| /* |
| * da9052-regulator.c: Regulator driver for DA9052 |
| * |
| * Copyright(c) 2011 Dialog Semiconductor Ltd. |
| * |
| * Author: David Dajun Chen <dchen@diasemi.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #ifdef CONFIG_OF |
| #include <linux/of.h> |
| #include <linux/regulator/of_regulator.h> |
| #endif |
| |
| #include <linux/mfd/da9052/da9052.h> |
| #include <linux/mfd/da9052/reg.h> |
| #include <linux/mfd/da9052/pdata.h> |
| |
| /* Buck step size */ |
| #define DA9052_BUCK_PERI_3uV_STEP 100000 |
| #define DA9052_BUCK_PERI_REG_MAP_UPTO_3uV 24 |
| #define DA9052_CONST_3uV 3000000 |
| |
| #define DA9052_MIN_UA 0 |
| #define DA9052_MAX_UA 3 |
| #define DA9052_CURRENT_RANGE 4 |
| |
| /* Bit masks */ |
| #define DA9052_BUCK_ILIM_MASK_EVEN 0x0c |
| #define DA9052_BUCK_ILIM_MASK_ODD 0xc0 |
| |
| /* DA9052 REGULATOR IDs */ |
| #define DA9052_ID_BUCK1 0 |
| #define DA9052_ID_BUCK2 1 |
| #define DA9052_ID_BUCK3 2 |
| #define DA9052_ID_BUCK4 3 |
| #define DA9052_ID_LDO1 4 |
| #define DA9052_ID_LDO2 5 |
| #define DA9052_ID_LDO3 6 |
| #define DA9052_ID_LDO4 7 |
| #define DA9052_ID_LDO5 8 |
| #define DA9052_ID_LDO6 9 |
| #define DA9052_ID_LDO7 10 |
| #define DA9052_ID_LDO8 11 |
| #define DA9052_ID_LDO9 12 |
| #define DA9052_ID_LDO10 13 |
| |
| static const u32 da9052_current_limits[3][4] = { |
| {700000, 800000, 1000000, 1200000}, /* DA9052-BC BUCKs */ |
| {1600000, 2000000, 2400000, 3000000}, /* DA9053-AA/Bx BUCK-CORE */ |
| {800000, 1000000, 1200000, 1500000}, /* DA9053-AA/Bx BUCK-PRO, |
| * BUCK-MEM and BUCK-PERI |
| */ |
| }; |
| |
| struct da9052_regulator_info { |
| struct regulator_desc reg_desc; |
| int step_uV; |
| int min_uV; |
| int max_uV; |
| unsigned char activate_bit; |
| }; |
| |
| struct da9052_regulator { |
| struct da9052 *da9052; |
| struct da9052_regulator_info *info; |
| struct regulator_dev *rdev; |
| }; |
| |
| static int verify_range(struct da9052_regulator_info *info, |
| int min_uV, int max_uV) |
| { |
| if (min_uV > info->max_uV || max_uV < info->min_uV) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int da9052_dcdc_get_current_limit(struct regulator_dev *rdev) |
| { |
| struct da9052_regulator *regulator = rdev_get_drvdata(rdev); |
| int offset = rdev_get_id(rdev); |
| int ret, row = 2; |
| |
| ret = da9052_reg_read(regulator->da9052, DA9052_BUCKA_REG + offset/2); |
| if (ret < 0) |
| return ret; |
| |
| /* Determine the even or odd position of the buck current limit |
| * register field |
| */ |
| if (offset % 2 == 0) |
| ret = (ret & DA9052_BUCK_ILIM_MASK_EVEN) >> 2; |
| else |
| ret = (ret & DA9052_BUCK_ILIM_MASK_ODD) >> 6; |
| |
| /* Select the appropriate current limit range */ |
| if (regulator->da9052->chip_id == DA9052) |
| row = 0; |
| else if (offset == 0) |
| row = 1; |
| |
| return da9052_current_limits[row][ret]; |
| } |
| |
| static int da9052_dcdc_set_current_limit(struct regulator_dev *rdev, int min_uA, |
| int max_uA) |
| { |
| struct da9052_regulator *regulator = rdev_get_drvdata(rdev); |
| int offset = rdev_get_id(rdev); |
| int reg_val = 0; |
| int i, row = 2; |
| |
| /* Select the appropriate current limit range */ |
| if (regulator->da9052->chip_id == DA9052) |
| row = 0; |
| else if (offset == 0) |
| row = 1; |
| |
| for (i = DA9052_CURRENT_RANGE - 1; i >= 0; i--) { |
| if ((min_uA <= da9052_current_limits[row][i]) && |
| (da9052_current_limits[row][i] <= max_uA)) { |
| reg_val = i; |
| break; |
| } |
| } |
| |
| if (i < 0) |
| return -EINVAL; |
| |
| /* Determine the even or odd position of the buck current limit |
| * register field |
| */ |
| if (offset % 2 == 0) |
| return da9052_reg_update(regulator->da9052, |
| DA9052_BUCKA_REG + offset/2, |
| DA9052_BUCK_ILIM_MASK_EVEN, |
| reg_val << 2); |
| else |
| return da9052_reg_update(regulator->da9052, |
| DA9052_BUCKA_REG + offset/2, |
| DA9052_BUCK_ILIM_MASK_ODD, |
| reg_val << 6); |
| } |
| |
| static int da9052_list_voltage(struct regulator_dev *rdev, |
| unsigned int selector) |
| { |
| struct da9052_regulator *regulator = rdev_get_drvdata(rdev); |
| struct da9052_regulator_info *info = regulator->info; |
| int id = rdev_get_id(rdev); |
| int volt_uV; |
| |
| if ((id == DA9052_ID_BUCK4) && (regulator->da9052->chip_id == DA9052) |
| && (selector >= DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)) { |
| volt_uV = ((DA9052_BUCK_PERI_REG_MAP_UPTO_3uV * info->step_uV) |
| + info->min_uV); |
| volt_uV += (selector - DA9052_BUCK_PERI_REG_MAP_UPTO_3uV) |
| * (DA9052_BUCK_PERI_3uV_STEP); |
| } else { |
| volt_uV = (selector * info->step_uV) + info->min_uV; |
| } |
| |
| if (volt_uV > info->max_uV) |
| return -EINVAL; |
| |
| return volt_uV; |
| } |
| |
| static int da9052_map_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV) |
| { |
| struct da9052_regulator *regulator = rdev_get_drvdata(rdev); |
| struct da9052_regulator_info *info = regulator->info; |
| int id = rdev_get_id(rdev); |
| int ret, sel; |
| |
| ret = verify_range(info, min_uV, max_uV); |
| if (ret < 0) |
| return ret; |
| |
| if (min_uV < info->min_uV) |
| min_uV = info->min_uV; |
| |
| if ((id == DA9052_ID_BUCK4) && (regulator->da9052->chip_id == DA9052) |
| && (min_uV >= DA9052_CONST_3uV)) { |
| sel = DA9052_BUCK_PERI_REG_MAP_UPTO_3uV + |
| DIV_ROUND_UP(min_uV - DA9052_CONST_3uV, |
| DA9052_BUCK_PERI_3uV_STEP); |
| } else { |
| sel = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV); |
| } |
| |
| ret = da9052_list_voltage(rdev, sel); |
| if (ret < 0) |
| return ret; |
| |
| return sel; |
| } |
| |
| static int da9052_regulator_set_voltage_sel(struct regulator_dev *rdev, |
| unsigned int selector) |
| { |
| struct da9052_regulator *regulator = rdev_get_drvdata(rdev); |
| struct da9052_regulator_info *info = regulator->info; |
| int id = rdev_get_id(rdev); |
| int ret; |
| |
| ret = da9052_reg_update(regulator->da9052, rdev->desc->vsel_reg, |
| rdev->desc->vsel_mask, selector); |
| if (ret < 0) |
| return ret; |
| |
| /* Some LDOs and DCDCs are DVC controlled which requires enabling of |
| * the activate bit to implment the changes on the output. |
| */ |
| switch (id) { |
| case DA9052_ID_BUCK1: |
| case DA9052_ID_BUCK2: |
| case DA9052_ID_BUCK3: |
| case DA9052_ID_LDO2: |
| case DA9052_ID_LDO3: |
| ret = da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, |
| info->activate_bit, info->activate_bit); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int da9052_regulator_set_voltage_time_sel(struct regulator_dev *rdev, |
| unsigned int old_sel, |
| unsigned int new_sel) |
| { |
| struct da9052_regulator *regulator = rdev_get_drvdata(rdev); |
| struct da9052_regulator_info *info = regulator->info; |
| int id = rdev_get_id(rdev); |
| int ret = 0; |
| |
| /* The DVC controlled LDOs and DCDCs ramp with 6.25mV/µs after enabling |
| * the activate bit. |
| */ |
| switch (id) { |
| case DA9052_ID_BUCK1: |
| case DA9052_ID_BUCK2: |
| case DA9052_ID_BUCK3: |
| case DA9052_ID_LDO2: |
| case DA9052_ID_LDO3: |
| ret = (new_sel - old_sel) * info->step_uV / 6250; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static const struct regulator_ops da9052_dcdc_ops = { |
| .get_current_limit = da9052_dcdc_get_current_limit, |
| .set_current_limit = da9052_dcdc_set_current_limit, |
| |
| .list_voltage = da9052_list_voltage, |
| .map_voltage = da9052_map_voltage, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = da9052_regulator_set_voltage_sel, |
| .set_voltage_time_sel = da9052_regulator_set_voltage_time_sel, |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| }; |
| |
| static const struct regulator_ops da9052_ldo_ops = { |
| .list_voltage = da9052_list_voltage, |
| .map_voltage = da9052_map_voltage, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = da9052_regulator_set_voltage_sel, |
| .set_voltage_time_sel = da9052_regulator_set_voltage_time_sel, |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| }; |
| |
| #define DA9052_LDO(_id, step, min, max, sbits, ebits, abits) \ |
| {\ |
| .reg_desc = {\ |
| .name = #_id,\ |
| .ops = &da9052_ldo_ops,\ |
| .type = REGULATOR_VOLTAGE,\ |
| .id = DA9052_ID_##_id,\ |
| .n_voltages = (max - min) / step + 1, \ |
| .owner = THIS_MODULE,\ |
| .vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \ |
| .vsel_mask = (1 << (sbits)) - 1,\ |
| .enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \ |
| .enable_mask = 1 << (ebits),\ |
| },\ |
| .min_uV = (min) * 1000,\ |
| .max_uV = (max) * 1000,\ |
| .step_uV = (step) * 1000,\ |
| .activate_bit = (abits),\ |
| } |
| |
| #define DA9052_DCDC(_id, step, min, max, sbits, ebits, abits) \ |
| {\ |
| .reg_desc = {\ |
| .name = #_id,\ |
| .ops = &da9052_dcdc_ops,\ |
| .type = REGULATOR_VOLTAGE,\ |
| .id = DA9052_ID_##_id,\ |
| .n_voltages = (max - min) / step + 1, \ |
| .owner = THIS_MODULE,\ |
| .vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \ |
| .vsel_mask = (1 << (sbits)) - 1,\ |
| .enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \ |
| .enable_mask = 1 << (ebits),\ |
| },\ |
| .min_uV = (min) * 1000,\ |
| .max_uV = (max) * 1000,\ |
| .step_uV = (step) * 1000,\ |
| .activate_bit = (abits),\ |
| } |
| |
| static struct da9052_regulator_info da9052_regulator_info[] = { |
| DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), |
| DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), |
| DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO), |
| DA9052_DCDC(BUCK4, 50, 1800, 3600, 5, 6, 0), |
| DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0), |
| DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), |
| DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO), |
| DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0), |
| DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0), |
| DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0), |
| DA9052_LDO(LDO7, 50, 1200, 3600, 6, 6, 0), |
| DA9052_LDO(LDO8, 50, 1200, 3600, 6, 6, 0), |
| DA9052_LDO(LDO9, 50, 1250, 3650, 6, 6, 0), |
| DA9052_LDO(LDO10, 50, 1200, 3600, 6, 6, 0), |
| }; |
| |
| static struct da9052_regulator_info da9053_regulator_info[] = { |
| DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), |
| DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), |
| DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO), |
| DA9052_DCDC(BUCK4, 25, 950, 2525, 6, 6, 0), |
| DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0), |
| DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), |
| DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO), |
| DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0), |
| DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0), |
| DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0), |
| DA9052_LDO(LDO7, 50, 1200, 3600, 6, 6, 0), |
| DA9052_LDO(LDO8, 50, 1200, 3600, 6, 6, 0), |
| DA9052_LDO(LDO9, 50, 1250, 3650, 6, 6, 0), |
| DA9052_LDO(LDO10, 50, 1200, 3600, 6, 6, 0), |
| }; |
| |
| static inline struct da9052_regulator_info *find_regulator_info(u8 chip_id, |
| int id) |
| { |
| struct da9052_regulator_info *info; |
| int i; |
| |
| switch (chip_id) { |
| case DA9052: |
| for (i = 0; i < ARRAY_SIZE(da9052_regulator_info); i++) { |
| info = &da9052_regulator_info[i]; |
| if (info->reg_desc.id == id) |
| return info; |
| } |
| break; |
| case DA9053_AA: |
| case DA9053_BA: |
| case DA9053_BB: |
| case DA9053_BC: |
| for (i = 0; i < ARRAY_SIZE(da9053_regulator_info); i++) { |
| info = &da9053_regulator_info[i]; |
| if (info->reg_desc.id == id) |
| return info; |
| } |
| break; |
| } |
| |
| return NULL; |
| } |
| |
| static int da9052_regulator_probe(struct platform_device *pdev) |
| { |
| const struct mfd_cell *cell = mfd_get_cell(pdev); |
| struct regulator_config config = { }; |
| struct da9052_regulator *regulator; |
| struct da9052 *da9052; |
| struct da9052_pdata *pdata; |
| |
| regulator = devm_kzalloc(&pdev->dev, sizeof(struct da9052_regulator), |
| GFP_KERNEL); |
| if (!regulator) |
| return -ENOMEM; |
| |
| da9052 = dev_get_drvdata(pdev->dev.parent); |
| pdata = dev_get_platdata(da9052->dev); |
| regulator->da9052 = da9052; |
| |
| regulator->info = find_regulator_info(regulator->da9052->chip_id, |
| cell->id); |
| if (regulator->info == NULL) { |
| dev_err(&pdev->dev, "invalid regulator ID specified\n"); |
| return -EINVAL; |
| } |
| |
| config.dev = &pdev->dev; |
| config.driver_data = regulator; |
| config.regmap = da9052->regmap; |
| if (pdata) { |
| config.init_data = pdata->regulators[cell->id]; |
| } else { |
| #ifdef CONFIG_OF |
| struct device_node *nproot = da9052->dev->of_node; |
| struct device_node *np; |
| |
| if (!nproot) |
| return -ENODEV; |
| |
| nproot = of_get_child_by_name(nproot, "regulators"); |
| if (!nproot) |
| return -ENODEV; |
| |
| for_each_child_of_node(nproot, np) { |
| if (of_node_name_eq(np, |
| regulator->info->reg_desc.name)) { |
| config.init_data = of_get_regulator_init_data( |
| &pdev->dev, np, |
| ®ulator->info->reg_desc); |
| config.of_node = np; |
| break; |
| } |
| } |
| of_node_put(nproot); |
| #endif |
| } |
| |
| regulator->rdev = devm_regulator_register(&pdev->dev, |
| ®ulator->info->reg_desc, |
| &config); |
| if (IS_ERR(regulator->rdev)) { |
| dev_err(&pdev->dev, "failed to register regulator %s\n", |
| regulator->info->reg_desc.name); |
| return PTR_ERR(regulator->rdev); |
| } |
| |
| platform_set_drvdata(pdev, regulator); |
| |
| return 0; |
| } |
| |
| static struct platform_driver da9052_regulator_driver = { |
| .probe = da9052_regulator_probe, |
| .driver = { |
| .name = "da9052-regulator", |
| }, |
| }; |
| |
| static int __init da9052_regulator_init(void) |
| { |
| return platform_driver_register(&da9052_regulator_driver); |
| } |
| subsys_initcall(da9052_regulator_init); |
| |
| static void __exit da9052_regulator_exit(void) |
| { |
| platform_driver_unregister(&da9052_regulator_driver); |
| } |
| module_exit(da9052_regulator_exit); |
| |
| MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); |
| MODULE_DESCRIPTION("Power Regulator driver for Dialog DA9052 PMIC"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:da9052-regulator"); |