| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright(c) 2013 - 2021 Intel Corporation. */ |
| |
| #include "i40e.h" |
| #include "i40e_type.h" |
| #include "i40e_adminq.h" |
| #include "i40e_prototype.h" |
| #include <linux/avf/virtchnl.h> |
| |
| /** |
| * i40e_set_mac_type - Sets MAC type |
| * @hw: pointer to the HW structure |
| * |
| * This function sets the mac type of the adapter based on the |
| * vendor ID and device ID stored in the hw structure. |
| **/ |
| i40e_status i40e_set_mac_type(struct i40e_hw *hw) |
| { |
| i40e_status status = 0; |
| |
| if (hw->vendor_id == PCI_VENDOR_ID_INTEL) { |
| switch (hw->device_id) { |
| case I40E_DEV_ID_SFP_XL710: |
| case I40E_DEV_ID_QEMU: |
| case I40E_DEV_ID_KX_B: |
| case I40E_DEV_ID_KX_C: |
| case I40E_DEV_ID_QSFP_A: |
| case I40E_DEV_ID_QSFP_B: |
| case I40E_DEV_ID_QSFP_C: |
| case I40E_DEV_ID_5G_BASE_T_BC: |
| case I40E_DEV_ID_10G_BASE_T: |
| case I40E_DEV_ID_10G_BASE_T4: |
| case I40E_DEV_ID_10G_BASE_T_BC: |
| case I40E_DEV_ID_10G_B: |
| case I40E_DEV_ID_10G_SFP: |
| case I40E_DEV_ID_20G_KR2: |
| case I40E_DEV_ID_20G_KR2_A: |
| case I40E_DEV_ID_25G_B: |
| case I40E_DEV_ID_25G_SFP28: |
| case I40E_DEV_ID_X710_N3000: |
| case I40E_DEV_ID_XXV710_N3000: |
| hw->mac.type = I40E_MAC_XL710; |
| break; |
| case I40E_DEV_ID_KX_X722: |
| case I40E_DEV_ID_QSFP_X722: |
| case I40E_DEV_ID_SFP_X722: |
| case I40E_DEV_ID_1G_BASE_T_X722: |
| case I40E_DEV_ID_10G_BASE_T_X722: |
| case I40E_DEV_ID_SFP_I_X722: |
| hw->mac.type = I40E_MAC_X722; |
| break; |
| default: |
| hw->mac.type = I40E_MAC_GENERIC; |
| break; |
| } |
| } else { |
| status = I40E_ERR_DEVICE_NOT_SUPPORTED; |
| } |
| |
| hw_dbg(hw, "i40e_set_mac_type found mac: %d, returns: %d\n", |
| hw->mac.type, status); |
| return status; |
| } |
| |
| /** |
| * i40e_aq_str - convert AQ err code to a string |
| * @hw: pointer to the HW structure |
| * @aq_err: the AQ error code to convert |
| **/ |
| const char *i40e_aq_str(struct i40e_hw *hw, enum i40e_admin_queue_err aq_err) |
| { |
| switch (aq_err) { |
| case I40E_AQ_RC_OK: |
| return "OK"; |
| case I40E_AQ_RC_EPERM: |
| return "I40E_AQ_RC_EPERM"; |
| case I40E_AQ_RC_ENOENT: |
| return "I40E_AQ_RC_ENOENT"; |
| case I40E_AQ_RC_ESRCH: |
| return "I40E_AQ_RC_ESRCH"; |
| case I40E_AQ_RC_EINTR: |
| return "I40E_AQ_RC_EINTR"; |
| case I40E_AQ_RC_EIO: |
| return "I40E_AQ_RC_EIO"; |
| case I40E_AQ_RC_ENXIO: |
| return "I40E_AQ_RC_ENXIO"; |
| case I40E_AQ_RC_E2BIG: |
| return "I40E_AQ_RC_E2BIG"; |
| case I40E_AQ_RC_EAGAIN: |
| return "I40E_AQ_RC_EAGAIN"; |
| case I40E_AQ_RC_ENOMEM: |
| return "I40E_AQ_RC_ENOMEM"; |
| case I40E_AQ_RC_EACCES: |
| return "I40E_AQ_RC_EACCES"; |
| case I40E_AQ_RC_EFAULT: |
| return "I40E_AQ_RC_EFAULT"; |
| case I40E_AQ_RC_EBUSY: |
| return "I40E_AQ_RC_EBUSY"; |
| case I40E_AQ_RC_EEXIST: |
| return "I40E_AQ_RC_EEXIST"; |
| case I40E_AQ_RC_EINVAL: |
| return "I40E_AQ_RC_EINVAL"; |
| case I40E_AQ_RC_ENOTTY: |
| return "I40E_AQ_RC_ENOTTY"; |
| case I40E_AQ_RC_ENOSPC: |
| return "I40E_AQ_RC_ENOSPC"; |
| case I40E_AQ_RC_ENOSYS: |
| return "I40E_AQ_RC_ENOSYS"; |
| case I40E_AQ_RC_ERANGE: |
| return "I40E_AQ_RC_ERANGE"; |
| case I40E_AQ_RC_EFLUSHED: |
| return "I40E_AQ_RC_EFLUSHED"; |
| case I40E_AQ_RC_BAD_ADDR: |
| return "I40E_AQ_RC_BAD_ADDR"; |
| case I40E_AQ_RC_EMODE: |
| return "I40E_AQ_RC_EMODE"; |
| case I40E_AQ_RC_EFBIG: |
| return "I40E_AQ_RC_EFBIG"; |
| } |
| |
| snprintf(hw->err_str, sizeof(hw->err_str), "%d", aq_err); |
| return hw->err_str; |
| } |
| |
| /** |
| * i40e_stat_str - convert status err code to a string |
| * @hw: pointer to the HW structure |
| * @stat_err: the status error code to convert |
| **/ |
| const char *i40e_stat_str(struct i40e_hw *hw, i40e_status stat_err) |
| { |
| switch (stat_err) { |
| case 0: |
| return "OK"; |
| case I40E_ERR_NVM: |
| return "I40E_ERR_NVM"; |
| case I40E_ERR_NVM_CHECKSUM: |
| return "I40E_ERR_NVM_CHECKSUM"; |
| case I40E_ERR_PHY: |
| return "I40E_ERR_PHY"; |
| case I40E_ERR_CONFIG: |
| return "I40E_ERR_CONFIG"; |
| case I40E_ERR_PARAM: |
| return "I40E_ERR_PARAM"; |
| case I40E_ERR_MAC_TYPE: |
| return "I40E_ERR_MAC_TYPE"; |
| case I40E_ERR_UNKNOWN_PHY: |
| return "I40E_ERR_UNKNOWN_PHY"; |
| case I40E_ERR_LINK_SETUP: |
| return "I40E_ERR_LINK_SETUP"; |
| case I40E_ERR_ADAPTER_STOPPED: |
| return "I40E_ERR_ADAPTER_STOPPED"; |
| case I40E_ERR_INVALID_MAC_ADDR: |
| return "I40E_ERR_INVALID_MAC_ADDR"; |
| case I40E_ERR_DEVICE_NOT_SUPPORTED: |
| return "I40E_ERR_DEVICE_NOT_SUPPORTED"; |
| case I40E_ERR_MASTER_REQUESTS_PENDING: |
| return "I40E_ERR_MASTER_REQUESTS_PENDING"; |
| case I40E_ERR_INVALID_LINK_SETTINGS: |
| return "I40E_ERR_INVALID_LINK_SETTINGS"; |
| case I40E_ERR_AUTONEG_NOT_COMPLETE: |
| return "I40E_ERR_AUTONEG_NOT_COMPLETE"; |
| case I40E_ERR_RESET_FAILED: |
| return "I40E_ERR_RESET_FAILED"; |
| case I40E_ERR_SWFW_SYNC: |
| return "I40E_ERR_SWFW_SYNC"; |
| case I40E_ERR_NO_AVAILABLE_VSI: |
| return "I40E_ERR_NO_AVAILABLE_VSI"; |
| case I40E_ERR_NO_MEMORY: |
| return "I40E_ERR_NO_MEMORY"; |
| case I40E_ERR_BAD_PTR: |
| return "I40E_ERR_BAD_PTR"; |
| case I40E_ERR_RING_FULL: |
| return "I40E_ERR_RING_FULL"; |
| case I40E_ERR_INVALID_PD_ID: |
| return "I40E_ERR_INVALID_PD_ID"; |
| case I40E_ERR_INVALID_QP_ID: |
| return "I40E_ERR_INVALID_QP_ID"; |
| case I40E_ERR_INVALID_CQ_ID: |
| return "I40E_ERR_INVALID_CQ_ID"; |
| case I40E_ERR_INVALID_CEQ_ID: |
| return "I40E_ERR_INVALID_CEQ_ID"; |
| case I40E_ERR_INVALID_AEQ_ID: |
| return "I40E_ERR_INVALID_AEQ_ID"; |
| case I40E_ERR_INVALID_SIZE: |
| return "I40E_ERR_INVALID_SIZE"; |
| case I40E_ERR_INVALID_ARP_INDEX: |
| return "I40E_ERR_INVALID_ARP_INDEX"; |
| case I40E_ERR_INVALID_FPM_FUNC_ID: |
| return "I40E_ERR_INVALID_FPM_FUNC_ID"; |
| case I40E_ERR_QP_INVALID_MSG_SIZE: |
| return "I40E_ERR_QP_INVALID_MSG_SIZE"; |
| case I40E_ERR_QP_TOOMANY_WRS_POSTED: |
| return "I40E_ERR_QP_TOOMANY_WRS_POSTED"; |
| case I40E_ERR_INVALID_FRAG_COUNT: |
| return "I40E_ERR_INVALID_FRAG_COUNT"; |
| case I40E_ERR_QUEUE_EMPTY: |
| return "I40E_ERR_QUEUE_EMPTY"; |
| case I40E_ERR_INVALID_ALIGNMENT: |
| return "I40E_ERR_INVALID_ALIGNMENT"; |
| case I40E_ERR_FLUSHED_QUEUE: |
| return "I40E_ERR_FLUSHED_QUEUE"; |
| case I40E_ERR_INVALID_PUSH_PAGE_INDEX: |
| return "I40E_ERR_INVALID_PUSH_PAGE_INDEX"; |
| case I40E_ERR_INVALID_IMM_DATA_SIZE: |
| return "I40E_ERR_INVALID_IMM_DATA_SIZE"; |
| case I40E_ERR_TIMEOUT: |
| return "I40E_ERR_TIMEOUT"; |
| case I40E_ERR_OPCODE_MISMATCH: |
| return "I40E_ERR_OPCODE_MISMATCH"; |
| case I40E_ERR_CQP_COMPL_ERROR: |
| return "I40E_ERR_CQP_COMPL_ERROR"; |
| case I40E_ERR_INVALID_VF_ID: |
| return "I40E_ERR_INVALID_VF_ID"; |
| case I40E_ERR_INVALID_HMCFN_ID: |
| return "I40E_ERR_INVALID_HMCFN_ID"; |
| case I40E_ERR_BACKING_PAGE_ERROR: |
| return "I40E_ERR_BACKING_PAGE_ERROR"; |
| case I40E_ERR_NO_PBLCHUNKS_AVAILABLE: |
| return "I40E_ERR_NO_PBLCHUNKS_AVAILABLE"; |
| case I40E_ERR_INVALID_PBLE_INDEX: |
| return "I40E_ERR_INVALID_PBLE_INDEX"; |
| case I40E_ERR_INVALID_SD_INDEX: |
| return "I40E_ERR_INVALID_SD_INDEX"; |
| case I40E_ERR_INVALID_PAGE_DESC_INDEX: |
| return "I40E_ERR_INVALID_PAGE_DESC_INDEX"; |
| case I40E_ERR_INVALID_SD_TYPE: |
| return "I40E_ERR_INVALID_SD_TYPE"; |
| case I40E_ERR_MEMCPY_FAILED: |
| return "I40E_ERR_MEMCPY_FAILED"; |
| case I40E_ERR_INVALID_HMC_OBJ_INDEX: |
| return "I40E_ERR_INVALID_HMC_OBJ_INDEX"; |
| case I40E_ERR_INVALID_HMC_OBJ_COUNT: |
| return "I40E_ERR_INVALID_HMC_OBJ_COUNT"; |
| case I40E_ERR_INVALID_SRQ_ARM_LIMIT: |
| return "I40E_ERR_INVALID_SRQ_ARM_LIMIT"; |
| case I40E_ERR_SRQ_ENABLED: |
| return "I40E_ERR_SRQ_ENABLED"; |
| case I40E_ERR_ADMIN_QUEUE_ERROR: |
| return "I40E_ERR_ADMIN_QUEUE_ERROR"; |
| case I40E_ERR_ADMIN_QUEUE_TIMEOUT: |
| return "I40E_ERR_ADMIN_QUEUE_TIMEOUT"; |
| case I40E_ERR_BUF_TOO_SHORT: |
| return "I40E_ERR_BUF_TOO_SHORT"; |
| case I40E_ERR_ADMIN_QUEUE_FULL: |
| return "I40E_ERR_ADMIN_QUEUE_FULL"; |
| case I40E_ERR_ADMIN_QUEUE_NO_WORK: |
| return "I40E_ERR_ADMIN_QUEUE_NO_WORK"; |
| case I40E_ERR_BAD_IWARP_CQE: |
| return "I40E_ERR_BAD_IWARP_CQE"; |
| case I40E_ERR_NVM_BLANK_MODE: |
| return "I40E_ERR_NVM_BLANK_MODE"; |
| case I40E_ERR_NOT_IMPLEMENTED: |
| return "I40E_ERR_NOT_IMPLEMENTED"; |
| case I40E_ERR_PE_DOORBELL_NOT_ENABLED: |
| return "I40E_ERR_PE_DOORBELL_NOT_ENABLED"; |
| case I40E_ERR_DIAG_TEST_FAILED: |
| return "I40E_ERR_DIAG_TEST_FAILED"; |
| case I40E_ERR_NOT_READY: |
| return "I40E_ERR_NOT_READY"; |
| case I40E_NOT_SUPPORTED: |
| return "I40E_NOT_SUPPORTED"; |
| case I40E_ERR_FIRMWARE_API_VERSION: |
| return "I40E_ERR_FIRMWARE_API_VERSION"; |
| case I40E_ERR_ADMIN_QUEUE_CRITICAL_ERROR: |
| return "I40E_ERR_ADMIN_QUEUE_CRITICAL_ERROR"; |
| } |
| |
| snprintf(hw->err_str, sizeof(hw->err_str), "%d", stat_err); |
| return hw->err_str; |
| } |
| |
| /** |
| * i40e_debug_aq |
| * @hw: debug mask related to admin queue |
| * @mask: debug mask |
| * @desc: pointer to admin queue descriptor |
| * @buffer: pointer to command buffer |
| * @buf_len: max length of buffer |
| * |
| * Dumps debug log about adminq command with descriptor contents. |
| **/ |
| void i40e_debug_aq(struct i40e_hw *hw, enum i40e_debug_mask mask, void *desc, |
| void *buffer, u16 buf_len) |
| { |
| struct i40e_aq_desc *aq_desc = (struct i40e_aq_desc *)desc; |
| u32 effective_mask = hw->debug_mask & mask; |
| char prefix[27]; |
| u16 len; |
| u8 *buf = (u8 *)buffer; |
| |
| if (!effective_mask || !desc) |
| return; |
| |
| len = le16_to_cpu(aq_desc->datalen); |
| |
| i40e_debug(hw, mask & I40E_DEBUG_AQ_DESCRIPTOR, |
| "AQ CMD: opcode 0x%04X, flags 0x%04X, datalen 0x%04X, retval 0x%04X\n", |
| le16_to_cpu(aq_desc->opcode), |
| le16_to_cpu(aq_desc->flags), |
| le16_to_cpu(aq_desc->datalen), |
| le16_to_cpu(aq_desc->retval)); |
| i40e_debug(hw, mask & I40E_DEBUG_AQ_DESCRIPTOR, |
| "\tcookie (h,l) 0x%08X 0x%08X\n", |
| le32_to_cpu(aq_desc->cookie_high), |
| le32_to_cpu(aq_desc->cookie_low)); |
| i40e_debug(hw, mask & I40E_DEBUG_AQ_DESCRIPTOR, |
| "\tparam (0,1) 0x%08X 0x%08X\n", |
| le32_to_cpu(aq_desc->params.internal.param0), |
| le32_to_cpu(aq_desc->params.internal.param1)); |
| i40e_debug(hw, mask & I40E_DEBUG_AQ_DESCRIPTOR, |
| "\taddr (h,l) 0x%08X 0x%08X\n", |
| le32_to_cpu(aq_desc->params.external.addr_high), |
| le32_to_cpu(aq_desc->params.external.addr_low)); |
| |
| if (buffer && buf_len != 0 && len != 0 && |
| (effective_mask & I40E_DEBUG_AQ_DESC_BUFFER)) { |
| i40e_debug(hw, mask, "AQ CMD Buffer:\n"); |
| if (buf_len < len) |
| len = buf_len; |
| |
| snprintf(prefix, sizeof(prefix), |
| "i40e %02x:%02x.%x: \t0x", |
| hw->bus.bus_id, |
| hw->bus.device, |
| hw->bus.func); |
| |
| print_hex_dump(KERN_INFO, prefix, DUMP_PREFIX_OFFSET, |
| 16, 1, buf, len, false); |
| } |
| } |
| |
| /** |
| * i40e_check_asq_alive |
| * @hw: pointer to the hw struct |
| * |
| * Returns true if Queue is enabled else false. |
| **/ |
| bool i40e_check_asq_alive(struct i40e_hw *hw) |
| { |
| if (hw->aq.asq.len) |
| return !!(rd32(hw, hw->aq.asq.len) & |
| I40E_PF_ATQLEN_ATQENABLE_MASK); |
| else |
| return false; |
| } |
| |
| /** |
| * i40e_aq_queue_shutdown |
| * @hw: pointer to the hw struct |
| * @unloading: is the driver unloading itself |
| * |
| * Tell the Firmware that we're shutting down the AdminQ and whether |
| * or not the driver is unloading as well. |
| **/ |
| i40e_status i40e_aq_queue_shutdown(struct i40e_hw *hw, |
| bool unloading) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_queue_shutdown *cmd = |
| (struct i40e_aqc_queue_shutdown *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_queue_shutdown); |
| |
| if (unloading) |
| cmd->driver_unloading = cpu_to_le32(I40E_AQ_DRIVER_UNLOADING); |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, NULL); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_set_rss_lut |
| * @hw: pointer to the hardware structure |
| * @vsi_id: vsi fw index |
| * @pf_lut: for PF table set true, for VSI table set false |
| * @lut: pointer to the lut buffer provided by the caller |
| * @lut_size: size of the lut buffer |
| * @set: set true to set the table, false to get the table |
| * |
| * Internal function to get or set RSS look up table |
| **/ |
| static i40e_status i40e_aq_get_set_rss_lut(struct i40e_hw *hw, |
| u16 vsi_id, bool pf_lut, |
| u8 *lut, u16 lut_size, |
| bool set) |
| { |
| i40e_status status; |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_get_set_rss_lut *cmd_resp = |
| (struct i40e_aqc_get_set_rss_lut *)&desc.params.raw; |
| |
| if (set) |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_rss_lut); |
| else |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_get_rss_lut); |
| |
| /* Indirect command */ |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_RD); |
| |
| cmd_resp->vsi_id = |
| cpu_to_le16((u16)((vsi_id << |
| I40E_AQC_SET_RSS_LUT_VSI_ID_SHIFT) & |
| I40E_AQC_SET_RSS_LUT_VSI_ID_MASK)); |
| cmd_resp->vsi_id |= cpu_to_le16((u16)I40E_AQC_SET_RSS_LUT_VSI_VALID); |
| |
| if (pf_lut) |
| cmd_resp->flags |= cpu_to_le16((u16) |
| ((I40E_AQC_SET_RSS_LUT_TABLE_TYPE_PF << |
| I40E_AQC_SET_RSS_LUT_TABLE_TYPE_SHIFT) & |
| I40E_AQC_SET_RSS_LUT_TABLE_TYPE_MASK)); |
| else |
| cmd_resp->flags |= cpu_to_le16((u16) |
| ((I40E_AQC_SET_RSS_LUT_TABLE_TYPE_VSI << |
| I40E_AQC_SET_RSS_LUT_TABLE_TYPE_SHIFT) & |
| I40E_AQC_SET_RSS_LUT_TABLE_TYPE_MASK)); |
| |
| status = i40e_asq_send_command(hw, &desc, lut, lut_size, NULL); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_rss_lut |
| * @hw: pointer to the hardware structure |
| * @vsi_id: vsi fw index |
| * @pf_lut: for PF table set true, for VSI table set false |
| * @lut: pointer to the lut buffer provided by the caller |
| * @lut_size: size of the lut buffer |
| * |
| * get the RSS lookup table, PF or VSI type |
| **/ |
| i40e_status i40e_aq_get_rss_lut(struct i40e_hw *hw, u16 vsi_id, |
| bool pf_lut, u8 *lut, u16 lut_size) |
| { |
| return i40e_aq_get_set_rss_lut(hw, vsi_id, pf_lut, lut, lut_size, |
| false); |
| } |
| |
| /** |
| * i40e_aq_set_rss_lut |
| * @hw: pointer to the hardware structure |
| * @vsi_id: vsi fw index |
| * @pf_lut: for PF table set true, for VSI table set false |
| * @lut: pointer to the lut buffer provided by the caller |
| * @lut_size: size of the lut buffer |
| * |
| * set the RSS lookup table, PF or VSI type |
| **/ |
| i40e_status i40e_aq_set_rss_lut(struct i40e_hw *hw, u16 vsi_id, |
| bool pf_lut, u8 *lut, u16 lut_size) |
| { |
| return i40e_aq_get_set_rss_lut(hw, vsi_id, pf_lut, lut, lut_size, true); |
| } |
| |
| /** |
| * i40e_aq_get_set_rss_key |
| * @hw: pointer to the hw struct |
| * @vsi_id: vsi fw index |
| * @key: pointer to key info struct |
| * @set: set true to set the key, false to get the key |
| * |
| * get the RSS key per VSI |
| **/ |
| static i40e_status i40e_aq_get_set_rss_key(struct i40e_hw *hw, |
| u16 vsi_id, |
| struct i40e_aqc_get_set_rss_key_data *key, |
| bool set) |
| { |
| i40e_status status; |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_get_set_rss_key *cmd_resp = |
| (struct i40e_aqc_get_set_rss_key *)&desc.params.raw; |
| u16 key_size = sizeof(struct i40e_aqc_get_set_rss_key_data); |
| |
| if (set) |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_rss_key); |
| else |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_get_rss_key); |
| |
| /* Indirect command */ |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_RD); |
| |
| cmd_resp->vsi_id = |
| cpu_to_le16((u16)((vsi_id << |
| I40E_AQC_SET_RSS_KEY_VSI_ID_SHIFT) & |
| I40E_AQC_SET_RSS_KEY_VSI_ID_MASK)); |
| cmd_resp->vsi_id |= cpu_to_le16((u16)I40E_AQC_SET_RSS_KEY_VSI_VALID); |
| |
| status = i40e_asq_send_command(hw, &desc, key, key_size, NULL); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_rss_key |
| * @hw: pointer to the hw struct |
| * @vsi_id: vsi fw index |
| * @key: pointer to key info struct |
| * |
| **/ |
| i40e_status i40e_aq_get_rss_key(struct i40e_hw *hw, |
| u16 vsi_id, |
| struct i40e_aqc_get_set_rss_key_data *key) |
| { |
| return i40e_aq_get_set_rss_key(hw, vsi_id, key, false); |
| } |
| |
| /** |
| * i40e_aq_set_rss_key |
| * @hw: pointer to the hw struct |
| * @vsi_id: vsi fw index |
| * @key: pointer to key info struct |
| * |
| * set the RSS key per VSI |
| **/ |
| i40e_status i40e_aq_set_rss_key(struct i40e_hw *hw, |
| u16 vsi_id, |
| struct i40e_aqc_get_set_rss_key_data *key) |
| { |
| return i40e_aq_get_set_rss_key(hw, vsi_id, key, true); |
| } |
| |
| /* The i40e_ptype_lookup table is used to convert from the 8-bit ptype in the |
| * hardware to a bit-field that can be used by SW to more easily determine the |
| * packet type. |
| * |
| * Macros are used to shorten the table lines and make this table human |
| * readable. |
| * |
| * We store the PTYPE in the top byte of the bit field - this is just so that |
| * we can check that the table doesn't have a row missing, as the index into |
| * the table should be the PTYPE. |
| * |
| * Typical work flow: |
| * |
| * IF NOT i40e_ptype_lookup[ptype].known |
| * THEN |
| * Packet is unknown |
| * ELSE IF i40e_ptype_lookup[ptype].outer_ip == I40E_RX_PTYPE_OUTER_IP |
| * Use the rest of the fields to look at the tunnels, inner protocols, etc |
| * ELSE |
| * Use the enum i40e_rx_l2_ptype to decode the packet type |
| * ENDIF |
| */ |
| |
| /* macro to make the table lines short, use explicit indexing with [PTYPE] */ |
| #define I40E_PTT(PTYPE, OUTER_IP, OUTER_IP_VER, OUTER_FRAG, T, TE, TEF, I, PL)\ |
| [PTYPE] = { \ |
| 1, \ |
| I40E_RX_PTYPE_OUTER_##OUTER_IP, \ |
| I40E_RX_PTYPE_OUTER_##OUTER_IP_VER, \ |
| I40E_RX_PTYPE_##OUTER_FRAG, \ |
| I40E_RX_PTYPE_TUNNEL_##T, \ |
| I40E_RX_PTYPE_TUNNEL_END_##TE, \ |
| I40E_RX_PTYPE_##TEF, \ |
| I40E_RX_PTYPE_INNER_PROT_##I, \ |
| I40E_RX_PTYPE_PAYLOAD_LAYER_##PL } |
| |
| #define I40E_PTT_UNUSED_ENTRY(PTYPE) [PTYPE] = { 0, 0, 0, 0, 0, 0, 0, 0, 0 } |
| |
| /* shorter macros makes the table fit but are terse */ |
| #define I40E_RX_PTYPE_NOF I40E_RX_PTYPE_NOT_FRAG |
| #define I40E_RX_PTYPE_FRG I40E_RX_PTYPE_FRAG |
| #define I40E_RX_PTYPE_INNER_PROT_TS I40E_RX_PTYPE_INNER_PROT_TIMESYNC |
| |
| /* Lookup table mapping in the 8-bit HW PTYPE to the bit field for decoding */ |
| struct i40e_rx_ptype_decoded i40e_ptype_lookup[BIT(8)] = { |
| /* L2 Packet types */ |
| I40E_PTT_UNUSED_ENTRY(0), |
| I40E_PTT(1, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2), |
| I40E_PTT(2, L2, NONE, NOF, NONE, NONE, NOF, TS, PAY2), |
| I40E_PTT(3, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2), |
| I40E_PTT_UNUSED_ENTRY(4), |
| I40E_PTT_UNUSED_ENTRY(5), |
| I40E_PTT(6, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2), |
| I40E_PTT(7, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2), |
| I40E_PTT_UNUSED_ENTRY(8), |
| I40E_PTT_UNUSED_ENTRY(9), |
| I40E_PTT(10, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2), |
| I40E_PTT(11, L2, NONE, NOF, NONE, NONE, NOF, NONE, NONE), |
| I40E_PTT(12, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3), |
| I40E_PTT(13, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3), |
| I40E_PTT(14, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3), |
| I40E_PTT(15, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3), |
| I40E_PTT(16, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3), |
| I40E_PTT(17, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3), |
| I40E_PTT(18, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3), |
| I40E_PTT(19, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3), |
| I40E_PTT(20, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3), |
| I40E_PTT(21, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY3), |
| |
| /* Non Tunneled IPv4 */ |
| I40E_PTT(22, IP, IPV4, FRG, NONE, NONE, NOF, NONE, PAY3), |
| I40E_PTT(23, IP, IPV4, NOF, NONE, NONE, NOF, NONE, PAY3), |
| I40E_PTT(24, IP, IPV4, NOF, NONE, NONE, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(25), |
| I40E_PTT(26, IP, IPV4, NOF, NONE, NONE, NOF, TCP, PAY4), |
| I40E_PTT(27, IP, IPV4, NOF, NONE, NONE, NOF, SCTP, PAY4), |
| I40E_PTT(28, IP, IPV4, NOF, NONE, NONE, NOF, ICMP, PAY4), |
| |
| /* IPv4 --> IPv4 */ |
| I40E_PTT(29, IP, IPV4, NOF, IP_IP, IPV4, FRG, NONE, PAY3), |
| I40E_PTT(30, IP, IPV4, NOF, IP_IP, IPV4, NOF, NONE, PAY3), |
| I40E_PTT(31, IP, IPV4, NOF, IP_IP, IPV4, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(32), |
| I40E_PTT(33, IP, IPV4, NOF, IP_IP, IPV4, NOF, TCP, PAY4), |
| I40E_PTT(34, IP, IPV4, NOF, IP_IP, IPV4, NOF, SCTP, PAY4), |
| I40E_PTT(35, IP, IPV4, NOF, IP_IP, IPV4, NOF, ICMP, PAY4), |
| |
| /* IPv4 --> IPv6 */ |
| I40E_PTT(36, IP, IPV4, NOF, IP_IP, IPV6, FRG, NONE, PAY3), |
| I40E_PTT(37, IP, IPV4, NOF, IP_IP, IPV6, NOF, NONE, PAY3), |
| I40E_PTT(38, IP, IPV4, NOF, IP_IP, IPV6, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(39), |
| I40E_PTT(40, IP, IPV4, NOF, IP_IP, IPV6, NOF, TCP, PAY4), |
| I40E_PTT(41, IP, IPV4, NOF, IP_IP, IPV6, NOF, SCTP, PAY4), |
| I40E_PTT(42, IP, IPV4, NOF, IP_IP, IPV6, NOF, ICMP, PAY4), |
| |
| /* IPv4 --> GRE/NAT */ |
| I40E_PTT(43, IP, IPV4, NOF, IP_GRENAT, NONE, NOF, NONE, PAY3), |
| |
| /* IPv4 --> GRE/NAT --> IPv4 */ |
| I40E_PTT(44, IP, IPV4, NOF, IP_GRENAT, IPV4, FRG, NONE, PAY3), |
| I40E_PTT(45, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, NONE, PAY3), |
| I40E_PTT(46, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(47), |
| I40E_PTT(48, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, TCP, PAY4), |
| I40E_PTT(49, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, SCTP, PAY4), |
| I40E_PTT(50, IP, IPV4, NOF, IP_GRENAT, IPV4, NOF, ICMP, PAY4), |
| |
| /* IPv4 --> GRE/NAT --> IPv6 */ |
| I40E_PTT(51, IP, IPV4, NOF, IP_GRENAT, IPV6, FRG, NONE, PAY3), |
| I40E_PTT(52, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, NONE, PAY3), |
| I40E_PTT(53, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(54), |
| I40E_PTT(55, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, TCP, PAY4), |
| I40E_PTT(56, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, SCTP, PAY4), |
| I40E_PTT(57, IP, IPV4, NOF, IP_GRENAT, IPV6, NOF, ICMP, PAY4), |
| |
| /* IPv4 --> GRE/NAT --> MAC */ |
| I40E_PTT(58, IP, IPV4, NOF, IP_GRENAT_MAC, NONE, NOF, NONE, PAY3), |
| |
| /* IPv4 --> GRE/NAT --> MAC --> IPv4 */ |
| I40E_PTT(59, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, FRG, NONE, PAY3), |
| I40E_PTT(60, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, NONE, PAY3), |
| I40E_PTT(61, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(62), |
| I40E_PTT(63, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, TCP, PAY4), |
| I40E_PTT(64, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, SCTP, PAY4), |
| I40E_PTT(65, IP, IPV4, NOF, IP_GRENAT_MAC, IPV4, NOF, ICMP, PAY4), |
| |
| /* IPv4 --> GRE/NAT -> MAC --> IPv6 */ |
| I40E_PTT(66, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, FRG, NONE, PAY3), |
| I40E_PTT(67, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, NONE, PAY3), |
| I40E_PTT(68, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(69), |
| I40E_PTT(70, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, TCP, PAY4), |
| I40E_PTT(71, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, SCTP, PAY4), |
| I40E_PTT(72, IP, IPV4, NOF, IP_GRENAT_MAC, IPV6, NOF, ICMP, PAY4), |
| |
| /* IPv4 --> GRE/NAT --> MAC/VLAN */ |
| I40E_PTT(73, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, NONE, NOF, NONE, PAY3), |
| |
| /* IPv4 ---> GRE/NAT -> MAC/VLAN --> IPv4 */ |
| I40E_PTT(74, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, FRG, NONE, PAY3), |
| I40E_PTT(75, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, NONE, PAY3), |
| I40E_PTT(76, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(77), |
| I40E_PTT(78, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, TCP, PAY4), |
| I40E_PTT(79, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, SCTP, PAY4), |
| I40E_PTT(80, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, ICMP, PAY4), |
| |
| /* IPv4 -> GRE/NAT -> MAC/VLAN --> IPv6 */ |
| I40E_PTT(81, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, FRG, NONE, PAY3), |
| I40E_PTT(82, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, NONE, PAY3), |
| I40E_PTT(83, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(84), |
| I40E_PTT(85, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, TCP, PAY4), |
| I40E_PTT(86, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, SCTP, PAY4), |
| I40E_PTT(87, IP, IPV4, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, ICMP, PAY4), |
| |
| /* Non Tunneled IPv6 */ |
| I40E_PTT(88, IP, IPV6, FRG, NONE, NONE, NOF, NONE, PAY3), |
| I40E_PTT(89, IP, IPV6, NOF, NONE, NONE, NOF, NONE, PAY3), |
| I40E_PTT(90, IP, IPV6, NOF, NONE, NONE, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(91), |
| I40E_PTT(92, IP, IPV6, NOF, NONE, NONE, NOF, TCP, PAY4), |
| I40E_PTT(93, IP, IPV6, NOF, NONE, NONE, NOF, SCTP, PAY4), |
| I40E_PTT(94, IP, IPV6, NOF, NONE, NONE, NOF, ICMP, PAY4), |
| |
| /* IPv6 --> IPv4 */ |
| I40E_PTT(95, IP, IPV6, NOF, IP_IP, IPV4, FRG, NONE, PAY3), |
| I40E_PTT(96, IP, IPV6, NOF, IP_IP, IPV4, NOF, NONE, PAY3), |
| I40E_PTT(97, IP, IPV6, NOF, IP_IP, IPV4, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(98), |
| I40E_PTT(99, IP, IPV6, NOF, IP_IP, IPV4, NOF, TCP, PAY4), |
| I40E_PTT(100, IP, IPV6, NOF, IP_IP, IPV4, NOF, SCTP, PAY4), |
| I40E_PTT(101, IP, IPV6, NOF, IP_IP, IPV4, NOF, ICMP, PAY4), |
| |
| /* IPv6 --> IPv6 */ |
| I40E_PTT(102, IP, IPV6, NOF, IP_IP, IPV6, FRG, NONE, PAY3), |
| I40E_PTT(103, IP, IPV6, NOF, IP_IP, IPV6, NOF, NONE, PAY3), |
| I40E_PTT(104, IP, IPV6, NOF, IP_IP, IPV6, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(105), |
| I40E_PTT(106, IP, IPV6, NOF, IP_IP, IPV6, NOF, TCP, PAY4), |
| I40E_PTT(107, IP, IPV6, NOF, IP_IP, IPV6, NOF, SCTP, PAY4), |
| I40E_PTT(108, IP, IPV6, NOF, IP_IP, IPV6, NOF, ICMP, PAY4), |
| |
| /* IPv6 --> GRE/NAT */ |
| I40E_PTT(109, IP, IPV6, NOF, IP_GRENAT, NONE, NOF, NONE, PAY3), |
| |
| /* IPv6 --> GRE/NAT -> IPv4 */ |
| I40E_PTT(110, IP, IPV6, NOF, IP_GRENAT, IPV4, FRG, NONE, PAY3), |
| I40E_PTT(111, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, NONE, PAY3), |
| I40E_PTT(112, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(113), |
| I40E_PTT(114, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, TCP, PAY4), |
| I40E_PTT(115, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, SCTP, PAY4), |
| I40E_PTT(116, IP, IPV6, NOF, IP_GRENAT, IPV4, NOF, ICMP, PAY4), |
| |
| /* IPv6 --> GRE/NAT -> IPv6 */ |
| I40E_PTT(117, IP, IPV6, NOF, IP_GRENAT, IPV6, FRG, NONE, PAY3), |
| I40E_PTT(118, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, NONE, PAY3), |
| I40E_PTT(119, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(120), |
| I40E_PTT(121, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, TCP, PAY4), |
| I40E_PTT(122, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, SCTP, PAY4), |
| I40E_PTT(123, IP, IPV6, NOF, IP_GRENAT, IPV6, NOF, ICMP, PAY4), |
| |
| /* IPv6 --> GRE/NAT -> MAC */ |
| I40E_PTT(124, IP, IPV6, NOF, IP_GRENAT_MAC, NONE, NOF, NONE, PAY3), |
| |
| /* IPv6 --> GRE/NAT -> MAC -> IPv4 */ |
| I40E_PTT(125, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, FRG, NONE, PAY3), |
| I40E_PTT(126, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, NONE, PAY3), |
| I40E_PTT(127, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(128), |
| I40E_PTT(129, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, TCP, PAY4), |
| I40E_PTT(130, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, SCTP, PAY4), |
| I40E_PTT(131, IP, IPV6, NOF, IP_GRENAT_MAC, IPV4, NOF, ICMP, PAY4), |
| |
| /* IPv6 --> GRE/NAT -> MAC -> IPv6 */ |
| I40E_PTT(132, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, FRG, NONE, PAY3), |
| I40E_PTT(133, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, NONE, PAY3), |
| I40E_PTT(134, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(135), |
| I40E_PTT(136, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, TCP, PAY4), |
| I40E_PTT(137, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, SCTP, PAY4), |
| I40E_PTT(138, IP, IPV6, NOF, IP_GRENAT_MAC, IPV6, NOF, ICMP, PAY4), |
| |
| /* IPv6 --> GRE/NAT -> MAC/VLAN */ |
| I40E_PTT(139, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, NONE, NOF, NONE, PAY3), |
| |
| /* IPv6 --> GRE/NAT -> MAC/VLAN --> IPv4 */ |
| I40E_PTT(140, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, FRG, NONE, PAY3), |
| I40E_PTT(141, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, NONE, PAY3), |
| I40E_PTT(142, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(143), |
| I40E_PTT(144, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, TCP, PAY4), |
| I40E_PTT(145, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, SCTP, PAY4), |
| I40E_PTT(146, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV4, NOF, ICMP, PAY4), |
| |
| /* IPv6 --> GRE/NAT -> MAC/VLAN --> IPv6 */ |
| I40E_PTT(147, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, FRG, NONE, PAY3), |
| I40E_PTT(148, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, NONE, PAY3), |
| I40E_PTT(149, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, UDP, PAY4), |
| I40E_PTT_UNUSED_ENTRY(150), |
| I40E_PTT(151, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, TCP, PAY4), |
| I40E_PTT(152, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, SCTP, PAY4), |
| I40E_PTT(153, IP, IPV6, NOF, IP_GRENAT_MAC_VLAN, IPV6, NOF, ICMP, PAY4), |
| |
| /* unused entries */ |
| [154 ... 255] = { 0, 0, 0, 0, 0, 0, 0, 0, 0 } |
| }; |
| |
| /** |
| * i40e_init_shared_code - Initialize the shared code |
| * @hw: pointer to hardware structure |
| * |
| * This assigns the MAC type and PHY code and inits the NVM. |
| * Does not touch the hardware. This function must be called prior to any |
| * other function in the shared code. The i40e_hw structure should be |
| * memset to 0 prior to calling this function. The following fields in |
| * hw structure should be filled in prior to calling this function: |
| * hw_addr, back, device_id, vendor_id, subsystem_device_id, |
| * subsystem_vendor_id, and revision_id |
| **/ |
| i40e_status i40e_init_shared_code(struct i40e_hw *hw) |
| { |
| i40e_status status = 0; |
| u32 port, ari, func_rid; |
| |
| i40e_set_mac_type(hw); |
| |
| switch (hw->mac.type) { |
| case I40E_MAC_XL710: |
| case I40E_MAC_X722: |
| break; |
| default: |
| return I40E_ERR_DEVICE_NOT_SUPPORTED; |
| } |
| |
| hw->phy.get_link_info = true; |
| |
| /* Determine port number and PF number*/ |
| port = (rd32(hw, I40E_PFGEN_PORTNUM) & I40E_PFGEN_PORTNUM_PORT_NUM_MASK) |
| >> I40E_PFGEN_PORTNUM_PORT_NUM_SHIFT; |
| hw->port = (u8)port; |
| ari = (rd32(hw, I40E_GLPCI_CAPSUP) & I40E_GLPCI_CAPSUP_ARI_EN_MASK) >> |
| I40E_GLPCI_CAPSUP_ARI_EN_SHIFT; |
| func_rid = rd32(hw, I40E_PF_FUNC_RID); |
| if (ari) |
| hw->pf_id = (u8)(func_rid & 0xff); |
| else |
| hw->pf_id = (u8)(func_rid & 0x7); |
| |
| status = i40e_init_nvm(hw); |
| return status; |
| } |
| |
| /** |
| * i40e_aq_mac_address_read - Retrieve the MAC addresses |
| * @hw: pointer to the hw struct |
| * @flags: a return indicator of what addresses were added to the addr store |
| * @addrs: the requestor's mac addr store |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| static i40e_status i40e_aq_mac_address_read(struct i40e_hw *hw, |
| u16 *flags, |
| struct i40e_aqc_mac_address_read_data *addrs, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_mac_address_read *cmd_data = |
| (struct i40e_aqc_mac_address_read *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_mac_address_read); |
| desc.flags |= cpu_to_le16(I40E_AQ_FLAG_BUF); |
| |
| status = i40e_asq_send_command(hw, &desc, addrs, |
| sizeof(*addrs), cmd_details); |
| *flags = le16_to_cpu(cmd_data->command_flags); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_mac_address_write - Change the MAC addresses |
| * @hw: pointer to the hw struct |
| * @flags: indicates which MAC to be written |
| * @mac_addr: address to write |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_mac_address_write(struct i40e_hw *hw, |
| u16 flags, u8 *mac_addr, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_mac_address_write *cmd_data = |
| (struct i40e_aqc_mac_address_write *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_mac_address_write); |
| cmd_data->command_flags = cpu_to_le16(flags); |
| cmd_data->mac_sah = cpu_to_le16((u16)mac_addr[0] << 8 | mac_addr[1]); |
| cmd_data->mac_sal = cpu_to_le32(((u32)mac_addr[2] << 24) | |
| ((u32)mac_addr[3] << 16) | |
| ((u32)mac_addr[4] << 8) | |
| mac_addr[5]); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_get_mac_addr - get MAC address |
| * @hw: pointer to the HW structure |
| * @mac_addr: pointer to MAC address |
| * |
| * Reads the adapter's MAC address from register |
| **/ |
| i40e_status i40e_get_mac_addr(struct i40e_hw *hw, u8 *mac_addr) |
| { |
| struct i40e_aqc_mac_address_read_data addrs; |
| i40e_status status; |
| u16 flags = 0; |
| |
| status = i40e_aq_mac_address_read(hw, &flags, &addrs, NULL); |
| |
| if (flags & I40E_AQC_LAN_ADDR_VALID) |
| ether_addr_copy(mac_addr, addrs.pf_lan_mac); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_get_port_mac_addr - get Port MAC address |
| * @hw: pointer to the HW structure |
| * @mac_addr: pointer to Port MAC address |
| * |
| * Reads the adapter's Port MAC address |
| **/ |
| i40e_status i40e_get_port_mac_addr(struct i40e_hw *hw, u8 *mac_addr) |
| { |
| struct i40e_aqc_mac_address_read_data addrs; |
| i40e_status status; |
| u16 flags = 0; |
| |
| status = i40e_aq_mac_address_read(hw, &flags, &addrs, NULL); |
| if (status) |
| return status; |
| |
| if (flags & I40E_AQC_PORT_ADDR_VALID) |
| ether_addr_copy(mac_addr, addrs.port_mac); |
| else |
| status = I40E_ERR_INVALID_MAC_ADDR; |
| |
| return status; |
| } |
| |
| /** |
| * i40e_pre_tx_queue_cfg - pre tx queue configure |
| * @hw: pointer to the HW structure |
| * @queue: target PF queue index |
| * @enable: state change request |
| * |
| * Handles hw requirement to indicate intention to enable |
| * or disable target queue. |
| **/ |
| void i40e_pre_tx_queue_cfg(struct i40e_hw *hw, u32 queue, bool enable) |
| { |
| u32 abs_queue_idx = hw->func_caps.base_queue + queue; |
| u32 reg_block = 0; |
| u32 reg_val; |
| |
| if (abs_queue_idx >= 128) { |
| reg_block = abs_queue_idx / 128; |
| abs_queue_idx %= 128; |
| } |
| |
| reg_val = rd32(hw, I40E_GLLAN_TXPRE_QDIS(reg_block)); |
| reg_val &= ~I40E_GLLAN_TXPRE_QDIS_QINDX_MASK; |
| reg_val |= (abs_queue_idx << I40E_GLLAN_TXPRE_QDIS_QINDX_SHIFT); |
| |
| if (enable) |
| reg_val |= I40E_GLLAN_TXPRE_QDIS_CLEAR_QDIS_MASK; |
| else |
| reg_val |= I40E_GLLAN_TXPRE_QDIS_SET_QDIS_MASK; |
| |
| wr32(hw, I40E_GLLAN_TXPRE_QDIS(reg_block), reg_val); |
| } |
| |
| /** |
| * i40e_read_pba_string - Reads part number string from EEPROM |
| * @hw: pointer to hardware structure |
| * @pba_num: stores the part number string from the EEPROM |
| * @pba_num_size: part number string buffer length |
| * |
| * Reads the part number string from the EEPROM. |
| **/ |
| i40e_status i40e_read_pba_string(struct i40e_hw *hw, u8 *pba_num, |
| u32 pba_num_size) |
| { |
| i40e_status status = 0; |
| u16 pba_word = 0; |
| u16 pba_size = 0; |
| u16 pba_ptr = 0; |
| u16 i = 0; |
| |
| status = i40e_read_nvm_word(hw, I40E_SR_PBA_FLAGS, &pba_word); |
| if (status || (pba_word != 0xFAFA)) { |
| hw_dbg(hw, "Failed to read PBA flags or flag is invalid.\n"); |
| return status; |
| } |
| |
| status = i40e_read_nvm_word(hw, I40E_SR_PBA_BLOCK_PTR, &pba_ptr); |
| if (status) { |
| hw_dbg(hw, "Failed to read PBA Block pointer.\n"); |
| return status; |
| } |
| |
| status = i40e_read_nvm_word(hw, pba_ptr, &pba_size); |
| if (status) { |
| hw_dbg(hw, "Failed to read PBA Block size.\n"); |
| return status; |
| } |
| |
| /* Subtract one to get PBA word count (PBA Size word is included in |
| * total size) |
| */ |
| pba_size--; |
| if (pba_num_size < (((u32)pba_size * 2) + 1)) { |
| hw_dbg(hw, "Buffer too small for PBA data.\n"); |
| return I40E_ERR_PARAM; |
| } |
| |
| for (i = 0; i < pba_size; i++) { |
| status = i40e_read_nvm_word(hw, (pba_ptr + 1) + i, &pba_word); |
| if (status) { |
| hw_dbg(hw, "Failed to read PBA Block word %d.\n", i); |
| return status; |
| } |
| |
| pba_num[(i * 2)] = (pba_word >> 8) & 0xFF; |
| pba_num[(i * 2) + 1] = pba_word & 0xFF; |
| } |
| pba_num[(pba_size * 2)] = '\0'; |
| |
| return status; |
| } |
| |
| /** |
| * i40e_get_media_type - Gets media type |
| * @hw: pointer to the hardware structure |
| **/ |
| static enum i40e_media_type i40e_get_media_type(struct i40e_hw *hw) |
| { |
| enum i40e_media_type media; |
| |
| switch (hw->phy.link_info.phy_type) { |
| case I40E_PHY_TYPE_10GBASE_SR: |
| case I40E_PHY_TYPE_10GBASE_LR: |
| case I40E_PHY_TYPE_1000BASE_SX: |
| case I40E_PHY_TYPE_1000BASE_LX: |
| case I40E_PHY_TYPE_40GBASE_SR4: |
| case I40E_PHY_TYPE_40GBASE_LR4: |
| case I40E_PHY_TYPE_25GBASE_LR: |
| case I40E_PHY_TYPE_25GBASE_SR: |
| media = I40E_MEDIA_TYPE_FIBER; |
| break; |
| case I40E_PHY_TYPE_100BASE_TX: |
| case I40E_PHY_TYPE_1000BASE_T: |
| case I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS: |
| case I40E_PHY_TYPE_5GBASE_T_LINK_STATUS: |
| case I40E_PHY_TYPE_10GBASE_T: |
| media = I40E_MEDIA_TYPE_BASET; |
| break; |
| case I40E_PHY_TYPE_10GBASE_CR1_CU: |
| case I40E_PHY_TYPE_40GBASE_CR4_CU: |
| case I40E_PHY_TYPE_10GBASE_CR1: |
| case I40E_PHY_TYPE_40GBASE_CR4: |
| case I40E_PHY_TYPE_10GBASE_SFPP_CU: |
| case I40E_PHY_TYPE_40GBASE_AOC: |
| case I40E_PHY_TYPE_10GBASE_AOC: |
| case I40E_PHY_TYPE_25GBASE_CR: |
| case I40E_PHY_TYPE_25GBASE_AOC: |
| case I40E_PHY_TYPE_25GBASE_ACC: |
| media = I40E_MEDIA_TYPE_DA; |
| break; |
| case I40E_PHY_TYPE_1000BASE_KX: |
| case I40E_PHY_TYPE_10GBASE_KX4: |
| case I40E_PHY_TYPE_10GBASE_KR: |
| case I40E_PHY_TYPE_40GBASE_KR4: |
| case I40E_PHY_TYPE_20GBASE_KR2: |
| case I40E_PHY_TYPE_25GBASE_KR: |
| media = I40E_MEDIA_TYPE_BACKPLANE; |
| break; |
| case I40E_PHY_TYPE_SGMII: |
| case I40E_PHY_TYPE_XAUI: |
| case I40E_PHY_TYPE_XFI: |
| case I40E_PHY_TYPE_XLAUI: |
| case I40E_PHY_TYPE_XLPPI: |
| default: |
| media = I40E_MEDIA_TYPE_UNKNOWN; |
| break; |
| } |
| |
| return media; |
| } |
| |
| /** |
| * i40e_poll_globr - Poll for Global Reset completion |
| * @hw: pointer to the hardware structure |
| * @retry_limit: how many times to retry before failure |
| **/ |
| static i40e_status i40e_poll_globr(struct i40e_hw *hw, |
| u32 retry_limit) |
| { |
| u32 cnt, reg = 0; |
| |
| for (cnt = 0; cnt < retry_limit; cnt++) { |
| reg = rd32(hw, I40E_GLGEN_RSTAT); |
| if (!(reg & I40E_GLGEN_RSTAT_DEVSTATE_MASK)) |
| return 0; |
| msleep(100); |
| } |
| |
| hw_dbg(hw, "Global reset failed.\n"); |
| hw_dbg(hw, "I40E_GLGEN_RSTAT = 0x%x\n", reg); |
| |
| return I40E_ERR_RESET_FAILED; |
| } |
| |
| #define I40E_PF_RESET_WAIT_COUNT_A0 200 |
| #define I40E_PF_RESET_WAIT_COUNT 200 |
| /** |
| * i40e_pf_reset - Reset the PF |
| * @hw: pointer to the hardware structure |
| * |
| * Assuming someone else has triggered a global reset, |
| * assure the global reset is complete and then reset the PF |
| **/ |
| i40e_status i40e_pf_reset(struct i40e_hw *hw) |
| { |
| u32 cnt = 0; |
| u32 cnt1 = 0; |
| u32 reg = 0; |
| u32 grst_del; |
| |
| /* Poll for Global Reset steady state in case of recent GRST. |
| * The grst delay value is in 100ms units, and we'll wait a |
| * couple counts longer to be sure we don't just miss the end. |
| */ |
| grst_del = (rd32(hw, I40E_GLGEN_RSTCTL) & |
| I40E_GLGEN_RSTCTL_GRSTDEL_MASK) >> |
| I40E_GLGEN_RSTCTL_GRSTDEL_SHIFT; |
| |
| /* It can take upto 15 secs for GRST steady state. |
| * Bump it to 16 secs max to be safe. |
| */ |
| grst_del = grst_del * 20; |
| |
| for (cnt = 0; cnt < grst_del; cnt++) { |
| reg = rd32(hw, I40E_GLGEN_RSTAT); |
| if (!(reg & I40E_GLGEN_RSTAT_DEVSTATE_MASK)) |
| break; |
| msleep(100); |
| } |
| if (reg & I40E_GLGEN_RSTAT_DEVSTATE_MASK) { |
| hw_dbg(hw, "Global reset polling failed to complete.\n"); |
| return I40E_ERR_RESET_FAILED; |
| } |
| |
| /* Now Wait for the FW to be ready */ |
| for (cnt1 = 0; cnt1 < I40E_PF_RESET_WAIT_COUNT; cnt1++) { |
| reg = rd32(hw, I40E_GLNVM_ULD); |
| reg &= (I40E_GLNVM_ULD_CONF_CORE_DONE_MASK | |
| I40E_GLNVM_ULD_CONF_GLOBAL_DONE_MASK); |
| if (reg == (I40E_GLNVM_ULD_CONF_CORE_DONE_MASK | |
| I40E_GLNVM_ULD_CONF_GLOBAL_DONE_MASK)) { |
| hw_dbg(hw, "Core and Global modules ready %d\n", cnt1); |
| break; |
| } |
| usleep_range(10000, 20000); |
| } |
| if (!(reg & (I40E_GLNVM_ULD_CONF_CORE_DONE_MASK | |
| I40E_GLNVM_ULD_CONF_GLOBAL_DONE_MASK))) { |
| hw_dbg(hw, "wait for FW Reset complete timedout\n"); |
| hw_dbg(hw, "I40E_GLNVM_ULD = 0x%x\n", reg); |
| return I40E_ERR_RESET_FAILED; |
| } |
| |
| /* If there was a Global Reset in progress when we got here, |
| * we don't need to do the PF Reset |
| */ |
| if (!cnt) { |
| u32 reg2 = 0; |
| if (hw->revision_id == 0) |
| cnt = I40E_PF_RESET_WAIT_COUNT_A0; |
| else |
| cnt = I40E_PF_RESET_WAIT_COUNT; |
| reg = rd32(hw, I40E_PFGEN_CTRL); |
| wr32(hw, I40E_PFGEN_CTRL, |
| (reg | I40E_PFGEN_CTRL_PFSWR_MASK)); |
| for (; cnt; cnt--) { |
| reg = rd32(hw, I40E_PFGEN_CTRL); |
| if (!(reg & I40E_PFGEN_CTRL_PFSWR_MASK)) |
| break; |
| reg2 = rd32(hw, I40E_GLGEN_RSTAT); |
| if (reg2 & I40E_GLGEN_RSTAT_DEVSTATE_MASK) |
| break; |
| usleep_range(1000, 2000); |
| } |
| if (reg2 & I40E_GLGEN_RSTAT_DEVSTATE_MASK) { |
| if (i40e_poll_globr(hw, grst_del)) |
| return I40E_ERR_RESET_FAILED; |
| } else if (reg & I40E_PFGEN_CTRL_PFSWR_MASK) { |
| hw_dbg(hw, "PF reset polling failed to complete.\n"); |
| return I40E_ERR_RESET_FAILED; |
| } |
| } |
| |
| i40e_clear_pxe_mode(hw); |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_clear_hw - clear out any left over hw state |
| * @hw: pointer to the hw struct |
| * |
| * Clear queues and interrupts, typically called at init time, |
| * but after the capabilities have been found so we know how many |
| * queues and msix vectors have been allocated. |
| **/ |
| void i40e_clear_hw(struct i40e_hw *hw) |
| { |
| u32 num_queues, base_queue; |
| u32 num_pf_int; |
| u32 num_vf_int; |
| u32 num_vfs; |
| u32 i, j; |
| u32 val; |
| u32 eol = 0x7ff; |
| |
| /* get number of interrupts, queues, and VFs */ |
| val = rd32(hw, I40E_GLPCI_CNF2); |
| num_pf_int = (val & I40E_GLPCI_CNF2_MSI_X_PF_N_MASK) >> |
| I40E_GLPCI_CNF2_MSI_X_PF_N_SHIFT; |
| num_vf_int = (val & I40E_GLPCI_CNF2_MSI_X_VF_N_MASK) >> |
| I40E_GLPCI_CNF2_MSI_X_VF_N_SHIFT; |
| |
| val = rd32(hw, I40E_PFLAN_QALLOC); |
| base_queue = (val & I40E_PFLAN_QALLOC_FIRSTQ_MASK) >> |
| I40E_PFLAN_QALLOC_FIRSTQ_SHIFT; |
| j = (val & I40E_PFLAN_QALLOC_LASTQ_MASK) >> |
| I40E_PFLAN_QALLOC_LASTQ_SHIFT; |
| if (val & I40E_PFLAN_QALLOC_VALID_MASK) |
| num_queues = (j - base_queue) + 1; |
| else |
| num_queues = 0; |
| |
| val = rd32(hw, I40E_PF_VT_PFALLOC); |
| i = (val & I40E_PF_VT_PFALLOC_FIRSTVF_MASK) >> |
| I40E_PF_VT_PFALLOC_FIRSTVF_SHIFT; |
| j = (val & I40E_PF_VT_PFALLOC_LASTVF_MASK) >> |
| I40E_PF_VT_PFALLOC_LASTVF_SHIFT; |
| if (val & I40E_PF_VT_PFALLOC_VALID_MASK) |
| num_vfs = (j - i) + 1; |
| else |
| num_vfs = 0; |
| |
| /* stop all the interrupts */ |
| wr32(hw, I40E_PFINT_ICR0_ENA, 0); |
| val = 0x3 << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT; |
| for (i = 0; i < num_pf_int - 2; i++) |
| wr32(hw, I40E_PFINT_DYN_CTLN(i), val); |
| |
| /* Set the FIRSTQ_INDX field to 0x7FF in PFINT_LNKLSTx */ |
| val = eol << I40E_PFINT_LNKLST0_FIRSTQ_INDX_SHIFT; |
| wr32(hw, I40E_PFINT_LNKLST0, val); |
| for (i = 0; i < num_pf_int - 2; i++) |
| wr32(hw, I40E_PFINT_LNKLSTN(i), val); |
| val = eol << I40E_VPINT_LNKLST0_FIRSTQ_INDX_SHIFT; |
| for (i = 0; i < num_vfs; i++) |
| wr32(hw, I40E_VPINT_LNKLST0(i), val); |
| for (i = 0; i < num_vf_int - 2; i++) |
| wr32(hw, I40E_VPINT_LNKLSTN(i), val); |
| |
| /* warn the HW of the coming Tx disables */ |
| for (i = 0; i < num_queues; i++) { |
| u32 abs_queue_idx = base_queue + i; |
| u32 reg_block = 0; |
| |
| if (abs_queue_idx >= 128) { |
| reg_block = abs_queue_idx / 128; |
| abs_queue_idx %= 128; |
| } |
| |
| val = rd32(hw, I40E_GLLAN_TXPRE_QDIS(reg_block)); |
| val &= ~I40E_GLLAN_TXPRE_QDIS_QINDX_MASK; |
| val |= (abs_queue_idx << I40E_GLLAN_TXPRE_QDIS_QINDX_SHIFT); |
| val |= I40E_GLLAN_TXPRE_QDIS_SET_QDIS_MASK; |
| |
| wr32(hw, I40E_GLLAN_TXPRE_QDIS(reg_block), val); |
| } |
| udelay(400); |
| |
| /* stop all the queues */ |
| for (i = 0; i < num_queues; i++) { |
| wr32(hw, I40E_QINT_TQCTL(i), 0); |
| wr32(hw, I40E_QTX_ENA(i), 0); |
| wr32(hw, I40E_QINT_RQCTL(i), 0); |
| wr32(hw, I40E_QRX_ENA(i), 0); |
| } |
| |
| /* short wait for all queue disables to settle */ |
| udelay(50); |
| } |
| |
| /** |
| * i40e_clear_pxe_mode - clear pxe operations mode |
| * @hw: pointer to the hw struct |
| * |
| * Make sure all PXE mode settings are cleared, including things |
| * like descriptor fetch/write-back mode. |
| **/ |
| void i40e_clear_pxe_mode(struct i40e_hw *hw) |
| { |
| u32 reg; |
| |
| if (i40e_check_asq_alive(hw)) |
| i40e_aq_clear_pxe_mode(hw, NULL); |
| |
| /* Clear single descriptor fetch/write-back mode */ |
| reg = rd32(hw, I40E_GLLAN_RCTL_0); |
| |
| if (hw->revision_id == 0) { |
| /* As a work around clear PXE_MODE instead of setting it */ |
| wr32(hw, I40E_GLLAN_RCTL_0, (reg & (~I40E_GLLAN_RCTL_0_PXE_MODE_MASK))); |
| } else { |
| wr32(hw, I40E_GLLAN_RCTL_0, (reg | I40E_GLLAN_RCTL_0_PXE_MODE_MASK)); |
| } |
| } |
| |
| /** |
| * i40e_led_is_mine - helper to find matching led |
| * @hw: pointer to the hw struct |
| * @idx: index into GPIO registers |
| * |
| * returns: 0 if no match, otherwise the value of the GPIO_CTL register |
| */ |
| static u32 i40e_led_is_mine(struct i40e_hw *hw, int idx) |
| { |
| u32 gpio_val = 0; |
| u32 port; |
| |
| if (!I40E_IS_X710TL_DEVICE(hw->device_id) && |
| !hw->func_caps.led[idx]) |
| return 0; |
| gpio_val = rd32(hw, I40E_GLGEN_GPIO_CTL(idx)); |
| port = (gpio_val & I40E_GLGEN_GPIO_CTL_PRT_NUM_MASK) >> |
| I40E_GLGEN_GPIO_CTL_PRT_NUM_SHIFT; |
| |
| /* if PRT_NUM_NA is 1 then this LED is not port specific, OR |
| * if it is not our port then ignore |
| */ |
| if ((gpio_val & I40E_GLGEN_GPIO_CTL_PRT_NUM_NA_MASK) || |
| (port != hw->port)) |
| return 0; |
| |
| return gpio_val; |
| } |
| |
| #define I40E_FW_LED BIT(4) |
| #define I40E_LED_MODE_VALID (I40E_GLGEN_GPIO_CTL_LED_MODE_MASK >> \ |
| I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT) |
| |
| #define I40E_LED0 22 |
| |
| #define I40E_PIN_FUNC_SDP 0x0 |
| #define I40E_PIN_FUNC_LED 0x1 |
| |
| /** |
| * i40e_led_get - return current on/off mode |
| * @hw: pointer to the hw struct |
| * |
| * The value returned is the 'mode' field as defined in the |
| * GPIO register definitions: 0x0 = off, 0xf = on, and other |
| * values are variations of possible behaviors relating to |
| * blink, link, and wire. |
| **/ |
| u32 i40e_led_get(struct i40e_hw *hw) |
| { |
| u32 mode = 0; |
| int i; |
| |
| /* as per the documentation GPIO 22-29 are the LED |
| * GPIO pins named LED0..LED7 |
| */ |
| for (i = I40E_LED0; i <= I40E_GLGEN_GPIO_CTL_MAX_INDEX; i++) { |
| u32 gpio_val = i40e_led_is_mine(hw, i); |
| |
| if (!gpio_val) |
| continue; |
| |
| mode = (gpio_val & I40E_GLGEN_GPIO_CTL_LED_MODE_MASK) >> |
| I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT; |
| break; |
| } |
| |
| return mode; |
| } |
| |
| /** |
| * i40e_led_set - set new on/off mode |
| * @hw: pointer to the hw struct |
| * @mode: 0=off, 0xf=on (else see manual for mode details) |
| * @blink: true if the LED should blink when on, false if steady |
| * |
| * if this function is used to turn on the blink it should |
| * be used to disable the blink when restoring the original state. |
| **/ |
| void i40e_led_set(struct i40e_hw *hw, u32 mode, bool blink) |
| { |
| int i; |
| |
| if (mode & ~I40E_LED_MODE_VALID) { |
| hw_dbg(hw, "invalid mode passed in %X\n", mode); |
| return; |
| } |
| |
| /* as per the documentation GPIO 22-29 are the LED |
| * GPIO pins named LED0..LED7 |
| */ |
| for (i = I40E_LED0; i <= I40E_GLGEN_GPIO_CTL_MAX_INDEX; i++) { |
| u32 gpio_val = i40e_led_is_mine(hw, i); |
| |
| if (!gpio_val) |
| continue; |
| |
| if (I40E_IS_X710TL_DEVICE(hw->device_id)) { |
| u32 pin_func = 0; |
| |
| if (mode & I40E_FW_LED) |
| pin_func = I40E_PIN_FUNC_SDP; |
| else |
| pin_func = I40E_PIN_FUNC_LED; |
| |
| gpio_val &= ~I40E_GLGEN_GPIO_CTL_PIN_FUNC_MASK; |
| gpio_val |= ((pin_func << |
| I40E_GLGEN_GPIO_CTL_PIN_FUNC_SHIFT) & |
| I40E_GLGEN_GPIO_CTL_PIN_FUNC_MASK); |
| } |
| gpio_val &= ~I40E_GLGEN_GPIO_CTL_LED_MODE_MASK; |
| /* this & is a bit of paranoia, but serves as a range check */ |
| gpio_val |= ((mode << I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT) & |
| I40E_GLGEN_GPIO_CTL_LED_MODE_MASK); |
| |
| if (blink) |
| gpio_val |= BIT(I40E_GLGEN_GPIO_CTL_LED_BLINK_SHIFT); |
| else |
| gpio_val &= ~BIT(I40E_GLGEN_GPIO_CTL_LED_BLINK_SHIFT); |
| |
| wr32(hw, I40E_GLGEN_GPIO_CTL(i), gpio_val); |
| break; |
| } |
| } |
| |
| /* Admin command wrappers */ |
| |
| /** |
| * i40e_aq_get_phy_capabilities |
| * @hw: pointer to the hw struct |
| * @abilities: structure for PHY capabilities to be filled |
| * @qualified_modules: report Qualified Modules |
| * @report_init: report init capabilities (active are default) |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Returns the various PHY abilities supported on the Port. |
| **/ |
| i40e_status i40e_aq_get_phy_capabilities(struct i40e_hw *hw, |
| bool qualified_modules, bool report_init, |
| struct i40e_aq_get_phy_abilities_resp *abilities, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| i40e_status status; |
| u16 abilities_size = sizeof(struct i40e_aq_get_phy_abilities_resp); |
| u16 max_delay = I40E_MAX_PHY_TIMEOUT, total_delay = 0; |
| |
| if (!abilities) |
| return I40E_ERR_PARAM; |
| |
| do { |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_get_phy_abilities); |
| |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (abilities_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| if (qualified_modules) |
| desc.params.external.param0 |= |
| cpu_to_le32(I40E_AQ_PHY_REPORT_QUALIFIED_MODULES); |
| |
| if (report_init) |
| desc.params.external.param0 |= |
| cpu_to_le32(I40E_AQ_PHY_REPORT_INITIAL_VALUES); |
| |
| status = i40e_asq_send_command(hw, &desc, abilities, |
| abilities_size, cmd_details); |
| |
| switch (hw->aq.asq_last_status) { |
| case I40E_AQ_RC_EIO: |
| status = I40E_ERR_UNKNOWN_PHY; |
| break; |
| case I40E_AQ_RC_EAGAIN: |
| usleep_range(1000, 2000); |
| total_delay++; |
| status = I40E_ERR_TIMEOUT; |
| break; |
| /* also covers I40E_AQ_RC_OK */ |
| default: |
| break; |
| } |
| |
| } while ((hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN) && |
| (total_delay < max_delay)); |
| |
| if (status) |
| return status; |
| |
| if (report_init) { |
| if (hw->mac.type == I40E_MAC_XL710 && |
| hw->aq.api_maj_ver == I40E_FW_API_VERSION_MAJOR && |
| hw->aq.api_min_ver >= I40E_MINOR_VER_GET_LINK_INFO_XL710) { |
| status = i40e_aq_get_link_info(hw, true, NULL, NULL); |
| } else { |
| hw->phy.phy_types = le32_to_cpu(abilities->phy_type); |
| hw->phy.phy_types |= |
| ((u64)abilities->phy_type_ext << 32); |
| } |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_phy_config |
| * @hw: pointer to the hw struct |
| * @config: structure with PHY configuration to be set |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Set the various PHY configuration parameters |
| * supported on the Port.One or more of the Set PHY config parameters may be |
| * ignored in an MFP mode as the PF may not have the privilege to set some |
| * of the PHY Config parameters. This status will be indicated by the |
| * command response. |
| **/ |
| enum i40e_status_code i40e_aq_set_phy_config(struct i40e_hw *hw, |
| struct i40e_aq_set_phy_config *config, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aq_set_phy_config *cmd = |
| (struct i40e_aq_set_phy_config *)&desc.params.raw; |
| enum i40e_status_code status; |
| |
| if (!config) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_phy_config); |
| |
| *cmd = *config; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| static noinline_for_stack enum i40e_status_code |
| i40e_set_fc_status(struct i40e_hw *hw, |
| struct i40e_aq_get_phy_abilities_resp *abilities, |
| bool atomic_restart) |
| { |
| struct i40e_aq_set_phy_config config; |
| enum i40e_fc_mode fc_mode = hw->fc.requested_mode; |
| u8 pause_mask = 0x0; |
| |
| switch (fc_mode) { |
| case I40E_FC_FULL: |
| pause_mask |= I40E_AQ_PHY_FLAG_PAUSE_TX; |
| pause_mask |= I40E_AQ_PHY_FLAG_PAUSE_RX; |
| break; |
| case I40E_FC_RX_PAUSE: |
| pause_mask |= I40E_AQ_PHY_FLAG_PAUSE_RX; |
| break; |
| case I40E_FC_TX_PAUSE: |
| pause_mask |= I40E_AQ_PHY_FLAG_PAUSE_TX; |
| break; |
| default: |
| break; |
| } |
| |
| memset(&config, 0, sizeof(struct i40e_aq_set_phy_config)); |
| /* clear the old pause settings */ |
| config.abilities = abilities->abilities & ~(I40E_AQ_PHY_FLAG_PAUSE_TX) & |
| ~(I40E_AQ_PHY_FLAG_PAUSE_RX); |
| /* set the new abilities */ |
| config.abilities |= pause_mask; |
| /* If the abilities have changed, then set the new config */ |
| if (config.abilities == abilities->abilities) |
| return 0; |
| |
| /* Auto restart link so settings take effect */ |
| if (atomic_restart) |
| config.abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK; |
| /* Copy over all the old settings */ |
| config.phy_type = abilities->phy_type; |
| config.phy_type_ext = abilities->phy_type_ext; |
| config.link_speed = abilities->link_speed; |
| config.eee_capability = abilities->eee_capability; |
| config.eeer = abilities->eeer_val; |
| config.low_power_ctrl = abilities->d3_lpan; |
| config.fec_config = abilities->fec_cfg_curr_mod_ext_info & |
| I40E_AQ_PHY_FEC_CONFIG_MASK; |
| |
| return i40e_aq_set_phy_config(hw, &config, NULL); |
| } |
| |
| /** |
| * i40e_set_fc |
| * @hw: pointer to the hw struct |
| * @aq_failures: buffer to return AdminQ failure information |
| * @atomic_restart: whether to enable atomic link restart |
| * |
| * Set the requested flow control mode using set_phy_config. |
| **/ |
| enum i40e_status_code i40e_set_fc(struct i40e_hw *hw, u8 *aq_failures, |
| bool atomic_restart) |
| { |
| struct i40e_aq_get_phy_abilities_resp abilities; |
| enum i40e_status_code status; |
| |
| *aq_failures = 0x0; |
| |
| /* Get the current phy config */ |
| status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities, |
| NULL); |
| if (status) { |
| *aq_failures |= I40E_SET_FC_AQ_FAIL_GET; |
| return status; |
| } |
| |
| status = i40e_set_fc_status(hw, &abilities, atomic_restart); |
| if (status) |
| *aq_failures |= I40E_SET_FC_AQ_FAIL_SET; |
| |
| /* Update the link info */ |
| status = i40e_update_link_info(hw); |
| if (status) { |
| /* Wait a little bit (on 40G cards it sometimes takes a really |
| * long time for link to come back from the atomic reset) |
| * and try once more |
| */ |
| msleep(1000); |
| status = i40e_update_link_info(hw); |
| } |
| if (status) |
| *aq_failures |= I40E_SET_FC_AQ_FAIL_UPDATE; |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_clear_pxe_mode |
| * @hw: pointer to the hw struct |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Tell the firmware that the driver is taking over from PXE |
| **/ |
| i40e_status i40e_aq_clear_pxe_mode(struct i40e_hw *hw, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| i40e_status status; |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_clear_pxe *cmd = |
| (struct i40e_aqc_clear_pxe *)&desc.params.raw; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_clear_pxe_mode); |
| |
| cmd->rx_cnt = 0x2; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| wr32(hw, I40E_GLLAN_RCTL_0, 0x1); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_link_restart_an |
| * @hw: pointer to the hw struct |
| * @enable_link: if true: enable link, if false: disable link |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Sets up the link and restarts the Auto-Negotiation over the link. |
| **/ |
| i40e_status i40e_aq_set_link_restart_an(struct i40e_hw *hw, |
| bool enable_link, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_link_restart_an *cmd = |
| (struct i40e_aqc_set_link_restart_an *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_link_restart_an); |
| |
| cmd->command = I40E_AQ_PHY_RESTART_AN; |
| if (enable_link) |
| cmd->command |= I40E_AQ_PHY_LINK_ENABLE; |
| else |
| cmd->command &= ~I40E_AQ_PHY_LINK_ENABLE; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_link_info |
| * @hw: pointer to the hw struct |
| * @enable_lse: enable/disable LinkStatusEvent reporting |
| * @link: pointer to link status structure - optional |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Returns the link status of the adapter. |
| **/ |
| i40e_status i40e_aq_get_link_info(struct i40e_hw *hw, |
| bool enable_lse, struct i40e_link_status *link, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_get_link_status *resp = |
| (struct i40e_aqc_get_link_status *)&desc.params.raw; |
| struct i40e_link_status *hw_link_info = &hw->phy.link_info; |
| i40e_status status; |
| bool tx_pause, rx_pause; |
| u16 command_flags; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_get_link_status); |
| |
| if (enable_lse) |
| command_flags = I40E_AQ_LSE_ENABLE; |
| else |
| command_flags = I40E_AQ_LSE_DISABLE; |
| resp->command_flags = cpu_to_le16(command_flags); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| if (status) |
| goto aq_get_link_info_exit; |
| |
| /* save off old link status information */ |
| hw->phy.link_info_old = *hw_link_info; |
| |
| /* update link status */ |
| hw_link_info->phy_type = (enum i40e_aq_phy_type)resp->phy_type; |
| hw->phy.media_type = i40e_get_media_type(hw); |
| hw_link_info->link_speed = (enum i40e_aq_link_speed)resp->link_speed; |
| hw_link_info->link_info = resp->link_info; |
| hw_link_info->an_info = resp->an_info; |
| hw_link_info->fec_info = resp->config & (I40E_AQ_CONFIG_FEC_KR_ENA | |
| I40E_AQ_CONFIG_FEC_RS_ENA); |
| hw_link_info->ext_info = resp->ext_info; |
| hw_link_info->loopback = resp->loopback & I40E_AQ_LOOPBACK_MASK; |
| hw_link_info->max_frame_size = le16_to_cpu(resp->max_frame_size); |
| hw_link_info->pacing = resp->config & I40E_AQ_CONFIG_PACING_MASK; |
| |
| /* update fc info */ |
| tx_pause = !!(resp->an_info & I40E_AQ_LINK_PAUSE_TX); |
| rx_pause = !!(resp->an_info & I40E_AQ_LINK_PAUSE_RX); |
| if (tx_pause & rx_pause) |
| hw->fc.current_mode = I40E_FC_FULL; |
| else if (tx_pause) |
| hw->fc.current_mode = I40E_FC_TX_PAUSE; |
| else if (rx_pause) |
| hw->fc.current_mode = I40E_FC_RX_PAUSE; |
| else |
| hw->fc.current_mode = I40E_FC_NONE; |
| |
| if (resp->config & I40E_AQ_CONFIG_CRC_ENA) |
| hw_link_info->crc_enable = true; |
| else |
| hw_link_info->crc_enable = false; |
| |
| if (resp->command_flags & cpu_to_le16(I40E_AQ_LSE_IS_ENABLED)) |
| hw_link_info->lse_enable = true; |
| else |
| hw_link_info->lse_enable = false; |
| |
| if ((hw->mac.type == I40E_MAC_XL710) && |
| (hw->aq.fw_maj_ver < 4 || (hw->aq.fw_maj_ver == 4 && |
| hw->aq.fw_min_ver < 40)) && hw_link_info->phy_type == 0xE) |
| hw_link_info->phy_type = I40E_PHY_TYPE_10GBASE_SFPP_CU; |
| |
| if (hw->flags & I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE && |
| hw->mac.type != I40E_MAC_X722) { |
| __le32 tmp; |
| |
| memcpy(&tmp, resp->link_type, sizeof(tmp)); |
| hw->phy.phy_types = le32_to_cpu(tmp); |
| hw->phy.phy_types |= ((u64)resp->link_type_ext << 32); |
| } |
| |
| /* save link status information */ |
| if (link) |
| *link = *hw_link_info; |
| |
| /* flag cleared so helper functions don't call AQ again */ |
| hw->phy.get_link_info = false; |
| |
| aq_get_link_info_exit: |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_phy_int_mask |
| * @hw: pointer to the hw struct |
| * @mask: interrupt mask to be set |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Set link interrupt mask. |
| **/ |
| i40e_status i40e_aq_set_phy_int_mask(struct i40e_hw *hw, |
| u16 mask, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_phy_int_mask *cmd = |
| (struct i40e_aqc_set_phy_int_mask *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_phy_int_mask); |
| |
| cmd->event_mask = cpu_to_le16(mask); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_phy_debug |
| * @hw: pointer to the hw struct |
| * @cmd_flags: debug command flags |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Reset the external PHY. |
| **/ |
| i40e_status i40e_aq_set_phy_debug(struct i40e_hw *hw, u8 cmd_flags, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_phy_debug *cmd = |
| (struct i40e_aqc_set_phy_debug *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_phy_debug); |
| |
| cmd->command_flags = cmd_flags; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_is_aq_api_ver_ge |
| * @aq: pointer to AdminQ info containing HW API version to compare |
| * @maj: API major value |
| * @min: API minor value |
| * |
| * Assert whether current HW API version is greater/equal than provided. |
| **/ |
| static bool i40e_is_aq_api_ver_ge(struct i40e_adminq_info *aq, u16 maj, |
| u16 min) |
| { |
| return (aq->api_maj_ver > maj || |
| (aq->api_maj_ver == maj && aq->api_min_ver >= min)); |
| } |
| |
| /** |
| * i40e_aq_add_vsi |
| * @hw: pointer to the hw struct |
| * @vsi_ctx: pointer to a vsi context struct |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Add a VSI context to the hardware. |
| **/ |
| i40e_status i40e_aq_add_vsi(struct i40e_hw *hw, |
| struct i40e_vsi_context *vsi_ctx, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_get_update_vsi *cmd = |
| (struct i40e_aqc_add_get_update_vsi *)&desc.params.raw; |
| struct i40e_aqc_add_get_update_vsi_completion *resp = |
| (struct i40e_aqc_add_get_update_vsi_completion *) |
| &desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_add_vsi); |
| |
| cmd->uplink_seid = cpu_to_le16(vsi_ctx->uplink_seid); |
| cmd->connection_type = vsi_ctx->connection_type; |
| cmd->vf_id = vsi_ctx->vf_num; |
| cmd->vsi_flags = cpu_to_le16(vsi_ctx->flags); |
| |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| |
| status = i40e_asq_send_command(hw, &desc, &vsi_ctx->info, |
| sizeof(vsi_ctx->info), cmd_details); |
| |
| if (status) |
| goto aq_add_vsi_exit; |
| |
| vsi_ctx->seid = le16_to_cpu(resp->seid); |
| vsi_ctx->vsi_number = le16_to_cpu(resp->vsi_number); |
| vsi_ctx->vsis_allocated = le16_to_cpu(resp->vsi_used); |
| vsi_ctx->vsis_unallocated = le16_to_cpu(resp->vsi_free); |
| |
| aq_add_vsi_exit: |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_default_vsi |
| * @hw: pointer to the hw struct |
| * @seid: vsi number |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_set_default_vsi(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_vsi_promiscuous_modes *cmd = |
| (struct i40e_aqc_set_vsi_promiscuous_modes *) |
| &desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_vsi_promiscuous_modes); |
| |
| cmd->promiscuous_flags = cpu_to_le16(I40E_AQC_SET_VSI_DEFAULT); |
| cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_DEFAULT); |
| cmd->seid = cpu_to_le16(seid); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_clear_default_vsi |
| * @hw: pointer to the hw struct |
| * @seid: vsi number |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_clear_default_vsi(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_vsi_promiscuous_modes *cmd = |
| (struct i40e_aqc_set_vsi_promiscuous_modes *) |
| &desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_vsi_promiscuous_modes); |
| |
| cmd->promiscuous_flags = cpu_to_le16(0); |
| cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_DEFAULT); |
| cmd->seid = cpu_to_le16(seid); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_vsi_unicast_promiscuous |
| * @hw: pointer to the hw struct |
| * @seid: vsi number |
| * @set: set unicast promiscuous enable/disable |
| * @cmd_details: pointer to command details structure or NULL |
| * @rx_only_promisc: flag to decide if egress traffic gets mirrored in promisc |
| **/ |
| i40e_status i40e_aq_set_vsi_unicast_promiscuous(struct i40e_hw *hw, |
| u16 seid, bool set, |
| struct i40e_asq_cmd_details *cmd_details, |
| bool rx_only_promisc) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_vsi_promiscuous_modes *cmd = |
| (struct i40e_aqc_set_vsi_promiscuous_modes *)&desc.params.raw; |
| i40e_status status; |
| u16 flags = 0; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_vsi_promiscuous_modes); |
| |
| if (set) { |
| flags |= I40E_AQC_SET_VSI_PROMISC_UNICAST; |
| if (rx_only_promisc && i40e_is_aq_api_ver_ge(&hw->aq, 1, 5)) |
| flags |= I40E_AQC_SET_VSI_PROMISC_RX_ONLY; |
| } |
| |
| cmd->promiscuous_flags = cpu_to_le16(flags); |
| |
| cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_UNICAST); |
| if (i40e_is_aq_api_ver_ge(&hw->aq, 1, 5)) |
| cmd->valid_flags |= |
| cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_RX_ONLY); |
| |
| cmd->seid = cpu_to_le16(seid); |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_vsi_multicast_promiscuous |
| * @hw: pointer to the hw struct |
| * @seid: vsi number |
| * @set: set multicast promiscuous enable/disable |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_set_vsi_multicast_promiscuous(struct i40e_hw *hw, |
| u16 seid, bool set, struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_vsi_promiscuous_modes *cmd = |
| (struct i40e_aqc_set_vsi_promiscuous_modes *)&desc.params.raw; |
| i40e_status status; |
| u16 flags = 0; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_vsi_promiscuous_modes); |
| |
| if (set) |
| flags |= I40E_AQC_SET_VSI_PROMISC_MULTICAST; |
| |
| cmd->promiscuous_flags = cpu_to_le16(flags); |
| |
| cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_MULTICAST); |
| |
| cmd->seid = cpu_to_le16(seid); |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_vsi_mc_promisc_on_vlan |
| * @hw: pointer to the hw struct |
| * @seid: vsi number |
| * @enable: set MAC L2 layer unicast promiscuous enable/disable for a given VLAN |
| * @vid: The VLAN tag filter - capture any multicast packet with this VLAN tag |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| enum i40e_status_code i40e_aq_set_vsi_mc_promisc_on_vlan(struct i40e_hw *hw, |
| u16 seid, bool enable, |
| u16 vid, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_vsi_promiscuous_modes *cmd = |
| (struct i40e_aqc_set_vsi_promiscuous_modes *)&desc.params.raw; |
| enum i40e_status_code status; |
| u16 flags = 0; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_vsi_promiscuous_modes); |
| |
| if (enable) |
| flags |= I40E_AQC_SET_VSI_PROMISC_MULTICAST; |
| |
| cmd->promiscuous_flags = cpu_to_le16(flags); |
| cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_MULTICAST); |
| cmd->seid = cpu_to_le16(seid); |
| cmd->vlan_tag = cpu_to_le16(vid | I40E_AQC_SET_VSI_VLAN_VALID); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_vsi_uc_promisc_on_vlan |
| * @hw: pointer to the hw struct |
| * @seid: vsi number |
| * @enable: set MAC L2 layer unicast promiscuous enable/disable for a given VLAN |
| * @vid: The VLAN tag filter - capture any unicast packet with this VLAN tag |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| enum i40e_status_code i40e_aq_set_vsi_uc_promisc_on_vlan(struct i40e_hw *hw, |
| u16 seid, bool enable, |
| u16 vid, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_vsi_promiscuous_modes *cmd = |
| (struct i40e_aqc_set_vsi_promiscuous_modes *)&desc.params.raw; |
| enum i40e_status_code status; |
| u16 flags = 0; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_vsi_promiscuous_modes); |
| |
| if (enable) { |
| flags |= I40E_AQC_SET_VSI_PROMISC_UNICAST; |
| if (i40e_is_aq_api_ver_ge(&hw->aq, 1, 5)) |
| flags |= I40E_AQC_SET_VSI_PROMISC_RX_ONLY; |
| } |
| |
| cmd->promiscuous_flags = cpu_to_le16(flags); |
| cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_UNICAST); |
| if (i40e_is_aq_api_ver_ge(&hw->aq, 1, 5)) |
| cmd->valid_flags |= |
| cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_RX_ONLY); |
| cmd->seid = cpu_to_le16(seid); |
| cmd->vlan_tag = cpu_to_le16(vid | I40E_AQC_SET_VSI_VLAN_VALID); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_vsi_bc_promisc_on_vlan |
| * @hw: pointer to the hw struct |
| * @seid: vsi number |
| * @enable: set broadcast promiscuous enable/disable for a given VLAN |
| * @vid: The VLAN tag filter - capture any broadcast packet with this VLAN tag |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_set_vsi_bc_promisc_on_vlan(struct i40e_hw *hw, |
| u16 seid, bool enable, u16 vid, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_vsi_promiscuous_modes *cmd = |
| (struct i40e_aqc_set_vsi_promiscuous_modes *)&desc.params.raw; |
| i40e_status status; |
| u16 flags = 0; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_vsi_promiscuous_modes); |
| |
| if (enable) |
| flags |= I40E_AQC_SET_VSI_PROMISC_BROADCAST; |
| |
| cmd->promiscuous_flags = cpu_to_le16(flags); |
| cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_BROADCAST); |
| cmd->seid = cpu_to_le16(seid); |
| cmd->vlan_tag = cpu_to_le16(vid | I40E_AQC_SET_VSI_VLAN_VALID); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_vsi_broadcast |
| * @hw: pointer to the hw struct |
| * @seid: vsi number |
| * @set_filter: true to set filter, false to clear filter |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Set or clear the broadcast promiscuous flag (filter) for a given VSI. |
| **/ |
| i40e_status i40e_aq_set_vsi_broadcast(struct i40e_hw *hw, |
| u16 seid, bool set_filter, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_vsi_promiscuous_modes *cmd = |
| (struct i40e_aqc_set_vsi_promiscuous_modes *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_vsi_promiscuous_modes); |
| |
| if (set_filter) |
| cmd->promiscuous_flags |
| |= cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_BROADCAST); |
| else |
| cmd->promiscuous_flags |
| &= cpu_to_le16(~I40E_AQC_SET_VSI_PROMISC_BROADCAST); |
| |
| cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_BROADCAST); |
| cmd->seid = cpu_to_le16(seid); |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_vsi_vlan_promisc - control the VLAN promiscuous setting |
| * @hw: pointer to the hw struct |
| * @seid: vsi number |
| * @enable: set MAC L2 layer unicast promiscuous enable/disable for a given VLAN |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_set_vsi_vlan_promisc(struct i40e_hw *hw, |
| u16 seid, bool enable, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_vsi_promiscuous_modes *cmd = |
| (struct i40e_aqc_set_vsi_promiscuous_modes *)&desc.params.raw; |
| i40e_status status; |
| u16 flags = 0; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_vsi_promiscuous_modes); |
| if (enable) |
| flags |= I40E_AQC_SET_VSI_PROMISC_VLAN; |
| |
| cmd->promiscuous_flags = cpu_to_le16(flags); |
| cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_VLAN); |
| cmd->seid = cpu_to_le16(seid); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_vsi_params - get VSI configuration info |
| * @hw: pointer to the hw struct |
| * @vsi_ctx: pointer to a vsi context struct |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_get_vsi_params(struct i40e_hw *hw, |
| struct i40e_vsi_context *vsi_ctx, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_get_update_vsi *cmd = |
| (struct i40e_aqc_add_get_update_vsi *)&desc.params.raw; |
| struct i40e_aqc_add_get_update_vsi_completion *resp = |
| (struct i40e_aqc_add_get_update_vsi_completion *) |
| &desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_get_vsi_parameters); |
| |
| cmd->uplink_seid = cpu_to_le16(vsi_ctx->seid); |
| |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| |
| status = i40e_asq_send_command(hw, &desc, &vsi_ctx->info, |
| sizeof(vsi_ctx->info), NULL); |
| |
| if (status) |
| goto aq_get_vsi_params_exit; |
| |
| vsi_ctx->seid = le16_to_cpu(resp->seid); |
| vsi_ctx->vsi_number = le16_to_cpu(resp->vsi_number); |
| vsi_ctx->vsis_allocated = le16_to_cpu(resp->vsi_used); |
| vsi_ctx->vsis_unallocated = le16_to_cpu(resp->vsi_free); |
| |
| aq_get_vsi_params_exit: |
| return status; |
| } |
| |
| /** |
| * i40e_aq_update_vsi_params |
| * @hw: pointer to the hw struct |
| * @vsi_ctx: pointer to a vsi context struct |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Update a VSI context. |
| **/ |
| i40e_status i40e_aq_update_vsi_params(struct i40e_hw *hw, |
| struct i40e_vsi_context *vsi_ctx, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_get_update_vsi *cmd = |
| (struct i40e_aqc_add_get_update_vsi *)&desc.params.raw; |
| struct i40e_aqc_add_get_update_vsi_completion *resp = |
| (struct i40e_aqc_add_get_update_vsi_completion *) |
| &desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_update_vsi_parameters); |
| cmd->uplink_seid = cpu_to_le16(vsi_ctx->seid); |
| |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| |
| status = i40e_asq_send_command(hw, &desc, &vsi_ctx->info, |
| sizeof(vsi_ctx->info), cmd_details); |
| |
| vsi_ctx->vsis_allocated = le16_to_cpu(resp->vsi_used); |
| vsi_ctx->vsis_unallocated = le16_to_cpu(resp->vsi_free); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_switch_config |
| * @hw: pointer to the hardware structure |
| * @buf: pointer to the result buffer |
| * @buf_size: length of input buffer |
| * @start_seid: seid to start for the report, 0 == beginning |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Fill the buf with switch configuration returned from AdminQ command |
| **/ |
| i40e_status i40e_aq_get_switch_config(struct i40e_hw *hw, |
| struct i40e_aqc_get_switch_config_resp *buf, |
| u16 buf_size, u16 *start_seid, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_switch_seid *scfg = |
| (struct i40e_aqc_switch_seid *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_get_switch_config); |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (buf_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| scfg->seid = cpu_to_le16(*start_seid); |
| |
| status = i40e_asq_send_command(hw, &desc, buf, buf_size, cmd_details); |
| *start_seid = le16_to_cpu(scfg->seid); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_switch_config |
| * @hw: pointer to the hardware structure |
| * @flags: bit flag values to set |
| * @mode: cloud filter mode |
| * @valid_flags: which bit flags to set |
| * @mode: cloud filter mode |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Set switch configuration bits |
| **/ |
| enum i40e_status_code i40e_aq_set_switch_config(struct i40e_hw *hw, |
| u16 flags, |
| u16 valid_flags, u8 mode, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_switch_config *scfg = |
| (struct i40e_aqc_set_switch_config *)&desc.params.raw; |
| enum i40e_status_code status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_switch_config); |
| scfg->flags = cpu_to_le16(flags); |
| scfg->valid_flags = cpu_to_le16(valid_flags); |
| scfg->mode = mode; |
| if (hw->flags & I40E_HW_FLAG_802_1AD_CAPABLE) { |
| scfg->switch_tag = cpu_to_le16(hw->switch_tag); |
| scfg->first_tag = cpu_to_le16(hw->first_tag); |
| scfg->second_tag = cpu_to_le16(hw->second_tag); |
| } |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_firmware_version |
| * @hw: pointer to the hw struct |
| * @fw_major_version: firmware major version |
| * @fw_minor_version: firmware minor version |
| * @fw_build: firmware build number |
| * @api_major_version: major queue version |
| * @api_minor_version: minor queue version |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Get the firmware version from the admin queue commands |
| **/ |
| i40e_status i40e_aq_get_firmware_version(struct i40e_hw *hw, |
| u16 *fw_major_version, u16 *fw_minor_version, |
| u32 *fw_build, |
| u16 *api_major_version, u16 *api_minor_version, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_get_version *resp = |
| (struct i40e_aqc_get_version *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_get_version); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| if (!status) { |
| if (fw_major_version) |
| *fw_major_version = le16_to_cpu(resp->fw_major); |
| if (fw_minor_version) |
| *fw_minor_version = le16_to_cpu(resp->fw_minor); |
| if (fw_build) |
| *fw_build = le32_to_cpu(resp->fw_build); |
| if (api_major_version) |
| *api_major_version = le16_to_cpu(resp->api_major); |
| if (api_minor_version) |
| *api_minor_version = le16_to_cpu(resp->api_minor); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_send_driver_version |
| * @hw: pointer to the hw struct |
| * @dv: driver's major, minor version |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Send the driver version to the firmware |
| **/ |
| i40e_status i40e_aq_send_driver_version(struct i40e_hw *hw, |
| struct i40e_driver_version *dv, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_driver_version *cmd = |
| (struct i40e_aqc_driver_version *)&desc.params.raw; |
| i40e_status status; |
| u16 len; |
| |
| if (dv == NULL) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_driver_version); |
| |
| desc.flags |= cpu_to_le16(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD); |
| cmd->driver_major_ver = dv->major_version; |
| cmd->driver_minor_ver = dv->minor_version; |
| cmd->driver_build_ver = dv->build_version; |
| cmd->driver_subbuild_ver = dv->subbuild_version; |
| |
| len = 0; |
| while (len < sizeof(dv->driver_string) && |
| (dv->driver_string[len] < 0x80) && |
| dv->driver_string[len]) |
| len++; |
| status = i40e_asq_send_command(hw, &desc, dv->driver_string, |
| len, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_get_link_status - get status of the HW network link |
| * @hw: pointer to the hw struct |
| * @link_up: pointer to bool (true/false = linkup/linkdown) |
| * |
| * Variable link_up true if link is up, false if link is down. |
| * The variable link_up is invalid if returned value of status != 0 |
| * |
| * Side effect: LinkStatusEvent reporting becomes enabled |
| **/ |
| i40e_status i40e_get_link_status(struct i40e_hw *hw, bool *link_up) |
| { |
| i40e_status status = 0; |
| |
| if (hw->phy.get_link_info) { |
| status = i40e_update_link_info(hw); |
| |
| if (status) |
| i40e_debug(hw, I40E_DEBUG_LINK, "get link failed: status %d\n", |
| status); |
| } |
| |
| *link_up = hw->phy.link_info.link_info & I40E_AQ_LINK_UP; |
| |
| return status; |
| } |
| |
| /** |
| * i40e_update_link_info - update status of the HW network link |
| * @hw: pointer to the hw struct |
| **/ |
| noinline_for_stack i40e_status i40e_update_link_info(struct i40e_hw *hw) |
| { |
| struct i40e_aq_get_phy_abilities_resp abilities; |
| i40e_status status = 0; |
| |
| status = i40e_aq_get_link_info(hw, true, NULL, NULL); |
| if (status) |
| return status; |
| |
| /* extra checking needed to ensure link info to user is timely */ |
| if ((hw->phy.link_info.link_info & I40E_AQ_MEDIA_AVAILABLE) && |
| ((hw->phy.link_info.link_info & I40E_AQ_LINK_UP) || |
| !(hw->phy.link_info_old.link_info & I40E_AQ_LINK_UP))) { |
| status = i40e_aq_get_phy_capabilities(hw, false, false, |
| &abilities, NULL); |
| if (status) |
| return status; |
| |
| if (abilities.fec_cfg_curr_mod_ext_info & |
| I40E_AQ_ENABLE_FEC_AUTO) |
| hw->phy.link_info.req_fec_info = |
| (I40E_AQ_REQUEST_FEC_KR | |
| I40E_AQ_REQUEST_FEC_RS); |
| else |
| hw->phy.link_info.req_fec_info = |
| abilities.fec_cfg_curr_mod_ext_info & |
| (I40E_AQ_REQUEST_FEC_KR | |
| I40E_AQ_REQUEST_FEC_RS); |
| |
| memcpy(hw->phy.link_info.module_type, &abilities.module_type, |
| sizeof(hw->phy.link_info.module_type)); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_add_veb - Insert a VEB between the VSI and the MAC |
| * @hw: pointer to the hw struct |
| * @uplink_seid: the MAC or other gizmo SEID |
| * @downlink_seid: the VSI SEID |
| * @enabled_tc: bitmap of TCs to be enabled |
| * @default_port: true for default port VSI, false for control port |
| * @veb_seid: pointer to where to put the resulting VEB SEID |
| * @enable_stats: true to turn on VEB stats |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * This asks the FW to add a VEB between the uplink and downlink |
| * elements. If the uplink SEID is 0, this will be a floating VEB. |
| **/ |
| i40e_status i40e_aq_add_veb(struct i40e_hw *hw, u16 uplink_seid, |
| u16 downlink_seid, u8 enabled_tc, |
| bool default_port, u16 *veb_seid, |
| bool enable_stats, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_veb *cmd = |
| (struct i40e_aqc_add_veb *)&desc.params.raw; |
| struct i40e_aqc_add_veb_completion *resp = |
| (struct i40e_aqc_add_veb_completion *)&desc.params.raw; |
| i40e_status status; |
| u16 veb_flags = 0; |
| |
| /* SEIDs need to either both be set or both be 0 for floating VEB */ |
| if (!!uplink_seid != !!downlink_seid) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_add_veb); |
| |
| cmd->uplink_seid = cpu_to_le16(uplink_seid); |
| cmd->downlink_seid = cpu_to_le16(downlink_seid); |
| cmd->enable_tcs = enabled_tc; |
| if (!uplink_seid) |
| veb_flags |= I40E_AQC_ADD_VEB_FLOATING; |
| if (default_port) |
| veb_flags |= I40E_AQC_ADD_VEB_PORT_TYPE_DEFAULT; |
| else |
| veb_flags |= I40E_AQC_ADD_VEB_PORT_TYPE_DATA; |
| |
| /* reverse logic here: set the bitflag to disable the stats */ |
| if (!enable_stats) |
| veb_flags |= I40E_AQC_ADD_VEB_ENABLE_DISABLE_STATS; |
| |
| cmd->veb_flags = cpu_to_le16(veb_flags); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| if (!status && veb_seid) |
| *veb_seid = le16_to_cpu(resp->veb_seid); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_veb_parameters - Retrieve VEB parameters |
| * @hw: pointer to the hw struct |
| * @veb_seid: the SEID of the VEB to query |
| * @switch_id: the uplink switch id |
| * @floating: set to true if the VEB is floating |
| * @statistic_index: index of the stats counter block for this VEB |
| * @vebs_used: number of VEB's used by function |
| * @vebs_free: total VEB's not reserved by any function |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * This retrieves the parameters for a particular VEB, specified by |
| * uplink_seid, and returns them to the caller. |
| **/ |
| i40e_status i40e_aq_get_veb_parameters(struct i40e_hw *hw, |
| u16 veb_seid, u16 *switch_id, |
| bool *floating, u16 *statistic_index, |
| u16 *vebs_used, u16 *vebs_free, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_get_veb_parameters_completion *cmd_resp = |
| (struct i40e_aqc_get_veb_parameters_completion *) |
| &desc.params.raw; |
| i40e_status status; |
| |
| if (veb_seid == 0) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_get_veb_parameters); |
| cmd_resp->seid = cpu_to_le16(veb_seid); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| if (status) |
| goto get_veb_exit; |
| |
| if (switch_id) |
| *switch_id = le16_to_cpu(cmd_resp->switch_id); |
| if (statistic_index) |
| *statistic_index = le16_to_cpu(cmd_resp->statistic_index); |
| if (vebs_used) |
| *vebs_used = le16_to_cpu(cmd_resp->vebs_used); |
| if (vebs_free) |
| *vebs_free = le16_to_cpu(cmd_resp->vebs_free); |
| if (floating) { |
| u16 flags = le16_to_cpu(cmd_resp->veb_flags); |
| |
| if (flags & I40E_AQC_ADD_VEB_FLOATING) |
| *floating = true; |
| else |
| *floating = false; |
| } |
| |
| get_veb_exit: |
| return status; |
| } |
| |
| /** |
| * i40e_aq_add_macvlan |
| * @hw: pointer to the hw struct |
| * @seid: VSI for the mac address |
| * @mv_list: list of macvlans to be added |
| * @count: length of the list |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Add MAC/VLAN addresses to the HW filtering |
| **/ |
| i40e_status i40e_aq_add_macvlan(struct i40e_hw *hw, u16 seid, |
| struct i40e_aqc_add_macvlan_element_data *mv_list, |
| u16 count, struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_macvlan *cmd = |
| (struct i40e_aqc_macvlan *)&desc.params.raw; |
| i40e_status status; |
| u16 buf_size; |
| int i; |
| |
| if (count == 0 || !mv_list || !hw) |
| return I40E_ERR_PARAM; |
| |
| buf_size = count * sizeof(*mv_list); |
| |
| /* prep the rest of the request */ |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_add_macvlan); |
| cmd->num_addresses = cpu_to_le16(count); |
| cmd->seid[0] = cpu_to_le16(I40E_AQC_MACVLAN_CMD_SEID_VALID | seid); |
| cmd->seid[1] = 0; |
| cmd->seid[2] = 0; |
| |
| for (i = 0; i < count; i++) |
| if (is_multicast_ether_addr(mv_list[i].mac_addr)) |
| mv_list[i].flags |= |
| cpu_to_le16(I40E_AQC_MACVLAN_ADD_USE_SHARED_MAC); |
| |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| if (buf_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, mv_list, buf_size, |
| cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_remove_macvlan |
| * @hw: pointer to the hw struct |
| * @seid: VSI for the mac address |
| * @mv_list: list of macvlans to be removed |
| * @count: length of the list |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Remove MAC/VLAN addresses from the HW filtering |
| **/ |
| i40e_status i40e_aq_remove_macvlan(struct i40e_hw *hw, u16 seid, |
| struct i40e_aqc_remove_macvlan_element_data *mv_list, |
| u16 count, struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_macvlan *cmd = |
| (struct i40e_aqc_macvlan *)&desc.params.raw; |
| i40e_status status; |
| u16 buf_size; |
| |
| if (count == 0 || !mv_list || !hw) |
| return I40E_ERR_PARAM; |
| |
| buf_size = count * sizeof(*mv_list); |
| |
| /* prep the rest of the request */ |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_remove_macvlan); |
| cmd->num_addresses = cpu_to_le16(count); |
| cmd->seid[0] = cpu_to_le16(I40E_AQC_MACVLAN_CMD_SEID_VALID | seid); |
| cmd->seid[1] = 0; |
| cmd->seid[2] = 0; |
| |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| if (buf_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, mv_list, buf_size, |
| cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_mirrorrule_op - Internal helper function to add/delete mirror rule |
| * @hw: pointer to the hw struct |
| * @opcode: AQ opcode for add or delete mirror rule |
| * @sw_seid: Switch SEID (to which rule refers) |
| * @rule_type: Rule Type (ingress/egress/VLAN) |
| * @id: Destination VSI SEID or Rule ID |
| * @count: length of the list |
| * @mr_list: list of mirrored VSI SEIDs or VLAN IDs |
| * @cmd_details: pointer to command details structure or NULL |
| * @rule_id: Rule ID returned from FW |
| * @rules_used: Number of rules used in internal switch |
| * @rules_free: Number of rules free in internal switch |
| * |
| * Add/Delete a mirror rule to a specific switch. Mirror rules are supported for |
| * VEBs/VEPA elements only |
| **/ |
| static i40e_status i40e_mirrorrule_op(struct i40e_hw *hw, |
| u16 opcode, u16 sw_seid, u16 rule_type, u16 id, |
| u16 count, __le16 *mr_list, |
| struct i40e_asq_cmd_details *cmd_details, |
| u16 *rule_id, u16 *rules_used, u16 *rules_free) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_delete_mirror_rule *cmd = |
| (struct i40e_aqc_add_delete_mirror_rule *)&desc.params.raw; |
| struct i40e_aqc_add_delete_mirror_rule_completion *resp = |
| (struct i40e_aqc_add_delete_mirror_rule_completion *)&desc.params.raw; |
| i40e_status status; |
| u16 buf_size; |
| |
| buf_size = count * sizeof(*mr_list); |
| |
| /* prep the rest of the request */ |
| i40e_fill_default_direct_cmd_desc(&desc, opcode); |
| cmd->seid = cpu_to_le16(sw_seid); |
| cmd->rule_type = cpu_to_le16(rule_type & |
| I40E_AQC_MIRROR_RULE_TYPE_MASK); |
| cmd->num_entries = cpu_to_le16(count); |
| /* Dest VSI for add, rule_id for delete */ |
| cmd->destination = cpu_to_le16(id); |
| if (mr_list) { |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | |
| I40E_AQ_FLAG_RD)); |
| if (buf_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| } |
| |
| status = i40e_asq_send_command(hw, &desc, mr_list, buf_size, |
| cmd_details); |
| if (!status || |
| hw->aq.asq_last_status == I40E_AQ_RC_ENOSPC) { |
| if (rule_id) |
| *rule_id = le16_to_cpu(resp->rule_id); |
| if (rules_used) |
| *rules_used = le16_to_cpu(resp->mirror_rules_used); |
| if (rules_free) |
| *rules_free = le16_to_cpu(resp->mirror_rules_free); |
| } |
| return status; |
| } |
| |
| /** |
| * i40e_aq_add_mirrorrule - add a mirror rule |
| * @hw: pointer to the hw struct |
| * @sw_seid: Switch SEID (to which rule refers) |
| * @rule_type: Rule Type (ingress/egress/VLAN) |
| * @dest_vsi: SEID of VSI to which packets will be mirrored |
| * @count: length of the list |
| * @mr_list: list of mirrored VSI SEIDs or VLAN IDs |
| * @cmd_details: pointer to command details structure or NULL |
| * @rule_id: Rule ID returned from FW |
| * @rules_used: Number of rules used in internal switch |
| * @rules_free: Number of rules free in internal switch |
| * |
| * Add mirror rule. Mirror rules are supported for VEBs or VEPA elements only |
| **/ |
| i40e_status i40e_aq_add_mirrorrule(struct i40e_hw *hw, u16 sw_seid, |
| u16 rule_type, u16 dest_vsi, u16 count, __le16 *mr_list, |
| struct i40e_asq_cmd_details *cmd_details, |
| u16 *rule_id, u16 *rules_used, u16 *rules_free) |
| { |
| if (!(rule_type == I40E_AQC_MIRROR_RULE_TYPE_ALL_INGRESS || |
| rule_type == I40E_AQC_MIRROR_RULE_TYPE_ALL_EGRESS)) { |
| if (count == 0 || !mr_list) |
| return I40E_ERR_PARAM; |
| } |
| |
| return i40e_mirrorrule_op(hw, i40e_aqc_opc_add_mirror_rule, sw_seid, |
| rule_type, dest_vsi, count, mr_list, |
| cmd_details, rule_id, rules_used, rules_free); |
| } |
| |
| /** |
| * i40e_aq_delete_mirrorrule - delete a mirror rule |
| * @hw: pointer to the hw struct |
| * @sw_seid: Switch SEID (to which rule refers) |
| * @rule_type: Rule Type (ingress/egress/VLAN) |
| * @count: length of the list |
| * @rule_id: Rule ID that is returned in the receive desc as part of |
| * add_mirrorrule. |
| * @mr_list: list of mirrored VLAN IDs to be removed |
| * @cmd_details: pointer to command details structure or NULL |
| * @rules_used: Number of rules used in internal switch |
| * @rules_free: Number of rules free in internal switch |
| * |
| * Delete a mirror rule. Mirror rules are supported for VEBs/VEPA elements only |
| **/ |
| i40e_status i40e_aq_delete_mirrorrule(struct i40e_hw *hw, u16 sw_seid, |
| u16 rule_type, u16 rule_id, u16 count, __le16 *mr_list, |
| struct i40e_asq_cmd_details *cmd_details, |
| u16 *rules_used, u16 *rules_free) |
| { |
| /* Rule ID has to be valid except rule_type: INGRESS VLAN mirroring */ |
| if (rule_type == I40E_AQC_MIRROR_RULE_TYPE_VLAN) { |
| /* count and mr_list shall be valid for rule_type INGRESS VLAN |
| * mirroring. For other rule_type, count and rule_type should |
| * not matter. |
| */ |
| if (count == 0 || !mr_list) |
| return I40E_ERR_PARAM; |
| } |
| |
| return i40e_mirrorrule_op(hw, i40e_aqc_opc_delete_mirror_rule, sw_seid, |
| rule_type, rule_id, count, mr_list, |
| cmd_details, NULL, rules_used, rules_free); |
| } |
| |
| /** |
| * i40e_aq_send_msg_to_vf |
| * @hw: pointer to the hardware structure |
| * @vfid: VF id to send msg |
| * @v_opcode: opcodes for VF-PF communication |
| * @v_retval: return error code |
| * @msg: pointer to the msg buffer |
| * @msglen: msg length |
| * @cmd_details: pointer to command details |
| * |
| * send msg to vf |
| **/ |
| i40e_status i40e_aq_send_msg_to_vf(struct i40e_hw *hw, u16 vfid, |
| u32 v_opcode, u32 v_retval, u8 *msg, u16 msglen, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_pf_vf_message *cmd = |
| (struct i40e_aqc_pf_vf_message *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_send_msg_to_vf); |
| cmd->id = cpu_to_le32(vfid); |
| desc.cookie_high = cpu_to_le32(v_opcode); |
| desc.cookie_low = cpu_to_le32(v_retval); |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_SI); |
| if (msglen) { |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | |
| I40E_AQ_FLAG_RD)); |
| if (msglen > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| desc.datalen = cpu_to_le16(msglen); |
| } |
| status = i40e_asq_send_command(hw, &desc, msg, msglen, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_debug_read_register |
| * @hw: pointer to the hw struct |
| * @reg_addr: register address |
| * @reg_val: register value |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Read the register using the admin queue commands |
| **/ |
| i40e_status i40e_aq_debug_read_register(struct i40e_hw *hw, |
| u32 reg_addr, u64 *reg_val, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_debug_reg_read_write *cmd_resp = |
| (struct i40e_aqc_debug_reg_read_write *)&desc.params.raw; |
| i40e_status status; |
| |
| if (reg_val == NULL) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_debug_read_reg); |
| |
| cmd_resp->address = cpu_to_le32(reg_addr); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| if (!status) { |
| *reg_val = ((u64)le32_to_cpu(cmd_resp->value_high) << 32) | |
| (u64)le32_to_cpu(cmd_resp->value_low); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_debug_write_register |
| * @hw: pointer to the hw struct |
| * @reg_addr: register address |
| * @reg_val: register value |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Write to a register using the admin queue commands |
| **/ |
| i40e_status i40e_aq_debug_write_register(struct i40e_hw *hw, |
| u32 reg_addr, u64 reg_val, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_debug_reg_read_write *cmd = |
| (struct i40e_aqc_debug_reg_read_write *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_debug_write_reg); |
| |
| cmd->address = cpu_to_le32(reg_addr); |
| cmd->value_high = cpu_to_le32((u32)(reg_val >> 32)); |
| cmd->value_low = cpu_to_le32((u32)(reg_val & 0xFFFFFFFF)); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_request_resource |
| * @hw: pointer to the hw struct |
| * @resource: resource id |
| * @access: access type |
| * @sdp_number: resource number |
| * @timeout: the maximum time in ms that the driver may hold the resource |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * requests common resource using the admin queue commands |
| **/ |
| i40e_status i40e_aq_request_resource(struct i40e_hw *hw, |
| enum i40e_aq_resources_ids resource, |
| enum i40e_aq_resource_access_type access, |
| u8 sdp_number, u64 *timeout, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_request_resource *cmd_resp = |
| (struct i40e_aqc_request_resource *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_request_resource); |
| |
| cmd_resp->resource_id = cpu_to_le16(resource); |
| cmd_resp->access_type = cpu_to_le16(access); |
| cmd_resp->resource_number = cpu_to_le32(sdp_number); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| /* The completion specifies the maximum time in ms that the driver |
| * may hold the resource in the Timeout field. |
| * If the resource is held by someone else, the command completes with |
| * busy return value and the timeout field indicates the maximum time |
| * the current owner of the resource has to free it. |
| */ |
| if (!status || hw->aq.asq_last_status == I40E_AQ_RC_EBUSY) |
| *timeout = le32_to_cpu(cmd_resp->timeout); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_release_resource |
| * @hw: pointer to the hw struct |
| * @resource: resource id |
| * @sdp_number: resource number |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * release common resource using the admin queue commands |
| **/ |
| i40e_status i40e_aq_release_resource(struct i40e_hw *hw, |
| enum i40e_aq_resources_ids resource, |
| u8 sdp_number, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_request_resource *cmd = |
| (struct i40e_aqc_request_resource *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_release_resource); |
| |
| cmd->resource_id = cpu_to_le16(resource); |
| cmd->resource_number = cpu_to_le32(sdp_number); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_read_nvm |
| * @hw: pointer to the hw struct |
| * @module_pointer: module pointer location in words from the NVM beginning |
| * @offset: byte offset from the module beginning |
| * @length: length of the section to be read (in bytes from the offset) |
| * @data: command buffer (size [bytes] = length) |
| * @last_command: tells if this is the last command in a series |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Read the NVM using the admin queue commands |
| **/ |
| i40e_status i40e_aq_read_nvm(struct i40e_hw *hw, u8 module_pointer, |
| u32 offset, u16 length, void *data, |
| bool last_command, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_nvm_update *cmd = |
| (struct i40e_aqc_nvm_update *)&desc.params.raw; |
| i40e_status status; |
| |
| /* In offset the highest byte must be zeroed. */ |
| if (offset & 0xFF000000) { |
| status = I40E_ERR_PARAM; |
| goto i40e_aq_read_nvm_exit; |
| } |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_nvm_read); |
| |
| /* If this is the last command in a series, set the proper flag. */ |
| if (last_command) |
| cmd->command_flags |= I40E_AQ_NVM_LAST_CMD; |
| cmd->module_pointer = module_pointer; |
| cmd->offset = cpu_to_le32(offset); |
| cmd->length = cpu_to_le16(length); |
| |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (length > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, data, length, cmd_details); |
| |
| i40e_aq_read_nvm_exit: |
| return status; |
| } |
| |
| /** |
| * i40e_aq_erase_nvm |
| * @hw: pointer to the hw struct |
| * @module_pointer: module pointer location in words from the NVM beginning |
| * @offset: offset in the module (expressed in 4 KB from module's beginning) |
| * @length: length of the section to be erased (expressed in 4 KB) |
| * @last_command: tells if this is the last command in a series |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Erase the NVM sector using the admin queue commands |
| **/ |
| i40e_status i40e_aq_erase_nvm(struct i40e_hw *hw, u8 module_pointer, |
| u32 offset, u16 length, bool last_command, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_nvm_update *cmd = |
| (struct i40e_aqc_nvm_update *)&desc.params.raw; |
| i40e_status status; |
| |
| /* In offset the highest byte must be zeroed. */ |
| if (offset & 0xFF000000) { |
| status = I40E_ERR_PARAM; |
| goto i40e_aq_erase_nvm_exit; |
| } |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_nvm_erase); |
| |
| /* If this is the last command in a series, set the proper flag. */ |
| if (last_command) |
| cmd->command_flags |= I40E_AQ_NVM_LAST_CMD; |
| cmd->module_pointer = module_pointer; |
| cmd->offset = cpu_to_le32(offset); |
| cmd->length = cpu_to_le16(length); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| i40e_aq_erase_nvm_exit: |
| return status; |
| } |
| |
| /** |
| * i40e_parse_discover_capabilities |
| * @hw: pointer to the hw struct |
| * @buff: pointer to a buffer containing device/function capability records |
| * @cap_count: number of capability records in the list |
| * @list_type_opc: type of capabilities list to parse |
| * |
| * Parse the device/function capabilities list. |
| **/ |
| static void i40e_parse_discover_capabilities(struct i40e_hw *hw, void *buff, |
| u32 cap_count, |
| enum i40e_admin_queue_opc list_type_opc) |
| { |
| struct i40e_aqc_list_capabilities_element_resp *cap; |
| u32 valid_functions, num_functions; |
| u32 number, logical_id, phys_id; |
| struct i40e_hw_capabilities *p; |
| u16 id, ocp_cfg_word0; |
| i40e_status status; |
| u8 major_rev; |
| u32 i = 0; |
| |
| cap = (struct i40e_aqc_list_capabilities_element_resp *) buff; |
| |
| if (list_type_opc == i40e_aqc_opc_list_dev_capabilities) |
| p = &hw->dev_caps; |
| else if (list_type_opc == i40e_aqc_opc_list_func_capabilities) |
| p = &hw->func_caps; |
| else |
| return; |
| |
| for (i = 0; i < cap_count; i++, cap++) { |
| id = le16_to_cpu(cap->id); |
| number = le32_to_cpu(cap->number); |
| logical_id = le32_to_cpu(cap->logical_id); |
| phys_id = le32_to_cpu(cap->phys_id); |
| major_rev = cap->major_rev; |
| |
| switch (id) { |
| case I40E_AQ_CAP_ID_SWITCH_MODE: |
| p->switch_mode = number; |
| break; |
| case I40E_AQ_CAP_ID_MNG_MODE: |
| p->management_mode = number; |
| if (major_rev > 1) { |
| p->mng_protocols_over_mctp = logical_id; |
| i40e_debug(hw, I40E_DEBUG_INIT, |
| "HW Capability: Protocols over MCTP = %d\n", |
| p->mng_protocols_over_mctp); |
| } else { |
| p->mng_protocols_over_mctp = 0; |
| } |
| break; |
| case I40E_AQ_CAP_ID_NPAR_ACTIVE: |
| p->npar_enable = number; |
| break; |
| case I40E_AQ_CAP_ID_OS2BMC_CAP: |
| p->os2bmc = number; |
| break; |
| case I40E_AQ_CAP_ID_FUNCTIONS_VALID: |
| p->valid_functions = number; |
| break; |
| case I40E_AQ_CAP_ID_SRIOV: |
| if (number == 1) |
| p->sr_iov_1_1 = true; |
| break; |
| case I40E_AQ_CAP_ID_VF: |
| p->num_vfs = number; |
| p->vf_base_id = logical_id; |
| break; |
| case I40E_AQ_CAP_ID_VMDQ: |
| if (number == 1) |
| p->vmdq = true; |
| break; |
| case I40E_AQ_CAP_ID_8021QBG: |
| if (number == 1) |
| p->evb_802_1_qbg = true; |
| break; |
| case I40E_AQ_CAP_ID_8021QBR: |
| if (number == 1) |
| p->evb_802_1_qbh = true; |
| break; |
| case I40E_AQ_CAP_ID_VSI: |
| p->num_vsis = number; |
| break; |
| case I40E_AQ_CAP_ID_DCB: |
| if (number == 1) { |
| p->dcb = true; |
| p->enabled_tcmap = logical_id; |
| p->maxtc = phys_id; |
| } |
| break; |
| case I40E_AQ_CAP_ID_FCOE: |
| if (number == 1) |
| p->fcoe = true; |
| break; |
| case I40E_AQ_CAP_ID_ISCSI: |
| if (number == 1) |
| p->iscsi = true; |
| break; |
| case I40E_AQ_CAP_ID_RSS: |
| p->rss = true; |
| p->rss_table_size = number; |
| p->rss_table_entry_width = logical_id; |
| break; |
| case I40E_AQ_CAP_ID_RXQ: |
| p->num_rx_qp = number; |
| p->base_queue = phys_id; |
| break; |
| case I40E_AQ_CAP_ID_TXQ: |
| p->num_tx_qp = number; |
| p->base_queue = phys_id; |
| break; |
| case I40E_AQ_CAP_ID_MSIX: |
| p->num_msix_vectors = number; |
| i40e_debug(hw, I40E_DEBUG_INIT, |
| "HW Capability: MSIX vector count = %d\n", |
| p->num_msix_vectors); |
| break; |
| case I40E_AQ_CAP_ID_VF_MSIX: |
| p->num_msix_vectors_vf = number; |
| break; |
| case I40E_AQ_CAP_ID_FLEX10: |
| if (major_rev == 1) { |
| if (number == 1) { |
| p->flex10_enable = true; |
| p->flex10_capable = true; |
| } |
| } else { |
| /* Capability revision >= 2 */ |
| if (number & 1) |
| p->flex10_enable = true; |
| if (number & 2) |
| p->flex10_capable = true; |
| } |
| p->flex10_mode = logical_id; |
| p->flex10_status = phys_id; |
| break; |
| case I40E_AQ_CAP_ID_CEM: |
| if (number == 1) |
| p->mgmt_cem = true; |
| break; |
| case I40E_AQ_CAP_ID_IWARP: |
| if (number == 1) |
| p->iwarp = true; |
| break; |
| case I40E_AQ_CAP_ID_LED: |
| if (phys_id < I40E_HW_CAP_MAX_GPIO) |
| p->led[phys_id] = true; |
| break; |
| case I40E_AQ_CAP_ID_SDP: |
| if (phys_id < I40E_HW_CAP_MAX_GPIO) |
| p->sdp[phys_id] = true; |
| break; |
| case I40E_AQ_CAP_ID_MDIO: |
| if (number == 1) { |
| p->mdio_port_num = phys_id; |
| p->mdio_port_mode = logical_id; |
| } |
| break; |
| case I40E_AQ_CAP_ID_1588: |
| if (number == 1) |
| p->ieee_1588 = true; |
| break; |
| case I40E_AQ_CAP_ID_FLOW_DIRECTOR: |
| p->fd = true; |
| p->fd_filters_guaranteed = number; |
| p->fd_filters_best_effort = logical_id; |
| break; |
| case I40E_AQ_CAP_ID_WSR_PROT: |
| p->wr_csr_prot = (u64)number; |
| p->wr_csr_prot |= (u64)logical_id << 32; |
| break; |
| case I40E_AQ_CAP_ID_NVM_MGMT: |
| if (number & I40E_NVM_MGMT_SEC_REV_DISABLED) |
| p->sec_rev_disabled = true; |
| if (number & I40E_NVM_MGMT_UPDATE_DISABLED) |
| p->update_disabled = true; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| if (p->fcoe) |
| i40e_debug(hw, I40E_DEBUG_ALL, "device is FCoE capable\n"); |
| |
| /* Software override ensuring FCoE is disabled if npar or mfp |
| * mode because it is not supported in these modes. |
| */ |
| if (p->npar_enable || p->flex10_enable) |
| p->fcoe = false; |
| |
| /* count the enabled ports (aka the "not disabled" ports) */ |
| hw->num_ports = 0; |
| for (i = 0; i < 4; i++) { |
| u32 port_cfg_reg = I40E_PRTGEN_CNF + (4 * i); |
| u64 port_cfg = 0; |
| |
| /* use AQ read to get the physical register offset instead |
| * of the port relative offset |
| */ |
| i40e_aq_debug_read_register(hw, port_cfg_reg, &port_cfg, NULL); |
| if (!(port_cfg & I40E_PRTGEN_CNF_PORT_DIS_MASK)) |
| hw->num_ports++; |
| } |
| |
| /* OCP cards case: if a mezz is removed the Ethernet port is at |
| * disabled state in PRTGEN_CNF register. Additional NVM read is |
| * needed in order to check if we are dealing with OCP card. |
| * Those cards have 4 PFs at minimum, so using PRTGEN_CNF for counting |
| * physical ports results in wrong partition id calculation and thus |
| * not supporting WoL. |
| */ |
| if (hw->mac.type == I40E_MAC_X722) { |
| if (!i40e_acquire_nvm(hw, I40E_RESOURCE_READ)) { |
| status = i40e_aq_read_nvm(hw, I40E_SR_EMP_MODULE_PTR, |
| 2 * I40E_SR_OCP_CFG_WORD0, |
| sizeof(ocp_cfg_word0), |
| &ocp_cfg_word0, true, NULL); |
| if (!status && |
| (ocp_cfg_word0 & I40E_SR_OCP_ENABLED)) |
| hw->num_ports = 4; |
| i40e_release_nvm(hw); |
| } |
| } |
| |
| valid_functions = p->valid_functions; |
| num_functions = 0; |
| while (valid_functions) { |
| if (valid_functions & 1) |
| num_functions++; |
| valid_functions >>= 1; |
| } |
| |
| /* partition id is 1-based, and functions are evenly spread |
| * across the ports as partitions |
| */ |
| if (hw->num_ports != 0) { |
| hw->partition_id = (hw->pf_id / hw->num_ports) + 1; |
| hw->num_partitions = num_functions / hw->num_ports; |
| } |
| |
| /* additional HW specific goodies that might |
| * someday be HW version specific |
| */ |
| p->rx_buf_chain_len = I40E_MAX_CHAINED_RX_BUFFERS; |
| } |
| |
| /** |
| * i40e_aq_discover_capabilities |
| * @hw: pointer to the hw struct |
| * @buff: a virtual buffer to hold the capabilities |
| * @buff_size: Size of the virtual buffer |
| * @data_size: Size of the returned data, or buff size needed if AQ err==ENOMEM |
| * @list_type_opc: capabilities type to discover - pass in the command opcode |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Get the device capabilities descriptions from the firmware |
| **/ |
| i40e_status i40e_aq_discover_capabilities(struct i40e_hw *hw, |
| void *buff, u16 buff_size, u16 *data_size, |
| enum i40e_admin_queue_opc list_type_opc, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aqc_list_capabilites *cmd; |
| struct i40e_aq_desc desc; |
| i40e_status status = 0; |
| |
| cmd = (struct i40e_aqc_list_capabilites *)&desc.params.raw; |
| |
| if (list_type_opc != i40e_aqc_opc_list_func_capabilities && |
| list_type_opc != i40e_aqc_opc_list_dev_capabilities) { |
| status = I40E_ERR_PARAM; |
| goto exit; |
| } |
| |
| i40e_fill_default_direct_cmd_desc(&desc, list_type_opc); |
| |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (buff_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, buff, buff_size, cmd_details); |
| *data_size = le16_to_cpu(desc.datalen); |
| |
| if (status) |
| goto exit; |
| |
| i40e_parse_discover_capabilities(hw, buff, le32_to_cpu(cmd->count), |
| list_type_opc); |
| |
| exit: |
| return status; |
| } |
| |
| /** |
| * i40e_aq_update_nvm |
| * @hw: pointer to the hw struct |
| * @module_pointer: module pointer location in words from the NVM beginning |
| * @offset: byte offset from the module beginning |
| * @length: length of the section to be written (in bytes from the offset) |
| * @data: command buffer (size [bytes] = length) |
| * @last_command: tells if this is the last command in a series |
| * @preservation_flags: Preservation mode flags |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Update the NVM using the admin queue commands |
| **/ |
| i40e_status i40e_aq_update_nvm(struct i40e_hw *hw, u8 module_pointer, |
| u32 offset, u16 length, void *data, |
| bool last_command, u8 preservation_flags, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_nvm_update *cmd = |
| (struct i40e_aqc_nvm_update *)&desc.params.raw; |
| i40e_status status; |
| |
| /* In offset the highest byte must be zeroed. */ |
| if (offset & 0xFF000000) { |
| status = I40E_ERR_PARAM; |
| goto i40e_aq_update_nvm_exit; |
| } |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_nvm_update); |
| |
| /* If this is the last command in a series, set the proper flag. */ |
| if (last_command) |
| cmd->command_flags |= I40E_AQ_NVM_LAST_CMD; |
| if (hw->mac.type == I40E_MAC_X722) { |
| if (preservation_flags == I40E_NVM_PRESERVATION_FLAGS_SELECTED) |
| cmd->command_flags |= |
| (I40E_AQ_NVM_PRESERVATION_FLAGS_SELECTED << |
| I40E_AQ_NVM_PRESERVATION_FLAGS_SHIFT); |
| else if (preservation_flags == I40E_NVM_PRESERVATION_FLAGS_ALL) |
| cmd->command_flags |= |
| (I40E_AQ_NVM_PRESERVATION_FLAGS_ALL << |
| I40E_AQ_NVM_PRESERVATION_FLAGS_SHIFT); |
| } |
| cmd->module_pointer = module_pointer; |
| cmd->offset = cpu_to_le32(offset); |
| cmd->length = cpu_to_le16(length); |
| |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| if (length > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, data, length, cmd_details); |
| |
| i40e_aq_update_nvm_exit: |
| return status; |
| } |
| |
| /** |
| * i40e_aq_rearrange_nvm |
| * @hw: pointer to the hw struct |
| * @rearrange_nvm: defines direction of rearrangement |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Rearrange NVM structure, available only for transition FW |
| **/ |
| i40e_status i40e_aq_rearrange_nvm(struct i40e_hw *hw, |
| u8 rearrange_nvm, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aqc_nvm_update *cmd; |
| i40e_status status; |
| struct i40e_aq_desc desc; |
| |
| cmd = (struct i40e_aqc_nvm_update *)&desc.params.raw; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_nvm_update); |
| |
| rearrange_nvm &= (I40E_AQ_NVM_REARRANGE_TO_FLAT | |
| I40E_AQ_NVM_REARRANGE_TO_STRUCT); |
| |
| if (!rearrange_nvm) { |
| status = I40E_ERR_PARAM; |
| goto i40e_aq_rearrange_nvm_exit; |
| } |
| |
| cmd->command_flags |= rearrange_nvm; |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| i40e_aq_rearrange_nvm_exit: |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_lldp_mib |
| * @hw: pointer to the hw struct |
| * @bridge_type: type of bridge requested |
| * @mib_type: Local, Remote or both Local and Remote MIBs |
| * @buff: pointer to a user supplied buffer to store the MIB block |
| * @buff_size: size of the buffer (in bytes) |
| * @local_len : length of the returned Local LLDP MIB |
| * @remote_len: length of the returned Remote LLDP MIB |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Requests the complete LLDP MIB (entire packet). |
| **/ |
| i40e_status i40e_aq_get_lldp_mib(struct i40e_hw *hw, u8 bridge_type, |
| u8 mib_type, void *buff, u16 buff_size, |
| u16 *local_len, u16 *remote_len, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_lldp_get_mib *cmd = |
| (struct i40e_aqc_lldp_get_mib *)&desc.params.raw; |
| struct i40e_aqc_lldp_get_mib *resp = |
| (struct i40e_aqc_lldp_get_mib *)&desc.params.raw; |
| i40e_status status; |
| |
| if (buff_size == 0 || !buff) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_lldp_get_mib); |
| /* Indirect Command */ |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| |
| cmd->type = mib_type & I40E_AQ_LLDP_MIB_TYPE_MASK; |
| cmd->type |= ((bridge_type << I40E_AQ_LLDP_BRIDGE_TYPE_SHIFT) & |
| I40E_AQ_LLDP_BRIDGE_TYPE_MASK); |
| |
| desc.datalen = cpu_to_le16(buff_size); |
| |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (buff_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| status = i40e_asq_send_command(hw, &desc, buff, buff_size, cmd_details); |
| if (!status) { |
| if (local_len != NULL) |
| *local_len = le16_to_cpu(resp->local_len); |
| if (remote_len != NULL) |
| *remote_len = le16_to_cpu(resp->remote_len); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_lldp_mib - Set the LLDP MIB |
| * @hw: pointer to the hw struct |
| * @mib_type: Local, Remote or both Local and Remote MIBs |
| * @buff: pointer to a user supplied buffer to store the MIB block |
| * @buff_size: size of the buffer (in bytes) |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Set the LLDP MIB. |
| **/ |
| enum i40e_status_code |
| i40e_aq_set_lldp_mib(struct i40e_hw *hw, |
| u8 mib_type, void *buff, u16 buff_size, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aqc_lldp_set_local_mib *cmd; |
| enum i40e_status_code status; |
| struct i40e_aq_desc desc; |
| |
| cmd = (struct i40e_aqc_lldp_set_local_mib *)&desc.params.raw; |
| if (buff_size == 0 || !buff) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_lldp_set_local_mib); |
| /* Indirect Command */ |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| if (buff_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| desc.datalen = cpu_to_le16(buff_size); |
| |
| cmd->type = mib_type; |
| cmd->length = cpu_to_le16(buff_size); |
| cmd->address_high = cpu_to_le32(upper_32_bits((uintptr_t)buff)); |
| cmd->address_low = cpu_to_le32(lower_32_bits((uintptr_t)buff)); |
| |
| status = i40e_asq_send_command(hw, &desc, buff, buff_size, cmd_details); |
| return status; |
| } |
| |
| /** |
| * i40e_aq_cfg_lldp_mib_change_event |
| * @hw: pointer to the hw struct |
| * @enable_update: Enable or Disable event posting |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Enable or Disable posting of an event on ARQ when LLDP MIB |
| * associated with the interface changes |
| **/ |
| i40e_status i40e_aq_cfg_lldp_mib_change_event(struct i40e_hw *hw, |
| bool enable_update, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_lldp_update_mib *cmd = |
| (struct i40e_aqc_lldp_update_mib *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_lldp_update_mib); |
| |
| if (!enable_update) |
| cmd->command |= I40E_AQ_LLDP_MIB_UPDATE_DISABLE; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_restore_lldp |
| * @hw: pointer to the hw struct |
| * @setting: pointer to factory setting variable or NULL |
| * @restore: True if factory settings should be restored |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Restore LLDP Agent factory settings if @restore set to True. In other case |
| * only returns factory setting in AQ response. |
| **/ |
| enum i40e_status_code |
| i40e_aq_restore_lldp(struct i40e_hw *hw, u8 *setting, bool restore, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_lldp_restore *cmd = |
| (struct i40e_aqc_lldp_restore *)&desc.params.raw; |
| i40e_status status; |
| |
| if (!(hw->flags & I40E_HW_FLAG_FW_LLDP_PERSISTENT)) { |
| i40e_debug(hw, I40E_DEBUG_ALL, |
| "Restore LLDP not supported by current FW version.\n"); |
| return I40E_ERR_DEVICE_NOT_SUPPORTED; |
| } |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_lldp_restore); |
| |
| if (restore) |
| cmd->command |= I40E_AQ_LLDP_AGENT_RESTORE; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| if (setting) |
| *setting = cmd->command & 1; |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_stop_lldp |
| * @hw: pointer to the hw struct |
| * @shutdown_agent: True if LLDP Agent needs to be Shutdown |
| * @persist: True if stop of LLDP should be persistent across power cycles |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Stop or Shutdown the embedded LLDP Agent |
| **/ |
| i40e_status i40e_aq_stop_lldp(struct i40e_hw *hw, bool shutdown_agent, |
| bool persist, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_lldp_stop *cmd = |
| (struct i40e_aqc_lldp_stop *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_lldp_stop); |
| |
| if (shutdown_agent) |
| cmd->command |= I40E_AQ_LLDP_AGENT_SHUTDOWN; |
| |
| if (persist) { |
| if (hw->flags & I40E_HW_FLAG_FW_LLDP_PERSISTENT) |
| cmd->command |= I40E_AQ_LLDP_AGENT_STOP_PERSIST; |
| else |
| i40e_debug(hw, I40E_DEBUG_ALL, |
| "Persistent Stop LLDP not supported by current FW version.\n"); |
| } |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_start_lldp |
| * @hw: pointer to the hw struct |
| * @persist: True if start of LLDP should be persistent across power cycles |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Start the embedded LLDP Agent on all ports. |
| **/ |
| i40e_status i40e_aq_start_lldp(struct i40e_hw *hw, bool persist, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_lldp_start *cmd = |
| (struct i40e_aqc_lldp_start *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_lldp_start); |
| |
| cmd->command = I40E_AQ_LLDP_AGENT_START; |
| |
| if (persist) { |
| if (hw->flags & I40E_HW_FLAG_FW_LLDP_PERSISTENT) |
| cmd->command |= I40E_AQ_LLDP_AGENT_START_PERSIST; |
| else |
| i40e_debug(hw, I40E_DEBUG_ALL, |
| "Persistent Start LLDP not supported by current FW version.\n"); |
| } |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_set_dcb_parameters |
| * @hw: pointer to the hw struct |
| * @cmd_details: pointer to command details structure or NULL |
| * @dcb_enable: True if DCB configuration needs to be applied |
| * |
| **/ |
| enum i40e_status_code |
| i40e_aq_set_dcb_parameters(struct i40e_hw *hw, bool dcb_enable, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_set_dcb_parameters *cmd = |
| (struct i40e_aqc_set_dcb_parameters *)&desc.params.raw; |
| i40e_status status; |
| |
| if (!(hw->flags & I40E_HW_FLAG_FW_LLDP_STOPPABLE)) |
| return I40E_ERR_DEVICE_NOT_SUPPORTED; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_dcb_parameters); |
| |
| if (dcb_enable) { |
| cmd->valid_flags = I40E_DCB_VALID; |
| cmd->command = I40E_AQ_DCB_SET_AGENT; |
| } |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_cee_dcb_config |
| * @hw: pointer to the hw struct |
| * @buff: response buffer that stores CEE operational configuration |
| * @buff_size: size of the buffer passed |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Get CEE DCBX mode operational configuration from firmware |
| **/ |
| i40e_status i40e_aq_get_cee_dcb_config(struct i40e_hw *hw, |
| void *buff, u16 buff_size, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| i40e_status status; |
| |
| if (buff_size == 0 || !buff) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_get_cee_dcb_cfg); |
| |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| status = i40e_asq_send_command(hw, &desc, (void *)buff, buff_size, |
| cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_add_udp_tunnel |
| * @hw: pointer to the hw struct |
| * @udp_port: the UDP port to add in Host byte order |
| * @protocol_index: protocol index type |
| * @filter_index: pointer to filter index |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Note: Firmware expects the udp_port value to be in Little Endian format, |
| * and this function will call cpu_to_le16 to convert from Host byte order to |
| * Little Endian order. |
| **/ |
| i40e_status i40e_aq_add_udp_tunnel(struct i40e_hw *hw, |
| u16 udp_port, u8 protocol_index, |
| u8 *filter_index, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_udp_tunnel *cmd = |
| (struct i40e_aqc_add_udp_tunnel *)&desc.params.raw; |
| struct i40e_aqc_del_udp_tunnel_completion *resp = |
| (struct i40e_aqc_del_udp_tunnel_completion *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_add_udp_tunnel); |
| |
| cmd->udp_port = cpu_to_le16(udp_port); |
| cmd->protocol_type = protocol_index; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| if (!status && filter_index) |
| *filter_index = resp->index; |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_del_udp_tunnel |
| * @hw: pointer to the hw struct |
| * @index: filter index |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_del_udp_tunnel(struct i40e_hw *hw, u8 index, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_remove_udp_tunnel *cmd = |
| (struct i40e_aqc_remove_udp_tunnel *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_del_udp_tunnel); |
| |
| cmd->index = index; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_delete_element - Delete switch element |
| * @hw: pointer to the hw struct |
| * @seid: the SEID to delete from the switch |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * This deletes a switch element from the switch. |
| **/ |
| i40e_status i40e_aq_delete_element(struct i40e_hw *hw, u16 seid, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_switch_seid *cmd = |
| (struct i40e_aqc_switch_seid *)&desc.params.raw; |
| i40e_status status; |
| |
| if (seid == 0) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_delete_element); |
| |
| cmd->seid = cpu_to_le16(seid); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_dcb_updated - DCB Updated Command |
| * @hw: pointer to the hw struct |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * EMP will return when the shared RPB settings have been |
| * recomputed and modified. The retval field in the descriptor |
| * will be set to 0 when RPB is modified. |
| **/ |
| i40e_status i40e_aq_dcb_updated(struct i40e_hw *hw, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_dcb_updated); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_tx_sched_cmd - generic Tx scheduler AQ command handler |
| * @hw: pointer to the hw struct |
| * @seid: seid for the physical port/switching component/vsi |
| * @buff: Indirect buffer to hold data parameters and response |
| * @buff_size: Indirect buffer size |
| * @opcode: Tx scheduler AQ command opcode |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Generic command handler for Tx scheduler AQ commands |
| **/ |
| static i40e_status i40e_aq_tx_sched_cmd(struct i40e_hw *hw, u16 seid, |
| void *buff, u16 buff_size, |
| enum i40e_admin_queue_opc opcode, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_tx_sched_ind *cmd = |
| (struct i40e_aqc_tx_sched_ind *)&desc.params.raw; |
| i40e_status status; |
| bool cmd_param_flag = false; |
| |
| switch (opcode) { |
| case i40e_aqc_opc_configure_vsi_ets_sla_bw_limit: |
| case i40e_aqc_opc_configure_vsi_tc_bw: |
| case i40e_aqc_opc_enable_switching_comp_ets: |
| case i40e_aqc_opc_modify_switching_comp_ets: |
| case i40e_aqc_opc_disable_switching_comp_ets: |
| case i40e_aqc_opc_configure_switching_comp_ets_bw_limit: |
| case i40e_aqc_opc_configure_switching_comp_bw_config: |
| cmd_param_flag = true; |
| break; |
| case i40e_aqc_opc_query_vsi_bw_config: |
| case i40e_aqc_opc_query_vsi_ets_sla_config: |
| case i40e_aqc_opc_query_switching_comp_ets_config: |
| case i40e_aqc_opc_query_port_ets_config: |
| case i40e_aqc_opc_query_switching_comp_bw_config: |
| cmd_param_flag = false; |
| break; |
| default: |
| return I40E_ERR_PARAM; |
| } |
| |
| i40e_fill_default_direct_cmd_desc(&desc, opcode); |
| |
| /* Indirect command */ |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (cmd_param_flag) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_RD); |
| if (buff_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| desc.datalen = cpu_to_le16(buff_size); |
| |
| cmd->vsi_seid = cpu_to_le16(seid); |
| |
| status = i40e_asq_send_command(hw, &desc, buff, buff_size, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_config_vsi_bw_limit - Configure VSI BW Limit |
| * @hw: pointer to the hw struct |
| * @seid: VSI seid |
| * @credit: BW limit credits (0 = disabled) |
| * @max_credit: Max BW limit credits |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_config_vsi_bw_limit(struct i40e_hw *hw, |
| u16 seid, u16 credit, u8 max_credit, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_configure_vsi_bw_limit *cmd = |
| (struct i40e_aqc_configure_vsi_bw_limit *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_configure_vsi_bw_limit); |
| |
| cmd->vsi_seid = cpu_to_le16(seid); |
| cmd->credit = cpu_to_le16(credit); |
| cmd->max_credit = max_credit; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_config_vsi_tc_bw - Config VSI BW Allocation per TC |
| * @hw: pointer to the hw struct |
| * @seid: VSI seid |
| * @bw_data: Buffer holding enabled TCs, relative TC BW limit/credits |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_config_vsi_tc_bw(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_configure_vsi_tc_bw_data *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_configure_vsi_tc_bw, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_aq_config_switch_comp_ets - Enable/Disable/Modify ETS on the port |
| * @hw: pointer to the hw struct |
| * @seid: seid of the switching component connected to Physical Port |
| * @ets_data: Buffer holding ETS parameters |
| * @opcode: Tx scheduler AQ command opcode |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_config_switch_comp_ets(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_configure_switching_comp_ets_data *ets_data, |
| enum i40e_admin_queue_opc opcode, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)ets_data, |
| sizeof(*ets_data), opcode, cmd_details); |
| } |
| |
| /** |
| * i40e_aq_config_switch_comp_bw_config - Config Switch comp BW Alloc per TC |
| * @hw: pointer to the hw struct |
| * @seid: seid of the switching component |
| * @bw_data: Buffer holding enabled TCs, relative/absolute TC BW limit/credits |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_config_switch_comp_bw_config(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_configure_switching_comp_bw_config_data *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_configure_switching_comp_bw_config, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_aq_query_vsi_bw_config - Query VSI BW configuration |
| * @hw: pointer to the hw struct |
| * @seid: seid of the VSI |
| * @bw_data: Buffer to hold VSI BW configuration |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_query_vsi_bw_config(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_query_vsi_bw_config_resp *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_query_vsi_bw_config, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_aq_query_vsi_ets_sla_config - Query VSI BW configuration per TC |
| * @hw: pointer to the hw struct |
| * @seid: seid of the VSI |
| * @bw_data: Buffer to hold VSI BW configuration per TC |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_query_vsi_ets_sla_config(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_query_vsi_ets_sla_config_resp *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_query_vsi_ets_sla_config, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_aq_query_switch_comp_ets_config - Query Switch comp BW config per TC |
| * @hw: pointer to the hw struct |
| * @seid: seid of the switching component |
| * @bw_data: Buffer to hold switching component's per TC BW config |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_query_switch_comp_ets_config(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_query_switching_comp_ets_config_resp *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_query_switching_comp_ets_config, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_aq_query_port_ets_config - Query Physical Port ETS configuration |
| * @hw: pointer to the hw struct |
| * @seid: seid of the VSI or switching component connected to Physical Port |
| * @bw_data: Buffer to hold current ETS configuration for the Physical Port |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_query_port_ets_config(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_query_port_ets_config_resp *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_query_port_ets_config, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_aq_query_switch_comp_bw_config - Query Switch comp BW configuration |
| * @hw: pointer to the hw struct |
| * @seid: seid of the switching component |
| * @bw_data: Buffer to hold switching component's BW configuration |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| i40e_status i40e_aq_query_switch_comp_bw_config(struct i40e_hw *hw, |
| u16 seid, |
| struct i40e_aqc_query_switching_comp_bw_config_resp *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| return i40e_aq_tx_sched_cmd(hw, seid, (void *)bw_data, sizeof(*bw_data), |
| i40e_aqc_opc_query_switching_comp_bw_config, |
| cmd_details); |
| } |
| |
| /** |
| * i40e_validate_filter_settings |
| * @hw: pointer to the hardware structure |
| * @settings: Filter control settings |
| * |
| * Check and validate the filter control settings passed. |
| * The function checks for the valid filter/context sizes being |
| * passed for FCoE and PE. |
| * |
| * Returns 0 if the values passed are valid and within |
| * range else returns an error. |
| **/ |
| static i40e_status i40e_validate_filter_settings(struct i40e_hw *hw, |
| struct i40e_filter_control_settings *settings) |
| { |
| u32 fcoe_cntx_size, fcoe_filt_size; |
| u32 pe_cntx_size, pe_filt_size; |
| u32 fcoe_fmax; |
| u32 val; |
| |
| /* Validate FCoE settings passed */ |
| switch (settings->fcoe_filt_num) { |
| case I40E_HASH_FILTER_SIZE_1K: |
| case I40E_HASH_FILTER_SIZE_2K: |
| case I40E_HASH_FILTER_SIZE_4K: |
| case I40E_HASH_FILTER_SIZE_8K: |
| case I40E_HASH_FILTER_SIZE_16K: |
| case I40E_HASH_FILTER_SIZE_32K: |
| fcoe_filt_size = I40E_HASH_FILTER_BASE_SIZE; |
| fcoe_filt_size <<= (u32)settings->fcoe_filt_num; |
| break; |
| default: |
| return I40E_ERR_PARAM; |
| } |
| |
| switch (settings->fcoe_cntx_num) { |
| case I40E_DMA_CNTX_SIZE_512: |
| case I40E_DMA_CNTX_SIZE_1K: |
| case I40E_DMA_CNTX_SIZE_2K: |
| case I40E_DMA_CNTX_SIZE_4K: |
| fcoe_cntx_size = I40E_DMA_CNTX_BASE_SIZE; |
| fcoe_cntx_size <<= (u32)settings->fcoe_cntx_num; |
| break; |
| default: |
| return I40E_ERR_PARAM; |
| } |
| |
| /* Validate PE settings passed */ |
| switch (settings->pe_filt_num) { |
| case I40E_HASH_FILTER_SIZE_1K: |
| case I40E_HASH_FILTER_SIZE_2K: |
| case I40E_HASH_FILTER_SIZE_4K: |
| case I40E_HASH_FILTER_SIZE_8K: |
| case I40E_HASH_FILTER_SIZE_16K: |
| case I40E_HASH_FILTER_SIZE_32K: |
| case I40E_HASH_FILTER_SIZE_64K: |
| case I40E_HASH_FILTER_SIZE_128K: |
| case I40E_HASH_FILTER_SIZE_256K: |
| case I40E_HASH_FILTER_SIZE_512K: |
| case I40E_HASH_FILTER_SIZE_1M: |
| pe_filt_size = I40E_HASH_FILTER_BASE_SIZE; |
| pe_filt_size <<= (u32)settings->pe_filt_num; |
| break; |
| default: |
| return I40E_ERR_PARAM; |
| } |
| |
| switch (settings->pe_cntx_num) { |
| case I40E_DMA_CNTX_SIZE_512: |
| case I40E_DMA_CNTX_SIZE_1K: |
| case I40E_DMA_CNTX_SIZE_2K: |
| case I40E_DMA_CNTX_SIZE_4K: |
| case I40E_DMA_CNTX_SIZE_8K: |
| case I40E_DMA_CNTX_SIZE_16K: |
| case I40E_DMA_CNTX_SIZE_32K: |
| case I40E_DMA_CNTX_SIZE_64K: |
| case I40E_DMA_CNTX_SIZE_128K: |
| case I40E_DMA_CNTX_SIZE_256K: |
| pe_cntx_size = I40E_DMA_CNTX_BASE_SIZE; |
| pe_cntx_size <<= (u32)settings->pe_cntx_num; |
| break; |
| default: |
| return I40E_ERR_PARAM; |
| } |
| |
| /* FCHSIZE + FCDSIZE should not be greater than PMFCOEFMAX */ |
| val = rd32(hw, I40E_GLHMC_FCOEFMAX); |
| fcoe_fmax = (val & I40E_GLHMC_FCOEFMAX_PMFCOEFMAX_MASK) |
| >> I40E_GLHMC_FCOEFMAX_PMFCOEFMAX_SHIFT; |
| if (fcoe_filt_size + fcoe_cntx_size > fcoe_fmax) |
| return I40E_ERR_INVALID_SIZE; |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_set_filter_control |
| * @hw: pointer to the hardware structure |
| * @settings: Filter control settings |
| * |
| * Set the Queue Filters for PE/FCoE and enable filters required |
| * for a single PF. It is expected that these settings are programmed |
| * at the driver initialization time. |
| **/ |
| i40e_status i40e_set_filter_control(struct i40e_hw *hw, |
| struct i40e_filter_control_settings *settings) |
| { |
| i40e_status ret = 0; |
| u32 hash_lut_size = 0; |
| u32 val; |
| |
| if (!settings) |
| return I40E_ERR_PARAM; |
| |
| /* Validate the input settings */ |
| ret = i40e_validate_filter_settings(hw, settings); |
| if (ret) |
| return ret; |
| |
| /* Read the PF Queue Filter control register */ |
| val = i40e_read_rx_ctl(hw, I40E_PFQF_CTL_0); |
| |
| /* Program required PE hash buckets for the PF */ |
| val &= ~I40E_PFQF_CTL_0_PEHSIZE_MASK; |
| val |= ((u32)settings->pe_filt_num << I40E_PFQF_CTL_0_PEHSIZE_SHIFT) & |
| I40E_PFQF_CTL_0_PEHSIZE_MASK; |
| /* Program required PE contexts for the PF */ |
| val &= ~I40E_PFQF_CTL_0_PEDSIZE_MASK; |
| val |= ((u32)settings->pe_cntx_num << I40E_PFQF_CTL_0_PEDSIZE_SHIFT) & |
| I40E_PFQF_CTL_0_PEDSIZE_MASK; |
| |
| /* Program required FCoE hash buckets for the PF */ |
| val &= ~I40E_PFQF_CTL_0_PFFCHSIZE_MASK; |
| val |= ((u32)settings->fcoe_filt_num << |
| I40E_PFQF_CTL_0_PFFCHSIZE_SHIFT) & |
| I40E_PFQF_CTL_0_PFFCHSIZE_MASK; |
| /* Program required FCoE DDP contexts for the PF */ |
| val &= ~I40E_PFQF_CTL_0_PFFCDSIZE_MASK; |
| val |= ((u32)settings->fcoe_cntx_num << |
| I40E_PFQF_CTL_0_PFFCDSIZE_SHIFT) & |
| I40E_PFQF_CTL_0_PFFCDSIZE_MASK; |
| |
| /* Program Hash LUT size for the PF */ |
| val &= ~I40E_PFQF_CTL_0_HASHLUTSIZE_MASK; |
| if (settings->hash_lut_size == I40E_HASH_LUT_SIZE_512) |
| hash_lut_size = 1; |
| val |= (hash_lut_size << I40E_PFQF_CTL_0_HASHLUTSIZE_SHIFT) & |
| I40E_PFQF_CTL_0_HASHLUTSIZE_MASK; |
| |
| /* Enable FDIR, Ethertype and MACVLAN filters for PF and VFs */ |
| if (settings->enable_fdir) |
| val |= I40E_PFQF_CTL_0_FD_ENA_MASK; |
| if (settings->enable_ethtype) |
| val |= I40E_PFQF_CTL_0_ETYPE_ENA_MASK; |
| if (settings->enable_macvlan) |
| val |= I40E_PFQF_CTL_0_MACVLAN_ENA_MASK; |
| |
| i40e_write_rx_ctl(hw, I40E_PFQF_CTL_0, val); |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_aq_add_rem_control_packet_filter - Add or Remove Control Packet Filter |
| * @hw: pointer to the hw struct |
| * @mac_addr: MAC address to use in the filter |
| * @ethtype: Ethertype to use in the filter |
| * @flags: Flags that needs to be applied to the filter |
| * @vsi_seid: seid of the control VSI |
| * @queue: VSI queue number to send the packet to |
| * @is_add: Add control packet filter if True else remove |
| * @stats: Structure to hold information on control filter counts |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * This command will Add or Remove control packet filter for a control VSI. |
| * In return it will update the total number of perfect filter count in |
| * the stats member. |
| **/ |
| i40e_status i40e_aq_add_rem_control_packet_filter(struct i40e_hw *hw, |
| u8 *mac_addr, u16 ethtype, u16 flags, |
| u16 vsi_seid, u16 queue, bool is_add, |
| struct i40e_control_filter_stats *stats, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_remove_control_packet_filter *cmd = |
| (struct i40e_aqc_add_remove_control_packet_filter *) |
| &desc.params.raw; |
| struct i40e_aqc_add_remove_control_packet_filter_completion *resp = |
| (struct i40e_aqc_add_remove_control_packet_filter_completion *) |
| &desc.params.raw; |
| i40e_status status; |
| |
| if (vsi_seid == 0) |
| return I40E_ERR_PARAM; |
| |
| if (is_add) { |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_add_control_packet_filter); |
| cmd->queue = cpu_to_le16(queue); |
| } else { |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_remove_control_packet_filter); |
| } |
| |
| if (mac_addr) |
| ether_addr_copy(cmd->mac, mac_addr); |
| |
| cmd->etype = cpu_to_le16(ethtype); |
| cmd->flags = cpu_to_le16(flags); |
| cmd->seid = cpu_to_le16(vsi_seid); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| if (!status && stats) { |
| stats->mac_etype_used = le16_to_cpu(resp->mac_etype_used); |
| stats->etype_used = le16_to_cpu(resp->etype_used); |
| stats->mac_etype_free = le16_to_cpu(resp->mac_etype_free); |
| stats->etype_free = le16_to_cpu(resp->etype_free); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_add_filter_to_drop_tx_flow_control_frames- filter to drop flow control |
| * @hw: pointer to the hw struct |
| * @seid: VSI seid to add ethertype filter from |
| **/ |
| void i40e_add_filter_to_drop_tx_flow_control_frames(struct i40e_hw *hw, |
| u16 seid) |
| { |
| #define I40E_FLOW_CONTROL_ETHTYPE 0x8808 |
| u16 flag = I40E_AQC_ADD_CONTROL_PACKET_FLAGS_IGNORE_MAC | |
| I40E_AQC_ADD_CONTROL_PACKET_FLAGS_DROP | |
| I40E_AQC_ADD_CONTROL_PACKET_FLAGS_TX; |
| u16 ethtype = I40E_FLOW_CONTROL_ETHTYPE; |
| i40e_status status; |
| |
| status = i40e_aq_add_rem_control_packet_filter(hw, NULL, ethtype, flag, |
| seid, 0, true, NULL, |
| NULL); |
| if (status) |
| hw_dbg(hw, "Ethtype Filter Add failed: Error pruning Tx flow control frames\n"); |
| } |
| |
| /** |
| * i40e_aq_alternate_read |
| * @hw: pointer to the hardware structure |
| * @reg_addr0: address of first dword to be read |
| * @reg_val0: pointer for data read from 'reg_addr0' |
| * @reg_addr1: address of second dword to be read |
| * @reg_val1: pointer for data read from 'reg_addr1' |
| * |
| * Read one or two dwords from alternate structure. Fields are indicated |
| * by 'reg_addr0' and 'reg_addr1' register numbers. If 'reg_val1' pointer |
| * is not passed then only register at 'reg_addr0' is read. |
| * |
| **/ |
| static i40e_status i40e_aq_alternate_read(struct i40e_hw *hw, |
| u32 reg_addr0, u32 *reg_val0, |
| u32 reg_addr1, u32 *reg_val1) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_alternate_write *cmd_resp = |
| (struct i40e_aqc_alternate_write *)&desc.params.raw; |
| i40e_status status; |
| |
| if (!reg_val0) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_alternate_read); |
| cmd_resp->address0 = cpu_to_le32(reg_addr0); |
| cmd_resp->address1 = cpu_to_le32(reg_addr1); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, NULL); |
| |
| if (!status) { |
| *reg_val0 = le32_to_cpu(cmd_resp->data0); |
| |
| if (reg_val1) |
| *reg_val1 = le32_to_cpu(cmd_resp->data1); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_suspend_port_tx |
| * @hw: pointer to the hardware structure |
| * @seid: port seid |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Suspend port's Tx traffic |
| **/ |
| i40e_status i40e_aq_suspend_port_tx(struct i40e_hw *hw, u16 seid, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aqc_tx_sched_ind *cmd; |
| struct i40e_aq_desc desc; |
| i40e_status status; |
| |
| cmd = (struct i40e_aqc_tx_sched_ind *)&desc.params.raw; |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_suspend_port_tx); |
| cmd->vsi_seid = cpu_to_le16(seid); |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_resume_port_tx |
| * @hw: pointer to the hardware structure |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Resume port's Tx traffic |
| **/ |
| i40e_status i40e_aq_resume_port_tx(struct i40e_hw *hw, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_resume_port_tx); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_set_pci_config_data - store PCI bus info |
| * @hw: pointer to hardware structure |
| * @link_status: the link status word from PCI config space |
| * |
| * Stores the PCI bus info (speed, width, type) within the i40e_hw structure |
| **/ |
| void i40e_set_pci_config_data(struct i40e_hw *hw, u16 link_status) |
| { |
| hw->bus.type = i40e_bus_type_pci_express; |
| |
| switch (link_status & PCI_EXP_LNKSTA_NLW) { |
| case PCI_EXP_LNKSTA_NLW_X1: |
| hw->bus.width = i40e_bus_width_pcie_x1; |
| break; |
| case PCI_EXP_LNKSTA_NLW_X2: |
| hw->bus.width = i40e_bus_width_pcie_x2; |
| break; |
| case PCI_EXP_LNKSTA_NLW_X4: |
| hw->bus.width = i40e_bus_width_pcie_x4; |
| break; |
| case PCI_EXP_LNKSTA_NLW_X8: |
| hw->bus.width = i40e_bus_width_pcie_x8; |
| break; |
| default: |
| hw->bus.width = i40e_bus_width_unknown; |
| break; |
| } |
| |
| switch (link_status & PCI_EXP_LNKSTA_CLS) { |
| case PCI_EXP_LNKSTA_CLS_2_5GB: |
| hw->bus.speed = i40e_bus_speed_2500; |
| break; |
| case PCI_EXP_LNKSTA_CLS_5_0GB: |
| hw->bus.speed = i40e_bus_speed_5000; |
| break; |
| case PCI_EXP_LNKSTA_CLS_8_0GB: |
| hw->bus.speed = i40e_bus_speed_8000; |
| break; |
| default: |
| hw->bus.speed = i40e_bus_speed_unknown; |
| break; |
| } |
| } |
| |
| /** |
| * i40e_aq_debug_dump |
| * @hw: pointer to the hardware structure |
| * @cluster_id: specific cluster to dump |
| * @table_id: table id within cluster |
| * @start_index: index of line in the block to read |
| * @buff_size: dump buffer size |
| * @buff: dump buffer |
| * @ret_buff_size: actual buffer size returned |
| * @ret_next_table: next block to read |
| * @ret_next_index: next index to read |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Dump internal FW/HW data for debug purposes. |
| * |
| **/ |
| i40e_status i40e_aq_debug_dump(struct i40e_hw *hw, u8 cluster_id, |
| u8 table_id, u32 start_index, u16 buff_size, |
| void *buff, u16 *ret_buff_size, |
| u8 *ret_next_table, u32 *ret_next_index, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_debug_dump_internals *cmd = |
| (struct i40e_aqc_debug_dump_internals *)&desc.params.raw; |
| struct i40e_aqc_debug_dump_internals *resp = |
| (struct i40e_aqc_debug_dump_internals *)&desc.params.raw; |
| i40e_status status; |
| |
| if (buff_size == 0 || !buff) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_debug_dump_internals); |
| /* Indirect Command */ |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (buff_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| cmd->cluster_id = cluster_id; |
| cmd->table_id = table_id; |
| cmd->idx = cpu_to_le32(start_index); |
| |
| desc.datalen = cpu_to_le16(buff_size); |
| |
| status = i40e_asq_send_command(hw, &desc, buff, buff_size, cmd_details); |
| if (!status) { |
| if (ret_buff_size) |
| *ret_buff_size = le16_to_cpu(desc.datalen); |
| if (ret_next_table) |
| *ret_next_table = resp->table_id; |
| if (ret_next_index) |
| *ret_next_index = le32_to_cpu(resp->idx); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_read_bw_from_alt_ram |
| * @hw: pointer to the hardware structure |
| * @max_bw: pointer for max_bw read |
| * @min_bw: pointer for min_bw read |
| * @min_valid: pointer for bool that is true if min_bw is a valid value |
| * @max_valid: pointer for bool that is true if max_bw is a valid value |
| * |
| * Read bw from the alternate ram for the given pf |
| **/ |
| i40e_status i40e_read_bw_from_alt_ram(struct i40e_hw *hw, |
| u32 *max_bw, u32 *min_bw, |
| bool *min_valid, bool *max_valid) |
| { |
| i40e_status status; |
| u32 max_bw_addr, min_bw_addr; |
| |
| /* Calculate the address of the min/max bw registers */ |
| max_bw_addr = I40E_ALT_STRUCT_FIRST_PF_OFFSET + |
| I40E_ALT_STRUCT_MAX_BW_OFFSET + |
| (I40E_ALT_STRUCT_DWORDS_PER_PF * hw->pf_id); |
| min_bw_addr = I40E_ALT_STRUCT_FIRST_PF_OFFSET + |
| I40E_ALT_STRUCT_MIN_BW_OFFSET + |
| (I40E_ALT_STRUCT_DWORDS_PER_PF * hw->pf_id); |
| |
| /* Read the bandwidths from alt ram */ |
| status = i40e_aq_alternate_read(hw, max_bw_addr, max_bw, |
| min_bw_addr, min_bw); |
| |
| if (*min_bw & I40E_ALT_BW_VALID_MASK) |
| *min_valid = true; |
| else |
| *min_valid = false; |
| |
| if (*max_bw & I40E_ALT_BW_VALID_MASK) |
| *max_valid = true; |
| else |
| *max_valid = false; |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_configure_partition_bw |
| * @hw: pointer to the hardware structure |
| * @bw_data: Buffer holding valid pfs and bw limits |
| * @cmd_details: pointer to command details |
| * |
| * Configure partitions guaranteed/max bw |
| **/ |
| i40e_status i40e_aq_configure_partition_bw(struct i40e_hw *hw, |
| struct i40e_aqc_configure_partition_bw_data *bw_data, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| i40e_status status; |
| struct i40e_aq_desc desc; |
| u16 bwd_size = sizeof(*bw_data); |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_configure_partition_bw); |
| |
| /* Indirect command */ |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_RD); |
| |
| if (bwd_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| desc.datalen = cpu_to_le16(bwd_size); |
| |
| status = i40e_asq_send_command(hw, &desc, bw_data, bwd_size, |
| cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_read_phy_register_clause22 |
| * @hw: pointer to the HW structure |
| * @reg: register address in the page |
| * @phy_addr: PHY address on MDIO interface |
| * @value: PHY register value |
| * |
| * Reads specified PHY register value |
| **/ |
| i40e_status i40e_read_phy_register_clause22(struct i40e_hw *hw, |
| u16 reg, u8 phy_addr, u16 *value) |
| { |
| i40e_status status = I40E_ERR_TIMEOUT; |
| u8 port_num = (u8)hw->func_caps.mdio_port_num; |
| u32 command = 0; |
| u16 retry = 1000; |
| |
| command = (reg << I40E_GLGEN_MSCA_DEVADD_SHIFT) | |
| (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) | |
| (I40E_MDIO_CLAUSE22_OPCODE_READ_MASK) | |
| (I40E_MDIO_CLAUSE22_STCODE_MASK) | |
| (I40E_GLGEN_MSCA_MDICMD_MASK); |
| wr32(hw, I40E_GLGEN_MSCA(port_num), command); |
| do { |
| command = rd32(hw, I40E_GLGEN_MSCA(port_num)); |
| if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) { |
| status = 0; |
| break; |
| } |
| udelay(10); |
| retry--; |
| } while (retry); |
| |
| if (status) { |
| i40e_debug(hw, I40E_DEBUG_PHY, |
| "PHY: Can't write command to external PHY.\n"); |
| } else { |
| command = rd32(hw, I40E_GLGEN_MSRWD(port_num)); |
| *value = (command & I40E_GLGEN_MSRWD_MDIRDDATA_MASK) >> |
| I40E_GLGEN_MSRWD_MDIRDDATA_SHIFT; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_write_phy_register_clause22 |
| * @hw: pointer to the HW structure |
| * @reg: register address in the page |
| * @phy_addr: PHY address on MDIO interface |
| * @value: PHY register value |
| * |
| * Writes specified PHY register value |
| **/ |
| i40e_status i40e_write_phy_register_clause22(struct i40e_hw *hw, |
| u16 reg, u8 phy_addr, u16 value) |
| { |
| i40e_status status = I40E_ERR_TIMEOUT; |
| u8 port_num = (u8)hw->func_caps.mdio_port_num; |
| u32 command = 0; |
| u16 retry = 1000; |
| |
| command = value << I40E_GLGEN_MSRWD_MDIWRDATA_SHIFT; |
| wr32(hw, I40E_GLGEN_MSRWD(port_num), command); |
| |
| command = (reg << I40E_GLGEN_MSCA_DEVADD_SHIFT) | |
| (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) | |
| (I40E_MDIO_CLAUSE22_OPCODE_WRITE_MASK) | |
| (I40E_MDIO_CLAUSE22_STCODE_MASK) | |
| (I40E_GLGEN_MSCA_MDICMD_MASK); |
| |
| wr32(hw, I40E_GLGEN_MSCA(port_num), command); |
| do { |
| command = rd32(hw, I40E_GLGEN_MSCA(port_num)); |
| if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) { |
| status = 0; |
| break; |
| } |
| udelay(10); |
| retry--; |
| } while (retry); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_read_phy_register_clause45 |
| * @hw: pointer to the HW structure |
| * @page: registers page number |
| * @reg: register address in the page |
| * @phy_addr: PHY address on MDIO interface |
| * @value: PHY register value |
| * |
| * Reads specified PHY register value |
| **/ |
| i40e_status i40e_read_phy_register_clause45(struct i40e_hw *hw, |
| u8 page, u16 reg, u8 phy_addr, u16 *value) |
| { |
| i40e_status status = I40E_ERR_TIMEOUT; |
| u32 command = 0; |
| u16 retry = 1000; |
| u8 port_num = hw->func_caps.mdio_port_num; |
| |
| command = (reg << I40E_GLGEN_MSCA_MDIADD_SHIFT) | |
| (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) | |
| (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) | |
| (I40E_MDIO_CLAUSE45_OPCODE_ADDRESS_MASK) | |
| (I40E_MDIO_CLAUSE45_STCODE_MASK) | |
| (I40E_GLGEN_MSCA_MDICMD_MASK) | |
| (I40E_GLGEN_MSCA_MDIINPROGEN_MASK); |
| wr32(hw, I40E_GLGEN_MSCA(port_num), command); |
| do { |
| command = rd32(hw, I40E_GLGEN_MSCA(port_num)); |
| if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) { |
| status = 0; |
| break; |
| } |
| usleep_range(10, 20); |
| retry--; |
| } while (retry); |
| |
| if (status) { |
| i40e_debug(hw, I40E_DEBUG_PHY, |
| "PHY: Can't write command to external PHY.\n"); |
| goto phy_read_end; |
| } |
| |
| command = (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) | |
| (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) | |
| (I40E_MDIO_CLAUSE45_OPCODE_READ_MASK) | |
| (I40E_MDIO_CLAUSE45_STCODE_MASK) | |
| (I40E_GLGEN_MSCA_MDICMD_MASK) | |
| (I40E_GLGEN_MSCA_MDIINPROGEN_MASK); |
| status = I40E_ERR_TIMEOUT; |
| retry = 1000; |
| wr32(hw, I40E_GLGEN_MSCA(port_num), command); |
| do { |
| command = rd32(hw, I40E_GLGEN_MSCA(port_num)); |
| if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) { |
| status = 0; |
| break; |
| } |
| usleep_range(10, 20); |
| retry--; |
| } while (retry); |
| |
| if (!status) { |
| command = rd32(hw, I40E_GLGEN_MSRWD(port_num)); |
| *value = (command & I40E_GLGEN_MSRWD_MDIRDDATA_MASK) >> |
| I40E_GLGEN_MSRWD_MDIRDDATA_SHIFT; |
| } else { |
| i40e_debug(hw, I40E_DEBUG_PHY, |
| "PHY: Can't read register value from external PHY.\n"); |
| } |
| |
| phy_read_end: |
| return status; |
| } |
| |
| /** |
| * i40e_write_phy_register_clause45 |
| * @hw: pointer to the HW structure |
| * @page: registers page number |
| * @reg: register address in the page |
| * @phy_addr: PHY address on MDIO interface |
| * @value: PHY register value |
| * |
| * Writes value to specified PHY register |
| **/ |
| i40e_status i40e_write_phy_register_clause45(struct i40e_hw *hw, |
| u8 page, u16 reg, u8 phy_addr, u16 value) |
| { |
| i40e_status status = I40E_ERR_TIMEOUT; |
| u32 command = 0; |
| u16 retry = 1000; |
| u8 port_num = hw->func_caps.mdio_port_num; |
| |
| command = (reg << I40E_GLGEN_MSCA_MDIADD_SHIFT) | |
| (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) | |
| (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) | |
| (I40E_MDIO_CLAUSE45_OPCODE_ADDRESS_MASK) | |
| (I40E_MDIO_CLAUSE45_STCODE_MASK) | |
| (I40E_GLGEN_MSCA_MDICMD_MASK) | |
| (I40E_GLGEN_MSCA_MDIINPROGEN_MASK); |
| wr32(hw, I40E_GLGEN_MSCA(port_num), command); |
| do { |
| command = rd32(hw, I40E_GLGEN_MSCA(port_num)); |
| if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) { |
| status = 0; |
| break; |
| } |
| usleep_range(10, 20); |
| retry--; |
| } while (retry); |
| if (status) { |
| i40e_debug(hw, I40E_DEBUG_PHY, |
| "PHY: Can't write command to external PHY.\n"); |
| goto phy_write_end; |
| } |
| |
| command = value << I40E_GLGEN_MSRWD_MDIWRDATA_SHIFT; |
| wr32(hw, I40E_GLGEN_MSRWD(port_num), command); |
| |
| command = (page << I40E_GLGEN_MSCA_DEVADD_SHIFT) | |
| (phy_addr << I40E_GLGEN_MSCA_PHYADD_SHIFT) | |
| (I40E_MDIO_CLAUSE45_OPCODE_WRITE_MASK) | |
| (I40E_MDIO_CLAUSE45_STCODE_MASK) | |
| (I40E_GLGEN_MSCA_MDICMD_MASK) | |
| (I40E_GLGEN_MSCA_MDIINPROGEN_MASK); |
| status = I40E_ERR_TIMEOUT; |
| retry = 1000; |
| wr32(hw, I40E_GLGEN_MSCA(port_num), command); |
| do { |
| command = rd32(hw, I40E_GLGEN_MSCA(port_num)); |
| if (!(command & I40E_GLGEN_MSCA_MDICMD_MASK)) { |
| status = 0; |
| break; |
| } |
| usleep_range(10, 20); |
| retry--; |
| } while (retry); |
| |
| phy_write_end: |
| return status; |
| } |
| |
| /** |
| * i40e_write_phy_register |
| * @hw: pointer to the HW structure |
| * @page: registers page number |
| * @reg: register address in the page |
| * @phy_addr: PHY address on MDIO interface |
| * @value: PHY register value |
| * |
| * Writes value to specified PHY register |
| **/ |
| i40e_status i40e_write_phy_register(struct i40e_hw *hw, |
| u8 page, u16 reg, u8 phy_addr, u16 value) |
| { |
| i40e_status status; |
| |
| switch (hw->device_id) { |
| case I40E_DEV_ID_1G_BASE_T_X722: |
| status = i40e_write_phy_register_clause22(hw, reg, phy_addr, |
| value); |
| break; |
| case I40E_DEV_ID_5G_BASE_T_BC: |
| case I40E_DEV_ID_10G_BASE_T: |
| case I40E_DEV_ID_10G_BASE_T4: |
| case I40E_DEV_ID_10G_BASE_T_BC: |
| case I40E_DEV_ID_10G_BASE_T_X722: |
| case I40E_DEV_ID_25G_B: |
| case I40E_DEV_ID_25G_SFP28: |
| status = i40e_write_phy_register_clause45(hw, page, reg, |
| phy_addr, value); |
| break; |
| default: |
| status = I40E_ERR_UNKNOWN_PHY; |
| break; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_read_phy_register |
| * @hw: pointer to the HW structure |
| * @page: registers page number |
| * @reg: register address in the page |
| * @phy_addr: PHY address on MDIO interface |
| * @value: PHY register value |
| * |
| * Reads specified PHY register value |
| **/ |
| i40e_status i40e_read_phy_register(struct i40e_hw *hw, |
| u8 page, u16 reg, u8 phy_addr, u16 *value) |
| { |
| i40e_status status; |
| |
| switch (hw->device_id) { |
| case I40E_DEV_ID_1G_BASE_T_X722: |
| status = i40e_read_phy_register_clause22(hw, reg, phy_addr, |
| value); |
| break; |
| case I40E_DEV_ID_5G_BASE_T_BC: |
| case I40E_DEV_ID_10G_BASE_T: |
| case I40E_DEV_ID_10G_BASE_T4: |
| case I40E_DEV_ID_10G_BASE_T_BC: |
| case I40E_DEV_ID_10G_BASE_T_X722: |
| case I40E_DEV_ID_25G_B: |
| case I40E_DEV_ID_25G_SFP28: |
| status = i40e_read_phy_register_clause45(hw, page, reg, |
| phy_addr, value); |
| break; |
| default: |
| status = I40E_ERR_UNKNOWN_PHY; |
| break; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_get_phy_address |
| * @hw: pointer to the HW structure |
| * @dev_num: PHY port num that address we want |
| * |
| * Gets PHY address for current port |
| **/ |
| u8 i40e_get_phy_address(struct i40e_hw *hw, u8 dev_num) |
| { |
| u8 port_num = hw->func_caps.mdio_port_num; |
| u32 reg_val = rd32(hw, I40E_GLGEN_MDIO_I2C_SEL(port_num)); |
| |
| return (u8)(reg_val >> ((dev_num + 1) * 5)) & 0x1f; |
| } |
| |
| /** |
| * i40e_blink_phy_link_led |
| * @hw: pointer to the HW structure |
| * @time: time how long led will blinks in secs |
| * @interval: gap between LED on and off in msecs |
| * |
| * Blinks PHY link LED |
| **/ |
| i40e_status i40e_blink_phy_link_led(struct i40e_hw *hw, |
| u32 time, u32 interval) |
| { |
| i40e_status status = 0; |
| u32 i; |
| u16 led_ctl; |
| u16 gpio_led_port; |
| u16 led_reg; |
| u16 led_addr = I40E_PHY_LED_PROV_REG_1; |
| u8 phy_addr = 0; |
| u8 port_num; |
| |
| i = rd32(hw, I40E_PFGEN_PORTNUM); |
| port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK); |
| phy_addr = i40e_get_phy_address(hw, port_num); |
| |
| for (gpio_led_port = 0; gpio_led_port < 3; gpio_led_port++, |
| led_addr++) { |
| status = i40e_read_phy_register_clause45(hw, |
| I40E_PHY_COM_REG_PAGE, |
| led_addr, phy_addr, |
| &led_reg); |
| if (status) |
| goto phy_blinking_end; |
| led_ctl = led_reg; |
| if (led_reg & I40E_PHY_LED_LINK_MODE_MASK) { |
| led_reg = 0; |
| status = i40e_write_phy_register_clause45(hw, |
| I40E_PHY_COM_REG_PAGE, |
| led_addr, phy_addr, |
| led_reg); |
| if (status) |
| goto phy_blinking_end; |
| break; |
| } |
| } |
| |
| if (time > 0 && interval > 0) { |
| for (i = 0; i < time * 1000; i += interval) { |
| status = i40e_read_phy_register_clause45(hw, |
| I40E_PHY_COM_REG_PAGE, |
| led_addr, phy_addr, &led_reg); |
| if (status) |
| goto restore_config; |
| if (led_reg & I40E_PHY_LED_MANUAL_ON) |
| led_reg = 0; |
| else |
| led_reg = I40E_PHY_LED_MANUAL_ON; |
| status = i40e_write_phy_register_clause45(hw, |
| I40E_PHY_COM_REG_PAGE, |
| led_addr, phy_addr, led_reg); |
| if (status) |
| goto restore_config; |
| msleep(interval); |
| } |
| } |
| |
| restore_config: |
| status = i40e_write_phy_register_clause45(hw, |
| I40E_PHY_COM_REG_PAGE, |
| led_addr, phy_addr, led_ctl); |
| |
| phy_blinking_end: |
| return status; |
| } |
| |
| /** |
| * i40e_led_get_reg - read LED register |
| * @hw: pointer to the HW structure |
| * @led_addr: LED register address |
| * @reg_val: read register value |
| **/ |
| static enum i40e_status_code i40e_led_get_reg(struct i40e_hw *hw, u16 led_addr, |
| u32 *reg_val) |
| { |
| enum i40e_status_code status; |
| u8 phy_addr = 0; |
| u8 port_num; |
| u32 i; |
| |
| *reg_val = 0; |
| if (hw->flags & I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE) { |
| status = |
| i40e_aq_get_phy_register(hw, |
| I40E_AQ_PHY_REG_ACCESS_EXTERNAL, |
| I40E_PHY_COM_REG_PAGE, true, |
| I40E_PHY_LED_PROV_REG_1, |
| reg_val, NULL); |
| } else { |
| i = rd32(hw, I40E_PFGEN_PORTNUM); |
| port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK); |
| phy_addr = i40e_get_phy_address(hw, port_num); |
| status = i40e_read_phy_register_clause45(hw, |
| I40E_PHY_COM_REG_PAGE, |
| led_addr, phy_addr, |
| (u16 *)reg_val); |
| } |
| return status; |
| } |
| |
| /** |
| * i40e_led_set_reg - write LED register |
| * @hw: pointer to the HW structure |
| * @led_addr: LED register address |
| * @reg_val: register value to write |
| **/ |
| static enum i40e_status_code i40e_led_set_reg(struct i40e_hw *hw, u16 led_addr, |
| u32 reg_val) |
| { |
| enum i40e_status_code status; |
| u8 phy_addr = 0; |
| u8 port_num; |
| u32 i; |
| |
| if (hw->flags & I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE) { |
| status = |
| i40e_aq_set_phy_register(hw, |
| I40E_AQ_PHY_REG_ACCESS_EXTERNAL, |
| I40E_PHY_COM_REG_PAGE, true, |
| I40E_PHY_LED_PROV_REG_1, |
| reg_val, NULL); |
| } else { |
| i = rd32(hw, I40E_PFGEN_PORTNUM); |
| port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK); |
| phy_addr = i40e_get_phy_address(hw, port_num); |
| status = i40e_write_phy_register_clause45(hw, |
| I40E_PHY_COM_REG_PAGE, |
| led_addr, phy_addr, |
| (u16)reg_val); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_led_get_phy - return current on/off mode |
| * @hw: pointer to the hw struct |
| * @led_addr: address of led register to use |
| * @val: original value of register to use |
| * |
| **/ |
| i40e_status i40e_led_get_phy(struct i40e_hw *hw, u16 *led_addr, |
| u16 *val) |
| { |
| i40e_status status = 0; |
| u16 gpio_led_port; |
| u8 phy_addr = 0; |
| u16 reg_val; |
| u16 temp_addr; |
| u8 port_num; |
| u32 i; |
| u32 reg_val_aq; |
| |
| if (hw->flags & I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE) { |
| status = |
| i40e_aq_get_phy_register(hw, |
| I40E_AQ_PHY_REG_ACCESS_EXTERNAL, |
| I40E_PHY_COM_REG_PAGE, true, |
| I40E_PHY_LED_PROV_REG_1, |
| ®_val_aq, NULL); |
| if (status == I40E_SUCCESS) |
| *val = (u16)reg_val_aq; |
| return status; |
| } |
| temp_addr = I40E_PHY_LED_PROV_REG_1; |
| i = rd32(hw, I40E_PFGEN_PORTNUM); |
| port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK); |
| phy_addr = i40e_get_phy_address(hw, port_num); |
| |
| for (gpio_led_port = 0; gpio_led_port < 3; gpio_led_port++, |
| temp_addr++) { |
| status = i40e_read_phy_register_clause45(hw, |
| I40E_PHY_COM_REG_PAGE, |
| temp_addr, phy_addr, |
| ®_val); |
| if (status) |
| return status; |
| *val = reg_val; |
| if (reg_val & I40E_PHY_LED_LINK_MODE_MASK) { |
| *led_addr = temp_addr; |
| break; |
| } |
| } |
| return status; |
| } |
| |
| /** |
| * i40e_led_set_phy |
| * @hw: pointer to the HW structure |
| * @on: true or false |
| * @led_addr: address of led register to use |
| * @mode: original val plus bit for set or ignore |
| * |
| * Set led's on or off when controlled by the PHY |
| * |
| **/ |
| i40e_status i40e_led_set_phy(struct i40e_hw *hw, bool on, |
| u16 led_addr, u32 mode) |
| { |
| i40e_status status = 0; |
| u32 led_ctl = 0; |
| u32 led_reg = 0; |
| |
| status = i40e_led_get_reg(hw, led_addr, &led_reg); |
| if (status) |
| return status; |
| led_ctl = led_reg; |
| if (led_reg & I40E_PHY_LED_LINK_MODE_MASK) { |
| led_reg = 0; |
| status = i40e_led_set_reg(hw, led_addr, led_reg); |
| if (status) |
| return status; |
| } |
| status = i40e_led_get_reg(hw, led_addr, &led_reg); |
| if (status) |
| goto restore_config; |
| if (on) |
| led_reg = I40E_PHY_LED_MANUAL_ON; |
| else |
| led_reg = 0; |
| |
| status = i40e_led_set_reg(hw, led_addr, led_reg); |
| if (status) |
| goto restore_config; |
| if (mode & I40E_PHY_LED_MODE_ORIG) { |
| led_ctl = (mode & I40E_PHY_LED_MODE_MASK); |
| status = i40e_led_set_reg(hw, led_addr, led_ctl); |
| } |
| return status; |
| |
| restore_config: |
| status = i40e_led_set_reg(hw, led_addr, led_ctl); |
| return status; |
| } |
| |
| /** |
| * i40e_aq_rx_ctl_read_register - use FW to read from an Rx control register |
| * @hw: pointer to the hw struct |
| * @reg_addr: register address |
| * @reg_val: ptr to register value |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Use the firmware to read the Rx control register, |
| * especially useful if the Rx unit is under heavy pressure |
| **/ |
| i40e_status i40e_aq_rx_ctl_read_register(struct i40e_hw *hw, |
| u32 reg_addr, u32 *reg_val, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_rx_ctl_reg_read_write *cmd_resp = |
| (struct i40e_aqc_rx_ctl_reg_read_write *)&desc.params.raw; |
| i40e_status status; |
| |
| if (!reg_val) |
| return I40E_ERR_PARAM; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_rx_ctl_reg_read); |
| |
| cmd_resp->address = cpu_to_le32(reg_addr); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| if (status == 0) |
| *reg_val = le32_to_cpu(cmd_resp->value); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_read_rx_ctl - read from an Rx control register |
| * @hw: pointer to the hw struct |
| * @reg_addr: register address |
| **/ |
| u32 i40e_read_rx_ctl(struct i40e_hw *hw, u32 reg_addr) |
| { |
| i40e_status status = 0; |
| bool use_register; |
| int retry = 5; |
| u32 val = 0; |
| |
| use_register = (((hw->aq.api_maj_ver == 1) && |
| (hw->aq.api_min_ver < 5)) || |
| (hw->mac.type == I40E_MAC_X722)); |
| if (!use_register) { |
| do_retry: |
| status = i40e_aq_rx_ctl_read_register(hw, reg_addr, &val, NULL); |
| if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN && retry) { |
| usleep_range(1000, 2000); |
| retry--; |
| goto do_retry; |
| } |
| } |
| |
| /* if the AQ access failed, try the old-fashioned way */ |
| if (status || use_register) |
| val = rd32(hw, reg_addr); |
| |
| return val; |
| } |
| |
| /** |
| * i40e_aq_rx_ctl_write_register |
| * @hw: pointer to the hw struct |
| * @reg_addr: register address |
| * @reg_val: register value |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Use the firmware to write to an Rx control register, |
| * especially useful if the Rx unit is under heavy pressure |
| **/ |
| i40e_status i40e_aq_rx_ctl_write_register(struct i40e_hw *hw, |
| u32 reg_addr, u32 reg_val, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_rx_ctl_reg_read_write *cmd = |
| (struct i40e_aqc_rx_ctl_reg_read_write *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_rx_ctl_reg_write); |
| |
| cmd->address = cpu_to_le32(reg_addr); |
| cmd->value = cpu_to_le32(reg_val); |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_write_rx_ctl - write to an Rx control register |
| * @hw: pointer to the hw struct |
| * @reg_addr: register address |
| * @reg_val: register value |
| **/ |
| void i40e_write_rx_ctl(struct i40e_hw *hw, u32 reg_addr, u32 reg_val) |
| { |
| i40e_status status = 0; |
| bool use_register; |
| int retry = 5; |
| |
| use_register = (((hw->aq.api_maj_ver == 1) && |
| (hw->aq.api_min_ver < 5)) || |
| (hw->mac.type == I40E_MAC_X722)); |
| if (!use_register) { |
| do_retry: |
| status = i40e_aq_rx_ctl_write_register(hw, reg_addr, |
| reg_val, NULL); |
| if (hw->aq.asq_last_status == I40E_AQ_RC_EAGAIN && retry) { |
| usleep_range(1000, 2000); |
| retry--; |
| goto do_retry; |
| } |
| } |
| |
| /* if the AQ access failed, try the old-fashioned way */ |
| if (status || use_register) |
| wr32(hw, reg_addr, reg_val); |
| } |
| |
| /** |
| * i40e_mdio_if_number_selection - MDIO I/F number selection |
| * @hw: pointer to the hw struct |
| * @set_mdio: use MDIO I/F number specified by mdio_num |
| * @mdio_num: MDIO I/F number |
| * @cmd: pointer to PHY Register command structure |
| **/ |
| static void i40e_mdio_if_number_selection(struct i40e_hw *hw, bool set_mdio, |
| u8 mdio_num, |
| struct i40e_aqc_phy_register_access *cmd) |
| { |
| if (set_mdio && cmd->phy_interface == I40E_AQ_PHY_REG_ACCESS_EXTERNAL) { |
| if (hw->flags & I40E_HW_FLAG_AQ_PHY_ACCESS_EXTENDED) |
| cmd->cmd_flags |= |
| I40E_AQ_PHY_REG_ACCESS_SET_MDIO_IF_NUMBER | |
| ((mdio_num << |
| I40E_AQ_PHY_REG_ACCESS_MDIO_IF_NUMBER_SHIFT) & |
| I40E_AQ_PHY_REG_ACCESS_MDIO_IF_NUMBER_MASK); |
| else |
| i40e_debug(hw, I40E_DEBUG_PHY, |
| "MDIO I/F number selection not supported by current FW version.\n"); |
| } |
| } |
| |
| /** |
| * i40e_aq_set_phy_register_ext |
| * @hw: pointer to the hw struct |
| * @phy_select: select which phy should be accessed |
| * @dev_addr: PHY device address |
| * @page_change: flag to indicate if phy page should be updated |
| * @set_mdio: use MDIO I/F number specified by mdio_num |
| * @mdio_num: MDIO I/F number |
| * @reg_addr: PHY register address |
| * @reg_val: new register value |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Write the external PHY register. |
| * NOTE: In common cases MDIO I/F number should not be changed, thats why you |
| * may use simple wrapper i40e_aq_set_phy_register. |
| **/ |
| enum i40e_status_code i40e_aq_set_phy_register_ext(struct i40e_hw *hw, |
| u8 phy_select, u8 dev_addr, bool page_change, |
| bool set_mdio, u8 mdio_num, |
| u32 reg_addr, u32 reg_val, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_phy_register_access *cmd = |
| (struct i40e_aqc_phy_register_access *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_set_phy_register); |
| |
| cmd->phy_interface = phy_select; |
| cmd->dev_address = dev_addr; |
| cmd->reg_address = cpu_to_le32(reg_addr); |
| cmd->reg_value = cpu_to_le32(reg_val); |
| |
| i40e_mdio_if_number_selection(hw, set_mdio, mdio_num, cmd); |
| |
| if (!page_change) |
| cmd->cmd_flags = I40E_AQ_PHY_REG_ACCESS_DONT_CHANGE_QSFP_PAGE; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_phy_register_ext |
| * @hw: pointer to the hw struct |
| * @phy_select: select which phy should be accessed |
| * @dev_addr: PHY device address |
| * @page_change: flag to indicate if phy page should be updated |
| * @set_mdio: use MDIO I/F number specified by mdio_num |
| * @mdio_num: MDIO I/F number |
| * @reg_addr: PHY register address |
| * @reg_val: read register value |
| * @cmd_details: pointer to command details structure or NULL |
| * |
| * Read the external PHY register. |
| * NOTE: In common cases MDIO I/F number should not be changed, thats why you |
| * may use simple wrapper i40e_aq_get_phy_register. |
| **/ |
| enum i40e_status_code i40e_aq_get_phy_register_ext(struct i40e_hw *hw, |
| u8 phy_select, u8 dev_addr, bool page_change, |
| bool set_mdio, u8 mdio_num, |
| u32 reg_addr, u32 *reg_val, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_phy_register_access *cmd = |
| (struct i40e_aqc_phy_register_access *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_get_phy_register); |
| |
| cmd->phy_interface = phy_select; |
| cmd->dev_address = dev_addr; |
| cmd->reg_address = cpu_to_le32(reg_addr); |
| |
| i40e_mdio_if_number_selection(hw, set_mdio, mdio_num, cmd); |
| |
| if (!page_change) |
| cmd->cmd_flags = I40E_AQ_PHY_REG_ACCESS_DONT_CHANGE_QSFP_PAGE; |
| |
| status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details); |
| if (!status) |
| *reg_val = le32_to_cpu(cmd->reg_value); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_write_ddp - Write dynamic device personalization (ddp) |
| * @hw: pointer to the hw struct |
| * @buff: command buffer (size in bytes = buff_size) |
| * @buff_size: buffer size in bytes |
| * @track_id: package tracking id |
| * @error_offset: returns error offset |
| * @error_info: returns error information |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| enum |
| i40e_status_code i40e_aq_write_ddp(struct i40e_hw *hw, void *buff, |
| u16 buff_size, u32 track_id, |
| u32 *error_offset, u32 *error_info, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_write_personalization_profile *cmd = |
| (struct i40e_aqc_write_personalization_profile *) |
| &desc.params.raw; |
| struct i40e_aqc_write_ddp_resp *resp; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_write_personalization_profile); |
| |
| desc.flags |= cpu_to_le16(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD); |
| if (buff_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| |
| desc.datalen = cpu_to_le16(buff_size); |
| |
| cmd->profile_track_id = cpu_to_le32(track_id); |
| |
| status = i40e_asq_send_command(hw, &desc, buff, buff_size, cmd_details); |
| if (!status) { |
| resp = (struct i40e_aqc_write_ddp_resp *)&desc.params.raw; |
| if (error_offset) |
| *error_offset = le32_to_cpu(resp->error_offset); |
| if (error_info) |
| *error_info = le32_to_cpu(resp->error_info); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_get_ddp_list - Read dynamic device personalization (ddp) |
| * @hw: pointer to the hw struct |
| * @buff: command buffer (size in bytes = buff_size) |
| * @buff_size: buffer size in bytes |
| * @flags: AdminQ command flags |
| * @cmd_details: pointer to command details structure or NULL |
| **/ |
| enum |
| i40e_status_code i40e_aq_get_ddp_list(struct i40e_hw *hw, void *buff, |
| u16 buff_size, u8 flags, |
| struct i40e_asq_cmd_details *cmd_details) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_get_applied_profiles *cmd = |
| (struct i40e_aqc_get_applied_profiles *)&desc.params.raw; |
| i40e_status status; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_get_personalization_profile_list); |
| |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF); |
| if (buff_size > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| desc.datalen = cpu_to_le16(buff_size); |
| |
| cmd->flags = flags; |
| |
| status = i40e_asq_send_command(hw, &desc, buff, buff_size, cmd_details); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_find_segment_in_package |
| * @segment_type: the segment type to search for (i.e., SEGMENT_TYPE_I40E) |
| * @pkg_hdr: pointer to the package header to be searched |
| * |
| * This function searches a package file for a particular segment type. On |
| * success it returns a pointer to the segment header, otherwise it will |
| * return NULL. |
| **/ |
| struct i40e_generic_seg_header * |
| i40e_find_segment_in_package(u32 segment_type, |
| struct i40e_package_header *pkg_hdr) |
| { |
| struct i40e_generic_seg_header *segment; |
| u32 i; |
| |
| /* Search all package segments for the requested segment type */ |
| for (i = 0; i < pkg_hdr->segment_count; i++) { |
| segment = |
| (struct i40e_generic_seg_header *)((u8 *)pkg_hdr + |
| pkg_hdr->segment_offset[i]); |
| |
| if (segment->type == segment_type) |
| return segment; |
| } |
| |
| return NULL; |
| } |
| |
| /* Get section table in profile */ |
| #define I40E_SECTION_TABLE(profile, sec_tbl) \ |
| do { \ |
| struct i40e_profile_segment *p = (profile); \ |
| u32 count; \ |
| u32 *nvm; \ |
| count = p->device_table_count; \ |
| nvm = (u32 *)&p->device_table[count]; \ |
| sec_tbl = (struct i40e_section_table *)&nvm[nvm[0] + 1]; \ |
| } while (0) |
| |
| /* Get section header in profile */ |
| #define I40E_SECTION_HEADER(profile, offset) \ |
| (struct i40e_profile_section_header *)((u8 *)(profile) + (offset)) |
| |
| /** |
| * i40e_find_section_in_profile |
| * @section_type: the section type to search for (i.e., SECTION_TYPE_NOTE) |
| * @profile: pointer to the i40e segment header to be searched |
| * |
| * This function searches i40e segment for a particular section type. On |
| * success it returns a pointer to the section header, otherwise it will |
| * return NULL. |
| **/ |
| struct i40e_profile_section_header * |
| i40e_find_section_in_profile(u32 section_type, |
| struct i40e_profile_segment *profile) |
| { |
| struct i40e_profile_section_header *sec; |
| struct i40e_section_table *sec_tbl; |
| u32 sec_off; |
| u32 i; |
| |
| if (profile->header.type != SEGMENT_TYPE_I40E) |
| return NULL; |
| |
| I40E_SECTION_TABLE(profile, sec_tbl); |
| |
| for (i = 0; i < sec_tbl->section_count; i++) { |
| sec_off = sec_tbl->section_offset[i]; |
| sec = I40E_SECTION_HEADER(profile, sec_off); |
| if (sec->section.type == section_type) |
| return sec; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * i40e_ddp_exec_aq_section - Execute generic AQ for DDP |
| * @hw: pointer to the hw struct |
| * @aq: command buffer containing all data to execute AQ |
| **/ |
| static enum |
| i40e_status_code i40e_ddp_exec_aq_section(struct i40e_hw *hw, |
| struct i40e_profile_aq_section *aq) |
| { |
| i40e_status status; |
| struct i40e_aq_desc desc; |
| u8 *msg = NULL; |
| u16 msglen; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, aq->opcode); |
| desc.flags |= cpu_to_le16(aq->flags); |
| memcpy(desc.params.raw, aq->param, sizeof(desc.params.raw)); |
| |
| msglen = aq->datalen; |
| if (msglen) { |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | |
| I40E_AQ_FLAG_RD)); |
| if (msglen > I40E_AQ_LARGE_BUF) |
| desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_LB); |
| desc.datalen = cpu_to_le16(msglen); |
| msg = &aq->data[0]; |
| } |
| |
| status = i40e_asq_send_command(hw, &desc, msg, msglen, NULL); |
| |
| if (status) { |
| i40e_debug(hw, I40E_DEBUG_PACKAGE, |
| "unable to exec DDP AQ opcode %u, error %d\n", |
| aq->opcode, status); |
| return status; |
| } |
| |
| /* copy returned desc to aq_buf */ |
| memcpy(aq->param, desc.params.raw, sizeof(desc.params.raw)); |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_validate_profile |
| * @hw: pointer to the hardware structure |
| * @profile: pointer to the profile segment of the package to be validated |
| * @track_id: package tracking id |
| * @rollback: flag if the profile is for rollback. |
| * |
| * Validates supported devices and profile's sections. |
| */ |
| static enum i40e_status_code |
| i40e_validate_profile(struct i40e_hw *hw, struct i40e_profile_segment *profile, |
| u32 track_id, bool rollback) |
| { |
| struct i40e_profile_section_header *sec = NULL; |
| i40e_status status = 0; |
| struct i40e_section_table *sec_tbl; |
| u32 vendor_dev_id; |
| u32 dev_cnt; |
| u32 sec_off; |
| u32 i; |
| |
| if (track_id == I40E_DDP_TRACKID_INVALID) { |
| i40e_debug(hw, I40E_DEBUG_PACKAGE, "Invalid track_id\n"); |
| return I40E_NOT_SUPPORTED; |
| } |
| |
| dev_cnt = profile->device_table_count; |
| for (i = 0; i < dev_cnt; i++) { |
| vendor_dev_id = profile->device_table[i].vendor_dev_id; |
| if ((vendor_dev_id >> 16) == PCI_VENDOR_ID_INTEL && |
| hw->device_id == (vendor_dev_id & 0xFFFF)) |
| break; |
| } |
| if (dev_cnt && i == dev_cnt) { |
| i40e_debug(hw, I40E_DEBUG_PACKAGE, |
| "Device doesn't support DDP\n"); |
| return I40E_ERR_DEVICE_NOT_SUPPORTED; |
| } |
| |
| I40E_SECTION_TABLE(profile, sec_tbl); |
| |
| /* Validate sections types */ |
| for (i = 0; i < sec_tbl->section_count; i++) { |
| sec_off = sec_tbl->section_offset[i]; |
| sec = I40E_SECTION_HEADER(profile, sec_off); |
| if (rollback) { |
| if (sec->section.type == SECTION_TYPE_MMIO || |
| sec->section.type == SECTION_TYPE_AQ || |
| sec->section.type == SECTION_TYPE_RB_AQ) { |
| i40e_debug(hw, I40E_DEBUG_PACKAGE, |
| "Not a roll-back package\n"); |
| return I40E_NOT_SUPPORTED; |
| } |
| } else { |
| if (sec->section.type == SECTION_TYPE_RB_AQ || |
| sec->section.type == SECTION_TYPE_RB_MMIO) { |
| i40e_debug(hw, I40E_DEBUG_PACKAGE, |
| "Not an original package\n"); |
| return I40E_NOT_SUPPORTED; |
| } |
| } |
| } |
| |
| return status; |
| } |
| |
| /** |
| * i40e_write_profile |
| * @hw: pointer to the hardware structure |
| * @profile: pointer to the profile segment of the package to be downloaded |
| * @track_id: package tracking id |
| * |
| * Handles the download of a complete package. |
| */ |
| enum i40e_status_code |
| i40e_write_profile(struct i40e_hw *hw, struct i40e_profile_segment *profile, |
| u32 track_id) |
| { |
| i40e_status status = 0; |
| struct i40e_section_table *sec_tbl; |
| struct i40e_profile_section_header *sec = NULL; |
| struct i40e_profile_aq_section *ddp_aq; |
| u32 section_size = 0; |
| u32 offset = 0, info = 0; |
| u32 sec_off; |
| u32 i; |
| |
| status = i40e_validate_profile(hw, profile, track_id, false); |
| if (status) |
| return status; |
| |
| I40E_SECTION_TABLE(profile, sec_tbl); |
| |
| for (i = 0; i < sec_tbl->section_count; i++) { |
| sec_off = sec_tbl->section_offset[i]; |
| sec = I40E_SECTION_HEADER(profile, sec_off); |
| /* Process generic admin command */ |
| if (sec->section.type == SECTION_TYPE_AQ) { |
| ddp_aq = (struct i40e_profile_aq_section *)&sec[1]; |
| status = i40e_ddp_exec_aq_section(hw, ddp_aq); |
| if (status) { |
| i40e_debug(hw, I40E_DEBUG_PACKAGE, |
| "Failed to execute aq: section %d, opcode %u\n", |
| i, ddp_aq->opcode); |
| break; |
| } |
| sec->section.type = SECTION_TYPE_RB_AQ; |
| } |
| |
| /* Skip any non-mmio sections */ |
| if (sec->section.type != SECTION_TYPE_MMIO) |
| continue; |
| |
| section_size = sec->section.size + |
| sizeof(struct i40e_profile_section_header); |
| |
| /* Write MMIO section */ |
| status = i40e_aq_write_ddp(hw, (void *)sec, (u16)section_size, |
| track_id, &offset, &info, NULL); |
| if (status) { |
| i40e_debug(hw, I40E_DEBUG_PACKAGE, |
| "Failed to write profile: section %d, offset %d, info %d\n", |
| i, offset, info); |
| break; |
| } |
| } |
| return status; |
| } |
| |
| /** |
| * i40e_rollback_profile |
| * @hw: pointer to the hardware structure |
| * @profile: pointer to the profile segment of the package to be removed |
| * @track_id: package tracking id |
| * |
| * Rolls back previously loaded package. |
| */ |
| enum i40e_status_code |
| i40e_rollback_profile(struct i40e_hw *hw, struct i40e_profile_segment *profile, |
| u32 track_id) |
| { |
| struct i40e_profile_section_header *sec = NULL; |
| i40e_status status = 0; |
| struct i40e_section_table *sec_tbl; |
| u32 offset = 0, info = 0; |
| u32 section_size = 0; |
| u32 sec_off; |
| int i; |
| |
| status = i40e_validate_profile(hw, profile, track_id, true); |
| if (status) |
| return status; |
| |
| I40E_SECTION_TABLE(profile, sec_tbl); |
| |
| /* For rollback write sections in reverse */ |
| for (i = sec_tbl->section_count - 1; i >= 0; i--) { |
| sec_off = sec_tbl->section_offset[i]; |
| sec = I40E_SECTION_HEADER(profile, sec_off); |
| |
| /* Skip any non-rollback sections */ |
| if (sec->section.type != SECTION_TYPE_RB_MMIO) |
| continue; |
| |
| section_size = sec->section.size + |
| sizeof(struct i40e_profile_section_header); |
| |
| /* Write roll-back MMIO section */ |
| status = i40e_aq_write_ddp(hw, (void *)sec, (u16)section_size, |
| track_id, &offset, &info, NULL); |
| if (status) { |
| i40e_debug(hw, I40E_DEBUG_PACKAGE, |
| "Failed to write profile: section %d, offset %d, info %d\n", |
| i, offset, info); |
| break; |
| } |
| } |
| return status; |
| } |
| |
| /** |
| * i40e_add_pinfo_to_list |
| * @hw: pointer to the hardware structure |
| * @profile: pointer to the profile segment of the package |
| * @profile_info_sec: buffer for information section |
| * @track_id: package tracking id |
| * |
| * Register a profile to the list of loaded profiles. |
| */ |
| enum i40e_status_code |
| i40e_add_pinfo_to_list(struct i40e_hw *hw, |
| struct i40e_profile_segment *profile, |
| u8 *profile_info_sec, u32 track_id) |
| { |
| i40e_status status = 0; |
| struct i40e_profile_section_header *sec = NULL; |
| struct i40e_profile_info *pinfo; |
| u32 offset = 0, info = 0; |
| |
| sec = (struct i40e_profile_section_header *)profile_info_sec; |
| sec->tbl_size = 1; |
| sec->data_end = sizeof(struct i40e_profile_section_header) + |
| sizeof(struct i40e_profile_info); |
| sec->section.type = SECTION_TYPE_INFO; |
| sec->section.offset = sizeof(struct i40e_profile_section_header); |
| sec->section.size = sizeof(struct i40e_profile_info); |
| pinfo = (struct i40e_profile_info *)(profile_info_sec + |
| sec->section.offset); |
| pinfo->track_id = track_id; |
| pinfo->version = profile->version; |
| pinfo->op = I40E_DDP_ADD_TRACKID; |
| memcpy(pinfo->name, profile->name, I40E_DDP_NAME_SIZE); |
| |
| status = i40e_aq_write_ddp(hw, (void *)sec, sec->data_end, |
| track_id, &offset, &info, NULL); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_add_cloud_filters |
| * @hw: pointer to the hardware structure |
| * @seid: VSI seid to add cloud filters from |
| * @filters: Buffer which contains the filters to be added |
| * @filter_count: number of filters contained in the buffer |
| * |
| * Set the cloud filters for a given VSI. The contents of the |
| * i40e_aqc_cloud_filters_element_data are filled in by the caller |
| * of the function. |
| * |
| **/ |
| enum i40e_status_code |
| i40e_aq_add_cloud_filters(struct i40e_hw *hw, u16 seid, |
| struct i40e_aqc_cloud_filters_element_data *filters, |
| u8 filter_count) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_remove_cloud_filters *cmd = |
| (struct i40e_aqc_add_remove_cloud_filters *)&desc.params.raw; |
| enum i40e_status_code status; |
| u16 buff_len; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_add_cloud_filters); |
| |
| buff_len = filter_count * sizeof(*filters); |
| desc.datalen = cpu_to_le16(buff_len); |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| cmd->num_filters = filter_count; |
| cmd->seid = cpu_to_le16(seid); |
| |
| status = i40e_asq_send_command(hw, &desc, filters, buff_len, NULL); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_add_cloud_filters_bb |
| * @hw: pointer to the hardware structure |
| * @seid: VSI seid to add cloud filters from |
| * @filters: Buffer which contains the filters in big buffer to be added |
| * @filter_count: number of filters contained in the buffer |
| * |
| * Set the big buffer cloud filters for a given VSI. The contents of the |
| * i40e_aqc_cloud_filters_element_bb are filled in by the caller of the |
| * function. |
| * |
| **/ |
| enum i40e_status_code |
| i40e_aq_add_cloud_filters_bb(struct i40e_hw *hw, u16 seid, |
| struct i40e_aqc_cloud_filters_element_bb *filters, |
| u8 filter_count) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_remove_cloud_filters *cmd = |
| (struct i40e_aqc_add_remove_cloud_filters *)&desc.params.raw; |
| i40e_status status; |
| u16 buff_len; |
| int i; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_add_cloud_filters); |
| |
| buff_len = filter_count * sizeof(*filters); |
| desc.datalen = cpu_to_le16(buff_len); |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| cmd->num_filters = filter_count; |
| cmd->seid = cpu_to_le16(seid); |
| cmd->big_buffer_flag = I40E_AQC_ADD_CLOUD_CMD_BB; |
| |
| for (i = 0; i < filter_count; i++) { |
| u16 tnl_type; |
| u32 ti; |
| |
| tnl_type = (le16_to_cpu(filters[i].element.flags) & |
| I40E_AQC_ADD_CLOUD_TNL_TYPE_MASK) >> |
| I40E_AQC_ADD_CLOUD_TNL_TYPE_SHIFT; |
| |
| /* Due to hardware eccentricities, the VNI for Geneve is shifted |
| * one more byte further than normally used for Tenant ID in |
| * other tunnel types. |
| */ |
| if (tnl_type == I40E_AQC_ADD_CLOUD_TNL_TYPE_GENEVE) { |
| ti = le32_to_cpu(filters[i].element.tenant_id); |
| filters[i].element.tenant_id = cpu_to_le32(ti << 8); |
| } |
| } |
| |
| status = i40e_asq_send_command(hw, &desc, filters, buff_len, NULL); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_rem_cloud_filters |
| * @hw: pointer to the hardware structure |
| * @seid: VSI seid to remove cloud filters from |
| * @filters: Buffer which contains the filters to be removed |
| * @filter_count: number of filters contained in the buffer |
| * |
| * Remove the cloud filters for a given VSI. The contents of the |
| * i40e_aqc_cloud_filters_element_data are filled in by the caller |
| * of the function. |
| * |
| **/ |
| enum i40e_status_code |
| i40e_aq_rem_cloud_filters(struct i40e_hw *hw, u16 seid, |
| struct i40e_aqc_cloud_filters_element_data *filters, |
| u8 filter_count) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_remove_cloud_filters *cmd = |
| (struct i40e_aqc_add_remove_cloud_filters *)&desc.params.raw; |
| enum i40e_status_code status; |
| u16 buff_len; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_remove_cloud_filters); |
| |
| buff_len = filter_count * sizeof(*filters); |
| desc.datalen = cpu_to_le16(buff_len); |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| cmd->num_filters = filter_count; |
| cmd->seid = cpu_to_le16(seid); |
| |
| status = i40e_asq_send_command(hw, &desc, filters, buff_len, NULL); |
| |
| return status; |
| } |
| |
| /** |
| * i40e_aq_rem_cloud_filters_bb |
| * @hw: pointer to the hardware structure |
| * @seid: VSI seid to remove cloud filters from |
| * @filters: Buffer which contains the filters in big buffer to be removed |
| * @filter_count: number of filters contained in the buffer |
| * |
| * Remove the big buffer cloud filters for a given VSI. The contents of the |
| * i40e_aqc_cloud_filters_element_bb are filled in by the caller of the |
| * function. |
| * |
| **/ |
| enum i40e_status_code |
| i40e_aq_rem_cloud_filters_bb(struct i40e_hw *hw, u16 seid, |
| struct i40e_aqc_cloud_filters_element_bb *filters, |
| u8 filter_count) |
| { |
| struct i40e_aq_desc desc; |
| struct i40e_aqc_add_remove_cloud_filters *cmd = |
| (struct i40e_aqc_add_remove_cloud_filters *)&desc.params.raw; |
| i40e_status status; |
| u16 buff_len; |
| int i; |
| |
| i40e_fill_default_direct_cmd_desc(&desc, |
| i40e_aqc_opc_remove_cloud_filters); |
| |
| buff_len = filter_count * sizeof(*filters); |
| desc.datalen = cpu_to_le16(buff_len); |
| desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD)); |
| cmd->num_filters = filter_count; |
| cmd->seid = cpu_to_le16(seid); |
| cmd->big_buffer_flag = I40E_AQC_ADD_CLOUD_CMD_BB; |
| |
| for (i = 0; i < filter_count; i++) { |
| u16 tnl_type; |
| u32 ti; |
| |
| tnl_type = (le16_to_cpu(filters[i].element.flags) & |
| I40E_AQC_ADD_CLOUD_TNL_TYPE_MASK) >> |
| I40E_AQC_ADD_CLOUD_TNL_TYPE_SHIFT; |
| |
| /* Due to hardware eccentricities, the VNI for Geneve is shifted |
| * one more byte further than normally used for Tenant ID in |
| * other tunnel types. |
| */ |
| if (tnl_type == I40E_AQC_ADD_CLOUD_TNL_TYPE_GENEVE) { |
| ti = le32_to_cpu(filters[i].element.tenant_id); |
| filters[i].element.tenant_id = cpu_to_le32(ti << 8); |
| } |
| } |
| |
| status = i40e_asq_send_command(hw, &desc, filters, buff_len, NULL); |
| |
| return status; |
| } |