| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2014-2018 The Linux Foundation. All rights reserved. |
| * Copyright (C) 2013 Red Hat |
| * Author: Rob Clark <robdclark@gmail.com> |
| */ |
| |
| #define pr_fmt(fmt) "[drm:%s:%d] " fmt, __func__, __LINE__ |
| |
| #include <linux/debugfs.h> |
| #include <linux/dma-buf.h> |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_uapi.h> |
| #include <drm/drm_damage_helper.h> |
| #include <drm/drm_file.h> |
| #include <drm/drm_gem_atomic_helper.h> |
| |
| #include "msm_drv.h" |
| #include "dpu_kms.h" |
| #include "dpu_formats.h" |
| #include "dpu_hw_sspp.h" |
| #include "dpu_trace.h" |
| #include "dpu_crtc.h" |
| #include "dpu_vbif.h" |
| #include "dpu_plane.h" |
| |
| #define DPU_DEBUG_PLANE(pl, fmt, ...) DRM_DEBUG_ATOMIC("plane%d " fmt,\ |
| (pl) ? (pl)->base.base.id : -1, ##__VA_ARGS__) |
| |
| #define DPU_ERROR_PLANE(pl, fmt, ...) DPU_ERROR("plane%d " fmt,\ |
| (pl) ? (pl)->base.base.id : -1, ##__VA_ARGS__) |
| |
| #define DECIMATED_DIMENSION(dim, deci) (((dim) + ((1 << (deci)) - 1)) >> (deci)) |
| #define PHASE_STEP_SHIFT 21 |
| #define PHASE_STEP_UNIT_SCALE ((int) (1 << PHASE_STEP_SHIFT)) |
| #define PHASE_RESIDUAL 15 |
| |
| #define SHARP_STRENGTH_DEFAULT 32 |
| #define SHARP_EDGE_THR_DEFAULT 112 |
| #define SHARP_SMOOTH_THR_DEFAULT 8 |
| #define SHARP_NOISE_THR_DEFAULT 2 |
| |
| #define DPU_NAME_SIZE 12 |
| |
| #define DPU_PLANE_COLOR_FILL_FLAG BIT(31) |
| #define DPU_ZPOS_MAX 255 |
| |
| /* multirect rect index */ |
| enum { |
| R0, |
| R1, |
| R_MAX |
| }; |
| |
| /* |
| * Default Preload Values |
| */ |
| #define DPU_QSEED3_DEFAULT_PRELOAD_H 0x4 |
| #define DPU_QSEED3_DEFAULT_PRELOAD_V 0x3 |
| #define DPU_QSEED4_DEFAULT_PRELOAD_V 0x2 |
| #define DPU_QSEED4_DEFAULT_PRELOAD_H 0x4 |
| |
| #define DEFAULT_REFRESH_RATE 60 |
| |
| static const uint32_t qcom_compressed_supported_formats[] = { |
| DRM_FORMAT_ABGR8888, |
| DRM_FORMAT_ARGB8888, |
| DRM_FORMAT_XBGR8888, |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_BGR565, |
| |
| DRM_FORMAT_NV12, |
| }; |
| |
| /** |
| * enum dpu_plane_qos - Different qos configurations for each pipe |
| * |
| * @DPU_PLANE_QOS_VBLANK_CTRL: Setup VBLANK qos for the pipe. |
| * @DPU_PLANE_QOS_VBLANK_AMORTIZE: Enables Amortization within pipe. |
| * this configuration is mutually exclusive from VBLANK_CTRL. |
| * @DPU_PLANE_QOS_PANIC_CTRL: Setup panic for the pipe. |
| */ |
| enum dpu_plane_qos { |
| DPU_PLANE_QOS_VBLANK_CTRL = BIT(0), |
| DPU_PLANE_QOS_VBLANK_AMORTIZE = BIT(1), |
| DPU_PLANE_QOS_PANIC_CTRL = BIT(2), |
| }; |
| |
| /* |
| * struct dpu_plane - local dpu plane structure |
| * @aspace: address space pointer |
| * @csc_ptr: Points to dpu_csc_cfg structure to use for current |
| * @mplane_list: List of multirect planes of the same pipe |
| * @catalog: Points to dpu catalog structure |
| * @revalidate: force revalidation of all the plane properties |
| */ |
| struct dpu_plane { |
| struct drm_plane base; |
| |
| struct mutex lock; |
| |
| enum dpu_sspp pipe; |
| uint32_t features; /* capabilities from catalog */ |
| |
| struct dpu_hw_pipe *pipe_hw; |
| struct dpu_hw_pipe_cfg pipe_cfg; |
| struct dpu_hw_pipe_qos_cfg pipe_qos_cfg; |
| uint32_t color_fill; |
| bool is_error; |
| bool is_rt_pipe; |
| bool is_virtual; |
| struct list_head mplane_list; |
| struct dpu_mdss_cfg *catalog; |
| |
| struct dpu_csc_cfg *csc_ptr; |
| |
| const struct dpu_sspp_sub_blks *pipe_sblk; |
| char pipe_name[DPU_NAME_SIZE]; |
| |
| /* debugfs related stuff */ |
| struct dentry *debugfs_root; |
| struct dpu_debugfs_regset32 debugfs_src; |
| struct dpu_debugfs_regset32 debugfs_scaler; |
| struct dpu_debugfs_regset32 debugfs_csc; |
| bool debugfs_default_scale; |
| }; |
| |
| static const uint64_t supported_format_modifiers[] = { |
| DRM_FORMAT_MOD_QCOM_COMPRESSED, |
| DRM_FORMAT_MOD_LINEAR, |
| DRM_FORMAT_MOD_INVALID |
| }; |
| |
| #define to_dpu_plane(x) container_of(x, struct dpu_plane, base) |
| |
| static struct dpu_kms *_dpu_plane_get_kms(struct drm_plane *plane) |
| { |
| struct msm_drm_private *priv = plane->dev->dev_private; |
| |
| return to_dpu_kms(priv->kms); |
| } |
| |
| /** |
| * _dpu_plane_calc_bw - calculate bandwidth required for a plane |
| * @plane: Pointer to drm plane. |
| * @fb: Pointer to framebuffer associated with the given plane |
| * Result: Updates calculated bandwidth in the plane state. |
| * BW Equation: src_w * src_h * bpp * fps * (v_total / v_dest) |
| * Prefill BW Equation: line src bytes * line_time |
| */ |
| static void _dpu_plane_calc_bw(struct drm_plane *plane, |
| struct drm_framebuffer *fb) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| struct dpu_plane_state *pstate; |
| struct drm_display_mode *mode; |
| const struct dpu_format *fmt = NULL; |
| struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane); |
| int src_width, src_height, dst_height, fps; |
| u64 plane_prefill_bw; |
| u64 plane_bw; |
| u32 hw_latency_lines; |
| u64 scale_factor; |
| int vbp, vpw, vfp; |
| |
| pstate = to_dpu_plane_state(plane->state); |
| mode = &plane->state->crtc->mode; |
| |
| fmt = dpu_get_dpu_format_ext(fb->format->format, fb->modifier); |
| |
| src_width = drm_rect_width(&pdpu->pipe_cfg.src_rect); |
| src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect); |
| dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect); |
| fps = drm_mode_vrefresh(mode); |
| vbp = mode->vtotal - mode->vsync_end; |
| vpw = mode->vsync_end - mode->vsync_start; |
| vfp = mode->vsync_start - mode->vdisplay; |
| hw_latency_lines = dpu_kms->catalog->perf.min_prefill_lines; |
| scale_factor = src_height > dst_height ? |
| mult_frac(src_height, 1, dst_height) : 1; |
| |
| plane_bw = |
| src_width * mode->vtotal * fps * fmt->bpp * |
| scale_factor; |
| |
| plane_prefill_bw = |
| src_width * hw_latency_lines * fps * fmt->bpp * |
| scale_factor * mode->vtotal; |
| |
| if ((vbp+vpw) > hw_latency_lines) |
| do_div(plane_prefill_bw, (vbp+vpw)); |
| else if ((vbp+vpw+vfp) < hw_latency_lines) |
| do_div(plane_prefill_bw, (vbp+vpw+vfp)); |
| else |
| do_div(plane_prefill_bw, hw_latency_lines); |
| |
| |
| pstate->plane_fetch_bw = max(plane_bw, plane_prefill_bw); |
| } |
| |
| /** |
| * _dpu_plane_calc_clk - calculate clock required for a plane |
| * @plane: Pointer to drm plane. |
| * Result: Updates calculated clock in the plane state. |
| * Clock equation: dst_w * v_total * fps * (src_h / dst_h) |
| */ |
| static void _dpu_plane_calc_clk(struct drm_plane *plane) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| struct dpu_plane_state *pstate; |
| struct drm_display_mode *mode; |
| int dst_width, src_height, dst_height, fps; |
| |
| pstate = to_dpu_plane_state(plane->state); |
| mode = &plane->state->crtc->mode; |
| |
| src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect); |
| dst_width = drm_rect_width(&pdpu->pipe_cfg.dst_rect); |
| dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect); |
| fps = drm_mode_vrefresh(mode); |
| |
| pstate->plane_clk = |
| dst_width * mode->vtotal * fps; |
| |
| if (src_height > dst_height) { |
| pstate->plane_clk *= src_height; |
| do_div(pstate->plane_clk, dst_height); |
| } |
| } |
| |
| /** |
| * _dpu_plane_calc_fill_level - calculate fill level of the given source format |
| * @plane: Pointer to drm plane |
| * @fmt: Pointer to source buffer format |
| * @src_width: width of source buffer |
| * Return: fill level corresponding to the source buffer/format or 0 if error |
| */ |
| static int _dpu_plane_calc_fill_level(struct drm_plane *plane, |
| const struct dpu_format *fmt, u32 src_width) |
| { |
| struct dpu_plane *pdpu, *tmp; |
| struct dpu_plane_state *pstate; |
| u32 fixed_buff_size; |
| u32 total_fl; |
| |
| if (!fmt || !plane->state || !src_width || !fmt->bpp) { |
| DPU_ERROR("invalid arguments\n"); |
| return 0; |
| } |
| |
| pdpu = to_dpu_plane(plane); |
| pstate = to_dpu_plane_state(plane->state); |
| fixed_buff_size = pdpu->catalog->caps->pixel_ram_size; |
| |
| list_for_each_entry(tmp, &pdpu->mplane_list, mplane_list) { |
| if (!tmp->base.state->visible) |
| continue; |
| DPU_DEBUG("plane%d/%d src_width:%d/%d\n", |
| pdpu->base.base.id, tmp->base.base.id, |
| src_width, |
| drm_rect_width(&tmp->pipe_cfg.src_rect)); |
| src_width = max_t(u32, src_width, |
| drm_rect_width(&tmp->pipe_cfg.src_rect)); |
| } |
| |
| if (fmt->fetch_planes == DPU_PLANE_PSEUDO_PLANAR) { |
| if (fmt->chroma_sample == DPU_CHROMA_420) { |
| /* NV12 */ |
| total_fl = (fixed_buff_size / 2) / |
| ((src_width + 32) * fmt->bpp); |
| } else { |
| /* non NV12 */ |
| total_fl = (fixed_buff_size / 2) * 2 / |
| ((src_width + 32) * fmt->bpp); |
| } |
| } else { |
| if (pstate->multirect_mode == DPU_SSPP_MULTIRECT_PARALLEL) { |
| total_fl = (fixed_buff_size / 2) * 2 / |
| ((src_width + 32) * fmt->bpp); |
| } else { |
| total_fl = (fixed_buff_size) * 2 / |
| ((src_width + 32) * fmt->bpp); |
| } |
| } |
| |
| DPU_DEBUG_PLANE(pdpu, "pnum:%d fmt: %4.4s w:%u fl:%u\n", |
| pdpu->pipe - SSPP_VIG0, |
| (char *)&fmt->base.pixel_format, |
| src_width, total_fl); |
| |
| return total_fl; |
| } |
| |
| /** |
| * _dpu_plane_get_qos_lut - get LUT mapping based on fill level |
| * @tbl: Pointer to LUT table |
| * @total_fl: fill level |
| * Return: LUT setting corresponding to the fill level |
| */ |
| static u64 _dpu_plane_get_qos_lut(const struct dpu_qos_lut_tbl *tbl, |
| u32 total_fl) |
| { |
| int i; |
| |
| if (!tbl || !tbl->nentry || !tbl->entries) |
| return 0; |
| |
| for (i = 0; i < tbl->nentry; i++) |
| if (total_fl <= tbl->entries[i].fl) |
| return tbl->entries[i].lut; |
| |
| /* if last fl is zero, use as default */ |
| if (!tbl->entries[i-1].fl) |
| return tbl->entries[i-1].lut; |
| |
| return 0; |
| } |
| |
| /** |
| * _dpu_plane_set_qos_lut - set QoS LUT of the given plane |
| * @plane: Pointer to drm plane |
| * @fb: Pointer to framebuffer associated with the given plane |
| */ |
| static void _dpu_plane_set_qos_lut(struct drm_plane *plane, |
| struct drm_framebuffer *fb) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| const struct dpu_format *fmt = NULL; |
| u64 qos_lut; |
| u32 total_fl = 0, lut_usage; |
| |
| if (!pdpu->is_rt_pipe) { |
| lut_usage = DPU_QOS_LUT_USAGE_NRT; |
| } else { |
| fmt = dpu_get_dpu_format_ext( |
| fb->format->format, |
| fb->modifier); |
| total_fl = _dpu_plane_calc_fill_level(plane, fmt, |
| drm_rect_width(&pdpu->pipe_cfg.src_rect)); |
| |
| if (fmt && DPU_FORMAT_IS_LINEAR(fmt)) |
| lut_usage = DPU_QOS_LUT_USAGE_LINEAR; |
| else |
| lut_usage = DPU_QOS_LUT_USAGE_MACROTILE; |
| } |
| |
| qos_lut = _dpu_plane_get_qos_lut( |
| &pdpu->catalog->perf.qos_lut_tbl[lut_usage], total_fl); |
| |
| pdpu->pipe_qos_cfg.creq_lut = qos_lut; |
| |
| trace_dpu_perf_set_qos_luts(pdpu->pipe - SSPP_VIG0, |
| (fmt) ? fmt->base.pixel_format : 0, |
| pdpu->is_rt_pipe, total_fl, qos_lut, lut_usage); |
| |
| DPU_DEBUG_PLANE(pdpu, "pnum:%d fmt: %4.4s rt:%d fl:%u lut:0x%llx\n", |
| pdpu->pipe - SSPP_VIG0, |
| fmt ? (char *)&fmt->base.pixel_format : NULL, |
| pdpu->is_rt_pipe, total_fl, qos_lut); |
| |
| pdpu->pipe_hw->ops.setup_creq_lut(pdpu->pipe_hw, &pdpu->pipe_qos_cfg); |
| } |
| |
| /** |
| * _dpu_plane_set_danger_lut - set danger/safe LUT of the given plane |
| * @plane: Pointer to drm plane |
| * @fb: Pointer to framebuffer associated with the given plane |
| */ |
| static void _dpu_plane_set_danger_lut(struct drm_plane *plane, |
| struct drm_framebuffer *fb) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| const struct dpu_format *fmt = NULL; |
| u32 danger_lut, safe_lut; |
| |
| if (!pdpu->is_rt_pipe) { |
| danger_lut = pdpu->catalog->perf.danger_lut_tbl |
| [DPU_QOS_LUT_USAGE_NRT]; |
| safe_lut = pdpu->catalog->perf.safe_lut_tbl |
| [DPU_QOS_LUT_USAGE_NRT]; |
| } else { |
| fmt = dpu_get_dpu_format_ext( |
| fb->format->format, |
| fb->modifier); |
| |
| if (fmt && DPU_FORMAT_IS_LINEAR(fmt)) { |
| danger_lut = pdpu->catalog->perf.danger_lut_tbl |
| [DPU_QOS_LUT_USAGE_LINEAR]; |
| safe_lut = pdpu->catalog->perf.safe_lut_tbl |
| [DPU_QOS_LUT_USAGE_LINEAR]; |
| } else { |
| danger_lut = pdpu->catalog->perf.danger_lut_tbl |
| [DPU_QOS_LUT_USAGE_MACROTILE]; |
| safe_lut = pdpu->catalog->perf.safe_lut_tbl |
| [DPU_QOS_LUT_USAGE_MACROTILE]; |
| } |
| } |
| |
| pdpu->pipe_qos_cfg.danger_lut = danger_lut; |
| pdpu->pipe_qos_cfg.safe_lut = safe_lut; |
| |
| trace_dpu_perf_set_danger_luts(pdpu->pipe - SSPP_VIG0, |
| (fmt) ? fmt->base.pixel_format : 0, |
| (fmt) ? fmt->fetch_mode : 0, |
| pdpu->pipe_qos_cfg.danger_lut, |
| pdpu->pipe_qos_cfg.safe_lut); |
| |
| DPU_DEBUG_PLANE(pdpu, "pnum:%d fmt: %4.4s mode:%d luts[0x%x, 0x%x]\n", |
| pdpu->pipe - SSPP_VIG0, |
| fmt ? (char *)&fmt->base.pixel_format : NULL, |
| fmt ? fmt->fetch_mode : -1, |
| pdpu->pipe_qos_cfg.danger_lut, |
| pdpu->pipe_qos_cfg.safe_lut); |
| |
| pdpu->pipe_hw->ops.setup_danger_safe_lut(pdpu->pipe_hw, |
| &pdpu->pipe_qos_cfg); |
| } |
| |
| /** |
| * _dpu_plane_set_qos_ctrl - set QoS control of the given plane |
| * @plane: Pointer to drm plane |
| * @enable: true to enable QoS control |
| * @flags: QoS control mode (enum dpu_plane_qos) |
| */ |
| static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane, |
| bool enable, u32 flags) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| |
| if (flags & DPU_PLANE_QOS_VBLANK_CTRL) { |
| pdpu->pipe_qos_cfg.creq_vblank = pdpu->pipe_sblk->creq_vblank; |
| pdpu->pipe_qos_cfg.danger_vblank = |
| pdpu->pipe_sblk->danger_vblank; |
| pdpu->pipe_qos_cfg.vblank_en = enable; |
| } |
| |
| if (flags & DPU_PLANE_QOS_VBLANK_AMORTIZE) { |
| /* this feature overrules previous VBLANK_CTRL */ |
| pdpu->pipe_qos_cfg.vblank_en = false; |
| pdpu->pipe_qos_cfg.creq_vblank = 0; /* clear vblank bits */ |
| } |
| |
| if (flags & DPU_PLANE_QOS_PANIC_CTRL) |
| pdpu->pipe_qos_cfg.danger_safe_en = enable; |
| |
| if (!pdpu->is_rt_pipe) { |
| pdpu->pipe_qos_cfg.vblank_en = false; |
| pdpu->pipe_qos_cfg.danger_safe_en = false; |
| } |
| |
| DPU_DEBUG_PLANE(pdpu, "pnum:%d ds:%d vb:%d pri[0x%x, 0x%x] is_rt:%d\n", |
| pdpu->pipe - SSPP_VIG0, |
| pdpu->pipe_qos_cfg.danger_safe_en, |
| pdpu->pipe_qos_cfg.vblank_en, |
| pdpu->pipe_qos_cfg.creq_vblank, |
| pdpu->pipe_qos_cfg.danger_vblank, |
| pdpu->is_rt_pipe); |
| |
| pdpu->pipe_hw->ops.setup_qos_ctrl(pdpu->pipe_hw, |
| &pdpu->pipe_qos_cfg); |
| } |
| |
| /** |
| * _dpu_plane_set_ot_limit - set OT limit for the given plane |
| * @plane: Pointer to drm plane |
| * @crtc: Pointer to drm crtc |
| */ |
| static void _dpu_plane_set_ot_limit(struct drm_plane *plane, |
| struct drm_crtc *crtc) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| struct dpu_vbif_set_ot_params ot_params; |
| struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane); |
| |
| memset(&ot_params, 0, sizeof(ot_params)); |
| ot_params.xin_id = pdpu->pipe_hw->cap->xin_id; |
| ot_params.num = pdpu->pipe_hw->idx - SSPP_NONE; |
| ot_params.width = drm_rect_width(&pdpu->pipe_cfg.src_rect); |
| ot_params.height = drm_rect_height(&pdpu->pipe_cfg.src_rect); |
| ot_params.is_wfd = !pdpu->is_rt_pipe; |
| ot_params.frame_rate = drm_mode_vrefresh(&crtc->mode); |
| ot_params.vbif_idx = VBIF_RT; |
| ot_params.clk_ctrl = pdpu->pipe_hw->cap->clk_ctrl; |
| ot_params.rd = true; |
| |
| dpu_vbif_set_ot_limit(dpu_kms, &ot_params); |
| } |
| |
| /** |
| * _dpu_plane_set_qos_remap - set vbif QoS for the given plane |
| * @plane: Pointer to drm plane |
| */ |
| static void _dpu_plane_set_qos_remap(struct drm_plane *plane) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| struct dpu_vbif_set_qos_params qos_params; |
| struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane); |
| |
| memset(&qos_params, 0, sizeof(qos_params)); |
| qos_params.vbif_idx = VBIF_RT; |
| qos_params.clk_ctrl = pdpu->pipe_hw->cap->clk_ctrl; |
| qos_params.xin_id = pdpu->pipe_hw->cap->xin_id; |
| qos_params.num = pdpu->pipe_hw->idx - SSPP_VIG0; |
| qos_params.is_rt = pdpu->is_rt_pipe; |
| |
| DPU_DEBUG_PLANE(pdpu, "pipe:%d vbif:%d xin:%d rt:%d, clk_ctrl:%d\n", |
| qos_params.num, |
| qos_params.vbif_idx, |
| qos_params.xin_id, qos_params.is_rt, |
| qos_params.clk_ctrl); |
| |
| dpu_vbif_set_qos_remap(dpu_kms, &qos_params); |
| } |
| |
| static void _dpu_plane_set_scanout(struct drm_plane *plane, |
| struct dpu_plane_state *pstate, |
| struct dpu_hw_pipe_cfg *pipe_cfg, |
| struct drm_framebuffer *fb) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base); |
| struct msm_gem_address_space *aspace = kms->base.aspace; |
| int ret; |
| |
| ret = dpu_format_populate_layout(aspace, fb, &pipe_cfg->layout); |
| if (ret == -EAGAIN) |
| DPU_DEBUG_PLANE(pdpu, "not updating same src addrs\n"); |
| else if (ret) |
| DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret); |
| else if (pdpu->pipe_hw->ops.setup_sourceaddress) { |
| trace_dpu_plane_set_scanout(pdpu->pipe_hw->idx, |
| &pipe_cfg->layout, |
| pstate->multirect_index); |
| pdpu->pipe_hw->ops.setup_sourceaddress(pdpu->pipe_hw, pipe_cfg, |
| pstate->multirect_index); |
| } |
| } |
| |
| static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu, |
| struct dpu_plane_state *pstate, |
| uint32_t src_w, uint32_t src_h, uint32_t dst_w, uint32_t dst_h, |
| struct dpu_hw_scaler3_cfg *scale_cfg, |
| const struct dpu_format *fmt, |
| uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v) |
| { |
| uint32_t i; |
| |
| memset(scale_cfg, 0, sizeof(*scale_cfg)); |
| memset(&pstate->pixel_ext, 0, sizeof(struct dpu_hw_pixel_ext)); |
| |
| scale_cfg->phase_step_x[DPU_SSPP_COMP_0] = |
| mult_frac((1 << PHASE_STEP_SHIFT), src_w, dst_w); |
| scale_cfg->phase_step_y[DPU_SSPP_COMP_0] = |
| mult_frac((1 << PHASE_STEP_SHIFT), src_h, dst_h); |
| |
| |
| scale_cfg->phase_step_y[DPU_SSPP_COMP_1_2] = |
| scale_cfg->phase_step_y[DPU_SSPP_COMP_0] / chroma_subsmpl_v; |
| scale_cfg->phase_step_x[DPU_SSPP_COMP_1_2] = |
| scale_cfg->phase_step_x[DPU_SSPP_COMP_0] / chroma_subsmpl_h; |
| |
| scale_cfg->phase_step_x[DPU_SSPP_COMP_2] = |
| scale_cfg->phase_step_x[DPU_SSPP_COMP_1_2]; |
| scale_cfg->phase_step_y[DPU_SSPP_COMP_2] = |
| scale_cfg->phase_step_y[DPU_SSPP_COMP_1_2]; |
| |
| scale_cfg->phase_step_x[DPU_SSPP_COMP_3] = |
| scale_cfg->phase_step_x[DPU_SSPP_COMP_0]; |
| scale_cfg->phase_step_y[DPU_SSPP_COMP_3] = |
| scale_cfg->phase_step_y[DPU_SSPP_COMP_0]; |
| |
| for (i = 0; i < DPU_MAX_PLANES; i++) { |
| scale_cfg->src_width[i] = src_w; |
| scale_cfg->src_height[i] = src_h; |
| if (i == DPU_SSPP_COMP_1_2 || i == DPU_SSPP_COMP_2) { |
| scale_cfg->src_width[i] /= chroma_subsmpl_h; |
| scale_cfg->src_height[i] /= chroma_subsmpl_v; |
| } |
| |
| if (pdpu->pipe_hw->cap->features & |
| BIT(DPU_SSPP_SCALER_QSEED4)) { |
| scale_cfg->preload_x[i] = DPU_QSEED4_DEFAULT_PRELOAD_H; |
| scale_cfg->preload_y[i] = DPU_QSEED4_DEFAULT_PRELOAD_V; |
| } else { |
| scale_cfg->preload_x[i] = DPU_QSEED3_DEFAULT_PRELOAD_H; |
| scale_cfg->preload_y[i] = DPU_QSEED3_DEFAULT_PRELOAD_V; |
| } |
| |
| pstate->pixel_ext.num_ext_pxls_top[i] = |
| scale_cfg->src_height[i]; |
| pstate->pixel_ext.num_ext_pxls_left[i] = |
| scale_cfg->src_width[i]; |
| } |
| if (!(DPU_FORMAT_IS_YUV(fmt)) && (src_h == dst_h) |
| && (src_w == dst_w)) |
| return; |
| |
| scale_cfg->dst_width = dst_w; |
| scale_cfg->dst_height = dst_h; |
| scale_cfg->y_rgb_filter_cfg = DPU_SCALE_BIL; |
| scale_cfg->uv_filter_cfg = DPU_SCALE_BIL; |
| scale_cfg->alpha_filter_cfg = DPU_SCALE_ALPHA_BIL; |
| scale_cfg->lut_flag = 0; |
| scale_cfg->blend_cfg = 1; |
| scale_cfg->enable = 1; |
| } |
| |
| static void _dpu_plane_setup_csc(struct dpu_plane *pdpu) |
| { |
| static const struct dpu_csc_cfg dpu_csc_YUV2RGB_601L = { |
| { |
| /* S15.16 format */ |
| 0x00012A00, 0x00000000, 0x00019880, |
| 0x00012A00, 0xFFFF9B80, 0xFFFF3000, |
| 0x00012A00, 0x00020480, 0x00000000, |
| }, |
| /* signed bias */ |
| { 0xfff0, 0xff80, 0xff80,}, |
| { 0x0, 0x0, 0x0,}, |
| /* unsigned clamp */ |
| { 0x10, 0xeb, 0x10, 0xf0, 0x10, 0xf0,}, |
| { 0x00, 0xff, 0x00, 0xff, 0x00, 0xff,}, |
| }; |
| static const struct dpu_csc_cfg dpu_csc10_YUV2RGB_601L = { |
| { |
| /* S15.16 format */ |
| 0x00012A00, 0x00000000, 0x00019880, |
| 0x00012A00, 0xFFFF9B80, 0xFFFF3000, |
| 0x00012A00, 0x00020480, 0x00000000, |
| }, |
| /* signed bias */ |
| { 0xffc0, 0xfe00, 0xfe00,}, |
| { 0x0, 0x0, 0x0,}, |
| /* unsigned clamp */ |
| { 0x40, 0x3ac, 0x40, 0x3c0, 0x40, 0x3c0,}, |
| { 0x00, 0x3ff, 0x00, 0x3ff, 0x00, 0x3ff,}, |
| }; |
| |
| if (!pdpu) { |
| DPU_ERROR("invalid plane\n"); |
| return; |
| } |
| |
| if (BIT(DPU_SSPP_CSC_10BIT) & pdpu->features) |
| pdpu->csc_ptr = (struct dpu_csc_cfg *)&dpu_csc10_YUV2RGB_601L; |
| else |
| pdpu->csc_ptr = (struct dpu_csc_cfg *)&dpu_csc_YUV2RGB_601L; |
| |
| DPU_DEBUG_PLANE(pdpu, "using 0x%X 0x%X 0x%X...\n", |
| pdpu->csc_ptr->csc_mv[0], |
| pdpu->csc_ptr->csc_mv[1], |
| pdpu->csc_ptr->csc_mv[2]); |
| } |
| |
| static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu, |
| struct dpu_plane_state *pstate, |
| const struct dpu_format *fmt, bool color_fill) |
| { |
| const struct drm_format_info *info = drm_format_info(fmt->base.pixel_format); |
| |
| /* don't chroma subsample if decimating */ |
| /* update scaler. calculate default config for QSEED3 */ |
| _dpu_plane_setup_scaler3(pdpu, pstate, |
| drm_rect_width(&pdpu->pipe_cfg.src_rect), |
| drm_rect_height(&pdpu->pipe_cfg.src_rect), |
| drm_rect_width(&pdpu->pipe_cfg.dst_rect), |
| drm_rect_height(&pdpu->pipe_cfg.dst_rect), |
| &pstate->scaler3_cfg, fmt, |
| info->hsub, info->vsub); |
| } |
| |
| /** |
| * _dpu_plane_color_fill - enables color fill on plane |
| * @pdpu: Pointer to DPU plane object |
| * @color: RGB fill color value, [23..16] Blue, [15..8] Green, [7..0] Red |
| * @alpha: 8-bit fill alpha value, 255 selects 100% alpha |
| * Returns: 0 on success |
| */ |
| static int _dpu_plane_color_fill(struct dpu_plane *pdpu, |
| uint32_t color, uint32_t alpha) |
| { |
| const struct dpu_format *fmt; |
| const struct drm_plane *plane = &pdpu->base; |
| struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state); |
| |
| DPU_DEBUG_PLANE(pdpu, "\n"); |
| |
| /* |
| * select fill format to match user property expectation, |
| * h/w only supports RGB variants |
| */ |
| fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888); |
| |
| /* update sspp */ |
| if (fmt && pdpu->pipe_hw->ops.setup_solidfill) { |
| pdpu->pipe_hw->ops.setup_solidfill(pdpu->pipe_hw, |
| (color & 0xFFFFFF) | ((alpha & 0xFF) << 24), |
| pstate->multirect_index); |
| |
| /* override scaler/decimation if solid fill */ |
| pdpu->pipe_cfg.src_rect.x1 = 0; |
| pdpu->pipe_cfg.src_rect.y1 = 0; |
| pdpu->pipe_cfg.src_rect.x2 = |
| drm_rect_width(&pdpu->pipe_cfg.dst_rect); |
| pdpu->pipe_cfg.src_rect.y2 = |
| drm_rect_height(&pdpu->pipe_cfg.dst_rect); |
| _dpu_plane_setup_scaler(pdpu, pstate, fmt, true); |
| |
| if (pdpu->pipe_hw->ops.setup_format) |
| pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw, |
| fmt, DPU_SSPP_SOLID_FILL, |
| pstate->multirect_index); |
| |
| if (pdpu->pipe_hw->ops.setup_rects) |
| pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw, |
| &pdpu->pipe_cfg, |
| pstate->multirect_index); |
| |
| if (pdpu->pipe_hw->ops.setup_pe) |
| pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw, |
| &pstate->pixel_ext); |
| |
| if (pdpu->pipe_hw->ops.setup_scaler && |
| pstate->multirect_index != DPU_SSPP_RECT_1) |
| pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw, |
| &pdpu->pipe_cfg, &pstate->pixel_ext, |
| &pstate->scaler3_cfg); |
| } |
| |
| return 0; |
| } |
| |
| void dpu_plane_clear_multirect(const struct drm_plane_state *drm_state) |
| { |
| struct dpu_plane_state *pstate = to_dpu_plane_state(drm_state); |
| |
| pstate->multirect_index = DPU_SSPP_RECT_SOLO; |
| pstate->multirect_mode = DPU_SSPP_MULTIRECT_NONE; |
| } |
| |
| int dpu_plane_validate_multirect_v2(struct dpu_multirect_plane_states *plane) |
| { |
| struct dpu_plane_state *pstate[R_MAX]; |
| const struct drm_plane_state *drm_state[R_MAX]; |
| struct drm_rect src[R_MAX], dst[R_MAX]; |
| struct dpu_plane *dpu_plane[R_MAX]; |
| const struct dpu_format *fmt[R_MAX]; |
| int i, buffer_lines; |
| unsigned int max_tile_height = 1; |
| bool parallel_fetch_qualified = true; |
| bool has_tiled_rect = false; |
| |
| for (i = 0; i < R_MAX; i++) { |
| const struct msm_format *msm_fmt; |
| |
| drm_state[i] = i ? plane->r1 : plane->r0; |
| msm_fmt = msm_framebuffer_format(drm_state[i]->fb); |
| fmt[i] = to_dpu_format(msm_fmt); |
| |
| if (DPU_FORMAT_IS_UBWC(fmt[i])) { |
| has_tiled_rect = true; |
| if (fmt[i]->tile_height > max_tile_height) |
| max_tile_height = fmt[i]->tile_height; |
| } |
| } |
| |
| for (i = 0; i < R_MAX; i++) { |
| int width_threshold; |
| |
| pstate[i] = to_dpu_plane_state(drm_state[i]); |
| dpu_plane[i] = to_dpu_plane(drm_state[i]->plane); |
| |
| if (pstate[i] == NULL) { |
| DPU_ERROR("DPU plane state of plane id %d is NULL\n", |
| drm_state[i]->plane->base.id); |
| return -EINVAL; |
| } |
| |
| src[i].x1 = drm_state[i]->src_x >> 16; |
| src[i].y1 = drm_state[i]->src_y >> 16; |
| src[i].x2 = src[i].x1 + (drm_state[i]->src_w >> 16); |
| src[i].y2 = src[i].y1 + (drm_state[i]->src_h >> 16); |
| |
| dst[i] = drm_plane_state_dest(drm_state[i]); |
| |
| if (drm_rect_calc_hscale(&src[i], &dst[i], 1, 1) != 1 || |
| drm_rect_calc_vscale(&src[i], &dst[i], 1, 1) != 1) { |
| DPU_ERROR_PLANE(dpu_plane[i], |
| "scaling is not supported in multirect mode\n"); |
| return -EINVAL; |
| } |
| |
| if (DPU_FORMAT_IS_YUV(fmt[i])) { |
| DPU_ERROR_PLANE(dpu_plane[i], |
| "Unsupported format for multirect mode\n"); |
| return -EINVAL; |
| } |
| |
| /** |
| * SSPP PD_MEM is split half - one for each RECT. |
| * Tiled formats need 5 lines of buffering while fetching |
| * whereas linear formats need only 2 lines. |
| * So we cannot support more than half of the supported SSPP |
| * width for tiled formats. |
| */ |
| width_threshold = dpu_plane[i]->catalog->caps->max_linewidth; |
| if (has_tiled_rect) |
| width_threshold /= 2; |
| |
| if (parallel_fetch_qualified && |
| drm_rect_width(&src[i]) > width_threshold) |
| parallel_fetch_qualified = false; |
| |
| } |
| |
| /* Validate RECT's and set the mode */ |
| |
| /* Prefer PARALLEL FETCH Mode over TIME_MX Mode */ |
| if (parallel_fetch_qualified) { |
| pstate[R0]->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; |
| pstate[R1]->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; |
| |
| goto done; |
| } |
| |
| /* TIME_MX Mode */ |
| buffer_lines = 2 * max_tile_height; |
| |
| if (dst[R1].y1 >= dst[R0].y2 + buffer_lines || |
| dst[R0].y1 >= dst[R1].y2 + buffer_lines) { |
| pstate[R0]->multirect_mode = DPU_SSPP_MULTIRECT_TIME_MX; |
| pstate[R1]->multirect_mode = DPU_SSPP_MULTIRECT_TIME_MX; |
| } else { |
| DPU_ERROR( |
| "No multirect mode possible for the planes (%d - %d)\n", |
| drm_state[R0]->plane->base.id, |
| drm_state[R1]->plane->base.id); |
| return -EINVAL; |
| } |
| |
| done: |
| if (dpu_plane[R0]->is_virtual) { |
| pstate[R0]->multirect_index = DPU_SSPP_RECT_1; |
| pstate[R1]->multirect_index = DPU_SSPP_RECT_0; |
| } else { |
| pstate[R0]->multirect_index = DPU_SSPP_RECT_0; |
| pstate[R1]->multirect_index = DPU_SSPP_RECT_1; |
| } |
| |
| DPU_DEBUG_PLANE(dpu_plane[R0], "R0: %d - %d\n", |
| pstate[R0]->multirect_mode, pstate[R0]->multirect_index); |
| DPU_DEBUG_PLANE(dpu_plane[R1], "R1: %d - %d\n", |
| pstate[R1]->multirect_mode, pstate[R1]->multirect_index); |
| return 0; |
| } |
| |
| /** |
| * dpu_plane_get_ctl_flush - get control flush for the given plane |
| * @plane: Pointer to drm plane structure |
| * @ctl: Pointer to hardware control driver |
| * @flush_sspp: Pointer to sspp flush control word |
| */ |
| void dpu_plane_get_ctl_flush(struct drm_plane *plane, struct dpu_hw_ctl *ctl, |
| u32 *flush_sspp) |
| { |
| *flush_sspp = ctl->ops.get_bitmask_sspp(ctl, dpu_plane_pipe(plane)); |
| } |
| |
| static int dpu_plane_prepare_fb(struct drm_plane *plane, |
| struct drm_plane_state *new_state) |
| { |
| struct drm_framebuffer *fb = new_state->fb; |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| struct dpu_plane_state *pstate = to_dpu_plane_state(new_state); |
| struct dpu_hw_fmt_layout layout; |
| struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base); |
| int ret; |
| |
| if (!new_state->fb) |
| return 0; |
| |
| DPU_DEBUG_PLANE(pdpu, "FB[%u]\n", fb->base.id); |
| |
| /* cache aspace */ |
| pstate->aspace = kms->base.aspace; |
| |
| /* |
| * TODO: Need to sort out the msm_framebuffer_prepare() call below so |
| * we can use msm_atomic_prepare_fb() instead of doing the |
| * implicit fence and fb prepare by hand here. |
| */ |
| drm_gem_plane_helper_prepare_fb(plane, new_state); |
| |
| if (pstate->aspace) { |
| ret = msm_framebuffer_prepare(new_state->fb, |
| pstate->aspace); |
| if (ret) { |
| DPU_ERROR("failed to prepare framebuffer\n"); |
| return ret; |
| } |
| } |
| |
| /* validate framebuffer layout before commit */ |
| ret = dpu_format_populate_layout(pstate->aspace, |
| new_state->fb, &layout); |
| if (ret) { |
| DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void dpu_plane_cleanup_fb(struct drm_plane *plane, |
| struct drm_plane_state *old_state) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| struct dpu_plane_state *old_pstate; |
| |
| if (!old_state || !old_state->fb) |
| return; |
| |
| old_pstate = to_dpu_plane_state(old_state); |
| |
| DPU_DEBUG_PLANE(pdpu, "FB[%u]\n", old_state->fb->base.id); |
| |
| msm_framebuffer_cleanup(old_state->fb, old_pstate->aspace); |
| } |
| |
| static bool dpu_plane_validate_src(struct drm_rect *src, |
| struct drm_rect *fb_rect, |
| uint32_t min_src_size) |
| { |
| /* Ensure fb size is supported */ |
| if (drm_rect_width(fb_rect) > MAX_IMG_WIDTH || |
| drm_rect_height(fb_rect) > MAX_IMG_HEIGHT) |
| return false; |
| |
| /* Ensure src rect is above the minimum size */ |
| if (drm_rect_width(src) < min_src_size || |
| drm_rect_height(src) < min_src_size) |
| return false; |
| |
| /* Ensure src is fully encapsulated in fb */ |
| return drm_rect_intersect(fb_rect, src) && |
| drm_rect_equals(fb_rect, src); |
| } |
| |
| static int dpu_plane_atomic_check(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, |
| plane); |
| int ret = 0, min_scale; |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state); |
| const struct drm_crtc_state *crtc_state = NULL; |
| const struct dpu_format *fmt; |
| struct drm_rect src, dst, fb_rect = { 0 }; |
| uint32_t min_src_size, max_linewidth; |
| |
| if (new_plane_state->crtc) |
| crtc_state = drm_atomic_get_new_crtc_state(state, |
| new_plane_state->crtc); |
| |
| min_scale = FRAC_16_16(1, pdpu->pipe_sblk->maxupscale); |
| ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state, |
| min_scale, |
| pdpu->pipe_sblk->maxdwnscale << 16, |
| true, true); |
| if (ret) { |
| DPU_DEBUG_PLANE(pdpu, "Check plane state failed (%d)\n", ret); |
| return ret; |
| } |
| if (!new_plane_state->visible) |
| return 0; |
| |
| src.x1 = new_plane_state->src_x >> 16; |
| src.y1 = new_plane_state->src_y >> 16; |
| src.x2 = src.x1 + (new_plane_state->src_w >> 16); |
| src.y2 = src.y1 + (new_plane_state->src_h >> 16); |
| |
| dst = drm_plane_state_dest(new_plane_state); |
| |
| fb_rect.x2 = new_plane_state->fb->width; |
| fb_rect.y2 = new_plane_state->fb->height; |
| |
| max_linewidth = pdpu->catalog->caps->max_linewidth; |
| |
| fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb)); |
| |
| min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1; |
| |
| if (DPU_FORMAT_IS_YUV(fmt) && |
| (!(pdpu->features & DPU_SSPP_SCALER) || |
| !(pdpu->features & (BIT(DPU_SSPP_CSC) |
| | BIT(DPU_SSPP_CSC_10BIT))))) { |
| DPU_DEBUG_PLANE(pdpu, |
| "plane doesn't have scaler/csc for yuv\n"); |
| return -EINVAL; |
| |
| /* check src bounds */ |
| } else if (!dpu_plane_validate_src(&src, &fb_rect, min_src_size)) { |
| DPU_DEBUG_PLANE(pdpu, "invalid source " DRM_RECT_FMT "\n", |
| DRM_RECT_ARG(&src)); |
| return -E2BIG; |
| |
| /* valid yuv image */ |
| } else if (DPU_FORMAT_IS_YUV(fmt) && |
| (src.x1 & 0x1 || src.y1 & 0x1 || |
| drm_rect_width(&src) & 0x1 || |
| drm_rect_height(&src) & 0x1)) { |
| DPU_DEBUG_PLANE(pdpu, "invalid yuv source " DRM_RECT_FMT "\n", |
| DRM_RECT_ARG(&src)); |
| return -EINVAL; |
| |
| /* min dst support */ |
| } else if (drm_rect_width(&dst) < 0x1 || drm_rect_height(&dst) < 0x1) { |
| DPU_DEBUG_PLANE(pdpu, "invalid dest rect " DRM_RECT_FMT "\n", |
| DRM_RECT_ARG(&dst)); |
| return -EINVAL; |
| |
| /* check decimated source width */ |
| } else if (drm_rect_width(&src) > max_linewidth) { |
| DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n", |
| DRM_RECT_ARG(&src), max_linewidth); |
| return -E2BIG; |
| } |
| |
| pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state); |
| |
| return 0; |
| } |
| |
| void dpu_plane_flush(struct drm_plane *plane) |
| { |
| struct dpu_plane *pdpu; |
| struct dpu_plane_state *pstate; |
| |
| if (!plane || !plane->state) { |
| DPU_ERROR("invalid plane\n"); |
| return; |
| } |
| |
| pdpu = to_dpu_plane(plane); |
| pstate = to_dpu_plane_state(plane->state); |
| |
| /* |
| * These updates have to be done immediately before the plane flush |
| * timing, and may not be moved to the atomic_update/mode_set functions. |
| */ |
| if (pdpu->is_error) |
| /* force white frame with 100% alpha pipe output on error */ |
| _dpu_plane_color_fill(pdpu, 0xFFFFFF, 0xFF); |
| else if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) |
| /* force 100% alpha */ |
| _dpu_plane_color_fill(pdpu, pdpu->color_fill, 0xFF); |
| else if (pdpu->pipe_hw && pdpu->csc_ptr && pdpu->pipe_hw->ops.setup_csc) |
| pdpu->pipe_hw->ops.setup_csc(pdpu->pipe_hw, pdpu->csc_ptr); |
| |
| /* flag h/w flush complete */ |
| if (plane->state) |
| pstate->pending = false; |
| } |
| |
| /** |
| * dpu_plane_set_error: enable/disable error condition |
| * @plane: pointer to drm_plane structure |
| * @error: error value to set |
| */ |
| void dpu_plane_set_error(struct drm_plane *plane, bool error) |
| { |
| struct dpu_plane *pdpu; |
| |
| if (!plane) |
| return; |
| |
| pdpu = to_dpu_plane(plane); |
| pdpu->is_error = error; |
| } |
| |
| static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) |
| { |
| uint32_t src_flags; |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| struct drm_plane_state *state = plane->state; |
| struct dpu_plane_state *pstate = to_dpu_plane_state(state); |
| struct drm_crtc *crtc = state->crtc; |
| struct drm_framebuffer *fb = state->fb; |
| bool is_rt_pipe, update_qos_remap; |
| const struct dpu_format *fmt = |
| to_dpu_format(msm_framebuffer_format(fb)); |
| |
| memset(&(pdpu->pipe_cfg), 0, sizeof(struct dpu_hw_pipe_cfg)); |
| |
| _dpu_plane_set_scanout(plane, pstate, &pdpu->pipe_cfg, fb); |
| |
| pstate->pending = true; |
| |
| is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT); |
| _dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL); |
| |
| DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT |
| ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src), |
| crtc->base.id, DRM_RECT_ARG(&state->dst), |
| (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt)); |
| |
| pdpu->pipe_cfg.src_rect = state->src; |
| |
| /* state->src is 16.16, src_rect is not */ |
| pdpu->pipe_cfg.src_rect.x1 >>= 16; |
| pdpu->pipe_cfg.src_rect.x2 >>= 16; |
| pdpu->pipe_cfg.src_rect.y1 >>= 16; |
| pdpu->pipe_cfg.src_rect.y2 >>= 16; |
| |
| pdpu->pipe_cfg.dst_rect = state->dst; |
| |
| _dpu_plane_setup_scaler(pdpu, pstate, fmt, false); |
| |
| /* override for color fill */ |
| if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) { |
| /* skip remaining processing on color fill */ |
| return; |
| } |
| |
| if (pdpu->pipe_hw->ops.setup_rects) { |
| pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw, |
| &pdpu->pipe_cfg, |
| pstate->multirect_index); |
| } |
| |
| if (pdpu->pipe_hw->ops.setup_pe && |
| (pstate->multirect_index != DPU_SSPP_RECT_1)) |
| pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw, |
| &pstate->pixel_ext); |
| |
| /** |
| * when programmed in multirect mode, scalar block will be |
| * bypassed. Still we need to update alpha and bitwidth |
| * ONLY for RECT0 |
| */ |
| if (pdpu->pipe_hw->ops.setup_scaler && |
| pstate->multirect_index != DPU_SSPP_RECT_1) |
| pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw, |
| &pdpu->pipe_cfg, &pstate->pixel_ext, |
| &pstate->scaler3_cfg); |
| |
| if (pdpu->pipe_hw->ops.setup_multirect) |
| pdpu->pipe_hw->ops.setup_multirect( |
| pdpu->pipe_hw, |
| pstate->multirect_index, |
| pstate->multirect_mode); |
| |
| if (pdpu->pipe_hw->ops.setup_format) { |
| unsigned int rotation; |
| |
| src_flags = 0x0; |
| |
| rotation = drm_rotation_simplify(state->rotation, |
| DRM_MODE_ROTATE_0 | |
| DRM_MODE_REFLECT_X | |
| DRM_MODE_REFLECT_Y); |
| |
| if (rotation & DRM_MODE_REFLECT_X) |
| src_flags |= DPU_SSPP_FLIP_LR; |
| |
| if (rotation & DRM_MODE_REFLECT_Y) |
| src_flags |= DPU_SSPP_FLIP_UD; |
| |
| /* update format */ |
| pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw, fmt, src_flags, |
| pstate->multirect_index); |
| |
| if (pdpu->pipe_hw->ops.setup_cdp) { |
| struct dpu_hw_pipe_cdp_cfg *cdp_cfg = &pstate->cdp_cfg; |
| |
| memset(cdp_cfg, 0, sizeof(struct dpu_hw_pipe_cdp_cfg)); |
| |
| cdp_cfg->enable = pdpu->catalog->perf.cdp_cfg |
| [DPU_PERF_CDP_USAGE_RT].rd_enable; |
| cdp_cfg->ubwc_meta_enable = |
| DPU_FORMAT_IS_UBWC(fmt); |
| cdp_cfg->tile_amortize_enable = |
| DPU_FORMAT_IS_UBWC(fmt) || |
| DPU_FORMAT_IS_TILE(fmt); |
| cdp_cfg->preload_ahead = DPU_SSPP_CDP_PRELOAD_AHEAD_64; |
| |
| pdpu->pipe_hw->ops.setup_cdp(pdpu->pipe_hw, cdp_cfg); |
| } |
| |
| /* update csc */ |
| if (DPU_FORMAT_IS_YUV(fmt)) |
| _dpu_plane_setup_csc(pdpu); |
| else |
| pdpu->csc_ptr = NULL; |
| } |
| |
| _dpu_plane_set_qos_lut(plane, fb); |
| _dpu_plane_set_danger_lut(plane, fb); |
| |
| if (plane->type != DRM_PLANE_TYPE_CURSOR) { |
| _dpu_plane_set_qos_ctrl(plane, true, DPU_PLANE_QOS_PANIC_CTRL); |
| _dpu_plane_set_ot_limit(plane, crtc); |
| } |
| |
| update_qos_remap = (is_rt_pipe != pdpu->is_rt_pipe) || |
| pstate->needs_qos_remap; |
| |
| if (update_qos_remap) { |
| if (is_rt_pipe != pdpu->is_rt_pipe) |
| pdpu->is_rt_pipe = is_rt_pipe; |
| else if (pstate->needs_qos_remap) |
| pstate->needs_qos_remap = false; |
| _dpu_plane_set_qos_remap(plane); |
| } |
| |
| _dpu_plane_calc_bw(plane, fb); |
| |
| _dpu_plane_calc_clk(plane); |
| } |
| |
| static void _dpu_plane_atomic_disable(struct drm_plane *plane) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| struct drm_plane_state *state = plane->state; |
| struct dpu_plane_state *pstate = to_dpu_plane_state(state); |
| |
| trace_dpu_plane_disable(DRMID(plane), is_dpu_plane_virtual(plane), |
| pstate->multirect_mode); |
| |
| pstate->pending = true; |
| |
| if (is_dpu_plane_virtual(plane) && |
| pdpu->pipe_hw && pdpu->pipe_hw->ops.setup_multirect) |
| pdpu->pipe_hw->ops.setup_multirect(pdpu->pipe_hw, |
| DPU_SSPP_RECT_SOLO, DPU_SSPP_MULTIRECT_NONE); |
| } |
| |
| static void dpu_plane_atomic_update(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, |
| plane); |
| |
| pdpu->is_error = false; |
| |
| DPU_DEBUG_PLANE(pdpu, "\n"); |
| |
| if (!new_state->visible) { |
| _dpu_plane_atomic_disable(plane); |
| } else { |
| dpu_plane_sspp_atomic_update(plane); |
| } |
| } |
| |
| static void dpu_plane_destroy(struct drm_plane *plane) |
| { |
| struct dpu_plane *pdpu = plane ? to_dpu_plane(plane) : NULL; |
| |
| DPU_DEBUG_PLANE(pdpu, "\n"); |
| |
| if (pdpu) { |
| _dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL); |
| |
| mutex_destroy(&pdpu->lock); |
| |
| /* this will destroy the states as well */ |
| drm_plane_cleanup(plane); |
| |
| dpu_hw_sspp_destroy(pdpu->pipe_hw); |
| |
| kfree(pdpu); |
| } |
| } |
| |
| static void dpu_plane_destroy_state(struct drm_plane *plane, |
| struct drm_plane_state *state) |
| { |
| __drm_atomic_helper_plane_destroy_state(state); |
| kfree(to_dpu_plane_state(state)); |
| } |
| |
| static struct drm_plane_state * |
| dpu_plane_duplicate_state(struct drm_plane *plane) |
| { |
| struct dpu_plane *pdpu; |
| struct dpu_plane_state *pstate; |
| struct dpu_plane_state *old_state; |
| |
| if (!plane) { |
| DPU_ERROR("invalid plane\n"); |
| return NULL; |
| } else if (!plane->state) { |
| DPU_ERROR("invalid plane state\n"); |
| return NULL; |
| } |
| |
| old_state = to_dpu_plane_state(plane->state); |
| pdpu = to_dpu_plane(plane); |
| pstate = kmemdup(old_state, sizeof(*old_state), GFP_KERNEL); |
| if (!pstate) { |
| DPU_ERROR_PLANE(pdpu, "failed to allocate state\n"); |
| return NULL; |
| } |
| |
| DPU_DEBUG_PLANE(pdpu, "\n"); |
| |
| pstate->pending = false; |
| |
| __drm_atomic_helper_plane_duplicate_state(plane, &pstate->base); |
| |
| return &pstate->base; |
| } |
| |
| static void dpu_plane_reset(struct drm_plane *plane) |
| { |
| struct dpu_plane *pdpu; |
| struct dpu_plane_state *pstate; |
| |
| if (!plane) { |
| DPU_ERROR("invalid plane\n"); |
| return; |
| } |
| |
| pdpu = to_dpu_plane(plane); |
| DPU_DEBUG_PLANE(pdpu, "\n"); |
| |
| /* remove previous state, if present */ |
| if (plane->state) { |
| dpu_plane_destroy_state(plane, plane->state); |
| plane->state = NULL; |
| } |
| |
| pstate = kzalloc(sizeof(*pstate), GFP_KERNEL); |
| if (!pstate) { |
| DPU_ERROR_PLANE(pdpu, "failed to allocate state\n"); |
| return; |
| } |
| |
| __drm_atomic_helper_plane_reset(plane, &pstate->base); |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| static void dpu_plane_danger_signal_ctrl(struct drm_plane *plane, bool enable) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane); |
| |
| if (!pdpu->is_rt_pipe) |
| return; |
| |
| pm_runtime_get_sync(&dpu_kms->pdev->dev); |
| _dpu_plane_set_qos_ctrl(plane, enable, DPU_PLANE_QOS_PANIC_CTRL); |
| pm_runtime_put_sync(&dpu_kms->pdev->dev); |
| } |
| |
| static ssize_t _dpu_plane_danger_read(struct file *file, |
| char __user *buff, size_t count, loff_t *ppos) |
| { |
| struct dpu_kms *kms = file->private_data; |
| int len; |
| char buf[40]; |
| |
| len = scnprintf(buf, sizeof(buf), "%d\n", !kms->has_danger_ctrl); |
| |
| return simple_read_from_buffer(buff, count, ppos, buf, len); |
| } |
| |
| static void _dpu_plane_set_danger_state(struct dpu_kms *kms, bool enable) |
| { |
| struct drm_plane *plane; |
| |
| drm_for_each_plane(plane, kms->dev) { |
| if (plane->fb && plane->state) { |
| dpu_plane_danger_signal_ctrl(plane, enable); |
| DPU_DEBUG("plane:%d img:%dx%d ", |
| plane->base.id, plane->fb->width, |
| plane->fb->height); |
| DPU_DEBUG("src[%d,%d,%d,%d] dst[%d,%d,%d,%d]\n", |
| plane->state->src_x >> 16, |
| plane->state->src_y >> 16, |
| plane->state->src_w >> 16, |
| plane->state->src_h >> 16, |
| plane->state->crtc_x, plane->state->crtc_y, |
| plane->state->crtc_w, plane->state->crtc_h); |
| } else { |
| DPU_DEBUG("Inactive plane:%d\n", plane->base.id); |
| } |
| } |
| } |
| |
| static ssize_t _dpu_plane_danger_write(struct file *file, |
| const char __user *user_buf, size_t count, loff_t *ppos) |
| { |
| struct dpu_kms *kms = file->private_data; |
| int disable_panic; |
| int ret; |
| |
| ret = kstrtouint_from_user(user_buf, count, 0, &disable_panic); |
| if (ret) |
| return ret; |
| |
| if (disable_panic) { |
| /* Disable panic signal for all active pipes */ |
| DPU_DEBUG("Disabling danger:\n"); |
| _dpu_plane_set_danger_state(kms, false); |
| kms->has_danger_ctrl = false; |
| } else { |
| /* Enable panic signal for all active pipes */ |
| DPU_DEBUG("Enabling danger:\n"); |
| kms->has_danger_ctrl = true; |
| _dpu_plane_set_danger_state(kms, true); |
| } |
| |
| return count; |
| } |
| |
| static const struct file_operations dpu_plane_danger_enable = { |
| .open = simple_open, |
| .read = _dpu_plane_danger_read, |
| .write = _dpu_plane_danger_write, |
| }; |
| |
| static int _dpu_plane_init_debugfs(struct drm_plane *plane) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| struct dpu_kms *kms = _dpu_plane_get_kms(plane); |
| const struct dpu_sspp_cfg *cfg = pdpu->pipe_hw->cap; |
| const struct dpu_sspp_sub_blks *sblk = cfg->sblk; |
| |
| /* create overall sub-directory for the pipe */ |
| pdpu->debugfs_root = |
| debugfs_create_dir(pdpu->pipe_name, |
| plane->dev->primary->debugfs_root); |
| |
| /* don't error check these */ |
| debugfs_create_x32("features", 0600, |
| pdpu->debugfs_root, &pdpu->features); |
| |
| /* add register dump support */ |
| dpu_debugfs_setup_regset32(&pdpu->debugfs_src, |
| sblk->src_blk.base + cfg->base, |
| sblk->src_blk.len, |
| kms); |
| dpu_debugfs_create_regset32("src_blk", 0400, |
| pdpu->debugfs_root, &pdpu->debugfs_src); |
| |
| if (cfg->features & BIT(DPU_SSPP_SCALER_QSEED3) || |
| cfg->features & BIT(DPU_SSPP_SCALER_QSEED3LITE) || |
| cfg->features & BIT(DPU_SSPP_SCALER_QSEED2) || |
| cfg->features & BIT(DPU_SSPP_SCALER_QSEED4)) { |
| dpu_debugfs_setup_regset32(&pdpu->debugfs_scaler, |
| sblk->scaler_blk.base + cfg->base, |
| sblk->scaler_blk.len, |
| kms); |
| dpu_debugfs_create_regset32("scaler_blk", 0400, |
| pdpu->debugfs_root, |
| &pdpu->debugfs_scaler); |
| debugfs_create_bool("default_scaling", |
| 0600, |
| pdpu->debugfs_root, |
| &pdpu->debugfs_default_scale); |
| } |
| |
| if (cfg->features & BIT(DPU_SSPP_CSC) || |
| cfg->features & BIT(DPU_SSPP_CSC_10BIT)) { |
| dpu_debugfs_setup_regset32(&pdpu->debugfs_csc, |
| sblk->csc_blk.base + cfg->base, |
| sblk->csc_blk.len, |
| kms); |
| dpu_debugfs_create_regset32("csc_blk", 0400, |
| pdpu->debugfs_root, &pdpu->debugfs_csc); |
| } |
| |
| debugfs_create_u32("xin_id", |
| 0400, |
| pdpu->debugfs_root, |
| (u32 *) &cfg->xin_id); |
| debugfs_create_u32("clk_ctrl", |
| 0400, |
| pdpu->debugfs_root, |
| (u32 *) &cfg->clk_ctrl); |
| debugfs_create_x32("creq_vblank", |
| 0600, |
| pdpu->debugfs_root, |
| (u32 *) &sblk->creq_vblank); |
| debugfs_create_x32("danger_vblank", |
| 0600, |
| pdpu->debugfs_root, |
| (u32 *) &sblk->danger_vblank); |
| |
| debugfs_create_file("disable_danger", |
| 0600, |
| pdpu->debugfs_root, |
| kms, &dpu_plane_danger_enable); |
| |
| return 0; |
| } |
| #else |
| static int _dpu_plane_init_debugfs(struct drm_plane *plane) |
| { |
| return 0; |
| } |
| #endif |
| |
| static int dpu_plane_late_register(struct drm_plane *plane) |
| { |
| return _dpu_plane_init_debugfs(plane); |
| } |
| |
| static void dpu_plane_early_unregister(struct drm_plane *plane) |
| { |
| struct dpu_plane *pdpu = to_dpu_plane(plane); |
| |
| debugfs_remove_recursive(pdpu->debugfs_root); |
| } |
| |
| static bool dpu_plane_format_mod_supported(struct drm_plane *plane, |
| uint32_t format, uint64_t modifier) |
| { |
| if (modifier == DRM_FORMAT_MOD_LINEAR) |
| return true; |
| |
| if (modifier == DRM_FORMAT_MOD_QCOM_COMPRESSED) { |
| int i; |
| for (i = 0; i < ARRAY_SIZE(qcom_compressed_supported_formats); i++) { |
| if (format == qcom_compressed_supported_formats[i]) |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static const struct drm_plane_funcs dpu_plane_funcs = { |
| .update_plane = drm_atomic_helper_update_plane, |
| .disable_plane = drm_atomic_helper_disable_plane, |
| .destroy = dpu_plane_destroy, |
| .reset = dpu_plane_reset, |
| .atomic_duplicate_state = dpu_plane_duplicate_state, |
| .atomic_destroy_state = dpu_plane_destroy_state, |
| .late_register = dpu_plane_late_register, |
| .early_unregister = dpu_plane_early_unregister, |
| .format_mod_supported = dpu_plane_format_mod_supported, |
| }; |
| |
| static const struct drm_plane_helper_funcs dpu_plane_helper_funcs = { |
| .prepare_fb = dpu_plane_prepare_fb, |
| .cleanup_fb = dpu_plane_cleanup_fb, |
| .atomic_check = dpu_plane_atomic_check, |
| .atomic_update = dpu_plane_atomic_update, |
| }; |
| |
| enum dpu_sspp dpu_plane_pipe(struct drm_plane *plane) |
| { |
| return plane ? to_dpu_plane(plane)->pipe : SSPP_NONE; |
| } |
| |
| bool is_dpu_plane_virtual(struct drm_plane *plane) |
| { |
| return plane ? to_dpu_plane(plane)->is_virtual : false; |
| } |
| |
| /* initialize plane */ |
| struct drm_plane *dpu_plane_init(struct drm_device *dev, |
| uint32_t pipe, enum drm_plane_type type, |
| unsigned long possible_crtcs, u32 master_plane_id) |
| { |
| struct drm_plane *plane = NULL, *master_plane = NULL; |
| const uint32_t *format_list; |
| struct dpu_plane *pdpu; |
| struct msm_drm_private *priv = dev->dev_private; |
| struct dpu_kms *kms = to_dpu_kms(priv->kms); |
| int zpos_max = DPU_ZPOS_MAX; |
| uint32_t num_formats; |
| int ret = -EINVAL; |
| |
| /* create and zero local structure */ |
| pdpu = kzalloc(sizeof(*pdpu), GFP_KERNEL); |
| if (!pdpu) { |
| DPU_ERROR("[%u]failed to allocate local plane struct\n", pipe); |
| ret = -ENOMEM; |
| return ERR_PTR(ret); |
| } |
| |
| /* cache local stuff for later */ |
| plane = &pdpu->base; |
| pdpu->pipe = pipe; |
| pdpu->is_virtual = (master_plane_id != 0); |
| INIT_LIST_HEAD(&pdpu->mplane_list); |
| master_plane = drm_plane_find(dev, NULL, master_plane_id); |
| if (master_plane) { |
| struct dpu_plane *mpdpu = to_dpu_plane(master_plane); |
| |
| list_add_tail(&pdpu->mplane_list, &mpdpu->mplane_list); |
| } |
| |
| /* initialize underlying h/w driver */ |
| pdpu->pipe_hw = dpu_hw_sspp_init(pipe, kms->mmio, kms->catalog, |
| master_plane_id != 0); |
| if (IS_ERR(pdpu->pipe_hw)) { |
| DPU_ERROR("[%u]SSPP init failed\n", pipe); |
| ret = PTR_ERR(pdpu->pipe_hw); |
| goto clean_plane; |
| } else if (!pdpu->pipe_hw->cap || !pdpu->pipe_hw->cap->sblk) { |
| DPU_ERROR("[%u]SSPP init returned invalid cfg\n", pipe); |
| goto clean_sspp; |
| } |
| |
| /* cache features mask for later */ |
| pdpu->features = pdpu->pipe_hw->cap->features; |
| pdpu->pipe_sblk = pdpu->pipe_hw->cap->sblk; |
| if (!pdpu->pipe_sblk) { |
| DPU_ERROR("[%u]invalid sblk\n", pipe); |
| goto clean_sspp; |
| } |
| |
| if (pdpu->is_virtual) { |
| format_list = pdpu->pipe_sblk->virt_format_list; |
| num_formats = pdpu->pipe_sblk->virt_num_formats; |
| } |
| else { |
| format_list = pdpu->pipe_sblk->format_list; |
| num_formats = pdpu->pipe_sblk->num_formats; |
| } |
| |
| ret = drm_universal_plane_init(dev, plane, 0xff, &dpu_plane_funcs, |
| format_list, num_formats, |
| supported_format_modifiers, type, NULL); |
| if (ret) |
| goto clean_sspp; |
| |
| pdpu->catalog = kms->catalog; |
| |
| if (kms->catalog->mixer_count && |
| kms->catalog->mixer[0].sblk->maxblendstages) { |
| zpos_max = kms->catalog->mixer[0].sblk->maxblendstages - 1; |
| if (zpos_max > DPU_STAGE_MAX - DPU_STAGE_0 - 1) |
| zpos_max = DPU_STAGE_MAX - DPU_STAGE_0 - 1; |
| } |
| |
| ret = drm_plane_create_zpos_property(plane, 0, 0, zpos_max); |
| if (ret) |
| DPU_ERROR("failed to install zpos property, rc = %d\n", ret); |
| |
| drm_plane_create_alpha_property(plane); |
| drm_plane_create_blend_mode_property(plane, |
| BIT(DRM_MODE_BLEND_PIXEL_NONE) | |
| BIT(DRM_MODE_BLEND_PREMULTI) | |
| BIT(DRM_MODE_BLEND_COVERAGE)); |
| |
| drm_plane_create_rotation_property(plane, |
| DRM_MODE_ROTATE_0, |
| DRM_MODE_ROTATE_0 | |
| DRM_MODE_ROTATE_180 | |
| DRM_MODE_REFLECT_X | |
| DRM_MODE_REFLECT_Y); |
| |
| drm_plane_enable_fb_damage_clips(plane); |
| |
| /* success! finalize initialization */ |
| drm_plane_helper_add(plane, &dpu_plane_helper_funcs); |
| |
| /* save user friendly pipe name for later */ |
| snprintf(pdpu->pipe_name, DPU_NAME_SIZE, "plane%u", plane->base.id); |
| |
| mutex_init(&pdpu->lock); |
| |
| DPU_DEBUG("%s created for pipe:%u id:%u virtual:%u\n", pdpu->pipe_name, |
| pipe, plane->base.id, master_plane_id); |
| return plane; |
| |
| clean_sspp: |
| if (pdpu && pdpu->pipe_hw) |
| dpu_hw_sspp_destroy(pdpu->pipe_hw); |
| clean_plane: |
| kfree(pdpu); |
| return ERR_PTR(ret); |
| } |