| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* |
| * Copyright (c) 2018 BayLibre, SAS. |
| * Author: Jerome Brunet <jbrunet@baylibre.com> |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/module.h> |
| |
| #include "clk-regmap.h" |
| #include "clk-phase.h" |
| |
| #define phase_step(_width) (360 / (1 << (_width))) |
| |
| static inline struct meson_clk_phase_data * |
| meson_clk_phase_data(struct clk_regmap *clk) |
| { |
| return (struct meson_clk_phase_data *)clk->data; |
| } |
| |
| static int meson_clk_degrees_from_val(unsigned int val, unsigned int width) |
| { |
| return phase_step(width) * val; |
| } |
| |
| static unsigned int meson_clk_degrees_to_val(int degrees, unsigned int width) |
| { |
| unsigned int val = DIV_ROUND_CLOSEST(degrees, phase_step(width)); |
| |
| /* |
| * This last calculation is here for cases when degrees is rounded |
| * to 360, in which case val == (1 << width). |
| */ |
| return val % (1 << width); |
| } |
| |
| static int meson_clk_phase_get_phase(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_phase_data *phase = meson_clk_phase_data(clk); |
| unsigned int val; |
| |
| val = meson_parm_read(clk->map, &phase->ph); |
| |
| return meson_clk_degrees_from_val(val, phase->ph.width); |
| } |
| |
| static int meson_clk_phase_set_phase(struct clk_hw *hw, int degrees) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_phase_data *phase = meson_clk_phase_data(clk); |
| unsigned int val; |
| |
| val = meson_clk_degrees_to_val(degrees, phase->ph.width); |
| meson_parm_write(clk->map, &phase->ph, val); |
| |
| return 0; |
| } |
| |
| const struct clk_ops meson_clk_phase_ops = { |
| .get_phase = meson_clk_phase_get_phase, |
| .set_phase = meson_clk_phase_set_phase, |
| }; |
| EXPORT_SYMBOL_GPL(meson_clk_phase_ops); |
| |
| /* |
| * This is a special clock for the audio controller. |
| * The phase of mst_sclk clock output can be controlled independently |
| * for the outside world (ph0), the tdmout (ph1) and tdmin (ph2). |
| * Controlling these 3 phases as just one makes things simpler and |
| * give the same clock view to all the element on the i2s bus. |
| * If necessary, we can still control the phase in the tdm block |
| * which makes these independent control redundant. |
| */ |
| static inline struct meson_clk_triphase_data * |
| meson_clk_triphase_data(struct clk_regmap *clk) |
| { |
| return (struct meson_clk_triphase_data *)clk->data; |
| } |
| |
| static int meson_clk_triphase_sync(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_triphase_data *tph = meson_clk_triphase_data(clk); |
| unsigned int val; |
| |
| /* Get phase 0 and sync it to phase 1 and 2 */ |
| val = meson_parm_read(clk->map, &tph->ph0); |
| meson_parm_write(clk->map, &tph->ph1, val); |
| meson_parm_write(clk->map, &tph->ph2, val); |
| |
| return 0; |
| } |
| |
| static int meson_clk_triphase_get_phase(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_triphase_data *tph = meson_clk_triphase_data(clk); |
| unsigned int val; |
| |
| /* Phase are in sync, reading phase 0 is enough */ |
| val = meson_parm_read(clk->map, &tph->ph0); |
| |
| return meson_clk_degrees_from_val(val, tph->ph0.width); |
| } |
| |
| static int meson_clk_triphase_set_phase(struct clk_hw *hw, int degrees) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_triphase_data *tph = meson_clk_triphase_data(clk); |
| unsigned int val; |
| |
| val = meson_clk_degrees_to_val(degrees, tph->ph0.width); |
| meson_parm_write(clk->map, &tph->ph0, val); |
| meson_parm_write(clk->map, &tph->ph1, val); |
| meson_parm_write(clk->map, &tph->ph2, val); |
| |
| return 0; |
| } |
| |
| const struct clk_ops meson_clk_triphase_ops = { |
| .init = meson_clk_triphase_sync, |
| .get_phase = meson_clk_triphase_get_phase, |
| .set_phase = meson_clk_triphase_set_phase, |
| }; |
| EXPORT_SYMBOL_GPL(meson_clk_triphase_ops); |
| |
| MODULE_DESCRIPTION("Amlogic phase driver"); |
| MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); |
| MODULE_LICENSE("GPL v2"); |