i2c: muxes: pca954x: Allow sharing reset GPIO
Some hardware designs with multiple PCA954x devices use a reset GPIO
connected to all the muxes. Support this configuration by making use of
the reset controller framework which can deal with the shared reset
GPIOs. Fall back to the old GPIO descriptor method if the reset
controller framework is not enabled.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index f5dfc33..c3f4ff0 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -49,6 +49,7 @@
#include <linux/pm.h>
#include <linux/property.h>
#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <dt-bindings/mux/mux.h>
@@ -116,6 +117,9 @@
unsigned int irq_mask;
raw_spinlock_t lock;
struct regulator *supply;
+
+ struct gpio_desc *reset_gpio;
+ struct reset_control *reset_cont;
};
/* Provide specs for the MAX735x, PCA954x and PCA984x types we know about */
@@ -518,6 +522,35 @@
return ret;
}
+static int pca954x_get_reset(struct device *dev, struct pca954x *data)
+{
+ data->reset_cont = devm_reset_control_get_optional_shared(dev, NULL);
+ if (IS_ERR(data->reset_cont))
+ return dev_err_probe(dev, PTR_ERR(data->reset_cont),
+ "Failed to get reset\n");
+ else if (data->reset_cont)
+ return 0;
+
+ /*
+ * fallback to legacy reset-gpios
+ */
+ data->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(data->reset_gpio)) {
+ return dev_err_probe(dev, PTR_ERR(data->reset_gpio),
+ "Failed to get reset gpio");
+ }
+
+ return 0;
+}
+
+static void pca954x_reset_deassert(struct pca954x *data)
+{
+ if (data->reset_cont)
+ reset_control_deassert(data->reset_cont);
+ else
+ gpiod_set_value_cansleep(data->reset_gpio, 0);
+}
+
/*
* I2C init/probing/exit functions
*/
@@ -526,7 +559,6 @@
const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct i2c_adapter *adap = client->adapter;
struct device *dev = &client->dev;
- struct gpio_desc *gpio;
struct i2c_mux_core *muxc;
struct pca954x *data;
int num;
@@ -554,15 +586,13 @@
return dev_err_probe(dev, ret,
"Failed to enable vdd supply\n");
- /* Reset the mux if a reset GPIO is specified. */
- gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
- if (IS_ERR(gpio)) {
- ret = PTR_ERR(gpio);
+ ret = pca954x_get_reset(dev, data);
+ if (ret)
goto fail_cleanup;
- }
- if (gpio) {
+
+ if (data->reset_cont || data->reset_gpio) {
udelay(1);
- gpiod_set_value_cansleep(gpio, 0);
+ pca954x_reset_deassert(data);
/* Give the chip some time to recover. */
udelay(1);
}
