blob: 6fc65e8db2206810ae34b14f48916aed4b2f00b7 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
/dts-v1/;
#include "sun50i-h6.dtsi"
#include "sun50i-h6-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "OrangePi 3";
compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6";
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
chosen {
stdout-path = "serial0:115200n8";
};
connector {
compatible = "hdmi-connector";
ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
ext_osc32k: ext_osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "ext_osc32k";
};
leds {
compatible = "gpio-leds";
led-0 {
label = "orangepi:red:power";
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
default-state = "on";
};
led-1 {
label = "orangepi:green:status";
gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
};
};
reg_vcc5v: vcc5v {
/* board wide 5V supply directly from the DC jack */
compatible = "regulator-fixed";
regulator-name = "vcc-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_vcc33_wifi: vcc33-wifi {
/* Always on 3.3V regulator for WiFi and BT */
compatible = "regulator-fixed";
regulator-name = "vcc33-wifi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
vin-supply = <&reg_vcc5v>;
};
reg_vcc_wifi_io: vcc-wifi-io {
/* Always on 1.8V/300mA regulator for WiFi and BT IO */
compatible = "regulator-fixed";
regulator-name = "vcc-wifi-io";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
vin-supply = <&reg_vcc33_wifi>;
};
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
post-power-on-delay-ms = <200>;
};
};
&cpu0 {
cpu-supply = <&reg_dcdca>;
};
&de {
status = "okay";
};
&dwc3 {
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci3 {
status = "okay";
};
&gpu {
mali-supply = <&reg_dcdcc>;
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mmc0 {
vmmc-supply = <&reg_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
bus-width = <4>;
status = "okay";
};
&mmc1 {
vmmc-supply = <&reg_vcc33_wifi>;
vqmmc-supply = <&reg_vcc_wifi_io>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
brcm: sdio-wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&r_pio>;
interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
interrupt-names = "host-wake";
};
};
&mmc2 {
vmmc-supply = <&reg_cldo1>;
vqmmc-supply = <&reg_bldo2>;
cap-mmc-hw-reset;
non-removable;
bus-width = <8>;
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci3 {
status = "okay";
};
&pio {
vcc-pc-supply = <&reg_bldo2>;
vcc-pd-supply = <&reg_cldo1>;
vcc-pg-supply = <&reg_vcc_wifi_io>;
};
&r_ir {
status = "okay";
};
&r_rsb {
status = "okay";
axp805: pmic@745 {
compatible = "x-powers,axp805", "x-powers,axp806";
reg = <0x745>;
interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
x-powers,self-working-mode;
vina-supply = <&reg_vcc5v>;
vinb-supply = <&reg_vcc5v>;
vinc-supply = <&reg_vcc5v>;
vind-supply = <&reg_vcc5v>;
vine-supply = <&reg_vcc5v>;
aldoin-supply = <&reg_vcc5v>;
bldoin-supply = <&reg_vcc5v>;
cldoin-supply = <&reg_vcc5v>;
regulators {
reg_aldo1: aldo1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl-led-ir";
};
reg_aldo2: aldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc33-audio-tv-ephy-mac";
};
/* ALDO3 is shorted to CLDO1 */
reg_aldo3: aldo3 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
};
reg_bldo1: bldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18-dram-bias-pll";
};
reg_bldo2: bldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-efuse-pcie-hdmi-pc";
};
bldo3 {
/* unused */
};
bldo4 {
/* unused */
};
reg_cldo1: cldo1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
};
cldo2 {
/* unused */
};
cldo3 {
/* unused */
};
reg_dcdca: dcdca {
regulator-always-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1160000>;
regulator-ramp-delay = <2500>;
regulator-name = "vdd-cpu";
};
reg_dcdcc: dcdcc {
regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-ramp-delay = <2500>;
regulator-name = "vdd-gpu";
};
reg_dcdcd: dcdcd {
regulator-always-on;
regulator-min-microvolt = <960000>;
regulator-max-microvolt = <960000>;
regulator-name = "vdd-sys";
};
reg_dcdce: dcdce {
regulator-always-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-dram";
};
sw {
/* unused */
};
};
};
};
&rtc {
clocks = <&ext_osc32k>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
/* There's the BT part of the AP6256 connected to that UART */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "brcm,bcm4345c5";
clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "lpo";
device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
max-speed = <1500000>;
};
};
&usb2otg {
/*
* This board doesn't have a controllable VBUS even though it
* does have an ID pin. Using it as anything but a USB host is
* unsafe.
*/
dr_mode = "host";
status = "okay";
};
&usb2phy {
usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
usb0_vbus-supply = <&reg_vcc5v>;
usb3_vbus-supply = <&reg_vcc5v>;
status = "okay";
};
&usb3phy {
status = "okay";
};