arch/x86/include/uapi/asm/bootparam.h - linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
 #ifndef _ASM_X86_BOOTPARAM_H
 #define _ASM_X86_BOOTPARAM_H

 /* setup_data/setup_indirect types */
 #define SETUP_NONE			0
 #define SETUP_E820_EXT			1
 #define SETUP_DTB			2
 #define SETUP_PCI			3
 #define SETUP_EFI			4
 #define SETUP_APPLE_PROPERTIES		5
 #define SETUP_JAILHOUSE			6

 #define SETUP_INDIRECT			(1<<31)

 /* SETUP_INDIRECT | max(SETUP_*) */
 #define SETUP_TYPE_MAX			(SETUP_INDIRECT | SETUP_JAILHOUSE)

 /* ram_size flags */
 #define RAMDISK_IMAGE_START_MASK	0x07FF
 #define RAMDISK_PROMPT_FLAG		0x8000
 #define RAMDISK_LOAD_FLAG		0x4000

 /* loadflags */
 #define LOADED_HIGH	(1<<0)
 #define KASLR_FLAG	(1<<1)
 #define QUIET_FLAG	(1<<5)
 #define KEEP_SEGMENTS	(1<<6)
 #define CAN_USE_HEAP	(1<<7)

 /* xloadflags */
 #define XLF_KERNEL_64			(1<<0)
 #define XLF_CAN_BE_LOADED_ABOVE_4G	(1<<1)
 #define XLF_EFI_HANDOVER_32		(1<<2)
 #define XLF_EFI_HANDOVER_64		(1<<3)
 #define XLF_EFI_KEXEC			(1<<4)
 #define XLF_5LEVEL			(1<<5)
 #define XLF_5LEVEL_ENABLED		(1<<6)

 #ifndef __ASSEMBLY__

 #include <linux/types.h>
 #include <linux/screen_info.h>
 #include <linux/apm_bios.h>
 #include <linux/edd.h>
 #include <asm/ist.h>
 #include <video/edid.h>

 /* extensible setup data list node */
 struct setup_data {
 	__u64 next;
 	__u32 type;
 	__u32 len;
 	__u8 data[0];
 };

 /* extensible setup indirect data node */
 struct setup_indirect {
 	__u32 type;
 	__u32 reserved;  /* Reserved, must be set to zero. */
 	__u64 len;
 	__u64 addr;
 };

 struct setup_header {
 	__u8	setup_sects;
 	__u16	root_flags;
 	__u32	syssize;
 	__u16	ram_size;
 	__u16	vid_mode;
 	__u16	root_dev;
 	__u16	boot_flag;
 	__u16	jump;
 	__u32	header;
 	__u16	version;
 	__u32	realmode_swtch;
 	__u16	start_sys_seg;
 	__u16	kernel_version;
 	__u8	type_of_loader;
 	__u8	loadflags;
 	__u16	setup_move_size;
 	__u32	code32_start;
 	__u32	ramdisk_image;
 	__u32	ramdisk_size;
 	__u32	bootsect_kludge;
 	__u16	heap_end_ptr;
 	__u8	ext_loader_ver;
 	__u8	ext_loader_type;
 	__u32	cmd_line_ptr;
 	__u32	initrd_addr_max;
 	__u32	kernel_alignment;
 	__u8	relocatable_kernel;
 	__u8	min_alignment;
 	__u16	xloadflags;
 	__u32	cmdline_size;
 	__u32	hardware_subarch;
 	__u64	hardware_subarch_data;
 	__u32	payload_offset;
 	__u32	payload_length;
 	__u64	setup_data;
 	__u64	pref_address;
 	__u32	init_size;
 	__u32	handover_offset;
 	__u32	kernel_info_offset;
 } __attribute__((packed));

 struct sys_desc_table {
 	__u16 length;
 	__u8  table[14];
 };

 /* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */
 struct olpc_ofw_header {
 	__u32 ofw_magic;	/* OFW signature */
 	__u32 ofw_version;
 	__u32 cif_handler;	/* callback into OFW */
 	__u32 irq_desc_table;
 } __attribute__((packed));

 struct efi_info {
 	__u32 efi_loader_signature;
 	__u32 efi_systab;
 	__u32 efi_memdesc_size;
 	__u32 efi_memdesc_version;
 	__u32 efi_memmap;
 	__u32 efi_memmap_size;
 	__u32 efi_systab_hi;
 	__u32 efi_memmap_hi;
 };

 /*
  * This is the maximum number of entries in struct boot_params::e820_table
  * (the zeropage), which is part of the x86 boot protocol ABI:
  */
 #define E820_MAX_ENTRIES_ZEROPAGE 128

 /*
  * The E820 memory region entry of the boot protocol ABI:
  */
 struct boot_e820_entry {
 	__u64 addr;
 	__u64 size;
 	__u32 type;
 } __attribute__((packed));

 /*
  * Smallest compatible version of jailhouse_setup_data required by this kernel.
  */
 #define JAILHOUSE_SETUP_REQUIRED_VERSION	1

 /*
  * The boot loader is passing platform information via this Jailhouse-specific
  * setup data structure.
  */
 struct jailhouse_setup_data {
 	struct {
 		__u16	version;
 		__u16	compatible_version;
 	} __attribute__((packed)) hdr;
 	struct {
 		__u16	pm_timer_address;
 		__u16	num_cpus;
 		__u64	pci_mmconfig_base;
 		__u32	tsc_khz;
 		__u32	apic_khz;
 		__u8	standard_ioapic;
 		__u8	cpu_ids[255];
 	} __attribute__((packed)) v1;
 	struct {
 		__u32	flags;
 	} __attribute__((packed)) v2;
 } __attribute__((packed));

 /* The so-called "zeropage" */
 struct boot_params {
 	struct screen_info screen_info;			/* 0x000 */
 	struct apm_bios_info apm_bios_info;		/* 0x040 */
 	__u8  _pad2[4];					/* 0x054 */
 	__u64  tboot_addr;				/* 0x058 */
 	struct ist_info ist_info;			/* 0x060 */
 	__u64 acpi_rsdp_addr;				/* 0x070 */
 	__u8  _pad3[8];					/* 0x078 */
 	__u8  hd0_info[16];	/* obsolete! */		/* 0x080 */
 	__u8  hd1_info[16];	/* obsolete! */		/* 0x090 */
 	struct sys_desc_table sys_desc_table; /* obsolete! */	/* 0x0a0 */
 	struct olpc_ofw_header olpc_ofw_header;		/* 0x0b0 */
 	__u32 ext_ramdisk_image;			/* 0x0c0 */
 	__u32 ext_ramdisk_size;				/* 0x0c4 */
 	__u32 ext_cmd_line_ptr;				/* 0x0c8 */
 	__u8  _pad4[116];				/* 0x0cc */
 	struct edid_info edid_info;			/* 0x140 */
 	struct efi_info efi_info;			/* 0x1c0 */
 	__u32 alt_mem_k;				/* 0x1e0 */
 	__u32 scratch;		/* Scratch field! */	/* 0x1e4 */
 	__u8  e820_entries;				/* 0x1e8 */
 	__u8  eddbuf_entries;				/* 0x1e9 */
 	__u8  edd_mbr_sig_buf_entries;			/* 0x1ea */
 	__u8  kbd_status;				/* 0x1eb */
 	__u8  secure_boot;				/* 0x1ec */
 	__u8  _pad5[2];					/* 0x1ed */
 	/*
 	 * The sentinel is set to a nonzero value (0xff) in header.S.
 	 *
 	 * A bootloader is supposed to only take setup_header and put
 	 * it into a clean boot_params buffer. If it turns out that
 	 * it is clumsy or too generous with the buffer, it most
 	 * probably will pick up the sentinel variable too. The fact
 	 * that this variable then is still 0xff will let kernel
 	 * know that some variables in boot_params are invalid and
 	 * kernel should zero out certain portions of boot_params.
 	 */
 	__u8  sentinel;					/* 0x1ef */
 	__u8  _pad6[1];					/* 0x1f0 */
 	struct setup_header hdr;    /* setup header */	/* 0x1f1 */
 	__u8  _pad7[0x290-0x1f1-sizeof(struct setup_header)];
 	__u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX];	/* 0x290 */
 	struct boot_e820_entry e820_table[E820_MAX_ENTRIES_ZEROPAGE]; /* 0x2d0 */
 	__u8  _pad8[48];				/* 0xcd0 */
 	struct edd_info eddbuf[EDDMAXNR];		/* 0xd00 */
 	__u8  _pad9[276];				/* 0xeec */
 } __attribute__((packed));

 /**
  * enum x86_hardware_subarch - x86 hardware subarchitecture
  *
  * The x86 hardware_subarch and hardware_subarch_data were added as of the x86
  * boot protocol 2.07 to help distinguish and support custom x86 boot
  * sequences. This enum represents accepted values for the x86
  * hardware_subarch.  Custom x86 boot sequences (not X86_SUBARCH_PC) do not
  * have or simply *cannot* make use of natural stubs like BIOS or EFI, the
  * hardware_subarch can be used on the Linux entry path to revector to a
  * subarchitecture stub when needed. This subarchitecture stub can be used to
  * set up Linux boot parameters or for special care to account for nonstandard
  * handling of page tables.
  *
  * These enums should only ever be used by x86 code, and the code that uses
  * it should be well contained and compartmentalized.
  *
  * KVM and Xen HVM do not have a subarch as these are expected to follow
  * standard x86 boot entries. If there is a genuine need for "hypervisor" type
  * that should be considered separately in the future. Future guest types
  * should seriously consider working with standard x86 boot stubs such as
  * the BIOS or EFI boot stubs.
  *
  * WARNING: this enum is only used for legacy hacks, for platform features that
  *	    are not easily enumerated or discoverable. You should not ever use
  *	    this for new features.
  *
  * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard
  *	PC mechanisms (PCI, ACPI) and doesn't need a special boot flow.
  * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated
  * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path,
  * 	which start at asm startup_xen() entry point and later jump to the C
  * 	xen_start_kernel() entry point. Both domU and dom0 type of guests are
  * 	currently supported through this PV boot path.
  * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform
  *	systems which do not have the PCI legacy interfaces.
  * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC
  * 	for settop boxes and media devices, the use of a subarch for CE4100
  * 	is more of a hack...
  */
 enum x86_hardware_subarch {
 	X86_SUBARCH_PC = 0,
 	X86_SUBARCH_LGUEST,
 	X86_SUBARCH_XEN,
 	X86_SUBARCH_INTEL_MID,
 	X86_SUBARCH_CE4100,
 	X86_NR_SUBARCHS,
 };

 #endif /* __ASSEMBLY__ */

 #endif /* _ASM_X86_BOOTPARAM_H */
	/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
	#ifndef _ASM_X86_BOOTPARAM_H
	#define _ASM_X86_BOOTPARAM_H

	/* setup_data/setup_indirect types */
	#define SETUP_NONE 0
	#define SETUP_E820_EXT 1
	#define SETUP_DTB 2
	#define SETUP_PCI 3
	#define SETUP_EFI 4
	#define SETUP_APPLE_PROPERTIES 5
	#define SETUP_JAILHOUSE 6

	#define SETUP_INDIRECT (1<<31)

	/* SETUP_INDIRECT \| max(SETUP_) /
	#define SETUP_TYPE_MAX (SETUP_INDIRECT \| SETUP_JAILHOUSE)

	/* ram_size flags */
	#define RAMDISK_IMAGE_START_MASK 0x07FF
	#define RAMDISK_PROMPT_FLAG 0x8000
	#define RAMDISK_LOAD_FLAG 0x4000

	/* loadflags */
	#define LOADED_HIGH (1<<0)
	#define KASLR_FLAG (1<<1)
	#define QUIET_FLAG (1<<5)
	#define KEEP_SEGMENTS (1<<6)
	#define CAN_USE_HEAP (1<<7)

	/* xloadflags */
	#define XLF_KERNEL_64 (1<<0)
	#define XLF_CAN_BE_LOADED_ABOVE_4G (1<<1)
	#define XLF_EFI_HANDOVER_32 (1<<2)
	#define XLF_EFI_HANDOVER_64 (1<<3)
	#define XLF_EFI_KEXEC (1<<4)
	#define XLF_5LEVEL (1<<5)
	#define XLF_5LEVEL_ENABLED (1<<6)

	#ifndef __ASSEMBLY__

	#include <linux/types.h>
	#include <linux/screen_info.h>
	#include <linux/apm_bios.h>
	#include <linux/edd.h>
	#include <asm/ist.h>
	#include <video/edid.h>

	/* extensible setup data list node */
	struct setup_data {
	__u64 next;
	__u32 type;
	__u32 len;
	__u8 data[0];
	};

	/* extensible setup indirect data node */
	struct setup_indirect {
	__u32 type;
	__u32 reserved; /* Reserved, must be set to zero. */
	__u64 len;
	__u64 addr;
	};

	struct setup_header {
	__u8 setup_sects;
	__u16 root_flags;
	__u32 syssize;
	__u16 ram_size;
	__u16 vid_mode;
	__u16 root_dev;
	__u16 boot_flag;
	__u16 jump;
	__u32 header;
	__u16 version;
	__u32 realmode_swtch;
	__u16 start_sys_seg;
	__u16 kernel_version;
	__u8 type_of_loader;
	__u8 loadflags;
	__u16 setup_move_size;
	__u32 code32_start;
	__u32 ramdisk_image;
	__u32 ramdisk_size;
	__u32 bootsect_kludge;
	__u16 heap_end_ptr;
	__u8 ext_loader_ver;
	__u8 ext_loader_type;
	__u32 cmd_line_ptr;
	__u32 initrd_addr_max;
	__u32 kernel_alignment;
	__u8 relocatable_kernel;
	__u8 min_alignment;
	__u16 xloadflags;
	__u32 cmdline_size;
	__u32 hardware_subarch;
	__u64 hardware_subarch_data;
	__u32 payload_offset;
	__u32 payload_length;
	__u64 setup_data;
	__u64 pref_address;
	__u32 init_size;
	__u32 handover_offset;
	__u32 kernel_info_offset;
	} __attribute__((packed));

	struct sys_desc_table {
	__u16 length;
	__u8 table[14];
	};

	/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */
	struct olpc_ofw_header {
	__u32 ofw_magic; /* OFW signature */
	__u32 ofw_version;
	__u32 cif_handler; /* callback into OFW */
	__u32 irq_desc_table;
	} __attribute__((packed));

	struct efi_info {
	__u32 efi_loader_signature;
	__u32 efi_systab;
	__u32 efi_memdesc_size;
	__u32 efi_memdesc_version;
	__u32 efi_memmap;
	__u32 efi_memmap_size;
	__u32 efi_systab_hi;
	__u32 efi_memmap_hi;
	};

	/*
	* This is the maximum number of entries in struct boot_params::e820_table
	* (the zeropage), which is part of the x86 boot protocol ABI:
	*/
	#define E820_MAX_ENTRIES_ZEROPAGE 128

	/*
	* The E820 memory region entry of the boot protocol ABI:
	*/
	struct boot_e820_entry {
	__u64 addr;
	__u64 size;
	__u32 type;
	} __attribute__((packed));

	/*
	* Smallest compatible version of jailhouse_setup_data required by this kernel.
	*/
	#define JAILHOUSE_SETUP_REQUIRED_VERSION 1

	/*
	* The boot loader is passing platform information via this Jailhouse-specific
	* setup data structure.
	*/
	struct jailhouse_setup_data {
	struct {
	__u16 version;
	__u16 compatible_version;
	} __attribute__((packed)) hdr;
	struct {
	__u16 pm_timer_address;
	__u16 num_cpus;
	__u64 pci_mmconfig_base;
	__u32 tsc_khz;
	__u32 apic_khz;
	__u8 standard_ioapic;
	__u8 cpu_ids[255];
	} __attribute__((packed)) v1;
	struct {
	__u32 flags;
	} __attribute__((packed)) v2;
	} __attribute__((packed));

	/* The so-called "zeropage" */
	struct boot_params {
	struct screen_info screen_info; /* 0x000 */
	struct apm_bios_info apm_bios_info; /* 0x040 */
	__u8 _pad2[4]; /* 0x054 */
	__u64 tboot_addr; /* 0x058 */
	struct ist_info ist_info; /* 0x060 */
	__u64 acpi_rsdp_addr; /* 0x070 */
	__u8 _pad3[8]; /* 0x078 */
	__u8 hd0_info[16]; /* obsolete! / / 0x080 */
	__u8 hd1_info[16]; /* obsolete! / / 0x090 */
	struct sys_desc_table sys_desc_table; /* obsolete! / / 0x0a0 */
	struct olpc_ofw_header olpc_ofw_header; /* 0x0b0 */
	__u32 ext_ramdisk_image; /* 0x0c0 */
	__u32 ext_ramdisk_size; /* 0x0c4 */
	__u32 ext_cmd_line_ptr; /* 0x0c8 */
	__u8 _pad4[116]; /* 0x0cc */
	struct edid_info edid_info; /* 0x140 */
	struct efi_info efi_info; /* 0x1c0 */
	__u32 alt_mem_k; /* 0x1e0 */
	__u32 scratch; /* Scratch field! / / 0x1e4 */
	__u8 e820_entries; /* 0x1e8 */
	__u8 eddbuf_entries; /* 0x1e9 */
	__u8 edd_mbr_sig_buf_entries; /* 0x1ea */
	__u8 kbd_status; /* 0x1eb */
	__u8 secure_boot; /* 0x1ec */
	__u8 _pad5[2]; /* 0x1ed */
	/*
	* The sentinel is set to a nonzero value (0xff) in header.S.
	*
	* A bootloader is supposed to only take setup_header and put
	* it into a clean boot_params buffer. If it turns out that
	* it is clumsy or too generous with the buffer, it most
	* probably will pick up the sentinel variable too. The fact
	* that this variable then is still 0xff will let kernel
	* know that some variables in boot_params are invalid and
	* kernel should zero out certain portions of boot_params.
	*/
	__u8 sentinel; /* 0x1ef */
	__u8 _pad6[1]; /* 0x1f0 */
	struct setup_header hdr; /* setup header / / 0x1f1 */
	__u8 _pad7[0x290-0x1f1-sizeof(struct setup_header)];
	__u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */
	struct boot_e820_entry e820_table[E820_MAX_ENTRIES_ZEROPAGE]; /* 0x2d0 */
	__u8 _pad8[48]; /* 0xcd0 */
	struct edd_info eddbuf[EDDMAXNR]; /* 0xd00 */
	__u8 _pad9[276]; /* 0xeec */
	} __attribute__((packed));

	/**
	* enum x86_hardware_subarch - x86 hardware subarchitecture
	*
	* The x86 hardware_subarch and hardware_subarch_data were added as of the x86
	* boot protocol 2.07 to help distinguish and support custom x86 boot
	* sequences. This enum represents accepted values for the x86
	* hardware_subarch. Custom x86 boot sequences (not X86_SUBARCH_PC) do not
	* have or simply cannot make use of natural stubs like BIOS or EFI, the
	* hardware_subarch can be used on the Linux entry path to revector to a
	* subarchitecture stub when needed. This subarchitecture stub can be used to
	* set up Linux boot parameters or for special care to account for nonstandard
	* handling of page tables.
	*
	* These enums should only ever be used by x86 code, and the code that uses
	* it should be well contained and compartmentalized.
	*
	* KVM and Xen HVM do not have a subarch as these are expected to follow
	* standard x86 boot entries. If there is a genuine need for "hypervisor" type
	* that should be considered separately in the future. Future guest types
	* should seriously consider working with standard x86 boot stubs such as
	* the BIOS or EFI boot stubs.
	*
	* WARNING: this enum is only used for legacy hacks, for platform features that
	* are not easily enumerated or discoverable. You should not ever use
	* this for new features.
	*
	* @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard
	* PC mechanisms (PCI, ACPI) and doesn't need a special boot flow.
	* @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated
	* @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path,
	* which start at asm startup_xen() entry point and later jump to the C
	* xen_start_kernel() entry point. Both domU and dom0 type of guests are
	* currently supported through this PV boot path.
	* @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform
	* systems which do not have the PCI legacy interfaces.
	* @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC
	* for settop boxes and media devices, the use of a subarch for CE4100
	* is more of a hack...
	*/
	enum x86_hardware_subarch {
	X86_SUBARCH_PC = 0,
	X86_SUBARCH_LGUEST,
	X86_SUBARCH_XEN,
	X86_SUBARCH_INTEL_MID,
	X86_SUBARCH_CE4100,
	X86_NR_SUBARCHS,
	};

	#endif /* __ASSEMBLY__ */

	#endif /* _ASM_X86_BOOTPARAM_H */