| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2020 SiFive, Inc. |
| * Copyright (C) 2020 Zong Li |
| */ |
| |
| #include <linux/clkdev.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/of_device.h> |
| #include "sifive-prci.h" |
| #include "fu540-prci.h" |
| #include "fu740-prci.h" |
| |
| static const struct prci_clk_desc prci_clk_fu540 = { |
| .clks = __prci_init_clocks_fu540, |
| .num_clks = ARRAY_SIZE(__prci_init_clocks_fu540), |
| }; |
| |
| /* |
| * Private functions |
| */ |
| |
| /** |
| * __prci_readl() - read from a PRCI register |
| * @pd: PRCI context |
| * @offs: register offset to read from (in bytes, from PRCI base address) |
| * |
| * Read the register located at offset @offs from the base virtual |
| * address of the PRCI register target described by @pd, and return |
| * the value to the caller. |
| * |
| * Context: Any context. |
| * |
| * Return: the contents of the register described by @pd and @offs. |
| */ |
| static u32 __prci_readl(struct __prci_data *pd, u32 offs) |
| { |
| return readl_relaxed(pd->va + offs); |
| } |
| |
| static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd) |
| { |
| writel_relaxed(v, pd->va + offs); |
| } |
| |
| /* WRPLL-related private functions */ |
| |
| /** |
| * __prci_wrpll_unpack() - unpack WRPLL configuration registers into parameters |
| * @c: ptr to a struct wrpll_cfg record to write config into |
| * @r: value read from the PRCI PLL configuration register |
| * |
| * Given a value @r read from an FU740 PRCI PLL configuration register, |
| * split it into fields and populate it into the WRPLL configuration record |
| * pointed to by @c. |
| * |
| * The COREPLLCFG0 macros are used below, but the other *PLLCFG0 macros |
| * have the same register layout. |
| * |
| * Context: Any context. |
| */ |
| static void __prci_wrpll_unpack(struct wrpll_cfg *c, u32 r) |
| { |
| u32 v; |
| |
| v = r & PRCI_COREPLLCFG0_DIVR_MASK; |
| v >>= PRCI_COREPLLCFG0_DIVR_SHIFT; |
| c->divr = v; |
| |
| v = r & PRCI_COREPLLCFG0_DIVF_MASK; |
| v >>= PRCI_COREPLLCFG0_DIVF_SHIFT; |
| c->divf = v; |
| |
| v = r & PRCI_COREPLLCFG0_DIVQ_MASK; |
| v >>= PRCI_COREPLLCFG0_DIVQ_SHIFT; |
| c->divq = v; |
| |
| v = r & PRCI_COREPLLCFG0_RANGE_MASK; |
| v >>= PRCI_COREPLLCFG0_RANGE_SHIFT; |
| c->range = v; |
| |
| c->flags &= |
| (WRPLL_FLAGS_INT_FEEDBACK_MASK | WRPLL_FLAGS_EXT_FEEDBACK_MASK); |
| |
| /* external feedback mode not supported */ |
| c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK; |
| } |
| |
| /** |
| * __prci_wrpll_pack() - pack PLL configuration parameters into a register value |
| * @c: pointer to a struct wrpll_cfg record containing the PLL's cfg |
| * |
| * Using a set of WRPLL configuration values pointed to by @c, |
| * assemble a PRCI PLL configuration register value, and return it to |
| * the caller. |
| * |
| * Context: Any context. Caller must ensure that the contents of the |
| * record pointed to by @c do not change during the execution |
| * of this function. |
| * |
| * Returns: a value suitable for writing into a PRCI PLL configuration |
| * register |
| */ |
| static u32 __prci_wrpll_pack(const struct wrpll_cfg *c) |
| { |
| u32 r = 0; |
| |
| r |= c->divr << PRCI_COREPLLCFG0_DIVR_SHIFT; |
| r |= c->divf << PRCI_COREPLLCFG0_DIVF_SHIFT; |
| r |= c->divq << PRCI_COREPLLCFG0_DIVQ_SHIFT; |
| r |= c->range << PRCI_COREPLLCFG0_RANGE_SHIFT; |
| |
| /* external feedback mode not supported */ |
| r |= PRCI_COREPLLCFG0_FSE_MASK; |
| |
| return r; |
| } |
| |
| /** |
| * __prci_wrpll_read_cfg0() - read the WRPLL configuration from the PRCI |
| * @pd: PRCI context |
| * @pwd: PRCI WRPLL metadata |
| * |
| * Read the current configuration of the PLL identified by @pwd from |
| * the PRCI identified by @pd, and store it into the local configuration |
| * cache in @pwd. |
| * |
| * Context: Any context. Caller must prevent the records pointed to by |
| * @pd and @pwd from changing during execution. |
| */ |
| static void __prci_wrpll_read_cfg0(struct __prci_data *pd, |
| struct __prci_wrpll_data *pwd) |
| { |
| __prci_wrpll_unpack(&pwd->c, __prci_readl(pd, pwd->cfg0_offs)); |
| } |
| |
| /** |
| * __prci_wrpll_write_cfg0() - write WRPLL configuration into the PRCI |
| * @pd: PRCI context |
| * @pwd: PRCI WRPLL metadata |
| * @c: WRPLL configuration record to write |
| * |
| * Write the WRPLL configuration described by @c into the WRPLL |
| * configuration register identified by @pwd in the PRCI instance |
| * described by @c. Make a cached copy of the WRPLL's current |
| * configuration so it can be used by other code. |
| * |
| * Context: Any context. Caller must prevent the records pointed to by |
| * @pd and @pwd from changing during execution. |
| */ |
| static void __prci_wrpll_write_cfg0(struct __prci_data *pd, |
| struct __prci_wrpll_data *pwd, |
| struct wrpll_cfg *c) |
| { |
| __prci_writel(__prci_wrpll_pack(c), pwd->cfg0_offs, pd); |
| |
| memcpy(&pwd->c, c, sizeof(*c)); |
| } |
| |
| /** |
| * __prci_wrpll_write_cfg1() - write Clock enable/disable configuration |
| * into the PRCI |
| * @pd: PRCI context |
| * @pwd: PRCI WRPLL metadata |
| * @enable: Clock enable or disable value |
| */ |
| static void __prci_wrpll_write_cfg1(struct __prci_data *pd, |
| struct __prci_wrpll_data *pwd, |
| u32 enable) |
| { |
| __prci_writel(enable, pwd->cfg1_offs, pd); |
| } |
| |
| /* |
| * Linux clock framework integration |
| * |
| * See the Linux clock framework documentation for more information on |
| * these functions. |
| */ |
| |
| unsigned long sifive_prci_wrpll_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct __prci_clock *pc = clk_hw_to_prci_clock(hw); |
| struct __prci_wrpll_data *pwd = pc->pwd; |
| |
| return wrpll_calc_output_rate(&pwd->c, parent_rate); |
| } |
| |
| long sifive_prci_wrpll_round_rate(struct clk_hw *hw, |
| unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| struct __prci_clock *pc = clk_hw_to_prci_clock(hw); |
| struct __prci_wrpll_data *pwd = pc->pwd; |
| struct wrpll_cfg c; |
| |
| memcpy(&c, &pwd->c, sizeof(c)); |
| |
| wrpll_configure_for_rate(&c, rate, *parent_rate); |
| |
| return wrpll_calc_output_rate(&c, *parent_rate); |
| } |
| |
| int sifive_prci_wrpll_set_rate(struct clk_hw *hw, |
| unsigned long rate, unsigned long parent_rate) |
| { |
| struct __prci_clock *pc = clk_hw_to_prci_clock(hw); |
| struct __prci_wrpll_data *pwd = pc->pwd; |
| struct __prci_data *pd = pc->pd; |
| int r; |
| |
| r = wrpll_configure_for_rate(&pwd->c, rate, parent_rate); |
| if (r) |
| return r; |
| |
| if (pwd->enable_bypass) |
| pwd->enable_bypass(pd); |
| |
| __prci_wrpll_write_cfg0(pd, pwd, &pwd->c); |
| |
| udelay(wrpll_calc_max_lock_us(&pwd->c)); |
| |
| return 0; |
| } |
| |
| int sifive_clk_is_enabled(struct clk_hw *hw) |
| { |
| struct __prci_clock *pc = clk_hw_to_prci_clock(hw); |
| struct __prci_wrpll_data *pwd = pc->pwd; |
| struct __prci_data *pd = pc->pd; |
| u32 r; |
| |
| r = __prci_readl(pd, pwd->cfg1_offs); |
| |
| if (r & PRCI_COREPLLCFG1_CKE_MASK) |
| return 1; |
| else |
| return 0; |
| } |
| |
| int sifive_prci_clock_enable(struct clk_hw *hw) |
| { |
| struct __prci_clock *pc = clk_hw_to_prci_clock(hw); |
| struct __prci_wrpll_data *pwd = pc->pwd; |
| struct __prci_data *pd = pc->pd; |
| |
| if (sifive_clk_is_enabled(hw)) |
| return 0; |
| |
| __prci_wrpll_write_cfg1(pd, pwd, PRCI_COREPLLCFG1_CKE_MASK); |
| |
| if (pwd->disable_bypass) |
| pwd->disable_bypass(pd); |
| |
| return 0; |
| } |
| |
| void sifive_prci_clock_disable(struct clk_hw *hw) |
| { |
| struct __prci_clock *pc = clk_hw_to_prci_clock(hw); |
| struct __prci_wrpll_data *pwd = pc->pwd; |
| struct __prci_data *pd = pc->pd; |
| u32 r; |
| |
| if (pwd->enable_bypass) |
| pwd->enable_bypass(pd); |
| |
| r = __prci_readl(pd, pwd->cfg1_offs); |
| r &= ~PRCI_COREPLLCFG1_CKE_MASK; |
| |
| __prci_wrpll_write_cfg1(pd, pwd, r); |
| } |
| |
| /* TLCLKSEL clock integration */ |
| |
| unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct __prci_clock *pc = clk_hw_to_prci_clock(hw); |
| struct __prci_data *pd = pc->pd; |
| u32 v; |
| u8 div; |
| |
| v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET); |
| v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK; |
| div = v ? 1 : 2; |
| |
| return div_u64(parent_rate, div); |
| } |
| |
| /* HFPCLK clock integration */ |
| |
| unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct __prci_clock *pc = clk_hw_to_prci_clock(hw); |
| struct __prci_data *pd = pc->pd; |
| u32 div = __prci_readl(pd, PRCI_HFPCLKPLLDIV_OFFSET); |
| |
| return div_u64(parent_rate, div + 2); |
| } |
| |
| /* |
| * Core clock mux control |
| */ |
| |
| /** |
| * sifive_prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK |
| * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg |
| * |
| * Switch the CORECLK mux to the HFCLK input source; return once complete. |
| * |
| * Context: Any context. Caller must prevent concurrent changes to the |
| * PRCI_CORECLKSEL_OFFSET register. |
| */ |
| void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd) |
| { |
| u32 r; |
| |
| r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); |
| r |= PRCI_CORECLKSEL_CORECLKSEL_MASK; |
| __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); |
| |
| r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ |
| } |
| |
| /** |
| * sifive_prci_coreclksel_use_corepll() - switch the CORECLK mux to output |
| * COREPLL |
| * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg |
| * |
| * Switch the CORECLK mux to the COREPLL output clock; return once complete. |
| * |
| * Context: Any context. Caller must prevent concurrent changes to the |
| * PRCI_CORECLKSEL_OFFSET register. |
| */ |
| void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd) |
| { |
| u32 r; |
| |
| r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); |
| r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK; |
| __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); |
| |
| r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ |
| } |
| |
| /** |
| * sifive_prci_coreclksel_use_final_corepll() - switch the CORECLK mux to output |
| * FINAL_COREPLL |
| * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg |
| * |
| * Switch the CORECLK mux to the final COREPLL output clock; return once |
| * complete. |
| * |
| * Context: Any context. Caller must prevent concurrent changes to the |
| * PRCI_CORECLKSEL_OFFSET register. |
| */ |
| void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd) |
| { |
| u32 r; |
| |
| r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); |
| r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK; |
| __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); |
| |
| r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ |
| } |
| |
| /** |
| * sifive_prci_corepllsel_use_dvfscorepll() - switch the COREPLL mux to |
| * output DVFS_COREPLL |
| * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg |
| * |
| * Switch the COREPLL mux to the DVFSCOREPLL output clock; return once complete. |
| * |
| * Context: Any context. Caller must prevent concurrent changes to the |
| * PRCI_COREPLLSEL_OFFSET register. |
| */ |
| void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd) |
| { |
| u32 r; |
| |
| r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); |
| r |= PRCI_COREPLLSEL_COREPLLSEL_MASK; |
| __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd); |
| |
| r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */ |
| } |
| |
| /** |
| * sifive_prci_corepllsel_use_corepll() - switch the COREPLL mux to |
| * output COREPLL |
| * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg |
| * |
| * Switch the COREPLL mux to the COREPLL output clock; return once complete. |
| * |
| * Context: Any context. Caller must prevent concurrent changes to the |
| * PRCI_COREPLLSEL_OFFSET register. |
| */ |
| void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd) |
| { |
| u32 r; |
| |
| r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); |
| r &= ~PRCI_COREPLLSEL_COREPLLSEL_MASK; |
| __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd); |
| |
| r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */ |
| } |
| |
| /** |
| * sifive_prci_hfpclkpllsel_use_hfclk() - switch the HFPCLKPLL mux to |
| * output HFCLK |
| * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg |
| * |
| * Switch the HFPCLKPLL mux to the HFCLK input source; return once complete. |
| * |
| * Context: Any context. Caller must prevent concurrent changes to the |
| * PRCI_HFPCLKPLLSEL_OFFSET register. |
| */ |
| void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd) |
| { |
| u32 r; |
| |
| r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); |
| r |= PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK; |
| __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd); |
| |
| r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */ |
| } |
| |
| /** |
| * sifive_prci_hfpclkpllsel_use_hfpclkpll() - switch the HFPCLKPLL mux to |
| * output HFPCLKPLL |
| * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg |
| * |
| * Switch the HFPCLKPLL mux to the HFPCLKPLL output clock; return once complete. |
| * |
| * Context: Any context. Caller must prevent concurrent changes to the |
| * PRCI_HFPCLKPLLSEL_OFFSET register. |
| */ |
| void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd) |
| { |
| u32 r; |
| |
| r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); |
| r &= ~PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK; |
| __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd); |
| |
| r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */ |
| } |
| |
| /* PCIE AUX clock APIs for enable, disable. */ |
| int sifive_prci_pcie_aux_clock_is_enabled(struct clk_hw *hw) |
| { |
| struct __prci_clock *pc = clk_hw_to_prci_clock(hw); |
| struct __prci_data *pd = pc->pd; |
| u32 r; |
| |
| r = __prci_readl(pd, PRCI_PCIE_AUX_OFFSET); |
| |
| if (r & PRCI_PCIE_AUX_EN_MASK) |
| return 1; |
| else |
| return 0; |
| } |
| |
| int sifive_prci_pcie_aux_clock_enable(struct clk_hw *hw) |
| { |
| struct __prci_clock *pc = clk_hw_to_prci_clock(hw); |
| struct __prci_data *pd = pc->pd; |
| u32 r __maybe_unused; |
| |
| if (sifive_prci_pcie_aux_clock_is_enabled(hw)) |
| return 0; |
| |
| __prci_writel(1, PRCI_PCIE_AUX_OFFSET, pd); |
| r = __prci_readl(pd, PRCI_PCIE_AUX_OFFSET); /* barrier */ |
| |
| return 0; |
| } |
| |
| void sifive_prci_pcie_aux_clock_disable(struct clk_hw *hw) |
| { |
| struct __prci_clock *pc = clk_hw_to_prci_clock(hw); |
| struct __prci_data *pd = pc->pd; |
| u32 r __maybe_unused; |
| |
| __prci_writel(0, PRCI_PCIE_AUX_OFFSET, pd); |
| r = __prci_readl(pd, PRCI_PCIE_AUX_OFFSET); /* barrier */ |
| |
| } |
| |
| /** |
| * __prci_register_clocks() - register clock controls in the PRCI |
| * @dev: Linux struct device |
| * @pd: The pointer for PRCI per-device instance data |
| * @desc: The pointer for the information of clocks of each SoCs |
| * |
| * Register the list of clock controls described in __prci_init_clocks[] with |
| * the Linux clock framework. |
| * |
| * Return: 0 upon success or a negative error code upon failure. |
| */ |
| static int __prci_register_clocks(struct device *dev, struct __prci_data *pd, |
| const struct prci_clk_desc *desc) |
| { |
| struct clk_init_data init = { }; |
| struct __prci_clock *pic; |
| int parent_count, i, r; |
| |
| parent_count = of_clk_get_parent_count(dev->of_node); |
| if (parent_count != EXPECTED_CLK_PARENT_COUNT) { |
| dev_err(dev, "expected only two parent clocks, found %d\n", |
| parent_count); |
| return -EINVAL; |
| } |
| |
| /* Register PLLs */ |
| for (i = 0; i < desc->num_clks; ++i) { |
| pic = &(desc->clks[i]); |
| |
| init.name = pic->name; |
| init.parent_names = &pic->parent_name; |
| init.num_parents = 1; |
| init.ops = pic->ops; |
| pic->hw.init = &init; |
| |
| pic->pd = pd; |
| |
| if (pic->pwd) |
| __prci_wrpll_read_cfg0(pd, pic->pwd); |
| |
| r = devm_clk_hw_register(dev, &pic->hw); |
| if (r) { |
| dev_warn(dev, "Failed to register clock %s: %d\n", |
| init.name, r); |
| return r; |
| } |
| |
| r = clk_hw_register_clkdev(&pic->hw, pic->name, dev_name(dev)); |
| if (r) { |
| dev_warn(dev, "Failed to register clkdev for %s: %d\n", |
| init.name, r); |
| return r; |
| } |
| |
| pd->hw_clks.hws[i] = &pic->hw; |
| } |
| |
| pd->hw_clks.num = i; |
| |
| r = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, |
| &pd->hw_clks); |
| if (r) { |
| dev_err(dev, "could not add hw_provider: %d\n", r); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * sifive_prci_probe() - initialize prci data and check parent count |
| * @pdev: platform device pointer for the prci |
| * |
| * Return: 0 upon success or a negative error code upon failure. |
| */ |
| static int sifive_prci_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| struct __prci_data *pd; |
| const struct prci_clk_desc *desc; |
| int r; |
| |
| desc = of_device_get_match_data(&pdev->dev); |
| |
| pd = devm_kzalloc(dev, struct_size(pd, hw_clks.hws, desc->num_clks), GFP_KERNEL); |
| if (!pd) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| pd->va = devm_ioremap_resource(dev, res); |
| if (IS_ERR(pd->va)) |
| return PTR_ERR(pd->va); |
| |
| pd->reset.rcdev.owner = THIS_MODULE; |
| pd->reset.rcdev.nr_resets = PRCI_RST_NR; |
| pd->reset.rcdev.ops = &reset_simple_ops; |
| pd->reset.rcdev.of_node = pdev->dev.of_node; |
| pd->reset.active_low = true; |
| pd->reset.membase = pd->va + PRCI_DEVICESRESETREG_OFFSET; |
| spin_lock_init(&pd->reset.lock); |
| |
| r = devm_reset_controller_register(&pdev->dev, &pd->reset.rcdev); |
| if (r) { |
| dev_err(dev, "could not register reset controller: %d\n", r); |
| return r; |
| } |
| r = __prci_register_clocks(dev, pd, desc); |
| if (r) { |
| dev_err(dev, "could not register clocks: %d\n", r); |
| return r; |
| } |
| |
| dev_dbg(dev, "SiFive PRCI probed\n"); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id sifive_prci_of_match[] = { |
| {.compatible = "sifive,fu540-c000-prci", .data = &prci_clk_fu540}, |
| {.compatible = "sifive,fu740-c000-prci", .data = &prci_clk_fu740}, |
| {} |
| }; |
| |
| static struct platform_driver sifive_prci_driver = { |
| .driver = { |
| .name = "sifive-clk-prci", |
| .of_match_table = sifive_prci_of_match, |
| }, |
| .probe = sifive_prci_probe, |
| }; |
| |
| static int __init sifive_prci_init(void) |
| { |
| return platform_driver_register(&sifive_prci_driver); |
| } |
| core_initcall(sifive_prci_init); |