| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. |
| */ |
| |
| #include <linux/clkdev.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/clk/tegra.h> |
| #include <linux/reset-controller.h> |
| |
| #include <soc/tegra/fuse.h> |
| |
| #include "clk.h" |
| |
| /* Global data of Tegra CPU CAR ops */ |
| static struct tegra_cpu_car_ops dummy_car_ops; |
| struct tegra_cpu_car_ops *tegra_cpu_car_ops = &dummy_car_ops; |
| |
| int *periph_clk_enb_refcnt; |
| static int periph_banks; |
| static u32 *periph_state_ctx; |
| static struct clk **clks; |
| static int clk_num; |
| static struct clk_onecell_data clk_data; |
| |
| /* Handlers for SoC-specific reset lines */ |
| static int (*special_reset_assert)(unsigned long); |
| static int (*special_reset_deassert)(unsigned long); |
| static unsigned int num_special_reset; |
| |
| static const struct tegra_clk_periph_regs periph_regs[] = { |
| [0] = { |
| .enb_reg = CLK_OUT_ENB_L, |
| .enb_set_reg = CLK_OUT_ENB_SET_L, |
| .enb_clr_reg = CLK_OUT_ENB_CLR_L, |
| .rst_reg = RST_DEVICES_L, |
| .rst_set_reg = RST_DEVICES_SET_L, |
| .rst_clr_reg = RST_DEVICES_CLR_L, |
| }, |
| [1] = { |
| .enb_reg = CLK_OUT_ENB_H, |
| .enb_set_reg = CLK_OUT_ENB_SET_H, |
| .enb_clr_reg = CLK_OUT_ENB_CLR_H, |
| .rst_reg = RST_DEVICES_H, |
| .rst_set_reg = RST_DEVICES_SET_H, |
| .rst_clr_reg = RST_DEVICES_CLR_H, |
| }, |
| [2] = { |
| .enb_reg = CLK_OUT_ENB_U, |
| .enb_set_reg = CLK_OUT_ENB_SET_U, |
| .enb_clr_reg = CLK_OUT_ENB_CLR_U, |
| .rst_reg = RST_DEVICES_U, |
| .rst_set_reg = RST_DEVICES_SET_U, |
| .rst_clr_reg = RST_DEVICES_CLR_U, |
| }, |
| [3] = { |
| .enb_reg = CLK_OUT_ENB_V, |
| .enb_set_reg = CLK_OUT_ENB_SET_V, |
| .enb_clr_reg = CLK_OUT_ENB_CLR_V, |
| .rst_reg = RST_DEVICES_V, |
| .rst_set_reg = RST_DEVICES_SET_V, |
| .rst_clr_reg = RST_DEVICES_CLR_V, |
| }, |
| [4] = { |
| .enb_reg = CLK_OUT_ENB_W, |
| .enb_set_reg = CLK_OUT_ENB_SET_W, |
| .enb_clr_reg = CLK_OUT_ENB_CLR_W, |
| .rst_reg = RST_DEVICES_W, |
| .rst_set_reg = RST_DEVICES_SET_W, |
| .rst_clr_reg = RST_DEVICES_CLR_W, |
| }, |
| [5] = { |
| .enb_reg = CLK_OUT_ENB_X, |
| .enb_set_reg = CLK_OUT_ENB_SET_X, |
| .enb_clr_reg = CLK_OUT_ENB_CLR_X, |
| .rst_reg = RST_DEVICES_X, |
| .rst_set_reg = RST_DEVICES_SET_X, |
| .rst_clr_reg = RST_DEVICES_CLR_X, |
| }, |
| [6] = { |
| .enb_reg = CLK_OUT_ENB_Y, |
| .enb_set_reg = CLK_OUT_ENB_SET_Y, |
| .enb_clr_reg = CLK_OUT_ENB_CLR_Y, |
| .rst_reg = RST_DEVICES_Y, |
| .rst_set_reg = RST_DEVICES_SET_Y, |
| .rst_clr_reg = RST_DEVICES_CLR_Y, |
| }, |
| }; |
| |
| static void __iomem *clk_base; |
| |
| static int tegra_clk_rst_assert(struct reset_controller_dev *rcdev, |
| unsigned long id) |
| { |
| /* |
| * If peripheral is on the APB bus then we must read the APB bus to |
| * flush the write operation in apb bus. This will avoid peripheral |
| * access after disabling clock. Since the reset driver has no |
| * knowledge of which reset IDs represent which devices, simply do |
| * this all the time. |
| */ |
| tegra_read_chipid(); |
| |
| if (id < periph_banks * 32) { |
| writel_relaxed(BIT(id % 32), |
| clk_base + periph_regs[id / 32].rst_set_reg); |
| return 0; |
| } else if (id < periph_banks * 32 + num_special_reset) { |
| return special_reset_assert(id); |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int tegra_clk_rst_deassert(struct reset_controller_dev *rcdev, |
| unsigned long id) |
| { |
| if (id < periph_banks * 32) { |
| writel_relaxed(BIT(id % 32), |
| clk_base + periph_regs[id / 32].rst_clr_reg); |
| return 0; |
| } else if (id < periph_banks * 32 + num_special_reset) { |
| return special_reset_deassert(id); |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int tegra_clk_rst_reset(struct reset_controller_dev *rcdev, |
| unsigned long id) |
| { |
| int err; |
| |
| err = tegra_clk_rst_assert(rcdev, id); |
| if (err) |
| return err; |
| |
| udelay(1); |
| |
| return tegra_clk_rst_deassert(rcdev, id); |
| } |
| |
| const struct tegra_clk_periph_regs *get_reg_bank(int clkid) |
| { |
| int reg_bank = clkid / 32; |
| |
| if (reg_bank < periph_banks) |
| return &periph_regs[reg_bank]; |
| else { |
| WARN_ON(1); |
| return NULL; |
| } |
| } |
| |
| void tegra_clk_set_pllp_out_cpu(bool enable) |
| { |
| u32 val; |
| |
| val = readl_relaxed(clk_base + CLK_OUT_ENB_Y); |
| if (enable) |
| val |= CLK_ENB_PLLP_OUT_CPU; |
| else |
| val &= ~CLK_ENB_PLLP_OUT_CPU; |
| |
| writel_relaxed(val, clk_base + CLK_OUT_ENB_Y); |
| } |
| |
| void tegra_clk_periph_suspend(void) |
| { |
| unsigned int i, idx; |
| |
| idx = 0; |
| for (i = 0; i < periph_banks; i++, idx++) |
| periph_state_ctx[idx] = |
| readl_relaxed(clk_base + periph_regs[i].enb_reg); |
| |
| for (i = 0; i < periph_banks; i++, idx++) |
| periph_state_ctx[idx] = |
| readl_relaxed(clk_base + periph_regs[i].rst_reg); |
| } |
| |
| void tegra_clk_periph_resume(void) |
| { |
| unsigned int i, idx; |
| |
| idx = 0; |
| for (i = 0; i < periph_banks; i++, idx++) |
| writel_relaxed(periph_state_ctx[idx], |
| clk_base + periph_regs[i].enb_reg); |
| /* |
| * All non-boot peripherals will be in reset state on resume. |
| * Wait for 5us of reset propagation delay before de-asserting |
| * the peripherals based on the saved context. |
| */ |
| fence_udelay(5, clk_base); |
| |
| for (i = 0; i < periph_banks; i++, idx++) |
| writel_relaxed(periph_state_ctx[idx], |
| clk_base + periph_regs[i].rst_reg); |
| |
| fence_udelay(2, clk_base); |
| } |
| |
| static int tegra_clk_periph_ctx_init(int banks) |
| { |
| periph_state_ctx = kcalloc(2 * banks, sizeof(*periph_state_ctx), |
| GFP_KERNEL); |
| if (!periph_state_ctx) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| struct clk ** __init tegra_clk_init(void __iomem *regs, int num, int banks) |
| { |
| clk_base = regs; |
| |
| if (WARN_ON(banks > ARRAY_SIZE(periph_regs))) |
| return NULL; |
| |
| periph_clk_enb_refcnt = kcalloc(32 * banks, |
| sizeof(*periph_clk_enb_refcnt), |
| GFP_KERNEL); |
| if (!periph_clk_enb_refcnt) |
| return NULL; |
| |
| periph_banks = banks; |
| |
| clks = kcalloc(num, sizeof(struct clk *), GFP_KERNEL); |
| if (!clks) { |
| kfree(periph_clk_enb_refcnt); |
| return NULL; |
| } |
| |
| clk_num = num; |
| |
| if (IS_ENABLED(CONFIG_PM_SLEEP)) { |
| if (tegra_clk_periph_ctx_init(banks)) { |
| kfree(periph_clk_enb_refcnt); |
| kfree(clks); |
| return NULL; |
| } |
| } |
| |
| return clks; |
| } |
| |
| void __init tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list, |
| struct clk *clks[], int clk_max) |
| { |
| struct clk *clk; |
| |
| for (; dup_list->clk_id < clk_max; dup_list++) { |
| clk = clks[dup_list->clk_id]; |
| dup_list->lookup.clk = clk; |
| clkdev_add(&dup_list->lookup); |
| } |
| } |
| |
| void __init tegra_init_from_table(struct tegra_clk_init_table *tbl, |
| struct clk *clks[], int clk_max) |
| { |
| struct clk *clk; |
| |
| for (; tbl->clk_id < clk_max; tbl++) { |
| clk = clks[tbl->clk_id]; |
| if (IS_ERR_OR_NULL(clk)) { |
| pr_err("%s: invalid entry %ld in clks array for id %d\n", |
| __func__, PTR_ERR(clk), tbl->clk_id); |
| WARN_ON(1); |
| |
| continue; |
| } |
| |
| if (tbl->parent_id < clk_max) { |
| struct clk *parent = clks[tbl->parent_id]; |
| if (clk_set_parent(clk, parent)) { |
| pr_err("%s: Failed to set parent %s of %s\n", |
| __func__, __clk_get_name(parent), |
| __clk_get_name(clk)); |
| WARN_ON(1); |
| } |
| } |
| |
| if (tbl->rate) |
| if (clk_set_rate(clk, tbl->rate)) { |
| pr_err("%s: Failed to set rate %lu of %s\n", |
| __func__, tbl->rate, |
| __clk_get_name(clk)); |
| WARN_ON(1); |
| } |
| |
| if (tbl->state) |
| if (clk_prepare_enable(clk)) { |
| pr_err("%s: Failed to enable %s\n", __func__, |
| __clk_get_name(clk)); |
| WARN_ON(1); |
| } |
| } |
| } |
| |
| static const struct reset_control_ops rst_ops = { |
| .assert = tegra_clk_rst_assert, |
| .deassert = tegra_clk_rst_deassert, |
| .reset = tegra_clk_rst_reset, |
| }; |
| |
| static struct reset_controller_dev rst_ctlr = { |
| .ops = &rst_ops, |
| .owner = THIS_MODULE, |
| .of_reset_n_cells = 1, |
| }; |
| |
| void __init tegra_add_of_provider(struct device_node *np, |
| void *clk_src_onecell_get) |
| { |
| int i; |
| |
| for (i = 0; i < clk_num; i++) { |
| if (IS_ERR(clks[i])) { |
| pr_err |
| ("Tegra clk %d: register failed with %ld\n", |
| i, PTR_ERR(clks[i])); |
| } |
| if (!clks[i]) |
| clks[i] = ERR_PTR(-EINVAL); |
| } |
| |
| clk_data.clks = clks; |
| clk_data.clk_num = clk_num; |
| of_clk_add_provider(np, clk_src_onecell_get, &clk_data); |
| |
| rst_ctlr.of_node = np; |
| rst_ctlr.nr_resets = periph_banks * 32 + num_special_reset; |
| reset_controller_register(&rst_ctlr); |
| } |
| |
| void __init tegra_init_special_resets(unsigned int num, |
| int (*assert)(unsigned long), |
| int (*deassert)(unsigned long)) |
| { |
| num_special_reset = num; |
| special_reset_assert = assert; |
| special_reset_deassert = deassert; |
| } |
| |
| void __init tegra_register_devclks(struct tegra_devclk *dev_clks, int num) |
| { |
| int i; |
| |
| for (i = 0; i < num; i++, dev_clks++) |
| clk_register_clkdev(clks[dev_clks->dt_id], dev_clks->con_id, |
| dev_clks->dev_id); |
| |
| for (i = 0; i < clk_num; i++) { |
| if (!IS_ERR_OR_NULL(clks[i])) |
| clk_register_clkdev(clks[i], __clk_get_name(clks[i]), |
| "tegra-clk-debug"); |
| } |
| } |
| |
| struct clk ** __init tegra_lookup_dt_id(int clk_id, |
| struct tegra_clk *tegra_clk) |
| { |
| if (tegra_clk[clk_id].present) |
| return &clks[tegra_clk[clk_id].dt_id]; |
| else |
| return NULL; |
| } |
| |
| tegra_clk_apply_init_table_func tegra_clk_apply_init_table; |
| |
| static int __init tegra_clocks_apply_init_table(void) |
| { |
| if (!tegra_clk_apply_init_table) |
| return 0; |
| |
| tegra_clk_apply_init_table(); |
| |
| return 0; |
| } |
| arch_initcall(tegra_clocks_apply_init_table); |