| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright (c) 2016 The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/pm_opp.h> |
| #include "a5xx_gpu.h" |
| |
| /* |
| * The GPMU data block is a block of shared registers that can be used to |
| * communicate back and forth. These "registers" are by convention with the GPMU |
| * firwmare and not bound to any specific hardware design |
| */ |
| |
| #define AGC_INIT_BASE REG_A5XX_GPMU_DATA_RAM_BASE |
| #define AGC_INIT_MSG_MAGIC (AGC_INIT_BASE + 5) |
| #define AGC_MSG_BASE (AGC_INIT_BASE + 7) |
| |
| #define AGC_MSG_STATE (AGC_MSG_BASE + 0) |
| #define AGC_MSG_COMMAND (AGC_MSG_BASE + 1) |
| #define AGC_MSG_PAYLOAD_SIZE (AGC_MSG_BASE + 3) |
| #define AGC_MSG_PAYLOAD(_o) ((AGC_MSG_BASE + 5) + (_o)) |
| |
| #define AGC_POWER_CONFIG_PRODUCTION_ID 1 |
| #define AGC_INIT_MSG_VALUE 0xBABEFACE |
| |
| /* AGC_LM_CONFIG (A540+) */ |
| #define AGC_LM_CONFIG (136/4) |
| #define AGC_LM_CONFIG_GPU_VERSION_SHIFT 17 |
| #define AGC_LM_CONFIG_ENABLE_GPMU_ADAPTIVE 1 |
| #define AGC_LM_CONFIG_THROTTLE_DISABLE (2 << 8) |
| #define AGC_LM_CONFIG_ISENSE_ENABLE (1 << 4) |
| #define AGC_LM_CONFIG_ENABLE_ERROR (3 << 4) |
| #define AGC_LM_CONFIG_LLM_ENABLED (1 << 16) |
| #define AGC_LM_CONFIG_BCL_DISABLED (1 << 24) |
| |
| #define AGC_LEVEL_CONFIG (140/4) |
| |
| static struct { |
| uint32_t reg; |
| uint32_t value; |
| } a5xx_sequence_regs[] = { |
| { 0xB9A1, 0x00010303 }, |
| { 0xB9A2, 0x13000000 }, |
| { 0xB9A3, 0x00460020 }, |
| { 0xB9A4, 0x10000000 }, |
| { 0xB9A5, 0x040A1707 }, |
| { 0xB9A6, 0x00010000 }, |
| { 0xB9A7, 0x0E000904 }, |
| { 0xB9A8, 0x10000000 }, |
| { 0xB9A9, 0x01165000 }, |
| { 0xB9AA, 0x000E0002 }, |
| { 0xB9AB, 0x03884141 }, |
| { 0xB9AC, 0x10000840 }, |
| { 0xB9AD, 0x572A5000 }, |
| { 0xB9AE, 0x00000003 }, |
| { 0xB9AF, 0x00000000 }, |
| { 0xB9B0, 0x10000000 }, |
| { 0xB828, 0x6C204010 }, |
| { 0xB829, 0x6C204011 }, |
| { 0xB82A, 0x6C204012 }, |
| { 0xB82B, 0x6C204013 }, |
| { 0xB82C, 0x6C204014 }, |
| { 0xB90F, 0x00000004 }, |
| { 0xB910, 0x00000002 }, |
| { 0xB911, 0x00000002 }, |
| { 0xB912, 0x00000002 }, |
| { 0xB913, 0x00000002 }, |
| { 0xB92F, 0x00000004 }, |
| { 0xB930, 0x00000005 }, |
| { 0xB931, 0x00000005 }, |
| { 0xB932, 0x00000005 }, |
| { 0xB933, 0x00000005 }, |
| { 0xB96F, 0x00000001 }, |
| { 0xB970, 0x00000003 }, |
| { 0xB94F, 0x00000004 }, |
| { 0xB950, 0x0000000B }, |
| { 0xB951, 0x0000000B }, |
| { 0xB952, 0x0000000B }, |
| { 0xB953, 0x0000000B }, |
| { 0xB907, 0x00000019 }, |
| { 0xB927, 0x00000019 }, |
| { 0xB947, 0x00000019 }, |
| { 0xB967, 0x00000019 }, |
| { 0xB987, 0x00000019 }, |
| { 0xB906, 0x00220001 }, |
| { 0xB926, 0x00220001 }, |
| { 0xB946, 0x00220001 }, |
| { 0xB966, 0x00220001 }, |
| { 0xB986, 0x00300000 }, |
| { 0xAC40, 0x0340FF41 }, |
| { 0xAC41, 0x03BEFED0 }, |
| { 0xAC42, 0x00331FED }, |
| { 0xAC43, 0x021FFDD3 }, |
| { 0xAC44, 0x5555AAAA }, |
| { 0xAC45, 0x5555AAAA }, |
| { 0xB9BA, 0x00000008 }, |
| }; |
| |
| /* |
| * Get the actual voltage value for the operating point at the specified |
| * frequency |
| */ |
| static inline uint32_t _get_mvolts(struct msm_gpu *gpu, uint32_t freq) |
| { |
| struct drm_device *dev = gpu->dev; |
| struct msm_drm_private *priv = dev->dev_private; |
| struct platform_device *pdev = priv->gpu_pdev; |
| struct dev_pm_opp *opp; |
| u32 ret = 0; |
| |
| opp = dev_pm_opp_find_freq_exact(&pdev->dev, freq, true); |
| |
| if (!IS_ERR(opp)) { |
| ret = dev_pm_opp_get_voltage(opp) / 1000; |
| dev_pm_opp_put(opp); |
| } |
| |
| return ret; |
| } |
| |
| /* Setup thermal limit management */ |
| static void a530_lm_setup(struct msm_gpu *gpu) |
| { |
| struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); |
| struct a5xx_gpu *a5xx_gpu = to_a5xx_gpu(adreno_gpu); |
| unsigned int i; |
| |
| /* Write the block of sequence registers */ |
| for (i = 0; i < ARRAY_SIZE(a5xx_sequence_regs); i++) |
| gpu_write(gpu, a5xx_sequence_regs[i].reg, |
| a5xx_sequence_regs[i].value); |
| |
| /* Hard code the A530 GPU thermal sensor ID for the GPMU */ |
| gpu_write(gpu, REG_A5XX_GPMU_TEMP_SENSOR_ID, 0x60007); |
| gpu_write(gpu, REG_A5XX_GPMU_DELTA_TEMP_THRESHOLD, 0x01); |
| gpu_write(gpu, REG_A5XX_GPMU_TEMP_SENSOR_CONFIG, 0x01); |
| |
| /* Until we get clock scaling 0 is always the active power level */ |
| gpu_write(gpu, REG_A5XX_GPMU_GPMU_VOLTAGE, 0x80000000 | 0); |
| |
| gpu_write(gpu, REG_A5XX_GPMU_BASE_LEAKAGE, a5xx_gpu->lm_leakage); |
| |
| /* The threshold is fixed at 6000 for A530 */ |
| gpu_write(gpu, REG_A5XX_GPMU_GPMU_PWR_THRESHOLD, 0x80000000 | 6000); |
| |
| gpu_write(gpu, REG_A5XX_GPMU_BEC_ENABLE, 0x10001FFF); |
| gpu_write(gpu, REG_A5XX_GDPM_CONFIG1, 0x00201FF1); |
| |
| /* Write the voltage table */ |
| gpu_write(gpu, REG_A5XX_GPMU_BEC_ENABLE, 0x10001FFF); |
| gpu_write(gpu, REG_A5XX_GDPM_CONFIG1, 0x201FF1); |
| |
| gpu_write(gpu, AGC_MSG_STATE, 1); |
| gpu_write(gpu, AGC_MSG_COMMAND, AGC_POWER_CONFIG_PRODUCTION_ID); |
| |
| /* Write the max power - hard coded to 5448 for A530 */ |
| gpu_write(gpu, AGC_MSG_PAYLOAD(0), 5448); |
| gpu_write(gpu, AGC_MSG_PAYLOAD(1), 1); |
| |
| /* |
| * For now just write the one voltage level - we will do more when we |
| * can do scaling |
| */ |
| gpu_write(gpu, AGC_MSG_PAYLOAD(2), _get_mvolts(gpu, gpu->fast_rate)); |
| gpu_write(gpu, AGC_MSG_PAYLOAD(3), gpu->fast_rate / 1000000); |
| |
| gpu_write(gpu, AGC_MSG_PAYLOAD_SIZE, 4 * sizeof(uint32_t)); |
| gpu_write(gpu, AGC_INIT_MSG_MAGIC, AGC_INIT_MSG_VALUE); |
| } |
| |
| #define PAYLOAD_SIZE(_size) ((_size) * sizeof(u32)) |
| #define LM_DCVS_LIMIT 1 |
| #define LEVEL_CONFIG ~(0x303) |
| |
| static void a540_lm_setup(struct msm_gpu *gpu) |
| { |
| struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); |
| u32 config; |
| |
| /* The battery current limiter isn't enabled for A540 */ |
| config = AGC_LM_CONFIG_BCL_DISABLED; |
| config |= adreno_gpu->rev.patchid << AGC_LM_CONFIG_GPU_VERSION_SHIFT; |
| |
| /* For now disable GPMU side throttling */ |
| config |= AGC_LM_CONFIG_THROTTLE_DISABLE; |
| |
| /* Until we get clock scaling 0 is always the active power level */ |
| gpu_write(gpu, REG_A5XX_GPMU_GPMU_VOLTAGE, 0x80000000 | 0); |
| |
| /* Fixed at 6000 for now */ |
| gpu_write(gpu, REG_A5XX_GPMU_GPMU_PWR_THRESHOLD, 0x80000000 | 6000); |
| |
| gpu_write(gpu, AGC_MSG_STATE, 0x80000001); |
| gpu_write(gpu, AGC_MSG_COMMAND, AGC_POWER_CONFIG_PRODUCTION_ID); |
| |
| gpu_write(gpu, AGC_MSG_PAYLOAD(0), 5448); |
| gpu_write(gpu, AGC_MSG_PAYLOAD(1), 1); |
| |
| gpu_write(gpu, AGC_MSG_PAYLOAD(2), _get_mvolts(gpu, gpu->fast_rate)); |
| gpu_write(gpu, AGC_MSG_PAYLOAD(3), gpu->fast_rate / 1000000); |
| |
| gpu_write(gpu, AGC_MSG_PAYLOAD(AGC_LM_CONFIG), config); |
| gpu_write(gpu, AGC_MSG_PAYLOAD(AGC_LEVEL_CONFIG), LEVEL_CONFIG); |
| gpu_write(gpu, AGC_MSG_PAYLOAD_SIZE, |
| PAYLOAD_SIZE(AGC_LEVEL_CONFIG + 1)); |
| |
| gpu_write(gpu, AGC_INIT_MSG_MAGIC, AGC_INIT_MSG_VALUE); |
| } |
| |
| /* Enable SP/TP cpower collapse */ |
| static void a5xx_pc_init(struct msm_gpu *gpu) |
| { |
| gpu_write(gpu, REG_A5XX_GPMU_PWR_COL_INTER_FRAME_CTRL, 0x7F); |
| gpu_write(gpu, REG_A5XX_GPMU_PWR_COL_BINNING_CTRL, 0); |
| gpu_write(gpu, REG_A5XX_GPMU_PWR_COL_INTER_FRAME_HYST, 0xA0080); |
| gpu_write(gpu, REG_A5XX_GPMU_PWR_COL_STAGGER_DELAY, 0x600040); |
| } |
| |
| /* Enable the GPMU microcontroller */ |
| static int a5xx_gpmu_init(struct msm_gpu *gpu) |
| { |
| struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); |
| struct a5xx_gpu *a5xx_gpu = to_a5xx_gpu(adreno_gpu); |
| struct msm_ringbuffer *ring = gpu->rb[0]; |
| |
| if (!a5xx_gpu->gpmu_dwords) |
| return 0; |
| |
| /* Turn off protected mode for this operation */ |
| OUT_PKT7(ring, CP_SET_PROTECTED_MODE, 1); |
| OUT_RING(ring, 0); |
| |
| /* Kick off the IB to load the GPMU microcode */ |
| OUT_PKT7(ring, CP_INDIRECT_BUFFER_PFE, 3); |
| OUT_RING(ring, lower_32_bits(a5xx_gpu->gpmu_iova)); |
| OUT_RING(ring, upper_32_bits(a5xx_gpu->gpmu_iova)); |
| OUT_RING(ring, a5xx_gpu->gpmu_dwords); |
| |
| /* Turn back on protected mode */ |
| OUT_PKT7(ring, CP_SET_PROTECTED_MODE, 1); |
| OUT_RING(ring, 1); |
| |
| a5xx_flush(gpu, ring, true); |
| |
| if (!a5xx_idle(gpu, ring)) { |
| DRM_ERROR("%s: Unable to load GPMU firmware. GPMU will not be active\n", |
| gpu->name); |
| return -EINVAL; |
| } |
| |
| if (adreno_is_a530(adreno_gpu)) |
| gpu_write(gpu, REG_A5XX_GPMU_WFI_CONFIG, 0x4014); |
| |
| /* Kick off the GPMU */ |
| gpu_write(gpu, REG_A5XX_GPMU_CM3_SYSRESET, 0x0); |
| |
| /* |
| * Wait for the GPMU to respond. It isn't fatal if it doesn't, we just |
| * won't have advanced power collapse. |
| */ |
| if (spin_usecs(gpu, 25, REG_A5XX_GPMU_GENERAL_0, 0xFFFFFFFF, |
| 0xBABEFACE)) |
| DRM_ERROR("%s: GPMU firmware initialization timed out\n", |
| gpu->name); |
| |
| if (!adreno_is_a530(adreno_gpu)) { |
| u32 val = gpu_read(gpu, REG_A5XX_GPMU_GENERAL_1); |
| |
| if (val) |
| DRM_ERROR("%s: GPMU firmware initialization failed: %d\n", |
| gpu->name, val); |
| } |
| |
| return 0; |
| } |
| |
| /* Enable limits management */ |
| static void a5xx_lm_enable(struct msm_gpu *gpu) |
| { |
| struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); |
| |
| /* This init sequence only applies to A530 */ |
| if (!adreno_is_a530(adreno_gpu)) |
| return; |
| |
| gpu_write(gpu, REG_A5XX_GDPM_INT_MASK, 0x0); |
| gpu_write(gpu, REG_A5XX_GDPM_INT_EN, 0x0A); |
| gpu_write(gpu, REG_A5XX_GPMU_GPMU_VOLTAGE_INTR_EN_MASK, 0x01); |
| gpu_write(gpu, REG_A5XX_GPMU_TEMP_THRESHOLD_INTR_EN_MASK, 0x50000); |
| gpu_write(gpu, REG_A5XX_GPMU_THROTTLE_UNMASK_FORCE_CTRL, 0x30000); |
| |
| gpu_write(gpu, REG_A5XX_GPMU_CLOCK_THROTTLE_CTRL, 0x011); |
| } |
| |
| int a5xx_power_init(struct msm_gpu *gpu) |
| { |
| struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); |
| int ret; |
| |
| /* Not all A5xx chips have a GPMU */ |
| if (!(adreno_is_a530(adreno_gpu) || adreno_is_a540(adreno_gpu))) |
| return 0; |
| |
| /* Set up the limits management */ |
| if (adreno_is_a530(adreno_gpu)) |
| a530_lm_setup(gpu); |
| else if (adreno_is_a540(adreno_gpu)) |
| a540_lm_setup(gpu); |
| |
| /* Set up SP/TP power collpase */ |
| a5xx_pc_init(gpu); |
| |
| /* Start the GPMU */ |
| ret = a5xx_gpmu_init(gpu); |
| if (ret) |
| return ret; |
| |
| /* Start the limits management */ |
| a5xx_lm_enable(gpu); |
| |
| return 0; |
| } |
| |
| void a5xx_gpmu_ucode_init(struct msm_gpu *gpu) |
| { |
| struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); |
| struct a5xx_gpu *a5xx_gpu = to_a5xx_gpu(adreno_gpu); |
| struct drm_device *drm = gpu->dev; |
| uint32_t dwords = 0, offset = 0, bosize; |
| unsigned int *data, *ptr, *cmds; |
| unsigned int cmds_size; |
| |
| if (!(adreno_is_a530(adreno_gpu) || adreno_is_a540(adreno_gpu))) |
| return; |
| |
| if (a5xx_gpu->gpmu_bo) |
| return; |
| |
| data = (unsigned int *) adreno_gpu->fw[ADRENO_FW_GPMU]->data; |
| |
| /* |
| * The first dword is the size of the remaining data in dwords. Use it |
| * as a checksum of sorts and make sure it matches the actual size of |
| * the firmware that we read |
| */ |
| |
| if (adreno_gpu->fw[ADRENO_FW_GPMU]->size < 8 || |
| (data[0] < 2) || (data[0] >= |
| (adreno_gpu->fw[ADRENO_FW_GPMU]->size >> 2))) |
| return; |
| |
| /* The second dword is an ID - look for 2 (GPMU_FIRMWARE_ID) */ |
| if (data[1] != 2) |
| return; |
| |
| cmds = data + data[2] + 3; |
| cmds_size = data[0] - data[2] - 2; |
| |
| /* |
| * A single type4 opcode can only have so many values attached so |
| * add enough opcodes to load the all the commands |
| */ |
| bosize = (cmds_size + (cmds_size / TYPE4_MAX_PAYLOAD) + 1) << 2; |
| |
| ptr = msm_gem_kernel_new(drm, bosize, |
| MSM_BO_WC | MSM_BO_GPU_READONLY, gpu->aspace, |
| &a5xx_gpu->gpmu_bo, &a5xx_gpu->gpmu_iova); |
| if (IS_ERR(ptr)) |
| return; |
| |
| msm_gem_object_set_name(a5xx_gpu->gpmu_bo, "gpmufw"); |
| |
| while (cmds_size > 0) { |
| int i; |
| uint32_t _size = cmds_size > TYPE4_MAX_PAYLOAD ? |
| TYPE4_MAX_PAYLOAD : cmds_size; |
| |
| ptr[dwords++] = PKT4(REG_A5XX_GPMU_INST_RAM_BASE + offset, |
| _size); |
| |
| for (i = 0; i < _size; i++) |
| ptr[dwords++] = *cmds++; |
| |
| offset += _size; |
| cmds_size -= _size; |
| } |
| |
| msm_gem_put_vaddr(a5xx_gpu->gpmu_bo); |
| a5xx_gpu->gpmu_dwords = dwords; |
| } |