| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * STM32 Low-Power Timer PWM driver |
| * |
| * Copyright (C) STMicroelectronics 2017 |
| * |
| * Author: Gerald Baeza <gerald.baeza@st.com> |
| * |
| * Inspired by Gerald Baeza's pwm-stm32 driver |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/mfd/stm32-lptimer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| |
| struct stm32_pwm_lp { |
| struct pwm_chip chip; |
| struct clk *clk; |
| struct regmap *regmap; |
| }; |
| |
| static inline struct stm32_pwm_lp *to_stm32_pwm_lp(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct stm32_pwm_lp, chip); |
| } |
| |
| /* STM32 Low-Power Timer is preceded by a configurable power-of-2 prescaler */ |
| #define STM32_LPTIM_MAX_PRESCALER 128 |
| |
| static int stm32_pwm_lp_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
| const struct pwm_state *state) |
| { |
| struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip); |
| unsigned long long prd, div, dty; |
| struct pwm_state cstate; |
| u32 val, mask, cfgr, presc = 0; |
| bool reenable; |
| int ret; |
| |
| pwm_get_state(pwm, &cstate); |
| reenable = !cstate.enabled; |
| |
| if (!state->enabled) { |
| if (cstate.enabled) { |
| /* Disable LP timer */ |
| ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0); |
| if (ret) |
| return ret; |
| /* disable clock to PWM counter */ |
| clk_disable(priv->clk); |
| } |
| return 0; |
| } |
| |
| /* Calculate the period and prescaler value */ |
| div = (unsigned long long)clk_get_rate(priv->clk) * state->period; |
| do_div(div, NSEC_PER_SEC); |
| if (!div) { |
| /* Clock is too slow to achieve requested period. */ |
| dev_dbg(priv->chip.dev, "Can't reach %llu ns\n", state->period); |
| return -EINVAL; |
| } |
| |
| prd = div; |
| while (div > STM32_LPTIM_MAX_ARR) { |
| presc++; |
| if ((1 << presc) > STM32_LPTIM_MAX_PRESCALER) { |
| dev_err(priv->chip.dev, "max prescaler exceeded\n"); |
| return -EINVAL; |
| } |
| div = prd >> presc; |
| } |
| prd = div; |
| |
| /* Calculate the duty cycle */ |
| dty = prd * state->duty_cycle; |
| do_div(dty, state->period); |
| |
| if (!cstate.enabled) { |
| /* enable clock to drive PWM counter */ |
| ret = clk_enable(priv->clk); |
| if (ret) |
| return ret; |
| } |
| |
| ret = regmap_read(priv->regmap, STM32_LPTIM_CFGR, &cfgr); |
| if (ret) |
| goto err; |
| |
| if ((FIELD_GET(STM32_LPTIM_PRESC, cfgr) != presc) || |
| (FIELD_GET(STM32_LPTIM_WAVPOL, cfgr) != state->polarity)) { |
| val = FIELD_PREP(STM32_LPTIM_PRESC, presc); |
| val |= FIELD_PREP(STM32_LPTIM_WAVPOL, state->polarity); |
| mask = STM32_LPTIM_PRESC | STM32_LPTIM_WAVPOL; |
| |
| /* Must disable LP timer to modify CFGR */ |
| reenable = true; |
| ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0); |
| if (ret) |
| goto err; |
| |
| ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask, |
| val); |
| if (ret) |
| goto err; |
| } |
| |
| if (reenable) { |
| /* Must (re)enable LP timer to modify CMP & ARR */ |
| ret = regmap_write(priv->regmap, STM32_LPTIM_CR, |
| STM32_LPTIM_ENABLE); |
| if (ret) |
| goto err; |
| } |
| |
| ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, prd - 1); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, prd - (1 + dty)); |
| if (ret) |
| goto err; |
| |
| /* ensure CMP & ARR registers are properly written */ |
| ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val, |
| (val & STM32_LPTIM_CMPOK_ARROK), |
| 100, 1000); |
| if (ret) { |
| dev_err(priv->chip.dev, "ARR/CMP registers write issue\n"); |
| goto err; |
| } |
| ret = regmap_write(priv->regmap, STM32_LPTIM_ICR, |
| STM32_LPTIM_CMPOKCF_ARROKCF); |
| if (ret) |
| goto err; |
| |
| if (reenable) { |
| /* Start LP timer in continuous mode */ |
| ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CR, |
| STM32_LPTIM_CNTSTRT, |
| STM32_LPTIM_CNTSTRT); |
| if (ret) { |
| regmap_write(priv->regmap, STM32_LPTIM_CR, 0); |
| goto err; |
| } |
| } |
| |
| return 0; |
| err: |
| if (!cstate.enabled) |
| clk_disable(priv->clk); |
| |
| return ret; |
| } |
| |
| static void stm32_pwm_lp_get_state(struct pwm_chip *chip, |
| struct pwm_device *pwm, |
| struct pwm_state *state) |
| { |
| struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip); |
| unsigned long rate = clk_get_rate(priv->clk); |
| u32 val, presc, prd; |
| u64 tmp; |
| |
| regmap_read(priv->regmap, STM32_LPTIM_CR, &val); |
| state->enabled = !!FIELD_GET(STM32_LPTIM_ENABLE, val); |
| /* Keep PWM counter clock refcount in sync with PWM initial state */ |
| if (state->enabled) |
| clk_enable(priv->clk); |
| |
| regmap_read(priv->regmap, STM32_LPTIM_CFGR, &val); |
| presc = FIELD_GET(STM32_LPTIM_PRESC, val); |
| state->polarity = FIELD_GET(STM32_LPTIM_WAVPOL, val); |
| |
| regmap_read(priv->regmap, STM32_LPTIM_ARR, &prd); |
| tmp = prd + 1; |
| tmp = (tmp << presc) * NSEC_PER_SEC; |
| state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate); |
| |
| regmap_read(priv->regmap, STM32_LPTIM_CMP, &val); |
| tmp = prd - val; |
| tmp = (tmp << presc) * NSEC_PER_SEC; |
| state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate); |
| } |
| |
| static const struct pwm_ops stm32_pwm_lp_ops = { |
| .owner = THIS_MODULE, |
| .apply = stm32_pwm_lp_apply, |
| .get_state = stm32_pwm_lp_get_state, |
| }; |
| |
| static int stm32_pwm_lp_probe(struct platform_device *pdev) |
| { |
| struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent); |
| struct stm32_pwm_lp *priv; |
| int ret; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->regmap = ddata->regmap; |
| priv->clk = ddata->clk; |
| priv->chip.dev = &pdev->dev; |
| priv->chip.ops = &stm32_pwm_lp_ops; |
| priv->chip.npwm = 1; |
| |
| ret = pwmchip_add(&priv->chip); |
| if (ret < 0) |
| return ret; |
| |
| platform_set_drvdata(pdev, priv); |
| |
| return 0; |
| } |
| |
| static int stm32_pwm_lp_remove(struct platform_device *pdev) |
| { |
| struct stm32_pwm_lp *priv = platform_get_drvdata(pdev); |
| |
| pwm_disable(&priv->chip.pwms[0]); |
| |
| return pwmchip_remove(&priv->chip); |
| } |
| |
| static int __maybe_unused stm32_pwm_lp_suspend(struct device *dev) |
| { |
| struct stm32_pwm_lp *priv = dev_get_drvdata(dev); |
| struct pwm_state state; |
| |
| pwm_get_state(&priv->chip.pwms[0], &state); |
| if (state.enabled) { |
| dev_err(dev, "The consumer didn't stop us (%s)\n", |
| priv->chip.pwms[0].label); |
| return -EBUSY; |
| } |
| |
| return pinctrl_pm_select_sleep_state(dev); |
| } |
| |
| static int __maybe_unused stm32_pwm_lp_resume(struct device *dev) |
| { |
| return pinctrl_pm_select_default_state(dev); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(stm32_pwm_lp_pm_ops, stm32_pwm_lp_suspend, |
| stm32_pwm_lp_resume); |
| |
| static const struct of_device_id stm32_pwm_lp_of_match[] = { |
| { .compatible = "st,stm32-pwm-lp", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, stm32_pwm_lp_of_match); |
| |
| static struct platform_driver stm32_pwm_lp_driver = { |
| .probe = stm32_pwm_lp_probe, |
| .remove = stm32_pwm_lp_remove, |
| .driver = { |
| .name = "stm32-pwm-lp", |
| .of_match_table = of_match_ptr(stm32_pwm_lp_of_match), |
| .pm = &stm32_pwm_lp_pm_ops, |
| }, |
| }; |
| module_platform_driver(stm32_pwm_lp_driver); |
| |
| MODULE_ALIAS("platform:stm32-pwm-lp"); |
| MODULE_DESCRIPTION("STMicroelectronics STM32 PWM LP driver"); |
| MODULE_LICENSE("GPL v2"); |