| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Generic System Framebuffers |
| * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com> |
| */ |
| |
| /* |
| * simple-framebuffer probing |
| * Try to convert "screen_info" into a "simple-framebuffer" compatible mode. |
| * If the mode is incompatible, we return "false" and let the caller create |
| * legacy nodes instead. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/platform_data/simplefb.h> |
| #include <linux/platform_device.h> |
| #include <linux/screen_info.h> |
| #include <linux/sysfb.h> |
| |
| static const char simplefb_resname[] = "BOOTFB"; |
| static const struct simplefb_format formats[] = SIMPLEFB_FORMATS; |
| |
| /* try parsing screen_info into a simple-framebuffer mode struct */ |
| __init bool sysfb_parse_mode(const struct screen_info *si, |
| struct simplefb_platform_data *mode) |
| { |
| __u8 type; |
| u32 bits_per_pixel; |
| unsigned int i; |
| |
| type = si->orig_video_isVGA; |
| if (type != VIDEO_TYPE_VLFB && type != VIDEO_TYPE_EFI) |
| return false; |
| |
| /* |
| * The meaning of depth and bpp for direct-color formats is |
| * inconsistent: |
| * |
| * - DRM format info specifies depth as the number of color |
| * bits; including alpha, but not including filler bits. |
| * - Linux' EFI platform code computes lfb_depth from the |
| * individual color channels, including the reserved bits. |
| * - VBE 1.1 defines lfb_depth for XRGB1555 as 16, but later |
| * versions use 15. |
| * - On the kernel command line, 'bpp' of 32 is usually |
| * XRGB8888 including the filler bits, but 15 is XRGB1555 |
| * not including the filler bit. |
| * |
| * It's not easily possible to fix this in struct screen_info, |
| * as this could break UAPI. The best solution is to compute |
| * bits_per_pixel here and ignore lfb_depth. In the loop below, |
| * ignore simplefb formats with alpha bits, as EFI and VESA |
| * don't specify alpha channels. |
| */ |
| if (si->lfb_depth > 8) { |
| bits_per_pixel = max(max3(si->red_size + si->red_pos, |
| si->green_size + si->green_pos, |
| si->blue_size + si->blue_pos), |
| si->rsvd_size + si->rsvd_pos); |
| } else { |
| bits_per_pixel = si->lfb_depth; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(formats); ++i) { |
| const struct simplefb_format *f = &formats[i]; |
| |
| if (f->transp.length) |
| continue; /* transparent formats are unsupported by VESA/EFI */ |
| |
| if (bits_per_pixel == f->bits_per_pixel && |
| si->red_size == f->red.length && |
| si->red_pos == f->red.offset && |
| si->green_size == f->green.length && |
| si->green_pos == f->green.offset && |
| si->blue_size == f->blue.length && |
| si->blue_pos == f->blue.offset) { |
| mode->format = f->name; |
| mode->width = si->lfb_width; |
| mode->height = si->lfb_height; |
| mode->stride = si->lfb_linelength; |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| __init struct platform_device *sysfb_create_simplefb(const struct screen_info *si, |
| const struct simplefb_platform_data *mode) |
| { |
| struct platform_device *pd; |
| struct resource res; |
| u64 base, size; |
| u32 length; |
| int ret; |
| |
| /* |
| * If the 64BIT_BASE capability is set, ext_lfb_base will contain the |
| * upper half of the base address. Assemble the address, then make sure |
| * it is valid and we can actually access it. |
| */ |
| base = si->lfb_base; |
| if (si->capabilities & VIDEO_CAPABILITY_64BIT_BASE) |
| base |= (u64)si->ext_lfb_base << 32; |
| if (!base || (u64)(resource_size_t)base != base) { |
| printk(KERN_DEBUG "sysfb: inaccessible VRAM base\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| /* |
| * Don't use lfb_size as IORESOURCE size, since it may contain the |
| * entire VMEM, and thus require huge mappings. Use just the part we |
| * need, that is, the part where the framebuffer is located. But verify |
| * that it does not exceed the advertised VMEM. |
| * Note that in case of VBE, the lfb_size is shifted by 16 bits for |
| * historical reasons. |
| */ |
| size = si->lfb_size; |
| if (si->orig_video_isVGA == VIDEO_TYPE_VLFB) |
| size <<= 16; |
| length = mode->height * mode->stride; |
| if (length > size) { |
| printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| length = PAGE_ALIGN(length); |
| |
| /* setup IORESOURCE_MEM as framebuffer memory */ |
| memset(&res, 0, sizeof(res)); |
| res.flags = IORESOURCE_MEM; |
| res.name = simplefb_resname; |
| res.start = base; |
| res.end = res.start + length - 1; |
| if (res.end <= res.start) |
| return ERR_PTR(-EINVAL); |
| |
| pd = platform_device_alloc("simple-framebuffer", 0); |
| if (!pd) |
| return ERR_PTR(-ENOMEM); |
| |
| sysfb_set_efifb_fwnode(pd); |
| |
| ret = platform_device_add_resources(pd, &res, 1); |
| if (ret) |
| goto err_put_device; |
| |
| ret = platform_device_add_data(pd, mode, sizeof(*mode)); |
| if (ret) |
| goto err_put_device; |
| |
| ret = platform_device_add(pd); |
| if (ret) |
| goto err_put_device; |
| |
| return pd; |
| |
| err_put_device: |
| platform_device_put(pd); |
| |
| return ERR_PTR(ret); |
| } |