| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/regulator/richtek,rt4801-regulator.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Richtek RT4801 Display Bias regulators |
| |
| maintainers: |
| - ChiYuan Huang <cy_huang@richtek.com> |
| |
| description: | |
| Regulator nodes should be named to DSVP and DSVN. The |
| definition for each of these nodes is defined using the standard |
| binding for regulators at |
| Documentation/devicetree/bindings/regulator/regulator.txt. |
| Datasheet is available at |
| https://www.richtek.com/assets/product_file/RT4801H/DS4801H-00.pdf |
| |
| #The valid names for RT4801 regulator nodes are: |
| #DSVP, DSVN |
| |
| properties: |
| compatible: |
| enum: |
| - richtek,rt4801 |
| |
| reg: |
| maxItems: 1 |
| |
| enable-gpios: |
| description: GPIOs to use to enable DSVP/DSVN regulator. |
| The first one is ENP to enable DSVP, and second one is ENM to enable DSVN. |
| Number of GPIO in the array list could be 1 or 2. |
| If only one gpio is specified, only one gpio used to control ENP/ENM. |
| Else both are spefied, DSVP/DSVN could be controlled individually. |
| Othersie, this property not specified. treat both as always-on regulator. |
| minItems: 1 |
| maxItems: 2 |
| |
| patternProperties: |
| "^DSV(P|N)$": |
| type: object |
| $ref: regulator.yaml# |
| description: |
| Properties for single display bias regulator. |
| |
| required: |
| - compatible |
| - reg |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| rt4801@73 { |
| compatible = "richtek,rt4801"; |
| reg = <0x73>; |
| enable-gpios = <&gpio26 2 0>, <&gpio26 3 0>; |
| |
| dsvp: DSVP { |
| regulator-name = "rt4801,dsvp"; |
| regulator-min-microvolt = <4000000>; |
| regulator-max-microvolt = <6000000>; |
| regulator-boot-on; |
| }; |
| dsvn: DSVN { |
| regulator-name = "rt4801,dsvn"; |
| regulator-min-microvolt = <4000000>; |
| regulator-max-microvolt = <6000000>; |
| regulator-boot-on; |
| }; |
| |
| }; |
| }; |
