| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * byt_cr_dpcm_rt5640.c - ASoc Machine driver for Intel Byt CR platform |
| * |
| * Copyright (C) 2014 Intel Corp |
| * Author: Subhransu S. Prusty <subhransu.s.prusty@intel.com> |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/platform_device.h> |
| #include <linux/acpi.h> |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/dmi.h> |
| #include <linux/input.h> |
| #include <linux/slab.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/jack.h> |
| #include <sound/soc-acpi.h> |
| #include <dt-bindings/sound/rt5640.h> |
| #include "../../codecs/rt5640.h" |
| #include "../atom/sst-atom-controls.h" |
| #include "../common/soc-intel-quirks.h" |
| |
| enum { |
| BYT_RT5640_DMIC1_MAP, |
| BYT_RT5640_DMIC2_MAP, |
| BYT_RT5640_IN1_MAP, |
| BYT_RT5640_IN3_MAP, |
| }; |
| |
| enum { |
| BYT_RT5640_JD_SRC_GPIO1 = (RT5640_JD_SRC_GPIO1 << 4), |
| BYT_RT5640_JD_SRC_JD1_IN4P = (RT5640_JD_SRC_JD1_IN4P << 4), |
| BYT_RT5640_JD_SRC_JD2_IN4N = (RT5640_JD_SRC_JD2_IN4N << 4), |
| BYT_RT5640_JD_SRC_GPIO2 = (RT5640_JD_SRC_GPIO2 << 4), |
| BYT_RT5640_JD_SRC_GPIO3 = (RT5640_JD_SRC_GPIO3 << 4), |
| BYT_RT5640_JD_SRC_GPIO4 = (RT5640_JD_SRC_GPIO4 << 4), |
| }; |
| |
| enum { |
| BYT_RT5640_OVCD_TH_600UA = (6 << 8), |
| BYT_RT5640_OVCD_TH_1500UA = (15 << 8), |
| BYT_RT5640_OVCD_TH_2000UA = (20 << 8), |
| }; |
| |
| enum { |
| BYT_RT5640_OVCD_SF_0P5 = (RT5640_OVCD_SF_0P5 << 13), |
| BYT_RT5640_OVCD_SF_0P75 = (RT5640_OVCD_SF_0P75 << 13), |
| BYT_RT5640_OVCD_SF_1P0 = (RT5640_OVCD_SF_1P0 << 13), |
| BYT_RT5640_OVCD_SF_1P5 = (RT5640_OVCD_SF_1P5 << 13), |
| }; |
| |
| #define BYT_RT5640_MAP(quirk) ((quirk) & GENMASK(3, 0)) |
| #define BYT_RT5640_JDSRC(quirk) (((quirk) & GENMASK(7, 4)) >> 4) |
| #define BYT_RT5640_OVCD_TH(quirk) (((quirk) & GENMASK(12, 8)) >> 8) |
| #define BYT_RT5640_OVCD_SF(quirk) (((quirk) & GENMASK(14, 13)) >> 13) |
| #define BYT_RT5640_JD_NOT_INV BIT(16) |
| #define BYT_RT5640_MONO_SPEAKER BIT(17) |
| #define BYT_RT5640_DIFF_MIC BIT(18) /* default is single-ended */ |
| #define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */ |
| #define BYT_RT5640_SSP0_AIF1 BIT(20) |
| #define BYT_RT5640_SSP0_AIF2 BIT(21) |
| #define BYT_RT5640_MCLK_EN BIT(22) |
| #define BYT_RT5640_MCLK_25MHZ BIT(23) |
| |
| #define BYTCR_INPUT_DEFAULTS \ |
| (BYT_RT5640_IN3_MAP | \ |
| BYT_RT5640_JD_SRC_JD1_IN4P | \ |
| BYT_RT5640_OVCD_TH_2000UA | \ |
| BYT_RT5640_OVCD_SF_0P75 | \ |
| BYT_RT5640_DIFF_MIC) |
| |
| /* in-diff or dmic-pin + jdsrc + ovcd-th + -sf + jd-inv + terminating entry */ |
| #define MAX_NO_PROPS 6 |
| |
| struct byt_rt5640_private { |
| struct snd_soc_jack jack; |
| struct clk *mclk; |
| }; |
| static bool is_bytcr; |
| |
| static unsigned long byt_rt5640_quirk = BYT_RT5640_MCLK_EN; |
| static int quirk_override = -1; |
| module_param_named(quirk, quirk_override, int, 0444); |
| MODULE_PARM_DESC(quirk, "Board-specific quirk override"); |
| |
| static void log_quirks(struct device *dev) |
| { |
| int map; |
| bool has_mclk = false; |
| bool has_ssp0 = false; |
| bool has_ssp0_aif1 = false; |
| bool has_ssp0_aif2 = false; |
| bool has_ssp2_aif2 = false; |
| |
| map = BYT_RT5640_MAP(byt_rt5640_quirk); |
| switch (map) { |
| case BYT_RT5640_DMIC1_MAP: |
| dev_info(dev, "quirk DMIC1_MAP enabled\n"); |
| break; |
| case BYT_RT5640_DMIC2_MAP: |
| dev_info(dev, "quirk DMIC2_MAP enabled\n"); |
| break; |
| case BYT_RT5640_IN1_MAP: |
| dev_info(dev, "quirk IN1_MAP enabled\n"); |
| break; |
| case BYT_RT5640_IN3_MAP: |
| dev_info(dev, "quirk IN3_MAP enabled\n"); |
| break; |
| default: |
| dev_err(dev, "quirk map 0x%x is not supported, microphone input will not work\n", map); |
| break; |
| } |
| if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) { |
| dev_info(dev, "quirk realtek,jack-detect-source %ld\n", |
| BYT_RT5640_JDSRC(byt_rt5640_quirk)); |
| dev_info(dev, "quirk realtek,over-current-threshold-microamp %ld\n", |
| BYT_RT5640_OVCD_TH(byt_rt5640_quirk) * 100); |
| dev_info(dev, "quirk realtek,over-current-scale-factor %ld\n", |
| BYT_RT5640_OVCD_SF(byt_rt5640_quirk)); |
| } |
| if (byt_rt5640_quirk & BYT_RT5640_JD_NOT_INV) |
| dev_info(dev, "quirk JD_NOT_INV enabled\n"); |
| if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) |
| dev_info(dev, "quirk MONO_SPEAKER enabled\n"); |
| if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) |
| dev_info(dev, "quirk DIFF_MIC enabled\n"); |
| if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) { |
| dev_info(dev, "quirk SSP0_AIF1 enabled\n"); |
| has_ssp0 = true; |
| has_ssp0_aif1 = true; |
| } |
| if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2) { |
| dev_info(dev, "quirk SSP0_AIF2 enabled\n"); |
| has_ssp0 = true; |
| has_ssp0_aif2 = true; |
| } |
| if (byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) { |
| dev_info(dev, "quirk SSP2_AIF2 enabled\n"); |
| has_ssp2_aif2 = true; |
| } |
| if (is_bytcr && !has_ssp0) |
| dev_err(dev, "Invalid routing, bytcr detected but no SSP0-based quirk, audio cannot work with SSP2 on bytcr\n"); |
| if (has_ssp0_aif1 && has_ssp0_aif2) |
| dev_err(dev, "Invalid routing, SSP0 cannot be connected to both AIF1 and AIF2\n"); |
| if (has_ssp0 && has_ssp2_aif2) |
| dev_err(dev, "Invalid routing, cannot have both SSP0 and SSP2 connected to codec\n"); |
| |
| if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { |
| dev_info(dev, "quirk MCLK_EN enabled\n"); |
| has_mclk = true; |
| } |
| if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) { |
| if (has_mclk) |
| dev_info(dev, "quirk MCLK_25MHZ enabled\n"); |
| else |
| dev_err(dev, "quirk MCLK_25MHZ enabled but quirk MCLK not selected, will be ignored\n"); |
| } |
| } |
| |
| static int byt_rt5640_prepare_and_enable_pll1(struct snd_soc_dai *codec_dai, |
| int rate) |
| { |
| int ret; |
| |
| /* Configure the PLL before selecting it */ |
| if (!(byt_rt5640_quirk & BYT_RT5640_MCLK_EN)) { |
| /* use bitclock as PLL input */ |
| if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) || |
| (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) { |
| /* 2x16 bit slots on SSP0 */ |
| ret = snd_soc_dai_set_pll(codec_dai, 0, |
| RT5640_PLL1_S_BCLK1, |
| rate * 32, rate * 512); |
| } else { |
| /* 2x15 bit slots on SSP2 */ |
| ret = snd_soc_dai_set_pll(codec_dai, 0, |
| RT5640_PLL1_S_BCLK1, |
| rate * 50, rate * 512); |
| } |
| } else { |
| if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) { |
| ret = snd_soc_dai_set_pll(codec_dai, 0, |
| RT5640_PLL1_S_MCLK, |
| 25000000, rate * 512); |
| } else { |
| ret = snd_soc_dai_set_pll(codec_dai, 0, |
| RT5640_PLL1_S_MCLK, |
| 19200000, rate * 512); |
| } |
| } |
| |
| if (ret < 0) { |
| dev_err(codec_dai->component->dev, "can't set pll: %d\n", ret); |
| return ret; |
| } |
| |
| ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_PLL1, |
| rate * 512, SND_SOC_CLOCK_IN); |
| if (ret < 0) { |
| dev_err(codec_dai->component->dev, "can't set clock %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| #define BYT_CODEC_DAI1 "rt5640-aif1" |
| #define BYT_CODEC_DAI2 "rt5640-aif2" |
| |
| static int platform_clock_control(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *k, int event) |
| { |
| struct snd_soc_dapm_context *dapm = w->dapm; |
| struct snd_soc_card *card = dapm->card; |
| struct snd_soc_dai *codec_dai; |
| struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card); |
| int ret; |
| |
| codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1); |
| if (!codec_dai) |
| codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI2); |
| |
| if (!codec_dai) { |
| dev_err(card->dev, |
| "Codec dai not found; Unable to set platform clock\n"); |
| return -EIO; |
| } |
| |
| if (SND_SOC_DAPM_EVENT_ON(event)) { |
| if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { |
| ret = clk_prepare_enable(priv->mclk); |
| if (ret < 0) { |
| dev_err(card->dev, |
| "could not configure MCLK state\n"); |
| return ret; |
| } |
| } |
| ret = byt_rt5640_prepare_and_enable_pll1(codec_dai, 48000); |
| } else { |
| /* |
| * Set codec clock source to internal clock before |
| * turning off the platform clock. Codec needs clock |
| * for Jack detection and button press |
| */ |
| ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_RCCLK, |
| 48000 * 512, |
| SND_SOC_CLOCK_IN); |
| if (!ret) { |
| if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) |
| clk_disable_unprepare(priv->mclk); |
| } |
| } |
| |
| if (ret < 0) { |
| dev_err(card->dev, "can't set codec sysclk: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget byt_rt5640_widgets[] = { |
| SND_SOC_DAPM_HP("Headphone", NULL), |
| SND_SOC_DAPM_MIC("Headset Mic", NULL), |
| SND_SOC_DAPM_MIC("Internal Mic", NULL), |
| SND_SOC_DAPM_SPK("Speaker", NULL), |
| SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, |
| platform_clock_control, SND_SOC_DAPM_PRE_PMU | |
| SND_SOC_DAPM_POST_PMD), |
| |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5640_audio_map[] = { |
| {"Headphone", NULL, "Platform Clock"}, |
| {"Headset Mic", NULL, "Platform Clock"}, |
| {"Internal Mic", NULL, "Platform Clock"}, |
| {"Speaker", NULL, "Platform Clock"}, |
| |
| {"Headset Mic", NULL, "MICBIAS1"}, |
| {"IN2P", NULL, "Headset Mic"}, |
| {"Headphone", NULL, "HPOL"}, |
| {"Headphone", NULL, "HPOR"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5640_intmic_dmic1_map[] = { |
| {"DMIC1", NULL, "Internal Mic"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5640_intmic_dmic2_map[] = { |
| {"DMIC2", NULL, "Internal Mic"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5640_intmic_in1_map[] = { |
| {"Internal Mic", NULL, "MICBIAS1"}, |
| {"IN1P", NULL, "Internal Mic"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5640_intmic_in3_map[] = { |
| {"Internal Mic", NULL, "MICBIAS1"}, |
| {"IN3P", NULL, "Internal Mic"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5640_ssp2_aif1_map[] = { |
| {"ssp2 Tx", NULL, "codec_out0"}, |
| {"ssp2 Tx", NULL, "codec_out1"}, |
| {"codec_in0", NULL, "ssp2 Rx"}, |
| {"codec_in1", NULL, "ssp2 Rx"}, |
| |
| {"AIF1 Playback", NULL, "ssp2 Tx"}, |
| {"ssp2 Rx", NULL, "AIF1 Capture"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5640_ssp2_aif2_map[] = { |
| {"ssp2 Tx", NULL, "codec_out0"}, |
| {"ssp2 Tx", NULL, "codec_out1"}, |
| {"codec_in0", NULL, "ssp2 Rx"}, |
| {"codec_in1", NULL, "ssp2 Rx"}, |
| |
| {"AIF2 Playback", NULL, "ssp2 Tx"}, |
| {"ssp2 Rx", NULL, "AIF2 Capture"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5640_ssp0_aif1_map[] = { |
| {"ssp0 Tx", NULL, "modem_out"}, |
| {"modem_in", NULL, "ssp0 Rx"}, |
| |
| {"AIF1 Playback", NULL, "ssp0 Tx"}, |
| {"ssp0 Rx", NULL, "AIF1 Capture"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5640_ssp0_aif2_map[] = { |
| {"ssp0 Tx", NULL, "modem_out"}, |
| {"modem_in", NULL, "ssp0 Rx"}, |
| |
| {"AIF2 Playback", NULL, "ssp0 Tx"}, |
| {"ssp0 Rx", NULL, "AIF2 Capture"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5640_stereo_spk_map[] = { |
| {"Speaker", NULL, "SPOLP"}, |
| {"Speaker", NULL, "SPOLN"}, |
| {"Speaker", NULL, "SPORP"}, |
| {"Speaker", NULL, "SPORN"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5640_mono_spk_map[] = { |
| {"Speaker", NULL, "SPOLP"}, |
| {"Speaker", NULL, "SPOLN"}, |
| }; |
| |
| static const struct snd_kcontrol_new byt_rt5640_controls[] = { |
| SOC_DAPM_PIN_SWITCH("Headphone"), |
| SOC_DAPM_PIN_SWITCH("Headset Mic"), |
| SOC_DAPM_PIN_SWITCH("Internal Mic"), |
| SOC_DAPM_PIN_SWITCH("Speaker"), |
| }; |
| |
| static struct snd_soc_jack_pin rt5640_pins[] = { |
| { |
| .pin = "Headphone", |
| .mask = SND_JACK_HEADPHONE, |
| }, |
| { |
| .pin = "Headset Mic", |
| .mask = SND_JACK_MICROPHONE, |
| }, |
| }; |
| |
| static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct snd_soc_dai *dai = asoc_rtd_to_codec(rtd, 0); |
| |
| return byt_rt5640_prepare_and_enable_pll1(dai, params_rate(params)); |
| } |
| |
| /* Please keep this list alphabetically sorted */ |
| static const struct dmi_system_id byt_rt5640_quirk_table[] = { |
| { /* Acer Iconia Tab 8 W1-810 */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Iconia W1-810"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | |
| BYT_RT5640_JD_SRC_JD1_IN4P | |
| BYT_RT5640_OVCD_TH_1500UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ARCHOS 80 Cesium"), |
| }, |
| .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ME176C"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_IN1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_IN1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_IN1_MAP | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_DIFF_MIC | |
| BYT_RT5640_SSP0_AIF2 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Chuwi Vi8 (CWI506) */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "i86"), |
| /* The above are too generic, also match BIOS info */ |
| DMI_MATCH(DMI_BIOS_VERSION, "CHUWI.D86JLBNR"), |
| }, |
| .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { |
| /* Chuwi Vi10 (CWI505) */ |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), |
| DMI_MATCH(DMI_BOARD_NAME, "BYT-PF02"), |
| DMI_MATCH(DMI_SYS_VENDOR, "ilife"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "S165"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_IN1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_DIFF_MIC | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_DMIC1_MAP), |
| }, |
| { /* Connect Tablet 9 */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Connect"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Tablet 9"), |
| }, |
| .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Venue 8 Pro 5830"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP ElitePad 1000 G2"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_IN1_MAP | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* HP Pavilion x2 10-n000nd */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_1500UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* HP Stream 7 */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Stream 7 Tablet"), |
| }, |
| .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_JD_NOT_INV | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* I.T.Works TW891 */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"), |
| DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."), |
| DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"), |
| }, |
| .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Lamina I8270 / T701BR.SE */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Lamina"), |
| DMI_EXACT_MATCH(DMI_BOARD_NAME, "T701BR.SE"), |
| }, |
| .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_JD_NOT_INV | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Lenovo Miix 2 8 */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "20326"), |
| DMI_EXACT_MATCH(DMI_BOARD_NAME, "Hiking"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Linx Linx7 tablet */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LINX"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LINX7"), |
| }, |
| .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_JD_NOT_INV | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* MPMAN Converter 9, similar hw as the I.T.Works TW891 2-in-1 */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "MPMAN"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Converter9"), |
| }, |
| .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { |
| /* MPMAN MPWIN895CL */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MPMAN"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MPWIN8900CL"), |
| }, |
| .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* MSI S100 tablet */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "S100"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_IN1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_DIFF_MIC | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Nuvison/TMax TM800W560 */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TMAX"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TM800W560L"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_IN1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_JD_NOT_INV | |
| BYT_RT5640_DIFF_MIC | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Onda v975w */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), |
| DMI_EXACT_MATCH(DMI_BOARD_NAME, "Aptio CRB"), |
| /* The above are too generic, also match BIOS info */ |
| DMI_EXACT_MATCH(DMI_BIOS_VERSION, "5.6.5"), |
| DMI_EXACT_MATCH(DMI_BIOS_DATE, "07/25/2014"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_IN1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_DIFF_MIC | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Pipo W4 */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), |
| DMI_EXACT_MATCH(DMI_BOARD_NAME, "Aptio CRB"), |
| /* The above are too generic, also match BIOS info */ |
| DMI_MATCH(DMI_BIOS_VERSION, "V8L_WIN32_CHIPHD"), |
| }, |
| .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Point of View Mobii TAB-P800W (V2.0) */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), |
| DMI_EXACT_MATCH(DMI_BOARD_NAME, "Aptio CRB"), |
| /* The above are too generic, also match BIOS info */ |
| DMI_EXACT_MATCH(DMI_BIOS_VERSION, "3BAIR1014"), |
| DMI_EXACT_MATCH(DMI_BIOS_DATE, "10/24/2014"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_IN1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_DIFF_MIC | |
| BYT_RT5640_SSP0_AIF2 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Point of View Mobii TAB-P800W (V2.1) */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), |
| DMI_EXACT_MATCH(DMI_BOARD_NAME, "Aptio CRB"), |
| /* The above are too generic, also match BIOS info */ |
| DMI_EXACT_MATCH(DMI_BIOS_VERSION, "3BAIR1013"), |
| DMI_EXACT_MATCH(DMI_BIOS_DATE, "08/22/2014"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_IN1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_MONO_SPEAKER | |
| BYT_RT5640_DIFF_MIC | |
| BYT_RT5640_SSP0_AIF2 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Point of View Mobii TAB-P1005W-232 (V2.0) */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "POV"), |
| DMI_EXACT_MATCH(DMI_BOARD_NAME, "I102A"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_IN1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_DIFF_MIC | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { |
| /* Prowise PT301 */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Prowise"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "PT301"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_IN1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_DIFF_MIC | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { |
| /* Teclast X89 */ |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"), |
| DMI_MATCH(DMI_BOARD_NAME, "tPAD"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_IN3_MAP | |
| BYT_RT5640_JD_SRC_JD1_IN4P | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_1P0 | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Toshiba Satellite Click Mini L9W-B */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "SATELLITE Click Mini L9W-B"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_1500UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_SSP0_AIF1 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Toshiba Encore WT8-A */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT8-A"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_JD_NOT_INV | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Toshiba Encore WT10-A */ |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT10-A-103"), |
| }, |
| .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | |
| BYT_RT5640_JD_SRC_JD1_IN4P | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75 | |
| BYT_RT5640_SSP0_AIF2 | |
| BYT_RT5640_MCLK_EN), |
| }, |
| { /* Catch-all for generic Insyde tablets, must be last */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), |
| }, |
| .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | |
| BYT_RT5640_MCLK_EN | |
| BYT_RT5640_SSP0_AIF1), |
| |
| }, |
| {} |
| }; |
| |
| /* |
| * Note this MUST be called before snd_soc_register_card(), so that the props |
| * are in place before the codec component driver's probe function parses them. |
| */ |
| static int byt_rt5640_add_codec_device_props(const char *i2c_dev_name) |
| { |
| struct property_entry props[MAX_NO_PROPS] = {}; |
| struct device *i2c_dev; |
| int ret, cnt = 0; |
| |
| i2c_dev = bus_find_device_by_name(&i2c_bus_type, NULL, i2c_dev_name); |
| if (!i2c_dev) |
| return -EPROBE_DEFER; |
| |
| switch (BYT_RT5640_MAP(byt_rt5640_quirk)) { |
| case BYT_RT5640_DMIC1_MAP: |
| props[cnt++] = PROPERTY_ENTRY_U32("realtek,dmic1-data-pin", |
| RT5640_DMIC1_DATA_PIN_IN1P); |
| break; |
| case BYT_RT5640_DMIC2_MAP: |
| props[cnt++] = PROPERTY_ENTRY_U32("realtek,dmic2-data-pin", |
| RT5640_DMIC2_DATA_PIN_IN1N); |
| break; |
| case BYT_RT5640_IN1_MAP: |
| if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) |
| props[cnt++] = |
| PROPERTY_ENTRY_BOOL("realtek,in1-differential"); |
| break; |
| case BYT_RT5640_IN3_MAP: |
| if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) |
| props[cnt++] = |
| PROPERTY_ENTRY_BOOL("realtek,in3-differential"); |
| break; |
| } |
| |
| if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) { |
| props[cnt++] = PROPERTY_ENTRY_U32( |
| "realtek,jack-detect-source", |
| BYT_RT5640_JDSRC(byt_rt5640_quirk)); |
| |
| props[cnt++] = PROPERTY_ENTRY_U32( |
| "realtek,over-current-threshold-microamp", |
| BYT_RT5640_OVCD_TH(byt_rt5640_quirk) * 100); |
| |
| props[cnt++] = PROPERTY_ENTRY_U32( |
| "realtek,over-current-scale-factor", |
| BYT_RT5640_OVCD_SF(byt_rt5640_quirk)); |
| } |
| |
| if (byt_rt5640_quirk & BYT_RT5640_JD_NOT_INV) |
| props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,jack-detect-not-inverted"); |
| |
| ret = device_add_properties(i2c_dev, props); |
| put_device(i2c_dev); |
| |
| return ret; |
| } |
| |
| static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime) |
| { |
| struct snd_soc_card *card = runtime->card; |
| struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card); |
| struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component; |
| const struct snd_soc_dapm_route *custom_map; |
| int num_routes; |
| int ret; |
| |
| card->dapm.idle_bias_off = true; |
| |
| /* Start with RC clk for jack-detect (we disable MCLK below) */ |
| if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) |
| snd_soc_component_update_bits(component, RT5640_GLB_CLK, |
| RT5640_SCLK_SRC_MASK, RT5640_SCLK_SRC_RCCLK); |
| |
| rt5640_sel_asrc_clk_src(component, |
| RT5640_DA_STEREO_FILTER | |
| RT5640_DA_MONO_L_FILTER | |
| RT5640_DA_MONO_R_FILTER | |
| RT5640_AD_STEREO_FILTER | |
| RT5640_AD_MONO_L_FILTER | |
| RT5640_AD_MONO_R_FILTER, |
| RT5640_CLK_SEL_ASRC); |
| |
| ret = snd_soc_add_card_controls(card, byt_rt5640_controls, |
| ARRAY_SIZE(byt_rt5640_controls)); |
| if (ret) { |
| dev_err(card->dev, "unable to add card controls\n"); |
| return ret; |
| } |
| |
| switch (BYT_RT5640_MAP(byt_rt5640_quirk)) { |
| case BYT_RT5640_IN1_MAP: |
| custom_map = byt_rt5640_intmic_in1_map; |
| num_routes = ARRAY_SIZE(byt_rt5640_intmic_in1_map); |
| break; |
| case BYT_RT5640_IN3_MAP: |
| custom_map = byt_rt5640_intmic_in3_map; |
| num_routes = ARRAY_SIZE(byt_rt5640_intmic_in3_map); |
| break; |
| case BYT_RT5640_DMIC2_MAP: |
| custom_map = byt_rt5640_intmic_dmic2_map; |
| num_routes = ARRAY_SIZE(byt_rt5640_intmic_dmic2_map); |
| break; |
| default: |
| custom_map = byt_rt5640_intmic_dmic1_map; |
| num_routes = ARRAY_SIZE(byt_rt5640_intmic_dmic1_map); |
| } |
| |
| ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes); |
| if (ret) |
| return ret; |
| |
| if (byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) { |
| ret = snd_soc_dapm_add_routes(&card->dapm, |
| byt_rt5640_ssp2_aif2_map, |
| ARRAY_SIZE(byt_rt5640_ssp2_aif2_map)); |
| } else if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) { |
| ret = snd_soc_dapm_add_routes(&card->dapm, |
| byt_rt5640_ssp0_aif1_map, |
| ARRAY_SIZE(byt_rt5640_ssp0_aif1_map)); |
| } else if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2) { |
| ret = snd_soc_dapm_add_routes(&card->dapm, |
| byt_rt5640_ssp0_aif2_map, |
| ARRAY_SIZE(byt_rt5640_ssp0_aif2_map)); |
| } else { |
| ret = snd_soc_dapm_add_routes(&card->dapm, |
| byt_rt5640_ssp2_aif1_map, |
| ARRAY_SIZE(byt_rt5640_ssp2_aif1_map)); |
| } |
| if (ret) |
| return ret; |
| |
| if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) { |
| ret = snd_soc_dapm_add_routes(&card->dapm, |
| byt_rt5640_mono_spk_map, |
| ARRAY_SIZE(byt_rt5640_mono_spk_map)); |
| } else { |
| ret = snd_soc_dapm_add_routes(&card->dapm, |
| byt_rt5640_stereo_spk_map, |
| ARRAY_SIZE(byt_rt5640_stereo_spk_map)); |
| } |
| if (ret) |
| return ret; |
| |
| if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { |
| /* |
| * The firmware might enable the clock at |
| * boot (this information may or may not |
| * be reflected in the enable clock register). |
| * To change the rate we must disable the clock |
| * first to cover these cases. Due to common |
| * clock framework restrictions that do not allow |
| * to disable a clock that has not been enabled, |
| * we need to enable the clock first. |
| */ |
| ret = clk_prepare_enable(priv->mclk); |
| if (!ret) |
| clk_disable_unprepare(priv->mclk); |
| |
| if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) |
| ret = clk_set_rate(priv->mclk, 25000000); |
| else |
| ret = clk_set_rate(priv->mclk, 19200000); |
| |
| if (ret) { |
| dev_err(card->dev, "unable to set MCLK rate\n"); |
| return ret; |
| } |
| } |
| |
| if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) { |
| ret = snd_soc_card_jack_new(card, "Headset", |
| SND_JACK_HEADSET | SND_JACK_BTN_0, |
| &priv->jack, rt5640_pins, |
| ARRAY_SIZE(rt5640_pins)); |
| if (ret) { |
| dev_err(card->dev, "Jack creation failed %d\n", ret); |
| return ret; |
| } |
| snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0, |
| KEY_PLAYPAUSE); |
| snd_soc_component_set_jack(component, &priv->jack, NULL); |
| } |
| |
| return 0; |
| } |
| |
| static int byt_rt5640_codec_fixup(struct snd_soc_pcm_runtime *rtd, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_interval *rate = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_RATE); |
| struct snd_interval *channels = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_CHANNELS); |
| int ret, bits; |
| |
| /* The DSP will covert the FE rate to 48k, stereo */ |
| rate->min = rate->max = 48000; |
| channels->min = channels->max = 2; |
| |
| if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) || |
| (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) { |
| /* set SSP0 to 16-bit */ |
| params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); |
| bits = 16; |
| } else { |
| /* set SSP2 to 24-bit */ |
| params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); |
| bits = 24; |
| } |
| |
| /* |
| * Default mode for SSP configuration is TDM 4 slot, override config |
| * with explicit setting to I2S 2ch. The word length is set with |
| * dai_set_tdm_slot() since there is no other API exposed |
| */ |
| ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), |
| SND_SOC_DAIFMT_I2S | |
| SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_CBS_CFS); |
| if (ret < 0) { |
| dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); |
| return ret; |
| } |
| |
| ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits); |
| if (ret < 0) { |
| dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int byt_rt5640_aif1_startup(struct snd_pcm_substream *substream) |
| { |
| return snd_pcm_hw_constraint_single(substream->runtime, |
| SNDRV_PCM_HW_PARAM_RATE, 48000); |
| } |
| |
| static const struct snd_soc_ops byt_rt5640_aif1_ops = { |
| .startup = byt_rt5640_aif1_startup, |
| }; |
| |
| static const struct snd_soc_ops byt_rt5640_be_ssp2_ops = { |
| .hw_params = byt_rt5640_aif1_hw_params, |
| }; |
| |
| SND_SOC_DAILINK_DEF(dummy, |
| DAILINK_COMP_ARRAY(COMP_DUMMY())); |
| |
| SND_SOC_DAILINK_DEF(media, |
| DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai"))); |
| |
| SND_SOC_DAILINK_DEF(deepbuffer, |
| DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai"))); |
| |
| SND_SOC_DAILINK_DEF(ssp2_port, |
| /* overwritten for ssp0 routing */ |
| DAILINK_COMP_ARRAY(COMP_CPU("ssp2-port"))); |
| SND_SOC_DAILINK_DEF(ssp2_codec, |
| DAILINK_COMP_ARRAY(COMP_CODEC( |
| /* overwritten with HID */ "i2c-10EC5640:00", |
| /* changed w/ quirk */ "rt5640-aif1"))); |
| |
| SND_SOC_DAILINK_DEF(platform, |
| DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform"))); |
| |
| static struct snd_soc_dai_link byt_rt5640_dais[] = { |
| [MERR_DPCM_AUDIO] = { |
| .name = "Baytrail Audio Port", |
| .stream_name = "Baytrail Audio", |
| .nonatomic = true, |
| .dynamic = 1, |
| .dpcm_playback = 1, |
| .dpcm_capture = 1, |
| .ops = &byt_rt5640_aif1_ops, |
| SND_SOC_DAILINK_REG(media, dummy, platform), |
| }, |
| [MERR_DPCM_DEEP_BUFFER] = { |
| .name = "Deep-Buffer Audio Port", |
| .stream_name = "Deep-Buffer Audio", |
| .nonatomic = true, |
| .dynamic = 1, |
| .dpcm_playback = 1, |
| .ops = &byt_rt5640_aif1_ops, |
| SND_SOC_DAILINK_REG(deepbuffer, dummy, platform), |
| }, |
| /* back ends */ |
| { |
| .name = "SSP2-Codec", |
| .id = 0, |
| .no_pcm = 1, |
| .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
| | SND_SOC_DAIFMT_CBS_CFS, |
| .be_hw_params_fixup = byt_rt5640_codec_fixup, |
| .nonatomic = true, |
| .dpcm_playback = 1, |
| .dpcm_capture = 1, |
| .init = byt_rt5640_init, |
| .ops = &byt_rt5640_be_ssp2_ops, |
| SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform), |
| }, |
| }; |
| |
| /* SoC card */ |
| static char byt_rt5640_codec_name[SND_ACPI_I2C_ID_LEN]; |
| #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES) |
| static char byt_rt5640_long_name[40]; /* = "bytcr-rt5640-*-spk-*-mic" */ |
| #endif |
| static char byt_rt5640_components[32]; /* = "cfg-spk:* cfg-mic:*" */ |
| |
| static int byt_rt5640_suspend(struct snd_soc_card *card) |
| { |
| struct snd_soc_component *component; |
| |
| if (!BYT_RT5640_JDSRC(byt_rt5640_quirk)) |
| return 0; |
| |
| for_each_card_components(card, component) { |
| if (!strcmp(component->name, byt_rt5640_codec_name)) { |
| dev_dbg(component->dev, "disabling jack detect before suspend\n"); |
| snd_soc_component_set_jack(component, NULL, NULL); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int byt_rt5640_resume(struct snd_soc_card *card) |
| { |
| struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card); |
| struct snd_soc_component *component; |
| |
| if (!BYT_RT5640_JDSRC(byt_rt5640_quirk)) |
| return 0; |
| |
| for_each_card_components(card, component) { |
| if (!strcmp(component->name, byt_rt5640_codec_name)) { |
| dev_dbg(component->dev, "re-enabling jack detect after resume\n"); |
| snd_soc_component_set_jack(component, &priv->jack, NULL); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| #if IS_ENABLED(CONFIG_SND_SOC_SOF_BAYTRAIL) |
| /* use space before codec name to simplify card ID, and simplify driver name */ |
| #define CARD_NAME "bytcht rt5640" /* card name will be 'sof-bytcht rt5640' */ |
| #define DRIVER_NAME "SOF" |
| #else |
| #define CARD_NAME "bytcr-rt5640" |
| #define DRIVER_NAME NULL /* card name will be used for driver name */ |
| #endif |
| |
| static struct snd_soc_card byt_rt5640_card = { |
| .name = CARD_NAME, |
| .driver_name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| .dai_link = byt_rt5640_dais, |
| .num_links = ARRAY_SIZE(byt_rt5640_dais), |
| .dapm_widgets = byt_rt5640_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(byt_rt5640_widgets), |
| .dapm_routes = byt_rt5640_audio_map, |
| .num_dapm_routes = ARRAY_SIZE(byt_rt5640_audio_map), |
| .fully_routed = true, |
| .suspend_pre = byt_rt5640_suspend, |
| .resume_post = byt_rt5640_resume, |
| }; |
| |
| struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ |
| u64 aif_value; /* 1: AIF1, 2: AIF2 */ |
| u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */ |
| }; |
| |
| static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) |
| { |
| static const char * const map_name[] = { "dmic1", "dmic2", "in1", "in3" }; |
| const struct dmi_system_id *dmi_id; |
| struct byt_rt5640_private *priv; |
| struct snd_soc_acpi_mach *mach; |
| const char *platform_name; |
| struct acpi_device *adev; |
| int ret_val = 0; |
| int dai_index = 0; |
| int i; |
| |
| is_bytcr = false; |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| /* register the soc card */ |
| byt_rt5640_card.dev = &pdev->dev; |
| mach = byt_rt5640_card.dev->platform_data; |
| snd_soc_card_set_drvdata(&byt_rt5640_card, priv); |
| |
| /* fix index of codec dai */ |
| for (i = 0; i < ARRAY_SIZE(byt_rt5640_dais); i++) { |
| if (!strcmp(byt_rt5640_dais[i].codecs->name, |
| "i2c-10EC5640:00")) { |
| dai_index = i; |
| break; |
| } |
| } |
| |
| /* fixup codec name based on HID */ |
| adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); |
| if (adev) { |
| snprintf(byt_rt5640_codec_name, sizeof(byt_rt5640_codec_name), |
| "i2c-%s", acpi_dev_name(adev)); |
| put_device(&adev->dev); |
| byt_rt5640_dais[dai_index].codecs->name = byt_rt5640_codec_name; |
| } |
| |
| /* |
| * swap SSP0 if bytcr is detected |
| * (will be overridden if DMI quirk is detected) |
| */ |
| if (soc_intel_is_byt()) { |
| if (mach->mach_params.acpi_ipc_irq_index == 0) |
| is_bytcr = true; |
| } |
| |
| if (is_bytcr) { |
| /* |
| * Baytrail CR platforms may have CHAN package in BIOS, try |
| * to find relevant routing quirk based as done on Windows |
| * platforms. We have to read the information directly from the |
| * BIOS, at this stage the card is not created and the links |
| * with the codec driver/pdata are non-existent |
| */ |
| |
| struct acpi_chan_package chan_package; |
| |
| /* format specified: 2 64-bit integers */ |
| struct acpi_buffer format = {sizeof("NN"), "NN"}; |
| struct acpi_buffer state = {0, NULL}; |
| struct snd_soc_acpi_package_context pkg_ctx; |
| bool pkg_found = false; |
| |
| state.length = sizeof(chan_package); |
| state.pointer = &chan_package; |
| |
| pkg_ctx.name = "CHAN"; |
| pkg_ctx.length = 2; |
| pkg_ctx.format = &format; |
| pkg_ctx.state = &state; |
| pkg_ctx.data_valid = false; |
| |
| pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, |
| &pkg_ctx); |
| if (pkg_found) { |
| if (chan_package.aif_value == 1) { |
| dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n"); |
| byt_rt5640_quirk |= BYT_RT5640_SSP0_AIF1; |
| } else if (chan_package.aif_value == 2) { |
| dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n"); |
| byt_rt5640_quirk |= BYT_RT5640_SSP0_AIF2; |
| } else { |
| dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n"); |
| pkg_found = false; |
| } |
| } |
| |
| if (!pkg_found) { |
| /* no BIOS indications, assume SSP0-AIF2 connection */ |
| byt_rt5640_quirk |= BYT_RT5640_SSP0_AIF2; |
| } |
| |
| /* change defaults for Baytrail-CR capture */ |
| byt_rt5640_quirk |= BYTCR_INPUT_DEFAULTS; |
| } else { |
| byt_rt5640_quirk |= BYT_RT5640_DMIC1_MAP | |
| BYT_RT5640_JD_SRC_JD2_IN4N | |
| BYT_RT5640_OVCD_TH_2000UA | |
| BYT_RT5640_OVCD_SF_0P75; |
| } |
| |
| /* check quirks before creating card */ |
| dmi_id = dmi_first_match(byt_rt5640_quirk_table); |
| if (dmi_id) |
| byt_rt5640_quirk = (unsigned long)dmi_id->driver_data; |
| if (quirk_override != -1) { |
| dev_info(&pdev->dev, "Overriding quirk 0x%lx => 0x%x\n", |
| byt_rt5640_quirk, quirk_override); |
| byt_rt5640_quirk = quirk_override; |
| } |
| |
| /* Must be called before register_card, also see declaration comment. */ |
| ret_val = byt_rt5640_add_codec_device_props(byt_rt5640_codec_name); |
| if (ret_val) |
| return ret_val; |
| |
| log_quirks(&pdev->dev); |
| |
| if ((byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) || |
| (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) |
| byt_rt5640_dais[dai_index].codecs->dai_name = "rt5640-aif2"; |
| |
| if ((byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) || |
| (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) |
| byt_rt5640_dais[dai_index].cpus->dai_name = "ssp0-port"; |
| |
| if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { |
| priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); |
| if (IS_ERR(priv->mclk)) { |
| ret_val = PTR_ERR(priv->mclk); |
| |
| dev_err(&pdev->dev, |
| "Failed to get MCLK from pmc_plt_clk_3: %d\n", |
| ret_val); |
| |
| /* |
| * Fall back to bit clock usage for -ENOENT (clock not |
| * available likely due to missing dependencies), bail |
| * for all other errors, including -EPROBE_DEFER |
| */ |
| if (ret_val != -ENOENT) |
| return ret_val; |
| byt_rt5640_quirk &= ~BYT_RT5640_MCLK_EN; |
| } |
| } |
| |
| snprintf(byt_rt5640_components, sizeof(byt_rt5640_components), |
| "cfg-spk:%s cfg-mic:%s", |
| (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ? "1" : "2", |
| map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]); |
| byt_rt5640_card.components = byt_rt5640_components; |
| #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES) |
| snprintf(byt_rt5640_long_name, sizeof(byt_rt5640_long_name), |
| "bytcr-rt5640-%s-spk-%s-mic", |
| (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ? |
| "mono" : "stereo", |
| map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]); |
| byt_rt5640_card.long_name = byt_rt5640_long_name; |
| #endif |
| |
| /* override plaform name, if required */ |
| platform_name = mach->mach_params.platform; |
| |
| ret_val = snd_soc_fixup_dai_links_platform_name(&byt_rt5640_card, |
| platform_name); |
| if (ret_val) |
| return ret_val; |
| |
| ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5640_card); |
| |
| if (ret_val) { |
| dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n", |
| ret_val); |
| return ret_val; |
| } |
| platform_set_drvdata(pdev, &byt_rt5640_card); |
| return ret_val; |
| } |
| |
| static struct platform_driver snd_byt_rt5640_mc_driver = { |
| .driver = { |
| .name = "bytcr_rt5640", |
| #if IS_ENABLED(CONFIG_SND_SOC_SOF_BAYTRAIL) |
| .pm = &snd_soc_pm_ops, |
| #endif |
| }, |
| .probe = snd_byt_rt5640_mc_probe, |
| }; |
| |
| module_platform_driver(snd_byt_rt5640_mc_driver); |
| |
| MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver"); |
| MODULE_AUTHOR("Subhransu S. Prusty <subhransu.s.prusty@intel.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:bytcr_rt5640"); |