| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * processor_thermal_device.c |
| * Copyright (c) 2014, Intel Corporation. |
| */ |
| #include <linux/acpi.h> |
| #include <linux/intel_tcc.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/thermal.h> |
| #include "int340x_thermal_zone.h" |
| #include "processor_thermal_device.h" |
| #include "../intel_soc_dts_iosf.h" |
| |
| #define DRV_NAME "proc_thermal" |
| |
| #define POWER_LIMIT_SHOW(index, suffix) \ |
| static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \ |
| struct device_attribute *attr, \ |
| char *buf) \ |
| { \ |
| struct proc_thermal_device *proc_dev = dev_get_drvdata(dev); \ |
| \ |
| return sprintf(buf, "%lu\n",\ |
| (unsigned long)proc_dev->power_limits[index].suffix * 1000); \ |
| } |
| |
| static ssize_t power_floor_status_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct proc_thermal_device *proc_dev = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = proc_thermal_read_power_floor_status(proc_dev); |
| |
| return sysfs_emit(buf, "%d\n", ret); |
| } |
| |
| static ssize_t power_floor_enable_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct proc_thermal_device *proc_dev = dev_get_drvdata(dev); |
| bool ret; |
| |
| ret = proc_thermal_power_floor_get_state(proc_dev); |
| |
| return sysfs_emit(buf, "%d\n", ret); |
| } |
| |
| static ssize_t power_floor_enable_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct proc_thermal_device *proc_dev = dev_get_drvdata(dev); |
| u8 state; |
| int ret; |
| |
| if (kstrtou8(buf, 0, &state)) |
| return -EINVAL; |
| |
| ret = proc_thermal_power_floor_set_state(proc_dev, !!state); |
| if (ret) |
| return ret; |
| |
| return count; |
| } |
| |
| POWER_LIMIT_SHOW(0, min_uw) |
| POWER_LIMIT_SHOW(0, max_uw) |
| POWER_LIMIT_SHOW(0, step_uw) |
| POWER_LIMIT_SHOW(0, tmin_us) |
| POWER_LIMIT_SHOW(0, tmax_us) |
| |
| POWER_LIMIT_SHOW(1, min_uw) |
| POWER_LIMIT_SHOW(1, max_uw) |
| POWER_LIMIT_SHOW(1, step_uw) |
| POWER_LIMIT_SHOW(1, tmin_us) |
| POWER_LIMIT_SHOW(1, tmax_us) |
| |
| static DEVICE_ATTR_RO(power_limit_0_min_uw); |
| static DEVICE_ATTR_RO(power_limit_0_max_uw); |
| static DEVICE_ATTR_RO(power_limit_0_step_uw); |
| static DEVICE_ATTR_RO(power_limit_0_tmin_us); |
| static DEVICE_ATTR_RO(power_limit_0_tmax_us); |
| |
| static DEVICE_ATTR_RO(power_limit_1_min_uw); |
| static DEVICE_ATTR_RO(power_limit_1_max_uw); |
| static DEVICE_ATTR_RO(power_limit_1_step_uw); |
| static DEVICE_ATTR_RO(power_limit_1_tmin_us); |
| static DEVICE_ATTR_RO(power_limit_1_tmax_us); |
| |
| static DEVICE_ATTR_RO(power_floor_status); |
| static DEVICE_ATTR_RW(power_floor_enable); |
| |
| static struct attribute *power_limit_attrs[] = { |
| &dev_attr_power_limit_0_min_uw.attr, |
| &dev_attr_power_limit_1_min_uw.attr, |
| &dev_attr_power_limit_0_max_uw.attr, |
| &dev_attr_power_limit_1_max_uw.attr, |
| &dev_attr_power_limit_0_step_uw.attr, |
| &dev_attr_power_limit_1_step_uw.attr, |
| &dev_attr_power_limit_0_tmin_us.attr, |
| &dev_attr_power_limit_1_tmin_us.attr, |
| &dev_attr_power_limit_0_tmax_us.attr, |
| &dev_attr_power_limit_1_tmax_us.attr, |
| &dev_attr_power_floor_status.attr, |
| &dev_attr_power_floor_enable.attr, |
| NULL |
| }; |
| |
| static umode_t power_limit_attr_visible(struct kobject *kobj, struct attribute *attr, int unused) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct proc_thermal_device *proc_dev; |
| |
| if (attr != &dev_attr_power_floor_status.attr && attr != &dev_attr_power_floor_enable.attr) |
| return attr->mode; |
| |
| proc_dev = dev_get_drvdata(dev); |
| if (!proc_dev || !(proc_dev->mmio_feature_mask & PROC_THERMAL_FEATURE_POWER_FLOOR)) |
| return 0; |
| |
| return attr->mode; |
| } |
| |
| static const struct attribute_group power_limit_attribute_group = { |
| .attrs = power_limit_attrs, |
| .name = "power_limits", |
| .is_visible = power_limit_attr_visible, |
| }; |
| |
| static ssize_t tcc_offset_degree_celsius_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| int offset; |
| |
| offset = intel_tcc_get_offset(-1); |
| if (offset < 0) |
| return offset; |
| |
| return sprintf(buf, "%d\n", offset); |
| } |
| |
| static ssize_t tcc_offset_degree_celsius_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| unsigned int tcc; |
| u64 val; |
| int err; |
| |
| err = rdmsrl_safe(MSR_PLATFORM_INFO, &val); |
| if (err) |
| return err; |
| |
| if (!(val & BIT(30))) |
| return -EACCES; |
| |
| if (kstrtouint(buf, 0, &tcc)) |
| return -EINVAL; |
| |
| err = intel_tcc_set_offset(-1, tcc); |
| if (err) |
| return err; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(tcc_offset_degree_celsius); |
| |
| static int proc_thermal_get_zone_temp(struct thermal_zone_device *zone, |
| int *temp) |
| { |
| int cpu; |
| int curr_temp, ret; |
| |
| *temp = 0; |
| |
| for_each_online_cpu(cpu) { |
| ret = intel_tcc_get_temp(cpu, &curr_temp, false); |
| if (ret < 0) |
| return ret; |
| if (!*temp || curr_temp > *temp) |
| *temp = curr_temp; |
| } |
| |
| *temp *= 1000; |
| |
| return 0; |
| } |
| |
| static int proc_thermal_read_ppcc(struct proc_thermal_device *proc_priv) |
| { |
| int i; |
| acpi_status status; |
| struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *elements, *ppcc; |
| union acpi_object *p; |
| int ret = 0; |
| |
| status = acpi_evaluate_object(proc_priv->adev->handle, "PPCC", |
| NULL, &buf); |
| if (ACPI_FAILURE(status)) |
| return -ENODEV; |
| |
| p = buf.pointer; |
| if (!p || (p->type != ACPI_TYPE_PACKAGE)) { |
| dev_err(proc_priv->dev, "Invalid PPCC data\n"); |
| ret = -EFAULT; |
| goto free_buffer; |
| } |
| |
| if (!p->package.count) { |
| dev_err(proc_priv->dev, "Invalid PPCC package size\n"); |
| ret = -EFAULT; |
| goto free_buffer; |
| } |
| |
| for (i = 0; i < min((int)p->package.count - 1, 2); ++i) { |
| elements = &(p->package.elements[i+1]); |
| if (elements->type != ACPI_TYPE_PACKAGE || |
| elements->package.count != 6) { |
| ret = -EFAULT; |
| goto free_buffer; |
| } |
| ppcc = elements->package.elements; |
| proc_priv->power_limits[i].index = ppcc[0].integer.value; |
| proc_priv->power_limits[i].min_uw = ppcc[1].integer.value; |
| proc_priv->power_limits[i].max_uw = ppcc[2].integer.value; |
| proc_priv->power_limits[i].tmin_us = ppcc[3].integer.value; |
| proc_priv->power_limits[i].tmax_us = ppcc[4].integer.value; |
| proc_priv->power_limits[i].step_uw = ppcc[5].integer.value; |
| } |
| |
| free_buffer: |
| kfree(buf.pointer); |
| |
| return ret; |
| } |
| |
| #define PROC_POWER_CAPABILITY_CHANGED 0x83 |
| static void proc_thermal_notify(acpi_handle handle, u32 event, void *data) |
| { |
| struct proc_thermal_device *proc_priv = data; |
| |
| if (!proc_priv) |
| return; |
| |
| switch (event) { |
| case PROC_POWER_CAPABILITY_CHANGED: |
| proc_thermal_read_ppcc(proc_priv); |
| int340x_thermal_zone_device_update(proc_priv->int340x_zone, |
| THERMAL_DEVICE_POWER_CAPABILITY_CHANGED); |
| break; |
| default: |
| dev_dbg(proc_priv->dev, "Unsupported event [0x%x]\n", event); |
| break; |
| } |
| } |
| |
| int proc_thermal_add(struct device *dev, struct proc_thermal_device *proc_priv) |
| { |
| struct acpi_device *adev; |
| acpi_status status; |
| unsigned long long tmp; |
| int (*get_temp) (struct thermal_zone_device *, int *) = NULL; |
| int ret; |
| |
| adev = ACPI_COMPANION(dev); |
| if (!adev) |
| return -ENODEV; |
| |
| proc_priv->dev = dev; |
| proc_priv->adev = adev; |
| |
| ret = proc_thermal_read_ppcc(proc_priv); |
| if (ret) |
| return ret; |
| |
| status = acpi_evaluate_integer(adev->handle, "_TMP", NULL, &tmp); |
| if (ACPI_FAILURE(status)) { |
| /* there is no _TMP method, add local method */ |
| if (intel_tcc_get_tjmax(-1) > 0) |
| get_temp = proc_thermal_get_zone_temp; |
| } |
| |
| proc_priv->int340x_zone = int340x_thermal_zone_add(adev, get_temp); |
| if (IS_ERR(proc_priv->int340x_zone)) { |
| return PTR_ERR(proc_priv->int340x_zone); |
| } else |
| ret = 0; |
| |
| ret = acpi_install_notify_handler(adev->handle, ACPI_DEVICE_NOTIFY, |
| proc_thermal_notify, |
| (void *)proc_priv); |
| if (ret) |
| goto remove_zone; |
| |
| ret = sysfs_create_file(&dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr); |
| if (ret) |
| goto remove_notify; |
| |
| ret = sysfs_create_group(&dev->kobj, &power_limit_attribute_group); |
| if (ret) { |
| sysfs_remove_file(&dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr); |
| goto remove_notify; |
| } |
| |
| return 0; |
| |
| remove_notify: |
| acpi_remove_notify_handler(adev->handle, |
| ACPI_DEVICE_NOTIFY, proc_thermal_notify); |
| remove_zone: |
| int340x_thermal_zone_remove(proc_priv->int340x_zone); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(proc_thermal_add); |
| |
| void proc_thermal_remove(struct proc_thermal_device *proc_priv) |
| { |
| acpi_remove_notify_handler(proc_priv->adev->handle, |
| ACPI_DEVICE_NOTIFY, proc_thermal_notify); |
| int340x_thermal_zone_remove(proc_priv->int340x_zone); |
| sysfs_remove_file(&proc_priv->dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr); |
| sysfs_remove_group(&proc_priv->dev->kobj, |
| &power_limit_attribute_group); |
| } |
| EXPORT_SYMBOL_GPL(proc_thermal_remove); |
| |
| static int tcc_offset_save = -1; |
| |
| int proc_thermal_suspend(struct device *dev) |
| { |
| tcc_offset_save = intel_tcc_get_offset(-1); |
| if (tcc_offset_save < 0) |
| dev_warn(dev, "failed to save offset (%d)\n", tcc_offset_save); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(proc_thermal_suspend); |
| |
| int proc_thermal_resume(struct device *dev) |
| { |
| struct proc_thermal_device *proc_dev; |
| |
| proc_dev = dev_get_drvdata(dev); |
| proc_thermal_read_ppcc(proc_dev); |
| |
| /* Do not update if saving failed */ |
| if (tcc_offset_save >= 0) |
| intel_tcc_set_offset(-1, tcc_offset_save); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(proc_thermal_resume); |
| |
| #define MCHBAR 0 |
| |
| static int proc_thermal_set_mmio_base(struct pci_dev *pdev, struct proc_thermal_device *proc_priv) |
| { |
| int ret; |
| |
| ret = pcim_iomap_regions(pdev, 1 << MCHBAR, DRV_NAME); |
| if (ret) { |
| dev_err(&pdev->dev, "cannot reserve PCI memory region\n"); |
| return -ENOMEM; |
| } |
| |
| proc_priv->mmio_base = pcim_iomap_table(pdev)[MCHBAR]; |
| |
| return 0; |
| } |
| |
| int proc_thermal_mmio_add(struct pci_dev *pdev, |
| struct proc_thermal_device *proc_priv, |
| kernel_ulong_t feature_mask) |
| { |
| int ret; |
| |
| proc_priv->mmio_feature_mask = feature_mask; |
| |
| if (feature_mask) { |
| ret = proc_thermal_set_mmio_base(pdev, proc_priv); |
| if (ret) |
| return ret; |
| } |
| |
| if (feature_mask & PROC_THERMAL_FEATURE_RAPL) { |
| ret = proc_thermal_rapl_add(pdev, proc_priv); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to add RAPL MMIO interface\n"); |
| return ret; |
| } |
| } |
| |
| if (feature_mask & PROC_THERMAL_FEATURE_FIVR || |
| feature_mask & PROC_THERMAL_FEATURE_DVFS || |
| feature_mask & PROC_THERMAL_FEATURE_DLVR) { |
| ret = proc_thermal_rfim_add(pdev, proc_priv); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to add RFIM interface\n"); |
| goto err_rem_rapl; |
| } |
| } |
| |
| if (feature_mask & PROC_THERMAL_FEATURE_WT_REQ) { |
| ret = proc_thermal_wt_req_add(pdev, proc_priv); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to add MBOX interface\n"); |
| goto err_rem_rfim; |
| } |
| } else if (feature_mask & PROC_THERMAL_FEATURE_WT_HINT) { |
| ret = proc_thermal_wt_hint_add(pdev, proc_priv); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to add WT Hint\n"); |
| goto err_rem_rfim; |
| } |
| } |
| |
| return 0; |
| |
| err_rem_rfim: |
| proc_thermal_rfim_remove(pdev); |
| err_rem_rapl: |
| proc_thermal_rapl_remove(); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(proc_thermal_mmio_add); |
| |
| void proc_thermal_mmio_remove(struct pci_dev *pdev, struct proc_thermal_device *proc_priv) |
| { |
| if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_RAPL) |
| proc_thermal_rapl_remove(); |
| |
| if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_FIVR || |
| proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DVFS) |
| proc_thermal_rfim_remove(pdev); |
| |
| if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_POWER_FLOOR) |
| proc_thermal_power_floor_set_state(proc_priv, false); |
| |
| if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_WT_REQ) |
| proc_thermal_wt_req_remove(pdev); |
| else if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_WT_HINT) |
| proc_thermal_wt_hint_remove(pdev); |
| } |
| EXPORT_SYMBOL_GPL(proc_thermal_mmio_remove); |
| |
| MODULE_IMPORT_NS(INTEL_TCC); |
| MODULE_IMPORT_NS(INT340X_THERMAL); |
| MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); |
| MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver"); |
| MODULE_LICENSE("GPL v2"); |