| /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ |
| /* |
| * Copyright(c) 2015 - 2017 Intel Corporation. |
| */ |
| |
| #ifndef _HFI1_MAD_H |
| #define _HFI1_MAD_H |
| |
| #include <rdma/ib_pma.h> |
| #include <rdma/opa_smi.h> |
| #include <rdma/opa_port_info.h> |
| #include "opa_compat.h" |
| |
| /* |
| * OPA Traps |
| */ |
| #define OPA_TRAP_GID_NOW_IN_SERVICE cpu_to_be16(64) |
| #define OPA_TRAP_GID_OUT_OF_SERVICE cpu_to_be16(65) |
| #define OPA_TRAP_ADD_MULTICAST_GROUP cpu_to_be16(66) |
| #define OPA_TRAL_DEL_MULTICAST_GROUP cpu_to_be16(67) |
| #define OPA_TRAP_UNPATH cpu_to_be16(68) |
| #define OPA_TRAP_REPATH cpu_to_be16(69) |
| #define OPA_TRAP_PORT_CHANGE_STATE cpu_to_be16(128) |
| #define OPA_TRAP_LINK_INTEGRITY cpu_to_be16(129) |
| #define OPA_TRAP_EXCESSIVE_BUFFER_OVERRUN cpu_to_be16(130) |
| #define OPA_TRAP_FLOW_WATCHDOG cpu_to_be16(131) |
| #define OPA_TRAP_CHANGE_CAPABILITY cpu_to_be16(144) |
| #define OPA_TRAP_CHANGE_SYSGUID cpu_to_be16(145) |
| #define OPA_TRAP_BAD_M_KEY cpu_to_be16(256) |
| #define OPA_TRAP_BAD_P_KEY cpu_to_be16(257) |
| #define OPA_TRAP_BAD_Q_KEY cpu_to_be16(258) |
| #define OPA_TRAP_SWITCH_BAD_PKEY cpu_to_be16(259) |
| #define OPA_SMA_TRAP_DATA_LINK_WIDTH cpu_to_be16(2048) |
| |
| /* |
| * Generic trap/notice other local changes flags (trap 144). |
| */ |
| #define OPA_NOTICE_TRAP_LWDE_CHG 0x08 /* Link Width Downgrade Enable |
| * changed |
| */ |
| #define OPA_NOTICE_TRAP_LSE_CHG 0x04 /* Link Speed Enable changed */ |
| #define OPA_NOTICE_TRAP_LWE_CHG 0x02 /* Link Width Enable changed */ |
| #define OPA_NOTICE_TRAP_NODE_DESC_CHG 0x01 |
| |
| struct opa_mad_notice_attr { |
| u8 generic_type; |
| u8 prod_type_msb; |
| __be16 prod_type_lsb; |
| __be16 trap_num; |
| __be16 toggle_count; |
| __be32 issuer_lid; |
| __be32 reserved1; |
| union ib_gid issuer_gid; |
| |
| union { |
| struct { |
| u8 details[64]; |
| } raw_data; |
| |
| struct { |
| union ib_gid gid; |
| } __packed ntc_64_65_66_67; |
| |
| struct { |
| __be32 lid; |
| } __packed ntc_128; |
| |
| struct { |
| __be32 lid; /* where violation happened */ |
| u8 port_num; /* where violation happened */ |
| } __packed ntc_129_130_131; |
| |
| struct { |
| __be32 lid; /* LID where change occurred */ |
| __be32 new_cap_mask; /* new capability mask */ |
| __be16 reserved2; |
| __be16 cap_mask3; |
| __be16 change_flags; /* low 4 bits only */ |
| } __packed ntc_144; |
| |
| struct { |
| __be64 new_sys_guid; |
| __be32 lid; /* lid where sys guid changed */ |
| } __packed ntc_145; |
| |
| struct { |
| __be32 lid; |
| __be32 dr_slid; |
| u8 method; |
| u8 dr_trunc_hop; |
| __be16 attr_id; |
| __be32 attr_mod; |
| __be64 mkey; |
| u8 dr_rtn_path[30]; |
| } __packed ntc_256; |
| |
| struct { |
| __be32 lid1; |
| __be32 lid2; |
| __be32 key; |
| u8 sl; /* SL: high 5 bits */ |
| u8 reserved3[3]; |
| union ib_gid gid1; |
| union ib_gid gid2; |
| __be32 qp1; /* high 8 bits reserved */ |
| __be32 qp2; /* high 8 bits reserved */ |
| } __packed ntc_257_258; |
| |
| struct { |
| __be16 flags; /* low 8 bits reserved */ |
| __be16 pkey; |
| __be32 lid1; |
| __be32 lid2; |
| u8 sl; /* SL: high 5 bits */ |
| u8 reserved4[3]; |
| union ib_gid gid1; |
| union ib_gid gid2; |
| __be32 qp1; /* high 8 bits reserved */ |
| __be32 qp2; /* high 8 bits reserved */ |
| } __packed ntc_259; |
| |
| struct { |
| __be32 lid; |
| } __packed ntc_2048; |
| |
| }; |
| u8 class_data[]; |
| }; |
| |
| #define IB_VLARB_LOWPRI_0_31 1 |
| #define IB_VLARB_LOWPRI_32_63 2 |
| #define IB_VLARB_HIGHPRI_0_31 3 |
| #define IB_VLARB_HIGHPRI_32_63 4 |
| |
| #define OPA_MAX_PREEMPT_CAP 32 |
| #define OPA_VLARB_LOW_ELEMENTS 0 |
| #define OPA_VLARB_HIGH_ELEMENTS 1 |
| #define OPA_VLARB_PREEMPT_ELEMENTS 2 |
| #define OPA_VLARB_PREEMPT_MATRIX 3 |
| |
| #define IB_PMA_PORT_COUNTERS_CONG cpu_to_be16(0xFF00) |
| #define LINK_SPEED_25G 1 |
| #define LINK_SPEED_12_5G 2 |
| #define LINK_WIDTH_DEFAULT 4 |
| #define DECIMAL_FACTORING 1000 |
| /* |
| * The default link width is multiplied by 1000 |
| * to get accurate value after division. |
| */ |
| #define FACTOR_LINK_WIDTH (LINK_WIDTH_DEFAULT * DECIMAL_FACTORING) |
| |
| struct ib_pma_portcounters_cong { |
| u8 reserved; |
| u8 reserved1; |
| __be16 port_check_rate; |
| __be16 symbol_error_counter; |
| u8 link_error_recovery_counter; |
| u8 link_downed_counter; |
| __be16 port_rcv_errors; |
| __be16 port_rcv_remphys_errors; |
| __be16 port_rcv_switch_relay_errors; |
| __be16 port_xmit_discards; |
| u8 port_xmit_constraint_errors; |
| u8 port_rcv_constraint_errors; |
| u8 reserved2; |
| u8 link_overrun_errors; /* LocalLink: 7:4, BufferOverrun: 3:0 */ |
| __be16 reserved3; |
| __be16 vl15_dropped; |
| __be64 port_xmit_data; |
| __be64 port_rcv_data; |
| __be64 port_xmit_packets; |
| __be64 port_rcv_packets; |
| __be64 port_xmit_wait; |
| __be64 port_adr_events; |
| } __packed; |
| |
| #define IB_SMP_UNSUP_VERSION cpu_to_be16(0x0004) |
| #define IB_SMP_UNSUP_METHOD cpu_to_be16(0x0008) |
| #define IB_SMP_UNSUP_METH_ATTR cpu_to_be16(0x000C) |
| #define IB_SMP_INVALID_FIELD cpu_to_be16(0x001C) |
| |
| #define OPA_MAX_PREEMPT_CAP 32 |
| #define OPA_VLARB_LOW_ELEMENTS 0 |
| #define OPA_VLARB_HIGH_ELEMENTS 1 |
| #define OPA_VLARB_PREEMPT_ELEMENTS 2 |
| #define OPA_VLARB_PREEMPT_MATRIX 3 |
| |
| #define HFI1_XMIT_RATE_UNSUPPORTED 0x0 |
| #define HFI1_XMIT_RATE_PICO 0x7 |
| /* number of 4nsec cycles equaling 2secs */ |
| #define HFI1_CONG_TIMER_PSINTERVAL 0x1DCD64EC |
| |
| #define IB_CC_SVCTYPE_RC 0x0 |
| #define IB_CC_SVCTYPE_UC 0x1 |
| #define IB_CC_SVCTYPE_RD 0x2 |
| #define IB_CC_SVCTYPE_UD 0x3 |
| |
| /* |
| * There should be an equivalent IB #define for the following, but |
| * I cannot find it. |
| */ |
| #define OPA_CC_LOG_TYPE_HFI 2 |
| |
| struct opa_hfi1_cong_log_event_internal { |
| u32 lqpn; |
| u32 rqpn; |
| u8 sl; |
| u8 svc_type; |
| u32 rlid; |
| u64 timestamp; /* wider than 32 bits to detect 32 bit rollover */ |
| }; |
| |
| struct opa_hfi1_cong_log_event { |
| u8 local_qp_cn_entry[3]; |
| u8 remote_qp_number_cn_entry[3]; |
| u8 sl_svc_type_cn_entry; /* 5 bits SL, 3 bits svc type */ |
| u8 reserved; |
| __be32 remote_lid_cn_entry; |
| __be32 timestamp_cn_entry; |
| } __packed; |
| |
| #define OPA_CONG_LOG_ELEMS 96 |
| |
| struct opa_hfi1_cong_log { |
| u8 log_type; |
| u8 congestion_flags; |
| __be16 threshold_event_counter; |
| __be32 current_time_stamp; |
| u8 threshold_cong_event_map[OPA_MAX_SLS / 8]; |
| struct opa_hfi1_cong_log_event events[OPA_CONG_LOG_ELEMS]; |
| } __packed; |
| |
| #define IB_CC_TABLE_CAP_DEFAULT 31 |
| |
| /* Port control flags */ |
| #define IB_CC_CCS_PC_SL_BASED 0x01 |
| |
| struct opa_congestion_setting_entry { |
| u8 ccti_increase; |
| u8 reserved; |
| __be16 ccti_timer; |
| u8 trigger_threshold; |
| u8 ccti_min; /* min CCTI for cc table */ |
| } __packed; |
| |
| struct opa_congestion_setting_entry_shadow { |
| u8 ccti_increase; |
| u8 reserved; |
| u16 ccti_timer; |
| u8 trigger_threshold; |
| u8 ccti_min; /* min CCTI for cc table */ |
| } __packed; |
| |
| struct opa_congestion_setting_attr { |
| __be32 control_map; |
| __be16 port_control; |
| struct opa_congestion_setting_entry entries[OPA_MAX_SLS]; |
| } __packed; |
| |
| struct opa_congestion_setting_attr_shadow { |
| u32 control_map; |
| u16 port_control; |
| struct opa_congestion_setting_entry_shadow entries[OPA_MAX_SLS]; |
| } __packed; |
| |
| #define IB_CC_TABLE_ENTRY_INCREASE_DEFAULT 1 |
| #define IB_CC_TABLE_ENTRY_TIMER_DEFAULT 1 |
| |
| /* 64 Congestion Control table entries in a single MAD */ |
| #define IB_CCT_ENTRIES 64 |
| #define IB_CCT_MIN_ENTRIES (IB_CCT_ENTRIES * 2) |
| |
| struct ib_cc_table_entry { |
| __be16 entry; /* shift:2, multiplier:14 */ |
| }; |
| |
| struct ib_cc_table_entry_shadow { |
| u16 entry; /* shift:2, multiplier:14 */ |
| }; |
| |
| struct ib_cc_table_attr { |
| __be16 ccti_limit; /* max CCTI for cc table */ |
| struct ib_cc_table_entry ccti_entries[IB_CCT_ENTRIES]; |
| } __packed; |
| |
| struct ib_cc_table_attr_shadow { |
| u16 ccti_limit; /* max CCTI for cc table */ |
| struct ib_cc_table_entry_shadow ccti_entries[IB_CCT_ENTRIES]; |
| } __packed; |
| |
| #define CC_TABLE_SHADOW_MAX \ |
| (IB_CC_TABLE_CAP_DEFAULT * IB_CCT_ENTRIES) |
| |
| struct cc_table_shadow { |
| u16 ccti_limit; /* max CCTI for cc table */ |
| struct ib_cc_table_entry_shadow entries[CC_TABLE_SHADOW_MAX]; |
| } __packed; |
| |
| /* |
| * struct cc_state combines the (active) per-port congestion control |
| * table, and the (active) per-SL congestion settings. cc_state data |
| * may need to be read in code paths that we want to be fast, so it |
| * is an RCU protected structure. |
| */ |
| struct cc_state { |
| struct rcu_head rcu; |
| struct cc_table_shadow cct; |
| struct opa_congestion_setting_attr_shadow cong_setting; |
| }; |
| |
| /* |
| * OPA BufferControl MAD |
| */ |
| |
| /* attribute modifier macros */ |
| #define OPA_AM_NPORT_SHIFT 24 |
| #define OPA_AM_NPORT_MASK 0xff |
| #define OPA_AM_NPORT_SMASK (OPA_AM_NPORT_MASK << OPA_AM_NPORT_SHIFT) |
| #define OPA_AM_NPORT(am) (((am) >> OPA_AM_NPORT_SHIFT) & \ |
| OPA_AM_NPORT_MASK) |
| |
| #define OPA_AM_NBLK_SHIFT 24 |
| #define OPA_AM_NBLK_MASK 0xff |
| #define OPA_AM_NBLK_SMASK (OPA_AM_NBLK_MASK << OPA_AM_NBLK_SHIFT) |
| #define OPA_AM_NBLK(am) (((am) >> OPA_AM_NBLK_SHIFT) & \ |
| OPA_AM_NBLK_MASK) |
| |
| #define OPA_AM_START_BLK_SHIFT 0 |
| #define OPA_AM_START_BLK_MASK 0xff |
| #define OPA_AM_START_BLK_SMASK (OPA_AM_START_BLK_MASK << \ |
| OPA_AM_START_BLK_SHIFT) |
| #define OPA_AM_START_BLK(am) (((am) >> OPA_AM_START_BLK_SHIFT) & \ |
| OPA_AM_START_BLK_MASK) |
| |
| #define OPA_AM_PORTNUM_SHIFT 0 |
| #define OPA_AM_PORTNUM_MASK 0xff |
| #define OPA_AM_PORTNUM_SMASK (OPA_AM_PORTNUM_MASK << OPA_AM_PORTNUM_SHIFT) |
| #define OPA_AM_PORTNUM(am) (((am) >> OPA_AM_PORTNUM_SHIFT) & \ |
| OPA_AM_PORTNUM_MASK) |
| |
| #define OPA_AM_ASYNC_SHIFT 12 |
| #define OPA_AM_ASYNC_MASK 0x1 |
| #define OPA_AM_ASYNC_SMASK (OPA_AM_ASYNC_MASK << OPA_AM_ASYNC_SHIFT) |
| #define OPA_AM_ASYNC(am) (((am) >> OPA_AM_ASYNC_SHIFT) & \ |
| OPA_AM_ASYNC_MASK) |
| |
| #define OPA_AM_START_SM_CFG_SHIFT 9 |
| #define OPA_AM_START_SM_CFG_MASK 0x1 |
| #define OPA_AM_START_SM_CFG_SMASK (OPA_AM_START_SM_CFG_MASK << \ |
| OPA_AM_START_SM_CFG_SHIFT) |
| #define OPA_AM_START_SM_CFG(am) (((am) >> OPA_AM_START_SM_CFG_SHIFT) \ |
| & OPA_AM_START_SM_CFG_MASK) |
| |
| #define OPA_AM_CI_ADDR_SHIFT 19 |
| #define OPA_AM_CI_ADDR_MASK 0xfff |
| #define OPA_AM_CI_ADDR_SMASK (OPA_AM_CI_ADDR_MASK << OPA_CI_ADDR_SHIFT) |
| #define OPA_AM_CI_ADDR(am) (((am) >> OPA_AM_CI_ADDR_SHIFT) & \ |
| OPA_AM_CI_ADDR_MASK) |
| |
| #define OPA_AM_CI_LEN_SHIFT 13 |
| #define OPA_AM_CI_LEN_MASK 0x3f |
| #define OPA_AM_CI_LEN_SMASK (OPA_AM_CI_LEN_MASK << OPA_CI_LEN_SHIFT) |
| #define OPA_AM_CI_LEN(am) (((am) >> OPA_AM_CI_LEN_SHIFT) & \ |
| OPA_AM_CI_LEN_MASK) |
| |
| /* error info macros */ |
| #define OPA_EI_STATUS_SMASK 0x80 |
| #define OPA_EI_CODE_SMASK 0x0f |
| |
| struct vl_limit { |
| __be16 dedicated; |
| __be16 shared; |
| }; |
| |
| struct buffer_control { |
| __be16 reserved; |
| __be16 overall_shared_limit; |
| struct vl_limit vl[OPA_MAX_VLS]; |
| }; |
| |
| struct sc2vlnt { |
| u8 vlnt[32]; /* 5 bit VL, 3 bits reserved */ |
| }; |
| |
| /* |
| * The PortSamplesControl.CounterMasks field is an array of 3 bit fields |
| * which specify the N'th counter's capabilities. See ch. 16.1.3.2. |
| * We support 5 counters which only count the mandatory quantities. |
| */ |
| #define COUNTER_MASK(q, n) (q << ((9 - n) * 3)) |
| #define COUNTER_MASK0_9 \ |
| cpu_to_be32(COUNTER_MASK(1, 0) | \ |
| COUNTER_MASK(1, 1) | \ |
| COUNTER_MASK(1, 2) | \ |
| COUNTER_MASK(1, 3) | \ |
| COUNTER_MASK(1, 4)) |
| |
| void hfi1_event_pkey_change(struct hfi1_devdata *dd, u32 port); |
| void hfi1_handle_trap_timer(struct timer_list *t); |
| u16 tx_link_width(u16 link_width); |
| u64 get_xmit_wait_counters(struct hfi1_pportdata *ppd, u16 link_width, |
| u16 link_speed, int vl); |
| /** |
| * get_link_speed - determine whether 12.5G or 25G speed |
| * @link_speed: the speed of active link |
| * @return: Return 2 if link speed identified as 12.5G |
| * or return 1 if link speed is 25G. |
| * |
| * The function indirectly calculate required link speed |
| * value for convert_xmit_counter function. If the link |
| * speed is 25G, the function return as 1 as it is required |
| * by xmit counter conversion formula :-( 25G / link_speed). |
| * This conversion will provide value 1 if current |
| * link speed is 25G or 2 if 12.5G.This is done to avoid |
| * 12.5 float number conversion. |
| */ |
| static inline u16 get_link_speed(u16 link_speed) |
| { |
| return (link_speed == 1) ? |
| LINK_SPEED_12_5G : LINK_SPEED_25G; |
| } |
| |
| /** |
| * convert_xmit_counter - calculate flit times for given xmit counter |
| * value |
| * @xmit_wait_val: current xmit counter value |
| * @link_width: width of active link |
| * @link_speed: speed of active link |
| * @return: return xmit counter value in flit times. |
| */ |
| static inline u64 convert_xmit_counter(u64 xmit_wait_val, u16 link_width, |
| u16 link_speed) |
| { |
| return (xmit_wait_val * 2 * (FACTOR_LINK_WIDTH / link_width) |
| * link_speed) / DECIMAL_FACTORING; |
| } |
| #endif /* _HFI1_MAD_H */ |