blob: 4d721197d837e10948e6dcbd8403925efb1d5b56 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Device Tree file for LX2160AQDS
//
// Copyright 2018 NXP
/dts-v1/;
#include "fsl-lx2160a.dtsi"
/ {
model = "NXP Layerscape LX2160AQDS";
compatible = "fsl,lx2160a-qds", "fsl,lx2160a";
aliases {
crypto = &crypto;
mmc0 = &esdhc0;
mmc1 = &esdhc1;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
sb_3v3: regulator-sb3v3 {
compatible = "regulator-fixed";
regulator-name = "MC34717-3.3VSB";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
mdio-mux-1 {
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 0>;
mdio-parent-bus = <&emdio1>;
#address-cells = <1>;
#size-cells = <0>;
mdio@0 { /* On-board PHY #1 RGMI1*/
reg = <0x00>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@8 { /* On-board PHY #2 RGMI2*/
reg = <0x8>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@18 { /* Slot #1 */
reg = <0x18>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@19 { /* Slot #2 */
reg = <0x19>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1a { /* Slot #3 */
reg = <0x1a>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1b { /* Slot #4 */
reg = <0x1b>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1c { /* Slot #5 */
reg = <0x1c>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1d { /* Slot #6 */
reg = <0x1d>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1e { /* Slot #7 */
reg = <0x1e>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1f { /* Slot #8 */
reg = <0x1f>;
#address-cells = <1>;
#size-cells = <0>;
};
};
mdio-mux-2 {
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 1>;
mdio-parent-bus = <&emdio2>;
#address-cells = <1>;
#size-cells = <0>;
mdio@0 { /* Slot #1 (secondary EMI) */
reg = <0x00>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1 { /* Slot #2 (secondary EMI) */
reg = <0x01>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@2 { /* Slot #3 (secondary EMI) */
reg = <0x02>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@3 { /* Slot #4 (secondary EMI) */
reg = <0x03>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@4 { /* Slot #5 (secondary EMI) */
reg = <0x04>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@5 { /* Slot #6 (secondary EMI) */
reg = <0x05>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@6 { /* Slot #7 (secondary EMI) */
reg = <0x06>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@7 { /* Slot #8 (secondary EMI) */
reg = <0x07>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&can0 {
status = "okay";
};
&can1 {
status = "okay";
};
&crypto {
status = "okay";
};
&dspi0 {
status = "okay";
dflash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
&dspi1 {
status = "okay";
dflash1: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
&dspi2 {
status = "okay";
dflash2: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
&emdio1 {
status = "okay";
};
&emdio2 {
status = "okay";
};
&esdhc0 {
status = "okay";
};
&esdhc1 {
status = "okay";
};
&fspi {
status = "okay";
mt35xu512aba0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
m25p,fast-read;
spi-max-frequency = <50000000>;
reg = <0>;
spi-rx-bus-width = <8>;
spi-tx-bus-width = <8>;
};
};
&i2c0 {
status = "okay";
fpga@66 {
compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
"simple-mfd";
reg = <0x66>;
mux: mux-controller {
compatible = "reg-mux";
#mux-control-cells = <1>;
mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
<0x54 0x07>; /* 1: reg 0x54, bit 2:0 */
};
};
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
power-monitor@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <500>;
};
power-monitor@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
temperature-sensor@4c {
compatible = "nxp,sa56004";
reg = <0x4c>;
vcc-supply = <&sb_3v3>;
};
temperature-sensor@4d {
compatible = "nxp,sa56004";
reg = <0x4d>;
vcc-supply = <&sb_3v3>;
};
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
};
};
};
};
&optee {
status = "okay";
};
&sata0 {
status = "okay";
};
&sata1 {
status = "okay";
};
&sata2 {
status = "okay";
};
&sata3 {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};