| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2019, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/adreno-smmu-priv.h> |
| #include <linux/of_device.h> |
| #include <linux/qcom_scm.h> |
| |
| #include "arm-smmu.h" |
| |
| struct qcom_smmu { |
| struct arm_smmu_device smmu; |
| bool bypass_quirk; |
| u8 bypass_cbndx; |
| u32 stall_enabled; |
| }; |
| |
| static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu) |
| { |
| return container_of(smmu, struct qcom_smmu, smmu); |
| } |
| |
| static void qcom_adreno_smmu_write_sctlr(struct arm_smmu_device *smmu, int idx, |
| u32 reg) |
| { |
| struct qcom_smmu *qsmmu = to_qcom_smmu(smmu); |
| |
| /* |
| * On the GPU device we want to process subsequent transactions after a |
| * fault to keep the GPU from hanging |
| */ |
| reg |= ARM_SMMU_SCTLR_HUPCF; |
| |
| if (qsmmu->stall_enabled & BIT(idx)) |
| reg |= ARM_SMMU_SCTLR_CFCFG; |
| |
| arm_smmu_cb_write(smmu, idx, ARM_SMMU_CB_SCTLR, reg); |
| } |
| |
| static void qcom_adreno_smmu_get_fault_info(const void *cookie, |
| struct adreno_smmu_fault_info *info) |
| { |
| struct arm_smmu_domain *smmu_domain = (void *)cookie; |
| struct arm_smmu_cfg *cfg = &smmu_domain->cfg; |
| struct arm_smmu_device *smmu = smmu_domain->smmu; |
| |
| info->fsr = arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_FSR); |
| info->fsynr0 = arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_FSYNR0); |
| info->fsynr1 = arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_FSYNR1); |
| info->far = arm_smmu_cb_readq(smmu, cfg->cbndx, ARM_SMMU_CB_FAR); |
| info->cbfrsynra = arm_smmu_gr1_read(smmu, ARM_SMMU_GR1_CBFRSYNRA(cfg->cbndx)); |
| info->ttbr0 = arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_TTBR0); |
| info->contextidr = arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_CONTEXTIDR); |
| } |
| |
| static void qcom_adreno_smmu_set_stall(const void *cookie, bool enabled) |
| { |
| struct arm_smmu_domain *smmu_domain = (void *)cookie; |
| struct arm_smmu_cfg *cfg = &smmu_domain->cfg; |
| struct qcom_smmu *qsmmu = to_qcom_smmu(smmu_domain->smmu); |
| |
| if (enabled) |
| qsmmu->stall_enabled |= BIT(cfg->cbndx); |
| else |
| qsmmu->stall_enabled &= ~BIT(cfg->cbndx); |
| } |
| |
| static void qcom_adreno_smmu_resume_translation(const void *cookie, bool terminate) |
| { |
| struct arm_smmu_domain *smmu_domain = (void *)cookie; |
| struct arm_smmu_cfg *cfg = &smmu_domain->cfg; |
| struct arm_smmu_device *smmu = smmu_domain->smmu; |
| u32 reg = 0; |
| |
| if (terminate) |
| reg |= ARM_SMMU_RESUME_TERMINATE; |
| |
| arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_RESUME, reg); |
| } |
| |
| #define QCOM_ADRENO_SMMU_GPU_SID 0 |
| |
| static bool qcom_adreno_smmu_is_gpu_device(struct device *dev) |
| { |
| struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev); |
| int i; |
| |
| /* |
| * The GPU will always use SID 0 so that is a handy way to uniquely |
| * identify it and configure it for per-instance pagetables |
| */ |
| for (i = 0; i < fwspec->num_ids; i++) { |
| u16 sid = FIELD_GET(ARM_SMMU_SMR_ID, fwspec->ids[i]); |
| |
| if (sid == QCOM_ADRENO_SMMU_GPU_SID) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static const struct io_pgtable_cfg *qcom_adreno_smmu_get_ttbr1_cfg( |
| const void *cookie) |
| { |
| struct arm_smmu_domain *smmu_domain = (void *)cookie; |
| struct io_pgtable *pgtable = |
| io_pgtable_ops_to_pgtable(smmu_domain->pgtbl_ops); |
| return &pgtable->cfg; |
| } |
| |
| /* |
| * Local implementation to configure TTBR0 with the specified pagetable config. |
| * The GPU driver will call this to enable TTBR0 when per-instance pagetables |
| * are active |
| */ |
| |
| static int qcom_adreno_smmu_set_ttbr0_cfg(const void *cookie, |
| const struct io_pgtable_cfg *pgtbl_cfg) |
| { |
| struct arm_smmu_domain *smmu_domain = (void *)cookie; |
| struct io_pgtable *pgtable = io_pgtable_ops_to_pgtable(smmu_domain->pgtbl_ops); |
| struct arm_smmu_cfg *cfg = &smmu_domain->cfg; |
| struct arm_smmu_cb *cb = &smmu_domain->smmu->cbs[cfg->cbndx]; |
| |
| /* The domain must have split pagetables already enabled */ |
| if (cb->tcr[0] & ARM_SMMU_TCR_EPD1) |
| return -EINVAL; |
| |
| /* If the pagetable config is NULL, disable TTBR0 */ |
| if (!pgtbl_cfg) { |
| /* Do nothing if it is already disabled */ |
| if ((cb->tcr[0] & ARM_SMMU_TCR_EPD0)) |
| return -EINVAL; |
| |
| /* Set TCR to the original configuration */ |
| cb->tcr[0] = arm_smmu_lpae_tcr(&pgtable->cfg); |
| cb->ttbr[0] = FIELD_PREP(ARM_SMMU_TTBRn_ASID, cb->cfg->asid); |
| } else { |
| u32 tcr = cb->tcr[0]; |
| |
| /* Don't call this again if TTBR0 is already enabled */ |
| if (!(cb->tcr[0] & ARM_SMMU_TCR_EPD0)) |
| return -EINVAL; |
| |
| tcr |= arm_smmu_lpae_tcr(pgtbl_cfg); |
| tcr &= ~(ARM_SMMU_TCR_EPD0 | ARM_SMMU_TCR_EPD1); |
| |
| cb->tcr[0] = tcr; |
| cb->ttbr[0] = pgtbl_cfg->arm_lpae_s1_cfg.ttbr; |
| cb->ttbr[0] |= FIELD_PREP(ARM_SMMU_TTBRn_ASID, cb->cfg->asid); |
| } |
| |
| arm_smmu_write_context_bank(smmu_domain->smmu, cb->cfg->cbndx); |
| |
| return 0; |
| } |
| |
| static int qcom_adreno_smmu_alloc_context_bank(struct arm_smmu_domain *smmu_domain, |
| struct arm_smmu_device *smmu, |
| struct device *dev, int start) |
| { |
| int count; |
| |
| /* |
| * Assign context bank 0 to the GPU device so the GPU hardware can |
| * switch pagetables |
| */ |
| if (qcom_adreno_smmu_is_gpu_device(dev)) { |
| start = 0; |
| count = 1; |
| } else { |
| start = 1; |
| count = smmu->num_context_banks; |
| } |
| |
| return __arm_smmu_alloc_bitmap(smmu->context_map, start, count); |
| } |
| |
| static bool qcom_adreno_can_do_ttbr1(struct arm_smmu_device *smmu) |
| { |
| const struct device_node *np = smmu->dev->of_node; |
| |
| if (of_device_is_compatible(np, "qcom,msm8996-smmu-v2")) |
| return false; |
| |
| return true; |
| } |
| |
| static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain, |
| struct io_pgtable_cfg *pgtbl_cfg, struct device *dev) |
| { |
| struct adreno_smmu_priv *priv; |
| |
| smmu_domain->cfg.flush_walk_prefer_tlbiasid = true; |
| |
| /* Only enable split pagetables for the GPU device (SID 0) */ |
| if (!qcom_adreno_smmu_is_gpu_device(dev)) |
| return 0; |
| |
| /* |
| * All targets that use the qcom,adreno-smmu compatible string *should* |
| * be AARCH64 stage 1 but double check because the arm-smmu code assumes |
| * that is the case when the TTBR1 quirk is enabled |
| */ |
| if (qcom_adreno_can_do_ttbr1(smmu_domain->smmu) && |
| (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) && |
| (smmu_domain->cfg.fmt == ARM_SMMU_CTX_FMT_AARCH64)) |
| pgtbl_cfg->quirks |= IO_PGTABLE_QUIRK_ARM_TTBR1; |
| |
| /* |
| * Initialize private interface with GPU: |
| */ |
| |
| priv = dev_get_drvdata(dev); |
| priv->cookie = smmu_domain; |
| priv->get_ttbr1_cfg = qcom_adreno_smmu_get_ttbr1_cfg; |
| priv->set_ttbr0_cfg = qcom_adreno_smmu_set_ttbr0_cfg; |
| priv->get_fault_info = qcom_adreno_smmu_get_fault_info; |
| priv->set_stall = qcom_adreno_smmu_set_stall; |
| priv->resume_translation = qcom_adreno_smmu_resume_translation; |
| |
| return 0; |
| } |
| |
| static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = { |
| { .compatible = "qcom,adreno" }, |
| { .compatible = "qcom,mdp4" }, |
| { .compatible = "qcom,mdss" }, |
| { .compatible = "qcom,sc7180-mdss" }, |
| { .compatible = "qcom,sc7180-mss-pil" }, |
| { .compatible = "qcom,sc7280-mdss" }, |
| { .compatible = "qcom,sc7280-mss-pil" }, |
| { .compatible = "qcom,sc8180x-mdss" }, |
| { .compatible = "qcom,sdm845-mdss" }, |
| { .compatible = "qcom,sdm845-mss-pil" }, |
| { } |
| }; |
| |
| static int qcom_smmu_init_context(struct arm_smmu_domain *smmu_domain, |
| struct io_pgtable_cfg *pgtbl_cfg, struct device *dev) |
| { |
| smmu_domain->cfg.flush_walk_prefer_tlbiasid = true; |
| |
| return 0; |
| } |
| |
| static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu) |
| { |
| unsigned int last_s2cr = ARM_SMMU_GR0_S2CR(smmu->num_mapping_groups - 1); |
| struct qcom_smmu *qsmmu = to_qcom_smmu(smmu); |
| u32 reg; |
| u32 smr; |
| int i; |
| |
| /* |
| * With some firmware versions writes to S2CR of type FAULT are |
| * ignored, and writing BYPASS will end up written as FAULT in the |
| * register. Perform a write to S2CR to detect if this is the case and |
| * if so reserve a context bank to emulate bypass streams. |
| */ |
| reg = FIELD_PREP(ARM_SMMU_S2CR_TYPE, S2CR_TYPE_BYPASS) | |
| FIELD_PREP(ARM_SMMU_S2CR_CBNDX, 0xff) | |
| FIELD_PREP(ARM_SMMU_S2CR_PRIVCFG, S2CR_PRIVCFG_DEFAULT); |
| arm_smmu_gr0_write(smmu, last_s2cr, reg); |
| reg = arm_smmu_gr0_read(smmu, last_s2cr); |
| if (FIELD_GET(ARM_SMMU_S2CR_TYPE, reg) != S2CR_TYPE_BYPASS) { |
| qsmmu->bypass_quirk = true; |
| qsmmu->bypass_cbndx = smmu->num_context_banks - 1; |
| |
| set_bit(qsmmu->bypass_cbndx, smmu->context_map); |
| |
| arm_smmu_cb_write(smmu, qsmmu->bypass_cbndx, ARM_SMMU_CB_SCTLR, 0); |
| |
| reg = FIELD_PREP(ARM_SMMU_CBAR_TYPE, CBAR_TYPE_S1_TRANS_S2_BYPASS); |
| arm_smmu_gr1_write(smmu, ARM_SMMU_GR1_CBAR(qsmmu->bypass_cbndx), reg); |
| } |
| |
| for (i = 0; i < smmu->num_mapping_groups; i++) { |
| smr = arm_smmu_gr0_read(smmu, ARM_SMMU_GR0_SMR(i)); |
| |
| if (FIELD_GET(ARM_SMMU_SMR_VALID, smr)) { |
| /* Ignore valid bit for SMR mask extraction. */ |
| smr &= ~ARM_SMMU_SMR_VALID; |
| smmu->smrs[i].id = FIELD_GET(ARM_SMMU_SMR_ID, smr); |
| smmu->smrs[i].mask = FIELD_GET(ARM_SMMU_SMR_MASK, smr); |
| smmu->smrs[i].valid = true; |
| |
| smmu->s2crs[i].type = S2CR_TYPE_BYPASS; |
| smmu->s2crs[i].privcfg = S2CR_PRIVCFG_DEFAULT; |
| smmu->s2crs[i].cbndx = 0xff; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void qcom_smmu_write_s2cr(struct arm_smmu_device *smmu, int idx) |
| { |
| struct arm_smmu_s2cr *s2cr = smmu->s2crs + idx; |
| struct qcom_smmu *qsmmu = to_qcom_smmu(smmu); |
| u32 cbndx = s2cr->cbndx; |
| u32 type = s2cr->type; |
| u32 reg; |
| |
| if (qsmmu->bypass_quirk) { |
| if (type == S2CR_TYPE_BYPASS) { |
| /* |
| * Firmware with quirky S2CR handling will substitute |
| * BYPASS writes with FAULT, so point the stream to the |
| * reserved context bank and ask for translation on the |
| * stream |
| */ |
| type = S2CR_TYPE_TRANS; |
| cbndx = qsmmu->bypass_cbndx; |
| } else if (type == S2CR_TYPE_FAULT) { |
| /* |
| * Firmware with quirky S2CR handling will ignore FAULT |
| * writes, so trick it to write FAULT by asking for a |
| * BYPASS. |
| */ |
| type = S2CR_TYPE_BYPASS; |
| cbndx = 0xff; |
| } |
| } |
| |
| reg = FIELD_PREP(ARM_SMMU_S2CR_TYPE, type) | |
| FIELD_PREP(ARM_SMMU_S2CR_CBNDX, cbndx) | |
| FIELD_PREP(ARM_SMMU_S2CR_PRIVCFG, s2cr->privcfg); |
| arm_smmu_gr0_write(smmu, ARM_SMMU_GR0_S2CR(idx), reg); |
| } |
| |
| static int qcom_smmu_def_domain_type(struct device *dev) |
| { |
| const struct of_device_id *match = |
| of_match_device(qcom_smmu_client_of_match, dev); |
| |
| return match ? IOMMU_DOMAIN_IDENTITY : 0; |
| } |
| |
| static int qcom_sdm845_smmu500_reset(struct arm_smmu_device *smmu) |
| { |
| int ret; |
| |
| /* |
| * To address performance degradation in non-real time clients, |
| * such as USB and UFS, turn off wait-for-safe on sdm845 based boards, |
| * such as MTP and db845, whose firmwares implement secure monitor |
| * call handlers to turn on/off the wait-for-safe logic. |
| */ |
| ret = qcom_scm_qsmmu500_wait_safe_toggle(0); |
| if (ret) |
| dev_warn(smmu->dev, "Failed to turn off SAFE logic\n"); |
| |
| return ret; |
| } |
| |
| static int qcom_smmu500_reset(struct arm_smmu_device *smmu) |
| { |
| const struct device_node *np = smmu->dev->of_node; |
| |
| arm_mmu500_reset(smmu); |
| |
| if (of_device_is_compatible(np, "qcom,sdm845-smmu-500")) |
| return qcom_sdm845_smmu500_reset(smmu); |
| |
| return 0; |
| } |
| |
| static const struct arm_smmu_impl qcom_smmu_impl = { |
| .init_context = qcom_smmu_init_context, |
| .cfg_probe = qcom_smmu_cfg_probe, |
| .def_domain_type = qcom_smmu_def_domain_type, |
| .reset = qcom_smmu500_reset, |
| .write_s2cr = qcom_smmu_write_s2cr, |
| }; |
| |
| static const struct arm_smmu_impl qcom_adreno_smmu_impl = { |
| .init_context = qcom_adreno_smmu_init_context, |
| .def_domain_type = qcom_smmu_def_domain_type, |
| .reset = qcom_smmu500_reset, |
| .alloc_context_bank = qcom_adreno_smmu_alloc_context_bank, |
| .write_sctlr = qcom_adreno_smmu_write_sctlr, |
| }; |
| |
| static struct arm_smmu_device *qcom_smmu_create(struct arm_smmu_device *smmu, |
| const struct arm_smmu_impl *impl) |
| { |
| struct qcom_smmu *qsmmu; |
| |
| /* Check to make sure qcom_scm has finished probing */ |
| if (!qcom_scm_is_available()) |
| return ERR_PTR(-EPROBE_DEFER); |
| |
| qsmmu = devm_krealloc(smmu->dev, smmu, sizeof(*qsmmu), GFP_KERNEL); |
| if (!qsmmu) |
| return ERR_PTR(-ENOMEM); |
| |
| qsmmu->smmu.impl = impl; |
| |
| return &qsmmu->smmu; |
| } |
| |
| static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = { |
| { .compatible = "qcom,msm8998-smmu-v2" }, |
| { .compatible = "qcom,qcm2290-smmu-500" }, |
| { .compatible = "qcom,sc7180-smmu-500" }, |
| { .compatible = "qcom,sc7280-smmu-500" }, |
| { .compatible = "qcom,sc8180x-smmu-500" }, |
| { .compatible = "qcom,sdm630-smmu-v2" }, |
| { .compatible = "qcom,sdm845-smmu-500" }, |
| { .compatible = "qcom,sm6125-smmu-500" }, |
| { .compatible = "qcom,sm6350-smmu-500" }, |
| { .compatible = "qcom,sm8150-smmu-500" }, |
| { .compatible = "qcom,sm8250-smmu-500" }, |
| { .compatible = "qcom,sm8350-smmu-500" }, |
| { } |
| }; |
| |
| #ifdef CONFIG_ACPI |
| static struct acpi_platform_list qcom_acpi_platlist[] = { |
| { "LENOVO", "CB-01 ", 0x8180, ACPI_SIG_IORT, equal, "QCOM SMMU" }, |
| { "QCOM ", "QCOMEDK2", 0x8180, ACPI_SIG_IORT, equal, "QCOM SMMU" }, |
| { } |
| }; |
| #endif |
| |
| struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu) |
| { |
| const struct device_node *np = smmu->dev->of_node; |
| |
| #ifdef CONFIG_ACPI |
| if (np == NULL) { |
| /* Match platform for ACPI boot */ |
| if (acpi_match_platform_list(qcom_acpi_platlist) >= 0) |
| return qcom_smmu_create(smmu, &qcom_smmu_impl); |
| } |
| #endif |
| |
| /* |
| * Do not change this order of implementation, i.e., first adreno |
| * smmu impl and then apss smmu since we can have both implementing |
| * arm,mmu-500 in which case we will miss setting adreno smmu specific |
| * features if the order is changed. |
| */ |
| if (of_device_is_compatible(np, "qcom,adreno-smmu")) |
| return qcom_smmu_create(smmu, &qcom_adreno_smmu_impl); |
| |
| if (of_match_node(qcom_smmu_impl_of_match, np)) |
| return qcom_smmu_create(smmu, &qcom_smmu_impl); |
| |
| return smmu; |
| } |