| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * tc358743 - Toshiba HDMI to CSI-2 bridge |
| * |
| * Copyright 2015 Cisco Systems, Inc. and/or its affiliates. All rights |
| * reserved. |
| */ |
| |
| /* |
| * References (c = chapter, p = page): |
| * REF_01 - Toshiba, TC358743XBG (H2C), Functional Specification, Rev 0.60 |
| * REF_02 - Toshiba, TC358743XBG_HDMI-CSI_Tv11p_nm.xls |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/interrupt.h> |
| #include <linux/timer.h> |
| #include <linux/of_graph.h> |
| #include <linux/videodev2.h> |
| #include <linux/workqueue.h> |
| #include <linux/v4l2-dv-timings.h> |
| #include <linux/hdmi.h> |
| #include <media/cec.h> |
| #include <media/v4l2-dv-timings.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-event.h> |
| #include <media/v4l2-fwnode.h> |
| #include <media/i2c/tc358743.h> |
| |
| #include "tc358743_regs.h" |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "debug level (0-3)"); |
| |
| MODULE_DESCRIPTION("Toshiba TC358743 HDMI to CSI-2 bridge driver"); |
| MODULE_AUTHOR("Ramakrishnan Muthukrishnan <ram@rkrishnan.org>"); |
| MODULE_AUTHOR("Mikhail Khelik <mkhelik@cisco.com>"); |
| MODULE_AUTHOR("Mats Randgaard <matrandg@cisco.com>"); |
| MODULE_LICENSE("GPL"); |
| |
| #define EDID_NUM_BLOCKS_MAX 8 |
| #define EDID_BLOCK_SIZE 128 |
| |
| #define I2C_MAX_XFER_SIZE (EDID_BLOCK_SIZE + 2) |
| |
| #define POLL_INTERVAL_CEC_MS 10 |
| #define POLL_INTERVAL_MS 1000 |
| |
| static const struct v4l2_dv_timings_cap tc358743_timings_cap = { |
| .type = V4L2_DV_BT_656_1120, |
| /* keep this initialization for compatibility with GCC < 4.4.6 */ |
| .reserved = { 0 }, |
| /* Pixel clock from REF_01 p. 20. Min/max height/width are unknown */ |
| V4L2_INIT_BT_TIMINGS(640, 1920, 350, 1200, 13000000, 165000000, |
| V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | |
| V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT, |
| V4L2_DV_BT_CAP_PROGRESSIVE | |
| V4L2_DV_BT_CAP_REDUCED_BLANKING | |
| V4L2_DV_BT_CAP_CUSTOM) |
| }; |
| |
| struct tc358743_state { |
| struct tc358743_platform_data pdata; |
| struct v4l2_fwnode_bus_mipi_csi2 bus; |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_ctrl_handler hdl; |
| struct i2c_client *i2c_client; |
| /* CONFCTL is modified in ops and tc358743_hdmi_sys_int_handler */ |
| struct mutex confctl_mutex; |
| |
| /* controls */ |
| struct v4l2_ctrl *detect_tx_5v_ctrl; |
| struct v4l2_ctrl *audio_sampling_rate_ctrl; |
| struct v4l2_ctrl *audio_present_ctrl; |
| |
| struct delayed_work delayed_work_enable_hotplug; |
| |
| struct timer_list timer; |
| struct work_struct work_i2c_poll; |
| |
| /* edid */ |
| u8 edid_blocks_written; |
| |
| struct v4l2_dv_timings timings; |
| u32 mbus_fmt_code; |
| u8 csi_lanes_in_use; |
| |
| struct gpio_desc *reset_gpio; |
| |
| struct cec_adapter *cec_adap; |
| }; |
| |
| static void tc358743_enable_interrupts(struct v4l2_subdev *sd, |
| bool cable_connected); |
| static int tc358743_s_ctrl_detect_tx_5v(struct v4l2_subdev *sd); |
| |
| static inline struct tc358743_state *to_state(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct tc358743_state, sd); |
| } |
| |
| /* --------------- I2C --------------- */ |
| |
| static void i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) |
| { |
| struct tc358743_state *state = to_state(sd); |
| struct i2c_client *client = state->i2c_client; |
| int err; |
| u8 buf[2] = { reg >> 8, reg & 0xff }; |
| struct i2c_msg msgs[] = { |
| { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 2, |
| .buf = buf, |
| }, |
| { |
| .addr = client->addr, |
| .flags = I2C_M_RD, |
| .len = n, |
| .buf = values, |
| }, |
| }; |
| |
| err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| if (err != ARRAY_SIZE(msgs)) { |
| v4l2_err(sd, "%s: reading register 0x%x from 0x%x failed\n", |
| __func__, reg, client->addr); |
| } |
| } |
| |
| static void i2c_wr(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) |
| { |
| struct tc358743_state *state = to_state(sd); |
| struct i2c_client *client = state->i2c_client; |
| int err, i; |
| struct i2c_msg msg; |
| u8 data[I2C_MAX_XFER_SIZE]; |
| |
| if ((2 + n) > I2C_MAX_XFER_SIZE) { |
| n = I2C_MAX_XFER_SIZE - 2; |
| v4l2_warn(sd, "i2c wr reg=%04x: len=%d is too big!\n", |
| reg, 2 + n); |
| } |
| |
| msg.addr = client->addr; |
| msg.buf = data; |
| msg.len = 2 + n; |
| msg.flags = 0; |
| |
| data[0] = reg >> 8; |
| data[1] = reg & 0xff; |
| |
| for (i = 0; i < n; i++) |
| data[2 + i] = values[i]; |
| |
| err = i2c_transfer(client->adapter, &msg, 1); |
| if (err != 1) { |
| v4l2_err(sd, "%s: writing register 0x%x from 0x%x failed\n", |
| __func__, reg, client->addr); |
| return; |
| } |
| |
| if (debug < 3) |
| return; |
| |
| switch (n) { |
| case 1: |
| v4l2_info(sd, "I2C write 0x%04x = 0x%02x", |
| reg, data[2]); |
| break; |
| case 2: |
| v4l2_info(sd, "I2C write 0x%04x = 0x%02x%02x", |
| reg, data[3], data[2]); |
| break; |
| case 4: |
| v4l2_info(sd, "I2C write 0x%04x = 0x%02x%02x%02x%02x", |
| reg, data[5], data[4], data[3], data[2]); |
| break; |
| default: |
| v4l2_info(sd, "I2C write %d bytes from address 0x%04x\n", |
| n, reg); |
| } |
| } |
| |
| static noinline u32 i2c_rdreg(struct v4l2_subdev *sd, u16 reg, u32 n) |
| { |
| __le32 val = 0; |
| |
| i2c_rd(sd, reg, (u8 __force *)&val, n); |
| |
| return le32_to_cpu(val); |
| } |
| |
| static noinline void i2c_wrreg(struct v4l2_subdev *sd, u16 reg, u32 val, u32 n) |
| { |
| __le32 raw = cpu_to_le32(val); |
| |
| i2c_wr(sd, reg, (u8 __force *)&raw, n); |
| } |
| |
| static u8 i2c_rd8(struct v4l2_subdev *sd, u16 reg) |
| { |
| return i2c_rdreg(sd, reg, 1); |
| } |
| |
| static void i2c_wr8(struct v4l2_subdev *sd, u16 reg, u8 val) |
| { |
| i2c_wrreg(sd, reg, val, 1); |
| } |
| |
| static void i2c_wr8_and_or(struct v4l2_subdev *sd, u16 reg, |
| u8 mask, u8 val) |
| { |
| i2c_wrreg(sd, reg, (i2c_rdreg(sd, reg, 1) & mask) | val, 1); |
| } |
| |
| static u16 i2c_rd16(struct v4l2_subdev *sd, u16 reg) |
| { |
| return i2c_rdreg(sd, reg, 2); |
| } |
| |
| static void i2c_wr16(struct v4l2_subdev *sd, u16 reg, u16 val) |
| { |
| i2c_wrreg(sd, reg, val, 2); |
| } |
| |
| static void i2c_wr16_and_or(struct v4l2_subdev *sd, u16 reg, u16 mask, u16 val) |
| { |
| i2c_wrreg(sd, reg, (i2c_rdreg(sd, reg, 2) & mask) | val, 2); |
| } |
| |
| static u32 i2c_rd32(struct v4l2_subdev *sd, u16 reg) |
| { |
| return i2c_rdreg(sd, reg, 4); |
| } |
| |
| static void i2c_wr32(struct v4l2_subdev *sd, u16 reg, u32 val) |
| { |
| i2c_wrreg(sd, reg, val, 4); |
| } |
| |
| /* --------------- STATUS --------------- */ |
| |
| static inline bool is_hdmi(struct v4l2_subdev *sd) |
| { |
| return i2c_rd8(sd, SYS_STATUS) & MASK_S_HDMI; |
| } |
| |
| static inline bool tx_5v_power_present(struct v4l2_subdev *sd) |
| { |
| return i2c_rd8(sd, SYS_STATUS) & MASK_S_DDC5V; |
| } |
| |
| static inline bool no_signal(struct v4l2_subdev *sd) |
| { |
| return !(i2c_rd8(sd, SYS_STATUS) & MASK_S_TMDS); |
| } |
| |
| static inline bool no_sync(struct v4l2_subdev *sd) |
| { |
| return !(i2c_rd8(sd, SYS_STATUS) & MASK_S_SYNC); |
| } |
| |
| static inline bool audio_present(struct v4l2_subdev *sd) |
| { |
| return i2c_rd8(sd, AU_STATUS0) & MASK_S_A_SAMPLE; |
| } |
| |
| static int get_audio_sampling_rate(struct v4l2_subdev *sd) |
| { |
| static const int code_to_rate[] = { |
| 44100, 0, 48000, 32000, 22050, 384000, 24000, 352800, |
| 88200, 768000, 96000, 705600, 176400, 0, 192000, 0 |
| }; |
| |
| /* Register FS_SET is not cleared when the cable is disconnected */ |
| if (no_signal(sd)) |
| return 0; |
| |
| return code_to_rate[i2c_rd8(sd, FS_SET) & MASK_FS]; |
| } |
| |
| /* --------------- TIMINGS --------------- */ |
| |
| static inline unsigned fps(const struct v4l2_bt_timings *t) |
| { |
| if (!V4L2_DV_BT_FRAME_HEIGHT(t) || !V4L2_DV_BT_FRAME_WIDTH(t)) |
| return 0; |
| |
| return DIV_ROUND_CLOSEST((unsigned)t->pixelclock, |
| V4L2_DV_BT_FRAME_HEIGHT(t) * V4L2_DV_BT_FRAME_WIDTH(t)); |
| } |
| |
| static int tc358743_get_detected_timings(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings *timings) |
| { |
| struct v4l2_bt_timings *bt = &timings->bt; |
| unsigned width, height, frame_width, frame_height, frame_interval, fps; |
| |
| memset(timings, 0, sizeof(struct v4l2_dv_timings)); |
| |
| if (no_signal(sd)) { |
| v4l2_dbg(1, debug, sd, "%s: no valid signal\n", __func__); |
| return -ENOLINK; |
| } |
| if (no_sync(sd)) { |
| v4l2_dbg(1, debug, sd, "%s: no sync on signal\n", __func__); |
| return -ENOLCK; |
| } |
| |
| timings->type = V4L2_DV_BT_656_1120; |
| bt->interlaced = i2c_rd8(sd, VI_STATUS1) & MASK_S_V_INTERLACE ? |
| V4L2_DV_INTERLACED : V4L2_DV_PROGRESSIVE; |
| |
| width = ((i2c_rd8(sd, DE_WIDTH_H_HI) & 0x1f) << 8) + |
| i2c_rd8(sd, DE_WIDTH_H_LO); |
| height = ((i2c_rd8(sd, DE_WIDTH_V_HI) & 0x1f) << 8) + |
| i2c_rd8(sd, DE_WIDTH_V_LO); |
| frame_width = ((i2c_rd8(sd, H_SIZE_HI) & 0x1f) << 8) + |
| i2c_rd8(sd, H_SIZE_LO); |
| frame_height = (((i2c_rd8(sd, V_SIZE_HI) & 0x3f) << 8) + |
| i2c_rd8(sd, V_SIZE_LO)) / 2; |
| /* frame interval in milliseconds * 10 |
| * Require SYS_FREQ0 and SYS_FREQ1 are precisely set */ |
| frame_interval = ((i2c_rd8(sd, FV_CNT_HI) & 0x3) << 8) + |
| i2c_rd8(sd, FV_CNT_LO); |
| fps = (frame_interval > 0) ? |
| DIV_ROUND_CLOSEST(10000, frame_interval) : 0; |
| |
| bt->width = width; |
| bt->height = height; |
| bt->vsync = frame_height - height; |
| bt->hsync = frame_width - width; |
| bt->pixelclock = frame_width * frame_height * fps; |
| if (bt->interlaced == V4L2_DV_INTERLACED) { |
| bt->height *= 2; |
| bt->il_vsync = bt->vsync + 1; |
| bt->pixelclock /= 2; |
| } |
| |
| return 0; |
| } |
| |
| /* --------------- HOTPLUG / HDCP / EDID --------------- */ |
| |
| static void tc358743_delayed_work_enable_hotplug(struct work_struct *work) |
| { |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct tc358743_state *state = container_of(dwork, |
| struct tc358743_state, delayed_work_enable_hotplug); |
| struct v4l2_subdev *sd = &state->sd; |
| |
| v4l2_dbg(2, debug, sd, "%s:\n", __func__); |
| |
| i2c_wr8_and_or(sd, HPD_CTL, ~MASK_HPD_OUT0, MASK_HPD_OUT0); |
| } |
| |
| static void tc358743_set_hdmi_hdcp(struct v4l2_subdev *sd, bool enable) |
| { |
| v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ? |
| "enable" : "disable"); |
| |
| if (enable) { |
| i2c_wr8_and_or(sd, HDCP_REG3, ~KEY_RD_CMD, KEY_RD_CMD); |
| |
| i2c_wr8_and_or(sd, HDCP_MODE, ~MASK_MANUAL_AUTHENTICATION, 0); |
| |
| i2c_wr8_and_or(sd, HDCP_REG1, 0xff, |
| MASK_AUTH_UNAUTH_SEL_16_FRAMES | |
| MASK_AUTH_UNAUTH_AUTO); |
| |
| i2c_wr8_and_or(sd, HDCP_REG2, ~MASK_AUTO_P3_RESET, |
| SET_AUTO_P3_RESET_FRAMES(0x0f)); |
| } else { |
| i2c_wr8_and_or(sd, HDCP_MODE, ~MASK_MANUAL_AUTHENTICATION, |
| MASK_MANUAL_AUTHENTICATION); |
| } |
| } |
| |
| static void tc358743_disable_edid(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| |
| v4l2_dbg(2, debug, sd, "%s:\n", __func__); |
| |
| cancel_delayed_work_sync(&state->delayed_work_enable_hotplug); |
| |
| /* DDC access to EDID is also disabled when hotplug is disabled. See |
| * register DDC_CTL */ |
| i2c_wr8_and_or(sd, HPD_CTL, ~MASK_HPD_OUT0, 0x0); |
| } |
| |
| static void tc358743_enable_edid(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| |
| if (state->edid_blocks_written == 0) { |
| v4l2_dbg(2, debug, sd, "%s: no EDID -> no hotplug\n", __func__); |
| tc358743_s_ctrl_detect_tx_5v(sd); |
| return; |
| } |
| |
| v4l2_dbg(2, debug, sd, "%s:\n", __func__); |
| |
| /* Enable hotplug after 100 ms. DDC access to EDID is also enabled when |
| * hotplug is enabled. See register DDC_CTL */ |
| schedule_delayed_work(&state->delayed_work_enable_hotplug, HZ / 10); |
| |
| tc358743_enable_interrupts(sd, true); |
| tc358743_s_ctrl_detect_tx_5v(sd); |
| } |
| |
| static void tc358743_erase_bksv(struct v4l2_subdev *sd) |
| { |
| int i; |
| |
| for (i = 0; i < 5; i++) |
| i2c_wr8(sd, BKSV + i, 0); |
| } |
| |
| /* --------------- AVI infoframe --------------- */ |
| |
| static void print_avi_infoframe(struct v4l2_subdev *sd) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct device *dev = &client->dev; |
| union hdmi_infoframe frame; |
| u8 buffer[HDMI_INFOFRAME_SIZE(AVI)]; |
| |
| if (!is_hdmi(sd)) { |
| v4l2_info(sd, "DVI-D signal - AVI infoframe not supported\n"); |
| return; |
| } |
| |
| i2c_rd(sd, PK_AVI_0HEAD, buffer, HDMI_INFOFRAME_SIZE(AVI)); |
| |
| if (hdmi_infoframe_unpack(&frame, buffer, sizeof(buffer)) < 0) { |
| v4l2_err(sd, "%s: unpack of AVI infoframe failed\n", __func__); |
| return; |
| } |
| |
| hdmi_infoframe_log(KERN_INFO, dev, &frame); |
| } |
| |
| /* --------------- CTRLS --------------- */ |
| |
| static int tc358743_s_ctrl_detect_tx_5v(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| |
| return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, |
| tx_5v_power_present(sd)); |
| } |
| |
| static int tc358743_s_ctrl_audio_sampling_rate(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| |
| return v4l2_ctrl_s_ctrl(state->audio_sampling_rate_ctrl, |
| get_audio_sampling_rate(sd)); |
| } |
| |
| static int tc358743_s_ctrl_audio_present(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| |
| return v4l2_ctrl_s_ctrl(state->audio_present_ctrl, |
| audio_present(sd)); |
| } |
| |
| static int tc358743_update_controls(struct v4l2_subdev *sd) |
| { |
| int ret = 0; |
| |
| ret |= tc358743_s_ctrl_detect_tx_5v(sd); |
| ret |= tc358743_s_ctrl_audio_sampling_rate(sd); |
| ret |= tc358743_s_ctrl_audio_present(sd); |
| |
| return ret; |
| } |
| |
| /* --------------- INIT --------------- */ |
| |
| static void tc358743_reset_phy(struct v4l2_subdev *sd) |
| { |
| v4l2_dbg(1, debug, sd, "%s:\n", __func__); |
| |
| i2c_wr8_and_or(sd, PHY_RST, ~MASK_RESET_CTRL, 0); |
| i2c_wr8_and_or(sd, PHY_RST, ~MASK_RESET_CTRL, MASK_RESET_CTRL); |
| } |
| |
| static void tc358743_reset(struct v4l2_subdev *sd, uint16_t mask) |
| { |
| u16 sysctl = i2c_rd16(sd, SYSCTL); |
| |
| i2c_wr16(sd, SYSCTL, sysctl | mask); |
| i2c_wr16(sd, SYSCTL, sysctl & ~mask); |
| } |
| |
| static inline void tc358743_sleep_mode(struct v4l2_subdev *sd, bool enable) |
| { |
| i2c_wr16_and_or(sd, SYSCTL, ~MASK_SLEEP, |
| enable ? MASK_SLEEP : 0); |
| } |
| |
| static inline void enable_stream(struct v4l2_subdev *sd, bool enable) |
| { |
| struct tc358743_state *state = to_state(sd); |
| |
| v4l2_dbg(3, debug, sd, "%s: %sable\n", |
| __func__, enable ? "en" : "dis"); |
| |
| if (enable) { |
| /* It is critical for CSI receiver to see lane transition |
| * LP11->HS. Set to non-continuous mode to enable clock lane |
| * LP11 state. */ |
| i2c_wr32(sd, TXOPTIONCNTRL, 0); |
| /* Set to continuous mode to trigger LP11->HS transition */ |
| i2c_wr32(sd, TXOPTIONCNTRL, MASK_CONTCLKMODE); |
| /* Unmute video */ |
| i2c_wr8(sd, VI_MUTE, MASK_AUTO_MUTE); |
| } else { |
| /* Mute video so that all data lanes go to LSP11 state. |
| * No data is output to CSI Tx block. */ |
| i2c_wr8(sd, VI_MUTE, MASK_AUTO_MUTE | MASK_VI_MUTE); |
| } |
| |
| mutex_lock(&state->confctl_mutex); |
| i2c_wr16_and_or(sd, CONFCTL, ~(MASK_VBUFEN | MASK_ABUFEN), |
| enable ? (MASK_VBUFEN | MASK_ABUFEN) : 0x0); |
| mutex_unlock(&state->confctl_mutex); |
| } |
| |
| static void tc358743_set_pll(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| struct tc358743_platform_data *pdata = &state->pdata; |
| u16 pllctl0 = i2c_rd16(sd, PLLCTL0); |
| u16 pllctl1 = i2c_rd16(sd, PLLCTL1); |
| u16 pllctl0_new = SET_PLL_PRD(pdata->pll_prd) | |
| SET_PLL_FBD(pdata->pll_fbd); |
| u32 hsck = (pdata->refclk_hz / pdata->pll_prd) * pdata->pll_fbd; |
| |
| v4l2_dbg(2, debug, sd, "%s:\n", __func__); |
| |
| /* Only rewrite when needed (new value or disabled), since rewriting |
| * triggers another format change event. */ |
| if ((pllctl0 != pllctl0_new) || ((pllctl1 & MASK_PLL_EN) == 0)) { |
| u16 pll_frs; |
| |
| if (hsck > 500000000) |
| pll_frs = 0x0; |
| else if (hsck > 250000000) |
| pll_frs = 0x1; |
| else if (hsck > 125000000) |
| pll_frs = 0x2; |
| else |
| pll_frs = 0x3; |
| |
| v4l2_dbg(1, debug, sd, "%s: updating PLL clock\n", __func__); |
| tc358743_sleep_mode(sd, true); |
| i2c_wr16(sd, PLLCTL0, pllctl0_new); |
| i2c_wr16_and_or(sd, PLLCTL1, |
| ~(MASK_PLL_FRS | MASK_RESETB | MASK_PLL_EN), |
| (SET_PLL_FRS(pll_frs) | MASK_RESETB | |
| MASK_PLL_EN)); |
| udelay(10); /* REF_02, Sheet "Source HDMI" */ |
| i2c_wr16_and_or(sd, PLLCTL1, ~MASK_CKEN, MASK_CKEN); |
| tc358743_sleep_mode(sd, false); |
| } |
| } |
| |
| static void tc358743_set_ref_clk(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| struct tc358743_platform_data *pdata = &state->pdata; |
| u32 sys_freq; |
| u32 lockdet_ref; |
| u32 cec_freq; |
| u16 fh_min; |
| u16 fh_max; |
| |
| BUG_ON(!(pdata->refclk_hz == 26000000 || |
| pdata->refclk_hz == 27000000 || |
| pdata->refclk_hz == 42000000)); |
| |
| sys_freq = pdata->refclk_hz / 10000; |
| i2c_wr8(sd, SYS_FREQ0, sys_freq & 0x00ff); |
| i2c_wr8(sd, SYS_FREQ1, (sys_freq & 0xff00) >> 8); |
| |
| i2c_wr8_and_or(sd, PHY_CTL0, ~MASK_PHY_SYSCLK_IND, |
| (pdata->refclk_hz == 42000000) ? |
| MASK_PHY_SYSCLK_IND : 0x0); |
| |
| fh_min = pdata->refclk_hz / 100000; |
| i2c_wr8(sd, FH_MIN0, fh_min & 0x00ff); |
| i2c_wr8(sd, FH_MIN1, (fh_min & 0xff00) >> 8); |
| |
| fh_max = (fh_min * 66) / 10; |
| i2c_wr8(sd, FH_MAX0, fh_max & 0x00ff); |
| i2c_wr8(sd, FH_MAX1, (fh_max & 0xff00) >> 8); |
| |
| lockdet_ref = pdata->refclk_hz / 100; |
| i2c_wr8(sd, LOCKDET_REF0, lockdet_ref & 0x0000ff); |
| i2c_wr8(sd, LOCKDET_REF1, (lockdet_ref & 0x00ff00) >> 8); |
| i2c_wr8(sd, LOCKDET_REF2, (lockdet_ref & 0x0f0000) >> 16); |
| |
| i2c_wr8_and_or(sd, NCO_F0_MOD, ~MASK_NCO_F0_MOD, |
| (pdata->refclk_hz == 27000000) ? |
| MASK_NCO_F0_MOD_27MHZ : 0x0); |
| |
| /* |
| * Trial and error suggests that the default register value |
| * of 656 is for a 42 MHz reference clock. Use that to derive |
| * a new value based on the actual reference clock. |
| */ |
| cec_freq = (656 * sys_freq) / 4200; |
| i2c_wr16(sd, CECHCLK, cec_freq); |
| i2c_wr16(sd, CECLCLK, cec_freq); |
| } |
| |
| static void tc358743_set_csi_color_space(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| |
| switch (state->mbus_fmt_code) { |
| case MEDIA_BUS_FMT_UYVY8_1X16: |
| v4l2_dbg(2, debug, sd, "%s: YCbCr 422 16-bit\n", __func__); |
| i2c_wr8_and_or(sd, VOUT_SET2, |
| ~(MASK_SEL422 | MASK_VOUT_422FIL_100) & 0xff, |
| MASK_SEL422 | MASK_VOUT_422FIL_100); |
| i2c_wr8_and_or(sd, VI_REP, ~MASK_VOUT_COLOR_SEL & 0xff, |
| MASK_VOUT_COLOR_601_YCBCR_LIMITED); |
| mutex_lock(&state->confctl_mutex); |
| i2c_wr16_and_or(sd, CONFCTL, ~MASK_YCBCRFMT, |
| MASK_YCBCRFMT_422_8_BIT); |
| mutex_unlock(&state->confctl_mutex); |
| break; |
| case MEDIA_BUS_FMT_RGB888_1X24: |
| v4l2_dbg(2, debug, sd, "%s: RGB 888 24-bit\n", __func__); |
| i2c_wr8_and_or(sd, VOUT_SET2, |
| ~(MASK_SEL422 | MASK_VOUT_422FIL_100) & 0xff, |
| 0x00); |
| i2c_wr8_and_or(sd, VI_REP, ~MASK_VOUT_COLOR_SEL & 0xff, |
| MASK_VOUT_COLOR_RGB_FULL); |
| mutex_lock(&state->confctl_mutex); |
| i2c_wr16_and_or(sd, CONFCTL, ~MASK_YCBCRFMT, 0); |
| mutex_unlock(&state->confctl_mutex); |
| break; |
| default: |
| v4l2_dbg(2, debug, sd, "%s: Unsupported format code 0x%x\n", |
| __func__, state->mbus_fmt_code); |
| } |
| } |
| |
| static unsigned tc358743_num_csi_lanes_needed(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| struct v4l2_bt_timings *bt = &state->timings.bt; |
| struct tc358743_platform_data *pdata = &state->pdata; |
| u32 bits_pr_pixel = |
| (state->mbus_fmt_code == MEDIA_BUS_FMT_UYVY8_1X16) ? 16 : 24; |
| u32 bps = bt->width * bt->height * fps(bt) * bits_pr_pixel; |
| u32 bps_pr_lane = (pdata->refclk_hz / pdata->pll_prd) * pdata->pll_fbd; |
| |
| return DIV_ROUND_UP(bps, bps_pr_lane); |
| } |
| |
| static void tc358743_set_csi(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| struct tc358743_platform_data *pdata = &state->pdata; |
| unsigned lanes = tc358743_num_csi_lanes_needed(sd); |
| |
| v4l2_dbg(3, debug, sd, "%s:\n", __func__); |
| |
| state->csi_lanes_in_use = lanes; |
| |
| tc358743_reset(sd, MASK_CTXRST); |
| |
| if (lanes < 1) |
| i2c_wr32(sd, CLW_CNTRL, MASK_CLW_LANEDISABLE); |
| if (lanes < 1) |
| i2c_wr32(sd, D0W_CNTRL, MASK_D0W_LANEDISABLE); |
| if (lanes < 2) |
| i2c_wr32(sd, D1W_CNTRL, MASK_D1W_LANEDISABLE); |
| if (lanes < 3) |
| i2c_wr32(sd, D2W_CNTRL, MASK_D2W_LANEDISABLE); |
| if (lanes < 4) |
| i2c_wr32(sd, D3W_CNTRL, MASK_D3W_LANEDISABLE); |
| |
| i2c_wr32(sd, LINEINITCNT, pdata->lineinitcnt); |
| i2c_wr32(sd, LPTXTIMECNT, pdata->lptxtimecnt); |
| i2c_wr32(sd, TCLK_HEADERCNT, pdata->tclk_headercnt); |
| i2c_wr32(sd, TCLK_TRAILCNT, pdata->tclk_trailcnt); |
| i2c_wr32(sd, THS_HEADERCNT, pdata->ths_headercnt); |
| i2c_wr32(sd, TWAKEUP, pdata->twakeup); |
| i2c_wr32(sd, TCLK_POSTCNT, pdata->tclk_postcnt); |
| i2c_wr32(sd, THS_TRAILCNT, pdata->ths_trailcnt); |
| i2c_wr32(sd, HSTXVREGCNT, pdata->hstxvregcnt); |
| |
| i2c_wr32(sd, HSTXVREGEN, |
| ((lanes > 0) ? MASK_CLM_HSTXVREGEN : 0x0) | |
| ((lanes > 0) ? MASK_D0M_HSTXVREGEN : 0x0) | |
| ((lanes > 1) ? MASK_D1M_HSTXVREGEN : 0x0) | |
| ((lanes > 2) ? MASK_D2M_HSTXVREGEN : 0x0) | |
| ((lanes > 3) ? MASK_D3M_HSTXVREGEN : 0x0)); |
| |
| i2c_wr32(sd, TXOPTIONCNTRL, (state->bus.flags & |
| V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) ? MASK_CONTCLKMODE : 0); |
| i2c_wr32(sd, STARTCNTRL, MASK_START); |
| i2c_wr32(sd, CSI_START, MASK_STRT); |
| |
| i2c_wr32(sd, CSI_CONFW, MASK_MODE_SET | |
| MASK_ADDRESS_CSI_CONTROL | |
| MASK_CSI_MODE | |
| MASK_TXHSMD | |
| ((lanes == 4) ? MASK_NOL_4 : |
| (lanes == 3) ? MASK_NOL_3 : |
| (lanes == 2) ? MASK_NOL_2 : MASK_NOL_1)); |
| |
| i2c_wr32(sd, CSI_CONFW, MASK_MODE_SET | |
| MASK_ADDRESS_CSI_ERR_INTENA | MASK_TXBRK | MASK_QUNK | |
| MASK_WCER | MASK_INER); |
| |
| i2c_wr32(sd, CSI_CONFW, MASK_MODE_CLEAR | |
| MASK_ADDRESS_CSI_ERR_HALT | MASK_TXBRK | MASK_QUNK); |
| |
| i2c_wr32(sd, CSI_CONFW, MASK_MODE_SET | |
| MASK_ADDRESS_CSI_INT_ENA | MASK_INTER); |
| } |
| |
| static void tc358743_set_hdmi_phy(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| struct tc358743_platform_data *pdata = &state->pdata; |
| |
| /* Default settings from REF_02, sheet "Source HDMI" |
| * and custom settings as platform data */ |
| i2c_wr8_and_or(sd, PHY_EN, ~MASK_ENABLE_PHY, 0x0); |
| i2c_wr8(sd, PHY_CTL1, SET_PHY_AUTO_RST1_US(1600) | |
| SET_FREQ_RANGE_MODE_CYCLES(1)); |
| i2c_wr8_and_or(sd, PHY_CTL2, ~MASK_PHY_AUTO_RSTn, |
| (pdata->hdmi_phy_auto_reset_tmds_detected ? |
| MASK_PHY_AUTO_RST2 : 0) | |
| (pdata->hdmi_phy_auto_reset_tmds_in_range ? |
| MASK_PHY_AUTO_RST3 : 0) | |
| (pdata->hdmi_phy_auto_reset_tmds_valid ? |
| MASK_PHY_AUTO_RST4 : 0)); |
| i2c_wr8(sd, PHY_BIAS, 0x40); |
| i2c_wr8(sd, PHY_CSQ, SET_CSQ_CNT_LEVEL(0x0a)); |
| i2c_wr8(sd, AVM_CTL, 45); |
| i2c_wr8_and_or(sd, HDMI_DET, ~MASK_HDMI_DET_V, |
| pdata->hdmi_detection_delay << 4); |
| i2c_wr8_and_or(sd, HV_RST, ~(MASK_H_PI_RST | MASK_V_PI_RST), |
| (pdata->hdmi_phy_auto_reset_hsync_out_of_range ? |
| MASK_H_PI_RST : 0) | |
| (pdata->hdmi_phy_auto_reset_vsync_out_of_range ? |
| MASK_V_PI_RST : 0)); |
| i2c_wr8_and_or(sd, PHY_EN, ~MASK_ENABLE_PHY, MASK_ENABLE_PHY); |
| } |
| |
| static void tc358743_set_hdmi_audio(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| |
| /* Default settings from REF_02, sheet "Source HDMI" */ |
| i2c_wr8(sd, FORCE_MUTE, 0x00); |
| i2c_wr8(sd, AUTO_CMD0, MASK_AUTO_MUTE7 | MASK_AUTO_MUTE6 | |
| MASK_AUTO_MUTE5 | MASK_AUTO_MUTE4 | |
| MASK_AUTO_MUTE1 | MASK_AUTO_MUTE0); |
| i2c_wr8(sd, AUTO_CMD1, MASK_AUTO_MUTE9); |
| i2c_wr8(sd, AUTO_CMD2, MASK_AUTO_PLAY3 | MASK_AUTO_PLAY2); |
| i2c_wr8(sd, BUFINIT_START, SET_BUFINIT_START_MS(500)); |
| i2c_wr8(sd, FS_MUTE, 0x00); |
| i2c_wr8(sd, FS_IMODE, MASK_NLPCM_SMODE | MASK_FS_SMODE); |
| i2c_wr8(sd, ACR_MODE, MASK_CTS_MODE); |
| i2c_wr8(sd, ACR_MDF0, MASK_ACR_L2MDF_1976_PPM | MASK_ACR_L1MDF_976_PPM); |
| i2c_wr8(sd, ACR_MDF1, MASK_ACR_L3MDF_3906_PPM); |
| i2c_wr8(sd, SDO_MODE1, MASK_SDO_FMT_I2S); |
| i2c_wr8(sd, DIV_MODE, SET_DIV_DLY_MS(100)); |
| |
| mutex_lock(&state->confctl_mutex); |
| i2c_wr16_and_or(sd, CONFCTL, 0xffff, MASK_AUDCHNUM_2 | |
| MASK_AUDOUTSEL_I2S | MASK_AUTOINDEX); |
| mutex_unlock(&state->confctl_mutex); |
| } |
| |
| static void tc358743_set_hdmi_info_frame_mode(struct v4l2_subdev *sd) |
| { |
| /* Default settings from REF_02, sheet "Source HDMI" */ |
| i2c_wr8(sd, PK_INT_MODE, MASK_ISRC2_INT_MODE | MASK_ISRC_INT_MODE | |
| MASK_ACP_INT_MODE | MASK_VS_INT_MODE | |
| MASK_SPD_INT_MODE | MASK_MS_INT_MODE | |
| MASK_AUD_INT_MODE | MASK_AVI_INT_MODE); |
| i2c_wr8(sd, NO_PKT_LIMIT, 0x2c); |
| i2c_wr8(sd, NO_PKT_CLR, 0x53); |
| i2c_wr8(sd, ERR_PK_LIMIT, 0x01); |
| i2c_wr8(sd, NO_PKT_LIMIT2, 0x30); |
| i2c_wr8(sd, NO_GDB_LIMIT, 0x10); |
| } |
| |
| static void tc358743_initial_setup(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| struct tc358743_platform_data *pdata = &state->pdata; |
| |
| /* |
| * IR is not supported by this driver. |
| * CEC is only enabled if needed. |
| */ |
| i2c_wr16_and_or(sd, SYSCTL, ~(MASK_IRRST | MASK_CECRST), |
| (MASK_IRRST | MASK_CECRST)); |
| |
| tc358743_reset(sd, MASK_CTXRST | MASK_HDMIRST); |
| #ifdef CONFIG_VIDEO_TC358743_CEC |
| tc358743_reset(sd, MASK_CECRST); |
| #endif |
| tc358743_sleep_mode(sd, false); |
| |
| i2c_wr16(sd, FIFOCTL, pdata->fifo_level); |
| |
| tc358743_set_ref_clk(sd); |
| |
| i2c_wr8_and_or(sd, DDC_CTL, ~MASK_DDC5V_MODE, |
| pdata->ddc5v_delay & MASK_DDC5V_MODE); |
| i2c_wr8_and_or(sd, EDID_MODE, ~MASK_EDID_MODE, MASK_EDID_MODE_E_DDC); |
| |
| tc358743_set_hdmi_phy(sd); |
| tc358743_set_hdmi_hdcp(sd, pdata->enable_hdcp); |
| tc358743_set_hdmi_audio(sd); |
| tc358743_set_hdmi_info_frame_mode(sd); |
| |
| /* All CE and IT formats are detected as RGB full range in DVI mode */ |
| i2c_wr8_and_or(sd, VI_MODE, ~MASK_RGB_DVI, 0); |
| |
| i2c_wr8_and_or(sd, VOUT_SET2, ~MASK_VOUTCOLORMODE, |
| MASK_VOUTCOLORMODE_AUTO); |
| i2c_wr8(sd, VOUT_SET3, MASK_VOUT_EXTCNT); |
| } |
| |
| /* --------------- CEC --------------- */ |
| |
| #ifdef CONFIG_VIDEO_TC358743_CEC |
| static int tc358743_cec_adap_enable(struct cec_adapter *adap, bool enable) |
| { |
| struct tc358743_state *state = adap->priv; |
| struct v4l2_subdev *sd = &state->sd; |
| |
| i2c_wr32(sd, CECIMSK, enable ? MASK_CECTIM | MASK_CECRIM : 0); |
| i2c_wr32(sd, CECICLR, MASK_CECTICLR | MASK_CECRICLR); |
| i2c_wr32(sd, CECEN, enable); |
| if (enable) |
| i2c_wr32(sd, CECREN, MASK_CECREN); |
| return 0; |
| } |
| |
| static int tc358743_cec_adap_monitor_all_enable(struct cec_adapter *adap, |
| bool enable) |
| { |
| struct tc358743_state *state = adap->priv; |
| struct v4l2_subdev *sd = &state->sd; |
| u32 reg; |
| |
| reg = i2c_rd32(sd, CECRCTL1); |
| if (enable) |
| reg |= MASK_CECOTH; |
| else |
| reg &= ~MASK_CECOTH; |
| i2c_wr32(sd, CECRCTL1, reg); |
| return 0; |
| } |
| |
| static int tc358743_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr) |
| { |
| struct tc358743_state *state = adap->priv; |
| struct v4l2_subdev *sd = &state->sd; |
| unsigned int la = 0; |
| |
| if (log_addr != CEC_LOG_ADDR_INVALID) { |
| la = i2c_rd32(sd, CECADD); |
| la |= 1 << log_addr; |
| } |
| i2c_wr32(sd, CECADD, la); |
| return 0; |
| } |
| |
| static int tc358743_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, |
| u32 signal_free_time, struct cec_msg *msg) |
| { |
| struct tc358743_state *state = adap->priv; |
| struct v4l2_subdev *sd = &state->sd; |
| unsigned int i; |
| |
| i2c_wr32(sd, CECTCTL, |
| (cec_msg_is_broadcast(msg) ? MASK_CECBRD : 0) | |
| (signal_free_time - 1)); |
| for (i = 0; i < msg->len; i++) |
| i2c_wr32(sd, CECTBUF1 + i * 4, |
| msg->msg[i] | ((i == msg->len - 1) ? MASK_CECTEOM : 0)); |
| i2c_wr32(sd, CECTEN, MASK_CECTEN); |
| return 0; |
| } |
| |
| static const struct cec_adap_ops tc358743_cec_adap_ops = { |
| .adap_enable = tc358743_cec_adap_enable, |
| .adap_log_addr = tc358743_cec_adap_log_addr, |
| .adap_transmit = tc358743_cec_adap_transmit, |
| .adap_monitor_all_enable = tc358743_cec_adap_monitor_all_enable, |
| }; |
| |
| static void tc358743_cec_handler(struct v4l2_subdev *sd, u16 intstatus, |
| bool *handled) |
| { |
| struct tc358743_state *state = to_state(sd); |
| unsigned int cec_rxint, cec_txint; |
| unsigned int clr = 0; |
| |
| cec_rxint = i2c_rd32(sd, CECRSTAT); |
| cec_txint = i2c_rd32(sd, CECTSTAT); |
| |
| if (intstatus & MASK_CEC_RINT) |
| clr |= MASK_CECRICLR; |
| if (intstatus & MASK_CEC_TINT) |
| clr |= MASK_CECTICLR; |
| i2c_wr32(sd, CECICLR, clr); |
| |
| if ((intstatus & MASK_CEC_TINT) && cec_txint) { |
| if (cec_txint & MASK_CECTIEND) |
| cec_transmit_attempt_done(state->cec_adap, |
| CEC_TX_STATUS_OK); |
| else if (cec_txint & MASK_CECTIAL) |
| cec_transmit_attempt_done(state->cec_adap, |
| CEC_TX_STATUS_ARB_LOST); |
| else if (cec_txint & MASK_CECTIACK) |
| cec_transmit_attempt_done(state->cec_adap, |
| CEC_TX_STATUS_NACK); |
| else if (cec_txint & MASK_CECTIUR) { |
| /* |
| * Not sure when this bit is set. Treat |
| * it as an error for now. |
| */ |
| cec_transmit_attempt_done(state->cec_adap, |
| CEC_TX_STATUS_ERROR); |
| } |
| if (handled) |
| *handled = true; |
| } |
| if ((intstatus & MASK_CEC_RINT) && |
| (cec_rxint & MASK_CECRIEND)) { |
| struct cec_msg msg = {}; |
| unsigned int i; |
| unsigned int v; |
| |
| v = i2c_rd32(sd, CECRCTR); |
| msg.len = v & 0x1f; |
| for (i = 0; i < msg.len; i++) { |
| v = i2c_rd32(sd, CECRBUF1 + i * 4); |
| msg.msg[i] = v & 0xff; |
| } |
| cec_received_msg(state->cec_adap, &msg); |
| if (handled) |
| *handled = true; |
| } |
| i2c_wr16(sd, INTSTATUS, |
| intstatus & (MASK_CEC_RINT | MASK_CEC_TINT)); |
| } |
| |
| #endif |
| |
| /* --------------- IRQ --------------- */ |
| |
| static void tc358743_format_change(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| struct v4l2_dv_timings timings; |
| const struct v4l2_event tc358743_ev_fmt = { |
| .type = V4L2_EVENT_SOURCE_CHANGE, |
| .u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION, |
| }; |
| |
| if (tc358743_get_detected_timings(sd, &timings)) { |
| enable_stream(sd, false); |
| |
| v4l2_dbg(1, debug, sd, "%s: No signal\n", |
| __func__); |
| } else { |
| if (!v4l2_match_dv_timings(&state->timings, &timings, 0, false)) |
| enable_stream(sd, false); |
| |
| if (debug) |
| v4l2_print_dv_timings(sd->name, |
| "tc358743_format_change: New format: ", |
| &timings, false); |
| } |
| |
| if (sd->devnode) |
| v4l2_subdev_notify_event(sd, &tc358743_ev_fmt); |
| } |
| |
| static void tc358743_init_interrupts(struct v4l2_subdev *sd) |
| { |
| u16 i; |
| |
| /* clear interrupt status registers */ |
| for (i = SYS_INT; i <= KEY_INT; i++) |
| i2c_wr8(sd, i, 0xff); |
| |
| i2c_wr16(sd, INTSTATUS, 0xffff); |
| } |
| |
| static void tc358743_enable_interrupts(struct v4l2_subdev *sd, |
| bool cable_connected) |
| { |
| v4l2_dbg(2, debug, sd, "%s: cable connected = %d\n", __func__, |
| cable_connected); |
| |
| if (cable_connected) { |
| i2c_wr8(sd, SYS_INTM, ~(MASK_M_DDC | MASK_M_DVI_DET | |
| MASK_M_HDMI_DET) & 0xff); |
| i2c_wr8(sd, CLK_INTM, ~MASK_M_IN_DE_CHG); |
| i2c_wr8(sd, CBIT_INTM, ~(MASK_M_CBIT_FS | MASK_M_AF_LOCK | |
| MASK_M_AF_UNLOCK) & 0xff); |
| i2c_wr8(sd, AUDIO_INTM, ~MASK_M_BUFINIT_END); |
| i2c_wr8(sd, MISC_INTM, ~MASK_M_SYNC_CHG); |
| } else { |
| i2c_wr8(sd, SYS_INTM, ~MASK_M_DDC & 0xff); |
| i2c_wr8(sd, CLK_INTM, 0xff); |
| i2c_wr8(sd, CBIT_INTM, 0xff); |
| i2c_wr8(sd, AUDIO_INTM, 0xff); |
| i2c_wr8(sd, MISC_INTM, 0xff); |
| } |
| } |
| |
| static void tc358743_hdmi_audio_int_handler(struct v4l2_subdev *sd, |
| bool *handled) |
| { |
| u8 audio_int_mask = i2c_rd8(sd, AUDIO_INTM); |
| u8 audio_int = i2c_rd8(sd, AUDIO_INT) & ~audio_int_mask; |
| |
| i2c_wr8(sd, AUDIO_INT, audio_int); |
| |
| v4l2_dbg(3, debug, sd, "%s: AUDIO_INT = 0x%02x\n", __func__, audio_int); |
| |
| tc358743_s_ctrl_audio_sampling_rate(sd); |
| tc358743_s_ctrl_audio_present(sd); |
| } |
| |
| static void tc358743_csi_err_int_handler(struct v4l2_subdev *sd, bool *handled) |
| { |
| v4l2_err(sd, "%s: CSI_ERR = 0x%x\n", __func__, i2c_rd32(sd, CSI_ERR)); |
| |
| i2c_wr32(sd, CSI_INT_CLR, MASK_ICRER); |
| } |
| |
| static void tc358743_hdmi_misc_int_handler(struct v4l2_subdev *sd, |
| bool *handled) |
| { |
| u8 misc_int_mask = i2c_rd8(sd, MISC_INTM); |
| u8 misc_int = i2c_rd8(sd, MISC_INT) & ~misc_int_mask; |
| |
| i2c_wr8(sd, MISC_INT, misc_int); |
| |
| v4l2_dbg(3, debug, sd, "%s: MISC_INT = 0x%02x\n", __func__, misc_int); |
| |
| if (misc_int & MASK_I_SYNC_CHG) { |
| /* Reset the HDMI PHY to try to trigger proper lock on the |
| * incoming video format. Erase BKSV to prevent that old keys |
| * are used when a new source is connected. */ |
| if (no_sync(sd) || no_signal(sd)) { |
| tc358743_reset_phy(sd); |
| tc358743_erase_bksv(sd); |
| } |
| |
| tc358743_format_change(sd); |
| |
| misc_int &= ~MASK_I_SYNC_CHG; |
| if (handled) |
| *handled = true; |
| } |
| |
| if (misc_int) { |
| v4l2_err(sd, "%s: Unhandled MISC_INT interrupts: 0x%02x\n", |
| __func__, misc_int); |
| } |
| } |
| |
| static void tc358743_hdmi_cbit_int_handler(struct v4l2_subdev *sd, |
| bool *handled) |
| { |
| u8 cbit_int_mask = i2c_rd8(sd, CBIT_INTM); |
| u8 cbit_int = i2c_rd8(sd, CBIT_INT) & ~cbit_int_mask; |
| |
| i2c_wr8(sd, CBIT_INT, cbit_int); |
| |
| v4l2_dbg(3, debug, sd, "%s: CBIT_INT = 0x%02x\n", __func__, cbit_int); |
| |
| if (cbit_int & MASK_I_CBIT_FS) { |
| |
| v4l2_dbg(1, debug, sd, "%s: Audio sample rate changed\n", |
| __func__); |
| tc358743_s_ctrl_audio_sampling_rate(sd); |
| |
| cbit_int &= ~MASK_I_CBIT_FS; |
| if (handled) |
| *handled = true; |
| } |
| |
| if (cbit_int & (MASK_I_AF_LOCK | MASK_I_AF_UNLOCK)) { |
| |
| v4l2_dbg(1, debug, sd, "%s: Audio present changed\n", |
| __func__); |
| tc358743_s_ctrl_audio_present(sd); |
| |
| cbit_int &= ~(MASK_I_AF_LOCK | MASK_I_AF_UNLOCK); |
| if (handled) |
| *handled = true; |
| } |
| |
| if (cbit_int) { |
| v4l2_err(sd, "%s: Unhandled CBIT_INT interrupts: 0x%02x\n", |
| __func__, cbit_int); |
| } |
| } |
| |
| static void tc358743_hdmi_clk_int_handler(struct v4l2_subdev *sd, bool *handled) |
| { |
| u8 clk_int_mask = i2c_rd8(sd, CLK_INTM); |
| u8 clk_int = i2c_rd8(sd, CLK_INT) & ~clk_int_mask; |
| |
| /* Bit 7 and bit 6 are set even when they are masked */ |
| i2c_wr8(sd, CLK_INT, clk_int | 0x80 | MASK_I_OUT_H_CHG); |
| |
| v4l2_dbg(3, debug, sd, "%s: CLK_INT = 0x%02x\n", __func__, clk_int); |
| |
| if (clk_int & (MASK_I_IN_DE_CHG)) { |
| |
| v4l2_dbg(1, debug, sd, "%s: DE size or position has changed\n", |
| __func__); |
| |
| /* If the source switch to a new resolution with the same pixel |
| * frequency as the existing (e.g. 1080p25 -> 720p50), the |
| * I_SYNC_CHG interrupt is not always triggered, while the |
| * I_IN_DE_CHG interrupt seems to work fine. Format change |
| * notifications are only sent when the signal is stable to |
| * reduce the number of notifications. */ |
| if (!no_signal(sd) && !no_sync(sd)) |
| tc358743_format_change(sd); |
| |
| clk_int &= ~(MASK_I_IN_DE_CHG); |
| if (handled) |
| *handled = true; |
| } |
| |
| if (clk_int) { |
| v4l2_err(sd, "%s: Unhandled CLK_INT interrupts: 0x%02x\n", |
| __func__, clk_int); |
| } |
| } |
| |
| static void tc358743_hdmi_sys_int_handler(struct v4l2_subdev *sd, bool *handled) |
| { |
| struct tc358743_state *state = to_state(sd); |
| u8 sys_int_mask = i2c_rd8(sd, SYS_INTM); |
| u8 sys_int = i2c_rd8(sd, SYS_INT) & ~sys_int_mask; |
| |
| i2c_wr8(sd, SYS_INT, sys_int); |
| |
| v4l2_dbg(3, debug, sd, "%s: SYS_INT = 0x%02x\n", __func__, sys_int); |
| |
| if (sys_int & MASK_I_DDC) { |
| bool tx_5v = tx_5v_power_present(sd); |
| |
| v4l2_dbg(1, debug, sd, "%s: Tx 5V power present: %s\n", |
| __func__, tx_5v ? "yes" : "no"); |
| |
| if (tx_5v) { |
| tc358743_enable_edid(sd); |
| } else { |
| tc358743_enable_interrupts(sd, false); |
| tc358743_disable_edid(sd); |
| memset(&state->timings, 0, sizeof(state->timings)); |
| tc358743_erase_bksv(sd); |
| tc358743_update_controls(sd); |
| } |
| |
| sys_int &= ~MASK_I_DDC; |
| if (handled) |
| *handled = true; |
| } |
| |
| if (sys_int & MASK_I_DVI) { |
| v4l2_dbg(1, debug, sd, "%s: HDMI->DVI change detected\n", |
| __func__); |
| |
| /* Reset the HDMI PHY to try to trigger proper lock on the |
| * incoming video format. Erase BKSV to prevent that old keys |
| * are used when a new source is connected. */ |
| if (no_sync(sd) || no_signal(sd)) { |
| tc358743_reset_phy(sd); |
| tc358743_erase_bksv(sd); |
| } |
| |
| sys_int &= ~MASK_I_DVI; |
| if (handled) |
| *handled = true; |
| } |
| |
| if (sys_int & MASK_I_HDMI) { |
| v4l2_dbg(1, debug, sd, "%s: DVI->HDMI change detected\n", |
| __func__); |
| |
| /* Register is reset in DVI mode (REF_01, c. 6.6.41) */ |
| i2c_wr8(sd, ANA_CTL, MASK_APPL_PCSX_NORMAL | MASK_ANALOG_ON); |
| |
| sys_int &= ~MASK_I_HDMI; |
| if (handled) |
| *handled = true; |
| } |
| |
| if (sys_int) { |
| v4l2_err(sd, "%s: Unhandled SYS_INT interrupts: 0x%02x\n", |
| __func__, sys_int); |
| } |
| } |
| |
| /* --------------- CORE OPS --------------- */ |
| |
| static int tc358743_log_status(struct v4l2_subdev *sd) |
| { |
| struct tc358743_state *state = to_state(sd); |
| struct v4l2_dv_timings timings; |
| uint8_t hdmi_sys_status = i2c_rd8(sd, SYS_STATUS); |
| uint16_t sysctl = i2c_rd16(sd, SYSCTL); |
| u8 vi_status3 = i2c_rd8(sd, VI_STATUS3); |
| const int deep_color_mode[4] = { 8, 10, 12, 16 }; |
| static const char * const input_color_space[] = { |
| "RGB", "YCbCr 601", "opRGB", "YCbCr 709", "NA (4)", |
| "xvYCC 601", "NA(6)", "xvYCC 709", "NA(8)", "sYCC601", |
| "NA(10)", "NA(11)", "NA(12)", "opYCC 601"}; |
| |
| v4l2_info(sd, "-----Chip status-----\n"); |
| v4l2_info(sd, "Chip ID: 0x%02x\n", |
| (i2c_rd16(sd, CHIPID) & MASK_CHIPID) >> 8); |
| v4l2_info(sd, "Chip revision: 0x%02x\n", |
| i2c_rd16(sd, CHIPID) & MASK_REVID); |
| v4l2_info(sd, "Reset: IR: %d, CEC: %d, CSI TX: %d, HDMI: %d\n", |
| !!(sysctl & MASK_IRRST), |
| !!(sysctl & MASK_CECRST), |
| !!(sysctl & MASK_CTXRST), |
| !!(sysctl & MASK_HDMIRST)); |
| v4l2_info(sd, "Sleep mode: %s\n", sysctl & MASK_SLEEP ? "on" : "off"); |
| v4l2_info(sd, "Cable detected (+5V power): %s\n", |
| hdmi_sys_status & MASK_S_DDC5V ? "yes" : "no"); |
| v4l2_info(sd, "DDC lines enabled: %s\n", |
| (i2c_rd8(sd, EDID_MODE) & MASK_EDID_MODE_E_DDC) ? |
| "yes" : "no"); |
| v4l2_info(sd, "Hotplug enabled: %s\n", |
| (i2c_rd8(sd, HPD_CTL) & MASK_HPD_OUT0) ? |
| "yes" : "no"); |
| v4l2_info(sd, "CEC enabled: %s\n", |
| (i2c_rd16(sd, CECEN) & MASK_CECEN) ? "yes" : "no"); |
| v4l2_info(sd, "-----Signal status-----\n"); |
| v4l2_info(sd, "TMDS signal detected: %s\n", |
| hdmi_sys_status & MASK_S_TMDS ? "yes" : "no"); |
| v4l2_info(sd, "Stable sync signal: %s\n", |
| hdmi_sys_status & MASK_S_SYNC ? "yes" : "no"); |
| v4l2_info(sd, "PHY PLL locked: %s\n", |
| hdmi_sys_status & MASK_S_PHY_PLL ? "yes" : "no"); |
| v4l2_info(sd, "PHY DE detected: %s\n", |
| hdmi_sys_status & MASK_S_PHY_SCDT ? "yes" : "no"); |
| |
| if (tc358743_get_detected_timings(sd, &timings)) { |
| v4l2_info(sd, "No video detected\n"); |
| } else { |
| v4l2_print_dv_timings(sd->name, "Detected format: ", &timings, |
| true); |
| } |
| v4l2_print_dv_timings(sd->name, "Configured format: ", &state->timings, |
| true); |
| |
| v4l2_info(sd, "-----CSI-TX status-----\n"); |
| v4l2_info(sd, "Lanes needed: %d\n", |
| tc358743_num_csi_lanes_needed(sd)); |
| v4l2_info(sd, "Lanes in use: %d\n", |
| state->csi_lanes_in_use); |
| v4l2_info(sd, "Waiting for particular sync signal: %s\n", |
| (i2c_rd16(sd, CSI_STATUS) & MASK_S_WSYNC) ? |
| "yes" : "no"); |
| v4l2_info(sd, "Transmit mode: %s\n", |
| (i2c_rd16(sd, CSI_STATUS) & MASK_S_TXACT) ? |
| "yes" : "no"); |
| v4l2_info(sd, "Receive mode: %s\n", |
| (i2c_rd16(sd, CSI_STATUS) & MASK_S_RXACT) ? |
| "yes" : "no"); |
| v4l2_info(sd, "Stopped: %s\n", |
| (i2c_rd16(sd, CSI_STATUS) & MASK_S_HLT) ? |
| "yes" : "no"); |
| v4l2_info(sd, "Color space: %s\n", |
| state->mbus_fmt_code == MEDIA_BUS_FMT_UYVY8_1X16 ? |
| "YCbCr 422 16-bit" : |
| state->mbus_fmt_code == MEDIA_BUS_FMT_RGB888_1X24 ? |
| "RGB 888 24-bit" : "Unsupported"); |
| |
| v4l2_info(sd, "-----%s status-----\n", is_hdmi(sd) ? "HDMI" : "DVI-D"); |
| v4l2_info(sd, "HDCP encrypted content: %s\n", |
| hdmi_sys_status & MASK_S_HDCP ? "yes" : "no"); |
| v4l2_info(sd, "Input color space: %s %s range\n", |
| input_color_space[(vi_status3 & MASK_S_V_COLOR) >> 1], |
| (vi_status3 & MASK_LIMITED) ? "limited" : "full"); |
| if (!is_hdmi(sd)) |
| return 0; |
| v4l2_info(sd, "AV Mute: %s\n", hdmi_sys_status & MASK_S_AVMUTE ? "on" : |
| "off"); |
| v4l2_info(sd, "Deep color mode: %d-bits per channel\n", |
| deep_color_mode[(i2c_rd8(sd, VI_STATUS1) & |
| MASK_S_DEEPCOLOR) >> 2]); |
| print_avi_infoframe(sd); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static void tc358743_print_register_map(struct v4l2_subdev *sd) |
| { |
| v4l2_info(sd, "0x0000-0x00FF: Global Control Register\n"); |
| v4l2_info(sd, "0x0100-0x01FF: CSI2-TX PHY Register\n"); |
| v4l2_info(sd, "0x0200-0x03FF: CSI2-TX PPI Register\n"); |
| v4l2_info(sd, "0x0400-0x05FF: Reserved\n"); |
| v4l2_info(sd, "0x0600-0x06FF: CEC Register\n"); |
| v4l2_info(sd, "0x0700-0x84FF: Reserved\n"); |
| v4l2_info(sd, "0x8500-0x85FF: HDMIRX System Control Register\n"); |
| v4l2_info(sd, "0x8600-0x86FF: HDMIRX Audio Control Register\n"); |
| v4l2_info(sd, "0x8700-0x87FF: HDMIRX InfoFrame packet data Register\n"); |
| v4l2_info(sd, "0x8800-0x88FF: HDMIRX HDCP Port Register\n"); |
| v4l2_info(sd, "0x8900-0x89FF: HDMIRX Video Output Port & 3D Register\n"); |
| v4l2_info(sd, "0x8A00-0x8BFF: Reserved\n"); |
| v4l2_info(sd, "0x8C00-0x8FFF: HDMIRX EDID-RAM (1024bytes)\n"); |
| v4l2_info(sd, "0x9000-0x90FF: HDMIRX GBD Extraction Control\n"); |
| v4l2_info(sd, "0x9100-0x92FF: HDMIRX GBD RAM read\n"); |
| v4l2_info(sd, "0x9300- : Reserved\n"); |
| } |
| |
| static int tc358743_get_reg_size(u16 address) |
| { |
| /* REF_01 p. 66-72 */ |
| if (address <= 0x00ff) |
| return 2; |
| else if ((address >= 0x0100) && (address <= 0x06FF)) |
| return 4; |
| else if ((address >= 0x0700) && (address <= 0x84ff)) |
| return 2; |
| else |
| return 1; |
| } |
| |
| static int tc358743_g_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| if (reg->reg > 0xffff) { |
| tc358743_print_register_map(sd); |
| return -EINVAL; |
| } |
| |
| reg->size = tc358743_get_reg_size(reg->reg); |
| |
| reg->val = i2c_rdreg(sd, reg->reg, reg->size); |
| |
| return 0; |
| } |
| |
| static int tc358743_s_register(struct v4l2_subdev *sd, |
| const struct v4l2_dbg_register *reg) |
| { |
| if (reg->reg > 0xffff) { |
| tc358743_print_register_map(sd); |
| return -EINVAL; |
| } |
| |
| /* It should not be possible for the user to enable HDCP with a simple |
| * v4l2-dbg command. |
| * |
| * DO NOT REMOVE THIS unless all other issues with HDCP have been |
| * resolved. |
| */ |
| if (reg->reg == HDCP_MODE || |
| reg->reg == HDCP_REG1 || |
| reg->reg == HDCP_REG2 || |
| reg->reg == HDCP_REG3 || |
| reg->reg == BCAPS) |
| return 0; |
| |
| i2c_wrreg(sd, (u16)reg->reg, reg->val, |
| tc358743_get_reg_size(reg->reg)); |
| |
| return 0; |
| } |
| #endif |
| |
| static int tc358743_isr(struct v4l2_subdev *sd, u32 status, bool *handled) |
| { |
| u16 intstatus = i2c_rd16(sd, INTSTATUS); |
| |
| v4l2_dbg(1, debug, sd, "%s: IntStatus = 0x%04x\n", __func__, intstatus); |
| |
| if (intstatus & MASK_HDMI_INT) { |
| u8 hdmi_int0 = i2c_rd8(sd, HDMI_INT0); |
| u8 hdmi_int1 = i2c_rd8(sd, HDMI_INT1); |
| |
| if (hdmi_int0 & MASK_I_MISC) |
| tc358743_hdmi_misc_int_handler(sd, handled); |
| if (hdmi_int1 & MASK_I_CBIT) |
| tc358743_hdmi_cbit_int_handler(sd, handled); |
| if (hdmi_int1 & MASK_I_CLK) |
| tc358743_hdmi_clk_int_handler(sd, handled); |
| if (hdmi_int1 & MASK_I_SYS) |
| tc358743_hdmi_sys_int_handler(sd, handled); |
| if (hdmi_int1 & MASK_I_AUD) |
| tc358743_hdmi_audio_int_handler(sd, handled); |
| |
| i2c_wr16(sd, INTSTATUS, MASK_HDMI_INT); |
| intstatus &= ~MASK_HDMI_INT; |
| } |
| |
| #ifdef CONFIG_VIDEO_TC358743_CEC |
| if (intstatus & (MASK_CEC_RINT | MASK_CEC_TINT)) { |
| tc358743_cec_handler(sd, intstatus, handled); |
| i2c_wr16(sd, INTSTATUS, |
| intstatus & (MASK_CEC_RINT | MASK_CEC_TINT)); |
| intstatus &= ~(MASK_CEC_RINT | MASK_CEC_TINT); |
| } |
| #endif |
| |
| if (intstatus & MASK_CSI_INT) { |
| u32 csi_int = i2c_rd32(sd, CSI_INT); |
| |
| if (csi_int & MASK_INTER) |
| tc358743_csi_err_int_handler(sd, handled); |
| |
| i2c_wr16(sd, INTSTATUS, MASK_CSI_INT); |
| } |
| |
| intstatus = i2c_rd16(sd, INTSTATUS); |
| if (intstatus) { |
| v4l2_dbg(1, debug, sd, |
| "%s: Unhandled IntStatus interrupts: 0x%02x\n", |
| __func__, intstatus); |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t tc358743_irq_handler(int irq, void *dev_id) |
| { |
| struct tc358743_state *state = dev_id; |
| bool handled = false; |
| |
| tc358743_isr(&state->sd, 0, &handled); |
| |
| return handled ? IRQ_HANDLED : IRQ_NONE; |
| } |
| |
| static void tc358743_irq_poll_timer(struct timer_list *t) |
| { |
| struct tc358743_state *state = from_timer(state, t, timer); |
| unsigned int msecs; |
| |
| schedule_work(&state->work_i2c_poll); |
| /* |
| * If CEC is present, then we need to poll more frequently, |
| * otherwise we will miss CEC messages. |
| */ |
| msecs = state->cec_adap ? POLL_INTERVAL_CEC_MS : POLL_INTERVAL_MS; |
| mod_timer(&state->timer, jiffies + msecs_to_jiffies(msecs)); |
| } |
| |
| static void tc358743_work_i2c_poll(struct work_struct *work) |
| { |
| struct tc358743_state *state = container_of(work, |
| struct tc358743_state, work_i2c_poll); |
| bool handled; |
| |
| tc358743_isr(&state->sd, 0, &handled); |
| } |
| |
| static int tc358743_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, |
| struct v4l2_event_subscription *sub) |
| { |
| switch (sub->type) { |
| case V4L2_EVENT_SOURCE_CHANGE: |
| return v4l2_src_change_event_subdev_subscribe(sd, fh, sub); |
| case V4L2_EVENT_CTRL: |
| return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| /* --------------- VIDEO OPS --------------- */ |
| |
| static int tc358743_g_input_status(struct v4l2_subdev *sd, u32 *status) |
| { |
| *status = 0; |
| *status |= no_signal(sd) ? V4L2_IN_ST_NO_SIGNAL : 0; |
| *status |= no_sync(sd) ? V4L2_IN_ST_NO_SYNC : 0; |
| |
| v4l2_dbg(1, debug, sd, "%s: status = 0x%x\n", __func__, *status); |
| |
| return 0; |
| } |
| |
| static int tc358743_s_dv_timings(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings *timings) |
| { |
| struct tc358743_state *state = to_state(sd); |
| |
| if (!timings) |
| return -EINVAL; |
| |
| if (debug) |
| v4l2_print_dv_timings(sd->name, "tc358743_s_dv_timings: ", |
| timings, false); |
| |
| if (v4l2_match_dv_timings(&state->timings, timings, 0, false)) { |
| v4l2_dbg(1, debug, sd, "%s: no change\n", __func__); |
| return 0; |
| } |
| |
| if (!v4l2_valid_dv_timings(timings, |
| &tc358743_timings_cap, NULL, NULL)) { |
| v4l2_dbg(1, debug, sd, "%s: timings out of range\n", __func__); |
| return -ERANGE; |
| } |
| |
| state->timings = *timings; |
| |
| enable_stream(sd, false); |
| tc358743_set_pll(sd); |
| tc358743_set_csi(sd); |
| |
| return 0; |
| } |
| |
| static int tc358743_g_dv_timings(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings *timings) |
| { |
| struct tc358743_state *state = to_state(sd); |
| |
| *timings = state->timings; |
| |
| return 0; |
| } |
| |
| static int tc358743_enum_dv_timings(struct v4l2_subdev *sd, |
| struct v4l2_enum_dv_timings *timings) |
| { |
| if (timings->pad != 0) |
| return -EINVAL; |
| |
| return v4l2_enum_dv_timings_cap(timings, |
| &tc358743_timings_cap, NULL, NULL); |
| } |
| |
| static int tc358743_query_dv_timings(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings *timings) |
| { |
| int ret; |
| |
| ret = tc358743_get_detected_timings(sd, timings); |
| if (ret) |
| return ret; |
| |
| if (debug) |
| v4l2_print_dv_timings(sd->name, "tc358743_query_dv_timings: ", |
| timings, false); |
| |
| if (!v4l2_valid_dv_timings(timings, |
| &tc358743_timings_cap, NULL, NULL)) { |
| v4l2_dbg(1, debug, sd, "%s: timings out of range\n", __func__); |
| return -ERANGE; |
| } |
| |
| return 0; |
| } |
| |
| static int tc358743_dv_timings_cap(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings_cap *cap) |
| { |
| if (cap->pad != 0) |
| return -EINVAL; |
| |
| *cap = tc358743_timings_cap; |
| |
| return 0; |
| } |
| |
| static int tc358743_get_mbus_config(struct v4l2_subdev *sd, |
| unsigned int pad, |
| struct v4l2_mbus_config *cfg) |
| { |
| struct tc358743_state *state = to_state(sd); |
| |
| cfg->type = V4L2_MBUS_CSI2_DPHY; |
| |
| /* Support for non-continuous CSI-2 clock is missing in the driver */ |
| cfg->flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; |
| |
| switch (state->csi_lanes_in_use) { |
| case 1: |
| cfg->flags |= V4L2_MBUS_CSI2_1_LANE; |
| break; |
| case 2: |
| cfg->flags |= V4L2_MBUS_CSI2_2_LANE; |
| break; |
| case 3: |
| cfg->flags |= V4L2_MBUS_CSI2_3_LANE; |
| break; |
| case 4: |
| cfg->flags |= V4L2_MBUS_CSI2_4_LANE; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int tc358743_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| enable_stream(sd, enable); |
| if (!enable) { |
| /* Put all lanes in LP-11 state (STOPSTATE) */ |
| tc358743_set_csi(sd); |
| } |
| |
| return 0; |
| } |
| |
| /* --------------- PAD OPS --------------- */ |
| |
| static int tc358743_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| switch (code->index) { |
| case 0: |
| code->code = MEDIA_BUS_FMT_RGB888_1X24; |
| break; |
| case 1: |
| code->code = MEDIA_BUS_FMT_UYVY8_1X16; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int tc358743_get_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *format) |
| { |
| struct tc358743_state *state = to_state(sd); |
| u8 vi_rep = i2c_rd8(sd, VI_REP); |
| |
| if (format->pad != 0) |
| return -EINVAL; |
| |
| format->format.code = state->mbus_fmt_code; |
| format->format.width = state->timings.bt.width; |
| format->format.height = state->timings.bt.height; |
| format->format.field = V4L2_FIELD_NONE; |
| |
| switch (vi_rep & MASK_VOUT_COLOR_SEL) { |
| case MASK_VOUT_COLOR_RGB_FULL: |
| case MASK_VOUT_COLOR_RGB_LIMITED: |
| format->format.colorspace = V4L2_COLORSPACE_SRGB; |
| break; |
| case MASK_VOUT_COLOR_601_YCBCR_LIMITED: |
| case MASK_VOUT_COLOR_601_YCBCR_FULL: |
| format->format.colorspace = V4L2_COLORSPACE_SMPTE170M; |
| break; |
| case MASK_VOUT_COLOR_709_YCBCR_FULL: |
| case MASK_VOUT_COLOR_709_YCBCR_LIMITED: |
| format->format.colorspace = V4L2_COLORSPACE_REC709; |
| break; |
| default: |
| format->format.colorspace = 0; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int tc358743_set_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *format) |
| { |
| struct tc358743_state *state = to_state(sd); |
| |
| u32 code = format->format.code; /* is overwritten by get_fmt */ |
| int ret = tc358743_get_fmt(sd, sd_state, format); |
| |
| format->format.code = code; |
| |
| if (ret) |
| return ret; |
| |
| switch (code) { |
| case MEDIA_BUS_FMT_RGB888_1X24: |
| case MEDIA_BUS_FMT_UYVY8_1X16: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (format->which == V4L2_SUBDEV_FORMAT_TRY) |
| return 0; |
| |
| state->mbus_fmt_code = format->format.code; |
| |
| enable_stream(sd, false); |
| tc358743_set_pll(sd); |
| tc358743_set_csi(sd); |
| tc358743_set_csi_color_space(sd); |
| |
| return 0; |
| } |
| |
| static int tc358743_g_edid(struct v4l2_subdev *sd, |
| struct v4l2_subdev_edid *edid) |
| { |
| struct tc358743_state *state = to_state(sd); |
| |
| memset(edid->reserved, 0, sizeof(edid->reserved)); |
| |
| if (edid->pad != 0) |
| return -EINVAL; |
| |
| if (edid->start_block == 0 && edid->blocks == 0) { |
| edid->blocks = state->edid_blocks_written; |
| return 0; |
| } |
| |
| if (state->edid_blocks_written == 0) |
| return -ENODATA; |
| |
| if (edid->start_block >= state->edid_blocks_written || |
| edid->blocks == 0) |
| return -EINVAL; |
| |
| if (edid->start_block + edid->blocks > state->edid_blocks_written) |
| edid->blocks = state->edid_blocks_written - edid->start_block; |
| |
| i2c_rd(sd, EDID_RAM + (edid->start_block * EDID_BLOCK_SIZE), edid->edid, |
| edid->blocks * EDID_BLOCK_SIZE); |
| |
| return 0; |
| } |
| |
| static int tc358743_s_edid(struct v4l2_subdev *sd, |
| struct v4l2_subdev_edid *edid) |
| { |
| struct tc358743_state *state = to_state(sd); |
| u16 edid_len = edid->blocks * EDID_BLOCK_SIZE; |
| u16 pa; |
| int err; |
| int i; |
| |
| v4l2_dbg(2, debug, sd, "%s, pad %d, start block %d, blocks %d\n", |
| __func__, edid->pad, edid->start_block, edid->blocks); |
| |
| memset(edid->reserved, 0, sizeof(edid->reserved)); |
| |
| if (edid->pad != 0) |
| return -EINVAL; |
| |
| if (edid->start_block != 0) |
| return -EINVAL; |
| |
| if (edid->blocks > EDID_NUM_BLOCKS_MAX) { |
| edid->blocks = EDID_NUM_BLOCKS_MAX; |
| return -E2BIG; |
| } |
| pa = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, NULL); |
| err = v4l2_phys_addr_validate(pa, &pa, NULL); |
| if (err) |
| return err; |
| |
| cec_phys_addr_invalidate(state->cec_adap); |
| |
| tc358743_disable_edid(sd); |
| |
| i2c_wr8(sd, EDID_LEN1, edid_len & 0xff); |
| i2c_wr8(sd, EDID_LEN2, edid_len >> 8); |
| |
| if (edid->blocks == 0) { |
| state->edid_blocks_written = 0; |
| return 0; |
| } |
| |
| for (i = 0; i < edid_len; i += EDID_BLOCK_SIZE) |
| i2c_wr(sd, EDID_RAM + i, edid->edid + i, EDID_BLOCK_SIZE); |
| |
| state->edid_blocks_written = edid->blocks; |
| |
| cec_s_phys_addr(state->cec_adap, pa, false); |
| |
| if (tx_5v_power_present(sd)) |
| tc358743_enable_edid(sd); |
| |
| return 0; |
| } |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| static const struct v4l2_subdev_core_ops tc358743_core_ops = { |
| .log_status = tc358743_log_status, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = tc358743_g_register, |
| .s_register = tc358743_s_register, |
| #endif |
| .interrupt_service_routine = tc358743_isr, |
| .subscribe_event = tc358743_subscribe_event, |
| .unsubscribe_event = v4l2_event_subdev_unsubscribe, |
| }; |
| |
| static const struct v4l2_subdev_video_ops tc358743_video_ops = { |
| .g_input_status = tc358743_g_input_status, |
| .s_dv_timings = tc358743_s_dv_timings, |
| .g_dv_timings = tc358743_g_dv_timings, |
| .query_dv_timings = tc358743_query_dv_timings, |
| .s_stream = tc358743_s_stream, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops tc358743_pad_ops = { |
| .enum_mbus_code = tc358743_enum_mbus_code, |
| .set_fmt = tc358743_set_fmt, |
| .get_fmt = tc358743_get_fmt, |
| .get_edid = tc358743_g_edid, |
| .set_edid = tc358743_s_edid, |
| .enum_dv_timings = tc358743_enum_dv_timings, |
| .dv_timings_cap = tc358743_dv_timings_cap, |
| .get_mbus_config = tc358743_get_mbus_config, |
| }; |
| |
| static const struct v4l2_subdev_ops tc358743_ops = { |
| .core = &tc358743_core_ops, |
| .video = &tc358743_video_ops, |
| .pad = &tc358743_pad_ops, |
| }; |
| |
| /* --------------- CUSTOM CTRLS --------------- */ |
| |
| static const struct v4l2_ctrl_config tc358743_ctrl_audio_sampling_rate = { |
| .id = TC358743_CID_AUDIO_SAMPLING_RATE, |
| .name = "Audio sampling rate", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0, |
| .max = 768000, |
| .step = 1, |
| .def = 0, |
| .flags = V4L2_CTRL_FLAG_READ_ONLY, |
| }; |
| |
| static const struct v4l2_ctrl_config tc358743_ctrl_audio_present = { |
| .id = TC358743_CID_AUDIO_PRESENT, |
| .name = "Audio present", |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .min = 0, |
| .max = 1, |
| .step = 1, |
| .def = 0, |
| .flags = V4L2_CTRL_FLAG_READ_ONLY, |
| }; |
| |
| /* --------------- PROBE / REMOVE --------------- */ |
| |
| #ifdef CONFIG_OF |
| static void tc358743_gpio_reset(struct tc358743_state *state) |
| { |
| usleep_range(5000, 10000); |
| gpiod_set_value(state->reset_gpio, 1); |
| usleep_range(1000, 2000); |
| gpiod_set_value(state->reset_gpio, 0); |
| msleep(20); |
| } |
| |
| static int tc358743_probe_of(struct tc358743_state *state) |
| { |
| struct device *dev = &state->i2c_client->dev; |
| struct v4l2_fwnode_endpoint endpoint = { .bus_type = 0 }; |
| struct device_node *ep; |
| struct clk *refclk; |
| u32 bps_pr_lane; |
| int ret; |
| |
| refclk = devm_clk_get(dev, "refclk"); |
| if (IS_ERR(refclk)) { |
| if (PTR_ERR(refclk) != -EPROBE_DEFER) |
| dev_err(dev, "failed to get refclk: %ld\n", |
| PTR_ERR(refclk)); |
| return PTR_ERR(refclk); |
| } |
| |
| ep = of_graph_get_next_endpoint(dev->of_node, NULL); |
| if (!ep) { |
| dev_err(dev, "missing endpoint node\n"); |
| return -EINVAL; |
| } |
| |
| ret = v4l2_fwnode_endpoint_alloc_parse(of_fwnode_handle(ep), &endpoint); |
| if (ret) { |
| dev_err(dev, "failed to parse endpoint\n"); |
| goto put_node; |
| } |
| |
| if (endpoint.bus_type != V4L2_MBUS_CSI2_DPHY || |
| endpoint.bus.mipi_csi2.num_data_lanes == 0 || |
| endpoint.nr_of_link_frequencies == 0) { |
| dev_err(dev, "missing CSI-2 properties in endpoint\n"); |
| ret = -EINVAL; |
| goto free_endpoint; |
| } |
| |
| if (endpoint.bus.mipi_csi2.num_data_lanes > 4) { |
| dev_err(dev, "invalid number of lanes\n"); |
| ret = -EINVAL; |
| goto free_endpoint; |
| } |
| |
| state->bus = endpoint.bus.mipi_csi2; |
| |
| ret = clk_prepare_enable(refclk); |
| if (ret) { |
| dev_err(dev, "Failed! to enable clock\n"); |
| goto free_endpoint; |
| } |
| |
| state->pdata.refclk_hz = clk_get_rate(refclk); |
| state->pdata.ddc5v_delay = DDC5V_DELAY_100_MS; |
| state->pdata.enable_hdcp = false; |
| /* A FIFO level of 16 should be enough for 2-lane 720p60 at 594 MHz. */ |
| state->pdata.fifo_level = 16; |
| /* |
| * The PLL input clock is obtained by dividing refclk by pll_prd. |
| * It must be between 6 MHz and 40 MHz, lower frequency is better. |
| */ |
| switch (state->pdata.refclk_hz) { |
| case 26000000: |
| case 27000000: |
| case 42000000: |
| state->pdata.pll_prd = state->pdata.refclk_hz / 6000000; |
| break; |
| default: |
| dev_err(dev, "unsupported refclk rate: %u Hz\n", |
| state->pdata.refclk_hz); |
| goto disable_clk; |
| } |
| |
| /* |
| * The CSI bps per lane must be between 62.5 Mbps and 1 Gbps. |
| * The default is 594 Mbps for 4-lane 1080p60 or 2-lane 720p60. |
| */ |
| bps_pr_lane = 2 * endpoint.link_frequencies[0]; |
| if (bps_pr_lane < 62500000U || bps_pr_lane > 1000000000U) { |
| dev_err(dev, "unsupported bps per lane: %u bps\n", bps_pr_lane); |
| ret = -EINVAL; |
| goto disable_clk; |
| } |
| |
| /* The CSI speed per lane is refclk / pll_prd * pll_fbd */ |
| state->pdata.pll_fbd = bps_pr_lane / |
| state->pdata.refclk_hz * state->pdata.pll_prd; |
| |
| /* |
| * FIXME: These timings are from REF_02 for 594 Mbps per lane (297 MHz |
| * link frequency). In principle it should be possible to calculate |
| * them based on link frequency and resolution. |
| */ |
| if (bps_pr_lane != 594000000U) |
| dev_warn(dev, "untested bps per lane: %u bps\n", bps_pr_lane); |
| state->pdata.lineinitcnt = 0xe80; |
| state->pdata.lptxtimecnt = 0x003; |
| /* tclk-preparecnt: 3, tclk-zerocnt: 20 */ |
| state->pdata.tclk_headercnt = 0x1403; |
| state->pdata.tclk_trailcnt = 0x00; |
| /* ths-preparecnt: 3, ths-zerocnt: 1 */ |
| state->pdata.ths_headercnt = 0x0103; |
| state->pdata.twakeup = 0x4882; |
| state->pdata.tclk_postcnt = 0x008; |
| state->pdata.ths_trailcnt = 0x2; |
| state->pdata.hstxvregcnt = 0; |
| |
| state->reset_gpio = devm_gpiod_get_optional(dev, "reset", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(state->reset_gpio)) { |
| dev_err(dev, "failed to get reset gpio\n"); |
| ret = PTR_ERR(state->reset_gpio); |
| goto disable_clk; |
| } |
| |
| if (state->reset_gpio) |
| tc358743_gpio_reset(state); |
| |
| ret = 0; |
| goto free_endpoint; |
| |
| disable_clk: |
| clk_disable_unprepare(refclk); |
| free_endpoint: |
| v4l2_fwnode_endpoint_free(&endpoint); |
| put_node: |
| of_node_put(ep); |
| return ret; |
| } |
| #else |
| static inline int tc358743_probe_of(struct tc358743_state *state) |
| { |
| return -ENODEV; |
| } |
| #endif |
| |
| static int tc358743_probe(struct i2c_client *client) |
| { |
| static struct v4l2_dv_timings default_timing = |
| V4L2_DV_BT_CEA_640X480P59_94; |
| struct tc358743_state *state; |
| struct tc358743_platform_data *pdata = client->dev.platform_data; |
| struct v4l2_subdev *sd; |
| u16 irq_mask = MASK_HDMI_MSK | MASK_CSI_MSK; |
| int err; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -EIO; |
| v4l_dbg(1, debug, client, "chip found @ 0x%x (%s)\n", |
| client->addr << 1, client->adapter->name); |
| |
| state = devm_kzalloc(&client->dev, sizeof(struct tc358743_state), |
| GFP_KERNEL); |
| if (!state) |
| return -ENOMEM; |
| |
| state->i2c_client = client; |
| |
| /* platform data */ |
| if (pdata) { |
| state->pdata = *pdata; |
| state->bus.flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; |
| } else { |
| err = tc358743_probe_of(state); |
| if (err == -ENODEV) |
| v4l_err(client, "No platform data!\n"); |
| if (err) |
| return err; |
| } |
| |
| sd = &state->sd; |
| v4l2_i2c_subdev_init(sd, client, &tc358743_ops); |
| sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; |
| |
| /* i2c access */ |
| if ((i2c_rd16(sd, CHIPID) & MASK_CHIPID) != 0) { |
| v4l2_info(sd, "not a TC358743 on address 0x%x\n", |
| client->addr << 1); |
| return -ENODEV; |
| } |
| |
| /* control handlers */ |
| v4l2_ctrl_handler_init(&state->hdl, 3); |
| |
| state->detect_tx_5v_ctrl = v4l2_ctrl_new_std(&state->hdl, NULL, |
| V4L2_CID_DV_RX_POWER_PRESENT, 0, 1, 0, 0); |
| |
| /* custom controls */ |
| state->audio_sampling_rate_ctrl = v4l2_ctrl_new_custom(&state->hdl, |
| &tc358743_ctrl_audio_sampling_rate, NULL); |
| |
| state->audio_present_ctrl = v4l2_ctrl_new_custom(&state->hdl, |
| &tc358743_ctrl_audio_present, NULL); |
| |
| sd->ctrl_handler = &state->hdl; |
| if (state->hdl.error) { |
| err = state->hdl.error; |
| goto err_hdl; |
| } |
| |
| if (tc358743_update_controls(sd)) { |
| err = -ENODEV; |
| goto err_hdl; |
| } |
| |
| state->pad.flags = MEDIA_PAD_FL_SOURCE; |
| sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; |
| err = media_entity_pads_init(&sd->entity, 1, &state->pad); |
| if (err < 0) |
| goto err_hdl; |
| |
| state->mbus_fmt_code = MEDIA_BUS_FMT_RGB888_1X24; |
| |
| sd->dev = &client->dev; |
| err = v4l2_async_register_subdev(sd); |
| if (err < 0) |
| goto err_hdl; |
| |
| mutex_init(&state->confctl_mutex); |
| |
| INIT_DELAYED_WORK(&state->delayed_work_enable_hotplug, |
| tc358743_delayed_work_enable_hotplug); |
| |
| #ifdef CONFIG_VIDEO_TC358743_CEC |
| state->cec_adap = cec_allocate_adapter(&tc358743_cec_adap_ops, |
| state, dev_name(&client->dev), |
| CEC_CAP_DEFAULTS | CEC_CAP_MONITOR_ALL, CEC_MAX_LOG_ADDRS); |
| if (IS_ERR(state->cec_adap)) { |
| err = PTR_ERR(state->cec_adap); |
| goto err_hdl; |
| } |
| irq_mask |= MASK_CEC_RMSK | MASK_CEC_TMSK; |
| #endif |
| |
| tc358743_initial_setup(sd); |
| |
| tc358743_s_dv_timings(sd, &default_timing); |
| |
| tc358743_set_csi_color_space(sd); |
| |
| tc358743_init_interrupts(sd); |
| |
| if (state->i2c_client->irq) { |
| err = devm_request_threaded_irq(&client->dev, |
| state->i2c_client->irq, |
| NULL, tc358743_irq_handler, |
| IRQF_TRIGGER_HIGH | IRQF_ONESHOT, |
| "tc358743", state); |
| if (err) |
| goto err_work_queues; |
| } else { |
| INIT_WORK(&state->work_i2c_poll, |
| tc358743_work_i2c_poll); |
| timer_setup(&state->timer, tc358743_irq_poll_timer, 0); |
| state->timer.expires = jiffies + |
| msecs_to_jiffies(POLL_INTERVAL_MS); |
| add_timer(&state->timer); |
| } |
| |
| err = cec_register_adapter(state->cec_adap, &client->dev); |
| if (err < 0) { |
| pr_err("%s: failed to register the cec device\n", __func__); |
| cec_delete_adapter(state->cec_adap); |
| state->cec_adap = NULL; |
| goto err_work_queues; |
| } |
| |
| tc358743_enable_interrupts(sd, tx_5v_power_present(sd)); |
| i2c_wr16(sd, INTMASK, ~irq_mask); |
| |
| err = v4l2_ctrl_handler_setup(sd->ctrl_handler); |
| if (err) |
| goto err_work_queues; |
| |
| v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, |
| client->addr << 1, client->adapter->name); |
| |
| return 0; |
| |
| err_work_queues: |
| cec_unregister_adapter(state->cec_adap); |
| if (!state->i2c_client->irq) |
| flush_work(&state->work_i2c_poll); |
| cancel_delayed_work(&state->delayed_work_enable_hotplug); |
| mutex_destroy(&state->confctl_mutex); |
| err_hdl: |
| media_entity_cleanup(&sd->entity); |
| v4l2_ctrl_handler_free(&state->hdl); |
| return err; |
| } |
| |
| static int tc358743_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct tc358743_state *state = to_state(sd); |
| |
| if (!state->i2c_client->irq) { |
| del_timer_sync(&state->timer); |
| flush_work(&state->work_i2c_poll); |
| } |
| cancel_delayed_work_sync(&state->delayed_work_enable_hotplug); |
| cec_unregister_adapter(state->cec_adap); |
| v4l2_async_unregister_subdev(sd); |
| v4l2_device_unregister_subdev(sd); |
| mutex_destroy(&state->confctl_mutex); |
| media_entity_cleanup(&sd->entity); |
| v4l2_ctrl_handler_free(&state->hdl); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id tc358743_id[] = { |
| {"tc358743", 0}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, tc358743_id); |
| |
| #if IS_ENABLED(CONFIG_OF) |
| static const struct of_device_id tc358743_of_match[] = { |
| { .compatible = "toshiba,tc358743" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, tc358743_of_match); |
| #endif |
| |
| static struct i2c_driver tc358743_driver = { |
| .driver = { |
| .name = "tc358743", |
| .of_match_table = of_match_ptr(tc358743_of_match), |
| }, |
| .probe_new = tc358743_probe, |
| .remove = tc358743_remove, |
| .id_table = tc358743_id, |
| }; |
| |
| module_i2c_driver(tc358743_driver); |