| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * OpenRISC idle.c |
| * |
| * Linux architectural port borrowing liberally from similar works of |
| * others. All original copyrights apply as per the original source |
| * declaration. |
| * |
| * Modifications for the OpenRISC architecture: |
| * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com> |
| * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> |
| */ |
| |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/ptrace.h> |
| #include <linux/mman.h> |
| #include <linux/mm.h> |
| #include <linux/swap.h> |
| #include <linux/smp.h> |
| #include <linux/memblock.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/pagemap.h> |
| |
| #include <asm/pgalloc.h> |
| #include <asm/dma.h> |
| #include <asm/io.h> |
| #include <asm/tlb.h> |
| #include <asm/mmu_context.h> |
| #include <asm/fixmap.h> |
| #include <asm/tlbflush.h> |
| #include <asm/sections.h> |
| |
| int mem_init_done; |
| |
| DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); |
| |
| static void __init zone_sizes_init(void) |
| { |
| unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 }; |
| |
| /* |
| * We use only ZONE_NORMAL |
| */ |
| max_zone_pfn[ZONE_NORMAL] = max_low_pfn; |
| |
| free_area_init(max_zone_pfn); |
| } |
| |
| extern const char _s_kernel_ro[], _e_kernel_ro[]; |
| |
| /* |
| * Map all physical memory into kernel's address space. |
| * |
| * This is explicitly coded for two-level page tables, so if you need |
| * something else then this needs to change. |
| */ |
| static void __init map_ram(void) |
| { |
| phys_addr_t start, end; |
| unsigned long v, p, e; |
| pgprot_t prot; |
| pgd_t *pge; |
| p4d_t *p4e; |
| pud_t *pue; |
| pmd_t *pme; |
| pte_t *pte; |
| u64 i; |
| /* These mark extents of read-only kernel pages... |
| * ...from vmlinux.lds.S |
| */ |
| |
| v = PAGE_OFFSET; |
| |
| for_each_mem_range(i, &start, &end) { |
| p = (u32) start & PAGE_MASK; |
| e = (u32) end; |
| |
| v = (u32) __va(p); |
| pge = pgd_offset_k(v); |
| |
| while (p < e) { |
| int j; |
| p4e = p4d_offset(pge, v); |
| pue = pud_offset(p4e, v); |
| pme = pmd_offset(pue, v); |
| |
| if ((u32) pue != (u32) pge || (u32) pme != (u32) pge) { |
| panic("%s: OR1K kernel hardcoded for " |
| "two-level page tables", |
| __func__); |
| } |
| |
| /* Alloc one page for holding PTE's... */ |
| pte = memblock_alloc_raw(PAGE_SIZE, PAGE_SIZE); |
| if (!pte) |
| panic("%s: Failed to allocate page for PTEs\n", |
| __func__); |
| set_pmd(pme, __pmd(_KERNPG_TABLE + __pa(pte))); |
| |
| /* Fill the newly allocated page with PTE'S */ |
| for (j = 0; p < e && j < PTRS_PER_PTE; |
| v += PAGE_SIZE, p += PAGE_SIZE, j++, pte++) { |
| if (v >= (u32) _e_kernel_ro || |
| v < (u32) _s_kernel_ro) |
| prot = PAGE_KERNEL; |
| else |
| prot = PAGE_KERNEL_RO; |
| |
| set_pte(pte, mk_pte_phys(p, prot)); |
| } |
| |
| pge++; |
| } |
| |
| printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__, |
| start, end); |
| } |
| } |
| |
| void __init paging_init(void) |
| { |
| extern void tlb_init(void); |
| |
| int i; |
| |
| printk(KERN_INFO "Setting up paging and PTEs.\n"); |
| |
| /* clear out the init_mm.pgd that will contain the kernel's mappings */ |
| |
| for (i = 0; i < PTRS_PER_PGD; i++) |
| swapper_pg_dir[i] = __pgd(0); |
| |
| /* make sure the current pgd table points to something sane |
| * (even if it is most probably not used until the next |
| * switch_mm) |
| */ |
| current_pgd[smp_processor_id()] = init_mm.pgd; |
| |
| map_ram(); |
| |
| zone_sizes_init(); |
| |
| /* self modifying code ;) */ |
| /* Since the old TLB miss handler has been running up until now, |
| * the kernel pages are still all RW, so we can still modify the |
| * text directly... after this change and a TLB flush, the kernel |
| * pages will become RO. |
| */ |
| { |
| extern unsigned long dtlb_miss_handler; |
| extern unsigned long itlb_miss_handler; |
| |
| unsigned long *dtlb_vector = __va(0x900); |
| unsigned long *itlb_vector = __va(0xa00); |
| |
| printk(KERN_INFO "itlb_miss_handler %p\n", &itlb_miss_handler); |
| *itlb_vector = ((unsigned long)&itlb_miss_handler - |
| (unsigned long)itlb_vector) >> 2; |
| |
| /* Soft ordering constraint to ensure that dtlb_vector is |
| * the last thing updated |
| */ |
| barrier(); |
| |
| printk(KERN_INFO "dtlb_miss_handler %p\n", &dtlb_miss_handler); |
| *dtlb_vector = ((unsigned long)&dtlb_miss_handler - |
| (unsigned long)dtlb_vector) >> 2; |
| |
| } |
| |
| /* Soft ordering constraint to ensure that cache invalidation and |
| * TLB flush really happen _after_ code has been modified. |
| */ |
| barrier(); |
| |
| /* Invalidate instruction caches after code modification */ |
| mtspr(SPR_ICBIR, 0x900); |
| mtspr(SPR_ICBIR, 0xa00); |
| |
| /* New TLB miss handlers and kernel page tables are in now place. |
| * Make sure that page flags get updated for all pages in TLB by |
| * flushing the TLB and forcing all TLB entries to be recreated |
| * from their page table flags. |
| */ |
| flush_tlb_all(); |
| } |
| |
| /* References to section boundaries */ |
| |
| void __init mem_init(void) |
| { |
| BUG_ON(!mem_map); |
| |
| max_mapnr = max_low_pfn; |
| high_memory = (void *)__va(max_low_pfn * PAGE_SIZE); |
| |
| /* clear the zero-page */ |
| memset((void *)empty_zero_page, 0, PAGE_SIZE); |
| |
| /* this will put all low memory onto the freelists */ |
| memblock_free_all(); |
| |
| printk("mem_init_done ...........................................\n"); |
| mem_init_done = 1; |
| return; |
| } |