| // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 |
| /* Copyright (c) 2016-2018 Mellanox Technologies. All rights reserved |
| * Copyright (c) 2016 Ivan Vecera <cera@cera.cz> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/device.h> |
| #include <linux/sysfs.h> |
| #include <linux/thermal.h> |
| #include <linux/err.h> |
| #include <linux/sfp.h> |
| |
| #include "core.h" |
| #include "core_env.h" |
| |
| #define MLXSW_THERMAL_POLL_INT 1000 /* ms */ |
| #define MLXSW_THERMAL_SLOW_POLL_INT 20000 /* ms */ |
| #define MLXSW_THERMAL_ASIC_TEMP_NORM 75000 /* 75C */ |
| #define MLXSW_THERMAL_ASIC_TEMP_HIGH 85000 /* 85C */ |
| #define MLXSW_THERMAL_ASIC_TEMP_HOT 105000 /* 105C */ |
| #define MLXSW_THERMAL_ASIC_TEMP_CRIT 110000 /* 110C */ |
| #define MLXSW_THERMAL_HYSTERESIS_TEMP 5000 /* 5C */ |
| #define MLXSW_THERMAL_MODULE_TEMP_SHIFT (MLXSW_THERMAL_HYSTERESIS_TEMP * 2) |
| #define MLXSW_THERMAL_ZONE_MAX_NAME 16 |
| #define MLXSW_THERMAL_MAX_STATE 10 |
| #define MLXSW_THERMAL_MAX_DUTY 255 |
| /* Minimum and maximum fan allowed speed in percent: from 20% to 100%. Values |
| * MLXSW_THERMAL_MAX_STATE + x, where x is between 2 and 10 are used for |
| * setting fan speed dynamic minimum. For example, if value is set to 14 (40%) |
| * cooling levels vector will be set to 4, 4, 4, 4, 4, 5, 6, 7, 8, 9, 10 to |
| * introduce PWM speed in percent: 40, 40, 40, 40, 40, 50, 60. 70, 80, 90, 100. |
| */ |
| #define MLXSW_THERMAL_SPEED_MIN (MLXSW_THERMAL_MAX_STATE + 2) |
| #define MLXSW_THERMAL_SPEED_MAX (MLXSW_THERMAL_MAX_STATE * 2) |
| #define MLXSW_THERMAL_SPEED_MIN_LEVEL 2 /* 20% */ |
| |
| /* External cooling devices, allowed for binding to mlxsw thermal zones. */ |
| static char * const mlxsw_thermal_external_allowed_cdev[] = { |
| "mlxreg_fan", |
| }; |
| |
| enum mlxsw_thermal_trips { |
| MLXSW_THERMAL_TEMP_TRIP_NORM, |
| MLXSW_THERMAL_TEMP_TRIP_HIGH, |
| MLXSW_THERMAL_TEMP_TRIP_HOT, |
| MLXSW_THERMAL_TEMP_TRIP_CRIT, |
| }; |
| |
| struct mlxsw_thermal_trip { |
| int type; |
| int temp; |
| int hyst; |
| int min_state; |
| int max_state; |
| }; |
| |
| static const struct mlxsw_thermal_trip default_thermal_trips[] = { |
| { /* In range - 0-40% PWM */ |
| .type = THERMAL_TRIP_ACTIVE, |
| .temp = MLXSW_THERMAL_ASIC_TEMP_NORM, |
| .hyst = MLXSW_THERMAL_HYSTERESIS_TEMP, |
| .min_state = 0, |
| .max_state = (4 * MLXSW_THERMAL_MAX_STATE) / 10, |
| }, |
| { |
| /* In range - 40-100% PWM */ |
| .type = THERMAL_TRIP_ACTIVE, |
| .temp = MLXSW_THERMAL_ASIC_TEMP_HIGH, |
| .hyst = MLXSW_THERMAL_HYSTERESIS_TEMP, |
| .min_state = (4 * MLXSW_THERMAL_MAX_STATE) / 10, |
| .max_state = MLXSW_THERMAL_MAX_STATE, |
| }, |
| { /* Warning */ |
| .type = THERMAL_TRIP_HOT, |
| .temp = MLXSW_THERMAL_ASIC_TEMP_HOT, |
| .hyst = MLXSW_THERMAL_HYSTERESIS_TEMP, |
| .min_state = MLXSW_THERMAL_MAX_STATE, |
| .max_state = MLXSW_THERMAL_MAX_STATE, |
| }, |
| { /* Critical - soft poweroff */ |
| .type = THERMAL_TRIP_CRITICAL, |
| .temp = MLXSW_THERMAL_ASIC_TEMP_CRIT, |
| .min_state = MLXSW_THERMAL_MAX_STATE, |
| .max_state = MLXSW_THERMAL_MAX_STATE, |
| } |
| }; |
| |
| #define MLXSW_THERMAL_NUM_TRIPS ARRAY_SIZE(default_thermal_trips) |
| |
| /* Make sure all trips are writable */ |
| #define MLXSW_THERMAL_TRIP_MASK (BIT(MLXSW_THERMAL_NUM_TRIPS) - 1) |
| |
| struct mlxsw_thermal; |
| |
| struct mlxsw_thermal_module { |
| struct mlxsw_thermal *parent; |
| struct thermal_zone_device *tzdev; |
| struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS]; |
| enum thermal_device_mode mode; |
| int module; |
| }; |
| |
| struct mlxsw_thermal { |
| struct mlxsw_core *core; |
| const struct mlxsw_bus_info *bus_info; |
| struct thermal_zone_device *tzdev; |
| int polling_delay; |
| struct thermal_cooling_device *cdevs[MLXSW_MFCR_PWMS_MAX]; |
| u8 cooling_levels[MLXSW_THERMAL_MAX_STATE + 1]; |
| struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS]; |
| enum thermal_device_mode mode; |
| struct mlxsw_thermal_module *tz_module_arr; |
| }; |
| |
| static inline u8 mlxsw_state_to_duty(int state) |
| { |
| return DIV_ROUND_CLOSEST(state * MLXSW_THERMAL_MAX_DUTY, |
| MLXSW_THERMAL_MAX_STATE); |
| } |
| |
| static inline int mlxsw_duty_to_state(u8 duty) |
| { |
| return DIV_ROUND_CLOSEST(duty * MLXSW_THERMAL_MAX_STATE, |
| MLXSW_THERMAL_MAX_DUTY); |
| } |
| |
| static int mlxsw_get_cooling_device_idx(struct mlxsw_thermal *thermal, |
| struct thermal_cooling_device *cdev) |
| { |
| int i; |
| |
| for (i = 0; i < MLXSW_MFCR_PWMS_MAX; i++) |
| if (thermal->cdevs[i] == cdev) |
| return i; |
| |
| /* Allow mlxsw thermal zone binding to an external cooling device */ |
| for (i = 0; i < ARRAY_SIZE(mlxsw_thermal_external_allowed_cdev); i++) { |
| if (strnstr(cdev->type, mlxsw_thermal_external_allowed_cdev[i], |
| sizeof(cdev->type))) |
| return 0; |
| } |
| |
| return -ENODEV; |
| } |
| |
| static void |
| mlxsw_thermal_module_trips_reset(struct mlxsw_thermal_module *tz) |
| { |
| tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temp = 0; |
| tz->trips[MLXSW_THERMAL_TEMP_TRIP_HIGH].temp = 0; |
| tz->trips[MLXSW_THERMAL_TEMP_TRIP_HOT].temp = 0; |
| tz->trips[MLXSW_THERMAL_TEMP_TRIP_CRIT].temp = 0; |
| } |
| |
| static int |
| mlxsw_thermal_module_trips_update(struct device *dev, struct mlxsw_core *core, |
| struct mlxsw_thermal_module *tz) |
| { |
| int crit_temp, emerg_temp; |
| int err; |
| |
| err = mlxsw_env_module_temp_thresholds_get(core, tz->module, |
| SFP_TEMP_HIGH_WARN, |
| &crit_temp); |
| if (err) |
| return err; |
| |
| err = mlxsw_env_module_temp_thresholds_get(core, tz->module, |
| SFP_TEMP_HIGH_ALARM, |
| &emerg_temp); |
| if (err) |
| return err; |
| |
| /* According to the system thermal requirements, the thermal zones are |
| * defined with four trip points. The critical and emergency |
| * temperature thresholds, provided by QSFP module are set as "active" |
| * and "hot" trip points, "normal" and "critical" trip points are |
| * derived from "active" and "hot" by subtracting or adding double |
| * hysteresis value. |
| */ |
| if (crit_temp >= MLXSW_THERMAL_MODULE_TEMP_SHIFT) |
| tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temp = crit_temp - |
| MLXSW_THERMAL_MODULE_TEMP_SHIFT; |
| else |
| tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temp = crit_temp; |
| tz->trips[MLXSW_THERMAL_TEMP_TRIP_HIGH].temp = crit_temp; |
| tz->trips[MLXSW_THERMAL_TEMP_TRIP_HOT].temp = emerg_temp; |
| if (emerg_temp > crit_temp) |
| tz->trips[MLXSW_THERMAL_TEMP_TRIP_CRIT].temp = emerg_temp + |
| MLXSW_THERMAL_MODULE_TEMP_SHIFT; |
| else |
| tz->trips[MLXSW_THERMAL_TEMP_TRIP_CRIT].temp = emerg_temp; |
| |
| return 0; |
| } |
| |
| static int mlxsw_thermal_bind(struct thermal_zone_device *tzdev, |
| struct thermal_cooling_device *cdev) |
| { |
| struct mlxsw_thermal *thermal = tzdev->devdata; |
| struct device *dev = thermal->bus_info->dev; |
| int i, err; |
| |
| /* If the cooling device is one of ours bind it */ |
| if (mlxsw_get_cooling_device_idx(thermal, cdev) < 0) |
| return 0; |
| |
| for (i = 0; i < MLXSW_THERMAL_NUM_TRIPS; i++) { |
| const struct mlxsw_thermal_trip *trip = &thermal->trips[i]; |
| |
| err = thermal_zone_bind_cooling_device(tzdev, i, cdev, |
| trip->max_state, |
| trip->min_state, |
| THERMAL_WEIGHT_DEFAULT); |
| if (err < 0) { |
| dev_err(dev, "Failed to bind cooling device to trip %d\n", i); |
| return err; |
| } |
| } |
| return 0; |
| } |
| |
| static int mlxsw_thermal_unbind(struct thermal_zone_device *tzdev, |
| struct thermal_cooling_device *cdev) |
| { |
| struct mlxsw_thermal *thermal = tzdev->devdata; |
| struct device *dev = thermal->bus_info->dev; |
| int i; |
| int err; |
| |
| /* If the cooling device is our one unbind it */ |
| if (mlxsw_get_cooling_device_idx(thermal, cdev) < 0) |
| return 0; |
| |
| for (i = 0; i < MLXSW_THERMAL_NUM_TRIPS; i++) { |
| err = thermal_zone_unbind_cooling_device(tzdev, i, cdev); |
| if (err < 0) { |
| dev_err(dev, "Failed to unbind cooling device\n"); |
| return err; |
| } |
| } |
| return 0; |
| } |
| |
| static int mlxsw_thermal_get_mode(struct thermal_zone_device *tzdev, |
| enum thermal_device_mode *mode) |
| { |
| struct mlxsw_thermal *thermal = tzdev->devdata; |
| |
| *mode = thermal->mode; |
| |
| return 0; |
| } |
| |
| static int mlxsw_thermal_set_mode(struct thermal_zone_device *tzdev, |
| enum thermal_device_mode mode) |
| { |
| struct mlxsw_thermal *thermal = tzdev->devdata; |
| |
| mutex_lock(&tzdev->lock); |
| |
| if (mode == THERMAL_DEVICE_ENABLED) |
| tzdev->polling_delay = thermal->polling_delay; |
| else |
| tzdev->polling_delay = 0; |
| |
| mutex_unlock(&tzdev->lock); |
| |
| thermal->mode = mode; |
| thermal_zone_device_update(tzdev, THERMAL_EVENT_UNSPECIFIED); |
| |
| return 0; |
| } |
| |
| static int mlxsw_thermal_get_temp(struct thermal_zone_device *tzdev, |
| int *p_temp) |
| { |
| struct mlxsw_thermal *thermal = tzdev->devdata; |
| struct device *dev = thermal->bus_info->dev; |
| char mtmp_pl[MLXSW_REG_MTMP_LEN]; |
| unsigned int temp; |
| int err; |
| |
| mlxsw_reg_mtmp_pack(mtmp_pl, 0, false, false); |
| |
| err = mlxsw_reg_query(thermal->core, MLXSW_REG(mtmp), mtmp_pl); |
| if (err) { |
| dev_err(dev, "Failed to query temp sensor\n"); |
| return err; |
| } |
| mlxsw_reg_mtmp_unpack(mtmp_pl, &temp, NULL, NULL); |
| |
| *p_temp = (int) temp; |
| return 0; |
| } |
| |
| static int mlxsw_thermal_get_trip_type(struct thermal_zone_device *tzdev, |
| int trip, |
| enum thermal_trip_type *p_type) |
| { |
| struct mlxsw_thermal *thermal = tzdev->devdata; |
| |
| if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS) |
| return -EINVAL; |
| |
| *p_type = thermal->trips[trip].type; |
| return 0; |
| } |
| |
| static int mlxsw_thermal_get_trip_temp(struct thermal_zone_device *tzdev, |
| int trip, int *p_temp) |
| { |
| struct mlxsw_thermal *thermal = tzdev->devdata; |
| |
| if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS) |
| return -EINVAL; |
| |
| *p_temp = thermal->trips[trip].temp; |
| return 0; |
| } |
| |
| static int mlxsw_thermal_set_trip_temp(struct thermal_zone_device *tzdev, |
| int trip, int temp) |
| { |
| struct mlxsw_thermal *thermal = tzdev->devdata; |
| |
| if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS || |
| temp > MLXSW_THERMAL_ASIC_TEMP_CRIT) |
| return -EINVAL; |
| |
| thermal->trips[trip].temp = temp; |
| return 0; |
| } |
| |
| static int mlxsw_thermal_get_trip_hyst(struct thermal_zone_device *tzdev, |
| int trip, int *p_hyst) |
| { |
| struct mlxsw_thermal *thermal = tzdev->devdata; |
| |
| *p_hyst = thermal->trips[trip].hyst; |
| return 0; |
| } |
| |
| static int mlxsw_thermal_set_trip_hyst(struct thermal_zone_device *tzdev, |
| int trip, int hyst) |
| { |
| struct mlxsw_thermal *thermal = tzdev->devdata; |
| |
| thermal->trips[trip].hyst = hyst; |
| return 0; |
| } |
| |
| static struct thermal_zone_device_ops mlxsw_thermal_ops = { |
| .bind = mlxsw_thermal_bind, |
| .unbind = mlxsw_thermal_unbind, |
| .get_mode = mlxsw_thermal_get_mode, |
| .set_mode = mlxsw_thermal_set_mode, |
| .get_temp = mlxsw_thermal_get_temp, |
| .get_trip_type = mlxsw_thermal_get_trip_type, |
| .get_trip_temp = mlxsw_thermal_get_trip_temp, |
| .set_trip_temp = mlxsw_thermal_set_trip_temp, |
| .get_trip_hyst = mlxsw_thermal_get_trip_hyst, |
| .set_trip_hyst = mlxsw_thermal_set_trip_hyst, |
| }; |
| |
| static int mlxsw_thermal_module_bind(struct thermal_zone_device *tzdev, |
| struct thermal_cooling_device *cdev) |
| { |
| struct mlxsw_thermal_module *tz = tzdev->devdata; |
| struct mlxsw_thermal *thermal = tz->parent; |
| int i, j, err; |
| |
| /* If the cooling device is one of ours bind it */ |
| if (mlxsw_get_cooling_device_idx(thermal, cdev) < 0) |
| return 0; |
| |
| for (i = 0; i < MLXSW_THERMAL_NUM_TRIPS; i++) { |
| const struct mlxsw_thermal_trip *trip = &tz->trips[i]; |
| |
| err = thermal_zone_bind_cooling_device(tzdev, i, cdev, |
| trip->max_state, |
| trip->min_state, |
| THERMAL_WEIGHT_DEFAULT); |
| if (err < 0) |
| goto err_bind_cooling_device; |
| } |
| return 0; |
| |
| err_bind_cooling_device: |
| for (j = i - 1; j >= 0; j--) |
| thermal_zone_unbind_cooling_device(tzdev, j, cdev); |
| return err; |
| } |
| |
| static int mlxsw_thermal_module_unbind(struct thermal_zone_device *tzdev, |
| struct thermal_cooling_device *cdev) |
| { |
| struct mlxsw_thermal_module *tz = tzdev->devdata; |
| struct mlxsw_thermal *thermal = tz->parent; |
| int i; |
| int err; |
| |
| /* If the cooling device is one of ours unbind it */ |
| if (mlxsw_get_cooling_device_idx(thermal, cdev) < 0) |
| return 0; |
| |
| for (i = 0; i < MLXSW_THERMAL_NUM_TRIPS; i++) { |
| err = thermal_zone_unbind_cooling_device(tzdev, i, cdev); |
| WARN_ON(err); |
| } |
| return err; |
| } |
| |
| static int mlxsw_thermal_module_mode_get(struct thermal_zone_device *tzdev, |
| enum thermal_device_mode *mode) |
| { |
| struct mlxsw_thermal_module *tz = tzdev->devdata; |
| |
| *mode = tz->mode; |
| |
| return 0; |
| } |
| |
| static int mlxsw_thermal_module_mode_set(struct thermal_zone_device *tzdev, |
| enum thermal_device_mode mode) |
| { |
| struct mlxsw_thermal_module *tz = tzdev->devdata; |
| struct mlxsw_thermal *thermal = tz->parent; |
| |
| mutex_lock(&tzdev->lock); |
| |
| if (mode == THERMAL_DEVICE_ENABLED) |
| tzdev->polling_delay = thermal->polling_delay; |
| else |
| tzdev->polling_delay = 0; |
| |
| mutex_unlock(&tzdev->lock); |
| |
| tz->mode = mode; |
| thermal_zone_device_update(tzdev, THERMAL_EVENT_UNSPECIFIED); |
| |
| return 0; |
| } |
| |
| static int mlxsw_thermal_module_temp_get(struct thermal_zone_device *tzdev, |
| int *p_temp) |
| { |
| struct mlxsw_thermal_module *tz = tzdev->devdata; |
| struct mlxsw_thermal *thermal = tz->parent; |
| struct device *dev = thermal->bus_info->dev; |
| char mtbr_pl[MLXSW_REG_MTBR_LEN]; |
| u16 temp; |
| int err; |
| |
| /* Read module temperature. */ |
| mlxsw_reg_mtbr_pack(mtbr_pl, MLXSW_REG_MTBR_BASE_MODULE_INDEX + |
| tz->module, 1); |
| err = mlxsw_reg_query(thermal->core, MLXSW_REG(mtbr), mtbr_pl); |
| if (err) |
| return err; |
| |
| mlxsw_reg_mtbr_temp_unpack(mtbr_pl, 0, &temp, NULL); |
| /* Update temperature. */ |
| switch (temp) { |
| case MLXSW_REG_MTBR_NO_CONN: /* fall-through */ |
| case MLXSW_REG_MTBR_NO_TEMP_SENS: /* fall-through */ |
| case MLXSW_REG_MTBR_INDEX_NA: /* fall-through */ |
| case MLXSW_REG_MTBR_BAD_SENS_INFO: |
| temp = 0; |
| break; |
| default: |
| temp = MLXSW_REG_MTMP_TEMP_TO_MC(temp); |
| /* Reset all trip point. */ |
| mlxsw_thermal_module_trips_reset(tz); |
| /* Update trip points. */ |
| err = mlxsw_thermal_module_trips_update(dev, thermal->core, |
| tz); |
| if (err) |
| return err; |
| break; |
| } |
| |
| *p_temp = (int) temp; |
| return 0; |
| } |
| |
| static int |
| mlxsw_thermal_module_trip_type_get(struct thermal_zone_device *tzdev, int trip, |
| enum thermal_trip_type *p_type) |
| { |
| struct mlxsw_thermal_module *tz = tzdev->devdata; |
| |
| if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS) |
| return -EINVAL; |
| |
| *p_type = tz->trips[trip].type; |
| return 0; |
| } |
| |
| static int |
| mlxsw_thermal_module_trip_temp_get(struct thermal_zone_device *tzdev, |
| int trip, int *p_temp) |
| { |
| struct mlxsw_thermal_module *tz = tzdev->devdata; |
| |
| if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS) |
| return -EINVAL; |
| |
| *p_temp = tz->trips[trip].temp; |
| return 0; |
| } |
| |
| static int |
| mlxsw_thermal_module_trip_temp_set(struct thermal_zone_device *tzdev, |
| int trip, int temp) |
| { |
| struct mlxsw_thermal_module *tz = tzdev->devdata; |
| |
| if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS || |
| temp > tz->trips[MLXSW_THERMAL_TEMP_TRIP_CRIT].temp) |
| return -EINVAL; |
| |
| tz->trips[trip].temp = temp; |
| return 0; |
| } |
| |
| static int |
| mlxsw_thermal_module_trip_hyst_get(struct thermal_zone_device *tzdev, int trip, |
| int *p_hyst) |
| { |
| struct mlxsw_thermal_module *tz = tzdev->devdata; |
| |
| *p_hyst = tz->trips[trip].hyst; |
| return 0; |
| } |
| |
| static int |
| mlxsw_thermal_module_trip_hyst_set(struct thermal_zone_device *tzdev, int trip, |
| int hyst) |
| { |
| struct mlxsw_thermal_module *tz = tzdev->devdata; |
| |
| tz->trips[trip].hyst = hyst; |
| return 0; |
| } |
| |
| static struct thermal_zone_params mlxsw_thermal_module_params = { |
| .governor_name = "user_space", |
| }; |
| |
| static struct thermal_zone_device_ops mlxsw_thermal_module_ops = { |
| .bind = mlxsw_thermal_module_bind, |
| .unbind = mlxsw_thermal_module_unbind, |
| .get_mode = mlxsw_thermal_module_mode_get, |
| .set_mode = mlxsw_thermal_module_mode_set, |
| .get_temp = mlxsw_thermal_module_temp_get, |
| .get_trip_type = mlxsw_thermal_module_trip_type_get, |
| .get_trip_temp = mlxsw_thermal_module_trip_temp_get, |
| .set_trip_temp = mlxsw_thermal_module_trip_temp_set, |
| .get_trip_hyst = mlxsw_thermal_module_trip_hyst_get, |
| .set_trip_hyst = mlxsw_thermal_module_trip_hyst_set, |
| }; |
| |
| static int mlxsw_thermal_get_max_state(struct thermal_cooling_device *cdev, |
| unsigned long *p_state) |
| { |
| *p_state = MLXSW_THERMAL_MAX_STATE; |
| return 0; |
| } |
| |
| static int mlxsw_thermal_get_cur_state(struct thermal_cooling_device *cdev, |
| unsigned long *p_state) |
| |
| { |
| struct mlxsw_thermal *thermal = cdev->devdata; |
| struct device *dev = thermal->bus_info->dev; |
| char mfsc_pl[MLXSW_REG_MFSC_LEN]; |
| int err, idx; |
| u8 duty; |
| |
| idx = mlxsw_get_cooling_device_idx(thermal, cdev); |
| if (idx < 0) |
| return idx; |
| |
| mlxsw_reg_mfsc_pack(mfsc_pl, idx, 0); |
| err = mlxsw_reg_query(thermal->core, MLXSW_REG(mfsc), mfsc_pl); |
| if (err) { |
| dev_err(dev, "Failed to query PWM duty\n"); |
| return err; |
| } |
| |
| duty = mlxsw_reg_mfsc_pwm_duty_cycle_get(mfsc_pl); |
| *p_state = mlxsw_duty_to_state(duty); |
| return 0; |
| } |
| |
| static int mlxsw_thermal_set_cur_state(struct thermal_cooling_device *cdev, |
| unsigned long state) |
| |
| { |
| struct mlxsw_thermal *thermal = cdev->devdata; |
| struct device *dev = thermal->bus_info->dev; |
| char mfsc_pl[MLXSW_REG_MFSC_LEN]; |
| unsigned long cur_state, i; |
| int idx; |
| u8 duty; |
| int err; |
| |
| idx = mlxsw_get_cooling_device_idx(thermal, cdev); |
| if (idx < 0) |
| return idx; |
| |
| /* Verify if this request is for changing allowed fan dynamical |
| * minimum. If it is - update cooling levels accordingly and update |
| * state, if current state is below the newly requested minimum state. |
| * For example, if current state is 5, and minimal state is to be |
| * changed from 4 to 6, thermal->cooling_levels[0 to 5] will be changed |
| * all from 4 to 6. And state 5 (thermal->cooling_levels[4]) should be |
| * overwritten. |
| */ |
| if (state >= MLXSW_THERMAL_SPEED_MIN && |
| state <= MLXSW_THERMAL_SPEED_MAX) { |
| state -= MLXSW_THERMAL_MAX_STATE; |
| for (i = 0; i <= MLXSW_THERMAL_MAX_STATE; i++) |
| thermal->cooling_levels[i] = max(state, i); |
| |
| mlxsw_reg_mfsc_pack(mfsc_pl, idx, 0); |
| err = mlxsw_reg_query(thermal->core, MLXSW_REG(mfsc), mfsc_pl); |
| if (err) |
| return err; |
| |
| duty = mlxsw_reg_mfsc_pwm_duty_cycle_get(mfsc_pl); |
| cur_state = mlxsw_duty_to_state(duty); |
| |
| /* If current fan state is lower than requested dynamical |
| * minimum, increase fan speed up to dynamical minimum. |
| */ |
| if (state < cur_state) |
| return 0; |
| |
| state = cur_state; |
| } |
| |
| if (state > MLXSW_THERMAL_MAX_STATE) |
| return -EINVAL; |
| |
| /* Normalize the state to the valid speed range. */ |
| state = thermal->cooling_levels[state]; |
| mlxsw_reg_mfsc_pack(mfsc_pl, idx, mlxsw_state_to_duty(state)); |
| err = mlxsw_reg_write(thermal->core, MLXSW_REG(mfsc), mfsc_pl); |
| if (err) { |
| dev_err(dev, "Failed to write PWM duty\n"); |
| return err; |
| } |
| return 0; |
| } |
| |
| static const struct thermal_cooling_device_ops mlxsw_cooling_ops = { |
| .get_max_state = mlxsw_thermal_get_max_state, |
| .get_cur_state = mlxsw_thermal_get_cur_state, |
| .set_cur_state = mlxsw_thermal_set_cur_state, |
| }; |
| |
| static int |
| mlxsw_thermal_module_tz_init(struct mlxsw_thermal_module *module_tz) |
| { |
| char tz_name[MLXSW_THERMAL_ZONE_MAX_NAME]; |
| int err; |
| |
| snprintf(tz_name, sizeof(tz_name), "mlxsw-module%d", |
| module_tz->module + 1); |
| module_tz->tzdev = thermal_zone_device_register(tz_name, |
| MLXSW_THERMAL_NUM_TRIPS, |
| MLXSW_THERMAL_TRIP_MASK, |
| module_tz, |
| &mlxsw_thermal_module_ops, |
| &mlxsw_thermal_module_params, |
| 0, 0); |
| if (IS_ERR(module_tz->tzdev)) { |
| err = PTR_ERR(module_tz->tzdev); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static void mlxsw_thermal_module_tz_fini(struct thermal_zone_device *tzdev) |
| { |
| thermal_zone_device_unregister(tzdev); |
| } |
| |
| static int |
| mlxsw_thermal_module_init(struct device *dev, struct mlxsw_core *core, |
| struct mlxsw_thermal *thermal, u8 local_port) |
| { |
| struct mlxsw_thermal_module *module_tz; |
| char pmlp_pl[MLXSW_REG_PMLP_LEN]; |
| u8 width, module; |
| int err; |
| |
| mlxsw_reg_pmlp_pack(pmlp_pl, local_port); |
| err = mlxsw_reg_query(core, MLXSW_REG(pmlp), pmlp_pl); |
| if (err) |
| return err; |
| |
| width = mlxsw_reg_pmlp_width_get(pmlp_pl); |
| if (!width) |
| return 0; |
| |
| module = mlxsw_reg_pmlp_module_get(pmlp_pl, 0); |
| module_tz = &thermal->tz_module_arr[module]; |
| /* Skip if parent is already set (case of port split). */ |
| if (module_tz->parent) |
| return 0; |
| module_tz->module = module; |
| module_tz->parent = thermal; |
| memcpy(module_tz->trips, default_thermal_trips, |
| sizeof(thermal->trips)); |
| /* Initialize all trip point. */ |
| mlxsw_thermal_module_trips_reset(module_tz); |
| /* Update trip point according to the module data. */ |
| return mlxsw_thermal_module_trips_update(dev, core, module_tz); |
| } |
| |
| static void mlxsw_thermal_module_fini(struct mlxsw_thermal_module *module_tz) |
| { |
| if (module_tz && module_tz->tzdev) { |
| mlxsw_thermal_module_tz_fini(module_tz->tzdev); |
| module_tz->tzdev = NULL; |
| module_tz->parent = NULL; |
| } |
| } |
| |
| static int |
| mlxsw_thermal_modules_init(struct device *dev, struct mlxsw_core *core, |
| struct mlxsw_thermal *thermal) |
| { |
| unsigned int module_count = mlxsw_core_max_ports(core); |
| struct mlxsw_thermal_module *module_tz; |
| int i, err; |
| |
| thermal->tz_module_arr = kcalloc(module_count, |
| sizeof(*thermal->tz_module_arr), |
| GFP_KERNEL); |
| if (!thermal->tz_module_arr) |
| return -ENOMEM; |
| |
| for (i = 1; i < module_count; i++) { |
| err = mlxsw_thermal_module_init(dev, core, thermal, i); |
| if (err) |
| goto err_unreg_tz_module_arr; |
| } |
| |
| for (i = 0; i < module_count - 1; i++) { |
| module_tz = &thermal->tz_module_arr[i]; |
| if (!module_tz->parent) |
| continue; |
| err = mlxsw_thermal_module_tz_init(module_tz); |
| if (err) |
| goto err_unreg_tz_module_arr; |
| } |
| |
| return 0; |
| |
| err_unreg_tz_module_arr: |
| for (i = module_count - 1; i >= 0; i--) |
| mlxsw_thermal_module_fini(&thermal->tz_module_arr[i]); |
| kfree(thermal->tz_module_arr); |
| return err; |
| } |
| |
| static void |
| mlxsw_thermal_modules_fini(struct mlxsw_thermal *thermal) |
| { |
| unsigned int module_count = mlxsw_core_max_ports(thermal->core); |
| int i; |
| |
| for (i = module_count - 1; i >= 0; i--) |
| mlxsw_thermal_module_fini(&thermal->tz_module_arr[i]); |
| kfree(thermal->tz_module_arr); |
| } |
| |
| int mlxsw_thermal_init(struct mlxsw_core *core, |
| const struct mlxsw_bus_info *bus_info, |
| struct mlxsw_thermal **p_thermal) |
| { |
| char mfcr_pl[MLXSW_REG_MFCR_LEN] = { 0 }; |
| enum mlxsw_reg_mfcr_pwm_frequency freq; |
| struct device *dev = bus_info->dev; |
| struct mlxsw_thermal *thermal; |
| u16 tacho_active; |
| u8 pwm_active; |
| int err, i; |
| |
| thermal = devm_kzalloc(dev, sizeof(*thermal), |
| GFP_KERNEL); |
| if (!thermal) |
| return -ENOMEM; |
| |
| thermal->core = core; |
| thermal->bus_info = bus_info; |
| memcpy(thermal->trips, default_thermal_trips, sizeof(thermal->trips)); |
| |
| err = mlxsw_reg_query(thermal->core, MLXSW_REG(mfcr), mfcr_pl); |
| if (err) { |
| dev_err(dev, "Failed to probe PWMs\n"); |
| goto err_free_thermal; |
| } |
| mlxsw_reg_mfcr_unpack(mfcr_pl, &freq, &tacho_active, &pwm_active); |
| |
| for (i = 0; i < MLXSW_MFCR_TACHOS_MAX; i++) { |
| if (tacho_active & BIT(i)) { |
| char mfsl_pl[MLXSW_REG_MFSL_LEN]; |
| |
| mlxsw_reg_mfsl_pack(mfsl_pl, i, 0, 0); |
| |
| /* We need to query the register to preserve maximum */ |
| err = mlxsw_reg_query(thermal->core, MLXSW_REG(mfsl), |
| mfsl_pl); |
| if (err) |
| goto err_free_thermal; |
| |
| /* set the minimal RPMs to 0 */ |
| mlxsw_reg_mfsl_tach_min_set(mfsl_pl, 0); |
| err = mlxsw_reg_write(thermal->core, MLXSW_REG(mfsl), |
| mfsl_pl); |
| if (err) |
| goto err_free_thermal; |
| } |
| } |
| for (i = 0; i < MLXSW_MFCR_PWMS_MAX; i++) { |
| if (pwm_active & BIT(i)) { |
| struct thermal_cooling_device *cdev; |
| |
| cdev = thermal_cooling_device_register("mlxsw_fan", |
| thermal, |
| &mlxsw_cooling_ops); |
| if (IS_ERR(cdev)) { |
| err = PTR_ERR(cdev); |
| dev_err(dev, "Failed to register cooling device\n"); |
| goto err_unreg_cdevs; |
| } |
| thermal->cdevs[i] = cdev; |
| } |
| } |
| |
| /* Initialize cooling levels per PWM state. */ |
| for (i = 0; i < MLXSW_THERMAL_MAX_STATE; i++) |
| thermal->cooling_levels[i] = max(MLXSW_THERMAL_SPEED_MIN_LEVEL, |
| i); |
| |
| thermal->polling_delay = bus_info->low_frequency ? |
| MLXSW_THERMAL_SLOW_POLL_INT : |
| MLXSW_THERMAL_POLL_INT; |
| |
| thermal->tzdev = thermal_zone_device_register("mlxsw", |
| MLXSW_THERMAL_NUM_TRIPS, |
| MLXSW_THERMAL_TRIP_MASK, |
| thermal, |
| &mlxsw_thermal_ops, |
| NULL, 0, |
| thermal->polling_delay); |
| if (IS_ERR(thermal->tzdev)) { |
| err = PTR_ERR(thermal->tzdev); |
| dev_err(dev, "Failed to register thermal zone\n"); |
| goto err_unreg_cdevs; |
| } |
| |
| err = mlxsw_thermal_modules_init(dev, core, thermal); |
| if (err) |
| goto err_unreg_tzdev; |
| |
| thermal->mode = THERMAL_DEVICE_ENABLED; |
| *p_thermal = thermal; |
| return 0; |
| |
| err_unreg_tzdev: |
| if (thermal->tzdev) { |
| thermal_zone_device_unregister(thermal->tzdev); |
| thermal->tzdev = NULL; |
| } |
| err_unreg_cdevs: |
| for (i = 0; i < MLXSW_MFCR_PWMS_MAX; i++) |
| if (thermal->cdevs[i]) |
| thermal_cooling_device_unregister(thermal->cdevs[i]); |
| err_free_thermal: |
| devm_kfree(dev, thermal); |
| return err; |
| } |
| |
| void mlxsw_thermal_fini(struct mlxsw_thermal *thermal) |
| { |
| int i; |
| |
| mlxsw_thermal_modules_fini(thermal); |
| if (thermal->tzdev) { |
| thermal_zone_device_unregister(thermal->tzdev); |
| thermal->tzdev = NULL; |
| } |
| |
| for (i = 0; i < MLXSW_MFCR_PWMS_MAX; i++) { |
| if (thermal->cdevs[i]) { |
| thermal_cooling_device_unregister(thermal->cdevs[i]); |
| thermal->cdevs[i] = NULL; |
| } |
| } |
| |
| devm_kfree(thermal->bus_info->dev, thermal); |
| } |