| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * |
| * Copyright (C) 2012 ARM Limited |
| */ |
| |
| #include <linux/clkdev.h> |
| #include <linux/clk-provider.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/vexpress.h> |
| |
| struct vexpress_osc { |
| struct regmap *reg; |
| struct clk_hw hw; |
| unsigned long rate_min; |
| unsigned long rate_max; |
| }; |
| |
| #define to_vexpress_osc(osc) container_of(osc, struct vexpress_osc, hw) |
| |
| static unsigned long vexpress_osc_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct vexpress_osc *osc = to_vexpress_osc(hw); |
| u32 rate; |
| |
| regmap_read(osc->reg, 0, &rate); |
| |
| return rate; |
| } |
| |
| static long vexpress_osc_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| struct vexpress_osc *osc = to_vexpress_osc(hw); |
| |
| if (osc->rate_min && rate < osc->rate_min) |
| rate = osc->rate_min; |
| |
| if (osc->rate_max && rate > osc->rate_max) |
| rate = osc->rate_max; |
| |
| return rate; |
| } |
| |
| static int vexpress_osc_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct vexpress_osc *osc = to_vexpress_osc(hw); |
| |
| return regmap_write(osc->reg, 0, rate); |
| } |
| |
| static const struct clk_ops vexpress_osc_ops = { |
| .recalc_rate = vexpress_osc_recalc_rate, |
| .round_rate = vexpress_osc_round_rate, |
| .set_rate = vexpress_osc_set_rate, |
| }; |
| |
| |
| static int vexpress_osc_probe(struct platform_device *pdev) |
| { |
| struct clk_init_data init; |
| struct vexpress_osc *osc; |
| u32 range[2]; |
| int ret; |
| |
| osc = devm_kzalloc(&pdev->dev, sizeof(*osc), GFP_KERNEL); |
| if (!osc) |
| return -ENOMEM; |
| |
| osc->reg = devm_regmap_init_vexpress_config(&pdev->dev); |
| if (IS_ERR(osc->reg)) |
| return PTR_ERR(osc->reg); |
| |
| if (of_property_read_u32_array(pdev->dev.of_node, "freq-range", range, |
| ARRAY_SIZE(range)) == 0) { |
| osc->rate_min = range[0]; |
| osc->rate_max = range[1]; |
| } |
| |
| if (of_property_read_string(pdev->dev.of_node, "clock-output-names", |
| &init.name) != 0) |
| init.name = dev_name(&pdev->dev); |
| |
| init.ops = &vexpress_osc_ops; |
| init.flags = 0; |
| init.num_parents = 0; |
| |
| osc->hw.init = &init; |
| |
| ret = devm_clk_hw_register(&pdev->dev, &osc->hw); |
| if (ret < 0) |
| return ret; |
| |
| devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_simple_get, &osc->hw); |
| clk_hw_set_rate_range(&osc->hw, osc->rate_min, osc->rate_max); |
| |
| dev_dbg(&pdev->dev, "Registered clock '%s'\n", init.name); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id vexpress_osc_of_match[] = { |
| { .compatible = "arm,vexpress-osc", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, vexpress_osc_of_match); |
| |
| static struct platform_driver vexpress_osc_driver = { |
| .driver = { |
| .name = "vexpress-osc", |
| .of_match_table = vexpress_osc_of_match, |
| }, |
| .probe = vexpress_osc_probe, |
| }; |
| module_platform_driver(vexpress_osc_driver); |
| MODULE_LICENSE("GPL v2"); |