| What: /sys/bus/hid/drivers/logitech/<dev>/range |
| Date: July 2011 |
| KernelVersion: 3.2 |
| Contact: Michal Malý <madcatxster@devoid-pointer.net> |
| Description: Display minimum, maximum and current range of the steering |
| wheel. Writing a value within min and max boundaries sets the |
| range of the wheel. |
| |
| What: /sys/bus/hid/drivers/logitech/<dev>/alternate_modes |
| Date: Feb 2015 |
| KernelVersion: 4.1 |
| Contact: Michal Malý <madcatxster@devoid-pointer.net> |
| Description: Displays a set of alternate modes supported by a wheel. Each |
| mode is listed as follows: |
| |
| Tag: Mode Name |
| |
| Currently active mode is marked with an asterisk. List also |
| contains an abstract item "native" which always denotes the |
| native mode of the wheel. Echoing the mode tag switches the |
| wheel into the corresponding mode. Depending on the exact model |
| of the wheel not all listed modes might always be selectable. |
| If a wheel cannot be switched into the desired mode, -EINVAL |
| is returned accompanied with an explanatory message in the |
| kernel log. |
| This entry is not created for devices that have only one mode. |
| |
| Currently supported mode switches: |
| |
| Driving Force Pro:: |
| |
| DF-EX --> DFP |
| |
| G25:: |
| |
| DF-EX --> DFP --> G25 |
| |
| G27:: |
| |
| DF-EX <*> DFP <-> G25 <-> G27 |
| DF-EX <*--------> G25 <-> G27 |
| DF-EX <*----------------> G27 |
| |
| G29:: |
| |
| DF-EX <*> DFP <-> G25 <-> G27 <-> G29 |
| DF-EX <*--------> G25 <-> G27 <-> G29 |
| DF-EX <*----------------> G27 <-> G29 |
| DF-EX <*------------------------> G29 |
| |
| DFGT:: |
| |
| DF-EX <*> DFP <-> DFGT |
| DF-EX <*--------> DFGT |
| |
| * hid_logitech module must be loaded with lg4ff_no_autoswitch=1 |
| parameter set in order for the switch to DF-EX mode to work. |
| |
| What: /sys/bus/hid/drivers/logitech/<dev>/real_id |
| Date: Feb 2015 |
| KernelVersion: 4.1 |
| Contact: Michal Malý <madcatxster@devoid-pointer.net> |
| Description: Displays the real model of the wheel regardless of any |
| alternate mode the wheel might be switched to. |
| It is a read-only value. |
| This entry is not created for devices that have only one mode. |
| |
| What: /sys/bus/hid/drivers/logitech/<dev>/combine_pedals |
| Date: Sep 2016 |
| KernelVersion: 4.9 |
| Contact: Simon Wood <simon@mungewell.org> |
| Description: Controls whether a combined value of accelerator and brake is |
| reported on the Y axis of the controller. Useful for older games |
| which can do not work with separate accelerator/brake axis. |
| Off ('0') by default, enabled by setting '1'. |
