| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* |
| * Driver for the MDIO interface of Microsemi network switches. |
| * |
| * Author: Alexandre Belloni <alexandre.belloni@bootlin.com> |
| * Copyright (c) 2017 Microsemi Corporation |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_mdio.h> |
| #include <linux/phy.h> |
| #include <linux/platform_device.h> |
| |
| #define MSCC_MIIM_REG_STATUS 0x0 |
| #define MSCC_MIIM_STATUS_STAT_PENDING BIT(2) |
| #define MSCC_MIIM_STATUS_STAT_BUSY BIT(3) |
| #define MSCC_MIIM_REG_CMD 0x8 |
| #define MSCC_MIIM_CMD_OPR_WRITE BIT(1) |
| #define MSCC_MIIM_CMD_OPR_READ BIT(2) |
| #define MSCC_MIIM_CMD_WRDATA_SHIFT 4 |
| #define MSCC_MIIM_CMD_REGAD_SHIFT 20 |
| #define MSCC_MIIM_CMD_PHYAD_SHIFT 25 |
| #define MSCC_MIIM_CMD_VLD BIT(31) |
| #define MSCC_MIIM_REG_DATA 0xC |
| #define MSCC_MIIM_DATA_ERROR (BIT(16) | BIT(17)) |
| |
| #define MSCC_PHY_REG_PHY_CFG 0x0 |
| #define PHY_CFG_PHY_ENA (BIT(0) | BIT(1) | BIT(2) | BIT(3)) |
| #define PHY_CFG_PHY_COMMON_RESET BIT(4) |
| #define PHY_CFG_PHY_RESET (BIT(5) | BIT(6) | BIT(7) | BIT(8)) |
| #define MSCC_PHY_REG_PHY_STATUS 0x4 |
| |
| struct mscc_miim_dev { |
| void __iomem *regs; |
| void __iomem *phy_regs; |
| }; |
| |
| /* When high resolution timers aren't built-in: we can't use usleep_range() as |
| * we would sleep way too long. Use udelay() instead. |
| */ |
| #define mscc_readl_poll_timeout(addr, val, cond, delay_us, timeout_us) \ |
| ({ \ |
| if (!IS_ENABLED(CONFIG_HIGH_RES_TIMERS)) \ |
| readl_poll_timeout_atomic(addr, val, cond, delay_us, \ |
| timeout_us); \ |
| readl_poll_timeout(addr, val, cond, delay_us, timeout_us); \ |
| }) |
| |
| static int mscc_miim_wait_ready(struct mii_bus *bus) |
| { |
| struct mscc_miim_dev *miim = bus->priv; |
| u32 val; |
| |
| return mscc_readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val, |
| !(val & MSCC_MIIM_STATUS_STAT_BUSY), 50, |
| 10000); |
| } |
| |
| static int mscc_miim_wait_pending(struct mii_bus *bus) |
| { |
| struct mscc_miim_dev *miim = bus->priv; |
| u32 val; |
| |
| return mscc_readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val, |
| !(val & MSCC_MIIM_STATUS_STAT_PENDING), |
| 50, 10000); |
| } |
| |
| static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum) |
| { |
| struct mscc_miim_dev *miim = bus->priv; |
| u32 val; |
| int ret; |
| |
| ret = mscc_miim_wait_pending(bus); |
| if (ret) |
| goto out; |
| |
| writel(MSCC_MIIM_CMD_VLD | (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) | |
| (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) | MSCC_MIIM_CMD_OPR_READ, |
| miim->regs + MSCC_MIIM_REG_CMD); |
| |
| ret = mscc_miim_wait_ready(bus); |
| if (ret) |
| goto out; |
| |
| val = readl(miim->regs + MSCC_MIIM_REG_DATA); |
| if (val & MSCC_MIIM_DATA_ERROR) { |
| ret = -EIO; |
| goto out; |
| } |
| |
| ret = val & 0xFFFF; |
| out: |
| return ret; |
| } |
| |
| static int mscc_miim_write(struct mii_bus *bus, int mii_id, |
| int regnum, u16 value) |
| { |
| struct mscc_miim_dev *miim = bus->priv; |
| int ret; |
| |
| ret = mscc_miim_wait_pending(bus); |
| if (ret < 0) |
| goto out; |
| |
| writel(MSCC_MIIM_CMD_VLD | (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) | |
| (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) | |
| (value << MSCC_MIIM_CMD_WRDATA_SHIFT) | |
| MSCC_MIIM_CMD_OPR_WRITE, |
| miim->regs + MSCC_MIIM_REG_CMD); |
| |
| out: |
| return ret; |
| } |
| |
| static int mscc_miim_reset(struct mii_bus *bus) |
| { |
| struct mscc_miim_dev *miim = bus->priv; |
| |
| if (miim->phy_regs) { |
| writel(0, miim->phy_regs + MSCC_PHY_REG_PHY_CFG); |
| writel(0x1ff, miim->phy_regs + MSCC_PHY_REG_PHY_CFG); |
| mdelay(500); |
| } |
| |
| return 0; |
| } |
| |
| static int mscc_miim_probe(struct platform_device *pdev) |
| { |
| struct mscc_miim_dev *dev; |
| struct resource *res; |
| struct mii_bus *bus; |
| int ret; |
| |
| bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*dev)); |
| if (!bus) |
| return -ENOMEM; |
| |
| bus->name = "mscc_miim"; |
| bus->read = mscc_miim_read; |
| bus->write = mscc_miim_write; |
| bus->reset = mscc_miim_reset; |
| snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev)); |
| bus->parent = &pdev->dev; |
| |
| dev = bus->priv; |
| dev->regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); |
| if (IS_ERR(dev->regs)) { |
| dev_err(&pdev->dev, "Unable to map MIIM registers\n"); |
| return PTR_ERR(dev->regs); |
| } |
| |
| /* This resource is optional */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (res) { |
| dev->phy_regs = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(dev->phy_regs)) { |
| dev_err(&pdev->dev, "Unable to map internal phy registers\n"); |
| return PTR_ERR(dev->phy_regs); |
| } |
| } |
| |
| ret = of_mdiobus_register(bus, pdev->dev.of_node); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, bus); |
| |
| return 0; |
| } |
| |
| static int mscc_miim_remove(struct platform_device *pdev) |
| { |
| struct mii_bus *bus = platform_get_drvdata(pdev); |
| |
| mdiobus_unregister(bus); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mscc_miim_match[] = { |
| { .compatible = "mscc,ocelot-miim" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, mscc_miim_match); |
| |
| static struct platform_driver mscc_miim_driver = { |
| .probe = mscc_miim_probe, |
| .remove = mscc_miim_remove, |
| .driver = { |
| .name = "mscc-miim", |
| .of_match_table = mscc_miim_match, |
| }, |
| }; |
| |
| module_platform_driver(mscc_miim_driver); |
| |
| MODULE_DESCRIPTION("Microsemi MIIM driver"); |
| MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>"); |
| MODULE_LICENSE("Dual MIT/GPL"); |