| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright (c) 2018, Intel Corporation. */ |
| |
| #include "ice_common.h" |
| |
| #define ICE_CQ_INIT_REGS(qinfo, prefix) \ |
| do { \ |
| (qinfo)->sq.head = prefix##_ATQH; \ |
| (qinfo)->sq.tail = prefix##_ATQT; \ |
| (qinfo)->sq.len = prefix##_ATQLEN; \ |
| (qinfo)->sq.bah = prefix##_ATQBAH; \ |
| (qinfo)->sq.bal = prefix##_ATQBAL; \ |
| (qinfo)->sq.len_mask = prefix##_ATQLEN_ATQLEN_M; \ |
| (qinfo)->sq.len_ena_mask = prefix##_ATQLEN_ATQENABLE_M; \ |
| (qinfo)->sq.head_mask = prefix##_ATQH_ATQH_M; \ |
| (qinfo)->rq.head = prefix##_ARQH; \ |
| (qinfo)->rq.tail = prefix##_ARQT; \ |
| (qinfo)->rq.len = prefix##_ARQLEN; \ |
| (qinfo)->rq.bah = prefix##_ARQBAH; \ |
| (qinfo)->rq.bal = prefix##_ARQBAL; \ |
| (qinfo)->rq.len_mask = prefix##_ARQLEN_ARQLEN_M; \ |
| (qinfo)->rq.len_ena_mask = prefix##_ARQLEN_ARQENABLE_M; \ |
| (qinfo)->rq.head_mask = prefix##_ARQH_ARQH_M; \ |
| } while (0) |
| |
| /** |
| * ice_adminq_init_regs - Initialize AdminQ registers |
| * @hw: pointer to the hardware structure |
| * |
| * This assumes the alloc_sq and alloc_rq functions have already been called |
| */ |
| static void ice_adminq_init_regs(struct ice_hw *hw) |
| { |
| struct ice_ctl_q_info *cq = &hw->adminq; |
| |
| ICE_CQ_INIT_REGS(cq, PF_FW); |
| } |
| |
| /** |
| * ice_mailbox_init_regs - Initialize Mailbox registers |
| * @hw: pointer to the hardware structure |
| * |
| * This assumes the alloc_sq and alloc_rq functions have already been called |
| */ |
| static void ice_mailbox_init_regs(struct ice_hw *hw) |
| { |
| struct ice_ctl_q_info *cq = &hw->mailboxq; |
| |
| ICE_CQ_INIT_REGS(cq, PF_MBX); |
| } |
| |
| /** |
| * ice_check_sq_alive |
| * @hw: pointer to the HW struct |
| * @cq: pointer to the specific Control queue |
| * |
| * Returns true if Queue is enabled else false. |
| */ |
| bool ice_check_sq_alive(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| /* check both queue-length and queue-enable fields */ |
| if (cq->sq.len && cq->sq.len_mask && cq->sq.len_ena_mask) |
| return (rd32(hw, cq->sq.len) & (cq->sq.len_mask | |
| cq->sq.len_ena_mask)) == |
| (cq->num_sq_entries | cq->sq.len_ena_mask); |
| |
| return false; |
| } |
| |
| /** |
| * ice_alloc_ctrlq_sq_ring - Allocate Control Transmit Queue (ATQ) rings |
| * @hw: pointer to the hardware structure |
| * @cq: pointer to the specific Control queue |
| */ |
| static enum ice_status |
| ice_alloc_ctrlq_sq_ring(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| size_t size = cq->num_sq_entries * sizeof(struct ice_aq_desc); |
| |
| cq->sq.desc_buf.va = dmam_alloc_coherent(ice_hw_to_dev(hw), size, |
| &cq->sq.desc_buf.pa, |
| GFP_KERNEL | __GFP_ZERO); |
| if (!cq->sq.desc_buf.va) |
| return ICE_ERR_NO_MEMORY; |
| cq->sq.desc_buf.size = size; |
| |
| cq->sq.cmd_buf = devm_kcalloc(ice_hw_to_dev(hw), cq->num_sq_entries, |
| sizeof(struct ice_sq_cd), GFP_KERNEL); |
| if (!cq->sq.cmd_buf) { |
| dmam_free_coherent(ice_hw_to_dev(hw), cq->sq.desc_buf.size, |
| cq->sq.desc_buf.va, cq->sq.desc_buf.pa); |
| cq->sq.desc_buf.va = NULL; |
| cq->sq.desc_buf.pa = 0; |
| cq->sq.desc_buf.size = 0; |
| return ICE_ERR_NO_MEMORY; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_alloc_ctrlq_rq_ring - Allocate Control Receive Queue (ARQ) rings |
| * @hw: pointer to the hardware structure |
| * @cq: pointer to the specific Control queue |
| */ |
| static enum ice_status |
| ice_alloc_ctrlq_rq_ring(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| size_t size = cq->num_rq_entries * sizeof(struct ice_aq_desc); |
| |
| cq->rq.desc_buf.va = dmam_alloc_coherent(ice_hw_to_dev(hw), size, |
| &cq->rq.desc_buf.pa, |
| GFP_KERNEL | __GFP_ZERO); |
| if (!cq->rq.desc_buf.va) |
| return ICE_ERR_NO_MEMORY; |
| cq->rq.desc_buf.size = size; |
| return 0; |
| } |
| |
| /** |
| * ice_free_cq_ring - Free control queue ring |
| * @hw: pointer to the hardware structure |
| * @ring: pointer to the specific control queue ring |
| * |
| * This assumes the posted buffers have already been cleaned |
| * and de-allocated |
| */ |
| static void ice_free_cq_ring(struct ice_hw *hw, struct ice_ctl_q_ring *ring) |
| { |
| dmam_free_coherent(ice_hw_to_dev(hw), ring->desc_buf.size, |
| ring->desc_buf.va, ring->desc_buf.pa); |
| ring->desc_buf.va = NULL; |
| ring->desc_buf.pa = 0; |
| ring->desc_buf.size = 0; |
| } |
| |
| /** |
| * ice_alloc_rq_bufs - Allocate pre-posted buffers for the ARQ |
| * @hw: pointer to the hardware structure |
| * @cq: pointer to the specific Control queue |
| */ |
| static enum ice_status |
| ice_alloc_rq_bufs(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| int i; |
| |
| /* We'll be allocating the buffer info memory first, then we can |
| * allocate the mapped buffers for the event processing |
| */ |
| cq->rq.dma_head = devm_kcalloc(ice_hw_to_dev(hw), cq->num_rq_entries, |
| sizeof(cq->rq.desc_buf), GFP_KERNEL); |
| if (!cq->rq.dma_head) |
| return ICE_ERR_NO_MEMORY; |
| cq->rq.r.rq_bi = (struct ice_dma_mem *)cq->rq.dma_head; |
| |
| /* allocate the mapped buffers */ |
| for (i = 0; i < cq->num_rq_entries; i++) { |
| struct ice_aq_desc *desc; |
| struct ice_dma_mem *bi; |
| |
| bi = &cq->rq.r.rq_bi[i]; |
| bi->va = dmam_alloc_coherent(ice_hw_to_dev(hw), |
| cq->rq_buf_size, &bi->pa, |
| GFP_KERNEL | __GFP_ZERO); |
| if (!bi->va) |
| goto unwind_alloc_rq_bufs; |
| bi->size = cq->rq_buf_size; |
| |
| /* now configure the descriptors for use */ |
| desc = ICE_CTL_Q_DESC(cq->rq, i); |
| |
| desc->flags = cpu_to_le16(ICE_AQ_FLAG_BUF); |
| if (cq->rq_buf_size > ICE_AQ_LG_BUF) |
| desc->flags |= cpu_to_le16(ICE_AQ_FLAG_LB); |
| desc->opcode = 0; |
| /* This is in accordance with Admin queue design, there is no |
| * register for buffer size configuration |
| */ |
| desc->datalen = cpu_to_le16(bi->size); |
| desc->retval = 0; |
| desc->cookie_high = 0; |
| desc->cookie_low = 0; |
| desc->params.generic.addr_high = |
| cpu_to_le32(upper_32_bits(bi->pa)); |
| desc->params.generic.addr_low = |
| cpu_to_le32(lower_32_bits(bi->pa)); |
| desc->params.generic.param0 = 0; |
| desc->params.generic.param1 = 0; |
| } |
| return 0; |
| |
| unwind_alloc_rq_bufs: |
| /* don't try to free the one that failed... */ |
| i--; |
| for (; i >= 0; i--) { |
| dmam_free_coherent(ice_hw_to_dev(hw), cq->rq.r.rq_bi[i].size, |
| cq->rq.r.rq_bi[i].va, cq->rq.r.rq_bi[i].pa); |
| cq->rq.r.rq_bi[i].va = NULL; |
| cq->rq.r.rq_bi[i].pa = 0; |
| cq->rq.r.rq_bi[i].size = 0; |
| } |
| devm_kfree(ice_hw_to_dev(hw), cq->rq.dma_head); |
| |
| return ICE_ERR_NO_MEMORY; |
| } |
| |
| /** |
| * ice_alloc_sq_bufs - Allocate empty buffer structs for the ATQ |
| * @hw: pointer to the hardware structure |
| * @cq: pointer to the specific Control queue |
| */ |
| static enum ice_status |
| ice_alloc_sq_bufs(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| int i; |
| |
| /* No mapped memory needed yet, just the buffer info structures */ |
| cq->sq.dma_head = devm_kcalloc(ice_hw_to_dev(hw), cq->num_sq_entries, |
| sizeof(cq->sq.desc_buf), GFP_KERNEL); |
| if (!cq->sq.dma_head) |
| return ICE_ERR_NO_MEMORY; |
| cq->sq.r.sq_bi = (struct ice_dma_mem *)cq->sq.dma_head; |
| |
| /* allocate the mapped buffers */ |
| for (i = 0; i < cq->num_sq_entries; i++) { |
| struct ice_dma_mem *bi; |
| |
| bi = &cq->sq.r.sq_bi[i]; |
| bi->va = dmam_alloc_coherent(ice_hw_to_dev(hw), |
| cq->sq_buf_size, &bi->pa, |
| GFP_KERNEL | __GFP_ZERO); |
| if (!bi->va) |
| goto unwind_alloc_sq_bufs; |
| bi->size = cq->sq_buf_size; |
| } |
| return 0; |
| |
| unwind_alloc_sq_bufs: |
| /* don't try to free the one that failed... */ |
| i--; |
| for (; i >= 0; i--) { |
| dmam_free_coherent(ice_hw_to_dev(hw), cq->sq.r.sq_bi[i].size, |
| cq->sq.r.sq_bi[i].va, cq->sq.r.sq_bi[i].pa); |
| cq->sq.r.sq_bi[i].va = NULL; |
| cq->sq.r.sq_bi[i].pa = 0; |
| cq->sq.r.sq_bi[i].size = 0; |
| } |
| devm_kfree(ice_hw_to_dev(hw), cq->sq.dma_head); |
| |
| return ICE_ERR_NO_MEMORY; |
| } |
| |
| static enum ice_status |
| ice_cfg_cq_regs(struct ice_hw *hw, struct ice_ctl_q_ring *ring, u16 num_entries) |
| { |
| /* Clear Head and Tail */ |
| wr32(hw, ring->head, 0); |
| wr32(hw, ring->tail, 0); |
| |
| /* set starting point */ |
| wr32(hw, ring->len, (num_entries | ring->len_ena_mask)); |
| wr32(hw, ring->bal, lower_32_bits(ring->desc_buf.pa)); |
| wr32(hw, ring->bah, upper_32_bits(ring->desc_buf.pa)); |
| |
| /* Check one register to verify that config was applied */ |
| if (rd32(hw, ring->bal) != lower_32_bits(ring->desc_buf.pa)) |
| return ICE_ERR_AQ_ERROR; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_cfg_sq_regs - configure Control ATQ registers |
| * @hw: pointer to the hardware structure |
| * @cq: pointer to the specific Control queue |
| * |
| * Configure base address and length registers for the transmit queue |
| */ |
| static enum ice_status |
| ice_cfg_sq_regs(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| return ice_cfg_cq_regs(hw, &cq->sq, cq->num_sq_entries); |
| } |
| |
| /** |
| * ice_cfg_rq_regs - configure Control ARQ register |
| * @hw: pointer to the hardware structure |
| * @cq: pointer to the specific Control queue |
| * |
| * Configure base address and length registers for the receive (event queue) |
| */ |
| static enum ice_status |
| ice_cfg_rq_regs(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| enum ice_status status; |
| |
| status = ice_cfg_cq_regs(hw, &cq->rq, cq->num_rq_entries); |
| if (status) |
| return status; |
| |
| /* Update tail in the HW to post pre-allocated buffers */ |
| wr32(hw, cq->rq.tail, (u32)(cq->num_rq_entries - 1)); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_init_sq - main initialization routine for Control ATQ |
| * @hw: pointer to the hardware structure |
| * @cq: pointer to the specific Control queue |
| * |
| * This is the main initialization routine for the Control Send Queue |
| * Prior to calling this function, the driver *MUST* set the following fields |
| * in the cq->structure: |
| * - cq->num_sq_entries |
| * - cq->sq_buf_size |
| * |
| * Do *NOT* hold the lock when calling this as the memory allocation routines |
| * called are not going to be atomic context safe |
| */ |
| static enum ice_status ice_init_sq(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| enum ice_status ret_code; |
| |
| if (cq->sq.count > 0) { |
| /* queue already initialized */ |
| ret_code = ICE_ERR_NOT_READY; |
| goto init_ctrlq_exit; |
| } |
| |
| /* verify input for valid configuration */ |
| if (!cq->num_sq_entries || !cq->sq_buf_size) { |
| ret_code = ICE_ERR_CFG; |
| goto init_ctrlq_exit; |
| } |
| |
| cq->sq.next_to_use = 0; |
| cq->sq.next_to_clean = 0; |
| |
| /* allocate the ring memory */ |
| ret_code = ice_alloc_ctrlq_sq_ring(hw, cq); |
| if (ret_code) |
| goto init_ctrlq_exit; |
| |
| /* allocate buffers in the rings */ |
| ret_code = ice_alloc_sq_bufs(hw, cq); |
| if (ret_code) |
| goto init_ctrlq_free_rings; |
| |
| /* initialize base registers */ |
| ret_code = ice_cfg_sq_regs(hw, cq); |
| if (ret_code) |
| goto init_ctrlq_free_rings; |
| |
| /* success! */ |
| cq->sq.count = cq->num_sq_entries; |
| goto init_ctrlq_exit; |
| |
| init_ctrlq_free_rings: |
| ice_free_cq_ring(hw, &cq->sq); |
| |
| init_ctrlq_exit: |
| return ret_code; |
| } |
| |
| /** |
| * ice_init_rq - initialize ARQ |
| * @hw: pointer to the hardware structure |
| * @cq: pointer to the specific Control queue |
| * |
| * The main initialization routine for the Admin Receive (Event) Queue. |
| * Prior to calling this function, the driver *MUST* set the following fields |
| * in the cq->structure: |
| * - cq->num_rq_entries |
| * - cq->rq_buf_size |
| * |
| * Do *NOT* hold the lock when calling this as the memory allocation routines |
| * called are not going to be atomic context safe |
| */ |
| static enum ice_status ice_init_rq(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| enum ice_status ret_code; |
| |
| if (cq->rq.count > 0) { |
| /* queue already initialized */ |
| ret_code = ICE_ERR_NOT_READY; |
| goto init_ctrlq_exit; |
| } |
| |
| /* verify input for valid configuration */ |
| if (!cq->num_rq_entries || !cq->rq_buf_size) { |
| ret_code = ICE_ERR_CFG; |
| goto init_ctrlq_exit; |
| } |
| |
| cq->rq.next_to_use = 0; |
| cq->rq.next_to_clean = 0; |
| |
| /* allocate the ring memory */ |
| ret_code = ice_alloc_ctrlq_rq_ring(hw, cq); |
| if (ret_code) |
| goto init_ctrlq_exit; |
| |
| /* allocate buffers in the rings */ |
| ret_code = ice_alloc_rq_bufs(hw, cq); |
| if (ret_code) |
| goto init_ctrlq_free_rings; |
| |
| /* initialize base registers */ |
| ret_code = ice_cfg_rq_regs(hw, cq); |
| if (ret_code) |
| goto init_ctrlq_free_rings; |
| |
| /* success! */ |
| cq->rq.count = cq->num_rq_entries; |
| goto init_ctrlq_exit; |
| |
| init_ctrlq_free_rings: |
| ice_free_cq_ring(hw, &cq->rq); |
| |
| init_ctrlq_exit: |
| return ret_code; |
| } |
| |
| #define ICE_FREE_CQ_BUFS(hw, qi, ring) \ |
| do { \ |
| int i; \ |
| /* free descriptors */ \ |
| for (i = 0; i < (qi)->num_##ring##_entries; i++) \ |
| if ((qi)->ring.r.ring##_bi[i].pa) { \ |
| dmam_free_coherent(ice_hw_to_dev(hw), \ |
| (qi)->ring.r.ring##_bi[i].size,\ |
| (qi)->ring.r.ring##_bi[i].va,\ |
| (qi)->ring.r.ring##_bi[i].pa);\ |
| (qi)->ring.r.ring##_bi[i].va = NULL; \ |
| (qi)->ring.r.ring##_bi[i].pa = 0; \ |
| (qi)->ring.r.ring##_bi[i].size = 0; \ |
| } \ |
| /* free the buffer info list */ \ |
| if ((qi)->ring.cmd_buf) \ |
| devm_kfree(ice_hw_to_dev(hw), (qi)->ring.cmd_buf); \ |
| /* free DMA head */ \ |
| devm_kfree(ice_hw_to_dev(hw), (qi)->ring.dma_head); \ |
| } while (0) |
| |
| /** |
| * ice_shutdown_sq - shutdown the Control ATQ |
| * @hw: pointer to the hardware structure |
| * @cq: pointer to the specific Control queue |
| * |
| * The main shutdown routine for the Control Transmit Queue |
| */ |
| static enum ice_status |
| ice_shutdown_sq(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| enum ice_status ret_code = 0; |
| |
| mutex_lock(&cq->sq_lock); |
| |
| if (!cq->sq.count) { |
| ret_code = ICE_ERR_NOT_READY; |
| goto shutdown_sq_out; |
| } |
| |
| /* Stop firmware AdminQ processing */ |
| wr32(hw, cq->sq.head, 0); |
| wr32(hw, cq->sq.tail, 0); |
| wr32(hw, cq->sq.len, 0); |
| wr32(hw, cq->sq.bal, 0); |
| wr32(hw, cq->sq.bah, 0); |
| |
| cq->sq.count = 0; /* to indicate uninitialized queue */ |
| |
| /* free ring buffers and the ring itself */ |
| ICE_FREE_CQ_BUFS(hw, cq, sq); |
| ice_free_cq_ring(hw, &cq->sq); |
| |
| shutdown_sq_out: |
| mutex_unlock(&cq->sq_lock); |
| return ret_code; |
| } |
| |
| /** |
| * ice_aq_ver_check - Check the reported AQ API version. |
| * @hw: pointer to the hardware structure |
| * |
| * Checks if the driver should load on a given AQ API version. |
| * |
| * Return: 'true' iff the driver should attempt to load. 'false' otherwise. |
| */ |
| static bool ice_aq_ver_check(struct ice_hw *hw) |
| { |
| if (hw->api_maj_ver > EXP_FW_API_VER_MAJOR) { |
| /* Major API version is newer than expected, don't load */ |
| dev_warn(ice_hw_to_dev(hw), |
| "The driver for the device stopped because the NVM image is newer than expected. You must install the most recent version of the network driver.\n"); |
| return false; |
| } else if (hw->api_maj_ver == EXP_FW_API_VER_MAJOR) { |
| if (hw->api_min_ver > (EXP_FW_API_VER_MINOR + 2)) |
| dev_info(ice_hw_to_dev(hw), |
| "The driver for the device detected a newer version of the NVM image than expected. Please install the most recent version of the network driver.\n"); |
| else if ((hw->api_min_ver + 2) < EXP_FW_API_VER_MINOR) |
| dev_info(ice_hw_to_dev(hw), |
| "The driver for the device detected an older version of the NVM image than expected. Please update the NVM image.\n"); |
| } else { |
| /* Major API version is older than expected, log a warning */ |
| dev_info(ice_hw_to_dev(hw), |
| "The driver for the device detected an older version of the NVM image than expected. Please update the NVM image.\n"); |
| } |
| return true; |
| } |
| |
| /** |
| * ice_shutdown_rq - shutdown Control ARQ |
| * @hw: pointer to the hardware structure |
| * @cq: pointer to the specific Control queue |
| * |
| * The main shutdown routine for the Control Receive Queue |
| */ |
| static enum ice_status |
| ice_shutdown_rq(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| enum ice_status ret_code = 0; |
| |
| mutex_lock(&cq->rq_lock); |
| |
| if (!cq->rq.count) { |
| ret_code = ICE_ERR_NOT_READY; |
| goto shutdown_rq_out; |
| } |
| |
| /* Stop Control Queue processing */ |
| wr32(hw, cq->rq.head, 0); |
| wr32(hw, cq->rq.tail, 0); |
| wr32(hw, cq->rq.len, 0); |
| wr32(hw, cq->rq.bal, 0); |
| wr32(hw, cq->rq.bah, 0); |
| |
| /* set rq.count to 0 to indicate uninitialized queue */ |
| cq->rq.count = 0; |
| |
| /* free ring buffers and the ring itself */ |
| ICE_FREE_CQ_BUFS(hw, cq, rq); |
| ice_free_cq_ring(hw, &cq->rq); |
| |
| shutdown_rq_out: |
| mutex_unlock(&cq->rq_lock); |
| return ret_code; |
| } |
| |
| /** |
| * ice_init_check_adminq - Check version for Admin Queue to know if its alive |
| * @hw: pointer to the hardware structure |
| */ |
| static enum ice_status ice_init_check_adminq(struct ice_hw *hw) |
| { |
| struct ice_ctl_q_info *cq = &hw->adminq; |
| enum ice_status status; |
| |
| status = ice_aq_get_fw_ver(hw, NULL); |
| if (status) |
| goto init_ctrlq_free_rq; |
| |
| if (!ice_aq_ver_check(hw)) { |
| status = ICE_ERR_FW_API_VER; |
| goto init_ctrlq_free_rq; |
| } |
| |
| return 0; |
| |
| init_ctrlq_free_rq: |
| ice_shutdown_rq(hw, cq); |
| ice_shutdown_sq(hw, cq); |
| return status; |
| } |
| |
| /** |
| * ice_init_ctrlq - main initialization routine for any control Queue |
| * @hw: pointer to the hardware structure |
| * @q_type: specific Control queue type |
| * |
| * Prior to calling this function, the driver *MUST* set the following fields |
| * in the cq->structure: |
| * - cq->num_sq_entries |
| * - cq->num_rq_entries |
| * - cq->rq_buf_size |
| * - cq->sq_buf_size |
| * |
| * NOTE: this function does not initialize the controlq locks |
| */ |
| static enum ice_status ice_init_ctrlq(struct ice_hw *hw, enum ice_ctl_q q_type) |
| { |
| struct ice_ctl_q_info *cq; |
| enum ice_status ret_code; |
| |
| switch (q_type) { |
| case ICE_CTL_Q_ADMIN: |
| ice_adminq_init_regs(hw); |
| cq = &hw->adminq; |
| break; |
| case ICE_CTL_Q_MAILBOX: |
| ice_mailbox_init_regs(hw); |
| cq = &hw->mailboxq; |
| break; |
| default: |
| return ICE_ERR_PARAM; |
| } |
| cq->qtype = q_type; |
| |
| /* verify input for valid configuration */ |
| if (!cq->num_rq_entries || !cq->num_sq_entries || |
| !cq->rq_buf_size || !cq->sq_buf_size) { |
| return ICE_ERR_CFG; |
| } |
| |
| /* setup SQ command write back timeout */ |
| cq->sq_cmd_timeout = ICE_CTL_Q_SQ_CMD_TIMEOUT; |
| |
| /* allocate the ATQ */ |
| ret_code = ice_init_sq(hw, cq); |
| if (ret_code) |
| return ret_code; |
| |
| /* allocate the ARQ */ |
| ret_code = ice_init_rq(hw, cq); |
| if (ret_code) |
| goto init_ctrlq_free_sq; |
| |
| /* success! */ |
| return 0; |
| |
| init_ctrlq_free_sq: |
| ice_shutdown_sq(hw, cq); |
| return ret_code; |
| } |
| |
| /** |
| * ice_init_all_ctrlq - main initialization routine for all control queues |
| * @hw: pointer to the hardware structure |
| * |
| * Prior to calling this function, the driver MUST* set the following fields |
| * in the cq->structure for all control queues: |
| * - cq->num_sq_entries |
| * - cq->num_rq_entries |
| * - cq->rq_buf_size |
| * - cq->sq_buf_size |
| * |
| * NOTE: this function does not initialize the controlq locks. |
| */ |
| enum ice_status ice_init_all_ctrlq(struct ice_hw *hw) |
| { |
| enum ice_status ret_code; |
| |
| /* Init FW admin queue */ |
| ret_code = ice_init_ctrlq(hw, ICE_CTL_Q_ADMIN); |
| if (ret_code) |
| return ret_code; |
| |
| ret_code = ice_init_check_adminq(hw); |
| if (ret_code) |
| return ret_code; |
| |
| /* Init Mailbox queue */ |
| return ice_init_ctrlq(hw, ICE_CTL_Q_MAILBOX); |
| } |
| |
| /** |
| * ice_init_ctrlq_locks - Initialize locks for a control queue |
| * @cq: pointer to the control queue |
| * |
| * Initializes the send and receive queue locks for a given control queue. |
| */ |
| static void ice_init_ctrlq_locks(struct ice_ctl_q_info *cq) |
| { |
| mutex_init(&cq->sq_lock); |
| mutex_init(&cq->rq_lock); |
| } |
| |
| /** |
| * ice_create_all_ctrlq - main initialization routine for all control queues |
| * @hw: pointer to the hardware structure |
| * |
| * Prior to calling this function, the driver *MUST* set the following fields |
| * in the cq->structure for all control queues: |
| * - cq->num_sq_entries |
| * - cq->num_rq_entries |
| * - cq->rq_buf_size |
| * - cq->sq_buf_size |
| * |
| * This function creates all the control queue locks and then calls |
| * ice_init_all_ctrlq. It should be called once during driver load. If the |
| * driver needs to re-initialize control queues at run time it should call |
| * ice_init_all_ctrlq instead. |
| */ |
| enum ice_status ice_create_all_ctrlq(struct ice_hw *hw) |
| { |
| ice_init_ctrlq_locks(&hw->adminq); |
| ice_init_ctrlq_locks(&hw->mailboxq); |
| |
| return ice_init_all_ctrlq(hw); |
| } |
| |
| /** |
| * ice_shutdown_ctrlq - shutdown routine for any control queue |
| * @hw: pointer to the hardware structure |
| * @q_type: specific Control queue type |
| * |
| * NOTE: this function does not destroy the control queue locks. |
| */ |
| static void ice_shutdown_ctrlq(struct ice_hw *hw, enum ice_ctl_q q_type) |
| { |
| struct ice_ctl_q_info *cq; |
| |
| switch (q_type) { |
| case ICE_CTL_Q_ADMIN: |
| cq = &hw->adminq; |
| if (ice_check_sq_alive(hw, cq)) |
| ice_aq_q_shutdown(hw, true); |
| break; |
| case ICE_CTL_Q_MAILBOX: |
| cq = &hw->mailboxq; |
| break; |
| default: |
| return; |
| } |
| |
| ice_shutdown_sq(hw, cq); |
| ice_shutdown_rq(hw, cq); |
| } |
| |
| /** |
| * ice_shutdown_all_ctrlq - shutdown routine for all control queues |
| * @hw: pointer to the hardware structure |
| * |
| * NOTE: this function does not destroy the control queue locks. The driver |
| * may call this at runtime to shutdown and later restart control queues, such |
| * as in response to a reset event. |
| */ |
| void ice_shutdown_all_ctrlq(struct ice_hw *hw) |
| { |
| /* Shutdown FW admin queue */ |
| ice_shutdown_ctrlq(hw, ICE_CTL_Q_ADMIN); |
| /* Shutdown PF-VF Mailbox */ |
| ice_shutdown_ctrlq(hw, ICE_CTL_Q_MAILBOX); |
| } |
| |
| /** |
| * ice_destroy_ctrlq_locks - Destroy locks for a control queue |
| * @cq: pointer to the control queue |
| * |
| * Destroys the send and receive queue locks for a given control queue. |
| */ |
| static void |
| ice_destroy_ctrlq_locks(struct ice_ctl_q_info *cq) |
| { |
| mutex_destroy(&cq->sq_lock); |
| mutex_destroy(&cq->rq_lock); |
| } |
| |
| /** |
| * ice_destroy_all_ctrlq - exit routine for all control queues |
| * @hw: pointer to the hardware structure |
| * |
| * This function shuts down all the control queues and then destroys the |
| * control queue locks. It should be called once during driver unload. The |
| * driver should call ice_shutdown_all_ctrlq if it needs to shut down and |
| * reinitialize control queues, such as in response to a reset event. |
| */ |
| void ice_destroy_all_ctrlq(struct ice_hw *hw) |
| { |
| /* shut down all the control queues first */ |
| ice_shutdown_all_ctrlq(hw); |
| |
| ice_destroy_ctrlq_locks(&hw->adminq); |
| ice_destroy_ctrlq_locks(&hw->mailboxq); |
| } |
| |
| /** |
| * ice_clean_sq - cleans Admin send queue (ATQ) |
| * @hw: pointer to the hardware structure |
| * @cq: pointer to the specific Control queue |
| * |
| * returns the number of free desc |
| */ |
| static u16 ice_clean_sq(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| struct ice_ctl_q_ring *sq = &cq->sq; |
| u16 ntc = sq->next_to_clean; |
| struct ice_sq_cd *details; |
| struct ice_aq_desc *desc; |
| |
| desc = ICE_CTL_Q_DESC(*sq, ntc); |
| details = ICE_CTL_Q_DETAILS(*sq, ntc); |
| |
| while (rd32(hw, cq->sq.head) != ntc) { |
| ice_debug(hw, ICE_DBG_AQ_MSG, |
| "ntc %d head %d.\n", ntc, rd32(hw, cq->sq.head)); |
| memset(desc, 0, sizeof(*desc)); |
| memset(details, 0, sizeof(*details)); |
| ntc++; |
| if (ntc == sq->count) |
| ntc = 0; |
| desc = ICE_CTL_Q_DESC(*sq, ntc); |
| details = ICE_CTL_Q_DETAILS(*sq, ntc); |
| } |
| |
| sq->next_to_clean = ntc; |
| |
| return ICE_CTL_Q_DESC_UNUSED(sq); |
| } |
| |
| /** |
| * ice_debug_cq |
| * @hw: pointer to the hardware structure |
| * @desc: pointer to control queue descriptor |
| * @buf: pointer to command buffer |
| * @buf_len: max length of buf |
| * |
| * Dumps debug log about control command with descriptor contents. |
| */ |
| static void ice_debug_cq(struct ice_hw *hw, void *desc, void *buf, u16 buf_len) |
| { |
| struct ice_aq_desc *cq_desc = (struct ice_aq_desc *)desc; |
| u16 len; |
| |
| if (!IS_ENABLED(CONFIG_DYNAMIC_DEBUG) && |
| !((ICE_DBG_AQ_DESC | ICE_DBG_AQ_DESC_BUF) & hw->debug_mask)) |
| return; |
| |
| if (!desc) |
| return; |
| |
| len = le16_to_cpu(cq_desc->datalen); |
| |
| ice_debug(hw, ICE_DBG_AQ_DESC, |
| "CQ CMD: opcode 0x%04X, flags 0x%04X, datalen 0x%04X, retval 0x%04X\n", |
| le16_to_cpu(cq_desc->opcode), |
| le16_to_cpu(cq_desc->flags), |
| le16_to_cpu(cq_desc->datalen), le16_to_cpu(cq_desc->retval)); |
| ice_debug(hw, ICE_DBG_AQ_DESC, "\tcookie (h,l) 0x%08X 0x%08X\n", |
| le32_to_cpu(cq_desc->cookie_high), |
| le32_to_cpu(cq_desc->cookie_low)); |
| ice_debug(hw, ICE_DBG_AQ_DESC, "\tparam (0,1) 0x%08X 0x%08X\n", |
| le32_to_cpu(cq_desc->params.generic.param0), |
| le32_to_cpu(cq_desc->params.generic.param1)); |
| ice_debug(hw, ICE_DBG_AQ_DESC, "\taddr (h,l) 0x%08X 0x%08X\n", |
| le32_to_cpu(cq_desc->params.generic.addr_high), |
| le32_to_cpu(cq_desc->params.generic.addr_low)); |
| if (buf && cq_desc->datalen != 0) { |
| ice_debug(hw, ICE_DBG_AQ_DESC_BUF, "Buffer:\n"); |
| if (buf_len < len) |
| len = buf_len; |
| |
| ice_debug_array(hw, ICE_DBG_AQ_DESC_BUF, 16, 1, (u8 *)buf, len); |
| } |
| } |
| |
| /** |
| * ice_sq_done - check if FW has processed the Admin Send Queue (ATQ) |
| * @hw: pointer to the HW struct |
| * @cq: pointer to the specific Control queue |
| * |
| * Returns true if the firmware has processed all descriptors on the |
| * admin send queue. Returns false if there are still requests pending. |
| */ |
| static bool ice_sq_done(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| /* AQ designers suggest use of head for better |
| * timing reliability than DD bit |
| */ |
| return rd32(hw, cq->sq.head) == cq->sq.next_to_use; |
| } |
| |
| /** |
| * ice_sq_send_cmd - send command to Control Queue (ATQ) |
| * @hw: pointer to the HW struct |
| * @cq: pointer to the specific Control queue |
| * @desc: prefilled descriptor describing the command (non DMA mem) |
| * @buf: buffer to use for indirect commands (or NULL for direct commands) |
| * @buf_size: size of buffer for indirect commands (or 0 for direct commands) |
| * @cd: pointer to command details structure |
| * |
| * This is the main send command routine for the ATQ. It runs the queue, |
| * cleans the queue, etc. |
| */ |
| enum ice_status |
| ice_sq_send_cmd(struct ice_hw *hw, struct ice_ctl_q_info *cq, |
| struct ice_aq_desc *desc, void *buf, u16 buf_size, |
| struct ice_sq_cd *cd) |
| { |
| struct ice_dma_mem *dma_buf = NULL; |
| struct ice_aq_desc *desc_on_ring; |
| bool cmd_completed = false; |
| enum ice_status status = 0; |
| struct ice_sq_cd *details; |
| u32 total_delay = 0; |
| u16 retval = 0; |
| u32 val = 0; |
| |
| /* if reset is in progress return a soft error */ |
| if (hw->reset_ongoing) |
| return ICE_ERR_RESET_ONGOING; |
| mutex_lock(&cq->sq_lock); |
| |
| cq->sq_last_status = ICE_AQ_RC_OK; |
| |
| if (!cq->sq.count) { |
| ice_debug(hw, ICE_DBG_AQ_MSG, |
| "Control Send queue not initialized.\n"); |
| status = ICE_ERR_AQ_EMPTY; |
| goto sq_send_command_error; |
| } |
| |
| if ((buf && !buf_size) || (!buf && buf_size)) { |
| status = ICE_ERR_PARAM; |
| goto sq_send_command_error; |
| } |
| |
| if (buf) { |
| if (buf_size > cq->sq_buf_size) { |
| ice_debug(hw, ICE_DBG_AQ_MSG, |
| "Invalid buffer size for Control Send queue: %d.\n", |
| buf_size); |
| status = ICE_ERR_INVAL_SIZE; |
| goto sq_send_command_error; |
| } |
| |
| desc->flags |= cpu_to_le16(ICE_AQ_FLAG_BUF); |
| if (buf_size > ICE_AQ_LG_BUF) |
| desc->flags |= cpu_to_le16(ICE_AQ_FLAG_LB); |
| } |
| |
| val = rd32(hw, cq->sq.head); |
| if (val >= cq->num_sq_entries) { |
| ice_debug(hw, ICE_DBG_AQ_MSG, |
| "head overrun at %d in the Control Send Queue ring\n", |
| val); |
| status = ICE_ERR_AQ_EMPTY; |
| goto sq_send_command_error; |
| } |
| |
| details = ICE_CTL_Q_DETAILS(cq->sq, cq->sq.next_to_use); |
| if (cd) |
| *details = *cd; |
| else |
| memset(details, 0, sizeof(*details)); |
| |
| /* Call clean and check queue available function to reclaim the |
| * descriptors that were processed by FW/MBX; the function returns the |
| * number of desc available. The clean function called here could be |
| * called in a separate thread in case of asynchronous completions. |
| */ |
| if (ice_clean_sq(hw, cq) == 0) { |
| ice_debug(hw, ICE_DBG_AQ_MSG, |
| "Error: Control Send Queue is full.\n"); |
| status = ICE_ERR_AQ_FULL; |
| goto sq_send_command_error; |
| } |
| |
| /* initialize the temp desc pointer with the right desc */ |
| desc_on_ring = ICE_CTL_Q_DESC(cq->sq, cq->sq.next_to_use); |
| |
| /* if the desc is available copy the temp desc to the right place */ |
| memcpy(desc_on_ring, desc, sizeof(*desc_on_ring)); |
| |
| /* if buf is not NULL assume indirect command */ |
| if (buf) { |
| dma_buf = &cq->sq.r.sq_bi[cq->sq.next_to_use]; |
| /* copy the user buf into the respective DMA buf */ |
| memcpy(dma_buf->va, buf, buf_size); |
| desc_on_ring->datalen = cpu_to_le16(buf_size); |
| |
| /* Update the address values in the desc with the pa value |
| * for respective buffer |
| */ |
| desc_on_ring->params.generic.addr_high = |
| cpu_to_le32(upper_32_bits(dma_buf->pa)); |
| desc_on_ring->params.generic.addr_low = |
| cpu_to_le32(lower_32_bits(dma_buf->pa)); |
| } |
| |
| /* Debug desc and buffer */ |
| ice_debug(hw, ICE_DBG_AQ_DESC, |
| "ATQ: Control Send queue desc and buffer:\n"); |
| |
| ice_debug_cq(hw, (void *)desc_on_ring, buf, buf_size); |
| |
| (cq->sq.next_to_use)++; |
| if (cq->sq.next_to_use == cq->sq.count) |
| cq->sq.next_to_use = 0; |
| wr32(hw, cq->sq.tail, cq->sq.next_to_use); |
| |
| do { |
| if (ice_sq_done(hw, cq)) |
| break; |
| |
| udelay(ICE_CTL_Q_SQ_CMD_USEC); |
| total_delay++; |
| } while (total_delay < cq->sq_cmd_timeout); |
| |
| /* if ready, copy the desc back to temp */ |
| if (ice_sq_done(hw, cq)) { |
| memcpy(desc, desc_on_ring, sizeof(*desc)); |
| if (buf) { |
| /* get returned length to copy */ |
| u16 copy_size = le16_to_cpu(desc->datalen); |
| |
| if (copy_size > buf_size) { |
| ice_debug(hw, ICE_DBG_AQ_MSG, |
| "Return len %d > than buf len %d\n", |
| copy_size, buf_size); |
| status = ICE_ERR_AQ_ERROR; |
| } else { |
| memcpy(buf, dma_buf->va, copy_size); |
| } |
| } |
| retval = le16_to_cpu(desc->retval); |
| if (retval) { |
| ice_debug(hw, ICE_DBG_AQ_MSG, |
| "Control Send Queue command 0x%04X completed with error 0x%X\n", |
| le16_to_cpu(desc->opcode), |
| retval); |
| |
| /* strip off FW internal code */ |
| retval &= 0xff; |
| } |
| cmd_completed = true; |
| if (!status && retval != ICE_AQ_RC_OK) |
| status = ICE_ERR_AQ_ERROR; |
| cq->sq_last_status = (enum ice_aq_err)retval; |
| } |
| |
| ice_debug(hw, ICE_DBG_AQ_MSG, |
| "ATQ: desc and buffer writeback:\n"); |
| |
| ice_debug_cq(hw, (void *)desc, buf, buf_size); |
| |
| /* save writeback AQ if requested */ |
| if (details->wb_desc) |
| memcpy(details->wb_desc, desc_on_ring, |
| sizeof(*details->wb_desc)); |
| |
| /* update the error if time out occurred */ |
| if (!cmd_completed) { |
| ice_debug(hw, ICE_DBG_AQ_MSG, |
| "Control Send Queue Writeback timeout.\n"); |
| status = ICE_ERR_AQ_TIMEOUT; |
| } |
| |
| sq_send_command_error: |
| mutex_unlock(&cq->sq_lock); |
| return status; |
| } |
| |
| /** |
| * ice_fill_dflt_direct_cmd_desc - AQ descriptor helper function |
| * @desc: pointer to the temp descriptor (non DMA mem) |
| * @opcode: the opcode can be used to decide which flags to turn off or on |
| * |
| * Fill the desc with default values |
| */ |
| void ice_fill_dflt_direct_cmd_desc(struct ice_aq_desc *desc, u16 opcode) |
| { |
| /* zero out the desc */ |
| memset(desc, 0, sizeof(*desc)); |
| desc->opcode = cpu_to_le16(opcode); |
| desc->flags = cpu_to_le16(ICE_AQ_FLAG_SI); |
| } |
| |
| /** |
| * ice_clean_rq_elem |
| * @hw: pointer to the HW struct |
| * @cq: pointer to the specific Control queue |
| * @e: event info from the receive descriptor, includes any buffers |
| * @pending: number of events that could be left to process |
| * |
| * This function cleans one Admin Receive Queue element and returns |
| * the contents through e. It can also return how many events are |
| * left to process through 'pending'. |
| */ |
| enum ice_status |
| ice_clean_rq_elem(struct ice_hw *hw, struct ice_ctl_q_info *cq, |
| struct ice_rq_event_info *e, u16 *pending) |
| { |
| u16 ntc = cq->rq.next_to_clean; |
| enum ice_status ret_code = 0; |
| struct ice_aq_desc *desc; |
| struct ice_dma_mem *bi; |
| u16 desc_idx; |
| u16 datalen; |
| u16 flags; |
| u16 ntu; |
| |
| /* pre-clean the event info */ |
| memset(&e->desc, 0, sizeof(e->desc)); |
| |
| /* take the lock before we start messing with the ring */ |
| mutex_lock(&cq->rq_lock); |
| |
| if (!cq->rq.count) { |
| ice_debug(hw, ICE_DBG_AQ_MSG, |
| "Control Receive queue not initialized.\n"); |
| ret_code = ICE_ERR_AQ_EMPTY; |
| goto clean_rq_elem_err; |
| } |
| |
| /* set next_to_use to head */ |
| ntu = (u16)(rd32(hw, cq->rq.head) & cq->rq.head_mask); |
| |
| if (ntu == ntc) { |
| /* nothing to do - shouldn't need to update ring's values */ |
| ret_code = ICE_ERR_AQ_NO_WORK; |
| goto clean_rq_elem_out; |
| } |
| |
| /* now clean the next descriptor */ |
| desc = ICE_CTL_Q_DESC(cq->rq, ntc); |
| desc_idx = ntc; |
| |
| cq->rq_last_status = (enum ice_aq_err)le16_to_cpu(desc->retval); |
| flags = le16_to_cpu(desc->flags); |
| if (flags & ICE_AQ_FLAG_ERR) { |
| ret_code = ICE_ERR_AQ_ERROR; |
| ice_debug(hw, ICE_DBG_AQ_MSG, |
| "Control Receive Queue Event 0x%04X received with error 0x%X\n", |
| le16_to_cpu(desc->opcode), |
| cq->rq_last_status); |
| } |
| memcpy(&e->desc, desc, sizeof(e->desc)); |
| datalen = le16_to_cpu(desc->datalen); |
| e->msg_len = min(datalen, e->buf_len); |
| if (e->msg_buf && e->msg_len) |
| memcpy(e->msg_buf, cq->rq.r.rq_bi[desc_idx].va, e->msg_len); |
| |
| ice_debug(hw, ICE_DBG_AQ_DESC, "ARQ: desc and buffer:\n"); |
| |
| ice_debug_cq(hw, (void *)desc, e->msg_buf, cq->rq_buf_size); |
| |
| /* Restore the original datalen and buffer address in the desc, |
| * FW updates datalen to indicate the event message size |
| */ |
| bi = &cq->rq.r.rq_bi[ntc]; |
| memset(desc, 0, sizeof(*desc)); |
| |
| desc->flags = cpu_to_le16(ICE_AQ_FLAG_BUF); |
| if (cq->rq_buf_size > ICE_AQ_LG_BUF) |
| desc->flags |= cpu_to_le16(ICE_AQ_FLAG_LB); |
| desc->datalen = cpu_to_le16(bi->size); |
| desc->params.generic.addr_high = cpu_to_le32(upper_32_bits(bi->pa)); |
| desc->params.generic.addr_low = cpu_to_le32(lower_32_bits(bi->pa)); |
| |
| /* set tail = the last cleaned desc index. */ |
| wr32(hw, cq->rq.tail, ntc); |
| /* ntc is updated to tail + 1 */ |
| ntc++; |
| if (ntc == cq->num_rq_entries) |
| ntc = 0; |
| cq->rq.next_to_clean = ntc; |
| cq->rq.next_to_use = ntu; |
| |
| clean_rq_elem_out: |
| /* Set pending if needed, unlock and return */ |
| if (pending) { |
| /* re-read HW head to calculate actual pending messages */ |
| ntu = (u16)(rd32(hw, cq->rq.head) & cq->rq.head_mask); |
| *pending = (u16)((ntc > ntu ? cq->rq.count : 0) + (ntu - ntc)); |
| } |
| clean_rq_elem_err: |
| mutex_unlock(&cq->rq_lock); |
| |
| return ret_code; |
| } |