| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/media/renesas,drif.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF) |
| |
| maintainers: |
| - Ramesh Shanmugasundaram <rashanmu@gmail.com> |
| - Fabrizio Castro <fabrizio.castro.jz@renesas.com> |
| |
| description: | |
| R-Car Gen3 DRIF is a SPI like receive only slave device. A general |
| representation of DRIF interfacing with a master device is shown below. |
| |
| +---------------------+ +---------------------+ |
| | |-----SCK------->|CLK | |
| | Master |-----SS-------->|SYNC DRIFn (slave) | |
| | |-----SD0------->|D0 | |
| | |-----SD1------->|D1 | |
| +---------------------+ +---------------------+ |
| |
| As per datasheet, each DRIF channel (drifn) is made up of two internal |
| channels (drifn0 & drifn1). These two internal channels share the common |
| CLK & SYNC. Each internal channel has its own dedicated resources like |
| irq, dma channels, address space & clock. This internal split is not |
| visible to the external master device. |
| |
| The device tree model represents each internal channel as a separate node. |
| The internal channels sharing the CLK & SYNC are tied together by their |
| phandles using a property called "renesas,bonding". For the rest of |
| the documentation, unless explicitly stated, the word channel implies an |
| internal channel. |
| |
| When both internal channels are enabled they need to be managed together |
| as one (i.e.) they cannot operate alone as independent devices. Out of the |
| two, one of them needs to act as a primary device that accepts common |
| properties of both the internal channels. This channel is identified by a |
| property called "renesas,primary-bond". |
| |
| To summarize, |
| * When both the internal channels that are bonded together are enabled, |
| the zeroth channel is selected as primary-bond. This channels accepts |
| properties common to all the members of the bond. |
| * When only one of the bonded channels need to be enabled, the property |
| "renesas,bonding" or "renesas,primary-bond" will have no effect. That |
| enabled channel can act alone as any other independent device. |
| |
| properties: |
| compatible: |
| items: |
| - enum: |
| - renesas,r8a7795-drif # R-Car H3 |
| - renesas,r8a7796-drif # R-Car M3-W |
| - renesas,r8a77965-drif # R-Car M3-N |
| - renesas,r8a77990-drif # R-Car E3 |
| - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| clocks: |
| maxItems: 1 |
| |
| clock-names: |
| const: fck |
| |
| resets: |
| maxItems: 1 |
| |
| dmas: |
| minItems: 1 |
| maxItems: 2 |
| |
| dma-names: |
| minItems: 1 |
| items: |
| - const: rx |
| - const: rx |
| |
| renesas,bonding: |
| $ref: /schemas/types.yaml#/definitions/phandle |
| description: |
| The phandle to the other internal channel of DRIF |
| |
| power-domains: |
| maxItems: 1 |
| |
| renesas,primary-bond: |
| type: boolean |
| description: |
| Indicates that the channel acts as primary among the bonded channels. |
| |
| port: |
| $ref: /schemas/graph.yaml#/properties/port |
| unevaluatedProperties: false |
| description: |
| Child port node corresponding to the data input. The port node must |
| contain at least one endpoint. |
| |
| properties: |
| endpoint: |
| $ref: /schemas/graph.yaml#/$defs/endpoint-base |
| unevaluatedProperties: false |
| |
| properties: |
| sync-active: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| enum: [0, 1] |
| description: |
| Indicates sync signal polarity, 0/1 for low/high respectively. |
| This property maps to SYNCAC bit in the hardware manual. The |
| default is 1 (active high). |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| - clocks |
| - clock-names |
| - resets |
| - dmas |
| - dma-names |
| - renesas,bonding |
| - power-domains |
| |
| allOf: |
| - if: |
| required: |
| - renesas,primary-bond |
| then: |
| required: |
| - pinctrl-0 |
| - pinctrl-names |
| - port |
| |
| - if: |
| required: |
| - port |
| then: |
| required: |
| - pinctrl-0 |
| - pinctrl-names |
| else: |
| properties: |
| pinctrl-0: false |
| pinctrl-names: false |
| |
| additionalProperties: false |
| |
| examples: |
| # Example with both internal channels enabled. |
| # |
| # When interfacing with a third party tuner device with two data pins as shown |
| # below. |
| # |
| # +---------------------+ +---------------------+ |
| # | |-----SCK------->|CLK | |
| # | Master |-----SS-------->|SYNC DRIFn (slave) | |
| # | |-----SD0------->|D0 | |
| # | |-----SD1------->|D1 | |
| # +---------------------+ +---------------------+ |
| - | |
| #include <dt-bindings/clock/r8a7795-cpg-mssr.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/r8a7795-sysc.h> |
| |
| soc { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| drif00: rif@e6f40000 { |
| compatible = "renesas,r8a7795-drif", |
| "renesas,rcar-gen3-drif"; |
| reg = <0 0xe6f40000 0 0x64>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 515>; |
| clock-names = "fck"; |
| dmas = <&dmac1 0x20>, <&dmac2 0x20>; |
| dma-names = "rx", "rx"; |
| power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; |
| renesas,bonding = <&drif01>; |
| resets = <&cpg 515>; |
| renesas,primary-bond; |
| pinctrl-0 = <&drif0_pins>; |
| pinctrl-names = "default"; |
| port { |
| drif0_ep: endpoint { |
| remote-endpoint = <&tuner_ep>; |
| }; |
| }; |
| }; |
| |
| drif01: rif@e6f50000 { |
| compatible = "renesas,r8a7795-drif", |
| "renesas,rcar-gen3-drif"; |
| reg = <0 0xe6f50000 0 0x64>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 514>; |
| clock-names = "fck"; |
| dmas = <&dmac1 0x22>, <&dmac2 0x22>; |
| dma-names = "rx", "rx"; |
| power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; |
| renesas,bonding = <&drif00>; |
| resets = <&cpg 514>; |
| }; |
| }; |
| |
| # Example with internal channel 1 alone enabled. |
| # |
| # When interfacing with a third party tuner device with one data pin as shown |
| # below. |
| # |
| # +---------------------+ +---------------------+ |
| # | |-----SCK------->|CLK | |
| # | Master |-----SS-------->|SYNC DRIFn (slave) | |
| # | | |D0 (unused) | |
| # | |-----SD-------->|D1 | |
| # +---------------------+ +---------------------+ |
| - | |
| #include <dt-bindings/clock/r8a7795-cpg-mssr.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/r8a7795-sysc.h> |
| |
| soc { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| drif10: rif@e6f60000 { |
| compatible = "renesas,r8a7795-drif", |
| "renesas,rcar-gen3-drif"; |
| reg = <0 0xe6f60000 0 0x64>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 513>; |
| clock-names = "fck"; |
| dmas = <&dmac1 0x24>, <&dmac2 0x24>; |
| dma-names = "rx", "rx"; |
| power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; |
| resets = <&cpg 513>; |
| renesas,bonding = <&drif11>; |
| status = "disabled"; |
| }; |
| |
| drif11: rif@e6f70000 { |
| compatible = "renesas,r8a7795-drif", |
| "renesas,rcar-gen3-drif"; |
| reg = <0 0xe6f70000 0 0x64>; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 512>; |
| clock-names = "fck"; |
| dmas = <&dmac1 0x26>, <&dmac2 0x26>; |
| dma-names = "rx", "rx"; |
| power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; |
| resets = <&cpg 512>; |
| renesas,bonding = <&drif10>; |
| pinctrl-0 = <&drif1_pins>; |
| pinctrl-names = "default"; |
| port { |
| drif1_ep: endpoint { |
| remote-endpoint = <&tuner_ep1>; |
| sync-active = <0>; |
| }; |
| }; |
| }; |
| }; |
| ... |
