| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * linux/arch/parisc/kernel/signal.c: Architecture-specific signal |
| * handling support. |
| * |
| * Copyright (C) 2000 David Huggins-Daines <dhd@debian.org> |
| * Copyright (C) 2000 Linuxcare, Inc. |
| * |
| * Based on the ia64, i386, and alpha versions. |
| * |
| * Like the IA-64, we are a recent enough port (we are *starting* |
| * with glibc2.2) that we do not need to support the old non-realtime |
| * Linux signals. Therefore we don't. |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/sched/debug.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/kernel.h> |
| #include <linux/signal.h> |
| #include <linux/errno.h> |
| #include <linux/wait.h> |
| #include <linux/ptrace.h> |
| #include <linux/tracehook.h> |
| #include <linux/unistd.h> |
| #include <linux/stddef.h> |
| #include <linux/compat.h> |
| #include <linux/elf.h> |
| #include <asm/ucontext.h> |
| #include <asm/rt_sigframe.h> |
| #include <linux/uaccess.h> |
| #include <asm/pgalloc.h> |
| #include <asm/cacheflush.h> |
| #include <asm/asm-offsets.h> |
| |
| #ifdef CONFIG_COMPAT |
| #include "signal32.h" |
| #endif |
| |
| #define DEBUG_SIG 0 |
| #define DEBUG_SIG_LEVEL 2 |
| |
| #if DEBUG_SIG |
| #define DBG(LEVEL, ...) \ |
| ((DEBUG_SIG_LEVEL >= LEVEL) \ |
| ? printk(__VA_ARGS__) : (void) 0) |
| #else |
| #define DBG(LEVEL, ...) |
| #endif |
| |
| /* gcc will complain if a pointer is cast to an integer of different |
| * size. If you really need to do this (and we do for an ELF32 user |
| * application in an ELF64 kernel) then you have to do a cast to an |
| * integer of the same size first. The A() macro accomplishes |
| * this. */ |
| #define A(__x) ((unsigned long)(__x)) |
| |
| /* |
| * Do a signal return - restore sigcontext. |
| */ |
| |
| /* Trampoline for calling rt_sigreturn() */ |
| #define INSN_LDI_R25_0 0x34190000 /* ldi 0,%r25 (in_syscall=0) */ |
| #define INSN_LDI_R25_1 0x34190002 /* ldi 1,%r25 (in_syscall=1) */ |
| #define INSN_LDI_R20 0x3414015a /* ldi __NR_rt_sigreturn,%r20 */ |
| #define INSN_BLE_SR2_R0 0xe4008200 /* be,l 0x100(%sr2,%r0),%sr0,%r31 */ |
| /* For debugging */ |
| #define INSN_DIE_HORRIBLY 0x68000ccc /* stw %r0,0x666(%sr0,%r0) */ |
| |
| static long |
| restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs) |
| { |
| long err = 0; |
| |
| err |= __copy_from_user(regs->gr, sc->sc_gr, sizeof(regs->gr)); |
| err |= __copy_from_user(regs->fr, sc->sc_fr, sizeof(regs->fr)); |
| err |= __copy_from_user(regs->iaoq, sc->sc_iaoq, sizeof(regs->iaoq)); |
| err |= __copy_from_user(regs->iasq, sc->sc_iasq, sizeof(regs->iasq)); |
| err |= __get_user(regs->sar, &sc->sc_sar); |
| DBG(2,"restore_sigcontext: iaoq is %#lx / %#lx\n", |
| regs->iaoq[0],regs->iaoq[1]); |
| DBG(2,"restore_sigcontext: r28 is %ld\n", regs->gr[28]); |
| return err; |
| } |
| |
| void |
| sys_rt_sigreturn(struct pt_regs *regs, int in_syscall) |
| { |
| struct rt_sigframe __user *frame; |
| sigset_t set; |
| unsigned long usp = (regs->gr[30] & ~(0x01UL)); |
| unsigned long sigframe_size = PARISC_RT_SIGFRAME_SIZE; |
| #ifdef CONFIG_64BIT |
| struct compat_rt_sigframe __user * compat_frame; |
| |
| if (is_compat_task()) |
| sigframe_size = PARISC_RT_SIGFRAME_SIZE32; |
| #endif |
| |
| current->restart_block.fn = do_no_restart_syscall; |
| |
| /* Unwind the user stack to get the rt_sigframe structure. */ |
| frame = (struct rt_sigframe __user *) |
| (usp - sigframe_size); |
| DBG(2,"sys_rt_sigreturn: frame is %p\n", frame); |
| |
| regs->orig_r28 = 1; /* no restarts for sigreturn */ |
| |
| #ifdef CONFIG_64BIT |
| compat_frame = (struct compat_rt_sigframe __user *)frame; |
| |
| if (is_compat_task()) { |
| DBG(2,"sys_rt_sigreturn: ELF32 process.\n"); |
| if (get_compat_sigset(&set, &compat_frame->uc.uc_sigmask)) |
| goto give_sigsegv; |
| } else |
| #endif |
| { |
| if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) |
| goto give_sigsegv; |
| } |
| |
| set_current_blocked(&set); |
| |
| /* Good thing we saved the old gr[30], eh? */ |
| #ifdef CONFIG_64BIT |
| if (is_compat_task()) { |
| DBG(1,"sys_rt_sigreturn: compat_frame->uc.uc_mcontext 0x%p\n", |
| &compat_frame->uc.uc_mcontext); |
| // FIXME: Load upper half from register file |
| if (restore_sigcontext32(&compat_frame->uc.uc_mcontext, |
| &compat_frame->regs, regs)) |
| goto give_sigsegv; |
| DBG(1,"sys_rt_sigreturn: usp %#08lx stack 0x%p\n", |
| usp, &compat_frame->uc.uc_stack); |
| if (compat_restore_altstack(&compat_frame->uc.uc_stack)) |
| goto give_sigsegv; |
| } else |
| #endif |
| { |
| DBG(1,"sys_rt_sigreturn: frame->uc.uc_mcontext 0x%p\n", |
| &frame->uc.uc_mcontext); |
| if (restore_sigcontext(&frame->uc.uc_mcontext, regs)) |
| goto give_sigsegv; |
| DBG(1,"sys_rt_sigreturn: usp %#08lx stack 0x%p\n", |
| usp, &frame->uc.uc_stack); |
| if (restore_altstack(&frame->uc.uc_stack)) |
| goto give_sigsegv; |
| } |
| |
| |
| |
| /* If we are on the syscall path IAOQ will not be restored, and |
| * if we are on the interrupt path we must not corrupt gr31. |
| */ |
| if (in_syscall) |
| regs->gr[31] = regs->iaoq[0]; |
| #if DEBUG_SIG |
| DBG(1,"sys_rt_sigreturn: returning to %#lx, DUMPING REGS:\n", regs->iaoq[0]); |
| show_regs(regs); |
| #endif |
| return; |
| |
| give_sigsegv: |
| DBG(1,"sys_rt_sigreturn: Sending SIGSEGV\n"); |
| force_sig(SIGSEGV); |
| return; |
| } |
| |
| /* |
| * Set up a signal frame. |
| */ |
| |
| static inline void __user * |
| get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) |
| { |
| /*FIXME: ELF32 vs. ELF64 has different frame_size, but since we |
| don't use the parameter it doesn't matter */ |
| |
| DBG(1,"get_sigframe: ka = %#lx, sp = %#lx, frame_size = %#lx\n", |
| (unsigned long)ka, sp, frame_size); |
| |
| /* Align alternate stack and reserve 64 bytes for the signal |
| handler's frame marker. */ |
| if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp)) |
| sp = (current->sas_ss_sp + 0x7f) & ~0x3f; /* Stacks grow up! */ |
| |
| DBG(1,"get_sigframe: Returning sp = %#lx\n", (unsigned long)sp); |
| return (void __user *) sp; /* Stacks grow up. Fun. */ |
| } |
| |
| static long |
| setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, int in_syscall) |
| |
| { |
| unsigned long flags = 0; |
| long err = 0; |
| |
| if (on_sig_stack((unsigned long) sc)) |
| flags |= PARISC_SC_FLAG_ONSTACK; |
| if (in_syscall) { |
| flags |= PARISC_SC_FLAG_IN_SYSCALL; |
| /* regs->iaoq is undefined in the syscall return path */ |
| err |= __put_user(regs->gr[31], &sc->sc_iaoq[0]); |
| err |= __put_user(regs->gr[31]+4, &sc->sc_iaoq[1]); |
| err |= __put_user(regs->sr[3], &sc->sc_iasq[0]); |
| err |= __put_user(regs->sr[3], &sc->sc_iasq[1]); |
| DBG(1,"setup_sigcontext: iaoq %#lx / %#lx (in syscall)\n", |
| regs->gr[31], regs->gr[31]+4); |
| } else { |
| err |= __copy_to_user(sc->sc_iaoq, regs->iaoq, sizeof(regs->iaoq)); |
| err |= __copy_to_user(sc->sc_iasq, regs->iasq, sizeof(regs->iasq)); |
| DBG(1,"setup_sigcontext: iaoq %#lx / %#lx (not in syscall)\n", |
| regs->iaoq[0], regs->iaoq[1]); |
| } |
| |
| err |= __put_user(flags, &sc->sc_flags); |
| err |= __copy_to_user(sc->sc_gr, regs->gr, sizeof(regs->gr)); |
| err |= __copy_to_user(sc->sc_fr, regs->fr, sizeof(regs->fr)); |
| err |= __put_user(regs->sar, &sc->sc_sar); |
| DBG(1,"setup_sigcontext: r28 is %ld\n", regs->gr[28]); |
| |
| return err; |
| } |
| |
| static long |
| setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs, |
| int in_syscall) |
| { |
| struct rt_sigframe __user *frame; |
| unsigned long rp, usp; |
| unsigned long haddr, sigframe_size; |
| unsigned long start, end; |
| int err = 0; |
| #ifdef CONFIG_64BIT |
| struct compat_rt_sigframe __user * compat_frame; |
| #endif |
| |
| usp = (regs->gr[30] & ~(0x01UL)); |
| /*FIXME: frame_size parameter is unused, remove it. */ |
| frame = get_sigframe(&ksig->ka, usp, sizeof(*frame)); |
| |
| DBG(1,"SETUP_RT_FRAME: START\n"); |
| DBG(1,"setup_rt_frame: frame %p info %p\n", frame, ksig->info); |
| |
| |
| #ifdef CONFIG_64BIT |
| |
| compat_frame = (struct compat_rt_sigframe __user *)frame; |
| |
| if (is_compat_task()) { |
| DBG(1,"setup_rt_frame: frame->info = 0x%p\n", &compat_frame->info); |
| err |= copy_siginfo_to_user32(&compat_frame->info, &ksig->info); |
| err |= __compat_save_altstack( &compat_frame->uc.uc_stack, regs->gr[30]); |
| DBG(1,"setup_rt_frame: frame->uc = 0x%p\n", &compat_frame->uc); |
| DBG(1,"setup_rt_frame: frame->uc.uc_mcontext = 0x%p\n", &compat_frame->uc.uc_mcontext); |
| err |= setup_sigcontext32(&compat_frame->uc.uc_mcontext, |
| &compat_frame->regs, regs, in_syscall); |
| err |= put_compat_sigset(&compat_frame->uc.uc_sigmask, set, |
| sizeof(compat_sigset_t)); |
| } else |
| #endif |
| { |
| DBG(1,"setup_rt_frame: frame->info = 0x%p\n", &frame->info); |
| err |= copy_siginfo_to_user(&frame->info, &ksig->info); |
| err |= __save_altstack(&frame->uc.uc_stack, regs->gr[30]); |
| DBG(1,"setup_rt_frame: frame->uc = 0x%p\n", &frame->uc); |
| DBG(1,"setup_rt_frame: frame->uc.uc_mcontext = 0x%p\n", &frame->uc.uc_mcontext); |
| err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, in_syscall); |
| /* FIXME: Should probably be converted as well for the compat case */ |
| err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); |
| } |
| |
| if (err) |
| return -EFAULT; |
| |
| /* Set up to return from userspace. If provided, use a stub |
| already in userspace. The first words of tramp are used to |
| save the previous sigrestartblock trampoline that might be |
| on the stack. We start the sigreturn trampoline at |
| SIGRESTARTBLOCK_TRAMP+X. */ |
| err |= __put_user(in_syscall ? INSN_LDI_R25_1 : INSN_LDI_R25_0, |
| &frame->tramp[SIGRESTARTBLOCK_TRAMP+0]); |
| err |= __put_user(INSN_LDI_R20, |
| &frame->tramp[SIGRESTARTBLOCK_TRAMP+1]); |
| err |= __put_user(INSN_BLE_SR2_R0, |
| &frame->tramp[SIGRESTARTBLOCK_TRAMP+2]); |
| err |= __put_user(INSN_NOP, &frame->tramp[SIGRESTARTBLOCK_TRAMP+3]); |
| |
| #if DEBUG_SIG |
| /* Assert that we're flushing in the correct space... */ |
| { |
| unsigned long sid; |
| asm ("mfsp %%sr3,%0" : "=r" (sid)); |
| DBG(1,"setup_rt_frame: Flushing 64 bytes at space %#x offset %p\n", |
| sid, frame->tramp); |
| } |
| #endif |
| |
| start = (unsigned long) &frame->tramp[0]; |
| end = (unsigned long) &frame->tramp[TRAMP_SIZE]; |
| flush_user_dcache_range_asm(start, end); |
| flush_user_icache_range_asm(start, end); |
| |
| /* TRAMP Words 0-4, Length 5 = SIGRESTARTBLOCK_TRAMP |
| * TRAMP Words 5-9, Length 4 = SIGRETURN_TRAMP |
| * So the SIGRETURN_TRAMP is at the end of SIGRESTARTBLOCK_TRAMP |
| */ |
| rp = (unsigned long) &frame->tramp[SIGRESTARTBLOCK_TRAMP]; |
| |
| if (err) |
| return -EFAULT; |
| |
| haddr = A(ksig->ka.sa.sa_handler); |
| /* The sa_handler may be a pointer to a function descriptor */ |
| #ifdef CONFIG_64BIT |
| if (is_compat_task()) { |
| #endif |
| if (haddr & PA_PLABEL_FDESC) { |
| Elf32_Fdesc fdesc; |
| Elf32_Fdesc __user *ufdesc = (Elf32_Fdesc __user *)A(haddr & ~3); |
| |
| err = __copy_from_user(&fdesc, ufdesc, sizeof(fdesc)); |
| |
| if (err) |
| return -EFAULT; |
| |
| haddr = fdesc.addr; |
| regs->gr[19] = fdesc.gp; |
| } |
| #ifdef CONFIG_64BIT |
| } else { |
| Elf64_Fdesc fdesc; |
| Elf64_Fdesc __user *ufdesc = (Elf64_Fdesc __user *)A(haddr & ~3); |
| |
| err = __copy_from_user(&fdesc, ufdesc, sizeof(fdesc)); |
| |
| if (err) |
| return -EFAULT; |
| |
| haddr = fdesc.addr; |
| regs->gr[19] = fdesc.gp; |
| DBG(1,"setup_rt_frame: 64 bit signal, exe=%#lx, r19=%#lx, in_syscall=%d\n", |
| haddr, regs->gr[19], in_syscall); |
| } |
| #endif |
| |
| /* The syscall return path will create IAOQ values from r31. |
| */ |
| sigframe_size = PARISC_RT_SIGFRAME_SIZE; |
| #ifdef CONFIG_64BIT |
| if (is_compat_task()) |
| sigframe_size = PARISC_RT_SIGFRAME_SIZE32; |
| #endif |
| if (in_syscall) { |
| regs->gr[31] = haddr; |
| #ifdef CONFIG_64BIT |
| if (!test_thread_flag(TIF_32BIT)) |
| sigframe_size |= 1; |
| #endif |
| } else { |
| unsigned long psw = USER_PSW; |
| #ifdef CONFIG_64BIT |
| if (!test_thread_flag(TIF_32BIT)) |
| psw |= PSW_W; |
| #endif |
| |
| /* If we are singlestepping, arrange a trap to be delivered |
| when we return to userspace. Note the semantics -- we |
| should trap before the first insn in the handler is |
| executed. Ref: |
| http://sources.redhat.com/ml/gdb/2004-11/msg00245.html |
| */ |
| if (pa_psw(current)->r) { |
| pa_psw(current)->r = 0; |
| psw |= PSW_R; |
| mtctl(-1, 0); |
| } |
| |
| regs->gr[0] = psw; |
| regs->iaoq[0] = haddr | 3; |
| regs->iaoq[1] = regs->iaoq[0] + 4; |
| } |
| |
| regs->gr[2] = rp; /* userland return pointer */ |
| regs->gr[26] = ksig->sig; /* signal number */ |
| |
| #ifdef CONFIG_64BIT |
| if (is_compat_task()) { |
| regs->gr[25] = A(&compat_frame->info); /* siginfo pointer */ |
| regs->gr[24] = A(&compat_frame->uc); /* ucontext pointer */ |
| } else |
| #endif |
| { |
| regs->gr[25] = A(&frame->info); /* siginfo pointer */ |
| regs->gr[24] = A(&frame->uc); /* ucontext pointer */ |
| } |
| |
| DBG(1,"setup_rt_frame: making sigreturn frame: %#lx + %#lx = %#lx\n", |
| regs->gr[30], sigframe_size, |
| regs->gr[30] + sigframe_size); |
| /* Raise the user stack pointer to make a proper call frame. */ |
| regs->gr[30] = (A(frame) + sigframe_size); |
| |
| |
| DBG(1,"setup_rt_frame: sig deliver (%s,%d) frame=0x%p sp=%#lx iaoq=%#lx/%#lx rp=%#lx\n", |
| current->comm, current->pid, frame, regs->gr[30], |
| regs->iaoq[0], regs->iaoq[1], rp); |
| |
| return 0; |
| } |
| |
| /* |
| * OK, we're invoking a handler. |
| */ |
| |
| static void |
| handle_signal(struct ksignal *ksig, struct pt_regs *regs, int in_syscall) |
| { |
| int ret; |
| sigset_t *oldset = sigmask_to_save(); |
| |
| DBG(1,"handle_signal: sig=%ld, ka=%p, info=%p, oldset=%p, regs=%p\n", |
| ksig->sig, ksig->ka, ksig->info, oldset, regs); |
| |
| /* Set up the stack frame */ |
| ret = setup_rt_frame(ksig, oldset, regs, in_syscall); |
| |
| signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP) || |
| test_thread_flag(TIF_BLOCKSTEP)); |
| |
| DBG(1,KERN_DEBUG "do_signal: Exit (success), regs->gr[28] = %ld\n", |
| regs->gr[28]); |
| } |
| |
| /* |
| * Check how the syscall number gets loaded into %r20 within |
| * the delay branch in userspace and adjust as needed. |
| */ |
| |
| static void check_syscallno_in_delay_branch(struct pt_regs *regs) |
| { |
| u32 opcode, source_reg; |
| u32 __user *uaddr; |
| int err; |
| |
| /* Usually we don't have to restore %r20 (the system call number) |
| * because it gets loaded in the delay slot of the branch external |
| * instruction via the ldi instruction. |
| * In some cases a register-to-register copy instruction might have |
| * been used instead, in which case we need to copy the syscall |
| * number into the source register before returning to userspace. |
| */ |
| |
| /* A syscall is just a branch, so all we have to do is fiddle the |
| * return pointer so that the ble instruction gets executed again. |
| */ |
| regs->gr[31] -= 8; /* delayed branching */ |
| |
| /* Get assembler opcode of code in delay branch */ |
| uaddr = (unsigned int *) ((regs->gr[31] & ~3) + 4); |
| err = get_user(opcode, uaddr); |
| if (err) |
| return; |
| |
| /* Check if delay branch uses "ldi int,%r20" */ |
| if ((opcode & 0xffff0000) == 0x34140000) |
| return; /* everything ok, just return */ |
| |
| /* Check if delay branch uses "nop" */ |
| if (opcode == INSN_NOP) |
| return; |
| |
| /* Check if delay branch uses "copy %rX,%r20" */ |
| if ((opcode & 0xffe0ffff) == 0x08000254) { |
| source_reg = (opcode >> 16) & 31; |
| regs->gr[source_reg] = regs->gr[20]; |
| return; |
| } |
| |
| pr_warn("syscall restart: %s (pid %d): unexpected opcode 0x%08x\n", |
| current->comm, task_pid_nr(current), opcode); |
| } |
| |
| static inline void |
| syscall_restart(struct pt_regs *regs, struct k_sigaction *ka) |
| { |
| if (regs->orig_r28) |
| return; |
| regs->orig_r28 = 1; /* no more restarts */ |
| /* Check the return code */ |
| switch (regs->gr[28]) { |
| case -ERESTART_RESTARTBLOCK: |
| case -ERESTARTNOHAND: |
| DBG(1,"ERESTARTNOHAND: returning -EINTR\n"); |
| regs->gr[28] = -EINTR; |
| break; |
| |
| case -ERESTARTSYS: |
| if (!(ka->sa.sa_flags & SA_RESTART)) { |
| DBG(1,"ERESTARTSYS: putting -EINTR\n"); |
| regs->gr[28] = -EINTR; |
| break; |
| } |
| /* fallthrough */ |
| case -ERESTARTNOINTR: |
| check_syscallno_in_delay_branch(regs); |
| break; |
| } |
| } |
| |
| static inline void |
| insert_restart_trampoline(struct pt_regs *regs) |
| { |
| if (regs->orig_r28) |
| return; |
| regs->orig_r28 = 1; /* no more restarts */ |
| switch(regs->gr[28]) { |
| case -ERESTART_RESTARTBLOCK: { |
| /* Restart the system call - no handlers present */ |
| unsigned int *usp = (unsigned int *)regs->gr[30]; |
| unsigned long start = (unsigned long) &usp[2]; |
| unsigned long end = (unsigned long) &usp[5]; |
| long err = 0; |
| |
| /* Setup a trampoline to restart the syscall |
| * with __NR_restart_syscall |
| * |
| * 0: <return address (orig r31)> |
| * 4: <2nd half for 64-bit> |
| * 8: ldw 0(%sp), %r31 |
| * 12: be 0x100(%sr2, %r0) |
| * 16: ldi __NR_restart_syscall, %r20 |
| */ |
| #ifdef CONFIG_64BIT |
| err |= put_user(regs->gr[31] >> 32, &usp[0]); |
| err |= put_user(regs->gr[31] & 0xffffffff, &usp[1]); |
| err |= put_user(0x0fc010df, &usp[2]); |
| #else |
| err |= put_user(regs->gr[31], &usp[0]); |
| err |= put_user(0x0fc0109f, &usp[2]); |
| #endif |
| err |= put_user(0xe0008200, &usp[3]); |
| err |= put_user(0x34140000, &usp[4]); |
| |
| WARN_ON(err); |
| |
| /* flush data/instruction cache for new insns */ |
| flush_user_dcache_range_asm(start, end); |
| flush_user_icache_range_asm(start, end); |
| |
| regs->gr[31] = regs->gr[30] + 8; |
| return; |
| } |
| case -ERESTARTNOHAND: |
| case -ERESTARTSYS: |
| case -ERESTARTNOINTR: |
| check_syscallno_in_delay_branch(regs); |
| return; |
| default: |
| break; |
| } |
| } |
| |
| /* |
| * Note that 'init' is a special process: it doesn't get signals it doesn't |
| * want to handle. Thus you cannot kill init even with a SIGKILL even by |
| * mistake. |
| * |
| * We need to be able to restore the syscall arguments (r21-r26) to |
| * restart syscalls. Thus, the syscall path should save them in the |
| * pt_regs structure (it's okay to do so since they are caller-save |
| * registers). As noted below, the syscall number gets restored for |
| * us due to the magic of delayed branching. |
| */ |
| asmlinkage void |
| do_signal(struct pt_regs *regs, long in_syscall) |
| { |
| struct ksignal ksig; |
| |
| DBG(1,"\ndo_signal: regs=0x%p, sr7 %#lx, in_syscall=%d\n", |
| regs, regs->sr[7], in_syscall); |
| |
| if (get_signal(&ksig)) { |
| DBG(3,"do_signal: signr = %d, regs->gr[28] = %ld\n", signr, regs->gr[28]); |
| /* Restart a system call if necessary. */ |
| if (in_syscall) |
| syscall_restart(regs, &ksig.ka); |
| |
| handle_signal(&ksig, regs, in_syscall); |
| return; |
| } |
| |
| /* Did we come from a system call? */ |
| if (in_syscall) |
| insert_restart_trampoline(regs); |
| |
| DBG(1,"do_signal: Exit (not delivered), regs->gr[28] = %ld\n", |
| regs->gr[28]); |
| |
| restore_saved_sigmask(); |
| } |
| |
| void do_notify_resume(struct pt_regs *regs, long in_syscall) |
| { |
| if (test_thread_flag(TIF_SIGPENDING)) |
| do_signal(regs, in_syscall); |
| |
| if (test_thread_flag(TIF_NOTIFY_RESUME)) { |
| clear_thread_flag(TIF_NOTIFY_RESUME); |
| tracehook_notify_resume(regs); |
| } |
| } |