| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Derived from arch/i386/kernel/irq.c |
| * Copyright (C) 1992 Linus Torvalds |
| * Adapted from arch/i386 by Gary Thomas |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) |
| * Updated and modified by Cort Dougan <cort@fsmlabs.com> |
| * Copyright (C) 1996-2001 Cort Dougan |
| * Adapted for Power Macintosh by Paul Mackerras |
| * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) |
| * |
| * This file contains the code used by various IRQ handling routines: |
| * asking for different IRQ's should be done through these routines |
| * instead of just grabbing them. Thus setups with different IRQ numbers |
| * shouldn't result in any weird surprises, and installing new handlers |
| * should be easier. |
| * |
| * The MPC8xx has an interrupt mask in the SIU. If a bit is set, the |
| * interrupt is _enabled_. As expected, IRQ0 is bit 0 in the 32-bit |
| * mask register (of which only 16 are defined), hence the weird shifting |
| * and complement of the cached_irq_mask. I want to be able to stuff |
| * this right into the SIU SMASK register. |
| * Many of the prep/chrp functions are conditional compiled on CONFIG_PPC_8xx |
| * to reduce code space and undefined function references. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/export.h> |
| #include <linux/threads.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/ptrace.h> |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/timex.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/seq_file.h> |
| #include <linux/cpumask.h> |
| #include <linux/profile.h> |
| #include <linux/bitops.h> |
| #include <linux/list.h> |
| #include <linux/radix-tree.h> |
| #include <linux/mutex.h> |
| #include <linux/pci.h> |
| #include <linux/debugfs.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| #include <linux/vmalloc.h> |
| #include <linux/pgtable.h> |
| |
| #include <linux/uaccess.h> |
| #include <asm/interrupt.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/cache.h> |
| #include <asm/prom.h> |
| #include <asm/ptrace.h> |
| #include <asm/machdep.h> |
| #include <asm/udbg.h> |
| #include <asm/smp.h> |
| #include <asm/livepatch.h> |
| #include <asm/asm-prototypes.h> |
| #include <asm/hw_irq.h> |
| #include <asm/softirq_stack.h> |
| |
| #ifdef CONFIG_PPC64 |
| #include <asm/paca.h> |
| #include <asm/firmware.h> |
| #include <asm/lv1call.h> |
| #include <asm/dbell.h> |
| #endif |
| #define CREATE_TRACE_POINTS |
| #include <asm/trace.h> |
| #include <asm/cpu_has_feature.h> |
| |
| DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); |
| EXPORT_PER_CPU_SYMBOL(irq_stat); |
| |
| #ifdef CONFIG_PPC32 |
| atomic_t ppc_n_lost_interrupts; |
| |
| #ifdef CONFIG_TAU_INT |
| extern int tau_initialized; |
| u32 tau_interrupts(unsigned long cpu); |
| #endif |
| #endif /* CONFIG_PPC32 */ |
| |
| #ifdef CONFIG_PPC64 |
| |
| int distribute_irqs = 1; |
| |
| static inline notrace unsigned long get_irq_happened(void) |
| { |
| unsigned long happened; |
| |
| __asm__ __volatile__("lbz %0,%1(13)" |
| : "=r" (happened) : "i" (offsetof(struct paca_struct, irq_happened))); |
| |
| return happened; |
| } |
| |
| void replay_soft_interrupts(void) |
| { |
| struct pt_regs regs; |
| |
| /* |
| * Be careful here, calling these interrupt handlers can cause |
| * softirqs to be raised, which they may run when calling irq_exit, |
| * which will cause local_irq_enable() to be run, which can then |
| * recurse into this function. Don't keep any state across |
| * interrupt handler calls which may change underneath us. |
| * |
| * We use local_paca rather than get_paca() to avoid all the |
| * debug_smp_processor_id() business in this low level function. |
| */ |
| |
| ppc_save_regs(®s); |
| regs.softe = IRQS_ENABLED; |
| regs.msr |= MSR_EE; |
| |
| again: |
| if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) |
| WARN_ON_ONCE(mfmsr() & MSR_EE); |
| |
| /* |
| * Force the delivery of pending soft-disabled interrupts on PS3. |
| * Any HV call will have this side effect. |
| */ |
| if (firmware_has_feature(FW_FEATURE_PS3_LV1)) { |
| u64 tmp, tmp2; |
| lv1_get_version_info(&tmp, &tmp2); |
| } |
| |
| /* |
| * Check if an hypervisor Maintenance interrupt happened. |
| * This is a higher priority interrupt than the others, so |
| * replay it first. |
| */ |
| if (IS_ENABLED(CONFIG_PPC_BOOK3S) && (local_paca->irq_happened & PACA_IRQ_HMI)) { |
| local_paca->irq_happened &= ~PACA_IRQ_HMI; |
| regs.trap = INTERRUPT_HMI; |
| handle_hmi_exception(®s); |
| if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS)) |
| hard_irq_disable(); |
| } |
| |
| if (local_paca->irq_happened & PACA_IRQ_DEC) { |
| local_paca->irq_happened &= ~PACA_IRQ_DEC; |
| regs.trap = INTERRUPT_DECREMENTER; |
| timer_interrupt(®s); |
| if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS)) |
| hard_irq_disable(); |
| } |
| |
| if (local_paca->irq_happened & PACA_IRQ_EE) { |
| local_paca->irq_happened &= ~PACA_IRQ_EE; |
| regs.trap = INTERRUPT_EXTERNAL; |
| do_IRQ(®s); |
| if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS)) |
| hard_irq_disable(); |
| } |
| |
| if (IS_ENABLED(CONFIG_PPC_DOORBELL) && (local_paca->irq_happened & PACA_IRQ_DBELL)) { |
| local_paca->irq_happened &= ~PACA_IRQ_DBELL; |
| regs.trap = INTERRUPT_DOORBELL; |
| doorbell_exception(®s); |
| if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS)) |
| hard_irq_disable(); |
| } |
| |
| /* Book3E does not support soft-masking PMI interrupts */ |
| if (IS_ENABLED(CONFIG_PPC_BOOK3S) && (local_paca->irq_happened & PACA_IRQ_PMI)) { |
| local_paca->irq_happened &= ~PACA_IRQ_PMI; |
| regs.trap = INTERRUPT_PERFMON; |
| performance_monitor_exception(®s); |
| if (!(local_paca->irq_happened & PACA_IRQ_HARD_DIS)) |
| hard_irq_disable(); |
| } |
| |
| if (local_paca->irq_happened & ~PACA_IRQ_HARD_DIS) { |
| /* |
| * We are responding to the next interrupt, so interrupt-off |
| * latencies should be reset here. |
| */ |
| trace_hardirqs_on(); |
| trace_hardirqs_off(); |
| goto again; |
| } |
| } |
| |
| #if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_KUAP) |
| static inline void replay_soft_interrupts_irqrestore(void) |
| { |
| unsigned long kuap_state = get_kuap(); |
| |
| /* |
| * Check if anything calls local_irq_enable/restore() when KUAP is |
| * disabled (user access enabled). We handle that case here by saving |
| * and re-locking AMR but we shouldn't get here in the first place, |
| * hence the warning. |
| */ |
| kuap_assert_locked(); |
| |
| if (kuap_state != AMR_KUAP_BLOCKED) |
| set_kuap(AMR_KUAP_BLOCKED); |
| |
| replay_soft_interrupts(); |
| |
| if (kuap_state != AMR_KUAP_BLOCKED) |
| set_kuap(kuap_state); |
| } |
| #else |
| #define replay_soft_interrupts_irqrestore() replay_soft_interrupts() |
| #endif |
| |
| #ifdef CONFIG_CC_HAS_ASM_GOTO |
| notrace void arch_local_irq_restore(unsigned long mask) |
| { |
| unsigned char irq_happened; |
| |
| /* Write the new soft-enabled value if it is a disable */ |
| if (mask) { |
| irq_soft_mask_set(mask); |
| return; |
| } |
| |
| /* |
| * After the stb, interrupts are unmasked and there are no interrupts |
| * pending replay. The restart sequence makes this atomic with |
| * respect to soft-masked interrupts. If this was just a simple code |
| * sequence, a soft-masked interrupt could become pending right after |
| * the comparison and before the stb. |
| * |
| * This allows interrupts to be unmasked without hard disabling, and |
| * also without new hard interrupts coming in ahead of pending ones. |
| */ |
| asm_volatile_goto( |
| "1: \n" |
| " lbz 9,%0(13) \n" |
| " cmpwi 9,0 \n" |
| " bne %l[happened] \n" |
| " stb 9,%1(13) \n" |
| "2: \n" |
| RESTART_TABLE(1b, 2b, 1b) |
| : : "i" (offsetof(struct paca_struct, irq_happened)), |
| "i" (offsetof(struct paca_struct, irq_soft_mask)) |
| : "cr0", "r9" |
| : happened); |
| |
| if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) |
| WARN_ON_ONCE(!(mfmsr() & MSR_EE)); |
| |
| return; |
| |
| happened: |
| irq_happened = get_irq_happened(); |
| if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) |
| WARN_ON_ONCE(!irq_happened); |
| |
| if (irq_happened == PACA_IRQ_HARD_DIS) { |
| if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) |
| WARN_ON_ONCE(mfmsr() & MSR_EE); |
| irq_soft_mask_set(IRQS_ENABLED); |
| local_paca->irq_happened = 0; |
| __hard_irq_enable(); |
| return; |
| } |
| |
| /* Have interrupts to replay, need to hard disable first */ |
| if (!(irq_happened & PACA_IRQ_HARD_DIS)) { |
| if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) { |
| if (!(mfmsr() & MSR_EE)) { |
| /* |
| * An interrupt could have come in and cleared |
| * MSR[EE] and set IRQ_HARD_DIS, so check |
| * IRQ_HARD_DIS again and warn if it is still |
| * clear. |
| */ |
| irq_happened = get_irq_happened(); |
| WARN_ON_ONCE(!(irq_happened & PACA_IRQ_HARD_DIS)); |
| } |
| } |
| __hard_irq_disable(); |
| local_paca->irq_happened |= PACA_IRQ_HARD_DIS; |
| } else { |
| if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) { |
| if (WARN_ON_ONCE(mfmsr() & MSR_EE)) |
| __hard_irq_disable(); |
| } |
| } |
| |
| /* |
| * Disable preempt here, so that the below preempt_enable will |
| * perform resched if required (a replayed interrupt may set |
| * need_resched). |
| */ |
| preempt_disable(); |
| irq_soft_mask_set(IRQS_ALL_DISABLED); |
| trace_hardirqs_off(); |
| |
| replay_soft_interrupts_irqrestore(); |
| local_paca->irq_happened = 0; |
| |
| trace_hardirqs_on(); |
| irq_soft_mask_set(IRQS_ENABLED); |
| __hard_irq_enable(); |
| preempt_enable(); |
| } |
| #else |
| notrace void arch_local_irq_restore(unsigned long mask) |
| { |
| unsigned char irq_happened; |
| |
| /* Write the new soft-enabled value */ |
| irq_soft_mask_set(mask); |
| if (mask) |
| return; |
| |
| /* |
| * From this point onward, we can take interrupts, preempt, |
| * etc... unless we got hard-disabled. We check if an event |
| * happened. If none happened, we know we can just return. |
| * |
| * We may have preempted before the check below, in which case |
| * we are checking the "new" CPU instead of the old one. This |
| * is only a problem if an event happened on the "old" CPU. |
| * |
| * External interrupt events will have caused interrupts to |
| * be hard-disabled, so there is no problem, we |
| * cannot have preempted. |
| */ |
| irq_happened = get_irq_happened(); |
| if (!irq_happened) { |
| if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) |
| WARN_ON_ONCE(!(mfmsr() & MSR_EE)); |
| return; |
| } |
| |
| /* We need to hard disable to replay. */ |
| if (!(irq_happened & PACA_IRQ_HARD_DIS)) { |
| if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) |
| WARN_ON_ONCE(!(mfmsr() & MSR_EE)); |
| __hard_irq_disable(); |
| local_paca->irq_happened |= PACA_IRQ_HARD_DIS; |
| } else { |
| /* |
| * We should already be hard disabled here. We had bugs |
| * where that wasn't the case so let's dbl check it and |
| * warn if we are wrong. Only do that when IRQ tracing |
| * is enabled as mfmsr() can be costly. |
| */ |
| if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) { |
| if (WARN_ON_ONCE(mfmsr() & MSR_EE)) |
| __hard_irq_disable(); |
| } |
| |
| if (irq_happened == PACA_IRQ_HARD_DIS) { |
| local_paca->irq_happened = 0; |
| __hard_irq_enable(); |
| return; |
| } |
| } |
| |
| /* |
| * Disable preempt here, so that the below preempt_enable will |
| * perform resched if required (a replayed interrupt may set |
| * need_resched). |
| */ |
| preempt_disable(); |
| irq_soft_mask_set(IRQS_ALL_DISABLED); |
| trace_hardirqs_off(); |
| |
| replay_soft_interrupts_irqrestore(); |
| local_paca->irq_happened = 0; |
| |
| trace_hardirqs_on(); |
| irq_soft_mask_set(IRQS_ENABLED); |
| __hard_irq_enable(); |
| preempt_enable(); |
| } |
| #endif |
| EXPORT_SYMBOL(arch_local_irq_restore); |
| |
| /* |
| * This is a helper to use when about to go into idle low-power |
| * when the latter has the side effect of re-enabling interrupts |
| * (such as calling H_CEDE under pHyp). |
| * |
| * You call this function with interrupts soft-disabled (this is |
| * already the case when ppc_md.power_save is called). The function |
| * will return whether to enter power save or just return. |
| * |
| * In the former case, it will have notified lockdep of interrupts |
| * being re-enabled and generally sanitized the lazy irq state, |
| * and in the latter case it will leave with interrupts hard |
| * disabled and marked as such, so the local_irq_enable() call |
| * in arch_cpu_idle() will properly re-enable everything. |
| */ |
| bool prep_irq_for_idle(void) |
| { |
| /* |
| * First we need to hard disable to ensure no interrupt |
| * occurs before we effectively enter the low power state |
| */ |
| __hard_irq_disable(); |
| local_paca->irq_happened |= PACA_IRQ_HARD_DIS; |
| |
| /* |
| * If anything happened while we were soft-disabled, |
| * we return now and do not enter the low power state. |
| */ |
| if (lazy_irq_pending()) |
| return false; |
| |
| /* Tell lockdep we are about to re-enable */ |
| trace_hardirqs_on(); |
| |
| /* |
| * Mark interrupts as soft-enabled and clear the |
| * PACA_IRQ_HARD_DIS from the pending mask since we |
| * are about to hard enable as well as a side effect |
| * of entering the low power state. |
| */ |
| local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS; |
| irq_soft_mask_set(IRQS_ENABLED); |
| |
| /* Tell the caller to enter the low power state */ |
| return true; |
| } |
| |
| #ifdef CONFIG_PPC_BOOK3S |
| /* |
| * This is for idle sequences that return with IRQs off, but the |
| * idle state itself wakes on interrupt. Tell the irq tracer that |
| * IRQs are enabled for the duration of idle so it does not get long |
| * off times. Must be paired with fini_irq_for_idle_irqsoff. |
| */ |
| bool prep_irq_for_idle_irqsoff(void) |
| { |
| WARN_ON(!irqs_disabled()); |
| |
| /* |
| * First we need to hard disable to ensure no interrupt |
| * occurs before we effectively enter the low power state |
| */ |
| __hard_irq_disable(); |
| local_paca->irq_happened |= PACA_IRQ_HARD_DIS; |
| |
| /* |
| * If anything happened while we were soft-disabled, |
| * we return now and do not enter the low power state. |
| */ |
| if (lazy_irq_pending()) |
| return false; |
| |
| /* Tell lockdep we are about to re-enable */ |
| trace_hardirqs_on(); |
| |
| return true; |
| } |
| |
| /* |
| * Take the SRR1 wakeup reason, index into this table to find the |
| * appropriate irq_happened bit. |
| * |
| * Sytem reset exceptions taken in idle state also come through here, |
| * but they are NMI interrupts so do not need to wait for IRQs to be |
| * restored, and should be taken as early as practical. These are marked |
| * with 0xff in the table. The Power ISA specifies 0100b as the system |
| * reset interrupt reason. |
| */ |
| #define IRQ_SYSTEM_RESET 0xff |
| |
| static const u8 srr1_to_lazyirq[0x10] = { |
| 0, 0, 0, |
| PACA_IRQ_DBELL, |
| IRQ_SYSTEM_RESET, |
| PACA_IRQ_DBELL, |
| PACA_IRQ_DEC, |
| 0, |
| PACA_IRQ_EE, |
| PACA_IRQ_EE, |
| PACA_IRQ_HMI, |
| 0, 0, 0, 0, 0 }; |
| |
| void replay_system_reset(void) |
| { |
| struct pt_regs regs; |
| |
| ppc_save_regs(®s); |
| regs.trap = 0x100; |
| get_paca()->in_nmi = 1; |
| system_reset_exception(®s); |
| get_paca()->in_nmi = 0; |
| } |
| EXPORT_SYMBOL_GPL(replay_system_reset); |
| |
| void irq_set_pending_from_srr1(unsigned long srr1) |
| { |
| unsigned int idx = (srr1 & SRR1_WAKEMASK_P8) >> 18; |
| u8 reason = srr1_to_lazyirq[idx]; |
| |
| /* |
| * Take the system reset now, which is immediately after registers |
| * are restored from idle. It's an NMI, so interrupts need not be |
| * re-enabled before it is taken. |
| */ |
| if (unlikely(reason == IRQ_SYSTEM_RESET)) { |
| replay_system_reset(); |
| return; |
| } |
| |
| if (reason == PACA_IRQ_DBELL) { |
| /* |
| * When doorbell triggers a system reset wakeup, the message |
| * is not cleared, so if the doorbell interrupt is replayed |
| * and the IPI handled, the doorbell interrupt would still |
| * fire when EE is enabled. |
| * |
| * To avoid taking the superfluous doorbell interrupt, |
| * execute a msgclr here before the interrupt is replayed. |
| */ |
| ppc_msgclr(PPC_DBELL_MSGTYPE); |
| } |
| |
| /* |
| * The 0 index (SRR1[42:45]=b0000) must always evaluate to 0, |
| * so this can be called unconditionally with the SRR1 wake |
| * reason as returned by the idle code, which uses 0 to mean no |
| * interrupt. |
| * |
| * If a future CPU was to designate this as an interrupt reason, |
| * then a new index for no interrupt must be assigned. |
| */ |
| local_paca->irq_happened |= reason; |
| } |
| #endif /* CONFIG_PPC_BOOK3S */ |
| |
| /* |
| * Force a replay of the external interrupt handler on this CPU. |
| */ |
| void force_external_irq_replay(void) |
| { |
| /* |
| * This must only be called with interrupts soft-disabled, |
| * the replay will happen when re-enabling. |
| */ |
| WARN_ON(!arch_irqs_disabled()); |
| |
| /* |
| * Interrupts must always be hard disabled before irq_happened is |
| * modified (to prevent lost update in case of interrupt between |
| * load and store). |
| */ |
| __hard_irq_disable(); |
| local_paca->irq_happened |= PACA_IRQ_HARD_DIS; |
| |
| /* Indicate in the PACA that we have an interrupt to replay */ |
| local_paca->irq_happened |= PACA_IRQ_EE; |
| } |
| |
| #endif /* CONFIG_PPC64 */ |
| |
| int arch_show_interrupts(struct seq_file *p, int prec) |
| { |
| int j; |
| |
| #if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT) |
| if (tau_initialized) { |
| seq_printf(p, "%*s: ", prec, "TAU"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", tau_interrupts(j)); |
| seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); |
| } |
| #endif /* CONFIG_PPC32 && CONFIG_TAU_INT */ |
| |
| seq_printf(p, "%*s: ", prec, "LOC"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).timer_irqs_event); |
| seq_printf(p, " Local timer interrupts for timer event device\n"); |
| |
| seq_printf(p, "%*s: ", prec, "BCT"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).broadcast_irqs_event); |
| seq_printf(p, " Broadcast timer interrupts for timer event device\n"); |
| |
| seq_printf(p, "%*s: ", prec, "LOC"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).timer_irqs_others); |
| seq_printf(p, " Local timer interrupts for others\n"); |
| |
| seq_printf(p, "%*s: ", prec, "SPU"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).spurious_irqs); |
| seq_printf(p, " Spurious interrupts\n"); |
| |
| seq_printf(p, "%*s: ", prec, "PMI"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).pmu_irqs); |
| seq_printf(p, " Performance monitoring interrupts\n"); |
| |
| seq_printf(p, "%*s: ", prec, "MCE"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).mce_exceptions); |
| seq_printf(p, " Machine check exceptions\n"); |
| |
| #ifdef CONFIG_PPC_BOOK3S_64 |
| if (cpu_has_feature(CPU_FTR_HVMODE)) { |
| seq_printf(p, "%*s: ", prec, "HMI"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", paca_ptrs[j]->hmi_irqs); |
| seq_printf(p, " Hypervisor Maintenance Interrupts\n"); |
| } |
| #endif |
| |
| seq_printf(p, "%*s: ", prec, "NMI"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).sreset_irqs); |
| seq_printf(p, " System Reset interrupts\n"); |
| |
| #ifdef CONFIG_PPC_WATCHDOG |
| seq_printf(p, "%*s: ", prec, "WDG"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).soft_nmi_irqs); |
| seq_printf(p, " Watchdog soft-NMI interrupts\n"); |
| #endif |
| |
| #ifdef CONFIG_PPC_DOORBELL |
| if (cpu_has_feature(CPU_FTR_DBELL)) { |
| seq_printf(p, "%*s: ", prec, "DBL"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).doorbell_irqs); |
| seq_printf(p, " Doorbell interrupts\n"); |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| /* |
| * /proc/stat helpers |
| */ |
| u64 arch_irq_stat_cpu(unsigned int cpu) |
| { |
| u64 sum = per_cpu(irq_stat, cpu).timer_irqs_event; |
| |
| sum += per_cpu(irq_stat, cpu).broadcast_irqs_event; |
| sum += per_cpu(irq_stat, cpu).pmu_irqs; |
| sum += per_cpu(irq_stat, cpu).mce_exceptions; |
| sum += per_cpu(irq_stat, cpu).spurious_irqs; |
| sum += per_cpu(irq_stat, cpu).timer_irqs_others; |
| #ifdef CONFIG_PPC_BOOK3S_64 |
| sum += paca_ptrs[cpu]->hmi_irqs; |
| #endif |
| sum += per_cpu(irq_stat, cpu).sreset_irqs; |
| #ifdef CONFIG_PPC_WATCHDOG |
| sum += per_cpu(irq_stat, cpu).soft_nmi_irqs; |
| #endif |
| #ifdef CONFIG_PPC_DOORBELL |
| sum += per_cpu(irq_stat, cpu).doorbell_irqs; |
| #endif |
| |
| return sum; |
| } |
| |
| static inline void check_stack_overflow(void) |
| { |
| long sp; |
| |
| if (!IS_ENABLED(CONFIG_DEBUG_STACKOVERFLOW)) |
| return; |
| |
| sp = current_stack_pointer & (THREAD_SIZE - 1); |
| |
| /* check for stack overflow: is there less than 2KB free? */ |
| if (unlikely(sp < 2048)) { |
| pr_err("do_IRQ: stack overflow: %ld\n", sp); |
| dump_stack(); |
| } |
| } |
| |
| static __always_inline void call_do_softirq(const void *sp) |
| { |
| /* Temporarily switch r1 to sp, call __do_softirq() then restore r1. */ |
| asm volatile ( |
| PPC_STLU " %%r1, %[offset](%[sp]) ;" |
| "mr %%r1, %[sp] ;" |
| "bl %[callee] ;" |
| PPC_LL " %%r1, 0(%%r1) ;" |
| : // Outputs |
| : // Inputs |
| [sp] "b" (sp), [offset] "i" (THREAD_SIZE - STACK_FRAME_OVERHEAD), |
| [callee] "i" (__do_softirq) |
| : // Clobbers |
| "lr", "xer", "ctr", "memory", "cr0", "cr1", "cr5", "cr6", |
| "cr7", "r0", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", |
| "r11", "r12" |
| ); |
| } |
| |
| static __always_inline void call_do_irq(struct pt_regs *regs, void *sp) |
| { |
| register unsigned long r3 asm("r3") = (unsigned long)regs; |
| |
| /* Temporarily switch r1 to sp, call __do_irq() then restore r1. */ |
| asm volatile ( |
| PPC_STLU " %%r1, %[offset](%[sp]) ;" |
| "mr %%r1, %[sp] ;" |
| "bl %[callee] ;" |
| PPC_LL " %%r1, 0(%%r1) ;" |
| : // Outputs |
| "+r" (r3) |
| : // Inputs |
| [sp] "b" (sp), [offset] "i" (THREAD_SIZE - STACK_FRAME_OVERHEAD), |
| [callee] "i" (__do_irq) |
| : // Clobbers |
| "lr", "xer", "ctr", "memory", "cr0", "cr1", "cr5", "cr6", |
| "cr7", "r0", "r4", "r5", "r6", "r7", "r8", "r9", "r10", |
| "r11", "r12" |
| ); |
| } |
| |
| void __do_irq(struct pt_regs *regs) |
| { |
| unsigned int irq; |
| |
| trace_irq_entry(regs); |
| |
| /* |
| * Query the platform PIC for the interrupt & ack it. |
| * |
| * This will typically lower the interrupt line to the CPU |
| */ |
| irq = ppc_md.get_irq(); |
| |
| /* We can hard enable interrupts now to allow perf interrupts */ |
| may_hard_irq_enable(); |
| |
| /* And finally process it */ |
| if (unlikely(!irq)) |
| __this_cpu_inc(irq_stat.spurious_irqs); |
| else |
| generic_handle_irq(irq); |
| |
| trace_irq_exit(regs); |
| } |
| |
| DEFINE_INTERRUPT_HANDLER_ASYNC(do_IRQ) |
| { |
| struct pt_regs *old_regs = set_irq_regs(regs); |
| void *cursp, *irqsp, *sirqsp; |
| |
| /* Switch to the irq stack to handle this */ |
| cursp = (void *)(current_stack_pointer & ~(THREAD_SIZE - 1)); |
| irqsp = hardirq_ctx[raw_smp_processor_id()]; |
| sirqsp = softirq_ctx[raw_smp_processor_id()]; |
| |
| check_stack_overflow(); |
| |
| /* Already there ? */ |
| if (unlikely(cursp == irqsp || cursp == sirqsp)) { |
| __do_irq(regs); |
| set_irq_regs(old_regs); |
| return; |
| } |
| /* Switch stack and call */ |
| call_do_irq(regs, irqsp); |
| |
| set_irq_regs(old_regs); |
| } |
| |
| static void *__init alloc_vm_stack(void) |
| { |
| return __vmalloc_node(THREAD_SIZE, THREAD_ALIGN, THREADINFO_GFP, |
| NUMA_NO_NODE, (void *)_RET_IP_); |
| } |
| |
| static void __init vmap_irqstack_init(void) |
| { |
| int i; |
| |
| for_each_possible_cpu(i) { |
| softirq_ctx[i] = alloc_vm_stack(); |
| hardirq_ctx[i] = alloc_vm_stack(); |
| } |
| } |
| |
| |
| void __init init_IRQ(void) |
| { |
| if (IS_ENABLED(CONFIG_VMAP_STACK)) |
| vmap_irqstack_init(); |
| |
| if (ppc_md.init_IRQ) |
| ppc_md.init_IRQ(); |
| } |
| |
| #if defined(CONFIG_BOOKE) || defined(CONFIG_40x) |
| void *critirq_ctx[NR_CPUS] __read_mostly; |
| void *dbgirq_ctx[NR_CPUS] __read_mostly; |
| void *mcheckirq_ctx[NR_CPUS] __read_mostly; |
| #endif |
| |
| void *softirq_ctx[NR_CPUS] __read_mostly; |
| void *hardirq_ctx[NR_CPUS] __read_mostly; |
| |
| void do_softirq_own_stack(void) |
| { |
| call_do_softirq(softirq_ctx[smp_processor_id()]); |
| } |
| |
| irq_hw_number_t virq_to_hw(unsigned int virq) |
| { |
| struct irq_data *irq_data = irq_get_irq_data(virq); |
| return WARN_ON(!irq_data) ? 0 : irq_data->hwirq; |
| } |
| EXPORT_SYMBOL_GPL(virq_to_hw); |
| |
| #ifdef CONFIG_SMP |
| int irq_choose_cpu(const struct cpumask *mask) |
| { |
| int cpuid; |
| |
| if (cpumask_equal(mask, cpu_online_mask)) { |
| static int irq_rover; |
| static DEFINE_RAW_SPINLOCK(irq_rover_lock); |
| unsigned long flags; |
| |
| /* Round-robin distribution... */ |
| do_round_robin: |
| raw_spin_lock_irqsave(&irq_rover_lock, flags); |
| |
| irq_rover = cpumask_next(irq_rover, cpu_online_mask); |
| if (irq_rover >= nr_cpu_ids) |
| irq_rover = cpumask_first(cpu_online_mask); |
| |
| cpuid = irq_rover; |
| |
| raw_spin_unlock_irqrestore(&irq_rover_lock, flags); |
| } else { |
| cpuid = cpumask_first_and(mask, cpu_online_mask); |
| if (cpuid >= nr_cpu_ids) |
| goto do_round_robin; |
| } |
| |
| return get_hard_smp_processor_id(cpuid); |
| } |
| #else |
| int irq_choose_cpu(const struct cpumask *mask) |
| { |
| return hard_smp_processor_id(); |
| } |
| #endif |
| |
| #ifdef CONFIG_PPC64 |
| static int __init setup_noirqdistrib(char *str) |
| { |
| distribute_irqs = 0; |
| return 1; |
| } |
| |
| __setup("noirqdistrib", setup_noirqdistrib); |
| #endif /* CONFIG_PPC64 */ |