdmi->y420_cmdb_modes, vic, 1); |
| } |
| } |
| |
| static bool cta_vdb_has_vic(const struct drm_connector *connector, u8 vic) |
| { |
| const struct drm_display_info *info = &connector->display_info; |
| int i; |
| |
| if (!vic || !info->vics) |
| return false; |
| |
| for (i = 0; i < info->vics_len; i++) { |
| if (info->vics[i] == vic) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /* CTA-861-H YCbCr 4:2:0 Video Data Block (CTA Y420VDB) */ |
| static void parse_cta_y420vdb(struct drm_connector *connector, |
| const struct cea_db *db) |
| { |
| struct drm_display_info *info = &connector->display_info; |
| struct drm_hdmi_info *hdmi = &info->hdmi; |
| const u8 *svds = cea_db_data(db) + 1; |
| int i; |
| |
| for (i = 0; i < cea_db_payload_len(db) - 1; i++) { |
| u8 vic = svd_to_vic(svds[i]); |
| |
| if (!drm_valid_cea_vic(vic)) |
| continue; |
| |
| bitmap_set(hdmi->y420_vdb_modes, vic, 1); |
| info->color_formats |= DRM_COLOR_FORMAT_YCBCR420; |
| } |
| } |
| |
| static void drm_parse_vcdb(struct drm_connector *connector, const u8 *db) |
| { |
| struct drm_display_info *info = &connector->display_info; |
| |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] CEA VCDB 0x%02x\n", |
| connector->base.id, connector->name, db[2]); |
| |
| if (db[2] & EDID_CEA_VCDB_QS) |
| info->rgb_quant_range_selectable = true; |
| } |
| |
| static |
| void drm_get_max_frl_rate(int max_frl_rate, u8 *max_lanes, u8 *max_rate_per_lane) |
| { |
| switch (max_frl_rate) { |
| case 1: |
| *max_lanes = 3; |
| *max_rate_per_lane = 3; |
| break; |
| case 2: |
| *max_lanes = 3; |
| *max_rate_per_lane = 6; |
| break; |
| case 3: |
| *max_lanes = 4; |
| *max_rate_per_lane = 6; |
| break; |
| case 4: |
| *max_lanes = 4; |
| *max_rate_per_lane = 8; |
| break; |
| case 5: |
| *max_lanes = 4; |
| *max_rate_per_lane = 10; |
| break; |
| case 6: |
| *max_lanes = 4; |
| *max_rate_per_lane = 12; |
| break; |
| case 0: |
| default: |
| *max_lanes = 0; |
| *max_rate_per_lane = 0; |
| } |
| } |
| |
| static void drm_parse_ycbcr420_deep_color_info(struct drm_connector *connector, |
| const u8 *db) |
| { |
| u8 dc_mask; |
| struct drm_hdmi_info *hdmi = &connector->display_info.hdmi; |
| |
| dc_mask = db[7] & DRM_EDID_YCBCR420_DC_MASK; |
| hdmi->y420_dc_modes = dc_mask; |
| } |
| |
| static void drm_parse_dsc_info(struct drm_hdmi_dsc_cap *hdmi_dsc, |
| const u8 *hf_scds) |
| { |
| hdmi_dsc->v_1p2 = hf_scds[11] & DRM_EDID_DSC_1P2; |
| |
| if (!hdmi_dsc->v_1p2) |
| return; |
| |
| hdmi_dsc->native_420 = hf_scds[11] & DRM_EDID_DSC_NATIVE_420; |
| hdmi_dsc->all_bpp = hf_scds[11] & DRM_EDID_DSC_ALL_BPP; |
| |
| if (hf_scds[11] & DRM_EDID_DSC_16BPC) |
| hdmi_dsc->bpc_supported = 16; |
| else if (hf_scds[11] & DRM_EDID_DSC_12BPC) |
| hdmi_dsc->bpc_supported = 12; |
| else if (hf_scds[11] & DRM_EDID_DSC_10BPC) |
| hdmi_dsc->bpc_supported = 10; |
| else |
| /* Supports min 8 BPC if DSC 1.2 is supported*/ |
| hdmi_dsc->bpc_supported = 8; |
| |
| if (cea_db_payload_len(hf_scds) >= 12 && hf_scds[12]) { |
| u8 dsc_max_slices; |
| u8 dsc_max_frl_rate; |
| |
| dsc_max_frl_rate = (hf_scds[12] & DRM_EDID_DSC_MAX_FRL_RATE_MASK) >> 4; |
| drm_get_max_frl_rate(dsc_max_frl_rate, &hdmi_dsc->max_lanes, |
| &hdmi_dsc->max_frl_rate_per_lane); |
| |
| dsc_max_slices = hf_scds[12] & DRM_EDID_DSC_MAX_SLICES; |
| |
| switch (dsc_max_slices) { |
| case 1: |
| hdmi_dsc->max_slices = 1; |
| hdmi_dsc->clk_per_slice = 340; |
| break; |
| case 2: |
| hdmi_dsc->max_slices = 2; |
| hdmi_dsc->clk_per_slice = 340; |
| break; |
| case 3: |
| hdmi_dsc->max_slices = 4; |
| hdmi_dsc->clk_per_slice = 340; |
| break; |
| case 4: |
| hdmi_dsc->max_slices = 8; |
| hdmi_dsc->clk_per_slice = 340; |
| break; |
| case 5: |
| hdmi_dsc->max_slices = 8; |
| hdmi_dsc->clk_per_slice = 400; |
| break; |
| case 6: |
| hdmi_dsc->max_slices = 12; |
| hdmi_dsc->clk_per_slice = 400; |
| break; |
| case 7: |
| hdmi_dsc->max_slices = 16; |
| hdmi_dsc->clk_per_slice = 400; |
| break; |
| case 0: |
| default: |
| hdmi_dsc->max_slices = 0; |
| hdmi_dsc->clk_per_slice = 0; |
| } |
| } |
| |
| if (cea_db_payload_len(hf_scds) >= 13 && hf_scds[13]) |
| hdmi_dsc->total_chunk_kbytes = hf_scds[13] & DRM_EDID_DSC_TOTAL_CHUNK_KBYTES; |
| } |
| |
| /* Sink Capability Data Structure */ |
| static void drm_parse_hdmi_forum_scds(struct drm_connector *connector, |
| const u8 *hf_scds) |
| { |
| struct drm_display_info *info = &connector->display_info; |
| struct drm_hdmi_info *hdmi = &info->hdmi; |
| struct drm_hdmi_dsc_cap *hdmi_dsc = &hdmi->dsc_cap; |
| int max_tmds_clock = 0; |
| u8 max_frl_rate = 0; |
| bool dsc_support = false; |
| |
| info->has_hdmi_infoframe = true; |
| |
| if (hf_scds[6] & 0x80) { |
| hdmi->scdc.supported = true; |
| if (hf_scds[6] & 0x40) |
| hdmi->scdc.read_request = true; |
| } |
| |
| /* |
| * All HDMI 2.0 monitors must support scrambling at rates > 340 MHz. |
| * And as per the spec, three factors confirm this: |
| * * Availability of a HF-VSDB block in EDID (check) |
| * * Non zero Max_TMDS_Char_Rate filed in HF-VSDB (let's check) |
| * * SCDC support available (let's check) |
| * Lets check it out. |
| */ |
| |
| if (hf_scds[5]) { |
| struct drm_scdc *scdc = &hdmi->scdc; |
| |
| /* max clock is 5000 KHz times block value */ |
| max_tmds_clock = hf_scds[5] * 5000; |
| |
| if (max_tmds_clock > 340000) { |
| info->max_tmds_clock = max_tmds_clock; |
| } |
| |
| if (scdc->supported) { |
| scdc->scrambling.supported = true; |
| |
| /* Few sinks support scrambling for clocks < 340M */ |
| if ((hf_scds[6] & 0x8)) |
| scdc->scrambling.low_rates = true; |
| } |
| } |
| |
| if (hf_scds[7]) { |
| max_frl_rate = (hf_scds[7] & DRM_EDID_MAX_FRL_RATE_MASK) >> 4; |
| drm_get_max_frl_rate(max_frl_rate, &hdmi->max_lanes, |
| &hdmi->max_frl_rate_per_lane); |
| } |
| |
| drm_parse_ycbcr420_deep_color_info(connector, hf_scds); |
| |
| if (cea_db_payload_len(hf_scds) >= 11 && hf_scds[11]) { |
| drm_parse_dsc_info(hdmi_dsc, hf_scds); |
| dsc_support = true; |
| } |
| |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] HF-VSDB: max TMDS clock: %d KHz, HDMI 2.1 support: %s, DSC 1.2 support: %s\n", |
| connector->base.id, connector->name, |
| max_tmds_clock, str_yes_no(max_frl_rate), str_yes_no(dsc_support)); |
| } |
| |
| static void drm_parse_hdmi_deep_color_info(struct drm_connector *connector, |
| const u8 *hdmi) |
| { |
| struct drm_display_info *info = &connector->display_info; |
| unsigned int dc_bpc = 0; |
| |
| /* HDMI supports at least 8 bpc */ |
| info->bpc = 8; |
| |
| if (cea_db_payload_len(hdmi) < 6) |
| return; |
| |
| if (hdmi[6] & DRM_EDID_HDMI_DC_30) { |
| dc_bpc = 10; |
| info->edid_hdmi_rgb444_dc_modes |= DRM_EDID_HDMI_DC_30; |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] HDMI sink does deep color 30.\n", |
| connector->base.id, connector->name); |
| } |
| |
| if (hdmi[6] & DRM_EDID_HDMI_DC_36) { |
| dc_bpc = 12; |
| info->edid_hdmi_rgb444_dc_modes |= DRM_EDID_HDMI_DC_36; |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] HDMI sink does deep color 36.\n", |
| connector->base.id, connector->name); |
| } |
| |
| if (hdmi[6] & DRM_EDID_HDMI_DC_48) { |
| dc_bpc = 16; |
| info->edid_hdmi_rgb444_dc_modes |= DRM_EDID_HDMI_DC_48; |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] HDMI sink does deep color 48.\n", |
| connector->base.id, connector->name); |
| } |
| |
| if (dc_bpc == 0) { |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] No deep color support on this HDMI sink.\n", |
| connector->base.id, connector->name); |
| return; |
| } |
| |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] Assigning HDMI sink color depth as %d bpc.\n", |
| connector->base.id, connector->name, dc_bpc); |
| info->bpc = dc_bpc; |
| |
| /* YCRCB444 is optional according to spec. */ |
| if (hdmi[6] & DRM_EDID_HDMI_DC_Y444) { |
| info->edid_hdmi_ycbcr444_dc_modes = info->edid_hdmi_rgb444_dc_modes; |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] HDMI sink does YCRCB444 in deep color.\n", |
| connector->base.id, connector->name); |
| } |
| |
| /* |
| * Spec says that if any deep color mode is supported at all, |
| * then deep color 36 bit must be supported. |
| */ |
| if (!(hdmi[6] & DRM_EDID_HDMI_DC_36)) { |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] HDMI sink should do DC_36, but does not!\n", |
| connector->base.id, connector->name); |
| } |
| } |
| |
| /* HDMI Vendor-Specific Data Block (HDMI VSDB, H14b-VSDB) */ |
| static void |
| drm_parse_hdmi_vsdb_video(struct drm_connector *connector, const u8 *db) |
| { |
| struct drm_display_info *info = &connector->display_info; |
| u8 len = cea_db_payload_len(db); |
| |
| info->is_hdmi = true; |
| |
| if (len >= 6) |
| info->dvi_dual = db[6] & 1; |
| if (len >= 7) |
| info->max_tmds_clock = db[7] * 5000; |
| |
| /* |
| * Try to infer whether the sink supports HDMI infoframes. |
| * |
| * HDMI infoframe support was first added in HDMI 1.4. Assume the sink |
| * supports infoframes if HDMI_Video_present is set. |
| */ |
| if (len >= 8 && db[8] & BIT(5)) |
| info->has_hdmi_infoframe = true; |
| |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] HDMI: DVI dual %d, max TMDS clock %d kHz\n", |
| connector->base.id, connector->name, |
| info->dvi_dual, info->max_tmds_clock); |
| |
| drm_parse_hdmi_deep_color_info(connector, db); |
| } |
| |
| /* |
| * See EDID extension for head-mounted and specialized monitors, specified at: |
| * https://docs.microsoft.com/en-us/windows-hardware/drivers/display/specialized-monitors-edid-extension |
| */ |
| static void drm_parse_microsoft_vsdb(struct drm_connector *connector, |
| const u8 *db) |
| { |
| struct drm_display_info *info = &connector->display_info; |
| u8 version = db[4]; |
| bool desktop_usage = db[5] & BIT(6); |
| |
| /* Version 1 and 2 for HMDs, version 3 flags desktop usage explicitly */ |
| if (version == 1 || version == 2 || (version == 3 && !desktop_usage)) |
| info->non_desktop = true; |
| |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] HMD or specialized display VSDB version %u: 0x%02x\n", |
| connector->base.id, connector->name, version, db[5]); |
| } |
| |
| static void drm_parse_cea_ext(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| struct drm_display_info *info = &connector->display_info; |
| struct drm_edid_iter edid_iter; |
| const struct cea_db *db; |
| struct cea_db_iter iter; |
| const u8 *edid_ext; |
| u64 y420cmdb_map = 0; |
| |
| drm_edid_iter_begin(drm_edid, &edid_iter); |
| drm_edid_iter_for_each(edid_ext, &edid_iter) { |
| if (edid_ext[0] != CEA_EXT) |
| continue; |
| |
| if (!info->cea_rev) |
| info->cea_rev = edid_ext[1]; |
| |
| if (info->cea_rev != edid_ext[1]) |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] CEA extension version mismatch %u != %u\n", |
| connector->base.id, connector->name, |
| info->cea_rev, edid_ext[1]); |
| |
| /* The existence of a CTA extension should imply RGB support */ |
| info->color_formats = DRM_COLOR_FORMAT_RGB444; |
| if (edid_ext[3] & EDID_CEA_YCRCB444) |
| info->color_formats |= DRM_COLOR_FORMAT_YCBCR444; |
| if (edid_ext[3] & EDID_CEA_YCRCB422) |
| info->color_formats |= DRM_COLOR_FORMAT_YCBCR422; |
| } |
| drm_edid_iter_end(&edid_iter); |
| |
| cea_db_iter_edid_begin(drm_edid, &iter); |
| cea_db_iter_for_each(db, &iter) { |
| /* FIXME: convert parsers to use struct cea_db */ |
| const u8 *data = (const u8 *)db; |
| |
| if (cea_db_is_hdmi_vsdb(db)) |
| drm_parse_hdmi_vsdb_video(connector, data); |
| else if (cea_db_is_hdmi_forum_vsdb(db) || |
| cea_db_is_hdmi_forum_scdb(db)) |
| drm_parse_hdmi_forum_scds(connector, data); |
| else if (cea_db_is_microsoft_vsdb(db)) |
| drm_parse_microsoft_vsdb(connector, data); |
| else if (cea_db_is_y420cmdb(db)) |
| parse_cta_y420cmdb(connector, db, &y420cmdb_map); |
| else if (cea_db_is_y420vdb(db)) |
| parse_cta_y420vdb(connector, db); |
| else if (cea_db_is_vcdb(db)) |
| drm_parse_vcdb(connector, data); |
| else if (cea_db_is_hdmi_hdr_metadata_block(db)) |
| drm_parse_hdr_metadata_block(connector, data); |
| else if (cea_db_tag(db) == CTA_DB_VIDEO) |
| parse_cta_vdb(connector, db); |
| } |
| cea_db_iter_end(&iter); |
| |
| if (y420cmdb_map) |
| update_cta_y420cmdb(connector, y420cmdb_map); |
| } |
| |
| static |
| void get_monitor_range(const struct detailed_timing *timing, void *c) |
| { |
| struct detailed_mode_closure *closure = c; |
| struct drm_display_info *info = &closure->connector->display_info; |
| struct drm_monitor_range_info *monitor_range = &info->monitor_range; |
| const struct detailed_non_pixel *data = &timing->data.other_data; |
| const struct detailed_data_monitor_range *range = &data->data.range; |
| const struct edid *edid = closure->drm_edid->edid; |
| |
| if (!is_display_descriptor(timing, EDID_DETAIL_MONITOR_RANGE)) |
| return; |
| |
| /* |
| * These limits are used to determine the VRR refresh |
| * rate range. Only the "range limits only" variant |
| * of the range descriptor seems to guarantee that |
| * any and all timings are accepted by the sink, as |
| * opposed to just timings conforming to the indicated |
| * formula (GTF/GTF2/CVT). Thus other variants of the |
| * range descriptor are not accepted here. |
| */ |
| if (range->flags != DRM_EDID_RANGE_LIMITS_ONLY_FLAG) |
| return; |
| |
| monitor_range->min_vfreq = range->min_vfreq; |
| monitor_range->max_vfreq = range->max_vfreq; |
| |
| if (edid->revision >= 4) { |
| if (data->pad2 & DRM_EDID_RANGE_OFFSET_MIN_VFREQ) |
| monitor_range->min_vfreq += 255; |
| if (data->pad2 & DRM_EDID_RANGE_OFFSET_MAX_VFREQ) |
| monitor_range->max_vfreq += 255; |
| } |
| } |
| |
| static void drm_get_monitor_range(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| const struct drm_display_info *info = &connector->display_info; |
| struct detailed_mode_closure closure = { |
| .connector = connector, |
| .drm_edid = drm_edid, |
| }; |
| |
| if (drm_edid->edid->revision < 4) |
| return; |
| |
| if (!(drm_edid->edid->features & DRM_EDID_FEATURE_CONTINUOUS_FREQ)) |
| return; |
| |
| drm_for_each_detailed_block(drm_edid, get_monitor_range, &closure); |
| |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] Supported Monitor Refresh rate range is %d Hz - %d Hz\n", |
| connector->base.id, connector->name, |
| info->monitor_range.min_vfreq, info->monitor_range.max_vfreq); |
| } |
| |
| static void drm_parse_vesa_mso_data(struct drm_connector *connector, |
| const struct displayid_block *block) |
| { |
| struct displayid_vesa_vendor_specific_block *vesa = |
| (struct displayid_vesa_vendor_specific_block *)block; |
| struct drm_display_info *info = &connector->display_info; |
| |
| if (block->num_bytes < 3) { |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] Unexpected vendor block size %u\n", |
| connector->base.id, connector->name, block->num_bytes); |
| return; |
| } |
| |
| if (oui(vesa->oui[0], vesa->oui[1], vesa->oui[2]) != VESA_IEEE_OUI) |
| return; |
| |
| if (sizeof(*vesa) != sizeof(*block) + block->num_bytes) { |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] Unexpected VESA vendor block size\n", |
| connector->base.id, connector->name); |
| return; |
| } |
| |
| switch (FIELD_GET(DISPLAYID_VESA_MSO_MODE, vesa->mso)) { |
| default: |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] Reserved MSO mode value\n", |
| connector->base.id, connector->name); |
| fallthrough; |
| case 0: |
| info->mso_stream_count = 0; |
| break; |
| case 1: |
| info->mso_stream_count = 2; /* 2 or 4 links */ |
| break; |
| case 2: |
| info->mso_stream_count = 4; /* 4 links */ |
| break; |
| } |
| |
| if (!info->mso_stream_count) { |
| info->mso_pixel_overlap = 0; |
| return; |
| } |
| |
| info->mso_pixel_overlap = FIELD_GET(DISPLAYID_VESA_MSO_OVERLAP, vesa->mso); |
| if (info->mso_pixel_overlap > 8) { |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] Reserved MSO pixel overlap value %u\n", |
| connector->base.id, connector->name, |
| info->mso_pixel_overlap); |
| info->mso_pixel_overlap = 8; |
| } |
| |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] MSO stream count %u, pixel overlap %u\n", |
| connector->base.id, connector->name, |
| info->mso_stream_count, info->mso_pixel_overlap); |
| } |
| |
| static void drm_update_mso(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| const struct displayid_block *block; |
| struct displayid_iter iter; |
| |
| displayid_iter_edid_begin(drm_edid, &iter); |
| displayid_iter_for_each(block, &iter) { |
| if (block->tag == DATA_BLOCK_2_VENDOR_SPECIFIC) |
| drm_parse_vesa_mso_data(connector, block); |
| } |
| displayid_iter_end(&iter); |
| } |
| |
| /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset |
| * all of the values which would have been set from EDID |
| */ |
| static void drm_reset_display_info(struct drm_connector *connector) |
| { |
| struct drm_display_info *info = &connector->display_info; |
| |
| info->width_mm = 0; |
| info->height_mm = 0; |
| |
| info->bpc = 0; |
| info->color_formats = 0; |
| info->cea_rev = 0; |
| info->max_tmds_clock = 0; |
| info->dvi_dual = false; |
| info->is_hdmi = false; |
| info->has_hdmi_infoframe = false; |
| info->rgb_quant_range_selectable = false; |
| memset(&info->hdmi, 0, sizeof(info->hdmi)); |
| |
| info->edid_hdmi_rgb444_dc_modes = 0; |
| info->edid_hdmi_ycbcr444_dc_modes = 0; |
| |
| info->non_desktop = 0; |
| memset(&info->monitor_range, 0, sizeof(info->monitor_range)); |
| memset(&info->luminance_range, 0, sizeof(info->luminance_range)); |
| |
| info->mso_stream_count = 0; |
| info->mso_pixel_overlap = 0; |
| info->max_dsc_bpp = 0; |
| |
| kfree(info->vics); |
| info->vics = NULL; |
| info->vics_len = 0; |
| |
| info->quirks = 0; |
| } |
| |
| static void update_displayid_info(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| struct drm_display_info *info = &connector->display_info; |
| const struct displayid_block *block; |
| struct displayid_iter iter; |
| |
| displayid_iter_edid_begin(drm_edid, &iter); |
| displayid_iter_for_each(block, &iter) { |
| if (displayid_version(&iter) == DISPLAY_ID_STRUCTURE_VER_20 && |
| (displayid_primary_use(&iter) == PRIMARY_USE_HEAD_MOUNTED_VR || |
| displayid_primary_use(&iter) == PRIMARY_USE_HEAD_MOUNTED_AR)) |
| info->non_desktop = true; |
| |
| /* |
| * We're only interested in the base section here, no need to |
| * iterate further. |
| */ |
| break; |
| } |
| displayid_iter_end(&iter); |
| } |
| |
| static void update_display_info(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| struct drm_display_info *info = &connector->display_info; |
| const struct edid *edid; |
| |
| drm_reset_display_info(connector); |
| clear_eld(connector); |
| |
| if (!drm_edid) |
| return; |
| |
| edid = drm_edid->edid; |
| |
| info->quirks = edid_get_quirks(drm_edid); |
| |
| info->width_mm = edid->width_cm * 10; |
| info->height_mm = edid->height_cm * 10; |
| |
| drm_get_monitor_range(connector, drm_edid); |
| |
| if (edid->revision < 3) |
| goto out; |
| |
| if (!(edid->input & DRM_EDID_INPUT_DIGITAL)) |
| goto out; |
| |
| info->color_formats |= DRM_COLOR_FORMAT_RGB444; |
| drm_parse_cea_ext(connector, drm_edid); |
| |
| update_displayid_info(connector, drm_edid); |
| |
| /* |
| * Digital sink with "DFP 1.x compliant TMDS" according to EDID 1.3? |
| * |
| * For such displays, the DFP spec 1.0, section 3.10 "EDID support" |
| * tells us to assume 8 bpc color depth if the EDID doesn't have |
| * extensions which tell otherwise. |
| */ |
| if (info->bpc == 0 && edid->revision == 3 && |
| edid->input & DRM_EDID_DIGITAL_DFP_1_X) { |
| info->bpc = 8; |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] Assigning DFP sink color depth as %d bpc.\n", |
| connector->base.id, connector->name, info->bpc); |
| } |
| |
| /* Only defined for 1.4 with digital displays */ |
| if (edid->revision < 4) |
| goto out; |
| |
| switch (edid->input & DRM_EDID_DIGITAL_DEPTH_MASK) { |
| case DRM_EDID_DIGITAL_DEPTH_6: |
| info->bpc = 6; |
| break; |
| case DRM_EDID_DIGITAL_DEPTH_8: |
| info->bpc = 8; |
| break; |
| case DRM_EDID_DIGITAL_DEPTH_10: |
| info->bpc = 10; |
| break; |
| case DRM_EDID_DIGITAL_DEPTH_12: |
| info->bpc = 12; |
| break; |
| case DRM_EDID_DIGITAL_DEPTH_14: |
| info->bpc = 14; |
| break; |
| case DRM_EDID_DIGITAL_DEPTH_16: |
| info->bpc = 16; |
| break; |
| case DRM_EDID_DIGITAL_DEPTH_UNDEF: |
| default: |
| info->bpc = 0; |
| break; |
| } |
| |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] Assigning EDID-1.4 digital sink color depth as %d bpc.\n", |
| connector->base.id, connector->name, info->bpc); |
| |
| if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB444) |
| info->color_formats |= DRM_COLOR_FORMAT_YCBCR444; |
| if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB422) |
| info->color_formats |= DRM_COLOR_FORMAT_YCBCR422; |
| |
| drm_update_mso(connector, drm_edid); |
| |
| out: |
| if (info->quirks & EDID_QUIRK_NON_DESKTOP) { |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] Non-desktop display%s\n", |
| connector->base.id, connector->name, |
| info->non_desktop ? " (redundant quirk)" : ""); |
| info->non_desktop = true; |
| } |
| |
| if (info->quirks & EDID_QUIRK_CAP_DSC_15BPP) |
| info->max_dsc_bpp = 15; |
| |
| if (info->quirks & EDID_QUIRK_FORCE_6BPC) |
| info->bpc = 6; |
| |
| if (info->quirks & EDID_QUIRK_FORCE_8BPC) |
| info->bpc = 8; |
| |
| if (info->quirks & EDID_QUIRK_FORCE_10BPC) |
| info->bpc = 10; |
| |
| if (info->quirks & EDID_QUIRK_FORCE_12BPC) |
| info->bpc = 12; |
| |
| /* Depends on info->cea_rev set by drm_parse_cea_ext() above */ |
| drm_edid_to_eld(connector, drm_edid); |
| } |
| |
| static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *dev, |
| struct displayid_detailed_timings_1 *timings, |
| bool type_7) |
| { |
| struct drm_display_mode *mode; |
| unsigned pixel_clock = (timings->pixel_clock[0] | |
| (timings->pixel_clock[1] << 8) | |
| (timings->pixel_clock[2] << 16)) + 1; |
| unsigned hactive = (timings->hactive[0] | timings->hactive[1] << 8) + 1; |
| unsigned hblank = (timings->hblank[0] | timings->hblank[1] << 8) + 1; |
| unsigned hsync = (timings->hsync[0] | (timings->hsync[1] & 0x7f) << 8) + 1; |
| unsigned hsync_width = (timings->hsw[0] | timings->hsw[1] << 8) + 1; |
| unsigned vactive = (timings->vactive[0] | timings->vactive[1] << 8) + 1; |
| unsigned vblank = (timings->vblank[0] | timings->vblank[1] << 8) + 1; |
| unsigned vsync = (timings->vsync[0] | (timings->vsync[1] & 0x7f) << 8) + 1; |
| unsigned vsync_width = (timings->vsw[0] | timings->vsw[1] << 8) + 1; |
| bool hsync_positive = (timings->hsync[1] >> 7) & 0x1; |
| bool vsync_positive = (timings->vsync[1] >> 7) & 0x1; |
| |
| mode = drm_mode_create(dev); |
| if (!mode) |
| return NULL; |
| |
| /* resolution is kHz for type VII, and 10 kHz for type I */ |
| mode->clock = type_7 ? pixel_clock : pixel_clock * 10; |
| mode->hdisplay = hactive; |
| mode->hsync_start = mode->hdisplay + hsync; |
| mode->hsync_end = mode->hsync_start + hsync_width; |
| mode->htotal = mode->hdisplay + hblank; |
| |
| mode->vdisplay = vactive; |
| mode->vsync_start = mode->vdisplay + vsync; |
| mode->vsync_end = mode->vsync_start + vsync_width; |
| mode->vtotal = mode->vdisplay + vblank; |
| |
| mode->flags = 0; |
| mode->flags |= hsync_positive ? DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC; |
| mode->flags |= vsync_positive ? DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC; |
| mode->type = DRM_MODE_TYPE_DRIVER; |
| |
| if (timings->flags & 0x80) |
| mode->type |= DRM_MODE_TYPE_PREFERRED; |
| drm_mode_set_name(mode); |
| |
| return mode; |
| } |
| |
| static int add_displayid_detailed_1_modes(struct drm_connector *connector, |
| const struct displayid_block *block) |
| { |
| struct displayid_detailed_timing_block *det = (struct displayid_detailed_timing_block *)block; |
| int i; |
| int num_timings; |
| struct drm_display_mode *newmode; |
| int num_modes = 0; |
| bool type_7 = block->tag == DATA_BLOCK_2_TYPE_7_DETAILED_TIMING; |
| /* blocks must be multiple of 20 bytes length */ |
| if (block->num_bytes % 20) |
| return 0; |
| |
| num_timings = block->num_bytes / 20; |
| for (i = 0; i < num_timings; i++) { |
| struct displayid_detailed_timings_1 *timings = &det->timings[i]; |
| |
| newmode = drm_mode_displayid_detailed(connector->dev, timings, type_7); |
| if (!newmode) |
| continue; |
| |
| drm_mode_probed_add(connector, newmode); |
| num_modes++; |
| } |
| return num_modes; |
| } |
| |
| static int add_displayid_detailed_modes(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| const struct displayid_block *block; |
| struct displayid_iter iter; |
| int num_modes = 0; |
| |
| displayid_iter_edid_begin(drm_edid, &iter); |
| displayid_iter_for_each(block, &iter) { |
| if (block->tag == DATA_BLOCK_TYPE_1_DETAILED_TIMING || |
| block->tag == DATA_BLOCK_2_TYPE_7_DETAILED_TIMING) |
| num_modes += add_displayid_detailed_1_modes(connector, block); |
| } |
| displayid_iter_end(&iter); |
| |
| return num_modes; |
| } |
| |
| static int _drm_edid_connector_add_modes(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| const struct drm_display_info *info = &connector->display_info; |
| int num_modes = 0; |
| |
| if (!drm_edid) |
| return 0; |
| |
| /* |
| * EDID spec says modes should be preferred in this order: |
| * - preferred detailed mode |
| * - other detailed modes from base block |
| * - detailed modes from extension blocks |
| * - CVT 3-byte code modes |
| * - standard timing codes |
| * - established timing codes |
| * - modes inferred from GTF or CVT range information |
| * |
| * We get this pretty much right. |
| * |
| * XXX order for additional mode types in extension blocks? |
| */ |
| num_modes += add_detailed_modes(connector, drm_edid); |
| num_modes += add_cvt_modes(connector, drm_edid); |
| num_modes += add_standard_modes(connector, drm_edid); |
| num_modes += add_established_modes(connector, drm_edid); |
| num_modes += add_cea_modes(connector, drm_edid); |
| num_modes += add_alternate_cea_modes(connector, drm_edid); |
| num_modes += add_displayid_detailed_modes(connector, drm_edid); |
| if (drm_edid->edid->features & DRM_EDID_FEATURE_CONTINUOUS_FREQ) |
| num_modes += add_inferred_modes(connector, drm_edid); |
| |
| if (info->quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75)) |
| edid_fixup_preferred(connector); |
| |
| return num_modes; |
| } |
| |
| static void _drm_update_tile_info(struct drm_connector *connector, |
| const struct drm_edid *drm_edid); |
| |
| static int _drm_edid_connector_property_update(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| struct drm_device *dev = connector->dev; |
| int ret; |
| |
| if (connector->edid_blob_ptr) { |
| const struct edid *old_edid = connector->edid_blob_ptr->data; |
| |
| if (old_edid) { |
| if (!drm_edid_are_equal(drm_edid ? drm_edid->edid : NULL, old_edid)) { |
| connector->epoch_counter++; |
| drm_dbg_kms(dev, "[CONNECTOR:%d:%s] EDID changed, epoch counter %llu\n", |
| connector->base.id, connector->name, |
| connector->epoch_counter); |
| } |
| } |
| } |
| |
| ret = drm_property_replace_global_blob(dev, |
| &connector->edid_blob_ptr, |
| drm_edid ? drm_edid->size : 0, |
| drm_edid ? drm_edid->edid : NULL, |
| &connector->base, |
| dev->mode_config.edid_property); |
| if (ret) { |
| drm_dbg_kms(dev, "[CONNECTOR:%d:%s] EDID property update failed (%d)\n", |
| connector->base.id, connector->name, ret); |
| goto out; |
| } |
| |
| ret = drm_object_property_set_value(&connector->base, |
| dev->mode_config.non_desktop_property, |
| connector->display_info.non_desktop); |
| if (ret) { |
| drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Non-desktop property update failed (%d)\n", |
| connector->base.id, connector->name, ret); |
| goto out; |
| } |
| |
| ret = drm_connector_set_tile_property(connector); |
| if (ret) { |
| drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Tile property update failed (%d)\n", |
| connector->base.id, connector->name, ret); |
| goto out; |
| } |
| |
| out: |
| return ret; |
| } |
| |
| /** |
| * drm_edid_connector_update - Update connector information from EDID |
| * @connector: Connector |
| * @drm_edid: EDID |
| * |
| * Update the connector display info, ELD, HDR metadata, relevant properties, |
| * etc. from the passed in EDID. |
| * |
| * If EDID is NULL, reset the information. |
| * |
| * Must be called before calling drm_edid_connector_add_modes(). |
| * |
| * Return: 0 on success, negative error on errors. |
| */ |
| int drm_edid_connector_update(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| update_display_info(connector, drm_edid); |
| |
| _drm_update_tile_info(connector, drm_edid); |
| |
| return _drm_edid_connector_property_update(connector, drm_edid); |
| } |
| EXPORT_SYMBOL(drm_edid_connector_update); |
| |
| /** |
| * drm_edid_connector_add_modes - Update probed modes from the EDID property |
| * @connector: Connector |
| * |
| * Add the modes from the previously updated EDID property to the connector |
| * probed modes list. |
| * |
| * drm_edid_connector_update() must have been called before this to update the |
| * EDID property. |
| * |
| * Return: The number of modes added, or 0 if we couldn't find any. |
| */ |
| int drm_edid_connector_add_modes(struct drm_connector *connector) |
| { |
| const struct drm_edid *drm_edid = NULL; |
| int count; |
| |
| if (connector->edid_blob_ptr) |
| drm_edid = drm_edid_alloc(connector->edid_blob_ptr->data, |
| connector->edid_blob_ptr->length); |
| |
| count = _drm_edid_connector_add_modes(connector, drm_edid); |
| |
| drm_edid_free(drm_edid); |
| |
| return count; |
| } |
| EXPORT_SYMBOL(drm_edid_connector_add_modes); |
| |
| /** |
| * drm_connector_update_edid_property - update the edid property of a connector |
| * @connector: drm connector |
| * @edid: new value of the edid property |
| * |
| * This function creates a new blob modeset object and assigns its id to the |
| * connector's edid property. |
| * Since we also parse tile information from EDID's displayID block, we also |
| * set the connector's tile property here. See drm_connector_set_tile_property() |
| * for more details. |
| * |
| * This function is deprecated. Use drm_edid_connector_update() instead. |
| * |
| * Returns: |
| * Zero on success, negative errno on failure. |
| */ |
| int drm_connector_update_edid_property(struct drm_connector *connector, |
| const struct edid *edid) |
| { |
| struct drm_edid drm_edid; |
| |
| return drm_edid_connector_update(connector, drm_edid_legacy_init(&drm_edid, edid)); |
| } |
| EXPORT_SYMBOL(drm_connector_update_edid_property); |
| |
| /** |
| * drm_add_edid_modes - add modes from EDID data, if available |
| * @connector: connector we're probing |
| * @edid: EDID data |
| * |
| * Add the specified modes to the connector's mode list. Also fills out the |
| * &drm_display_info structure and ELD in @connector with any information which |
| * can be derived from the edid. |
| * |
| * This function is deprecated. Use drm_edid_connector_add_modes() instead. |
| * |
| * Return: The number of modes added or 0 if we couldn't find any. |
| */ |
| int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid) |
| { |
| struct drm_edid _drm_edid; |
| const struct drm_edid *drm_edid; |
| |
| if (edid && !drm_edid_is_valid(edid)) { |
| drm_warn(connector->dev, "[CONNECTOR:%d:%s] EDID invalid.\n", |
| connector->base.id, connector->name); |
| edid = NULL; |
| } |
| |
| drm_edid = drm_edid_legacy_init(&_drm_edid, edid); |
| |
| update_display_info(connector, drm_edid); |
| |
| return _drm_edid_connector_add_modes(connector, drm_edid); |
| } |
| EXPORT_SYMBOL(drm_add_edid_modes); |
| |
| /** |
| * drm_add_modes_noedid - add modes for the connectors without EDID |
| * @connector: connector we're probing |
| * @hdisplay: the horizontal display limit |
| * @vdisplay: the vertical display limit |
| * |
| * Add the specified modes to the connector's mode list. Only when the |
| * hdisplay/vdisplay is not beyond the given limit, it will be added. |
| * |
| * Return: The number of modes added or 0 if we couldn't find any. |
| */ |
| int drm_add_modes_noedid(struct drm_connector *connector, |
| int hdisplay, int vdisplay) |
| { |
| int i, count, num_modes = 0; |
| struct drm_display_mode *mode; |
| struct drm_device *dev = connector->dev; |
| |
| count = ARRAY_SIZE(drm_dmt_modes); |
| if (hdisplay < 0) |
| hdisplay = 0; |
| if (vdisplay < 0) |
| vdisplay = 0; |
| |
| for (i = 0; i < count; i++) { |
| const struct drm_display_mode *ptr = &drm_dmt_modes[i]; |
| |
| if (hdisplay && vdisplay) { |
| /* |
| * Only when two are valid, they will be used to check |
| * whether the mode should be added to the mode list of |
| * the connector. |
| */ |
| if (ptr->hdisplay > hdisplay || |
| ptr->vdisplay > vdisplay) |
| continue; |
| } |
| if (drm_mode_vrefresh(ptr) > 61) |
| continue; |
| mode = drm_mode_duplicate(dev, ptr); |
| if (mode) { |
| drm_mode_probed_add(connector, mode); |
| num_modes++; |
| } |
| } |
| return num_modes; |
| } |
| EXPORT_SYMBOL(drm_add_modes_noedid); |
| |
| /** |
| * drm_set_preferred_mode - Sets the preferred mode of a connector |
| * @connector: connector whose mode list should be processed |
| * @hpref: horizontal resolution of preferred mode |
| * @vpref: vertical resolution of preferred mode |
| * |
| * Marks a mode as preferred if it matches the resolution specified by @hpref |
| * and @vpref. |
| */ |
| void drm_set_preferred_mode(struct drm_connector *connector, |
| int hpref, int vpref) |
| { |
| struct drm_display_mode *mode; |
| |
| list_for_each_entry(mode, &connector->probed_modes, head) { |
| if (mode->hdisplay == hpref && |
| mode->vdisplay == vpref) |
| mode->type |= DRM_MODE_TYPE_PREFERRED; |
| } |
| } |
| EXPORT_SYMBOL(drm_set_preferred_mode); |
| |
| static bool is_hdmi2_sink(const struct drm_connector *connector) |
| { |
| /* |
| * FIXME: sil-sii8620 doesn't have a connector around when |
| * we need one, so we have to be prepared for a NULL connector. |
| */ |
| if (!connector) |
| return true; |
| |
| return connector->display_info.hdmi.scdc.supported || |
| connector->display_info.color_formats & DRM_COLOR_FORMAT_YCBCR420; |
| } |
| |
| static u8 drm_mode_hdmi_vic(const struct drm_connector *connector, |
| const struct drm_display_mode *mode) |
| { |
| bool has_hdmi_infoframe = connector ? |
| connector->display_info.has_hdmi_infoframe : false; |
| |
| if (!has_hdmi_infoframe) |
| return 0; |
| |
| /* No HDMI VIC when signalling 3D video format */ |
| if (mode->flags & DRM_MODE_FLAG_3D_MASK) |
| return 0; |
| |
| return drm_match_hdmi_mode(mode); |
| } |
| |
| static u8 drm_mode_cea_vic(const struct drm_connector *connector, |
| const struct drm_display_mode *mode) |
| { |
| /* |
| * HDMI spec says if a mode is found in HDMI 1.4b 4K modes |
| * we should send its VIC in vendor infoframes, else send the |
| * VIC in AVI infoframes. Lets check if this mode is present in |
| * HDMI 1.4b 4K modes |
| */ |
| if (drm_mode_hdmi_vic(connector, mode)) |
| return 0; |
| |
| return drm_match_cea_mode(mode); |
| } |
| |
| /* |
| * Avoid sending VICs defined in HDMI 2.0 in AVI infoframes to sinks that |
| * conform to HDMI 1.4. |
| * |
| * HDMI 1.4 (CTA-861-D) VIC range: [1..64] |
| * HDMI 2.0 (CTA-861-F) VIC range: [1..107] |
| * |
| * If the sink lists the VIC in CTA VDB, assume it's fine, regardless of HDMI |
| * version. |
| */ |
| static u8 vic_for_avi_infoframe(const struct drm_connector *connector, u8 vic) |
| { |
| if (!is_hdmi2_sink(connector) && vic > 64 && |
| !cta_vdb_has_vic(connector, vic)) |
| return 0; |
| |
| return vic; |
| } |
| |
| /** |
| * drm_hdmi_avi_infoframe_from_display_mode() - fill an HDMI AVI infoframe with |
| * data from a DRM display mode |
| * @frame: HDMI AVI infoframe |
| * @connector: the connector |
| * @mode: DRM display mode |
| * |
| * Return: 0 on success or a negative error code on failure. |
| */ |
| int |
| drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, |
| const struct drm_connector *connector, |
| const struct drm_display_mode *mode) |
| { |
| enum hdmi_picture_aspect picture_aspect; |
| u8 vic, hdmi_vic; |
| |
| if (!frame || !mode) |
| return -EINVAL; |
| |
| hdmi_avi_infoframe_init(frame); |
| |
| if (mode->flags & DRM_MODE_FLAG_DBLCLK) |
| frame->pixel_repeat = 1; |
| |
| vic = drm_mode_cea_vic(connector, mode); |
| hdmi_vic = drm_mode_hdmi_vic(connector, mode); |
| |
| frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE; |
| |
| /* |
| * As some drivers don't support atomic, we can't use connector state. |
| * So just initialize the frame with default values, just the same way |
| * as it's done with other properties here. |
| */ |
| frame->content_type = HDMI_CONTENT_TYPE_GRAPHICS; |
| frame->itc = 0; |
| |
| /* |
| * Populate picture aspect ratio from either |
| * user input (if specified) or from the CEA/HDMI mode lists. |
| */ |
| picture_aspect = mode->picture_aspect_ratio; |
| if (picture_aspect == HDMI_PICTURE_ASPECT_NONE) { |
| if (vic) |
| picture_aspect = drm_get_cea_aspect_ratio(vic); |
| else if (hdmi_vic) |
| picture_aspect = drm_get_hdmi_aspect_ratio(hdmi_vic); |
| } |
| |
| /* |
| * The infoframe can't convey anything but none, 4:3 |
| * and 16:9, so if the user has asked for anything else |
| * we can only satisfy it by specifying the right VIC. |
| */ |
| if (picture_aspect > HDMI_PICTURE_ASPECT_16_9) { |
| if (vic) { |
| if (picture_aspect != drm_get_cea_aspect_ratio(vic)) |
| return -EINVAL; |
| } else if (hdmi_vic) { |
| if (picture_aspect != drm_get_hdmi_aspect_ratio(hdmi_vic)) |
| return -EINVAL; |
| } else { |
| return -EINVAL; |
| } |
| |
| picture_aspect = HDMI_PICTURE_ASPECT_NONE; |
| } |
| |
| frame->video_code = vic_for_avi_infoframe(connector, vic); |
| frame->picture_aspect = picture_aspect; |
| frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE; |
| frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(drm_hdmi_avi_infoframe_from_display_mode); |
| |
| /** |
| * drm_hdmi_avi_infoframe_quant_range() - fill the HDMI AVI infoframe |
| * quantization range information |
| * @frame: HDMI AVI infoframe |
| * @connector: the connector |
| * @mode: DRM display mode |
| * @rgb_quant_range: RGB quantization range (Q) |
| */ |
| void |
| drm_hdmi_avi_infoframe_quant_range(struct hdmi_avi_infoframe *frame, |
| const struct drm_connector *connector, |
| const struct drm_display_mode *mode, |
| enum hdmi_quantization_range rgb_quant_range) |
| { |
| const struct drm_display_info *info = &connector->display_info; |
| |
| /* |
| * CEA-861: |
| * "A Source shall not send a non-zero Q value that does not correspond |
| * to the default RGB Quantization Range for the transmitted Picture |
| * unless the Sink indicates support for the Q bit in a Video |
| * Capabilities Data Block." |
| * |
| * HDMI 2.0 recommends sending non-zero Q when it does match the |
| * default RGB quantization range for the mode, even when QS=0. |
| */ |
| if (info->rgb_quant_range_selectable || |
| rgb_quant_range == drm_default_rgb_quant_range(mode)) |
| frame->quantization_range = rgb_quant_range; |
| else |
| frame->quantization_range = HDMI_QUANTIZATION_RANGE_DEFAULT; |
| |
| /* |
| * CEA-861-F: |
| * "When transmitting any RGB colorimetry, the Source should set the |
| * YQ-field to match the RGB Quantization Range being transmitted |
| * (e.g., when Limited Range RGB, set YQ=0 or when Full Range RGB, |
| * set YQ=1) and the Sink shall ignore the YQ-field." |
| * |
| * Unfortunate certain sinks (eg. VIZ Model 67/E261VA) get confused |
| * by non-zero YQ when receiving RGB. There doesn't seem to be any |
| * good way to tell which version of CEA-861 the sink supports, so |
| * we limit non-zero YQ to HDMI 2.0 sinks only as HDMI 2.0 is based |
| * on CEA-861-F. |
| */ |
| if (!is_hdmi2_sink(connector) || |
| rgb_quant_range == HDMI_QUANTIZATION_RANGE_LIMITED) |
| frame->ycc_quantization_range = |
| HDMI_YCC_QUANTIZATION_RANGE_LIMITED; |
| else |
| frame->ycc_quantization_range = |
| HDMI_YCC_QUANTIZATION_RANGE_FULL; |
| } |
| EXPORT_SYMBOL(drm_hdmi_avi_infoframe_quant_range); |
| |
| static enum hdmi_3d_structure |
| s3d_structure_from_display_mode(const struct drm_display_mode *mode) |
| { |
| u32 layout = mode->flags & DRM_MODE_FLAG_3D_MASK; |
| |
| switch (layout) { |
| case DRM_MODE_FLAG_3D_FRAME_PACKING: |
| return HDMI_3D_STRUCTURE_FRAME_PACKING; |
| case DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: |
| return HDMI_3D_STRUCTURE_FIELD_ALTERNATIVE; |
| case DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: |
| return HDMI_3D_STRUCTURE_LINE_ALTERNATIVE; |
| case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: |
| return HDMI_3D_STRUCTURE_SIDE_BY_SIDE_FULL; |
| case DRM_MODE_FLAG_3D_L_DEPTH: |
| return HDMI_3D_STRUCTURE_L_DEPTH; |
| case DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: |
| return HDMI_3D_STRUCTURE_L_DEPTH_GFX_GFX_DEPTH; |
| case DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: |
| return HDMI_3D_STRUCTURE_TOP_AND_BOTTOM; |
| case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: |
| return HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF; |
| default: |
| return HDMI_3D_STRUCTURE_INVALID; |
| } |
| } |
| |
| /** |
| * drm_hdmi_vendor_infoframe_from_display_mode() - fill an HDMI infoframe with |
| * data from a DRM display mode |
| * @frame: HDMI vendor infoframe |
| * @connector: the connector |
| * @mode: DRM display mode |
| * |
| * Note that there's is a need to send HDMI vendor infoframes only when using a |
| * 4k or stereoscopic 3D mode. So when giving any other mode as input this |
| * function will return -EINVAL, error that can be safely ignored. |
| * |
| * Return: 0 on success or a negative error code on failure. |
| */ |
| int |
| drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame, |
| const struct drm_connector *connector, |
| const struct drm_display_mode *mode) |
| { |
| /* |
| * FIXME: sil-sii8620 doesn't have a connector around when |
| * we need one, so we have to be prepared for a NULL connector. |
| */ |
| bool has_hdmi_infoframe = connector ? |
| connector->display_info.has_hdmi_infoframe : false; |
| int err; |
| |
| if (!frame || !mode) |
| return -EINVAL; |
| |
| if (!has_hdmi_infoframe) |
| return -EINVAL; |
| |
| err = hdmi_vendor_infoframe_init(frame); |
| if (err < 0) |
| return err; |
| |
| /* |
| * Even if it's not absolutely necessary to send the infoframe |
| * (ie.vic==0 and s3d_struct==0) we will still send it if we |
| * know that the sink can handle it. This is based on a |
| * suggestion in HDMI 2.0 Appendix F. Apparently some sinks |
| * have trouble realizing that they should switch from 3D to 2D |
| * mode if the source simply stops sending the infoframe when |
| * it wants to switch from 3D to 2D. |
| */ |
| frame->vic = drm_mode_hdmi_vic(connector, mode); |
| frame->s3d_struct = s3d_structure_from_display_mode(mode); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(drm_hdmi_vendor_infoframe_from_display_mode); |
| |
| static void drm_parse_tiled_block(struct drm_connector *connector, |
| const struct displayid_block *block) |
| { |
| const struct displayid_tiled_block *tile = (struct displayid_tiled_block *)block; |
| u16 w, h; |
| u8 tile_v_loc, tile_h_loc; |
| u8 num_v_tile, num_h_tile; |
| struct drm_tile_group *tg; |
| |
| w = tile->tile_size[0] | tile->tile_size[1] << 8; |
| h = tile->tile_size[2] | tile->tile_size[3] << 8; |
| |
| num_v_tile = (tile->topo[0] & 0xf) | (tile->topo[2] & 0x30); |
| num_h_tile = (tile->topo[0] >> 4) | ((tile->topo[2] >> 2) & 0x30); |
| tile_v_loc = (tile->topo[1] & 0xf) | ((tile->topo[2] & 0x3) << 4); |
| tile_h_loc = (tile->topo[1] >> 4) | (((tile->topo[2] >> 2) & 0x3) << 4); |
| |
| connector->has_tile = true; |
| if (tile->tile_cap & 0x80) |
| connector->tile_is_single_monitor = true; |
| |
| connector->num_h_tile = num_h_tile + 1; |
| connector->num_v_tile = num_v_tile + 1; |
| connector->tile_h_loc = tile_h_loc; |
| connector->tile_v_loc = tile_v_loc; |
| connector->tile_h_size = w + 1; |
| connector->tile_v_size = h + 1; |
| |
| drm_dbg_kms(connector->dev, |
| "[CONNECTOR:%d:%s] tile cap 0x%x, size %dx%d, num tiles %dx%d, location %dx%d, vend %c%c%c", |
| connector->base.id, connector->name, |
| tile->tile_cap, |
| connector->tile_h_size, connector->tile_v_size, |
| connector->num_h_tile, connector->num_v_tile, |
| connector->tile_h_loc, connector->tile_v_loc, |
| tile->topology_id[0], tile->topology_id[1], tile->topology_id[2]); |
| |
| tg = drm_mode_get_tile_group(connector->dev, tile->topology_id); |
| if (!tg) |
| tg = drm_mode_create_tile_group(connector->dev, tile->topology_id); |
| if (!tg) |
| return; |
| |
| if (connector->tile_group != tg) { |
| /* if we haven't got a pointer, |
| take the reference, drop ref to old tile group */ |
| if (connector->tile_group) |
| drm_mode_put_tile_group(connector->dev, connector->tile_group); |
| connector->tile_group = tg; |
| } else { |
| /* if same tile group, then release the ref we just took. */ |
| drm_mode_put_tile_group(connector->dev, tg); |
| } |
| } |
| |
| static bool displayid_is_tiled_block(const struct displayid_iter *iter, |
| const struct displayid_block *block) |
| { |
| return (displayid_version(iter) == DISPLAY_ID_STRUCTURE_VER_12 && |
| block->tag == DATA_BLOCK_TILED_DISPLAY) || |
| (displayid_version(iter) == DISPLAY_ID_STRUCTURE_VER_20 && |
| block->tag == DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY); |
| } |
| |
| static void _drm_update_tile_info(struct drm_connector *connector, |
| const struct drm_edid *drm_edid) |
| { |
| const struct displayid_block *block; |
| struct displayid_iter iter; |
| |
| connector->has_tile = false; |
| |
| displayid_iter_edid_begin(drm_edid, &iter); |
| displayid_iter_for_each(block, &iter) { |
| if (displayid_is_tiled_block(&iter, block)) |
| drm_parse_tiled_block(connector, block); |
| } |
| displayid_iter_end(&iter); |
| |
| if (!connector->has_tile && connector->tile_group) { |
| drm_mode_put_tile_group(connector->dev, connector->tile_group); |
| connector->tile_group = NULL; |
| } |
| } |