| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * budget-core.c: driver for the SAA7146 based Budget DVB cards |
| * |
| * Compiled from various sources by Michael Hunold <michael@mihu.de> |
| * |
| * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de> |
| * |
| * Copyright (C) 1999-2002 Ralph Metzler |
| * & Marcus Metzler for convergence integrated media GmbH |
| * |
| * 26feb2004 Support for FS Activy Card (Grundig tuner) by |
| * Michael Dreher <michael@5dot1.de>, |
| * Oliver Endriss <o.endriss@gmx.de>, |
| * Andreas 'randy' Weinberger |
| * |
| * the project's page is at https://linuxtv.org |
| */ |
| |
| |
| #include "budget.h" |
| #include "ttpci-eeprom.h" |
| |
| #define TS_WIDTH (2 * TS_SIZE) |
| #define TS_WIDTH_ACTIVY TS_SIZE |
| #define TS_WIDTH_DVBC TS_SIZE |
| #define TS_HEIGHT_MASK 0xf00 |
| #define TS_HEIGHT_MASK_ACTIVY 0xc00 |
| #define TS_HEIGHT_MASK_DVBC 0xe00 |
| #define TS_MIN_BUFSIZE_K 188 |
| #define TS_MAX_BUFSIZE_K 1410 |
| #define TS_MAX_BUFSIZE_K_ACTIVY 564 |
| #define TS_MAX_BUFSIZE_K_DVBC 1316 |
| #define BUFFER_WARNING_WAIT (30*HZ) |
| |
| int budget_debug; |
| static int dma_buffer_size = TS_MIN_BUFSIZE_K; |
| module_param_named(debug, budget_debug, int, 0644); |
| module_param_named(bufsize, dma_buffer_size, int, 0444); |
| MODULE_PARM_DESC(debug, "Turn on/off budget debugging (default:off)."); |
| MODULE_PARM_DESC(bufsize, "DMA buffer size in KB, default: 188, min: 188, max: 1410 (Activy: 564)"); |
| |
| /**************************************************************************** |
| * TT budget / WinTV Nova |
| ****************************************************************************/ |
| |
| static int stop_ts_capture(struct budget *budget) |
| { |
| dprintk(2, "budget: %p\n", budget); |
| |
| saa7146_write(budget->dev, MC1, MASK_20); // DMA3 off |
| SAA7146_IER_DISABLE(budget->dev, MASK_10); |
| return 0; |
| } |
| |
| static int start_ts_capture(struct budget *budget) |
| { |
| struct saa7146_dev *dev = budget->dev; |
| |
| dprintk(2, "budget: %p\n", budget); |
| |
| if (!budget->feeding || !budget->fe_synced) |
| return 0; |
| |
| saa7146_write(dev, MC1, MASK_20); // DMA3 off |
| |
| memset(budget->grabbing, 0x00, budget->buffer_size); |
| |
| saa7146_write(dev, PCI_BT_V1, 0x001c0000 | (saa7146_read(dev, PCI_BT_V1) & ~0x001f0000)); |
| |
| budget->ttbp = 0; |
| |
| /* |
| * Signal path on the Activy: |
| * |
| * tuner -> SAA7146 port A -> SAA7146 BRS -> SAA7146 DMA3 -> memory |
| * |
| * Since the tuner feeds 204 bytes packets into the SAA7146, |
| * DMA3 is configured to strip the trailing 16 FEC bytes: |
| * Pitch: 188, NumBytes3: 188, NumLines3: 1024 |
| */ |
| |
| switch(budget->card->type) { |
| case BUDGET_FS_ACTIVY: |
| saa7146_write(dev, DD1_INIT, 0x04000000); |
| saa7146_write(dev, MC2, (MASK_09 | MASK_25)); |
| saa7146_write(dev, BRS_CTRL, 0x00000000); |
| break; |
| case BUDGET_PATCH: |
| saa7146_write(dev, DD1_INIT, 0x00000200); |
| saa7146_write(dev, MC2, (MASK_10 | MASK_26)); |
| saa7146_write(dev, BRS_CTRL, 0x60000000); |
| break; |
| case BUDGET_CIN1200C_MK3: |
| case BUDGET_KNC1C_MK3: |
| case BUDGET_KNC1C_TDA10024: |
| case BUDGET_KNC1CP_MK3: |
| if (budget->video_port == BUDGET_VIDEO_PORTA) { |
| saa7146_write(dev, DD1_INIT, 0x06000200); |
| saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); |
| saa7146_write(dev, BRS_CTRL, 0x00000000); |
| } else { |
| saa7146_write(dev, DD1_INIT, 0x00000600); |
| saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); |
| saa7146_write(dev, BRS_CTRL, 0x60000000); |
| } |
| break; |
| default: |
| if (budget->video_port == BUDGET_VIDEO_PORTA) { |
| saa7146_write(dev, DD1_INIT, 0x06000200); |
| saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); |
| saa7146_write(dev, BRS_CTRL, 0x00000000); |
| } else { |
| saa7146_write(dev, DD1_INIT, 0x02000600); |
| saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); |
| saa7146_write(dev, BRS_CTRL, 0x60000000); |
| } |
| } |
| |
| saa7146_write(dev, MC2, (MASK_08 | MASK_24)); |
| mdelay(10); |
| |
| saa7146_write(dev, BASE_ODD3, 0); |
| if (budget->buffer_size > budget->buffer_height * budget->buffer_width) { |
| // using odd/even buffers |
| saa7146_write(dev, BASE_EVEN3, budget->buffer_height * budget->buffer_width); |
| } else { |
| // using a single buffer |
| saa7146_write(dev, BASE_EVEN3, 0); |
| } |
| saa7146_write(dev, PROT_ADDR3, budget->buffer_size); |
| saa7146_write(dev, BASE_PAGE3, budget->pt.dma | ME1 | 0x90); |
| |
| saa7146_write(dev, PITCH3, budget->buffer_width); |
| saa7146_write(dev, NUM_LINE_BYTE3, |
| (budget->buffer_height << 16) | budget->buffer_width); |
| |
| saa7146_write(dev, MC2, (MASK_04 | MASK_20)); |
| |
| SAA7146_ISR_CLEAR(budget->dev, MASK_10); /* VPE */ |
| SAA7146_IER_ENABLE(budget->dev, MASK_10); /* VPE */ |
| saa7146_write(dev, MC1, (MASK_04 | MASK_20)); /* DMA3 on */ |
| |
| return 0; |
| } |
| |
| static int budget_read_fe_status(struct dvb_frontend *fe, |
| enum fe_status *status) |
| { |
| struct budget *budget = (struct budget *) fe->dvb->priv; |
| int synced; |
| int ret; |
| |
| if (budget->read_fe_status) |
| ret = budget->read_fe_status(fe, status); |
| else |
| ret = -EINVAL; |
| |
| if (!ret) { |
| synced = (*status & FE_HAS_LOCK); |
| if (synced != budget->fe_synced) { |
| budget->fe_synced = synced; |
| spin_lock(&budget->feedlock); |
| if (synced) |
| start_ts_capture(budget); |
| else |
| stop_ts_capture(budget); |
| spin_unlock(&budget->feedlock); |
| } |
| } |
| return ret; |
| } |
| |
| static void vpeirq(struct tasklet_struct *t) |
| { |
| struct budget *budget = from_tasklet(budget, t, vpe_tasklet); |
| u8 *mem = (u8 *) (budget->grabbing); |
| u32 olddma = budget->ttbp; |
| u32 newdma = saa7146_read(budget->dev, PCI_VDP3); |
| u32 count; |
| |
| /* Ensure streamed PCI data is synced to CPU */ |
| dma_sync_sg_for_cpu(&budget->dev->pci->dev, budget->pt.slist, |
| budget->pt.nents, DMA_FROM_DEVICE); |
| |
| /* nearest lower position divisible by 188 */ |
| newdma -= newdma % 188; |
| |
| if (newdma >= budget->buffer_size) |
| return; |
| |
| budget->ttbp = newdma; |
| |
| if (budget->feeding == 0 || newdma == olddma) |
| return; |
| |
| if (newdma > olddma) { /* no wraparound, dump olddma..newdma */ |
| count = newdma - olddma; |
| dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188); |
| } else { /* wraparound, dump olddma..buflen and 0..newdma */ |
| count = budget->buffer_size - olddma; |
| dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188); |
| count += newdma; |
| dvb_dmx_swfilter_packets(&budget->demux, mem, newdma / 188); |
| } |
| |
| if (count > budget->buffer_warning_threshold) |
| budget->buffer_warnings++; |
| |
| if (budget->buffer_warnings && time_after(jiffies, budget->buffer_warning_time)) { |
| printk("%s %s: used %d times >80%% of buffer (%u bytes now)\n", |
| budget->dev->name, __func__, budget->buffer_warnings, count); |
| budget->buffer_warning_time = jiffies + BUFFER_WARNING_WAIT; |
| budget->buffer_warnings = 0; |
| } |
| } |
| |
| |
| static int ttpci_budget_debiread_nolock(struct budget *budget, u32 config, |
| int addr, int count, int nobusyloop) |
| { |
| struct saa7146_dev *saa = budget->dev; |
| int result; |
| |
| result = saa7146_wait_for_debi_done(saa, nobusyloop); |
| if (result < 0) |
| return result; |
| |
| saa7146_write(saa, DEBI_COMMAND, (count << 17) | 0x10000 | (addr & 0xffff)); |
| saa7146_write(saa, DEBI_CONFIG, config); |
| saa7146_write(saa, DEBI_PAGE, 0); |
| saa7146_write(saa, MC2, (2 << 16) | 2); |
| |
| result = saa7146_wait_for_debi_done(saa, nobusyloop); |
| if (result < 0) |
| return result; |
| |
| result = saa7146_read(saa, DEBI_AD); |
| result &= (0xffffffffUL >> ((4 - count) * 8)); |
| return result; |
| } |
| |
| int ttpci_budget_debiread(struct budget *budget, u32 config, int addr, int count, |
| int uselocks, int nobusyloop) |
| { |
| if (count > 4 || count <= 0) |
| return 0; |
| |
| if (uselocks) { |
| unsigned long flags; |
| int result; |
| |
| spin_lock_irqsave(&budget->debilock, flags); |
| result = ttpci_budget_debiread_nolock(budget, config, addr, |
| count, nobusyloop); |
| spin_unlock_irqrestore(&budget->debilock, flags); |
| return result; |
| } |
| return ttpci_budget_debiread_nolock(budget, config, addr, |
| count, nobusyloop); |
| } |
| |
| static int ttpci_budget_debiwrite_nolock(struct budget *budget, u32 config, |
| int addr, int count, u32 value, int nobusyloop) |
| { |
| struct saa7146_dev *saa = budget->dev; |
| int result; |
| |
| result = saa7146_wait_for_debi_done(saa, nobusyloop); |
| if (result < 0) |
| return result; |
| |
| saa7146_write(saa, DEBI_COMMAND, (count << 17) | 0x00000 | (addr & 0xffff)); |
| saa7146_write(saa, DEBI_CONFIG, config); |
| saa7146_write(saa, DEBI_PAGE, 0); |
| saa7146_write(saa, DEBI_AD, value); |
| saa7146_write(saa, MC2, (2 << 16) | 2); |
| |
| result = saa7146_wait_for_debi_done(saa, nobusyloop); |
| return result < 0 ? result : 0; |
| } |
| |
| int ttpci_budget_debiwrite(struct budget *budget, u32 config, int addr, |
| int count, u32 value, int uselocks, int nobusyloop) |
| { |
| if (count > 4 || count <= 0) |
| return 0; |
| |
| if (uselocks) { |
| unsigned long flags; |
| int result; |
| |
| spin_lock_irqsave(&budget->debilock, flags); |
| result = ttpci_budget_debiwrite_nolock(budget, config, addr, |
| count, value, nobusyloop); |
| spin_unlock_irqrestore(&budget->debilock, flags); |
| return result; |
| } |
| return ttpci_budget_debiwrite_nolock(budget, config, addr, |
| count, value, nobusyloop); |
| } |
| |
| |
| /**************************************************************************** |
| * DVB API SECTION |
| ****************************************************************************/ |
| |
| static int budget_start_feed(struct dvb_demux_feed *feed) |
| { |
| struct dvb_demux *demux = feed->demux; |
| struct budget *budget = (struct budget *) demux->priv; |
| int status = 0; |
| |
| dprintk(2, "budget: %p\n", budget); |
| |
| if (!demux->dmx.frontend) |
| return -EINVAL; |
| |
| spin_lock(&budget->feedlock); |
| feed->pusi_seen = false; /* have a clean section start */ |
| if (budget->feeding++ == 0) |
| status = start_ts_capture(budget); |
| spin_unlock(&budget->feedlock); |
| return status; |
| } |
| |
| static int budget_stop_feed(struct dvb_demux_feed *feed) |
| { |
| struct dvb_demux *demux = feed->demux; |
| struct budget *budget = (struct budget *) demux->priv; |
| int status = 0; |
| |
| dprintk(2, "budget: %p\n", budget); |
| |
| spin_lock(&budget->feedlock); |
| if (--budget->feeding == 0) |
| status = stop_ts_capture(budget); |
| spin_unlock(&budget->feedlock); |
| return status; |
| } |
| |
| static int budget_register(struct budget *budget) |
| { |
| struct dvb_demux *dvbdemux = &budget->demux; |
| int ret; |
| |
| dprintk(2, "budget: %p\n", budget); |
| |
| dvbdemux->priv = (void *) budget; |
| |
| dvbdemux->filternum = 256; |
| dvbdemux->feednum = 256; |
| dvbdemux->start_feed = budget_start_feed; |
| dvbdemux->stop_feed = budget_stop_feed; |
| dvbdemux->write_to_decoder = NULL; |
| |
| dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | |
| DMX_MEMORY_BASED_FILTERING); |
| |
| dvb_dmx_init(&budget->demux); |
| |
| budget->dmxdev.filternum = 256; |
| budget->dmxdev.demux = &dvbdemux->dmx; |
| budget->dmxdev.capabilities = 0; |
| |
| dvb_dmxdev_init(&budget->dmxdev, &budget->dvb_adapter); |
| |
| budget->hw_frontend.source = DMX_FRONTEND_0; |
| |
| ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->hw_frontend); |
| |
| if (ret < 0) |
| goto err_release_dmx; |
| |
| budget->mem_frontend.source = DMX_MEMORY_FE; |
| ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->mem_frontend); |
| if (ret < 0) |
| goto err_release_dmx; |
| |
| ret = dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, &budget->hw_frontend); |
| if (ret < 0) |
| goto err_release_dmx; |
| |
| dvb_net_init(&budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx); |
| |
| return 0; |
| |
| err_release_dmx: |
| dvb_dmxdev_release(&budget->dmxdev); |
| dvb_dmx_release(&budget->demux); |
| return ret; |
| } |
| |
| static void budget_unregister(struct budget *budget) |
| { |
| struct dvb_demux *dvbdemux = &budget->demux; |
| |
| dprintk(2, "budget: %p\n", budget); |
| |
| dvb_net_release(&budget->dvb_net); |
| |
| dvbdemux->dmx.close(&dvbdemux->dmx); |
| dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &budget->hw_frontend); |
| dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &budget->mem_frontend); |
| |
| dvb_dmxdev_release(&budget->dmxdev); |
| dvb_dmx_release(&budget->demux); |
| } |
| |
| int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, |
| struct saa7146_pci_extension_data *info, |
| struct module *owner, short *adapter_nums) |
| { |
| int ret = 0; |
| struct budget_info *bi = info->ext_priv; |
| int max_bufsize; |
| int height_mask; |
| |
| memset(budget, 0, sizeof(struct budget)); |
| |
| dprintk(2, "dev: %p, budget: %p\n", dev, budget); |
| |
| budget->card = bi; |
| budget->dev = (struct saa7146_dev *) dev; |
| |
| switch(budget->card->type) { |
| case BUDGET_FS_ACTIVY: |
| budget->buffer_width = TS_WIDTH_ACTIVY; |
| max_bufsize = TS_MAX_BUFSIZE_K_ACTIVY; |
| height_mask = TS_HEIGHT_MASK_ACTIVY; |
| break; |
| |
| case BUDGET_KNC1C: |
| case BUDGET_KNC1CP: |
| case BUDGET_CIN1200C: |
| case BUDGET_KNC1C_MK3: |
| case BUDGET_KNC1C_TDA10024: |
| case BUDGET_KNC1CP_MK3: |
| case BUDGET_CIN1200C_MK3: |
| budget->buffer_width = TS_WIDTH_DVBC; |
| max_bufsize = TS_MAX_BUFSIZE_K_DVBC; |
| height_mask = TS_HEIGHT_MASK_DVBC; |
| break; |
| |
| default: |
| budget->buffer_width = TS_WIDTH; |
| max_bufsize = TS_MAX_BUFSIZE_K; |
| height_mask = TS_HEIGHT_MASK; |
| } |
| |
| if (dma_buffer_size < TS_MIN_BUFSIZE_K) |
| dma_buffer_size = TS_MIN_BUFSIZE_K; |
| else if (dma_buffer_size > max_bufsize) |
| dma_buffer_size = max_bufsize; |
| |
| budget->buffer_height = dma_buffer_size * 1024 / budget->buffer_width; |
| if (budget->buffer_height > 0xfff) { |
| budget->buffer_height /= 2; |
| budget->buffer_height &= height_mask; |
| budget->buffer_size = 2 * budget->buffer_height * budget->buffer_width; |
| } else { |
| budget->buffer_height &= height_mask; |
| budget->buffer_size = budget->buffer_height * budget->buffer_width; |
| } |
| budget->buffer_warning_threshold = budget->buffer_size * 80/100; |
| budget->buffer_warnings = 0; |
| budget->buffer_warning_time = jiffies; |
| |
| dprintk(2, "%s: buffer type = %s, width = %d, height = %d\n", |
| budget->dev->name, |
| budget->buffer_size > budget->buffer_width * budget->buffer_height ? "odd/even" : "single", |
| budget->buffer_width, budget->buffer_height); |
| printk("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size); |
| |
| ret = dvb_register_adapter(&budget->dvb_adapter, budget->card->name, |
| owner, &budget->dev->pci->dev, adapter_nums); |
| if (ret < 0) |
| return ret; |
| |
| /* set dd1 stream a & b */ |
| saa7146_write(dev, DD1_STREAM_B, 0x00000000); |
| saa7146_write(dev, MC2, (MASK_09 | MASK_25)); |
| saa7146_write(dev, MC2, (MASK_10 | MASK_26)); |
| saa7146_write(dev, DD1_INIT, 0x02000000); |
| saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); |
| |
| if (bi->type != BUDGET_FS_ACTIVY) |
| budget->video_port = BUDGET_VIDEO_PORTB; |
| else |
| budget->video_port = BUDGET_VIDEO_PORTA; |
| spin_lock_init(&budget->feedlock); |
| spin_lock_init(&budget->debilock); |
| |
| /* the Siemens DVB needs this if you want to have the i2c chips |
| get recognized before the main driver is loaded */ |
| if (bi->type != BUDGET_FS_ACTIVY) |
| saa7146_write(dev, GPIO_CTRL, 0x500000); /* GPIO 3 = 1 */ |
| |
| strscpy(budget->i2c_adap.name, budget->card->name, |
| sizeof(budget->i2c_adap.name)); |
| |
| saa7146_i2c_adapter_prepare(dev, &budget->i2c_adap, SAA7146_I2C_BUS_BIT_RATE_120); |
| strscpy(budget->i2c_adap.name, budget->card->name, |
| sizeof(budget->i2c_adap.name)); |
| |
| if (i2c_add_adapter(&budget->i2c_adap) < 0) { |
| ret = -ENOMEM; |
| goto err_dvb_unregister; |
| } |
| |
| ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter.proposed_mac); |
| |
| budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, budget->buffer_size, &budget->pt); |
| if (NULL == budget->grabbing) { |
| ret = -ENOMEM; |
| goto err_del_i2c; |
| } |
| |
| saa7146_write(dev, PCI_BT_V1, 0x001c0000); |
| /* upload all */ |
| saa7146_write(dev, GPIO_CTRL, 0x000000); |
| |
| tasklet_setup(&budget->vpe_tasklet, vpeirq); |
| |
| /* frontend power on */ |
| if (bi->type != BUDGET_FS_ACTIVY) |
| saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); |
| |
| if ((ret = budget_register(budget)) == 0) |
| return 0; /* Everything OK */ |
| |
| /* An error occurred, cleanup resources */ |
| saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt); |
| |
| err_del_i2c: |
| i2c_del_adapter(&budget->i2c_adap); |
| |
| err_dvb_unregister: |
| dvb_unregister_adapter(&budget->dvb_adapter); |
| |
| return ret; |
| } |
| |
| void ttpci_budget_init_hooks(struct budget *budget) |
| { |
| if (budget->dvb_frontend && !budget->read_fe_status) { |
| budget->read_fe_status = budget->dvb_frontend->ops.read_status; |
| budget->dvb_frontend->ops.read_status = budget_read_fe_status; |
| } |
| } |
| |
| int ttpci_budget_deinit(struct budget *budget) |
| { |
| struct saa7146_dev *dev = budget->dev; |
| |
| dprintk(2, "budget: %p\n", budget); |
| |
| budget_unregister(budget); |
| |
| tasklet_kill(&budget->vpe_tasklet); |
| |
| saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt); |
| |
| i2c_del_adapter(&budget->i2c_adap); |
| |
| dvb_unregister_adapter(&budget->dvb_adapter); |
| |
| return 0; |
| } |
| |
| void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr) |
| { |
| struct budget *budget = (struct budget *) dev->ext_priv; |
| |
| dprintk(8, "dev: %p, budget: %p\n", dev, budget); |
| |
| if (*isr & MASK_10) |
| tasklet_schedule(&budget->vpe_tasklet); |
| } |
| |
| void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port) |
| { |
| struct budget *budget = (struct budget *) dev->ext_priv; |
| |
| spin_lock(&budget->feedlock); |
| budget->video_port = video_port; |
| if (budget->feeding) { |
| stop_ts_capture(budget); |
| start_ts_capture(budget); |
| } |
| spin_unlock(&budget->feedlock); |
| } |
| |
| EXPORT_SYMBOL_GPL(ttpci_budget_debiread); |
| EXPORT_SYMBOL_GPL(ttpci_budget_debiwrite); |
| EXPORT_SYMBOL_GPL(ttpci_budget_init); |
| EXPORT_SYMBOL_GPL(ttpci_budget_init_hooks); |
| EXPORT_SYMBOL_GPL(ttpci_budget_deinit); |
| EXPORT_SYMBOL_GPL(ttpci_budget_irq10_handler); |
| EXPORT_SYMBOL_GPL(ttpci_budget_set_video_port); |
| EXPORT_SYMBOL_GPL(budget_debug); |
| |
| MODULE_LICENSE("GPL"); |