| /* |
| * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> |
| * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> |
| * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> |
| * |
| * Permission to use, copy, modify, and distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| * |
| */ |
| |
| /**************\ |
| * Capabilities * |
| \**************/ |
| |
| #include "ath5k.h" |
| #include "reg.h" |
| #include "debug.h" |
| #include "base.h" |
| |
| /* |
| * Fill the capabilities struct |
| * TODO: Merge this with EEPROM code when we are done with it |
| */ |
| int ath5k_hw_set_capabilities(struct ath5k_hw *ah) |
| { |
| u16 ee_header; |
| |
| ATH5K_TRACE(ah->ah_sc); |
| /* Capabilities stored in the EEPROM */ |
| ee_header = ah->ah_capabilities.cap_eeprom.ee_header; |
| |
| if (ah->ah_version == AR5K_AR5210) { |
| /* |
| * Set radio capabilities |
| * (The AR5110 only supports the middle 5GHz band) |
| */ |
| ah->ah_capabilities.cap_range.range_5ghz_min = 5120; |
| ah->ah_capabilities.cap_range.range_5ghz_max = 5430; |
| ah->ah_capabilities.cap_range.range_2ghz_min = 0; |
| ah->ah_capabilities.cap_range.range_2ghz_max = 0; |
| |
| /* Set supported modes */ |
| __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode); |
| __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode); |
| } else { |
| /* |
| * XXX The tranceiver supports frequencies from 4920 to 6100GHz |
| * XXX and from 2312 to 2732GHz. There are problems with the |
| * XXX current ieee80211 implementation because the IEEE |
| * XXX channel mapping does not support negative channel |
| * XXX numbers (2312MHz is channel -19). Of course, this |
| * XXX doesn't matter because these channels are out of range |
| * XXX but some regulation domains like MKK (Japan) will |
| * XXX support frequencies somewhere around 4.8GHz. |
| */ |
| |
| /* |
| * Set radio capabilities |
| */ |
| |
| if (AR5K_EEPROM_HDR_11A(ee_header)) { |
| /* 4920 */ |
| ah->ah_capabilities.cap_range.range_5ghz_min = 5005; |
| ah->ah_capabilities.cap_range.range_5ghz_max = 6100; |
| |
| /* Set supported modes */ |
| __set_bit(AR5K_MODE_11A, |
| ah->ah_capabilities.cap_mode); |
| __set_bit(AR5K_MODE_11A_TURBO, |
| ah->ah_capabilities.cap_mode); |
| if (ah->ah_version == AR5K_AR5212) |
| __set_bit(AR5K_MODE_11G_TURBO, |
| ah->ah_capabilities.cap_mode); |
| } |
| |
| /* Enable 802.11b if a 2GHz capable radio (2111/5112) is |
| * connected */ |
| if (AR5K_EEPROM_HDR_11B(ee_header) || |
| (AR5K_EEPROM_HDR_11G(ee_header) && |
| ah->ah_version != AR5K_AR5211)) { |
| /* 2312 */ |
| ah->ah_capabilities.cap_range.range_2ghz_min = 2412; |
| ah->ah_capabilities.cap_range.range_2ghz_max = 2732; |
| |
| if (AR5K_EEPROM_HDR_11B(ee_header)) |
| __set_bit(AR5K_MODE_11B, |
| ah->ah_capabilities.cap_mode); |
| |
| if (AR5K_EEPROM_HDR_11G(ee_header) && |
| ah->ah_version != AR5K_AR5211) |
| __set_bit(AR5K_MODE_11G, |
| ah->ah_capabilities.cap_mode); |
| } |
| } |
| |
| /* Set number of supported TX queues */ |
| if (ah->ah_version == AR5K_AR5210) |
| ah->ah_capabilities.cap_queues.q_tx_num = |
| AR5K_NUM_TX_QUEUES_NOQCU; |
| else |
| ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; |
| |
| /* newer hardware has PHY error counters */ |
| if (ah->ah_mac_srev >= AR5K_SREV_AR5213A) |
| ah->ah_capabilities.cap_has_phyerr_counters = true; |
| else |
| ah->ah_capabilities.cap_has_phyerr_counters = false; |
| |
| return 0; |
| } |
| |
| /* Main function used by the driver part to check caps */ |
| int ath5k_hw_get_capability(struct ath5k_hw *ah, |
| enum ath5k_capability_type cap_type, |
| u32 capability, u32 *result) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| |
| switch (cap_type) { |
| case AR5K_CAP_NUM_TXQUEUES: |
| if (result) { |
| if (ah->ah_version == AR5K_AR5210) |
| *result = AR5K_NUM_TX_QUEUES_NOQCU; |
| else |
| *result = AR5K_NUM_TX_QUEUES; |
| goto yes; |
| } |
| case AR5K_CAP_VEOL: |
| goto yes; |
| case AR5K_CAP_COMPRESSION: |
| if (ah->ah_version == AR5K_AR5212) |
| goto yes; |
| else |
| goto no; |
| case AR5K_CAP_BURST: |
| goto yes; |
| case AR5K_CAP_TPC: |
| goto yes; |
| case AR5K_CAP_BSSIDMASK: |
| if (ah->ah_version == AR5K_AR5212) |
| goto yes; |
| else |
| goto no; |
| case AR5K_CAP_XR: |
| if (ah->ah_version == AR5K_AR5212) |
| goto yes; |
| else |
| goto no; |
| default: |
| goto no; |
| } |
| |
| no: |
| return -EINVAL; |
| yes: |
| return 0; |
| } |
| |
| /* |
| * TODO: Following functions should be part of a new function |
| * set_capability |
| */ |
| |
| int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, |
| u16 assoc_id) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| |
| if (ah->ah_version == AR5K_AR5210) { |
| AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, |
| AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); |
| return 0; |
| } |
| |
| return -EIO; |
| } |
| |
| int ath5k_hw_disable_pspoll(struct ath5k_hw *ah) |
| { |
| ATH5K_TRACE(ah->ah_sc); |
| |
| if (ah->ah_version == AR5K_AR5210) { |
| AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, |
| AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); |
| return 0; |
| } |
| |
| return -EIO; |
| } |