| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * ADXL372 3-Axis Digital Accelerometer core driver |
| * |
| * Copyright 2018 Analog Devices Inc. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/spi/spi.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/events.h> |
| #include <linux/iio/trigger.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| |
| #include "adxl372.h" |
| |
| /* ADXL372 registers definition */ |
| #define ADXL372_DEVID 0x00 |
| #define ADXL372_DEVID_MST 0x01 |
| #define ADXL372_PARTID 0x02 |
| #define ADXL372_STATUS_1 0x04 |
| #define ADXL372_STATUS_2 0x05 |
| #define ADXL372_FIFO_ENTRIES_2 0x06 |
| #define ADXL372_FIFO_ENTRIES_1 0x07 |
| #define ADXL372_X_DATA_H 0x08 |
| #define ADXL372_X_DATA_L 0x09 |
| #define ADXL372_Y_DATA_H 0x0A |
| #define ADXL372_Y_DATA_L 0x0B |
| #define ADXL372_Z_DATA_H 0x0C |
| #define ADXL372_Z_DATA_L 0x0D |
| #define ADXL372_X_MAXPEAK_H 0x15 |
| #define ADXL372_X_MAXPEAK_L 0x16 |
| #define ADXL372_Y_MAXPEAK_H 0x17 |
| #define ADXL372_Y_MAXPEAK_L 0x18 |
| #define ADXL372_Z_MAXPEAK_H 0x19 |
| #define ADXL372_Z_MAXPEAK_L 0x1A |
| #define ADXL372_OFFSET_X 0x20 |
| #define ADXL372_OFFSET_Y 0x21 |
| #define ADXL372_OFFSET_Z 0x22 |
| #define ADXL372_X_THRESH_ACT_H 0x23 |
| #define ADXL372_X_THRESH_ACT_L 0x24 |
| #define ADXL372_Y_THRESH_ACT_H 0x25 |
| #define ADXL372_Y_THRESH_ACT_L 0x26 |
| #define ADXL372_Z_THRESH_ACT_H 0x27 |
| #define ADXL372_Z_THRESH_ACT_L 0x28 |
| #define ADXL372_TIME_ACT 0x29 |
| #define ADXL372_X_THRESH_INACT_H 0x2A |
| #define ADXL372_X_THRESH_INACT_L 0x2B |
| #define ADXL372_Y_THRESH_INACT_H 0x2C |
| #define ADXL372_Y_THRESH_INACT_L 0x2D |
| #define ADXL372_Z_THRESH_INACT_H 0x2E |
| #define ADXL372_Z_THRESH_INACT_L 0x2F |
| #define ADXL372_TIME_INACT_H 0x30 |
| #define ADXL372_TIME_INACT_L 0x31 |
| #define ADXL372_X_THRESH_ACT2_H 0x32 |
| #define ADXL372_X_THRESH_ACT2_L 0x33 |
| #define ADXL372_Y_THRESH_ACT2_H 0x34 |
| #define ADXL372_Y_THRESH_ACT2_L 0x35 |
| #define ADXL372_Z_THRESH_ACT2_H 0x36 |
| #define ADXL372_Z_THRESH_ACT2_L 0x37 |
| #define ADXL372_HPF 0x38 |
| #define ADXL372_FIFO_SAMPLES 0x39 |
| #define ADXL372_FIFO_CTL 0x3A |
| #define ADXL372_INT1_MAP 0x3B |
| #define ADXL372_INT2_MAP 0x3C |
| #define ADXL372_TIMING 0x3D |
| #define ADXL372_MEASURE 0x3E |
| #define ADXL372_POWER_CTL 0x3F |
| #define ADXL372_SELF_TEST 0x40 |
| #define ADXL372_RESET 0x41 |
| #define ADXL372_FIFO_DATA 0x42 |
| |
| #define ADXL372_DEVID_VAL 0xAD |
| #define ADXL372_PARTID_VAL 0xFA |
| #define ADXL372_RESET_CODE 0x52 |
| |
| /* ADXL372_POWER_CTL */ |
| #define ADXL372_POWER_CTL_MODE_MSK GENMASK_ULL(1, 0) |
| #define ADXL372_POWER_CTL_MODE(x) (((x) & 0x3) << 0) |
| |
| /* ADXL372_MEASURE */ |
| #define ADXL372_MEASURE_LINKLOOP_MSK GENMASK_ULL(5, 4) |
| #define ADXL372_MEASURE_LINKLOOP_MODE(x) (((x) & 0x3) << 4) |
| #define ADXL372_MEASURE_BANDWIDTH_MSK GENMASK_ULL(2, 0) |
| #define ADXL372_MEASURE_BANDWIDTH_MODE(x) (((x) & 0x7) << 0) |
| |
| /* ADXL372_TIMING */ |
| #define ADXL372_TIMING_ODR_MSK GENMASK_ULL(7, 5) |
| #define ADXL372_TIMING_ODR_MODE(x) (((x) & 0x7) << 5) |
| |
| /* ADXL372_FIFO_CTL */ |
| #define ADXL372_FIFO_CTL_FORMAT_MSK GENMASK(5, 3) |
| #define ADXL372_FIFO_CTL_FORMAT_MODE(x) (((x) & 0x7) << 3) |
| #define ADXL372_FIFO_CTL_MODE_MSK GENMASK(2, 1) |
| #define ADXL372_FIFO_CTL_MODE_MODE(x) (((x) & 0x3) << 1) |
| #define ADXL372_FIFO_CTL_SAMPLES_MSK BIT(1) |
| #define ADXL372_FIFO_CTL_SAMPLES_MODE(x) (((x) > 0xFF) ? 1 : 0) |
| |
| /* ADXL372_STATUS_1 */ |
| #define ADXL372_STATUS_1_DATA_RDY(x) (((x) >> 0) & 0x1) |
| #define ADXL372_STATUS_1_FIFO_RDY(x) (((x) >> 1) & 0x1) |
| #define ADXL372_STATUS_1_FIFO_FULL(x) (((x) >> 2) & 0x1) |
| #define ADXL372_STATUS_1_FIFO_OVR(x) (((x) >> 3) & 0x1) |
| #define ADXL372_STATUS_1_USR_NVM_BUSY(x) (((x) >> 5) & 0x1) |
| #define ADXL372_STATUS_1_AWAKE(x) (((x) >> 6) & 0x1) |
| #define ADXL372_STATUS_1_ERR_USR_REGS(x) (((x) >> 7) & 0x1) |
| |
| /* ADXL372_INT1_MAP */ |
| #define ADXL372_INT1_MAP_DATA_RDY_MSK BIT(0) |
| #define ADXL372_INT1_MAP_DATA_RDY_MODE(x) (((x) & 0x1) << 0) |
| #define ADXL372_INT1_MAP_FIFO_RDY_MSK BIT(1) |
| #define ADXL372_INT1_MAP_FIFO_RDY_MODE(x) (((x) & 0x1) << 1) |
| #define ADXL372_INT1_MAP_FIFO_FULL_MSK BIT(2) |
| #define ADXL372_INT1_MAP_FIFO_FULL_MODE(x) (((x) & 0x1) << 2) |
| #define ADXL372_INT1_MAP_FIFO_OVR_MSK BIT(3) |
| #define ADXL372_INT1_MAP_FIFO_OVR_MODE(x) (((x) & 0x1) << 3) |
| #define ADXL372_INT1_MAP_INACT_MSK BIT(4) |
| #define ADXL372_INT1_MAP_INACT_MODE(x) (((x) & 0x1) << 4) |
| #define ADXL372_INT1_MAP_ACT_MSK BIT(5) |
| #define ADXL372_INT1_MAP_ACT_MODE(x) (((x) & 0x1) << 5) |
| #define ADXL372_INT1_MAP_AWAKE_MSK BIT(6) |
| #define ADXL372_INT1_MAP_AWAKE_MODE(x) (((x) & 0x1) << 6) |
| #define ADXL372_INT1_MAP_LOW_MSK BIT(7) |
| #define ADXL372_INT1_MAP_LOW_MODE(x) (((x) & 0x1) << 7) |
| |
| /* The ADXL372 includes a deep, 512 sample FIFO buffer */ |
| #define ADXL372_FIFO_SIZE 512 |
| |
| /* |
| * At +/- 200g with 12-bit resolution, scale is computed as: |
| * (200 + 200) * 9.81 / (2^12 - 1) = 0.958241 |
| */ |
| #define ADXL372_USCALE 958241 |
| |
| enum adxl372_op_mode { |
| ADXL372_STANDBY, |
| ADXL372_WAKE_UP, |
| ADXL372_INSTANT_ON, |
| ADXL372_FULL_BW_MEASUREMENT, |
| }; |
| |
| enum adxl372_act_proc_mode { |
| ADXL372_DEFAULT, |
| ADXL372_LINKED, |
| ADXL372_LOOPED, |
| }; |
| |
| enum adxl372_th_activity { |
| ADXL372_ACTIVITY, |
| ADXL372_ACTIVITY2, |
| ADXL372_INACTIVITY, |
| }; |
| |
| enum adxl372_odr { |
| ADXL372_ODR_400HZ, |
| ADXL372_ODR_800HZ, |
| ADXL372_ODR_1600HZ, |
| ADXL372_ODR_3200HZ, |
| ADXL372_ODR_6400HZ, |
| }; |
| |
| enum adxl372_bandwidth { |
| ADXL372_BW_200HZ, |
| ADXL372_BW_400HZ, |
| ADXL372_BW_800HZ, |
| ADXL372_BW_1600HZ, |
| ADXL372_BW_3200HZ, |
| }; |
| |
| static const unsigned int adxl372_th_reg_high_addr[3] = { |
| [ADXL372_ACTIVITY] = ADXL372_X_THRESH_ACT_H, |
| [ADXL372_ACTIVITY2] = ADXL372_X_THRESH_ACT2_H, |
| [ADXL372_INACTIVITY] = ADXL372_X_THRESH_INACT_H, |
| }; |
| |
| enum adxl372_fifo_format { |
| ADXL372_XYZ_FIFO, |
| ADXL372_X_FIFO, |
| ADXL372_Y_FIFO, |
| ADXL372_XY_FIFO, |
| ADXL372_Z_FIFO, |
| ADXL372_XZ_FIFO, |
| ADXL372_YZ_FIFO, |
| ADXL372_XYZ_PEAK_FIFO, |
| }; |
| |
| enum adxl372_fifo_mode { |
| ADXL372_FIFO_BYPASSED, |
| ADXL372_FIFO_STREAMED, |
| ADXL372_FIFO_TRIGGERED, |
| ADXL372_FIFO_OLD_SAVED |
| }; |
| |
| static const int adxl372_samp_freq_tbl[5] = { |
| 400, 800, 1600, 3200, 6400, |
| }; |
| |
| static const int adxl372_bw_freq_tbl[5] = { |
| 200, 400, 800, 1600, 3200, |
| }; |
| |
| struct adxl372_axis_lookup { |
| unsigned int bits; |
| enum adxl372_fifo_format fifo_format; |
| }; |
| |
| static const struct adxl372_axis_lookup adxl372_axis_lookup_table[] = { |
| { BIT(0), ADXL372_X_FIFO }, |
| { BIT(1), ADXL372_Y_FIFO }, |
| { BIT(2), ADXL372_Z_FIFO }, |
| { BIT(0) | BIT(1), ADXL372_XY_FIFO }, |
| { BIT(0) | BIT(2), ADXL372_XZ_FIFO }, |
| { BIT(1) | BIT(2), ADXL372_YZ_FIFO }, |
| { BIT(0) | BIT(1) | BIT(2), ADXL372_XYZ_FIFO }, |
| }; |
| |
| #define ADXL372_ACCEL_CHANNEL(index, reg, axis) { \ |
| .type = IIO_ACCEL, \ |
| .address = reg, \ |
| .modified = 1, \ |
| .channel2 = IIO_MOD_##axis, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ |
| BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ |
| .scan_index = index, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| .shift = 4, \ |
| }, \ |
| } |
| |
| static const struct iio_chan_spec adxl372_channels[] = { |
| ADXL372_ACCEL_CHANNEL(0, ADXL372_X_DATA_H, X), |
| ADXL372_ACCEL_CHANNEL(1, ADXL372_Y_DATA_H, Y), |
| ADXL372_ACCEL_CHANNEL(2, ADXL372_Z_DATA_H, Z), |
| }; |
| |
| struct adxl372_state { |
| int irq; |
| struct device *dev; |
| struct regmap *regmap; |
| struct iio_trigger *dready_trig; |
| enum adxl372_fifo_mode fifo_mode; |
| enum adxl372_fifo_format fifo_format; |
| enum adxl372_op_mode op_mode; |
| enum adxl372_act_proc_mode act_proc_mode; |
| enum adxl372_odr odr; |
| enum adxl372_bandwidth bw; |
| u32 act_time_ms; |
| u32 inact_time_ms; |
| u8 fifo_set_size; |
| u8 int1_bitmask; |
| u8 int2_bitmask; |
| u16 watermark; |
| __be16 fifo_buf[ADXL372_FIFO_SIZE]; |
| }; |
| |
| static const unsigned long adxl372_channel_masks[] = { |
| BIT(0), BIT(1), BIT(2), |
| BIT(0) | BIT(1), |
| BIT(0) | BIT(2), |
| BIT(1) | BIT(2), |
| BIT(0) | BIT(1) | BIT(2), |
| 0 |
| }; |
| |
| static int adxl372_read_axis(struct adxl372_state *st, u8 addr) |
| { |
| __be16 regval; |
| int ret; |
| |
| ret = regmap_bulk_read(st->regmap, addr, ®val, sizeof(regval)); |
| if (ret < 0) |
| return ret; |
| |
| return be16_to_cpu(regval); |
| } |
| |
| static int adxl372_set_op_mode(struct adxl372_state *st, |
| enum adxl372_op_mode op_mode) |
| { |
| int ret; |
| |
| ret = regmap_update_bits(st->regmap, ADXL372_POWER_CTL, |
| ADXL372_POWER_CTL_MODE_MSK, |
| ADXL372_POWER_CTL_MODE(op_mode)); |
| if (ret < 0) |
| return ret; |
| |
| st->op_mode = op_mode; |
| |
| return ret; |
| } |
| |
| static int adxl372_set_odr(struct adxl372_state *st, |
| enum adxl372_odr odr) |
| { |
| int ret; |
| |
| ret = regmap_update_bits(st->regmap, ADXL372_TIMING, |
| ADXL372_TIMING_ODR_MSK, |
| ADXL372_TIMING_ODR_MODE(odr)); |
| if (ret < 0) |
| return ret; |
| |
| st->odr = odr; |
| |
| return ret; |
| } |
| |
| static int adxl372_find_closest_match(const int *array, |
| unsigned int size, int val) |
| { |
| int i; |
| |
| for (i = 0; i < size; i++) { |
| if (val <= array[i]) |
| return i; |
| } |
| |
| return size - 1; |
| } |
| |
| static int adxl372_set_bandwidth(struct adxl372_state *st, |
| enum adxl372_bandwidth bw) |
| { |
| int ret; |
| |
| ret = regmap_update_bits(st->regmap, ADXL372_MEASURE, |
| ADXL372_MEASURE_BANDWIDTH_MSK, |
| ADXL372_MEASURE_BANDWIDTH_MODE(bw)); |
| if (ret < 0) |
| return ret; |
| |
| st->bw = bw; |
| |
| return ret; |
| } |
| |
| static int adxl372_set_act_proc_mode(struct adxl372_state *st, |
| enum adxl372_act_proc_mode mode) |
| { |
| int ret; |
| |
| ret = regmap_update_bits(st->regmap, |
| ADXL372_MEASURE, |
| ADXL372_MEASURE_LINKLOOP_MSK, |
| ADXL372_MEASURE_LINKLOOP_MODE(mode)); |
| if (ret < 0) |
| return ret; |
| |
| st->act_proc_mode = mode; |
| |
| return ret; |
| } |
| |
| static int adxl372_set_activity_threshold(struct adxl372_state *st, |
| enum adxl372_th_activity act, |
| bool ref_en, bool enable, |
| unsigned int threshold) |
| { |
| unsigned char buf[6]; |
| unsigned char th_reg_high_val, th_reg_low_val, th_reg_high_addr; |
| |
| /* scale factor is 100 mg/code */ |
| th_reg_high_val = (threshold / 100) >> 3; |
| th_reg_low_val = ((threshold / 100) << 5) | (ref_en << 1) | enable; |
| th_reg_high_addr = adxl372_th_reg_high_addr[act]; |
| |
| buf[0] = th_reg_high_val; |
| buf[1] = th_reg_low_val; |
| buf[2] = th_reg_high_val; |
| buf[3] = th_reg_low_val; |
| buf[4] = th_reg_high_val; |
| buf[5] = th_reg_low_val; |
| |
| return regmap_bulk_write(st->regmap, th_reg_high_addr, |
| buf, ARRAY_SIZE(buf)); |
| } |
| |
| static int adxl372_set_activity_time_ms(struct adxl372_state *st, |
| unsigned int act_time_ms) |
| { |
| unsigned int reg_val, scale_factor; |
| int ret; |
| |
| /* |
| * 3.3 ms per code is the scale factor of the TIME_ACT register for |
| * ODR = 6400 Hz. It is 6.6 ms per code for ODR = 3200 Hz and below. |
| */ |
| if (st->odr == ADXL372_ODR_6400HZ) |
| scale_factor = 3300; |
| else |
| scale_factor = 6600; |
| |
| reg_val = DIV_ROUND_CLOSEST(act_time_ms * 1000, scale_factor); |
| |
| /* TIME_ACT register is 8 bits wide */ |
| if (reg_val > 0xFF) |
| reg_val = 0xFF; |
| |
| ret = regmap_write(st->regmap, ADXL372_TIME_ACT, reg_val); |
| if (ret < 0) |
| return ret; |
| |
| st->act_time_ms = act_time_ms; |
| |
| return ret; |
| } |
| |
| static int adxl372_set_inactivity_time_ms(struct adxl372_state *st, |
| unsigned int inact_time_ms) |
| { |
| unsigned int reg_val_h, reg_val_l, res, scale_factor; |
| int ret; |
| |
| /* |
| * 13 ms per code is the scale factor of the TIME_INACT register for |
| * ODR = 6400 Hz. It is 26 ms per code for ODR = 3200 Hz and below. |
| */ |
| if (st->odr == ADXL372_ODR_6400HZ) |
| scale_factor = 13; |
| else |
| scale_factor = 26; |
| |
| res = DIV_ROUND_CLOSEST(inact_time_ms, scale_factor); |
| reg_val_h = (res >> 8) & 0xFF; |
| reg_val_l = res & 0xFF; |
| |
| ret = regmap_write(st->regmap, ADXL372_TIME_INACT_H, reg_val_h); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_write(st->regmap, ADXL372_TIME_INACT_L, reg_val_l); |
| if (ret < 0) |
| return ret; |
| |
| st->inact_time_ms = inact_time_ms; |
| |
| return ret; |
| } |
| |
| static int adxl372_set_interrupts(struct adxl372_state *st, |
| unsigned char int1_bitmask, |
| unsigned char int2_bitmask) |
| { |
| int ret; |
| |
| ret = regmap_write(st->regmap, ADXL372_INT1_MAP, int1_bitmask); |
| if (ret < 0) |
| return ret; |
| |
| return regmap_write(st->regmap, ADXL372_INT2_MAP, int2_bitmask); |
| } |
| |
| static int adxl372_configure_fifo(struct adxl372_state *st) |
| { |
| unsigned int fifo_samples, fifo_ctl; |
| int ret; |
| |
| /* FIFO must be configured while in standby mode */ |
| ret = adxl372_set_op_mode(st, ADXL372_STANDBY); |
| if (ret < 0) |
| return ret; |
| |
| fifo_samples = st->watermark & 0xFF; |
| fifo_ctl = ADXL372_FIFO_CTL_FORMAT_MODE(st->fifo_format) | |
| ADXL372_FIFO_CTL_MODE_MODE(st->fifo_mode) | |
| ADXL372_FIFO_CTL_SAMPLES_MODE(st->watermark); |
| |
| ret = regmap_write(st->regmap, ADXL372_FIFO_SAMPLES, fifo_samples); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_write(st->regmap, ADXL372_FIFO_CTL, fifo_ctl); |
| if (ret < 0) |
| return ret; |
| |
| return adxl372_set_op_mode(st, ADXL372_FULL_BW_MEASUREMENT); |
| } |
| |
| static int adxl372_get_status(struct adxl372_state *st, |
| u8 *status1, u8 *status2, |
| u16 *fifo_entries) |
| { |
| __be32 buf; |
| u32 val; |
| int ret; |
| |
| /* STATUS1, STATUS2, FIFO_ENTRIES2 and FIFO_ENTRIES are adjacent regs */ |
| ret = regmap_bulk_read(st->regmap, ADXL372_STATUS_1, |
| &buf, sizeof(buf)); |
| if (ret < 0) |
| return ret; |
| |
| val = be32_to_cpu(buf); |
| |
| *status1 = (val >> 24) & 0x0F; |
| *status2 = (val >> 16) & 0x0F; |
| /* |
| * FIFO_ENTRIES contains the least significant byte, and FIFO_ENTRIES2 |
| * contains the two most significant bits |
| */ |
| *fifo_entries = val & 0x3FF; |
| |
| return ret; |
| } |
| |
| static irqreturn_t adxl372_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct adxl372_state *st = iio_priv(indio_dev); |
| u8 status1, status2; |
| u16 fifo_entries; |
| int i, ret; |
| |
| ret = adxl372_get_status(st, &status1, &status2, &fifo_entries); |
| if (ret < 0) |
| goto err; |
| |
| if (st->fifo_mode != ADXL372_FIFO_BYPASSED && |
| ADXL372_STATUS_1_FIFO_FULL(status1)) { |
| /* |
| * When reading data from multiple axes from the FIFO, |
| * to ensure that data is not overwritten and stored out |
| * of order at least one sample set must be left in the |
| * FIFO after every read. |
| */ |
| fifo_entries -= st->fifo_set_size; |
| |
| /* Read data from the FIFO */ |
| ret = regmap_noinc_read(st->regmap, ADXL372_FIFO_DATA, |
| st->fifo_buf, |
| fifo_entries * sizeof(u16)); |
| if (ret < 0) |
| goto err; |
| |
| /* Each sample is 2 bytes */ |
| for (i = 0; i < fifo_entries * sizeof(u16); |
| i += st->fifo_set_size * sizeof(u16)) |
| iio_push_to_buffers(indio_dev, &st->fifo_buf[i]); |
| } |
| err: |
| iio_trigger_notify_done(indio_dev->trig); |
| return IRQ_HANDLED; |
| } |
| |
| static int adxl372_setup(struct adxl372_state *st) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(st->regmap, ADXL372_DEVID, ®val); |
| if (ret < 0) |
| return ret; |
| |
| if (regval != ADXL372_DEVID_VAL) { |
| dev_err(st->dev, "Invalid chip id %x\n", regval); |
| return -ENODEV; |
| } |
| |
| ret = adxl372_set_op_mode(st, ADXL372_STANDBY); |
| if (ret < 0) |
| return ret; |
| |
| /* Set threshold for activity detection to 1g */ |
| ret = adxl372_set_activity_threshold(st, ADXL372_ACTIVITY, |
| true, true, 1000); |
| if (ret < 0) |
| return ret; |
| |
| /* Set threshold for inactivity detection to 100mg */ |
| ret = adxl372_set_activity_threshold(st, ADXL372_INACTIVITY, |
| true, true, 100); |
| if (ret < 0) |
| return ret; |
| |
| /* Set activity processing in Looped mode */ |
| ret = adxl372_set_act_proc_mode(st, ADXL372_LOOPED); |
| if (ret < 0) |
| return ret; |
| |
| ret = adxl372_set_odr(st, ADXL372_ODR_6400HZ); |
| if (ret < 0) |
| return ret; |
| |
| ret = adxl372_set_bandwidth(st, ADXL372_BW_3200HZ); |
| if (ret < 0) |
| return ret; |
| |
| /* Set activity timer to 1ms */ |
| ret = adxl372_set_activity_time_ms(st, 1); |
| if (ret < 0) |
| return ret; |
| |
| /* Set inactivity timer to 10s */ |
| ret = adxl372_set_inactivity_time_ms(st, 10000); |
| if (ret < 0) |
| return ret; |
| |
| /* Set the mode of operation to full bandwidth measurement mode */ |
| return adxl372_set_op_mode(st, ADXL372_FULL_BW_MEASUREMENT); |
| } |
| |
| static int adxl372_reg_access(struct iio_dev *indio_dev, |
| unsigned int reg, |
| unsigned int writeval, |
| unsigned int *readval) |
| { |
| struct adxl372_state *st = iio_priv(indio_dev); |
| |
| if (readval) |
| return regmap_read(st->regmap, reg, readval); |
| else |
| return regmap_write(st->regmap, reg, writeval); |
| } |
| |
| static int adxl372_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long info) |
| { |
| struct adxl372_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| switch (info) { |
| case IIO_CHAN_INFO_RAW: |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| |
| ret = adxl372_read_axis(st, chan->address); |
| iio_device_release_direct_mode(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| *val = sign_extend32(ret >> chan->scan_type.shift, |
| chan->scan_type.realbits - 1); |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| *val = 0; |
| *val2 = ADXL372_USCALE; |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| *val = adxl372_samp_freq_tbl[st->odr]; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: |
| *val = adxl372_bw_freq_tbl[st->bw]; |
| return IIO_VAL_INT; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int adxl372_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long info) |
| { |
| struct adxl372_state *st = iio_priv(indio_dev); |
| int odr_index, bw_index, ret; |
| |
| switch (info) { |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| odr_index = adxl372_find_closest_match(adxl372_samp_freq_tbl, |
| ARRAY_SIZE(adxl372_samp_freq_tbl), |
| val); |
| ret = adxl372_set_odr(st, odr_index); |
| if (ret < 0) |
| return ret; |
| /* |
| * The timer period depends on the ODR selected. |
| * At 3200 Hz and below, it is 6.6 ms; at 6400 Hz, it is 3.3 ms |
| */ |
| ret = adxl372_set_activity_time_ms(st, st->act_time_ms); |
| if (ret < 0) |
| return ret; |
| /* |
| * The timer period depends on the ODR selected. |
| * At 3200 Hz and below, it is 26 ms; at 6400 Hz, it is 13 ms |
| */ |
| ret = adxl372_set_inactivity_time_ms(st, st->inact_time_ms); |
| if (ret < 0) |
| return ret; |
| /* |
| * The maximum bandwidth is constrained to at most half of |
| * the ODR to ensure that the Nyquist criteria is not violated |
| */ |
| if (st->bw > odr_index) |
| ret = adxl372_set_bandwidth(st, odr_index); |
| |
| return ret; |
| case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: |
| bw_index = adxl372_find_closest_match(adxl372_bw_freq_tbl, |
| ARRAY_SIZE(adxl372_bw_freq_tbl), |
| val); |
| return adxl372_set_bandwidth(st, bw_index); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static ssize_t adxl372_show_filter_freq_avail(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); |
| struct adxl372_state *st = iio_priv(indio_dev); |
| int i; |
| size_t len = 0; |
| |
| for (i = 0; i <= st->odr; i++) |
| len += scnprintf(buf + len, PAGE_SIZE - len, |
| "%d ", adxl372_bw_freq_tbl[i]); |
| |
| buf[len - 1] = '\n'; |
| |
| return len; |
| } |
| |
| static ssize_t adxl372_get_fifo_enabled(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); |
| struct adxl372_state *st = iio_priv(indio_dev); |
| |
| return sprintf(buf, "%d\n", st->fifo_mode); |
| } |
| |
| static ssize_t adxl372_get_fifo_watermark(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); |
| struct adxl372_state *st = iio_priv(indio_dev); |
| |
| return sprintf(buf, "%d\n", st->watermark); |
| } |
| |
| static IIO_CONST_ATTR(hwfifo_watermark_min, "1"); |
| static IIO_CONST_ATTR(hwfifo_watermark_max, |
| __stringify(ADXL372_FIFO_SIZE)); |
| static IIO_DEVICE_ATTR(hwfifo_watermark, 0444, |
| adxl372_get_fifo_watermark, NULL, 0); |
| static IIO_DEVICE_ATTR(hwfifo_enabled, 0444, |
| adxl372_get_fifo_enabled, NULL, 0); |
| |
| static const struct attribute *adxl372_fifo_attributes[] = { |
| &iio_const_attr_hwfifo_watermark_min.dev_attr.attr, |
| &iio_const_attr_hwfifo_watermark_max.dev_attr.attr, |
| &iio_dev_attr_hwfifo_watermark.dev_attr.attr, |
| &iio_dev_attr_hwfifo_enabled.dev_attr.attr, |
| NULL, |
| }; |
| |
| static int adxl372_set_watermark(struct iio_dev *indio_dev, unsigned int val) |
| { |
| struct adxl372_state *st = iio_priv(indio_dev); |
| |
| if (val > ADXL372_FIFO_SIZE) |
| val = ADXL372_FIFO_SIZE; |
| |
| st->watermark = val; |
| |
| return 0; |
| } |
| |
| static int adxl372_buffer_postenable(struct iio_dev *indio_dev) |
| { |
| struct adxl372_state *st = iio_priv(indio_dev); |
| unsigned int mask; |
| int i, ret; |
| |
| ret = adxl372_set_interrupts(st, ADXL372_INT1_MAP_FIFO_FULL_MSK, 0); |
| if (ret < 0) |
| return ret; |
| |
| mask = *indio_dev->active_scan_mask; |
| |
| for (i = 0; i < ARRAY_SIZE(adxl372_axis_lookup_table); i++) { |
| if (mask == adxl372_axis_lookup_table[i].bits) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(adxl372_axis_lookup_table)) |
| return -EINVAL; |
| |
| st->fifo_format = adxl372_axis_lookup_table[i].fifo_format; |
| st->fifo_set_size = bitmap_weight(indio_dev->active_scan_mask, |
| indio_dev->masklength); |
| /* |
| * The 512 FIFO samples can be allotted in several ways, such as: |
| * 170 sample sets of concurrent 3-axis data |
| * 256 sample sets of concurrent 2-axis data (user selectable) |
| * 512 sample sets of single-axis data |
| */ |
| if ((st->watermark * st->fifo_set_size) > ADXL372_FIFO_SIZE) |
| st->watermark = (ADXL372_FIFO_SIZE / st->fifo_set_size); |
| |
| st->fifo_mode = ADXL372_FIFO_STREAMED; |
| |
| ret = adxl372_configure_fifo(st); |
| if (ret < 0) { |
| st->fifo_mode = ADXL372_FIFO_BYPASSED; |
| adxl372_set_interrupts(st, 0, 0); |
| return ret; |
| } |
| |
| return iio_triggered_buffer_postenable(indio_dev); |
| } |
| |
| static int adxl372_buffer_predisable(struct iio_dev *indio_dev) |
| { |
| struct adxl372_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| ret = iio_triggered_buffer_predisable(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| adxl372_set_interrupts(st, 0, 0); |
| st->fifo_mode = ADXL372_FIFO_BYPASSED; |
| adxl372_configure_fifo(st); |
| |
| return 0; |
| } |
| |
| static const struct iio_buffer_setup_ops adxl372_buffer_ops = { |
| .postenable = adxl372_buffer_postenable, |
| .predisable = adxl372_buffer_predisable, |
| }; |
| |
| static int adxl372_dready_trig_set_state(struct iio_trigger *trig, |
| bool state) |
| { |
| struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); |
| struct adxl372_state *st = iio_priv(indio_dev); |
| unsigned long int mask = 0; |
| |
| if (state) |
| mask = ADXL372_INT1_MAP_FIFO_FULL_MSK; |
| |
| return adxl372_set_interrupts(st, mask, 0); |
| } |
| |
| static int adxl372_validate_trigger(struct iio_dev *indio_dev, |
| struct iio_trigger *trig) |
| { |
| struct adxl372_state *st = iio_priv(indio_dev); |
| |
| if (st->dready_trig != trig) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static const struct iio_trigger_ops adxl372_trigger_ops = { |
| .validate_device = &iio_trigger_validate_own_device, |
| .set_trigger_state = adxl372_dready_trig_set_state, |
| }; |
| |
| static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("400 800 1600 3200 6400"); |
| static IIO_DEVICE_ATTR(in_accel_filter_low_pass_3db_frequency_available, |
| 0444, adxl372_show_filter_freq_avail, NULL, 0); |
| |
| static struct attribute *adxl372_attributes[] = { |
| &iio_const_attr_sampling_frequency_available.dev_attr.attr, |
| &iio_dev_attr_in_accel_filter_low_pass_3db_frequency_available.dev_attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group adxl372_attrs_group = { |
| .attrs = adxl372_attributes, |
| }; |
| |
| static const struct iio_info adxl372_info = { |
| .validate_trigger = &adxl372_validate_trigger, |
| .attrs = &adxl372_attrs_group, |
| .read_raw = adxl372_read_raw, |
| .write_raw = adxl372_write_raw, |
| .debugfs_reg_access = &adxl372_reg_access, |
| .hwfifo_set_watermark = adxl372_set_watermark, |
| }; |
| |
| bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg) |
| { |
| return (reg == ADXL372_FIFO_DATA); |
| } |
| EXPORT_SYMBOL_GPL(adxl372_readable_noinc_reg); |
| |
| int adxl372_probe(struct device *dev, struct regmap *regmap, |
| int irq, const char *name) |
| { |
| struct iio_dev *indio_dev; |
| struct adxl372_state *st; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| dev_set_drvdata(dev, indio_dev); |
| |
| st->dev = dev; |
| st->regmap = regmap; |
| st->irq = irq; |
| |
| indio_dev->channels = adxl372_channels; |
| indio_dev->num_channels = ARRAY_SIZE(adxl372_channels); |
| indio_dev->available_scan_masks = adxl372_channel_masks; |
| indio_dev->dev.parent = dev; |
| indio_dev->name = name; |
| indio_dev->info = &adxl372_info; |
| indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; |
| |
| ret = adxl372_setup(st); |
| if (ret < 0) { |
| dev_err(dev, "ADXL372 setup failed\n"); |
| return ret; |
| } |
| |
| ret = devm_iio_triggered_buffer_setup(dev, |
| indio_dev, NULL, |
| adxl372_trigger_handler, |
| &adxl372_buffer_ops); |
| if (ret < 0) |
| return ret; |
| |
| iio_buffer_set_attrs(indio_dev->buffer, adxl372_fifo_attributes); |
| |
| if (st->irq) { |
| st->dready_trig = devm_iio_trigger_alloc(dev, |
| "%s-dev%d", |
| indio_dev->name, |
| indio_dev->id); |
| if (st->dready_trig == NULL) |
| return -ENOMEM; |
| |
| st->dready_trig->ops = &adxl372_trigger_ops; |
| st->dready_trig->dev.parent = dev; |
| iio_trigger_set_drvdata(st->dready_trig, indio_dev); |
| ret = devm_iio_trigger_register(dev, st->dready_trig); |
| if (ret < 0) |
| return ret; |
| |
| indio_dev->trig = iio_trigger_get(st->dready_trig); |
| |
| ret = devm_request_threaded_irq(dev, st->irq, |
| iio_trigger_generic_data_rdy_poll, |
| NULL, |
| IRQF_TRIGGER_RISING | IRQF_ONESHOT, |
| indio_dev->name, st->dready_trig); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return devm_iio_device_register(dev, indio_dev); |
| } |
| EXPORT_SYMBOL_GPL(adxl372_probe); |
| |
| MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>"); |
| MODULE_DESCRIPTION("Analog Devices ADXL372 3-axis accelerometer driver"); |
| MODULE_LICENSE("GPL"); |