| TWL family of regulators |
| |
| Required properties: |
| For twl6030 regulators/LDOs |
| - compatible: |
| - "ti,twl6030-vaux1" for VAUX1 LDO |
| - "ti,twl6030-vaux2" for VAUX2 LDO |
| - "ti,twl6030-vaux3" for VAUX3 LDO |
| - "ti,twl6030-vmmc" for VMMC LDO |
| - "ti,twl6030-vpp" for VPP LDO |
| - "ti,twl6030-vusim" for VUSIM LDO |
| - "ti,twl6030-vana" for VANA LDO |
| - "ti,twl6030-vcxio" for VCXIO LDO |
| - "ti,twl6030-vdac" for VDAC LDO |
| - "ti,twl6030-vusb" for VUSB LDO |
| - "ti,twl6030-v1v8" for V1V8 LDO |
| - "ti,twl6030-v2v1" for V2V1 LDO |
| - "ti,twl6030-vdd1" for VDD1 SMPS |
| - "ti,twl6030-vdd2" for VDD2 SMPS |
| - "ti,twl6030-vdd3" for VDD3 SMPS |
| For twl6032 regulators/LDOs |
| - compatible: |
| - "ti,twl6032-ldo1" for LDO1 LDO |
| - "ti,twl6032-ldo2" for LDO2 LDO |
| - "ti,twl6032-ldo3" for LDO3 LDO |
| - "ti,twl6032-ldo4" for LDO4 LDO |
| - "ti,twl6032-ldo5" for LDO5 LDO |
| - "ti,twl6032-ldo6" for LDO6 LDO |
| - "ti,twl6032-ldo7" for LDO7 LDO |
| - "ti,twl6032-ldoln" for LDOLN LDO |
| - "ti,twl6032-ldousb" for LDOUSB LDO |
| - "ti,twl6032-smps3" for SMPS3 SMPS |
| - "ti,twl6032-smps4" for SMPS4 SMPS |
| - "ti,twl6032-vio" for VIO SMPS |
| For twl4030 regulators/LDOs |
| - compatible: |
| - "ti,twl4030-vaux1" for VAUX1 LDO |
| - "ti,twl4030-vaux2" for VAUX2 LDO |
| - "ti,twl5030-vaux2" for VAUX2 LDO |
| - "ti,twl4030-vaux3" for VAUX3 LDO |
| - "ti,twl4030-vaux4" for VAUX4 LDO |
| - "ti,twl4030-vmmc1" for VMMC1 LDO |
| - "ti,twl4030-vmmc2" for VMMC2 LDO |
| - "ti,twl4030-vpll1" for VPLL1 LDO |
| - "ti,twl4030-vpll2" for VPLL2 LDO |
| - "ti,twl4030-vsim" for VSIM LDO |
| - "ti,twl4030-vdac" for VDAC LDO |
| - "ti,twl4030-vintana2" for VINTANA2 LDO |
| - "ti,twl4030-vio" for VIO LDO |
| - "ti,twl4030-vdd1" for VDD1 SMPS |
| - "ti,twl4030-vdd2" for VDD2 SMPS |
| - "ti,twl4030-vintana1" for VINTANA1 LDO |
| - "ti,twl4030-vintdig" for VINTDIG LDO |
| - "ti,twl4030-vusb1v5" for VUSB1V5 LDO |
| - "ti,twl4030-vusb1v8" for VUSB1V8 LDO |
| - "ti,twl4030-vusb3v1" for VUSB3V1 LDO |
| |
| Optional properties: |
| - Any optional property defined in bindings/regulator/regulator.txt |
| For twl4030 regulators/LDOs: |
| - regulator-initial-mode: |
| - 0x08 - Sleep mode, the nominal output voltage is maintained with low power |
| consumption with low load current capability. |
| - 0x0e - Active mode, the regulator can deliver its nominal output voltage |
| with full-load current capability. |
| |
| Example: |
| |
| xyz: regulator@0 { |
| compatible = "ti,twl6030-vaux1"; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| |
| For twl6030 regulators/LDOs: |
| |
| - ti,retain-on-reset: Does not turn off the supplies during warm |
| reset. Could be needed for VMMC, as TWL6030 |
| reset sequence for this signal does not comply |
| with the SD specification. |
